I N D U S T R I A L W E I G H I N G & A U T O M A T I O N S Y S T E M S

Leon-Engineering

Weigh Feeder- LEMC

w w w . l e o n - e n g i n e e r i n g . c o m

Product Description

LEMC weighfeeders are used to control or monitor the �owrate and totalise the amount of material passing over the conveyor.Applications in industry are wide and diverse. Weighfeeders are commonly used to maintain a �owrate at some critical level. For example; a �uid bed drier can dry sand at 5 tonnes per hour. If the �owrate falls below this level, the drier is ine�cient. If it rises above this level, the drier will not dry the sand su�ciently. The solution is a weighfeeder feeding the sand at say 4.8 tonnes per hour, resulting in a reliable operation at peak e�ciency, with product quality being maintained. Moreover, weighfeeders are used to control the �ow of materials, multiple units are often set up to create a continuous blend of solids to a desired recipe. This may involve one master feeder and several slaves, each feeding a preset percentage, or a simple pair of weighfeeders provid-ing a desired mix of materials. Also,w eighfeeders are used to monitor incoming materials for inven-tory control and outgoing, processed material to check on true production rates. They may also be used to batch out a desired amount of material where bin weighing is not practical.

Basic Features

Sealed, direct drive, AC gearmotor.High resolution loadcell.Full overload protection for loadcell.2 belt scrapers; 1 internal, 1 external.Side guards (when required).Belt steering by crowned end drums Automatic pneumatic belt steering Electrostatic powder coated �nish.Stainless steel impact plate.Plated head and tail drums.Belt run-o� limit switches.Calibration weights provided.Sealed, labelled junction box.Easy belt removal from one side.