Vises and Accessories - KARkar.ca/pdf/KAR_Catalog_2012_4_4.pdf · Vises and Accessories 807 ......
Transcript of Vises and Accessories - KARkar.ca/pdf/KAR_Catalog_2012_4_4.pdf · Vises and Accessories 807 ......
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca [email protected]
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Toolmaker’s Vises
Toolmaker’s Vises
Vises and Accessories
807
• Squareness and parallelism guaranteed within 0.0002” on sides and bottom• Made of hardened steel and precision ground• Horizontal and vertical v-grooves in movable jaw• The “no rise” jaw construction exerts continual downward pressure on the jaw, preventing the jaw from rising which is a common problem on
most vises
Jaw Width(Inch)
Jaw Opening(Inch)
Jaw Depth(Inch)
Overall Length(Inch)
Overall Height(Inch) Code
2 3-1/8 1 5-1/2 2 3214823 3-3/4 1-3/8 7 2-1/2 3214833 4 1-3/8 7-1/4 2-1/2 321486
Jaw Width(Inch)
Jaw Opening(Inch)
Jaw Depth(Inch)
Vise Length(Inch) Code
2 2-1/2 1 6 3214882-1/2 3-1/2 1-1/4 7-1/2 321489
3 3-1/2 1-1/4 8-1/2 321490
05_SectionC_pgs653-892+4_jun1512.indd 809 6/18/2012 10:52:21 AM
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Precision Rapid Vises
Standard Fixed Angle Precision VisesExtended Opening
Vises and Accessories
808
• Material: FCD 60 ductile iron; Hardness: 50 HRC• Standard clamping lead screw• Super-opening design allows jaws to open 340mm for HEAV-160 and 425mm for HEAV-200• With jaws mounted externally maximum workholding capacity is 480mm for HEAV-160 and 580mm for HEAV-20
Model A(mm)
B(mm)
C(mm)
D(mm)
F(mm)
G(mm)
I(mm)
J(mm)
K(mm)
L(mm)
M(mm)
M1(mm)
Weight(kg) Code
HEAV-160 19 15 18 192 85 ±0.01 140 141±0.01 683 628 240 0-340 140-480 50 277014HEAV-200 19 18 18 240 100 ±0.01 160 190±0.01 775 720 280 0-425 155-580 95 277016
• Designed with an instant clamping hex nut for quick adjustment when clamping workpieces of different lengths• Moveable jaw is short in length for maximum opening capacity• Tapered jaws provide more stable clamping force• 100% steel construction provides better strength and accuracy retention• Compact design allows maximum workholding capacity on machine
STANDARD ACCESSORIES: 2 alignment wedges, 4 clamps
Model A(mm)
B(mm)
D(mm)
E(mm)
E1(mm)
e(mm)
C(mm)
H(mm)
Clamping Force(Tons)
Weight(kg) Code
HG-100 100 100 73 ±0.02 68 14 37 ±0.01 250 12 2 8 277030HG-150A 150 150 88 ±0.02 95 18 48 ±0.01 350 23 4 23 277032HG-150B 150 200 88 ±0.02 95 18 48 ±0.01 400 23 4 25 277034HG-150D 150 300 88 ±0.02 95 18 48 ±0.01 500 23 4 29 277036HG-200A 205 200 85 ±0.02 126 18 63 ±0.01 470 26 5 55 277038HG-200C 205 300 85 ±0.02 126 18 63 ±0.01 570 26 5 73 277040
05_SectionC_pgs653-892+4_jun1512.indd 810 6/18/2012 10:52:22 AM
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca [email protected]
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Multi-Power CNC Precision Fixed Angle Vise
Multi-Power CNC Super VisesVises and Accessories
809
• Material: FCD 60 ductile iron; Hardness: 50 HRC• Short length with large jaw opening• Extremely high accuracy and repeatability• Special Multi-Power design enhances clamping force up to 8000 kg
STANDARD ACCESSORIES: 2 alignment wedges, 4 clamps
Model A(mm)
B(mm)
C(mm)
C1(mm)
D(mm)
E(mm)
F(mm)
G(mm)
H(mm)
I(mm)
J(mm)
J1(mm)
K(mm)
K1(mm)
L(mm)
M(mm)
Weight(kg) Code
HPAQ-160 168 115 ±0.01 0-300 195-
490 57 ±0.02 18 560 677 160 19 15 21 53 63 117 145 73 277000
HPAQ-200 187 120 ±0.01 0-350 220-
570 66 ±0.02 18 637 754 200 19 18 25 66 75 117 168 120 277002
• Material: FCD 60 ductile iron; Hardness: 50 HRC• Mounts horizontally or vertically• Short length with large jaw opening• Extremely high accuracy and repeatability• Special Multi-Power design enhances clamping force up to 8000 kg
STANDARD ACCESSORIES: 2 alignment wedges, 4 clamps
Model A(mm)
B(mm)
C(mm)
C1(mm)
D(mm)
E(mm)
F(mm)
G(mm)
H(mm)
I(mm)
J(mm)
K(mm)
L(mm)
M(mm)
Weight(kg) Code
HPAC-160S 160 105 ±0.01 0-250 190-430 80 ±0.02 18 532 580 160 19 15 183 58 196 64 277005
05_SectionC_pgs653-892+4_jun1512.indd 811 6/18/2012 10:52:22 AM
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Double CNC Precision Vises
Multi-Power CNC Precision Fixed Angle VisesVises and Accessories
810
• Material: FCD 60 ductile iron; Hardness: 50 HRC• Mounts horizontally or vertically• Short length with large jaw opening• Extremely high accuracy and repeatability• Special Multi-Power design enhances clamping force up to 8000 kg
STANDARD ACCESSORIES: 2 alignment wedges, 4 clamps
Model A(mm)
B(mm)
C(mm)
C1(mm)
C2(mm)
C3(mm)
D(mm)
E(mm)
F(mm)
G(mm)
H(mm)
I(mm)
J(mm)
K(mm)
L(mm)
M(mm)
Weight(kg) Code
HPAC-130 147 95 ±0.01 0-190 70-260 115-
305185-375 80 ±0.02 18 475 583 131 19 15 55 120 150 47 302785
HPAC-160 160 105
±0.01 0-250 85-325 140-375
220-460 80 ±0.02 18 560 670 161 19 15 58 120 165 65 302786
HPAC-200 170 110
±0.01 0-290 90-380 155-440
240-530
100 ±0.02 18 635 743 201 19 18 63 120 197 95 302788
• Material: FCD 55 ductile iron; Hardness: 50 HRC• Increases the workholding capacity of CNC machining centers by holding two pieces of different sizes (max. opening difference 70mm)• Compact design allows several vises to be fitted to the machine table• Center jaw may be removed to hold larger workpieces• When center jaw is removed the vise is self-centering• Special spring device allows an extra range of up to 5mm in workpiece size, enabling quick positioning and clamping
STANDARD ACCESSORIES: 2 alignment wedges, 4 clamps
Model A(mm)
B(mm)
C(mm)
D(mm)
E(mm)
F(mm)
G(mm)
H(mm)
I(mm)
J(mm)
Weight(kg) Code
HDL-4 92 63 ±0.01 74 200 18 395 480 104 14 14 20 277008HDL-6 118 80 ±0.01 100 270 18 517 615 154 19 18 46 277010
05_SectionC_pgs653-892+4_jun1512.indd 812 6/18/2012 10:52:23 AM
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca [email protected]
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Super Open Quick Action ViseVises and Accessories
811
• Material: FCD 60 ductile iron; Hardness: 50 HRC• Patented Multi-Power System provides extremely high clamping force of 0-4500 kg• Consistent clamping pressure• Eliminates all leakage and maintenance problems associated with hydraulic vises• More compact than hydraulic vises• Body has one-piece construction for high rigidity and precision• Angle lock mechanism provides downward pressure on jaw to ensure parallel clamping force• Both surfaces of slideways are heat treated for durability• Large opening capacity up to 300mm
Model A(mm)
B(mm)
C(mm)
D(mm)
E(mm)
F(mm)
G(mm)
H(mm)
I(mm)
J(mm)
K(mm)
L(mm)
M(mm)
N(mm)
Weight(kg) Code
HSAC-160 200 15 300 77 610 139 158 82 63 200 240 190 915 18 58 277011
05_SectionC_pgs653-892+4_jun1512.indd 813 6/18/2012 10:52:23 AM
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Precision Angle Lock Machine VisesVises and Accessories
812
• Material: FCD 55 ductile iron; Hardness: 45 HRC• Two set screws in the fixed jaw ensure that jaws do not tilt backwards when high clamping force is applied• Iron leadscrew cover protects vise internals from contamination• Both sides of slideways are heat treated for durability• Angle lock mechanism creates downward pressure on jaw ensuring both jaws are parallel during clamping• Needle bearing thrust collar cuts friction and increases clamping pressure by 80%
ModelA
(mm/Inch)
B(mm/Inch)
C(mm/Inch)
D(mm/Inch)
E(mm/Inch)
F(mm/Inch)
G(mm/Inch)
H(mm/Inch)
I(mm/Inch)
J(mm/Inch)
K(mm/Inch)
Weight(kg) Code
HAV-4” 87/3.43 30/1.18 107/4.09 242/9.53 318/12.52 230/9.06 172/6.77 14/0.55 15/0.59 16/0.63 58/2.28 20 277020HAV-5” 98/3.86 32/1.26 110/4.33 280/11.02 355/13.98 256/10.00 210/8.27 15/0.59 15/0.59 16/0.63 66/2.60 29 277022HAV-8” 136/5.35 55/2.17 198/7.80 422/16.61 555/21.85 380/14.96 305/12.00 19/0.75 24/0.94 18/0.71 84/3.31 80 277024
HAV-12” 219/8.62 - 320/12.60 - 738/29.06 - 408/16.06 19/0.75 24/0.94 - 102/4.02 125 2770266” SUPER OPEN 8” 114/4.49 42/1.65 198/7.80 336/13.23 433/17.05 300/11.81 238/9.37 19/0.75 18/0.71 18/0.71 75/2.95 50 277027
05_SectionC_pgs653-892+4_jun1512.indd 814 6/18/2012 10:52:24 AM
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca [email protected]
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Lock II Machine Vise
Hydraulic Machine VisesVises and Accessories
813
• Constructed with a hydraulic cylinder which absorbs cutting vibration and the precision of machining while maintaining a high clamping force• Vise body is made of high tensile cast iron and slideways are hardened and ground to ensure rigidity, durability and minimal deformation• Jaws are made of special hardened alloy steel and are precision ground
Model A(mm)
B(mm)
C(mm)
D(mm)
E(mm)
F(mm)
G(mm)
H(mm)
I(mm)
J(mm)
K(mm)
L(mm)
ClampingForce(kg)
BodyWeight
(kg)
BaseWeight
(kg)Code
HH-100 100 36 170 525 430 130 160 94 60 78 100 155 2,500 16 6 277050HH-125 125 46 220 670 540 165 185 118 72 97 117 185 3,500 33 7 277052HH-150 150 51 300 800 620 200 240 133 82 116 125 207 4,500 54 16 277054HH-200 200 62 300 900 700 225 280 160 100 160 150 265 8,500 90 20 277056
• Ideal design for CNC machining applications• No coolant through design enables “ganging” a series of these vises side-by-side on the machine table• Minimum center-to-center machining distance when vises are ganged together• Reduces set up time and provides cost savings• Both sides are precision ground parallel to each other and perpendicular to the base• Vise can also be used in a vertical position due to it’s ground surfaces• Perpendicularity to bottom: 0.01mm• Parallelism of sides: 0.02mm• Fixed jaw located and held in position by keyway
Model A(mm)
B(mm)
C(mm)
a(mm)
b(mm)
c1(mm)
d(mm)
e(mm)
f(mm)
Weight(kg) Code
HMC-6” 156 44 146 370 18 119 75 19 438 32 277059
05_SectionC_pgs653-892+4_jun1512.indd 815 6/18/2012 10:52:24 AM
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Modular System Vises
Standard Series Vises
Vises and Accessories
814
• Modular design for easy interchangeability• Hardened and ground steel• Manufactured under rigid quality control• Fixed vise with guided movable jaw• High alloyed quality resistance steel, case hardened (HRC 60 ±2)• Unlimited clamping range• Supplied with one workstop, one pair of positioning key nuts, two pair of clamps, one box wrench and one “T” wrench
Type
WJaw
Width(Inch)
AJaw
Opening(Inch)
BJaw
Height(Inch)
DBase
Length(Inch)
ApproximateWeight(kg/lbs)
Code
1 4 3.9 1.1 10.6 7/15 2780002 5 5.9 1.5 13.5 13/28 2780023 6 7.8 1.9 16.5 26/56 2780043 6 11.1 1.9 20.7 29/64 2780064 7 7.8 2.3 17.9 37/81 2780084 7 1.8 2.3 21.8 42/92 2780104 7 5.7 2.3 25.7 47/103 2780124 7 19.6 2.3 29.7 52/114 2780145 8 7.9 2.5 19.4 64/141 2780165 8 11.8 2.5 23.4 69/152 2780185 8 15.7 2.5 27.3 74/163 2700205 8 19.6 2.5 31.2 79/174 2780225 8 23.6 2.5 35.2 84/185 2780246 12 11.8 3.1 25.0 105/231 2780266 12 15.7 3.1 28.9 115/253 2780686 12 19.6 3.1 32.8 125/275 2780306 12 23.6 3.1 36.8 135/297 278032
05_SectionC_pgs653-892+4_jun1512.indd 816 6/18/2012 10:52:24 AM
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca [email protected]
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Multitasking Series Vise - Type 2
Modular System Vises
Multiflex Series Vise - Type 2
Vises and Accessories
815
A new concept in modular clamping systems able to maximize the machine table capacity and increase it’s productivity. The comb system is used between the fixed and movable jaws, increasing and improving the clamping capacity.
• Modular design for easy interchangeability• Hardened and ground steel• Manufactured under rigid quality control• Smooth jaws• For multiple clamping of up to 12 work pieces of various sizes• Supplied with one fixed jaw, four fixed-movable jaws, one “T” wrench, one pair of positioning key nuts and four workstops
A(Inch)
B-0
-0.2(Inch)
C-0
-0.2(Inch)
D(Inch)
E(Inch)
F(Inch)
G(Inch)
H(Inch)
I(Inch)
L(Inch)
M(Inch)
N(Inch)
ApproximateWeight(kg/lbs)
Code
19.7 3 3 3.9 1.6 2 2.8/3 2 0.6 0.8 0.6 2.9 26/57 278100
• Modular design for easy interchangeability• Hardened and ground steel• Manufactured under rigid quality control• Manual operation, mechanical clamping• Jaw adjustment in steps of 2mm (multiaxis self-centering)• Precision hardened (HRC 60) and ground steel construction• Gripping accuracy within 0.015mm• Solid, rigid construction for minimum deflection• Supplied with #2 jaws with step 5x5mm and one hexagon wrench
A(Inch)
B(Inch)
C(Inch)
D(Inch)
E(Inch)
F(Inch)
G(Inch)
H(Inch)
ApproximateWeight(kg/lbs)
Code
4.1 3.9 6.3 4.5 2.8 0.8 1 1.6 11/24.3 278102
05_SectionC_pgs653-892+4_jun1512.indd 817 6/18/2012 10:52:25 AM
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Base Only
KR Precision Vise and BaseVise
Machine ViseVises and Accessories
816
• 6”/152mm jaw width, 7-1/2”/190mm jaw opening• Bed height of each vise is made to size (2.875”/73.025mm) within ±0.0005” (±0.0127mm) at no extra cost• Attractive black and silver vein powder coating is much more durable than ordinary paint, and won’t wear off at the first touch of coolant• Handle is machined steel, not a rough casting• Needle bearing facilitates greater clamping• Stress-relieved 80,000 PSI ductile iron vise body is supplied from a Caterpillar-certified foundry guaranteeing you the very best in tensile
strength and rigidity• Vise bed is flame-hardened• All machined surfaces are square and parallel within 0.001”/0.025mm• Supplied with a removable jaw design• Semi-hard nickel plated steel screw
Jaw Width(Inch/mm)
Jaw Opening(Inch/mm)
Bed Height(Inch)
Approximate Weight(lbs) Code
6/152 7-1/2/190 ±0.0005 90 301006
• Stationary front jaw• Back jaw moves along with the slide reducing the tendency of deflection and prevents the work piece from lifting• Cast body, steel jaws• Hardened throughout and ground on all sliding and contacting surfaces• Ideal for CNC applications
Jaw Width(Inch)
Jaw Opening(Inch)
Jaw Depth(Inch) Code
6 8 1-7/8 301436
Code301437
05_SectionC_pgs653-892+4_jun1512.indd 818 6/18/2012 10:52:25 AM
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca [email protected]
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Multi-Fixture Vise
Vises and Accessories
817
Drill Press Vise
JawWidth(Inch)
JawOpening
(Inch)
JawDepth(Inch)
Weight(lbs) Code
2-1/2 2-1/4 1-1/4 12 302276
JawWidth(Inch)
JawOpening
(Inch)
JawDepth(Inch)
Weight(lbs) Code
3-1/2 3 1-5/16 18 302277
• Fast set-up for fixture work or one off parts• Locking jaws for precise repeatability• Holds odd shapes securely
JawWidth(Inch)
JawOpening
(Inch)
Weight(lbs)
OverallLengthClosed(Inch)
Length(Inch)
Width(Inch)
Height(Inch) Code
5-1/2 6 75 25-1/8 18-3/4 9-1/16 5 302286
05_SectionC_pgs653-892+4_jun1512.indd 819 6/18/2012 10:52:26 AM
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Quick Action Vises
Angle Lock ViseLarge Opening
Vises and Accessories
818
• This rugged and proven design makes it the most popular vise in the metalworking industry
Jaw Width(Inch)
Jaw Opening(Inch) Code
6 7-1/2 302790
Jaw Width(Inch)
Jaw Opening(Inch)
Weight(lbs) Code
3 2-3/4 10 3124364 4-1/4 18 3124376 6 29 3124388 8 44 312439
Quick Action Vise AccessoriesPrismatic Jaws
Jaw Width(Inch) Code
6 358350
Jaw Width(Inch) Code
6 358353
05_SectionC_pgs653-892+4_jun1512.indd 820 6/18/2012 10:52:26 AM
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca [email protected]
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Miniature Bench ViseSwivel Base
Drill Press Vises
Vises and Accessories
819
U-Type Angle Vise
Jaw Width(Inch) Code
3 318481
Jaw Width(Inch) Code
4 318482
Size(Inch)
Jaw Width(Inch)
Jaw Opening(Inch)
Jaw Depth(Inch)
Weight(kg/lbs) Code
3 3-1/8 2-3/4 1-1/16 3/6.61 3274904 4-1/8 3-3/4 1-3/16 4/8.82 3274915 5 4-5/8 1-3/8 6/13.23 3274926 6 5-5/8 1-3/8 8/17.64 327493
Jaw Width(Inch)
Jaw Opening(Inch) Code
2 1-1/4 340151
05_SectionC_pgs653-892+4_jun1512.indd 821 6/18/2012 10:52:27 AM
ENJOY QUALITY, VALUE AND BENEFITS - CALL KAR TODAY!
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
High Precision Drill Press Vise
Bench VisesFixed Base
Vises and Accessories
820
• Body made from graded cast iron• Hardened and ground alloy steel jaws• Perfectly aligned vise for smooth functioning
Jaw Width(Inch)
Jaw Opening(Inch)
Weight(lbs) Code
3 3-3/8 11 4162504 4 19 4162515 5 28 4162526 6 43 416253
• Body made from special cast iron• Hardened and ground jaws• Hardness of jaws: 55 to 60 HRC• Grooves in the jaws for holding round work pieces both horizontally and vertically
Jaw Width(Inch)
Jaw Opening(Inch)
Weight(lbs) Code
4 4-5/16 17 416260
05_SectionC_pgs653-892+4_jun1512.indd 822 6/18/2012 10:52:27 AM
Toronto: 1-800-387-3127 Montréal: 1-800-363-7862 Edmonton: 1-866-440-4326 www.kar.ca [email protected]
TUR
NIN
G, M
ILLI
NG
& W
OR
K H
OLD
ING
Manual Milling Machine VisesSwivel Base
Precision Drill Press Vises
Vises and Accessories
821
• Close grained cast iron construction• Ground vise bed• Hardened v-grooved tool steel jaws• Knurled nut type grip makes it convenient to close and open the vise on the drill table
Jaw Width(Inch)
Jaw Opening(Inch)
Weight(lbs) Code
3 3 6 4162634 4 12 4162645 5 23 416265
• Close grained cast iron construction• Hardened and ground jaw plates• Hardness of jaws: 50 to 60 HRC• Totally enclosed screw• A big heavy gun metal nut for longer life and greater gripping power• Two indexes 180 degrees apart
Jaw Width(Inch)
Jaw Opening(Inch)
Jaw Height(Inch)
Weight(lbs) Code
8 8 2-1/2 150 4164884 4 1-13/16 37 4164846 6-3/4 2-7/16 78 416486
05_SectionC_pgs653-892+4_jun1512.indd 823 6/18/2012 10:52:28 AM