MACHINERY & ACCESSORIES A CHUCK JAWS LATHE … · chuck jaws lathe workholding machine vises vise...
2
CHUCK JAWS LATHE WORKHOLDING MACHINE VISES VISE JAWS RETENTION KNOBS ER, DA, TG COLLETS TOOLHOLDERS TAP HOLDERS INDEXABLE DRILLS TURNING & BORING ENDMILLS, DRILLS TAPS & REAMERS ABRASIVES MEASURING TOOLS MRO & SAFETY FLAT STOCK/DRILL ROD 428 2019-20 MASTER CATALOG Call Us Today For All Of Your Machine Tool Needs! RADIAL ARM DRILL PRESSES MACHINERY & ACCESSORIES MATERIAL SUPPORT STANDS Weight Cap. Height Range Base Size Length of Horz. Holder Min Stock Dia Max Stock Dia Type Part Number Price Each 2000 lbs 23” to 38-1/2” 15” x 16-1/2” 14” - - Horizontal Head PALM-70141 $167.00 5” 1” 18” V-Roller Head PALM-70181 $172.00 The Palmgren material support stands are made of heavy duty cast iron and steel for handling heavy loads of stock-up to 2,000 lbs. A clamping mechanism on the column allows for quick and easy height adjustments. Locking screws provide added safety. Stand can be ordered with either a Horizontal Head or a V-Roller Head. Replacement heads are available. The Horizontal Head is a chrome-plated, 2" x 14" ball bearing roller head designed to smoothly move up to 2,000 lbs. of flat stock. The V-Roller Head consists of two chrome-plated 2" x 5" ball bearing roller heads designed to smoothly move up to 2,000 lbs. round stock 1" to 18" diameter. PALM-70141 PALM-70181 A Mount Type Load Per Mount (lbs) Base Dia Bolt Size Level Adjust. Bolt Length Overall Height Part Number Price #1 100-1,100 3.16 M12 X 1.25 .88 4.72 5.25 ROY-27001 $39.20 #2 880-2,200 4.75 M16 X 1.5 .88 4.72 5.25 ROY-27002 $74.48 #3 1,760-5,500 6.31 M20 X 1.5 1.00 6.88 7.50 ROY-27003 $106.82 #4 3,300-8,800 6.31 M20 X 1.5 1.00 6.88 7.50 ROY-27004 $127.40 #5 6,600-12,000 7.88 M20 X 1.5 1.00 6.88 7.88 ROY-27005 $206.78 Extra-Long Leveling Bolts (For machines with thick bases) For Mount Type Bolt Size Bolt Length Part Number Price #1 M12 X 1.25 8-1/4” ROY-27007 $16.66 #2 M16 X 1.5 8-1/4” ROY-27008 $20.58 #3-#5 M20 X 1.5 9-3/4” ROY-27009 $30.38 MACHINE MOUNTS • Simplify machine installation, reduce noise and isolate vibration • Prevents machines from “walking” without the need for bolting or cementing • Ideal for injection molding machines, presses, lathes, mills and grinders • Protects sensitive machine components, improves performance and reduces maintenance costs • Meets OSHA requirements Easy Installation! 1- Raise machine and slide mount into place 2- Insert leveling bolt through machine base hole and thread into mount. Lower machine onto leveling plate. 3- Raise or lower machine by turning leveling bolt 4- When machine is level, secure in place Palmgren’s radial arm drill presses have an extended reach, tilting drill head that is ideal for large or odd-shaped work pieces. The table tilts 45° left or right allowing easy machining of holes at almost any angle. • Durable cast iron head, table & base • Spindle supported by high quality ball bearings • • Rack and pinion table raiser • Table tilts 45° right & left and swivels 360° around the column • 1/2" through table & base slots for easy mounting and clamping of workpiece • Front mounted safety, paddle on/off switch • Drill chuck & key • 3 Year Warranty Part Number PALM-80341 $475.00 PALM-80342 $550.00 Swing 9 to 33” 9 to 33” Motor HP 1/2 HP 1/2 HP Voltage 115 115 Amps 4.8 A 4.8 A Capacity Cast Iron 5/8” 5/8” Spindle Speeds 5 5 RPM 575-3520 575-3520 Spindle Taper MT2 MT2 Spindle Travel 3- 5/32” 3- 5/32” Spindle to Table 15” 30” Table Work Surface 8-7/8 x 9” 10-3/8 x 10-3/8” Table Slots 1/2” 1/2” Height 37” 65” Width 10” 14” Depth 33” 33” Head Tilts 90° Left & 45° Right! Head Moves 12-1/2” Forward or Backward! PALM-80341 PALM-80342 Full Line Available! Please call for more information Full Line Available! Please call for more information QUILL STOP FEATURES: • Fast on-off clip action • Rapid depth setting on quill • Rigid clamping • Increase productivity and reduce cost • For Bridgeport™ type mills with 1/2”-20 stop rod Part Number A-3900-0200 $7.49 each C QUILL FEED HANDLES FEATURES: • Time saving accessory for Bridgeport™ type mills • Move handle into any position desired with a simple twist of the wrist • Spring pushes pin back from quill feed actuation up or down Part # A-3900-0201 $19.99 each C
Transcript of MACHINERY & ACCESSORIES A CHUCK JAWS LATHE … · chuck jaws lathe workholding machine vises vise...
CH
UC
K J
AWS
LATH
E W
OR
KH
OLD
ING
MA
CH
INE
VISE
SVI
SE J
AWS
RET
ENTI
ON
KN
OB
SER
, DA
, TG
CO
LLET
STO
OLH
OLD
ERS
TAP
HO
LDER
SIN
DEX
AB
LE D
RIL
LSTU
RN
ING
& B
OR
ING
END
MIL
LS, D
RIL
LSTA
PS &
REA
MER
SA
BR
ASI
VES
MEA
SUR
ING
TO
OLS
MR
O &
SA
FETY
FLAT
STO
CK
/DR
ILL
RO
D
428 2019-20 MASTER CATALOG Call Us Today For All Of Your Machine Tool Needs!
RADIAL ARM DRILL PRESSESMACHINERY & ACCESSORIES
MATERIAL SUPPORT STANDS
WeightCap.
Height Range
BaseSize
Length of Horz. Holder
Min StockDia
Max StockDia Type Part
NumberPriceEach
2000 lbs 23” to 38-1/2”
15” x 16-1/2”
14” - - Horizontal Head PALM-70141 $167.00
5” 1” 18” V-Roller Head PALM-70181 $172.00
The Palmgren material support stands are made of heavy duty cast iron and steel for handling heavy loads of stock-up to 2,000 lbs. A clamping mechanism on the column allows for quick and easy height adjustments. Locking screws provide added safety. Stand can be ordered with either a Horizontal Head or a V-Roller Head. Replacement heads are available.
The Horizontal Head is a chrome-plated, 2" x 14" ball bearing roller head designed to smoothly move up to 2,000 lbs. of flat stock. The V-Roller Head consists of two chrome-plated 2" x 5" ball bearing roller heads designed to smoothly move up to 2,000 lbs. round stock 1" to 18" diameter.
PALM-70141 PALM-70181
A
Mount Type
Load Per Mount (lbs)
Base Dia
Bolt Size
Level Adjust.
Bolt Length
Overall Height
Part Number Price
#1 100-1,100 3.16 M12 X 1.25 .88 4.72 5.25 ROY-27001 $39.20#2 880-2,200 4.75 M16 X 1.5 .88 4.72 5.25 ROY-27002 $74.48#3 1,760-5,500 6.31 M20 X 1.5 1.00 6.88 7.50 ROY-27003 $106.82#4 3,300-8,800 6.31 M20 X 1.5 1.00 6.88 7.50 ROY-27004 $127.40 #5 6,600-12,000 7.88 M20 X 1.5 1.00 6.88 7.88 ROY-27005 $206.78
Extra-Long Leveling Bolts (For machines with thick bases)For Mount
TypeBolt Size
Bolt Length
Part Number Price
#1 M12 X 1.25 8-1/4” ROY-27007 $16.66#2 M16 X 1.5 8-1/4” ROY-27008 $20.58
#3-#5 M20 X 1.5 9-3/4” ROY-27009 $30.38
MACHINE MOUNTS• Simplify machine installation, reduce noise and isolate vibration• Prevents machines from “walking” without the need for bolting or cementing• Ideal for injection molding machines, presses, lathes, mills and grinders• Protects sensitive machine components, improves performance and reduces maintenance costs• Meets OSHA requirements
Easy Installation!1- Raise machine and slide mount into place2- Insert leveling bolt through machine base hole and thread into mount. Lower machine onto leveling plate.3- Raise or lower machine by turning leveling bolt4- When machine is level, secure in place
Palmgren’s radial arm drill presses have an extended reach, tilting drill head that isideal for large or odd-shaped work pieces. The table tilts 45° left or right allowingeasy machining of holes at almost any angle.
• Durable cast iron head, table & base• Spindle supported by high quality ball bearings• • Rack and pinion table raiser• Table tilts 45° right & left and swivels 360° around the column• 1/2" through table & base slots for easy mounting and clamping of workpiece• Front mounted safety, paddle on/off switch• Drill chuck & key• 3 Year Warranty
Part Number PALM-80341$475.00
PALM-80342$550.00
Swing 9 to 33” 9 to 33”
Motor HP 1/2 HP 1/2 HPVoltage 115 115Amps 4.8 A 4.8 A
Capacity Cast Iron 5/8” 5/8”Spindle Speeds 5 5
RPM 575-3520 575-3520
Spindle Taper MT2 MT2Spindle Travel 3- 5/32” 3- 5/32”
Spindle to Table 15” 30”
Table Work Surface 8-7/8 x 9” 10-3/8 x 10-3/8”Table Slots 1/2” 1/2”
Height 37” 65”
Width 10” 14”Depth 33” 33”
Head Tilts 90° Left & 45° Right!
Head Moves 12-1/2” Forward or Backward!
PALM-80341 PALM-80342
Full Line Available!Please call for more information
Full Line Available!Please call for more information
QUILL STOPFEATURES:• Fast on-off clip action• Rapid depth setting on quill• Rigid clamping• Increase productivity and reduce cost• For Bridgeport™ type mills with 1/2”-20 stop rod
Part Number A-3900-0200
$7.49 each
C
QUILL FEED HANDLES
FEATURES:• Time saving accessory for Bridgeport™ type mills• Move handle into any position desired with a simple twist of the wrist• Spring pushes pin back from quill feed actuation up or down
Part # A-3900-0201
$19.99 each
C
LATHE C
HU
CK
SLIVE C
ENTER
SVISE JAW
SVISE A
CC
ESSOR
IESSTR
AIG
HT SH
AN
KC
OLLET H
OLD
ERS
TAP H
OLD
ERS
DR
ILL CH
UC
KS
CA
RB
IDE IN
SERTS
THR
EAD
ING
/GR
OO
VING
CU
TTING
TOO
LSM
AC
HIN
ERYPR
ECISIO
N TO
OLS
DEB
UR
RIN
GC
OO
LAN
T/FLUID
STO
OL STO
RA
GE
2019-20 MASTER CATALOG 429Call Us Or Visit Our Website For Our Complete Selection!
HI-TORQUE POWERFEEDS
Description Part Number PriceX-Axis PP-PF-X $525.00Y-Axis PP-PF-Y $525.00Z-Axis PP-PF-Z $595.00
• Maximum Torque- 650 in/lb for heavy duty applications• Strengthened “Zytel” Gear• Helical gearing, internal clutch• Automatic shut-off at end of cut• Variable speed control• Pilot light, on/off switch
AIR POWER DRAWBARS
Taper PartNumber
PriceEach
R8 PP-APD-R8 $590.0040 PP-APD-40T $650.00
FEATURES:• Automatic Shut-off when spindle is running• 3 second tool changes!• Easy Installation• Available in R8 & 40 taper
B
POWER DRAW BARS/MACHINE ACCESSORIES
Speed Range Inch/Minute: 0-32Bevel Drive Gear Ration: 4:8:1RPM: 4-160Power: 110V, 1 PH, 50/60 cycle
FEATURES:• Easy installation - operator can install with no special tools (instructions provided). • Reduces operator fatigue - improves productivity and safety. • Eliminates drawbar tapping to free tool in collet - reduces operator abuse. • Convenient control - eliminates operator stretching to reach the drawbar. • Assures uniform collet tightening - prevents under tightening and tool slip or over tightening and drawbar breakage. • Operates on shop air supply - filter/lubricator, regulator and gauge included with most units. Provides clean oiled air to ensure long life. • Safety interlock on automatic models prevents accidental engagement. • Used with present tooling - operates R-8, #30 & #40 taper tool holders. Additional special tool holders not needed.
POWERLOCK™ DRAWBARS
AUTOMATIC MECHANICALName And Mill Model
Part Number
Price Each
Part Number
Price Each
ACERULTIMA 3VS R8, Variable KURT-AR1000 $727.00 KURT-AR6000 $454.00
BRIDGEPORTSERIES I STD 2 J R8, Variable KURT-BR1000 $727.00 KURT-BR6000 $454.00
SERIES I STD J R8, Step Pulley KURT-BR1001 $773.00 KURT-BR6001 $485.00 HURCO
SM-1 & SM-2 R8, Variable KURT-HU2000 $727.00 KURT-HU7000 $454.00 KENT
KTM-3VK KURT-KE1000 $727.00 KURT-KE6000 $454.00 KTM-3VS KURT-MI1800 $727.00 KURT-MI6800 $454.00
LAGUNFTV-1 & FTV-2 R8, Variable RL1100 $727.00 RL6100 $454.00
SHARPLMV & HMV R8, Variable KURT-SH1600 $727.00 KURT-SH6600 $454.00
SUPERMAXYC-1 1/2-VS R8, Variable KURT-SM1401 $727.00 KURT-SM6401 $454.00
Available for most manual & CNC mills with standard R-8 collets or 30 or 40 taper tool holders. Automate your present “Knee-Type” milling machines by installing a Kurt PowerLock Drawbar. PowerLock Drawbars reduce tool change time and allow more cutting time in the cycle. This eliminates waste. The whole process using the Kurt automatic or mechanical PowerLock Drawbar cuts the tool change time to one-fourth the time required to change tools manually with wrenches. An added benefit is consistent torque on the drawbar rod. When you multiply the time savings for every tool change on all of your mills, it can really add up.
Don’t see your mill listed? Call us for more information!
B
B
DRAW BARS FOR RIGHT ANGLE ATTACHMENTWhen using the MMRAA-R8, a special drawbar is required and should be ordered with the Dorian right angle attachment. 7/16-20 thread, 4140 heat-treated alloy steel.
LengthMachine Type Bar Hex Desc. Part Number Price
SPECIAL DRAW BAR FOR DORIAN MMRAA-R8Bridgeport Kondia 18.000 8.00 BDBRA-2J800 DN04090 $50.27
STANDARD DRAW BARAlliant Sharp 18.000 6.500 SDB-AS DN04084 $40.70Index Lagun 18.000 8.500 SDB-IL DN04086 $43.09
MADE IN THE* * * * * * ** * * * * * ** * * * * * ** * * * * * *USAUSA
MILLING MACHINE DRAWBARS
Description Thread OAL Part Number PriceStep Pulley 7/16”-20 21-1/8” A-3900-0205 $12.50
Variable Speed 7/16”-20 24-3/16” A-3900-0207 $14.50
• For Bridgeport™ type mills• Available in step pulley or variable speed• Crafted from alloy steel
• Specially designed for each model• X, Y, & Z-axis available• Provides continuously variable feed rate of up to 32 in./min.• Adjustable stops allow automatic shut off• Includes rapid traverse button• Built-in clutch helps prevent damage in overload• Installation of powerfeed will reduce table travel
HI-TORQUE POWERFEEDSNEW
ITEM!
Description Part Number PriceX-Axis JET-350194 $525.00Y-Axis JET-350195 $525.00Z-Axis JET-350196 $595.00
