VII SEMESTER - ssit.edu.in

SRI SIDDHARTHA INSTITUTE OF TECHNOLOGY- TUMAKURU (A constituent College of Siddhartha Academy of Higher Education, Tumakuru)

VII SEMESTER

VII Semester B.E. (Subjects and Syllabus as per AICTE-Model Curriculum for UG Course in Engg. & Tech.- Jan. 2018)

Teaching Hours/week Examination

SI

No.

Course and Course

Code

Course Title Teaching

dept.

Board of

Exam.

L

T P C Duration

in Hrs.

CIE SEE Total

Marks

01 PC 18TC701 Optical Fiber Communication TC TC 3 - - 3 3 50 50 100

02 PC 18TC702 Data Communication Networks TC TC 3 - - 3 3 50 50 100

03 PE 18TC7PE3x Professional Elective-III TC TC 3 - - 3 3 50 50 100

04 PE 18TC7PE4x Professional Elective-IV TC TC 3 - - 3 3 50 50 100

05 PC 18TC705 Data Communication Networks

Lab

TC TC - - 2 1 3 50 50 100

06 PC 18TC706 Advanced Communication Lab TC TC - - 2 1 3 50 50 100

07 PC 18TC7TS01 Technical Seminar TC TC - - - 1 - 50 - 50

08 PC 18TC7PW01 Project Phase 1 TC TC - - 4 2 - 50 - 50

Total 12 - 08 17 18 400 350 700

Professional Elective III 18TC7PE31: Advanced Embedded System Design Professional Elective IV 18TC7PE41: Network security and covert communication

18TC7PE32: Speech Processing 18TC7PE42: Wavelet Transform

18TC7PE33: RF Circuit Design 18TC7PE43:DSP Architecture


Syllabus for the Academic Year 2021-22

Department: Electronics & Telecommunication Engineering Semester: 7th

Subject Name: Optical Fiber Communication

Subject Code: 18TC701 L-T-P-S-C: 3-0-0-3

Course Objectives: To study the basics of various types of:

Sl. No.

Course Objectives

1 Optical fibers, signal transmission characteristics.

2 Optical sources, photo detectors, optical components and amplifiers.

UNIT Description Hours

I

Overview of optical fiber communications

Motivations for light wave communications, optical spectral bands, key

elements of optical fiber systems, basic optical laws and definitions,

optical fiber modes and configurations, mode theory for circular

waveguides, single mode fibers, graded-index fiber structure, fiber

materials. Text: 1.1, 1.2, 1.6, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7

08

II Attenuation and Dispersion

Attenuation: absorption, scattering losses, bending losses, signal dispersion

in fibers. Text: 3.1-3.1.1 to 3.1.4, 3.2

08

III Optical sources and Photo detectors

Light-emitting diodes, laser diodes, physical principles of photo diodes,

photo detector noise. Text: 4.2- 4.2.1 to 4.2.3, 4.3-4.3.1, 6.1, 6.2

08

IV

WDM concepts and Optical components

Overview of WDM, passive optical couplers: 2x2 fiber coupler, star

coupler, Mach- Zehnder interferometer multiplexers, isolators and

circulators, fiber grating filters, dielectric thin-film filters, dynamic gain

equalizers, OADM

Text:10.1, 10.2-10.2.1,10.2.4, 10.2.5, 10.3, 10.4, 10.5, 10.8.4, 10.8.5

08

V

Optical amplifiers

Basic applications and types of optical amplifiers, semiconductor optical

amplifiers, erbium-doped fiber amplifiers.

Text:11.1, 11.2, 11.3, 11.4

SONET/SDH

Transmission formats and speeds, Optical interfaces, SONET/SDH rings,

SONET/SDH networks

Text:13.3

07


Question paper Pattern:

Each unit consists of two questions with a choice

Course Outcomes: At the end of this course, students will be able to

Text Book:

Sl. No.

Text Book title Author Publisher

Volume /

Issue

Year of

Edition

1 Optical Fiber

Communications

Gerd

Keiser

McGraw Hill

Education 5

th edition 2013

Reference Books:

Sl. No.


Volume

/ Issue

Year of

Edition

1 Fiber Optic Communication John M.

senior

Pearson

education

3rd

edition 2010

2

Optical Fiber

Communications Principles

and Practice

Joseph C

Palais

Pearson

education

Third

edition

2010

reprint

Course outcome

Descriptions

CO1 Describe the basic properties and various transmission losses of optical

fibers.

CO2 Apply the knowledge of mathematics to solve problems involved in

optical fiber communication.

CO3 Analyze the behavior of optical sources, photo detectors, optical

components and amplifiers.

CO4 Select and employ operational techniques of optical fiber for various

applications.




Subject Name: Data Communication Networks

Subject Code: 18TC702 L-T-P-SC-: 3-0-0-3

Course Objectives:


I

Data communication and network models: Layered tasks, OSI Model,

Layers in OSI model, TCP-IP protocol suite, addressing

Telephone and cable networks for data communication: Dial up modem,

DSL, ADSL, Cable TV networks. Data Link layer: Framing

1.1 to 1.4, 2.1 to 2.5, 6.1, 9.2 to 9.5, 11.1

08

II

Data Link Control: CRC, Flow and error control, Protocols, Noiseless

channels and noisy channels, HDLC.

MULTIPLE ACCESSES: Random access, Controlled access.

10.4, 11.2 to 11.6, 12.1 to 12.2.

08

III

Wired LAN: Ethernet, IEEE standards, Standard Ethernet, Changes in the

standards, Fast Ethernet, Gigabit Ethernet, Wireless LAN IEEE 802.11.

Connecting LANs, Connecting devices, Backbone networks and Virtual

LANs. 13.1 to 13.5, 14.1, 15.1 to 15.3.

08

IV

Network Layer: Logical addressing-Ipv4 addresses, Ipv6 addresses,

Network layer: Internet protocol-Ipv4 and Ipv6, Transition from Ipv4 to

Ipv6. 19.1 to 19.2, 20.1 to 20.4

08

Sl.No. Course Objectives

1 Expose students to basic principles of computer networking.

2

To provide an Overview to the main technologies and models used in

computer networks.

3

Give students the knowledge of internetworking principles and how the

Internet protocols, routing, and applications operate and allow them to

practice in this field forming foundation for more advanced courses in

networking


V

Network layer: Delivery, forwarding, Routing-Hierarchical routing,

Unicast Routing-Distance vector routing Protocols (instability not

considered), Link state routing.

Congestion and QOS: Open loop and closed loop control, Techniques to

improve QOS.

22.1 to 22.3, 24.1 to 24.3, 24.5 to 24.6.

07




Text Books:

Sl.

No. Text Book title Author Publisher

Volume /

Issue

Year of

Edition

1

Data communications

and Networking

Behrouz.A.

Forouzan

Tata

McGraw-Hill

4th Ed 2010

Reference Book:

Sl. No.


Volume / Issue

Year of Edition

1 Computer Networks James F. Kurose,

Keith W. Ross

Pearson

education

2nd

Edition 2003

2

Introduction to Data

communication and

networking

Wayne Tomasi Pearson

education - 2007

Course outcome

Descriptions

CO1

Explain the principles of computer networking, architectures, and

reference models. (L1)

CO2

Acquire knowledge of techniques: framing, switching, LAN, DLL and

channel allocation. (L2)

CO3

Analyze network addressing, data handling, fragmentation, network layer

protocols performance (L4)

CO4

Apply the basic principles of error control, routing, flow control, and

congestion control mechanisms for real time networks. (L3)


Syllabus for the Academic Year – 2021-22

Department: Telecommunication Engineering Semester: 7th

Subject Name: Advanced Embedded System Design

Subject Code: 18TC7PE31 L-T-P-S-C: 3-0-0-3

Course Objectives:


I

Introduction and examples of embedded systems

Introduction to Embedded Systems Definition of Embedded System,

Embedded Systems Vs General Computing Systems, History of Embedded

Systems, Classification, Major Application Areas, Characteristics and

Quality Attributes of Embedded Systems.

(Chapter 1:1.1-1.5, Chapter 3: 3.1-3.2) .

7Hrs

II

Typical Embedded System: Core of the Embedded System: General Purpose and Domain Specific

Processors, ASICs, PLDs, Commercial Off-The-Shelf Components (COTS),

Memory: ROM, RAM, Memory Shadowing, Sensors and Actuators,

Communication Interface: Onboard and External Communication Interfaces

(Chapter 2:2.1-2.4)

9Hrs

III

Embedded Firmware: Reset Circuit, Brown-out Protection Circuit, Oscillator Unit, Real Time

Clock, Watchdog Timer, Embedded Firmware Design Approaches and

Development Languages. (Chapter 2:2.6 Chapter 9:9.1-9.2)

7Hrs

Sl.No. Course Objectives

1 Impart the concepts and architecture of embedded systems

2 To make the students capable of designing embedded systems.

3 Set the required background in embedded firmware concepts and RTOS.

4

Familiarizing the students in industry popular 32-bit Microcontroller,

Embedded System Development Environment.


IV

Real-Time Operating System (RTOS) based Embedded System Design: Operating System Basics, Types of OS, Tasks, Process and Threads,

Multiprocessing and Multitasking, Task Scheduling, Threads, Processes and

Scheduling, Task Communication, Task Synchronization, Device Drivers,

How to Choose an RTOS.

(Chapter 10: 10.1-10.10)

8Hrs

V

Embedded System Development Environment The Integrated Development Environment (IDE), Types of Files Generated

on Cross compilation, Disassembler/ELDompiler, Simulators, Emulators

and Debugging, Target Hardware Debugging, Boundary Scan.

(Chapter 13: 13.1-13.6)

8Hrs



Course Outcomes

Course outcome

Descriptions

CO1

Know about embedded system and realize the characteristics of an

Embedded System.

CO2

Understand the crucial aspects of embedded systems, sensors & actuators,

communication protocols

CO3

Understand the Firmware circuits like brownout protection and watchdog

timer.

CO4 Know about the development environment for embedded systems including

disassembler, simulator and emulator


Text Book:

Sl.

No.


Volume /

Issue

Year of

Edition

1 Introduction to

Embedded Systems Shibu K.V Mc Graw Hill.

- 2009

Reference Books:

Sl.

No.


Volume /

Issue

Year of

Edition

1 Embedded Systems Raj Kamal TMH. - -

2 Embedded System

Design

Frank Vahid,

Tony Givargis,

John Wiley. - -

3 Embedded Systems Lyla, Pearson,

- 2013

4 An Embedded Software

Primer

David E. Simon, Pearson

Education

- -




Subject Name: Speech Processing

Subject Code: 18TEPE32 L-T-P-S-C: 3-0-0-3

Course Objectives:

Sl. No. Course Objectives

1 To provide students with the knowledge of basic characteristics of speech signal in

relation to production and hearing of speech by humans

2 To describe basic algorithms of speech analysis common to many applications

3 To give an overview of applications (recognition, synthesis and coding)

4 To inform about practical aspects of speech algorithms implementation


I

Basic Concepts: Speech Fundamentals: Articulatory Phonetics –

Production and Classification of Speech Sounds; Acoustic Phonetics –

acoustics of speech production; Review of Digital Signal Processing

concepts; Short-Time Fourier Transform, Filter-Bank and LPC Methods.

8

II

Speech Analysis: Features, Feature Extraction and Pattern Comparison

Techniques: Speech distortion measures – mathematical and perceptual –

Log Spectral Distance, Cepstral Distances, Weighted Cepstral Distances

and Filtering, Likelihood Distortions, Spectral Distortion using a Warped

Frequency Scale, LPC, PLP and MFCC Coefficients, Time Alignment and

Normalization – Dynamic Time Warping, Multiple Time – Alignment

Paths.

8

III

Speech Modeling: Hidden Markov Models: Markov Processes, HMMs –

Evaluation, Optimal State Sequence – Viterbi Search, Baum-Welch

Parameter Re-estimation, and Implementation issues.

8

IV

Speech Recognition: Large Vocabulary Continuous Speech Recognition:

Architecture of a large vocabulary continuous speech recognition system –

acoustics and language models – ngrams, context dependent sub-word

units; Applications and present status.

7

V

Speech Synthesis: Text-to- speech synthesis concatenative and waveform

synthesis methods, subword units for TTS, intelligibility and naturalness –

role of prosody, Applications and present status.

8




Course Outcomes

Text Book:

Sl.

No.


Volume

/ Issue

Year of

Edition

1

Fundamentals of

Speech Recognition

Lawrence Rabiner

and Biing-Hwang

Juang

Pearson

Education, - 2003

Reference Books:

Sl.

No.


Volume /

Issue

Year of

Edition

1

The Scientist and

Engineer’s Guide to

Digital Signal Processing

Steven W.

Smith

California

Technical

Publishing

2

Discrete-Time Speech

Signal Processing –

Principles and Practice

Thomas F

Quatieri

Pearson

Education

4

Speech and audio signal

processing- processing and

perception of speech and

music

Ben gold and

Nelson Morgan

Wiley- India

Edition

2006

Edition

Course

outcome Descriptions

CO1 Model speech production system and describe the fundamentals of speech.

CO2 Extract and compare different speech parameters.

CO3 Choose an appropriate statistical speech model for a given application.

CO4 Design a speech recognition system.




Subject Name: RF Circuit Design


Course Objectives: The objectives of this course are to make the students


1 Analyze and design basic RF Electronic Circuits.

2 Design and Study the RF Transmission Lines, Active and Passive Circuits.

3 Design the RF Transistors.

4 Study the RF Mixers.


I

INTRODUCTION TO RF ELECTRONICS The Electromagnetic Spectrum, Microwave bands, RF behavior of passive

components, Tuned resonant circuits, vectors, Inductors and capacitors-

voltage and current in capacitor circuits, Tuned resonant circuits, Vectors,

Inductors and capacitors- voltage and current in capacitor circuits, Tuned RF/

IF Transformers, High frequency limitations of BJT, MOSFET.

8

II

TRANSMISSION LINE ANALYSIS: Examples of transmission lines,

Transmission line equations, Micro strip Transmission Lines, Special

Termination conditions- Sourced and Loaded Transmission Lines.

7

III

RF PASSIVE & ACTIVE COMPONENTS: Filter Basics, Lumped

filter design, Distributed Filter Design, Diplexer Filters, Crystal and Saw

filters, Tunable filters, power combiners/ Dividers, Directional Couplers,

Hybrid couplers, Isolators, RF Diodes, BJTS, FETS, HEMTS and Models.

8

IV

RF TRANSISTOR AMPLIFIER DESIGN: Characteristics of

Amplifiers, Amplifier Circuit Configurations, Amplifier Matching Basics,

Distortion and noise products, stability considerations, small signal

amplifier design, power amplifier design, MMIC amplifiers, Broadband

High power multistage amplifiers, Low noise amplifiers, VGA Amplifiers.

8

V RF MIXERS: Basic characteristics of a mixer, Active mixers, Image

Reject and Harmonic mixers, Frequency domain considerations. 7




Course Outcomes: At the end of the course, students will be able to:

Text Book:

Sl.

No.


Volume /

Issue

Year of

Edition

1 RF Circuit design: Theory

and applications

Reinhold

Ludwing,

Pavel Bretchko

Pearson

Education

Asia

Publication,

New Delhi

- 2001.

Reference Books:

Sl. No.


Volume / Issue

Year of Edition

1

Radio Frequency and

Microwave

Communication

Circuits- Analysis and

Design

Devendra K Misra,

Wiley student

Edition, John

Wiley &

Sons.

2 RF Circuit Design

Christopher

Bowick, Cheryl

Aljuni and John

Biyler,

Elsevier

science

2008

Course


CO1 Describe general RF Circuits, Components and Systems.

CO2 Design impedance matching networks and passive RF Filters.

CO3

Understand RF Receiver front end systems: RF amplifier, Mixer and Local

oscillator for wireless communication Systems.

CO4 Conduct Experiments using Simulation tools for RF Circuit design.


Syllabus for the Academic Year – 2021 - 22


Subject Name: Network Security and Covert Communication


Course Objectives:


I

Transport Level Security: Web Security Considerations, Secure Sockets

Layer, Transport Layer Security, HTTPS, Secure Shell (SSH) E-mail

Security: Pretty Good Privacy, S/MIME, domain keys identified mail.

Text [1]: chapter 17.1, 17.2, 17.3, 17.4, 17.5, 19.1, 19.2, 19.3

8

II

IP Security: IP Security Overview, IP Security Policy, Encapsulation

Security, Payload (ESP), combining security Associations, Internet Key

Exchange. Text [1]: chapter 20.1, 20.2, 20.3, 20.4, 20.5

7

III

Digital Watermarking: Information Hiding, History of Watermarking,

Notation, Communications, Components of Communications Systems,

Classes of Transmission Channels, Secure Transmission, Communication-

Based Models of Watermarking, Basic Model, Watermarking as

Communications with Side Information at the Transmitter, Watermarking as

Multiplexed Communications, Geometric Models of Watermarking,

Distributions and Regions in Media Space, Marking Spaces, Modeling

Watermark Detection by Correlation, Linear Correlation, Normalized

Correlation, Correlation Coefficient, Summary. Text [2]: chapter 1.1, 1.2,

3.1, 3.2, 3.3, 3.4, 3.5

8


1 Identify the security concerns in email and internet protocol.

2 Understand cyber security concepts.

3

Classify the threats (problems) and develop a security model to prevent, detect

and recover from the attacks.

4 Discuss the various covert communication frame work.


IV

Steganography and its applications: Steganographic Communication,

History of Steganography, Importance of Digital Watermarking. Importance

of Steganography the Channel, The Building Blocks, Notation and

Terminology, Information-Theoretic Foundations of Steganography.

Text [2]: chapter 1.3, 1.4, 1.5, 12.1, 12.2, 12.3

8

V

Steganalysis: Steganalysis Scenarios, Detection, Forensic Steganalysis, The

Influence of the Cover Work on Steganalysis, Some Significant Steganalysis

Algorithms, LSB Embedding and the Histogram Attack, Sample Pairs

Analysis, Blind Steganalysis of JPEG Images Using Calibration, Blind

Steganalysis in the Spatial Domain.

Text [2]: chapter 13.1, 13.2

8



Course Outcomes

Text Books:

Sl. No.

Text Book title Author Publisher Volume / Issue

Year of Edition

1 Cryptography and

Network Security

Principles and

Practice

William Stallings Pearson

Education Inc.

6th

Edition 2014

2 Digital

Watermarking and

Steganography

Ingemar J. Cox,

Matthew L. Miller,

Jeffrey A. Bloom,

Jessica Fridrich, and

Ton Kalker

Morgan

Kaufmann

Publishers

2nd

Edition 2008

Sl. No. Descriptions

CO1

Analyze network security protocols and understand the basic concepts of

covert communication. (L4)

CO2 Analyze the Network security problems. (L4)

CO3 Analyze Network Security Framework. (L4)

CO4

Apply concept of Covert Communication framework in computer system

administration. (L3)


Reference Book:

Sl.


Volume

/ Issue

Year of

Edition

1

Network Security:

Private

communication in a

Public World

Kaufman, Radia

Perlman, Mike

Speciner Charlie

Pearson

Education Asia

Second

Edition 2002

2

Cryptography and

Network Security

Atul Kahate Tata

McGrawHill. 2003

3

Information Systems

Security: Security

Management,

Metrics, Frameworks

and Best Practices

Nina Godbole, Wiley

Publications.

2nd

Edition

https://www.amazon.in/s/ref=dp_byline_sr_book_1?ie=UTF8&field-author=Nina+Godbole&search-alias=stripbooks




Subject Name: Wavelet Transform


Course Objectives:


1 To understand the basic concepts of wavelet functions and wavelet transforms.

2 To construct various ortho normal MRA wavelets.

3 To understand MRA Ortho-normal wavelets and their relationships to filter banks

and Bi-orthogonal Wavelets

4 To understand the applications of wavelet transforms


I

Introduction:

Origin of wavelets and its history, Different communities of wavelet,

Classification: continuous and discrete wavelet transforms, Developments

in wavelet theory applications.

8

II

Continuous Wavelet Transform:

Introduction, Continuous time wavelets, Definition of CWT, Constant Q

factor filtering interpretation and Time Frequency Resolution, CWT as an

operator, Inverse CWT.

8

III

Introduction to the Discrete Wavelet Transform and orthogonal

Wavelet decomposition:

Approximations of vectors in nested linear vector subspaces, Multi-

resolution Analysis of L2 (R), Haar Scaling function, Haar wavelet, Haar

wavelet decomposition, Haar wavelet packets and application.

8

IV

MRA Ortho-normal wavelets and their relationships to filter banks

and Bi-orthogonal Wavelets:

Construction of an ortho-normal MRA, Wavelet basis for the MRA,

Digital filtering interpretation, Examples of orthogonal basis generating

wavelets, interpreting ortho-normal MRA for discrete time signals,

Generating scaling functions and wavelets from filter coefficients, Bi-

orthogonal Wavelet bases, Filtering relationship for Bi-orthogonal filters,

Bi-orthogonal scaling functions and wavelets, Two dimensional wavelets,

non-separable multi-dimensional wavelets, Wavelet Packets.

7




Course Outcomes

Text Books:

Sl. No.


Year of Edition

1

Wavelet Transforms –

Introduction and

applications

Raguveer M. Rao

and Ajit S.

Bopardikar

Pearson

Education, 2008

Reference Books:

Sl.


Volume

/ Issue

Year of

Edition

1 A Wavelet Tour of

Signal Processing S. Mallat

Academic

Press

2nd

edition 1999

2 Wavelets and Sub

band Coding

M. Vetterli and J.

Kovacevic Prentice Hall 1995

3

Fundamentals of

Wavelets: Theory,

Algorithms, and

Applications

J.C. Goswami and A.K.

Chand Wiley 2nd ed. 2011.

V

Wavelength Transform and applications:

Transform coding, DTWT for image compression, audio compression,

Wavelet based audio coding, video coding and multi resolution

Techniques, Wavelet de-noising, Speckle removal, Edge detection and

object isolation, Image fusion, Object detection, discrete wavelet multi-

tone modulation.

8

Course outcome

Descriptions

CO1 Describe Continuous Wavelet Transform (CWT) and Discrete Wavelet

Transform (DWT).

CO2 Explain the properties and application of wavelet transform.

CO3 Classify various wavelet transform and explain importance of it.

CO4

Develop and realize computationally efficient wavelet based algorithms for

signal and image processing




Subject Name: DSP Architecture


Course Objectives: The students will be able to


1 Describe the architectural features of DSP processor.

2 Analyze various addressing modes of TMS320C54xx DSP processor

3 Compare the architectural features of different fixed-point DSPs.

4 Interface Memory and Parallel I/O Peripherals and CODEC to Programmable DSP

Device




Course Outcomes


I

Introduction To Digital Signal Processing: Introduction, A Digital

Signal-Processing System, Linear Discrete Fourier Transform and Fast

Fourier Transform Time-Invariant Systems, Decimation and Interpolation.

8

II

Architectures For Programmable Digital Signal-Processing Devices:

Introduction, Basic Architectural Features, DSP Computational Building

Blocks, Bus Architecture and Memory, Data Addressing Capabilities,

Address Generation Unit, Programmability a Program Execution, Features

for External Interfacing.

8

III

Programmable Digital Signal Processors: Introduction, Commercial

Digital Signal-processing Devices, Data Addressing Modes of

TMS320C54xx, Memory Space of TMS320C54xx Processors, Program

Control, TMS320C54xx Instructions and Programming, On-Chip

peripherals, Interrupts of TMS320C54xx Processors, Pipeline Operation of

TMS320C54xx Processors.

8

IV

Implementations Of Basic Dsp Algorithms And Fft Algorithms: The Q-

notation, FIR Filters, IIR Filters, Adaptive filters, An FFT Algorithm for 8-

point DFT Computation, A Butterfly Computation, Overflow and Scaling,

Bit-Reversed Index Generation, FFT Implementation on the

TMS320C54xx, Computation of the Signal Spectrum .

7

V

Interfacing Memory And Parallel I/O Peripherals To Programmable

Dsp Devices: Introduction, Memory Space Organization, External Bus

Interfacing Signals, Memory Interface, Parallel I/O Interface, Programmed

I/O

Interfacing Serial Converters to a Programmable DSP Device:

Introduction, Synchronous Serial Interface, A multi-channel Buffered

Serial Port (McBSP), A CODEC Interface Circuit.

8

Course


CO1 Explain basic requirements and features of programmable DSP devices.

CO2 Describe the importance of McBSP, CODEC interfaces.

CO3 Analyze and develop simple programs to implement different DSP algorithms.

CO4 Design interfaces for digital signal processors with memory and I/O peripherals.


Text Book:

Sl.


Volume

/ Issue

Year of

Edition

1 Digital Signal

Processing

Avatar Singh and

S Srinivasan

Thomson

Learning 2004.

Reference Books:

Sl. No.


Year of Edition

1

Digital Signal

Processors

B Venkataramani

and M Bhaskar TMH

2nd

edition 2011

2

Digital Signal

Processing – A

Practical approach

E.C.Ifeachor and

B.W.Jervis Pearson Education

Second

edition 2002.




Subject Name: Data Communication Networks Lab

Subject Code: 18TC705 L-T-P-S-C: 0-0-3-1.5

Course Objectives:

SL. NO.

LIST OF EXPERIMENTS

1. Write a C program to simulate Bit-stuffing in HDLC.

2. Write a C program to simulate Bit De-stuffing in HDLC.

3. Write a C program for Encryption of a given message using Substitution method.

4. Write a C program for Decryption of a given message using Substitution method.

5. Write a C program for Encryption of a given message using Transposition

method.

6. Write a C program for Decryption of a given message using Transposition

method.

7. Write a C program to simulate Shortest Path Algorithm for the given graph.

8. Write a C program to compute polynomial code Checksum for CRC-CCITT: i)

Without error ii) With error

9. Implement the following operations using DOS interrupts

i) Create and delete a directory ii) Create and delete a file.


1 Expose students to basic principles of computer networking.

2

To provide an Overview to the main technologies and models used in

computer networks.

3

Give students the knowledge of internetworking principles and how the

Internet protocols, routing, and applications operate and allow them to

practice in this field forming foundation for more advanced courses in

networking


10. Using RS 232 cable carry Asynchronous communication between two systems

11. Using NS2 carry out communication between two nodes.

Course Outcomes

Text Book:

Sl.


Volume /

Issue

Year of

Edition

1

Data communications and

Networking

Behrouz .A.

Forouzan

Tata McGraw-

Hill 4th Ed 2010

Course

outcome

Descriptions

CO1 Understand principles and protocols of computer networking layers(L3)

CO2 Acquire knowledge of techniques: framing, routing, security (L3)

CO3 Design algorithms for chained layers (L4)

CO4 Communication on real time networks. (L3)




Subject Name: Advanced Communication Lab

Subject Code: 18TC706 L-T-P-S-C: 0-0-3-1.5

Course Objectives:



1

To conduct experiments on optical fiber communication kit, antennas,

coupler, phase shifter, resonator and digital modulation techniques.

Sl.

No. LIST OF EXPERIMENTS

1. Conduct an experiment on optical fiber kit to set up the following:

i) Analog Link ii) Digital Link

2. Conduct an experiment on optical fiber kit to measure the following:

i) Numerical aperture ii) Acceptance angle iii) Attenuation iv) Bending loss

3. Conduct an experiment to measure power division of Micro strip Directional couplers

and power dividers.

4. Conduct an experiment to measure resonance of Micro strip ring Resonator and plot

resonance graph.

5. RFID Tag reader

6. RF Communication using RF433 MHz

7. Applications of Bluetooth

8. Applications using node MCU

9. Applications of GSM

Course

outcome

Descriptions

CO1 Measure the various optical fiber communication losses.

CO2 Analyze various concepts related to microwave bench.

CO3 Understand various concepts related to micro strip components.

CO4 Demonstrate digital modulation techniques.


VIII Semester B.E. (Common to all UG programs: EE/ EC/TC/ML/CS/IS/ ME/IM/CV) (Subjects and Syllabus as per AICTE-Model Curriculum for UG Course in Engg. & Tech.- Jan. 2018)

Teaching Hours/week Examination

SI

No.

Course and Course

Code

Course Title Teaching

dept.

Board of

Exam.

L

T P C Duration

in Hrs.

CIE SEE Total

Marks

01 PE 18TC8PE1x Professional Elective -V TC EC 3 - - 3 3 50 50 100

02 PE 18TC8PE2x Professional Elective-VI TC EC 3 - - 3 3 50 50 100

03 PE 18TC8PE3x Professional Elective-VII TC EC 3 - - 3 3 50 50 100

04 PC 18TC8PW02 Project Phase-2 TC EC - - 14 7 3 50 50 100

Total 09 - 14 16 12 200 200 400

L-Lecture, T-Tutorial, P-Practical, CIE-Continuous Internal Evaluation, SEE-Semester End Examination

Professional Elective V

18TC8PE11: Satellite Communication

18TC8PE12: SOC Communication Architecture

18TC8PE13: Automotive Electronics

Professional Elective VI

18TC8PE21: IoT and Wireless Sensor Networks

18TC8PE22: Multirate Systems and Filter Banks

18TC8PE23: Biomedical Signal Processing

Professional Elective VII

18TC8PE31: Pattern Recognition

18TC8PE32: Nano Electronics

18TC8PE33: Cognitive Radio Networks




Subject Name: Satellite Communication


Course Objectives:


I

Orbital Mechanics and Launchers – Orbital mechanics, look angle

Determination, Orbital perturbations, Orbit determination, Launches and

Launch Vehicles, Orbital effects in communications Systems performance.

(Text 1: chapter 2 – 2.1, 2.2, 2.3, 2.4, 2.5, 2.6)

8

II

Satellites- Satellite subsystems, Attitude and orbit control systems

(AOCS), Telemetry, Tracking, Command and Monitoring, Power systems,

Communications subsystems and Satellite antennas.

(Text 1: chapter3 – 3.1, 3.2, 3.3, 3.4, 3.5, 3.6)

8

III

Satellite Link Design- Introduction, Basic Transmission Theory, System

Noise Temperature and G/T Ratio, Design of Downlinks, Satellite Systems

using Small Earth Stations, Uplink Design, Design for Specified C/N.

(Text 1: chapter4 – 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7)

8

IV

Multiple Access & VSAT systems- Introduction, Code Division Multiple

Access, FDMA, TDMA, Error Control for Digital Satellite Links:

Implementation of Error Detection on satellite Links. VSAT System:

Introduction, Overview of VSAT systems.

(Text 1: chapter6 – 6.1, 6.2, 6.3, 6.8 and chapter9 – 9.1, 9.2)

8

Sl. No Course Objectives

1 Understand orbital mechanics and orbital elements.

2 Discuss various satellite subsytems and study of launch vehicles.

3 Understand the satellite access schemes.

4 Discuss the concepts of GPS.


V

Satellite Navigation and the Global Positioning System - Introduction,

Radio and Satellite Navigation, GPS position Location Principles, GPS

receivers and Codes, Satellite Signal Acquisition, GPS Navigation

Message, GPS Signal Levels, Time Accuracy, GPS Receiver Operation,

GPS C/A code accuracy.

(Text 1: chapter12 – 12.1 – 12.11)

7

Question paper Pattern: Each unit consists of two questions with a choice

Course Outcomes: At the end of the course the student will be to:

Text Book: Sl. No.


Year of Edition

1 Satellite

Communications

Timothy Pratt, Charles

Bostian, Jeremy

Allnutt

John Wiley &

Sons

Second

edition

-

Reference Book: Sl.


Volume /

Issue

Year of

Edition

1 Satellite

Communications

W. L. Pitchand, H.

L. Suyderhoud, R.

A. Nelson

Pearson Education 2nd Ed 2007

2

Satellite

communication

concept and

applications

K N Rajarao PHI 2

nd

Edition 2013

3 Satellite

Communications Dennis Roddy

McGrawHill

International edition

4th

Edition 2006

Course

outcome

Descriptions

CO1

Ability to understand the concept of orbital mechanics,

different types of satellite subsystems, and multiple access

technologies. (L4)

CO2

Analyze the system noise temperature, look angles for

practical applications. (L3)

CO3 Design the satellite link budget. (L5)

CO4

Understand the concept of VSAT systems and GPS working

principles. [L2]




Subject Name: SOC Communication Architecture


Course Objectives:


I

Introduction to SoC: Review of Moore’s law and CMOS scaling,

benefits of System on Chip integration in terms of cost, power, and

performance. Comparison on System on Board, System on Chip, and

System-in-Package. Typical goals in SoC design cost reduction, power

reduction, design effort reduction, performance maximization.

Productivity gap issues and the ways to improve the gap – IP based design

and design reuse.

8

II

System On Chip Design Process: A canonical SoC Design, SoC Design

flow, waterfall vs spiral, top-down vs bottom-up, Specification

requirement, Types of Specification, System Design Process, System level

design issues, Soft IP vs Hard IP, IP verification and Integration,

Hardware-Software co design, Design for timing closure, Logic design

issues, Verification strategy, On chip buses and interfaces, Low Power,

Hardware Accelerators in Soc.

8

III

Embedded Memories: cache memories, flash memories, embedded

DRAM. Topics related to cache memories. Cache coherence. MESI

protocol and Directory-based coherence.

8


1 Analyze the functional and nonfunctional performance of the system early in

the design process to support design decisions.

2 Analyze hardware/software tradeoffs, algorithms, and architectures to optimize

the system based on requirements and implementation constraints.

3 Analyze tradeoffs and explore architecture and mico-architecture design spaces

to develop and synthesize custom hardware accelerators.

4 Understand hardware, software, and interface synthesis.


IV

Interconnect Customization and Configuration: Bus architecture and its

limitations. Network on Chip (NOC) topologies. Mesh-based NoC.

Routing in an NoC. Packet switching and wormhole routing.

8

V

MPSoCs: What, why, How MPSoCs, Techniques for designing MPSoCs,

Performance and flexibility for MPSoCs design Case Study: A Low Power

Open Multimedia Application Platform for 3G Wireless.

7




Text Book: Sl.


Volume

/ Issue

Year of

Edition

1

"On-Chip

Communication

Architectures: System on

Chip Interconnect”

Sudeep Pasricha

and Nikil Dutt

Morgan

Kaufmann

Publishers

- 2008

2

“Introduction to system

on package SOP

Miniaturization of the

Entire System”

Rao R. Tummala,

Madhavan

Swaminathan

McGraw-

Hill - 2008

Course

outcome

Descriptions

CO1

Apply concepts of Moore’s law, CMOS scaling to understand the System on

Chip with its need, evolution, challenges, goals, superiority over system on

board & stacked ICs in package.

CO2 Analyze Typical goals in SoC design and also inter connect architecture PO3.

CO3 Design solutions for issues at system level, and issues of Hardware-Software co

design and make an effective presentation, IP based design and design reuse

CO4 Discuss Productivity gap issues, Verification strategy, Routing in an NoC.

Packet switching and wormhole routing.


Reference Book:

Sl. No.

Text Book title Author Publisher Volume /

Issue Year of Edition

1

“Design of System on a

Chip: Devices and

Components

Ricardo Reis

1st Edition,

Springer

- 2004

2

“Co-Verification of

Hardware and Software for

ARM System on Chip

Design (Embedded

Technology)”

Jason Andrews Newnes, BK

and CDROM - -




Subject Name: Automotive Electronics


Course Objectives:


I

Automotive Fundamentals Overview –Evolution of Automotive

Electronics, Automobile Physical Configuration, Survey of Major

Automotive Systems, The Engine – Engine Block, Cylinder Head, Four

Stroke Cycle, Engine Control, Ignition System - Spark plug, High voltage

circuit and distribution, Spark pulse generation, Ignition Timing, Diesel

Engine, Drive Train - Transmission, Drive Shaft, Differential, Suspension,

Brakes, Steering System (Text 1: Chapter1), Starter Battery –Operating

principle: (Text 2: Pg. 407-410)

The Basics of Electronic Engine Control –Motivation for Electronic

Engine Control – Exhaust Emissions, Fuel Economy, Concept of an

Electronic Engine control system, Definition of General terms, Definition

of Engine performance terms, Engine mapping, Effect of Air/Fuel ratio,

spark timing and EGR on performance, Control Strategy, Electronic Fuel

control system, Analysis of intake manifold pressure, Electronic Ignition.

(Text 1: Chapter 5) L1, L2

8

II

Automotive Control System applications of Sensors and Actuators – Typical Electronic Engine Control System, Variables to be measured (Text

1: Chapter 6)

Automotive Sensors – Airflow rate sensor, Strain Gauge MAP sensor,

Engine Crankshaft Angular Position Sensor, Magnetic Reluctance Position

Sensor, Hall effect Position Sensor, Shielded Field Sensor, Optical

Crankshaft Position Sensor, Throttle Angle Sensor (TAS), Engine Coolant

Temperature (ECT) Sensor, Exhaust Gas Oxygen (O2/EGO) Lambda

Sensors, Piezoelectric Knock Sensor. (Text 1: Chapter 6)

Automotive Actuators –Solenoid, Fuel Injector, EGR Actuator, Ignition

System (Text 1: Chapter 6) L1, L2

8


1 Understand the basics of automobile dynamics and design electronics to

complement those features.

2 Design and implement the electronics that attribute the reliability, safety, and

smartness to the automobiles, providing add-on comforts.


III

Digital Engine Control Systems –Digital Engine control features, Control

modes for fuel Control (Seven Modes), EGR Control, Electronic Ignition

Control - Closed loop Ignition timing, Spark Advance Correction Scheme,

Integrated Engine Control System - Secondary Air Management,

Evaporative Emissions Canister Purge, Automatic System Adjustment,

System Diagnostics. (Text 1: Chapter 7)

Control Units –Operating conditions, Design, Data processing,

Programming, Digital modules in the Control unit, Control unit software.

(Text 2: Pg. 196-207) L1, L2

8

IV

Automotive Networking – Bus Systems – Classification, Applications in

the vehicle, Coupling of networks, Examples of networked vehicles (Text

2: Pg. 85-91), Buses - CAN Bus, LIN Bus, MOST Bus, Bluetooth, Flex

Ray, Diagnostic Interfaces. (Text 2: Pg. 92- 151)

Vehicle Motion Control – Typical Cruise Control System, Digital Cruise

Control System, Digital Speed Sensor, Throttle Actuator, Digital Cruise

Control configuration, Cruise Control Electronics (Digital only), Antilock

Brake System (ABS) (Text 1: Chapter 8) L1, L2

8

V

Automotive Diagnostics – Timing Light, Engine Analyzer, On-board

diagnostics, Offboard diagnostics, Expert Systems, Occupant Protection

Systems – Accelerometer based Air Bag systems. (Text 1: Chapter 10)

Future Automotive Electronic Systems – Alternative Fuel Engines,

Electric and Hybrid vehicles, Fuel cell powered cars, Collision Avoidance

Radar Warning Systems, Low tire pressure warning system, Heads Up

display, Speech Synthesis, Navigation – Navigation Sensors - Radio

Navigation, Signpost navigation, dead reckoning navigation, Voice

Recognition Cell Phone dialing, Advanced Cruise Control, Stability

Augmentation, Automatic driving Control (Text 1: Chapter 11) L1, L2, L3

7




Course outcome

Descriptions

CO1 Acquire an overview of automotive components, subsystems, and basics of

Electronic Engine Control in today’s automotive industry.

CO2

Use available automotive sensors and actuators while interfacing with

microcontrollers / microprocessors during automotive system design.

CO3 Discuss the networking of various modules in automotive systems,

communication protocols and diagnostics of the sub systems.


Text Book:

Sl. No.


Year of Edition

1

Understanding Automotive

Electronics

William B.

Ribbens

Elsevier

Publishing, 6th

Edition

- -

2

Bosch Automotive Electrics

and Automotive Electronics

Systems and Components,

Networking and Hybrid Drive

Robert

Bosch

Gmbh (Ed.)

John Wiley&

Sons Inc., 5th

edition

- 2007

CO4

Design and implement the electronics that attribute the reliability, safety, and

smartness to the automobiles, providing add-on comforts and get fair idea on

future Automotive Electronic Systems.




Subject Name: IoT and Wireless Sensor Networks


Course Objectives:


I

Overview of Internet of Things: IoT Conceptual Framework, IoT

Architectural View, Technology Behind IoT, Sources of IoT, M2M

communication, Examples of IoT. Modified OSI Model for the IoT/M2M

Systems, data enrichment, data consolidation and device management at

IoT/M2M Gateway, web communication protocols used by connected

IoT/M2M devices, Message communication protocols (CoAP-SMS, CoAP-

MQ, MQTT, XMPP) for IoT/M2M devices.

8

II

Architecture and Design Principles for IoT: Internet connectivity,

Internet-based, communication, IPv4, IPv6,6LoWPAN protocol, IP

Addressing in the IoT, Application layer protocols: HTTP, HTTPS, FTP,

TELNET and ports.

Data Collection, Storage and Computing using a Cloud Platform:

Introduction, Cloud computing paradigm for data collection, storage and

computing, Cloud service models, IoT Cloud- based data collection, storage

8


1

The course has been introduced to make the student be aware about the concepts of

Internet of things.

2 To be aware of the basics of wireless sensor networks.

3

To enable them to have a brief idea about how to grow with the advancing

technologies

4

The course also aims at inculcating the ideas and concepts of Sensor networks

which may be considered as the basic building blocks of any IoT system.


and computing services using Nimbits.

III

Prototyping and Designing Software for IoT Applications: Introduction,

Prototyping Embedded device software, Programming Embedded Device

Arduino Platform using IDE, Reading data from sensors and devices,

Devices, Gateways, Internet and Web/Cloud services software development.

Programming MQTT clients and MQTT server. Introduction to IoT privacy

and security. Vulnerabilities, security requirements and threat analysis, IoT

Security Tomography and layered attacker model.

8

IV

Overview of Wireless Sensor Networks:

Challenges for Wireless Sensor Networks, Enabling Technologies for

Wireless Sensor Networks. Architectures: Single-Node Architecture -

Hardware Components, Energy Consumption of Sensor Nodes, Operating

Systems and Execution Environments, Network Architecture-Sensor

Network Scenarios, Optimization Goals and Figures of Merit, Design

principles for WSNs, Service interfaces of WSNs Gateway Concepts.

8

V

Communication Protocols:

Physical Layer and Transceiver Design Considerations, MAC Protocols for

Wireless Sensor Networks, Low Duty Cycle Protocols and Wakeup

Concepts - S-MAC, The Mediation Device Protocol, Wakeup Radio

Concepts, Contention based protocols (CSMA, PAMAS), Schedule based

protocols (LEACH, SMACS, TRAMA) Address and Name Management in

WSNs, Assignment of MAC Addresses, Routing Protocols- Energy-

Efficient Routing, Geographic Routing, Hierarchical networks by clustering.

7





Text Books:

Sl.

No.


Volume

/ Issue

Year of

Edition

1

Internet of Things-

Architecture and design

principles

Raj Kamal McGraw Hill

Education

1st

Edition -

2

Protocols And

Architectures for Wireless

Sensor Networks

Holger Karl &

Andreas

Willig

John Wiley - 2005

3

Wireless Sensor Networks-

An Information Processing

Approach

Feng Zhao &

Leonidas J.

Guibas

Elsevier - 2007

Reference Books:

Sl. No.


Volume / Issue

Year of Edition

1

Wireless Sensor

Networks-Technology,

Protocols, And

Applications

Kazem

Sohraby,

Daniel Minoli,

& Taieb Znati

John Wiley - 2007

2 Wireless Sensor Network

Designs Anna Hac John Wiley - 2003

Course outcome

Descriptions

CO1 Describe the OSI Model for the IoT/M2M Systems.

CO2 Understand the architecture and design principles for IoT.

CO3 Learn the programming for IoT Applications.

CO4 Identify the communication protocols which best suits the WSNs.




Subject Name: Multirate Systems and Filter Banks


Course Objectives:


1 To enable the students to understand the fundamentals of Multirate systems.

2 To enable the students to understand the maximally decimated filter banks.

3

To enable the students to understand the para-unitary perfect reconstruction filter

banks.

4

To enable the students to understand the linear phase perfect reconstruction QMF

banks and cosine modulated filter banks.






I

Fundamentals of Multi-rate Systems: Basic multi-rate operations,

interconnection of building blocks, poly-phase representation, applications

of multi-rate systems,

Chapter 4-4.1.1,4.1.2,4.2,4.3,4.3.1,4.5.1,4.5.2,4.5.4

8

II

Maximally decimated filter banks: Errors created in the QMF bank, alias-

free QMF system, power symmetric QMF banks, M-channel filter banks,

poly-phase representation, perfect reconstruction systems, trans-

multiplexers.

Chapter5-5.1.1, 5.1.2, 5.2, 5.2.1, 5.3, 5.3.1, 5.4, 5.4.1, 5.4.2, 5.6, 5.6.3, 5.9

9

III

Para-unitary Perfect Reconstruction Filter Banks: Lossless transfer

matrices, filter bank properties induced by paraunitariness, two channel

Para-unitary lattices, transform coding.

Chapter 6 - 6.0,6.1.1,6.1.2,6.2,6.2.1,6.2.2,6.3,6.3.1,6.5

8

IV

Linear Phase Perfect Reconstruction QMF Banks: Necessary

conditions, lattice structures for linear phase FIR PR QMF banks, formal

synthesis of linear phase FIR PR QMF lattice.

Chapter 7-7.1, 7.2, 7.3

6

V

Cosine Modulated Filter Banks: Pseudo-QMF bank and its design,

efficient poly-phase structures, properties of cosine matrices, cosine

modulated perfect reconstruction systems.

Chapter 8-8.0, 8.1, 8.1.1, 8.1.2, 8.3, 8.4, 8.5, 8.5.5

8

Course


CO1 Understand the concept of Decimation, Interpolation and their applications

CO2 Analyze various filter banks

CO3 Design Various filter banks

CO4 Discuss the applications of filter banks


Text Books:

Sl.

No.


Volume /

Issue

Year of

Edition

1 Multirate Systems

and Filter Banks P.P. Vaidyanathan

Pearson

Education

(Asia) Pvt.

Ltd,

- 2004.

Reference Book:

Sl.

No.


Volume /

Issue

Year of

Edition

1

Wavelets and Filter

Banks

Gilbert Strang

and Truong

Nguyen,

Wellesley-

Cambridge

Press

- 1996

2 Multirate Digital

Signal Processing N. J. Fliege,

John Wiley &

Sons, USA,

- 2000.




Subject Name: Biomedical Signal Processing


Course Objectives:


1 Understand the basic signals in the field of biomedical.

2

Study origins and characteristics of some of the most commonly used biomedical

signals, including ECG.

3 Understand Sources and characteristics of noise and artifacts in bio signals.

4 Understand use of bio signals in diagnosis, patient monitoring and physiological

investigation.






I

Introduction to Biomedical Signals: The nature of biomedical signals,

examples of biomedical signals, objectives and difficulties in biomedical signal

analysis. (Chapter 1)

Electro-cardiography: Basic electrocardiography, ECG leads systems, ECG

signal characteristics. (Chapter 2: 2.1-2.3)

8

II

Basics of Digital Filtering: Digital filters, the z transform, Elements of a digital

filter, Types of digital filters, Transfer function of a difference equation, the z-

plane pole-zero plot, the rubber membrane concept. (Chapter 4: 4.1-4.7)

Adaptive Filters: Principal noise canceller model, 60-Hz adaptive canceling

using a sine wave model, other applications of adaptive filtering. (Chapter 8:

8.1- 8.3)

8

III

Signal Averaging: Basics of signal averaging, Signal averaging as a digital

filter, a typical average, Software for signal averaging, Limitations of signal

averaging. (Chapter 9: 9.1-9.5)

8

IV Data Reduction Techniques: Turning point algorithm, AZTEC algorithm, Fan

algorithm, Huffman coding. (Chapter 10: 10.1-10.4) 7

V

ECG QRS Detection and Analysis Systems: Power spectrum of the ECG,

Band pass filtering techniques, Differentiation techniques, Template matching

techniques, A QRS detection algorithm, ECG interpretation, ST-segment

analyzer, Portable arrhythmia monitor. (Chapter 12: 12.1-12.5, Chapter 13:

13.1-13.3)

8

Course outcome

Descriptions

CO1 Understand various methods of acquiring and processing bio signals.

CO2 Model a biomedical system.

CO3

Understand various sources of bio signal distortions and its remedial

techniques.


Text Book:

Sl.

No.


Volume /

Issue

Year of

Edition

1 Biomedical Signal

Processing Willis J. Tompkins

Prentice-Hall

of India, - 2001.

Reference Book:

Sl.

No.


Volume /

Issue

Year of

Edition

1 Biomedical Signal

Analysis

Rangaraj M.

Rangayyan

John Wiley

and sons, Inc. - 2002

CO4 Analyze ECG and EEG signal with characteristic feature points.




Subject Name: Pattern Recognition


Course Objectives:


1 Understand the fundamentals of pattern recognition techniques

2 Learn and understand statistical and non-parametric models of pattern recognition

3

Understand pattern recognition theories such as Bayes classifier, linear

discriminant analysis

4 Understand the principles of clustering approaches to pattern recognition


I Introduction to Pattern Recognition: Applications of pattern recognition,

statistical decision theory, image processing and analysis. (Text1: 1.1 - 1.3) 7

II

Probability: Introduction, probability of events, random variables, joint

distributions and densities, moments of random variables, estimation of

parameters from samples, minimum risk estimators, problems. (Text1: 2.1 -

2.5)

8

III

Statistical Decision Making: Introduction, Bayes' theorem, multiple

features, conditionally independent features, decision boundaries, unequal

costs of error, estimation of error rates, problems. (Text1: 3.1- 3.7)

8

IV

Nonparametric Decision Making: Introduction, histograms, kernel and

window estimators, nearest neighbor classification techniques, adaptive

decision boundaries, adaptive discriminant functions, minimum squared

error discriminant functions, problems. (Text1: 4.1 – 4.6)

8

V

Clustering: Introduction, Hierarchical clustering: Single Linkage Algorithm,

Complete Linkage Algorithm, Average Linkage Algorithm & Wards

method, Partitional clustering: Forgy’s Algorithm and k-means algorithm,

problems. (Text1: 5.1 – 5.3)

8




Text Books:

Sl.

No.


Volume

/ Issue

Year of

Edition

1 Pattern

Recognition and

Image Analysis

Earl Gose, Richard

Johnsonbaugh and Steve

Jost

Prentice-

Hall of India - 2003.

Reference Book:

Sl. No.


Volume / Issue

Year of Edition

1 Pattern Recognition-

Statistical, Structural

and Neural

applications

Robert J Schalkott John Willey

Publications - -

2 Pattern classification

Richard O Duda,

Peter E. Herd and

David & Stork

John Wiley

and sons,

Inc.

2nd Ed. 2001

Course outcome

Descriptions

CO1 Define, recollect and describe the fundamental concepts in pattern recognition.

CO2

Analyze the concepts of parametric and non-parametric classification using

probability theory of events, random variables, and decision boundaries.

CO3

Solve the statistical decision, non-parametric decision making and clustering

problems.

CO4 Compare and analyze different decision boundaries and clustering methods.




Subject Name: Nano Electronics


Course Objectives: Students undergoing this course are exposed to:


1 Know the types of nanotechnology, atomic structure, molecular technology and

preparation of nano materials.

2 Understand the fundamentals of nano electronics and its properties.

3 Know the Silicon MOSFET’s, QTD and carbon nano tubes.

4 Understand the fundamentals of molecular electronics.





I

Mesoscopic physics and Nanotechnologies: Introduction to

nanotechnology, Impacts, Limitations of conventional microelectronics,

Trends in microelectronics and optoelectronics, characteristic lengths in

mesoscopic systems, Quantum mechanical coherence. Classification of

Nano structures, Low dimensional structures. Quantum wells, wires and

dots, Density of states and dimensionality, semiconductor hetero structures

(Text 1: 1.1 to 1.7)

8

II

Nanolayers: Production of Nanolayers: physical vapour deposition,

chemical vapour deposition. Molecular Beam Epitaxy, Ion Implantation,

Formation of Silicon. Dioxide- dry and wet oxidation methods,

Characterization of Nanolayers. (Text 2: 4.1, 4.1.1 to 4.1.5, 4.2)

8

III

Nanostructures: Introduction to characterization of nanostructures, tools

used for of nano materials characterization, microscope-optical, electron,

and electron microscope. Principle of operation of Scanning Tunnelling

Microscope, Atomic Force Microscope, Scanning Electron microscope,

Specimen interaction. Transmission Electron Microscope. X-Ray Diffraction

analysis, PL & UV Spectroscopy, Particle size analyser. Two-dimensional

electronic system, two-dimensional behaviour, MOSFET structures, Hetero

junctions. Quantum wells, modulation doped quantum wells, multiple

quantum wells. The concept of super lattices Kronig - Penney model of

super lattice. (Text 2: 5.1, 5.2, 5.3, 5.4.1, 5.4.2, 5.4.3)

8

IV

Transport of charge in Nanostructures under Electric field: parallel

transport, hot electrons, perpendicular transport. Quantum transport in

nanostructures, Coulomb blockade. Transport of charge in magnetic field -

Effect of magnetic field on a crystal. Aharonov-Bohm effect, the Shubnikov-

de Hass effect, the quantum Hall effect. (Text 1: 6.1 to 6.6)

7

V

Nano-electronic devices: MODFETS, heterojunction bipolar transistors.

Resonant tunnel effect, RTD, RTT, Hot electron transistors. Coulomb

blockade effect and single electron transistor, CNT transistors.

Heterostructure semiconductor laser. Quantum well laser, quantum dot LED,

quantum dot laser. Quantum well optical modulator, quantum well sub band

photo detectors, principle of NEMS. (Text1: 8.1 to 8.6)

8



Text Books:

Sl.

No.


Volume /

Issue

Year of

Edition

1 Nanotechnology for

Microelectronics and

optoelectronics

J.M. Martinez-

Duart, R.J. Martin

Palma, F. Agulle

Rueda

Elsevier - 2006

2 Nanotechnology and

Nanoelctronics W.R. Fahrner Springer - 2005

Reference Book:

Sl.

No.


Volume /

Issue

Year of

Edition

1

Introduction to

Nanoscience &

Technology

Chattopadhyay,

Banerjee PHI - 2012

2 Fundamentals of

Nanoelectronics

George W.

Hanson

Pearson

Education - 2009

3 Nanoelectronics and

nanosystems

K. Goser, P.

Glosekotter, J.

Dienstuhl

Springer - 2004

Course


CO1 Understand basic concepts of nano electronic devices and nano technology.

CO2 Discuss the types of nanotechnology, molecular technology and the preparation

of nano materials.

CO3 Describe the concepts of silicon MOSFET and Quantum Transport Devices.

CO4 Explain the concepts, functions, fabrications and applications of molecular

electronics.




Subject Name: Cognitive Radio Networks


Course Objectives:


1 To understand the evolving software defined radio and cognitive radio techniques

and their essential functionalities

2 To study the basic architecture and standard for cognitive radio

3 To understand the physical, MAC and Network layer design of cognitive radio

4 To expose the student to evolving applications and advanced features of cognitive

radio


I

Digital Communication fundamentals for cognitive radio: Introduction,

data transmission, digital modulation techniques, probability of bit error,

multicarrier modulation, multicarrier equalization techniques. (Text 1: 3.1

to 3.6)

8

II

Spectrum access and sharing: Introduction, unlicensed spectrum sharing,

licensed sharing, secondary spectrum access, non-real time SSA, real-time

SSA. (Text 1: 5.1 to 5.6) 8

III

Cognitive Radio Architecture: Introduction to architecture, functions,

components and design rules: SDR components, iCR node functional

components, the cognition components, radio knowledge in architecture,

user knowledge in architecture, watchdog timer, the cognition cycle. (Text

2: 3.1: 3.1.10, 3.2: 3.2.1, 3.2.2, 3.2.3, 3.2.7, 3.2.8, 3.2.9, 3.2.13, 3.3)

8

IV

Software Defined Radio Architectures for Cognitive Radios:

Introduction, SDR and cognitive radio relationship, SDR architectures,

Software tunable analog radio components, antenna systems,

reconfigurable digital radio technologies, basic digital radio components.

(Text 2: 4.1 to4.7)

8

V

Applications of cognitive radio: Introduction, Cognitive wireless

communication applications, resource optimization and quality enhancing

applications, interoperability, end user product/service specific cognitive

wireless communication applications, cognitive application challenges.

(Text 2: 13.1 to 13.3)

7




Text Books: Sl. No.

Text Book title Author Publisher Volume /

Issue Year of Edition

1 Cognitive Radio

Communications and

Networks

Alexander M.

Wyglinski, Maziar

Nekovee, Thomas

Hou

Academic

Press, Elsevier - 2010

2 Cognitive Radio,

Software Defined

Radio, and Adaptive

Wireless Systems

Huseyin Arslan

(Ed.) Springer - 2007

Reference Book: Sl.

No.


Volume

/ Issue

Year of

Edition

1 Cognitive Radio

Technology Bruce Fette Newnes - 2006

2 Cognitive Radio

Networks

Kwang-Cheng Chen,

Ramjee Prasad

John Wiley

and Sons - 2009

3 Principles of

Cognitive Radio

Ezio Biglieri, Professor

Andrea J. Goldsmith, Dr

Larry J. Greenstein,

Narayan B. Mandayam, H.

Vincent Poor

Cambridge

University

Press

- 2012

Course


CO1 Gain knowledge on the design principles on software defined radio and

cognitive radio.

CO2 Develop the ability to design and implement algorithms for cognitive radio

spectrum sensing and dynamic spectrum access.

CO3 Build experiments and projects with real time wireless applications.

CO4 Apply the knowledge of advanced features of cognitive radio for real world

applications.

VII SEMESTER - ssit.edu.in

Documents

Transcript of VII SEMESTER - ssit.edu.in