faculty.olympic.edufaculty.olympic.edu/kblackwell/docs/cmptr173/VMware/Win2k8/DOC... · Web...
Transcript of faculty.olympic.edufaculty.olympic.edu/kblackwell/docs/cmptr173/VMware/Win2k8/DOC... · Web...
VMWare Workstation Installation
Microsoft Windows Server 2008 Enterprise with Service Pack 2
Installation of MS Windows Server 2008 on VMware Workstation
Starting Vmware Workstation
Creating a new virtual machine.
204/20/09
Go to the start menu and start the VMware Workstation program.
*Note: The following instructions are written starting at the point after the download and/or installation of VMware Workstation. If you have any questions regarding the download or installation see your instructor.
Select “New Virtual Machine” on the Home page.
Installation of MS Windows Server 2008 on VMware Workstation
Selecting the Configuration Method
Choosing the Operating System
304/20/09
For this installation, we will stay with the default of “Typical” configuration.
The “Custom” configuration should be done by more advanced users or with the guidance of your instructor.
Click Next.
Select “Microsoft Windows” for guest operating system and using the drop down arrow, choose version “Windows Server 2008”.
Click Next.
Installation of MS Windows Server 2008 on VMware Workstation
Naming the Virtual Machine
Selecting the Network Type
404/20/09
In this step you need to give your virtual machine a descriptive name and select a location for it.
It’s good practice to include the OS version in the name and create a folder with the same name just for that particular virtual machine.
Click Next.
You have three options for network settings. The more typical choice is “Use bridged networking”, which allows you to assign the virtual machine its own static IP address.
Click Next.
Installation of MS Windows Server 2008 on VMware Workstation
How big should the VM be?
Creating the VM
504/20/09
Although the size of your VM can be proportional to the size of the hard drive that it is on, we will make ours 16 GB.
Keep the default setting of “Store virtual disk as a single file”.
Click Finish.
Check the settings to make sure they are correct and then click Finish.
Installation of MS Windows Server 2008 on VMware Workstation
Starting the installation
Capturing the installation media
604/20/09
You now need to start the virtual machine to start the install process.
You may do this by one of two methods.
1. Clicking the play (start) button on the Power toolbar or,
2. Clicking the play (start) link in the Commands section.
For this install we will be using an ISO image.
So you will need to edit the CD-ROM settings. To do this, right click on the CD-ROM icon in the bottom taskbar and select “Settings”.
You should see the dialog box similar to the one shown here.
You now need to start the virtual machine to start the install process.
You may do this by one of two methods.
1. Clicking the play (start) button on the Power toolbar or,
2. Clicking the play (start) link in the Commands section.
Installation of MS Windows Server 2008 on VMware Workstation
Finding the image
Reboot the Virtual Machine
704/20/09
You will now need to browse for the OS image that you should already have downloaded. It will have an .iso extension.
Make sure that the “Use ISO image” radial button is selected.
Click OK.
Once VMware has captured the ISO you will need to reboot the machine. You can do this by:
1) Selecting the “Reset the Virtual Machine” button on the Power toolbar or,
2) Selecting “Reset” under VM>Power on the menu toolbar.
Installation of MS Windows Server 2008 on VMware Workstation
Installation
Installation
804/20/09
After rebooting the VM just follow the setup instructions on the screen.
Click: Next.
“Install Now”.
Installation of MS Windows Server 2008 on VMware Workstation
Select the OS Version
License Terms
904/20/09
For this installation we are going with Windows Server 2008 Enterprise without Hyper-V (Full Installation)
Check “I accept the license terms”.
Click Next
Installation of MS Windows Server 2008 on VMware Workstation
Type of Installation
Where to Install
1004/20/09
We are going to do a Custom (advanced) install for this VM.
Select Disk 0 (the disk you created for the VM)
Click Next
Installation of MS Windows Server 2008 on VMware Workstation
Installing Windows…
Login
1104/20/09
It will take several minutes to complete the installation
Enter a password for the Administrator account and login as Administrator.
Installation of MS Windows Server 2008 on VMware Workstation
VMware Tools
Network Settings
1204/20/09
VMware Tools installation should start automatically after you login.
Click on the “Configure networking” link.
Installation of MS Windows Server 2008 on VMware Workstation
Network Settings
Network Settings
1304/20/09
Network Settings
You should see at least one network connection.
Click on the connection and then right click. Select properties.
Select “Internet Protocol Version 4” and click the “Properties” button.
Installation of MS Windows Server 2008 on VMware Workstation
Network Settings
Activate Windows
1404/20/09
Unless you have a DHCP server you will need to enter an IP address, subnet mask and DNS server.
Your instructor will assist you while in class.
Click on the “Activate Windows” link.
Installation of MS Windows Server 2008 on VMware Workstation
Activate Windows
Activating Windows
1504/20/09
You will be prompted to enter the product key that came with your OS.
It should only take a few seconds to activate.
Installation of MS Windows Server 2008 on VMware Workstation
Optional Configurations
Install Disk (ISO) #2
1604/20/09
Using the same method as you used to capture the first ISO, capture the ISO of disk #2.
Click OK.
Installation of MS Windows Server 2008 on VMware Workstation
Install Disk (ISO) #2
Install Disk (ISO) #2
1704/20/09
Click Next
Click Finish
Installation of MS Windows Server 2008 on VMware Workstation
Optional Configuration
1804/20/09
It’s a good idea to copy the CMPNENTS folder on disk #2 to the C:\ drive; you may need it later.
When you are done with ISO #2, make sure to go back and select the “Use physical drive” radial button in the CD-ROM settings.
Installation of MS Windows Server 2008 on VMware Workstation
Optional Installs:
Adobe Acrobat Reader
http ://www.adobe.com/products/acrobat/readstep2.html
Microsoft Word 2003 Viewer
http ://www.microsoft.com/downloads/details.aspx?FamilyId=95E24C87-8732- 48D5-8689-AB826E7B8FDF&displaylang=en
1904/20/09