viscoLAB your clever way to analyze · PET pellets or fl akes are heated up to 160 °C so that the...
Transcript of viscoLAB your clever way to analyze · PET pellets or fl akes are heated up to 160 °C so that the...
viscoLAB your clever way to analyze
For further information:
Food safety department viscotec
www.viscotec.at
Please send your material samples to:Starlinger viscotecAdsdorf 384113 St. MartinAustria
viscoLAB your clever way
YOUR BENEFITS:
viscoLAB
• Documented quality assessment acc. to GMP
• Regular quality control
• Strengthening your position towards suppliers
• Compact material analysis and structured report:
IDENTIFICATION OF CONTAMINANTS: “ROAST TEST”
iV – INTRINSIC VISCOSITY MEASUREMENT
viscoLAB services
By heating up PET fl ake samples discoloration of its contaminants
is achieved. Impurities like PVC, glue, polyolefi ns etc. can be opti-
cally detected and quantifi ed.
Pre-dried PET fl akes and pellets are
melted and pressed with a defi ned
pressure through a defi ned die at
a certain temperature. The fl ow
speed determines the iV value.
GC – GAS CHROMATOGRAPHICANALYSIS
Detection and quantifi cation of the
typical rPET substances Acetaldehyde
(AA) and Limonene. A report including
the chromatogram is provided.
SURFACE MOISTURE TEST
PET pellets or fl akes are heated
up to 160 °C so that the surface
moisture vaporizes. The moisture
content is calculated by relating
the starting to the fi nal weight
of the sample.
Service
Entire material analysis
Flakes roast test
Color test
Surface moisture test
iV measurement
GC analysis
1. Flakes (all 5 tests)
2. Pellets (without roast test)
€ 900,-
€ 300,-
€ 300,-
€ 500,-
€ 1.300,-
€ 2.900,-
€ 2.000,-
Package of 10 tests
Prices & Packages
COLOR TEST
Color measurement of rPET
(amorphous PET after extrusion
and/or crystalline PET after SSP)
according to the L*a*b*- sys-
tem. These three color values
are decisive for the application.
Report includedReport
included