Volume 5 Kenstan - · PDF fileVolume 5 Catalog Keymatic Line of ... Keys Keymatic K 4 2 S V E...
Transcript of Volume 5 Kenstan - · PDF fileVolume 5 Catalog Keymatic Line of ... Keys Keymatic K 4 2 S V E...
Volume 5Cata log
Keymatic Line of Locks
KenstanL O C K C O M P A N Y
K3
K2
K5
K10
K9
K8
K7
K12
K13
K14
K1
K11
K6
Introduction
Cam Locks
Drawer/Door Locks
Gang Locks
Snap Bolt Lock
Plunger Locks
Z Bolt Locks
Ratchet Locks
Keys
Keym
atic
K4
XS V E2
Volume 5Cata log
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Introduction
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SN Satin Nickel
KeymaticLineofLocks
Our K line offers excellent security in a variety of lock types that can be keyed to thousands of different key codes. Each key code has eight individual operating keys 1 through 8, used one at a time to operate the lock. Our Red Change Tool can reset the lock to allow a new operating key (within the assigned code) to open the lock any time a key is lost or stolen – truly eight locks in one.
Locks can be keyed alike, individually or in groups
DeliveryAt Kenstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within two weeks from the receipt of your order. Rush orders and emergency services are available.
PlatingThe K line standard plating finish is Polished Nickel.
A wide range of special plating finishes is also available, including Satin Nickel, Polished Brass, Matte Black, Statuary Bronze, Satin Brass and Custom Finishes to match your showcase hardware.
Pleasenote: Extended lead-time and plating lot charges may apply to Special and Custom finishes. Please call Kenstan for details.
Key ControlKeymatic locks and keys are built to a high level of precision, mak-ing key duplication very difficult. Please note: We recommend our factory original key for smooth lock operation. Use of non-Kenstan copy will void the Kenstan warranty on our locks.
We can register your keys and maintain your key plans by store, retail department, showcase/cabinets, or office and we maintain a historical database of key numbers.
All operating keys are stamped with a two-digit, alpha numeric date code, a four-digit, numeric Keymatic code and a one-digit, numeric setting code (from 1 to 8) with a matching color coded key cover. The Red Change Tool is stamped with the same code as the oper-ating key, except without the setting code.
Key Retaining vs. Non-Key Retaining Lock FunctionThe K line standard operation is a key retaining function (captive), which means that the operating key can be removed in the locked position only; therefore, the lock cannot be accidentally left in the open/unlocked position.
K locks can also be supplied as non-key retaining (non-captive), which allows the key to be removed in both the locked and unlocked position.
Designer Note: For true captive operation, the use of our captive key locks must be coordinated with sliding door showcase design. The use of non by-passing sliding doors is recommended to restrict door movement and ensure key removal only when the doors are in the secure position.
PN Polished Nickel
KeymaticLine K1
Standard Plating Finish
Custom Plating Finish
Special Plating Finishes
* Extended lead-time and plating lot charges may apply to Special and Custom finishes. Please call Kenstan for details.
*
*
KenstanL O C K C O M P A N Y
Cam Type Price
STRAIGHT
101 5/8” $ 0.00 102 3/4” 0.00103 7/8” 0.00104 1” 0.00105 1-1/8” 0.00106 1-1/4” Std.107 1-3/8” 0.45108 1-1/2” 0.45110 1-3/4” 0.45112 2” 0.50116 2-1/2” 0.50
1/8” OFFSET
303 7/8” 0.60306 1-1/4” 0.65308 1-1/2” 0.65312 2” 0.70
1/4” OFFSET
403 7/8” 0.60404 1” 0.65406 1-1/4” 0.65408 1-1/2” 0.65410 1-3/4” 0.65412 2” 0.70414 2-1/4” 0.70
3/8” OFFSET
504 1” 0.65506 1-1/4” 0.65508 1-1/2” 0.65512 2” 0.70
1/2” OFFSET
606 1-1/4” 0.65608 1-1/2” 0.65610 1-3/4” 0.65612 2” 0.70
5/8” OFFSET
712 2” 2.00
HOOK
202 3/4” 0.60204 1” 0.65206 1-1/4” 0.65208 1-1/2” 0.65210 1-3/4” 0.65
PIN CAM
P604 9/16” offset 4.95
FOR SWITCH KIT
SL No Cam* 0.00
H
Note: All Cam Locks come with a 1-1/4” Straight Cam unless a different cam is chosen.
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
*Switch option available. See Page A10 to order switch kit.
F GBA D EC
CL K051203PNYW106
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
A
B
C
D
E
F
Prices vary acco
rdin
g to
qu
antity o
rdered
.
Lock StyleCL Cam Lock
Core TypeK Keymatic
Housing Length Price MAXIMUM MATERIAL THICKNESS
BARREL WOOD METAL GLASS LENGTH
02 7/16” 1/4” 11/16” $21.1603 9/16” 5/8” 1/2” 15/16” 21.9404* 3/4” 7/8” 11/16” 1-1/8” 22.7105 1-1/8” 1-1/8” 1” 1-1/2” 23.4810 1-5/8” 1-13/16” 39.5911 1-7/8” 2” 40.3612 2-3/16” 2-3/8” 41.1313 2-1/2” 2-13/16” 41.9114 2-3/4” 3” 42.6815 3” 3-3/8” 43.45
Cam Rotation LOCKED OPEN
0312 3 12 0306 3 6 0309 3 9 0603 6 3 0612 6 12 0609 6 9 0912 9 12 0903 9 3 0906 9 6 1203 12 3 1206 12 6 1209 12 9
Plating Finish Extended lead-time and plating lot charges may apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingY Yes Std.N No 1.25
Material InstallationW Wood 0.00M Metal 0.00GR Glass with Round Hole 2.95GD Glass with Double “D” Hole 1.95O Other - No Mounting Hardware 0.00
Note: Keys are not included with this lock. See page 14 to order keys.
H
G
Spe
cial
Fin
ish
Continued
LOCK
FACE SLEEVE
EXTENSION ROUND
MOUNTING SCREWS
ANTI-ROTATION PLATE
WASHER
STRAIGHT CAM
EXTENSION SLEEVE
SEM-SCREW
CamLock CL
KeymaticLine K3
HOUSING LENGTHS 10, 11, 12, 13, 14 and 15
HOUSING LENGTHS 02, 03, 04 and 05
BARREL LENGTH
1/8” TYP.
3/4” TYP.
7/8” TYP.
1/4”
5/8” TYP.
7/8” TYP.
MAXIMUM MATERIAL
THICKNESS
B
A
1/8”
WASHER
1-1/4” TYP.
1-1/4” TYP.
3/8”
7/8” EXTENSION SLEEVE
ANTI-ROTATION PLATEFACE
SLEEVE
SCREW
BARREL LENGTH
CAM LOCK – EXPLODED VIEW
SET SCREW
VERTICAL FLATS
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Data Sheet
MAXIMUM MATERIAL
THICKNESS
METAL INSTALLATION M
GLASS INSTALLATION - ROUND HOLE GR
GLASS INSTALLATION - DOUBLE D HOLE GD
Note: All Offset cams are reversible.
CAM LOCK (CUT DOUBLE D HOLE ON SHEET METAL)
THREE TAB WASHER
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PREVENT NUT FROM BACKING OUT)
CAM LOCK
ANTI-ROTATION THREE TAB WASHER
GLASS
FIXING WASHER
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PREVENT NUT FROM BACKING OUT)
ANTI-ROTATION “L” BRACKET
FLAT METAL WASHER
CAM LOCK ANTI-ROTATION THREE TAB WASHER
PLASTIC WASHERS
PLASTIC WASHERS
GLASS
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PREVENT NUT FROM BACKING OUT)
CAM TYPES
TABS BENT OVER TO PREVENT NUT FROM BACKING OUT
SMALL THREE TAB WASHER
TABS BENT OVER TO PREVENT NUT FROM BACKING OUT
SMALL THREE TAB WASHER
SMALL THREE TAB WASHER
TABS BENT OVER TO PREVENT NUT FROM BACKING OUT
G
G
G
H
LOCKED @ 12 OPEN @ 3
12
3
All 180 degree rotations are clockwise, unless specified.
WOOD INSTALLATION W
CAM LOCK
CAM
LARGE HEX NUT
ANTI-ROTATION MOUNTING PLATE
# 6 INSTALLATION SCREWS
# 6 NUT RETENTION SCREWS
CAM ROTATION EXAMPLE
SMALL THREE TAB WASHER
HEX NUT
TABS BENT OVER TO PREVENT NUT FROM
BACKING OUT
D
G
CAM ADAPTER
NOTE: # 6 SCREW USED TO PREVENT INSTALLATION NUT FROM BACKING OUT.
C
C
Dimension from center of hole to the edge of glass is 1-1/4”
LENGTH
OFFSET DIM
LENGTHLENGTH
Straight Cam Offset Cam Hook Cam Pin Cam
3/8”
1-1/4”
1/4” DIA.
9/16”
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Prices vary acco
rdin
g to
qu
antity o
rdered
.
“Throw” (distance bolt travels from the locked to unlocked position) is 5/16”.
All dimensions shown are in the locked position.
K4
DL Drawer/DoorLockKenstanL O C K C O M P A N Y
KeymaticLine
CBA D E F
DL K S 2001 PN Y
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
34103411(shown)
5/8”
1-5/16”
2001200220032004
SML
1/4” TYP.
1-3/8” TYP.7/8” TYP.
2”
1-7/16”
5/8”
5/32” DIA. TYP.
2205 1-1/4”
1/8”
3/8”
3209
5/16”
3/8”3/4”
A
B
C
E
F
Lock StyleDL Drawer/Door Lock
Core TypeK Keymatic
Housing Length PriceS 13/16” $24.38 M 1-1/16” 26.24L 1-3/16” 28.80
Bolt TypeSTRAIGHT BOLT
2001 1-1/16” Std.2002 1-11/16” 0.102003 2-5/16” 0.202004 3-1/8” 0.30
3/8” OFFSET BOLT
2205 1-5/8” 0.60
DIECAST SPRING BOLT
3209 1-5/16” Std. 2.03
INVERTED SLIDING SPRING BOLT
3410 1-5/16” Left 9.973411 1-5/16” Right 9.97
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key Retaining
* Option available only on Straight Bolt and 3/8” Offset Bolt models.
N No 1.25Y* Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
D
INVERTED SLIDING SPRING BOLT
STRAIGHT BOLT
3/8” OFFSET BOLT
DIECAST SPRING BOLT (3/16” bolt engagement recommended)
Spe
cial
Fin
ish
HOUSING LENGTHCD
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
26242636264826CL30243036304830CL
24242436244824CL28242836284828CL
5/8”
15/16” LOCKED DOWN
2”
1-7/16”
5/32” DIA. TYP.
CBA D E F
GL K S 2448 PN Y
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
KenstanL O C K C O M P A N Y GangLock GL
KeymaticLine K5
SML
7/8” TYP.
1/4” TYP.
1-3/8”
2” 1/16”
Gang Lock PackagesTo determine your item number enter the RED option code for each section as in the example below.
A
B
C
PackageGANG
Number of Drawers Price2 $ 6.863 9.93 4 13.76
Pin LengthA 5/8” B 3/4” C 1-1/8” D 1-7/8”
CBA
GANG 3C
GANG3C A kit with three adjustable stops, three 1-1/8” pins, three lock washers, and four closed bar guides.
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
A
B
C
D
E
F
Lock StyleGL Gang Lock
Core TypeK Keymatic
Housing Length PriceS 13/16” $23.47M 1-1/16” 25.28L 1-3/16” 27.77
Mount Style/Bar LengthFRONT MOUNT LOCKED UP
2424 24” 7.75 2436 36” 9.10 2448 48” 19.9524CL Custom Call24NO No Bar 1.07 SIDE MOUNT LOCKED UP
2624 24” 7.752636 36” 9.10 2648 48” 19.95 26CL Custom CallFRONT MOUNT LOCKED DOWN
2824 24” 7.75 2836 36” 9.10 2848 48” 19.9528CL Custom Call28NO No Bar 1.07 SIDE MOUNT LOCKED DOWN
3024 24” 7.75 3036 36” 9.10 3048 48” 19.95 30CL Custom Call
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
FRONT MOUNT – SIDE VIEW
SIDE MOUNT (Shown with a Gang 3C Kit)
FRONT MOUNT – FRONT VIEW
FRONT MOUNT (Shown with a Gang 3C Kit)
Not
ch fo
r P
in m
ust
be o
n B
otto
m o
f Dra
wer
Not
ch fo
r P
in m
ust
be o
n To
p of
Dra
wer
1-1/4” LOCKED UP
Throw (distance bolt travels from the locked to unlocked position) is 5/16”.
Spe
cial
Fin
ish
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
All dimensions shown are in the locked position.
K6
DL36 SnapBoltLockKenstanL O C K C O M P A N Y
KeymaticLine
CBA D E F
DL K M 36 PN N
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
Lock StyleDL Drawer/Door Lock
Core TypeK Keymatic
Housing Length PriceS 13/16” $28.22 M 1-1/16” 30.08L 1-3/16” 32.64
Bolt Type SNAP BOLT
36 3/4”
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No Std.
Note: Keys are not included with this lock. See page K14 to order keys.
ISOMETRIC VIEW
SML
3/8”
STRIKE
1-3/16”.83
.83
1-1/8”
1-1/8”
7/8”
2”
1-7/16”
1-3/8”
53/64”REF.
1-5/8”
1-5/8”
STRIKE SIDE VIEWSTRIKE FRONT VIEW
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
A
B
C
D
E
F
SNAP BOLT
3/16”
STRIKE TOP VIEW
1-1/8”9/16”
5/16”
1/4”1-1/8”
1-5/8”
5/8”
.166” DIA..170
9/16”
7/16”
1/2”
Spe
cial
Fin
ish
HOUSING LENGTH
5/32” DIA. TYP.
D C
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y PlungerLock PL40
KeymaticLine K7
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
CBA D E F
PL K 40 S3 PN Y
Prices vary acco
rdin
g to
qu
antity o
rdered
.
ROUND EXTENDED SERIES (Plunger travels 9/16”)
ROUND SERIES
S1S2S3
3/16” THRU TYP.
7/8” TYP.
1-1/2” TYP.1/2”
3/8”
1-1/4” TYP.
7/8” TYP. 2”
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style40 Oval Flange
Plunger Type/Length PriceS SERIES
S1 3/8” $27.75S2 7/16” 27.55S3 5/8” 27.35
T SERIES
T1 1/4” 32.12T3 9/16” 32.02
ROUND SERIES
R1 3/8” 28.36R2 7/16” 28.10R3 9/16” 27.85
ROUND EXTENDED SERIES
R4 1-3/16” 32.78R5 1-5/16” 32.88R6 1-11/16” 32.98R7 2-7/16” 33.08
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
T1T3
1/8”
STRIKE PLATE
1/2”
1/16”
1-1/8”
R1R2R3
3/8”1”
R4R5R6R7
1/4” EXTENSION DIAMETER
EXTENSION PIN WILL NOT RETRACT INTO HOUSING
3/8” PLUNGER DIAMETER
1”
S SERIES
All dimensions shown are in the locked position.
T SERIES
A
B
C
D
E
F
1/16”
Spe
cial
Fin
ish
D
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
K8
PL45 Plunger LockKenstanL O C K C O M P A N Y
KeymaticLine
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
R1R2R3 3/8”
5/8”
1-1/8”
T1T3
1/8”
1/2”
1/16”
CBA D E F
PL K 45 S3 PN Y
R4R5R6R7
5/8”
1/4” EXTENSION PIN DIAMETER
EXTENSION PIN WILL NOT RETRACT INTO HOUSING
PIN
3/8” PLUNGER DIAMETER
1-1/8”
ROUND EXTENDED SERIES (Plunger travels 9/16”)
S SERIES
S1S2S3
7/8” TYP.
1-1/4”
1/2”
#4-40 (STANDARD)
T SERIES
All dimensions shown are in the locked position.
Prices vary acco
rdin
g to
qu
antity o
rdered
.
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style45 No Flange
Plunger Type/Length PriceS SERIES
S1 3/8” $28.29S2 7/16” 28.08S3 5/8” 27.88
T SERIES
T1 1/4” 32.65T3 9/16” 32.55
ROUND SERIES
R1 3/8” 28.89R2 7/16” 28.64R3 9/16” 28.39
ROUND EXTENDED SERIES
R4 1-3/16” 33.31R5 1-5/16” 33.41R6 1-11/16” 33.51R7 2-7/16” 33.61
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
A
B
C
D
E
F
ROUND SERIES
3/8”
3/8”
Spe
cial
Fin
ish
D
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y PlungerLock PL49
KeymaticLine K9
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
CBA D E F
PL K 49 X PN Y
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
THROUGH THE TRACK PLUNGER
1”
1/2”
5/16”
9/32”
7/16”
1/8”
1-3/16”
15/32”
1/8”
27/64”
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style Price49 Through the Track $39.95
Plunger
Plunger Type X No Option
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
“Throw” (distance bolt travels from the locked to unlocked position) is 7/16”.
All dimensions shown are in the locked position.
A
B
C
D
C
F
13/16”
19/32”
1/32”
ISOMETRIC VIEW WITH METAL TRACK
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
K10
PL50 PlungerLockKenstanL O C K C O M P A N Y
KeymaticLine
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
PARTS INCLUDED QTY.
a DOUGHNUT 1
b J BRACKET 1 (anti-rotation)
c PLASTIC WASHER 2
d PLASTIC SPACER 1
e SCREW 4
L3
3/8”
1-1/8”
1/8”
7/8”
1/8”
S1S2S3
7/8” TYP.
1-1/4” TYP.
1/2”
1/16” TYP. 1/2” TYP.
7/8” TYP.
3/8”
1-1/2” TYP.
1/8”
REAR GLASS
f
a
c
cFRONT GLASS
d
e
cd
a
c e
a DOUGHNUT
b J BRACKET (anti-rotation)
c PLASTIC WASHER
d PLASTIC SPACER
e SCREW
f STRIKE PLATE
T SERIES INSTALLATION
CBA D E F
PL K 50 S3 PN Y
S SERIES (Parts included same as Round Series)
Prices vary acco
rdin
g to
qu
antity o
rdered
.
A
C
D
E
F
B
C
D
R4R5R6R7
R1R2R3
1/4” EXTENSION PIN DIAMETER
3/8” PLUNGER
DIAMETER
EXTENSION PIN WILL NOT RETRACT INTO HOUSING
a DOUGHNUT 1
c PLASTIC WASHER 2
d PLASTIC SPACER 1
e SCREW 4
PARTS INCLUDED QTY.
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style50 Round Flange
Plunger Type/Length PriceS SERIES
S1 3/8” $36.67 S2 7/16” 36.45 S3 5/8” 36.25
T SERIES
T1 1/4” 43.51 T3 9/16” 43.40
T SERIES
L3 3/8” 39.95
ROUND SERIES
R1 3/8” 37.34 R2 7/16” 37.07 R3 9/16” 36.80
ROUND EXTENDED SERIES
R4 1-3/16” 42.15 R5 1-5/16” 42.26 R6 1-11/16” 42.37 R7 2-7/16” 42.48
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
T1T3
STRIKE PLATE
1/8”
1/16”
1-1/8” TYP.
PARTS INCLUDED QTY.a DOUGHNUT 2
b J BRACKET 1 (anti-rotation)
c PLASTIC WASHER 4
d PLASTIC SPACER 2
e SCREW 8
f STRIKE PLATE 1
ROUND SERIES (Plunger travels 9/16”)
L SERIES
T SERIES
All dimensions shown are in the locked position.
1.19” HOLE DIAMETER
b
Spe
cial
Fin
ish
D
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y PlungerLock PL51
KeymaticLine K11
All dimensions shown are in the locked position.
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
CBA D E F
PL K 51 B6 PN N
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
a
e
KEY HOLE LOCK – EXPLODED VIEW
a HOUSING
c RUBBER WASHER
d BACK PLATE
e MOUNTING SCREWS
MATERIAL
SHORT PLUNGER
1-1/8”TYP.
B3,B4
1/8” TYP.
PLUNGERLENGTH
1”TYP.
5/8” TYP.
MATERIALTHICKNESS
1/4” TYP.
cdc
Lock StylePL Plunger Lock
Core TypeK Keymatic
Housing Style51 Key Hole Lock
Material Thickness/Plunger Price MATERIAL PLUNGER
THICKNESS LENGTH
SHORT BACK 1.20
B3 1/4” 3/4” Std. $32.15B4 3/8” 5/8” 32.25
LONG BACK 2.08
B6 1/4” 1-1/2” Std. 31.18B7 3/8” 1-3/8” 31.27B8 7/8” 1-1/32” 31.36
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No Std.Y Yes 0.00
Note: Keys are not included with this lock. See page K14 to order keys.
LONG PLUNGER
B6,B7,B8
PLUNGERLENGTH
MATERIALTHICKNESS
A
B
C
D
E
F
Spe
cial
Fin
ish
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
K12
ZL38 ZBoltLockKenstanL O C K C O M P A N Y
KeymaticLine
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
CBA D E F
ZL K 38 Z1 PN Y
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
A
B
C
D
E
F
Lock StyleZL Z Bolt Lock
Core TypeK Keymatic
Housing Style38 Sliding Door
Dead Bolt
Plunger Type/Length PriceSMALL HOUSING BOLT
Z1 5/16” Std. $25.85Z2 1/2” 26.16Z3 13/16” 26.36
LARGE HOUSING BOLT
Z5 5/16” Std. 35.65Z6 1/2” 35.98
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95PB Polished Brass 3.35SB Satin Brass 3.35BL Matte Black 3.35ST Statuary Bronze 3.35CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Note: Keys are not included with this lock. See page K14 to order keys.
Z1Z2Z3
9/16”
5/8”
1/8” BOLT THICKNESS
5/8”7/8”
3/4”
3/4” 1”
1”
7/16”
SMALL HOUSING
LARGE HOUSING
Z5Z6
1-3/16”
1/2”
1/8” BOLT THICKNESS
5/8”1-1/8”
1-7/16”
3/4” 1”
1-9/16”
7/16”
All dimensions shown are in the locked position.
Spe
cial
Fin
ish
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
KenstanL O C K C O M P A N Y RatchetLock RL
KeymaticLine K13
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
1” MINIMUM 3-1/8” MAXIMUM
3/4” MAX. GLASS THICKNESS
1-1/16”
1-1/2”
4-1/4”
CBA D E F
RL K 60 B1 PN N
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
ADJUSTABLE BAR B2
Lock StyleRL Ratchet Lock
Core TypeK Keymatic
Housing Style60 Ratchet
Bar Type PriceB1 Standard $23.54B2 Adjustable 28.28B5 Stick on 28.28B6 Screw on 28.28
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 0.95CF Custom Finish Call
Key RetainingN No Std.
Note: Keys are not included with this lock. See page K14 to order keys.
A
B
C
D
E
F
4-1/2”
1-1/4” TYP.
1-3/4” TYP.
11/16”
1/2” TYP.
1/4” MAX. GLASS THICKNESS
1-3/8” TYP.
1” MINIMUM 3-3/8” MAXIMUM
1” 1-1/8”
5/8” TYP.
STANDARD BAR B1
ADJUSTABLE BAR B5
ADJUSTABLE BAR B6
2-1/2”
1/2”
1/4”
5/8” 1-1/2”
2-7/16”
9/16”
1/2”
1-1/2”
7/8”
D
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
K14
KEY KeyKenstanL O C K C O M P A N Y
KeymaticLine
KeymaticTubularKeys
Keymatic locks utilize industry standard K137 tubular keys com-bined with non-industrystandardsizecuts. Standard tubular keys are cut on a machine using a .156 diameter size cutting blade; Kenstan uses a CNC milling machine and .093 size cutter to meet our tight tolerances and avoid cutting the key tip and degrading the key. A typical lock shop may be capable of pro-ducing a workable duplicate key, but the Kenstan warranty will be void if our Factory Original keys are not used with our locks. Use of unauthorized duplicates will inevitably cause the lock to become misaligned and possibly suffer irreversible damage.
Kenstan Original Keymatic operating keys and Change Tools can be ordered by referencing the stamp number on the keys. The first two letters represent a manufacturing date code and the next 3 or 4 numbers represent the Keymatic key code. The final dash and number from 1 to 8 represent the setting within the key code for operating keys only. All operating keys starting in late 2003 come standard with a colored key cover representing dash numbers 1 thru 8. The Change Tool does not have the final dash and number; the large red stop sign shaped cover notes the special purpose of changing the Keymatic lock setting only.
If keys have been lost or stolen, you can reference the Keymatic code number stamped on the lock housings, cams or bolts.
OPERATING KEY #02(Blue)#01(Orange)
OPERATING KEY #04(Green)OPERATING KEY #03(Yellow)
OPERATING KEY #06(Pink)OPERATING KEY #05(White)
OPERATING KEY #08(Tan)OPERATING KEY #07(Purple)
RED CHANGE TOOL TOOL
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
CBA D
KEY K 01 XXXX
ItemKEY Key
Core TypeK Keymatic
Operating Key/Change Tool Price01 Orange $3.6502 Blue 3.6503 Yellow 3.6504 Green 3.6505 White 3.6506 Pink 3.6507 Purple 3.6508 Tan 3.65TOOL Red Change Tool 5.85
Key CodeXXXX Specific
Up to 4 digits A Any
Kenstan assigns
A
B
C
D
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com
Terms and Conditions of SaleVolume 5 KenstanL O C K C O M P A N Y
1. Pricing: Kenstan Lock reserves the right to institute price adjustments based upon fluctuation of material costs without prior notice. Orders, or balances of orders, that have not shipped within 6 months from the original order date may be subject to a price review.
2. Payment Terms: Payment must be made at time of purchase, unless otherwise approved by Kenstan with terms of Net 30 Days from the date of the invoice. A service charge of 1.5% per month will be charged on overdue accounts.
3. Shipping: Please be sure to specify your preferred shipping method on every order. For all orders received without shipping instructions, Kenstan will use our discretion to make carrier selection based upon the most economical method of shipment available to meet your required in house date. Kenstan is not responsible for risk of loss or damage to products in transit with the selected carrier.
4. Deliveries: At Kenstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within two weeks from the receipt of your order. Rush orders and emergency services are available. Unless specifically prohibited in writing by the purchaser, Kenstan reserves the right to make partial shipments of any order.
5. Inspection: Kenstan Lock inspects all products in accordance with our standard quality control procedures. Upon receipt and inspection by the purchaser, any parts proven to be defective or not as ordered may be returned to Kenstan for repair or replacement following the conditions in the “Returned Goods” section (#6) below.
6. Returned Goods: Product replacement or account credit for any returned goods will be made solely at the discretion of Kenstan and will only be accepted upon the issuance of a Return Authorization number from Kenstan’s Customer Service Department. Merchandise proven to be defective, due to faulty material and/or workmanship, may be returned for full replacement or credit. Any product ordered incorrectly by the customer may be accepted for return and subject to a 50% handling charge. Locks made with special or out-of production parts are not returnable, unless prior arrangements have been made. Returned merchandise that is damaged in transit, due to inadequate return packaging, will not be accepted.
7. Warranty: Kenstan Lock warrants, for a period of one year from delivery, that our products are free from defects in material and workmanship and makes no other warranties, expressed or implied, including but not limited to the degree of security or the purchaser’s application or use of our product. Kenstan Lock Co. will not warranty any locks or parts that were modified outside of our factory. In the event of a product defect, Kenstan shall only be responsible to the extent of the cost of our product, and will not accept any claims for labor or loss of merchandise.
8. Cancellation: If all or any part of an order is cancelled before the completion of the product assembly by Kenstan, the purchaser shall be responsible for payment of all assembled items as well as any special parts ordered for items remaining unassembled at the time of cancellation. If pricing on the original order was based upon Kenstan’s quantity discount, a partial cancellation may affect the pricing on items already shipped and invoiced and a price adjustment will be made.
9. Catalog Dimensions and Sample Policy: Please be aware that all lock and part drawing dimensions carry a tolerance of plus or minus 1/16’’ and are for reference only. Please contact us for actual dimensions. All specifications are subject to change without notice. Samples products are available upon request.
Since 1963, Kenstan Lock Company has manufactured several lines of high-quality showcase and cabinet locks, each with their own unique security features. Each year, we continue to enhance our existing prod-uct lines, while adding new products to meet the ever-changing needs of our commercial, industrial and retail clients. We also offer a wide range of door hardware locks, such as mortise and rim cylinders, as well as le-ver and tubular handles for fitting rooms, stock rooms, offices, etc.
Our product lines are complimented by Kenstan as-sociates who are available to assist you with security layouts, keying plans and custom products as needed.
Each of our lines, and all of our products, are manu-factured using the highest standards of quality and we stand behind each and every product we deliver. From the quality products assembled in our factory to our shipping and customer service departments, our goal is to provide the best service possible, from start to finish.
At Kenstan, we take pride in our reputation that has been built on quality products, reliability and the excep-tional customer service that our clients depend on.
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E [email protected] W www.kenstan.com