Vibrating

16
7/16/2019 Vibrating http://slidepdf.com/reader/full/vibrating-5634f906683e7 1/16 Nordberg Vibrating Equipment European Region           

Transcript of Vibrating

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 1/16

Nordberg Vibrating Equipment

European Region

   

  g  q

  p

 

 

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 2/16

2

In addition to being a provider of crushing and complete

rock and mineral processing solutions, Metso Minerals has

also gained a worldwide reputation as a specialist in

vibrating equipment. This is demonstrated by thousands of 

installations worldwide where our screens, feeders and

scalpers operate in the most demanding applications, from

complete multi-stage plants to highly mobile installations.

All of these installations benefit from Metso Minerals’

superior know-how and years of field experience.

A history of qualityIn 2001, Metso Minerals became an even stronger player in

the manufacture of vibrating equipment through the

merger of Nordberg and Svedala. Metso Minerals now offers

more than 300 years of collective experience in vibrating

equipment.

Whatever your process requirements,Metso Minerals has the

right solution - from sturdy feeders and scalpers to efficient

inclined or horizontal classifying screens. Just name your

application, and Metso Minerals’ professionals will find the

most productive and cost-effective vibrating equipment for

you.

 The new, comprehensive Metso Minerals vibrating

equipment team is now at your service.

Over 300 years of vibrating equipment expertise

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 3/16

Contents

3

Nordberg B-Series Feeders 4

Nordberg Scalper Series Screens 5

Nordberg TK-Series Feeders 6

Nordberg Primary Series Screens 7

Nordberg Secondary Series Screens 8

Nordberg Ellivar Series Screens 9

Nordberg DF-Series Free Fall Screens 10

Nordberg De-watering Series Screens 11

Nordberg TS-Series Screens 12

Nordberg MS-Series Screens 13

Nordberg FS-Series Screens 14

Nordberg TY-Hummer Series Screens 15

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 4/16

4

Nordberg B-Series Feeders

B10-42-2VB10-52-2V

B13-44-2V

B13-50-3V

B13-56-2V

B16-50-3V

400

500

1012 x 4240 15/22 3800 450-12001012 x 5190 15/22 4500 450-1200

1306 x 4390 22 5200 450-990

1294 x 5200 22 8300 450-1000

1306 x 5640 22 6200 450-900

1612 x 5200 37 9000 450-900

B16-56-2V

B20-60-2V

600

700

1616 x 5790 37 11400 450-900

B20-66-2V 2030 x 6575 55/75 17000 450-900

2040 x 6000 55 15000 450-800

RANGESERIALWidth x Length

(mm)

Power

(kW)

Weight

(kg)

Speed

(rpm)

Nordberg B-Series Feeders are engineered particularly for continuous

operation in hard and abrasive material applications. The feeder design

features robust frame construction, high feeding capacity and compact

overall height that makes the B-Series Feeder an ideal solution for use in a

restricted space, as well as fixed and mobile plants.The B-Series Feeders are

built using modern material technology and the latest engineering

techniques, such as finite element analysis. As a result, high reliability and

long feeder component life in even the most demanding applications is

guaranteed.

 The Nordberg B-Series Feeders utilise the B-Series mechanism, consisting of 

two geared eccentric shafts to create a linear motion.

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 5/16

100

200

Nordberg Scalper Series Screens

5

AP1032

AP1040

1000 x 3200 15 4000 800 - 900

1000 x 4000 15 4400 800 - 900

AP1242

AP1250

1200 x 4200 22 6300 800 - 900

1200 x 5000 22 7500 800 - 900

CSB1328

H1R1430

1300 x 2800 9 4200 800 - 900

1400 x 3000 2 x 11 5600 1000

CSB1528

EDB1539

1500 x 2800 11 5000 800 - 900

1500 x 3900 2 x 11 9860 800 - 900

H1R1640

AP1650

1600 x 4000 2 x 15 9500 1000

1600 x 5000 2 x 22 9200 800 - 900

H1R1650

H1R1840

1600 x 5000 2 x 22 11000 1000

1800 x 4000 2 x 18.5 10500 1000

EDB1844

H1R2040300

1800 x 4400 2 x 22 14000 800 - 900

2000 x 4000 2 x 18.5 11500 1000

RANGESERIALWidth x Length

(mm)

Power

(kW)

Weight

(kg)

Speed

(rpm)

Nordberg Scalper Series Screens are used to separate raw materials into two

or three fractions before the primary crushing stage. This scalper series

comprises four different machines,EDB, CSB, H1R and AP.

Mechanisms:

CSB: One cylindrical shaft with external counterweights for circular motion.

Grease lubricated.

EDB: Two counter rotating cardan shafts with external counterweights self-

synchronized for linear motion. Oil/ Grease lubricated.

H1R:  Two counter rotating eccentric shafts self-synchronized for linear

motion. Oil lubricated.

AP: Two counter rotating unbalanced vibratory motors for linear motion.

Grease lubricated.

 The common characteristics of these scalpers are grizzly sections for

efficient separation of raw materials,rigid feeder frame construction for high

reliability and robust steel isolation springs to effectively dampen the

dynamic loads.

EDB H1R

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 6/16

13009605.610081607TK10-15S

TK10-15-2V

16009605.613301926TK13-20S

TK13-20-3V

18009605.616321800TK16-20S

TK16-20-3V

67014402.510161660TK10-15

75014402.510162230TK10-20

TK8-27-2V

TK8-32-2V

TK11-42-2V

Weight (kg)

140014404.57882855

RANGE

17009605.67903205

28009609.411724370

6

Nordberg TK-Series Feeders

Nordberg TK-Series Feeders are available with a solid pan, screen mesh or

grizzly bars.The TK-Series has been designed to be compact in size, light in

weight, yet well suited to hard rock applications. The TK-Series vibrating

feeders utilise grease lubricated unbalanced vibratory motors to create a

linear motion.

 TK-Series vibrating feeders can be used for feeding, transporting, scalping

and screening of materials.

Most of the TK-Series vibrating feeders are available with either squirrel-

cage motors or hydraulic drives.

Speed

(rpm)Power (kW)

Power (kW)

Width (mm)Length (mm)

Weight (kg)RANGESpeed

(rpm)Width (mm)Length (mm)

Feeder Feed chute

Feeder grizzly applications

Chutes: closed bottom, rod or screens clothes applications

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 7/16

7

Nordberg Primary Series Screens

(XH) 3048 X 6096 2 x 30 18800 755

(XH) 1219 X 3048 7.5 7.5 3080 5000 755100

(XH) 1219 X 2438 5.5 7.5

SERIALWidth x Length

(mm)

Power (kW)

1 deck 2 decks 3 decks

2720 3000

Weight (kg)

1 deck 2 decks 3 decks

755

200

(XH) 1524 X 3048 7.5 11 3300 3900 755

(XH) 1219 X 3658 7.5 11 15 3400 4030 5300 755

(XH) 1524 X 4267 11 11 15 4000 4620 6700 755(XH) 1524 X 3658 11 11 15 3800 4320 6200 755

300

(XH) 1828 X 3658 11 22 22 4200 4620 6400 755

(XH) 1524 X 4877 11 15 15 4400 5800 7250 755

(XH) 1828 X 4877 15 22 22 5200 6200 8600 755

(XH) 1828 X 4267 11 22 22 4300 5600 7300 755

(XH) 2134 X 4877 30 30 2 x 17 8400 9000 12600 755

(XH) 1828 X 6096 30 2 x 17 8600 12500 755

400

(XH) 2438 X 4877 30 30 2 x 17 8600 9100 13250 755

(XH) 2134 X 6096 30 30 2 x 17 9300 11200 14200 755

(XH) 2438 X 7316 2 x 30 2 x 30 16000 18700 755

(XH) 2438 X 6096 30 2 x 17 2 x 17 9800 12500 17150 755

Speed

(rpm)

CVB1540

CVB1845

CVB2050

CVB2060

200

300

1500 X 4000 11 -1 5 4100 4800 MV2

1800 X 4500 15 - 22 5500 6800MV2 for CVB 1845-2PMV3 for CVB 1845-3P

2000 X 5000 22 6200 7500 MV3

2000 X 6000 22 7500 9300 MV3

RANGESERIAL Width x Length(mm) Power(kW) Weight (kg)2 decks 3 decks MV Vibrationsize

800 - 1000

800 - 1000

800 - 1000

800 - 1000

Speed(rpm)

Nordberg CVB-P and Ripl-Flo XH series screens are heavy-duty inclined primary screens well suited to aggregate

and mining applications. The screen designs incorporate huck-bolted construction to improve load-carrying

capacity and minimise the risk of fatigue loading. The top deck support frame is designed to take either perforated

plate or bolted rubber panels.

 The Nordberg CVB-P screen range utilises grease lubricated MV mechanisms, consisting of rotating external

counterweights linked via cardan shaft. The Nordberg Ripl-Flo screen range utilises the oil lubricated Ripl-Flo

mechanism, consisting of a rotating eccentric shaft with additional external counterweight plates. Both the MV

and Ripl-Flo mechanisms are used to create a circular screening motion.

 This screen series is available in 1, 2, 3 or 4 decks with many additional options available.

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 8/16

8

Nordberg Secondary Series Screens

Nordberg Secondary Series Screens consist of the KS and CVB range. These screens can be used in a variety of 

secondary sizing applications. Both the KS and CVB screen range can be used for either dry or wet screening.

However,the KS screens are predominantly used in wet screening applications.

KS and CVB screens are circular motion inclined screens. The CVB screen range utilises grease lubricated MV

mechanisms consisting of rotating external counterweights linked via cardan shaft. The KS screen range utilise an

oil lubricated mechanism, consisting of an eccentric shaft with additional external counterweights.

Available in 1, 2, 3 or 4 deck configurations depending on the size, with many additional options available: dust

enclosure, washing system, ball deck,modular panels and more.

SERIALLength x Width

(mm)

Power (kW)

1 deck 2 decks 3 decks

Weight (kg)

1 deck 2 decks 3 decks

100 (KS) 3000 x 1400 5.5 7.5 1400 2150(KS) 3000 x 1200 5.5 7.5 1300 2050 825-1500

825-1500

(KS) 3000 x 1600 5.5 7.5 1500 2300 825-1500

(KS) 4000 x 1800 7.5 11 2500 3600 825-1500

(KS) 4000 x 1600 7.5 11 15 2200 3000 5000 825-1500

(KS) 5000 x 1400 11 11 2700 3700200 825-1240

(KS) 5000 x 1800 11 18.5 22 3200 5300 6300 825-1240

(KS) 5000 x 2000 15 18.5 22 3400 5900 6700 825-1240

(KS) 6000 x 1800 15 18.5 30 4200 5400 8110 825-1030

(KS) 6000 x 2250 18.5 30 37 5200 8000 11500300 825-1030

(KS) 6000 x 2500 18.5 37 37 5600 10000 12500 825-1030

400(KS) 7000 x 2000 22 30 5800 8000 825-1030

(KS) 7000 x 2500 22 37 7000 11000 825-1030

Speed

(rpm)

CVB1540

CVB1845

CVB2050

CVB2060

200

300

1500 X 4000 11 -1 5 4100 4800 5560 MV2

1800 X 4500 15 - 22 5500 6800 7800MV2

MV3 for CVB 1845-4

2000 X 5000 22 6200 7500 8800MV3

MV2 for CVB 2050-2

2000 X 6000 22 7500 9300 10800MV3

MV4 for CVB 2060-4

RANGESERIALWidth x Length

(mm)

Power

(kW)

Weight (kg)

2 decks 3 decks 4 decks

MV Vibration

size

800 - 1000

800 - 1000

800 - 1000

800 - 1000

Speed

(rpm)

KSCVB

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 9/16

9

Nordberg Ellivar Series Screens

Nordberg Ellivar Series Screens are large inclined screens capable of 

handling high tonnages at high efficiency,especially at fine cut points (final

sizing). This is due to their elliptical motion, which guarantees high

screening efficiency by moving the material rapidly at the feed end and

slowly at the discharge end. Optimum screening is also achieved by the

adjustable flow/ counter-flow, amplitude and speed range characteristics.

Ellivar Series Screens utilise grease lubricated MV mechanisms consisting of 

rotating external counterweights linked via cardan shaft. The MV

mechanisms are mounted above the center of gravity to create an elliptical

screening motion.

Ellivar 13

Ellivar 16

Ellivar 20

300

400

500

2200 x 610010 400 11 100 12 300 - -

9802 x 15

2 x 11

- - - - 14 700

2630 x 61002 x 11 13 500 14 600 - - -

2 x 15 - - 16 100 17 600 -980

2630 x 7625 2 x 15 15 400 16 400 - 21 300 - 980

RANGESERIALWidth x Length

(mm)

Power

(kW)

Weight (kg)

2 decks 2 decks 1/2 3 decks 3 decks 1/2 4 decks

Speed

(rpm)

MV3

MV4

MV3

MV4

MV4

MV Vibration size

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 10/16

10

3 - Rubber on top deck 

Nordberg DF-Series Screens

Nordberg Duo-Flo Series Screens are suited to the processing of primary or

secondary feed material that does not require high accuracy screening. It is

outstanding for scalping natural material, screening in closed circuit with a

crusher, and for screening gravel, where the feed material contains a high

percentage of fines.

 The Duo-Flo Series is available in a range of sizes. Each screen deck has 2

different sloping sections.The first section has a steep slope angle resulting

in high material travel rates with low bed depths and rapid fines removal.

 The second section has a lower slope angle to decrease material travel rate

to improve near-size material screening.

 The upper deck is usually used as a relief deck using large apertures and

creates a vertical flow of material to the underlying deck.

 The Duo-Flo Series Screens utilise grease lubricated unbalanced vibratory

motors to create a linear motion.

DF 1210 S

DF 1210 P

100

1200 x 1000 2 x 1.9 1000 1000

1200 x 1000 2 x 3.0 1300 1000

DF 2012 S

DF 2012 P

2000 x 1200 2 x 3.0 1750 1000

DF 2016 P 2000 x 1600 2 x 9.8 4500 1000

2000 x 1200 2 x 8.0 2700 1000

RANGESERIALLength x Width

(mm)

2 - Wire on top deck 

3 - Wire on top deck 

3 - Rubber on top deck 

DF 2018 S 2000 x 1800 2 x 8.5 3400 10003 - Wire on top deck 

3 - Rubber on top deck 

N° of decksPower

(kW)

Weight

(kg)

Speed

(rpm)

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 11/16

11

Nordberg De-watering Series Screens

Nordberg H-Series Screens are specifcally designed for de-watering and

washing applications.They are available in 1 or 2 deck configurations. The

single deck configuration can be setup with an uphill inclined screen deck 

and de-watering back wall specifically for de-watering applications.The two

deck configuration can utilise the top deck as a relief or sizing deck with the

bottom deck used for de-watering or sizing.

 The H-series screens utilise an oil lubricated mechanism, consisting of two

self-synchronizing eccentric shafts with additional external counterweights

to create a linear screening motion. A 40° stroke angle is used to achieve

effective de-watering at high capacities.

A washing system can be introduced as an option if necessary.

100022002 x 416002 x 4H 3000 x 1000

100028002 x 5.520002 x 4H 3000 x 1400

100033002 x 7.524002 x 5.5H 4000 x 1400

100041002 x 1127002 x 5.5H 4000 x 1800

100036502 x 1125002 x 5.5H 4000 x 1600

100047002 x 1130002 x 7.5H 4000 x 2000

100046002 x 1134002 x 7.5H 5000 x 1400

100059502 x 1149002 x 11H 5000 x 1800

100063002 x 1553002 x 11H 5000 x 2000

100083502 x 1561002 x 15H 6000 x 2000

1000108002 x 2278002 x 18.5H 6000 x 2500

100

200

300

400

Speed

(rpm)Weight (kg)Power (kW)Weight (kg)Power (kW)

DOUBLE DECKSINGLE DECKRANGESERIAL

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 12/16

12

Nordberg TS-Series Screens

 The TS-Screen Series is designed to be modular and robust with exceptional

performance in a very wide range of screening applications.The decks have

three different slopes,with the slope angles reducing towards the discharge

end.

On the first section the steep slope creates high material travel rates,which

enable rapid fines removal. On the second section the slope and the

material travel rate reduce, and the deck is similar to conventional inclined

screening. In the third section the slope reduces further, increasing the

material retention time on the screening surface to improve the removal of 

near-sized particles. The overall combination of the 3 different slope

sections and the elliptical screening motion result in high capacity and high

efficiency screening.

 TS Series Screens utilise grease lubricated MV mechanisms consisting of 

rotating external counterweights linked via cardan shaft. The MV

mechanisms are mounted above the center of gravity to create an elliptical

screening motion.

TS202

TS203200 1530 x 5000 15

4800800/1000

6100

TS302

TS303300 1835 x 6100

15 6200800/1000

22 8200

TS402

TS403400 2445 x 6100

22 8400800/1000

30 11200

TS502

TS503500 2445 x 8200

30 11200-

2 x 22 15000

RANGESERIALWidth x Length

(mm)

Power

(kW)

Weight

(kg)MV2

-

MV2 for TS302

MV3 for TS303

MV3 for TS402

MV4 for TS403

MV4 for TS502

MV3 (4) for TS503

MV Vibration sizeSpeed

(rpm)

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 13/16

13

Nordberg MS-Series Screens

RANGESERIALWidth x Length

(mm)Power(kW)

Weight (kg)Speed(rpm)

MS 08 X 21 SD

MS 08 X 21 DD

MV Vibration size

4 x MV3

4 x MV4400 2400 x 6400

45 11493

55 17193850/950

MS 08 X 24 SD

MS 08 X 24 DD

4 x MV3

4 x MV4450 2400 x 7300

45 13119

55 19186850/950

MS 10 X 21 SD

MS 10 X 21 DD

4 x MV3

4 x MV4550 3100 x 6400

45 13673

55 20366850/950

MS 10 X 24 SD

MS 10 X 24 DD

4 x MV3

4 x MV4580 3100 x 7300

45 14456

55 21427850/950

MS 12 X 24 SD

MS 12 X 24 DD

4 x MV4

4 x MV4700 3600 x 7300

55 16959

55 23501850/950

MS 12 X 27 SD

MS 12 X 27 DD

4 x MV4

4 x MV4750 3600 x 8200

55 17895

55 25460850/950

Nordberg “Banana style” Multi-Slope Screens can be used in primary,

secondary and tertiary applications in both the mining and aggregate

industry.The MS-Series Screens are available in both single and double deck 

configurations. The screen decks feature multiple slope sections where the

slope angle reduces progressively towards the discharge end. The steeper

slopes towards the feed end result in high material travel rates with low bed

depths and rapid fines removal. The lower slope angles towards the

discharge end result in reduced material travel rates and high efficiency

screening of near-sized particles. These characteristics enable the multi-

slope screens to handle large throughputs at high efficiency. Multi-Slope

Screens can be economically installed and require less space than

conventional screens of a comparable capacity.

 The Multi-Slope Screens utilise grease lubricated MV mechanisms,consisting of rotating external counterweights linked via cardan shaft. Two

counter rotating MV shaft lines create a linear screening motion with a 45°

stroke angle.

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 14/16

14

Nordberg FS-Series Screens

Nordberg FS-Series Screens are designed to be both modular and robust

with exceptional performance in a wide range of applications. The FS series

was designed specifically for mobile plant applications.The construction is

modular with most components being huck-bolted: the screen media

support rails, cross members,feedbox,etc., can be individually replaced.

 The FS-Series utilises a triple shaftline MV mechanism configuration.The MV

mechanisms consist of rotating external counterweights linked via cardan

shaft. Each MV shaftline is geared together to produce an elliptical motion

with a 45° stroke angle. The angle, size and shape of the elliptical stroke

pattern can be easily adjusted.The stroke length can be as long as 3/4“ or 20

mm. FS-Series Screens operate at high “G-forces” to keep screen media

apertures clear and provide accurate sizing at high feed rates.

FS ScreensSERIAL Size (mm) Decks Motor (kW)Area (m2)MV vibration

size

FS 203 1500 x 4900 3 227.4 6 x MV2 7515FS 252 1800 x 4900 2 228.8 6 x MV2 6440

FS 253 1800 x 4900 3 308.8 6 x MV3 7664

FS 302 1800 x 6100 2 3011 6 x MV2 7193

FS 303300

1800 x 6100 3 3711 6 x MV2 8571

FS 352 2100 x 6100 2 3712.8 6 x MV2 8984

FS 353 2100 x 6100 3 4512.8 6 x MV3 11927

FS 402400

2400 x 6100 2 3714.6 6 x MV2 9229

FS 403 2400 x 6100 3 4514.6 6 x MV3 12218

Estimated shippingweight (kg)

200

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 15/16

Nordberg TY-Hummer Series Screens

 TY-Hummer Series Screens are specifically designed for fine dry screening.

 The Hummer Screen design uses gravitational and vibrational forces to

produce high material travel rates, which maximise particle separation.

Concurrently, the sharp, high frequency linear motion rapidly stratifies the

material and speeds the separation process.

Hummer Screens are a unique design that utilises grease lubricated

vibratory motors which vibrate the screen media whilst the screen body

remains stationary.

RANGESERIALWidth x Length

(mm)

Power

(kW)

Weight (kg)

1 deck 2 decks 3 decks

Speed

(rpm)

TY 305

100

914 x 1524 0.5 916 1052 1424 1800/3600

TY 310 914 x 3048 1 1442 1926 2418 1800/3600

TY 315 914 x 4572 1 1994 2690 3572 1800/3600

TY 405 1219 x 1524 0.5 1066 1384 1710 1800/3600

TY 410 1219 x 3048 1 1656 2141 2556 1800/3600

TY 415 1219 x 4572 1 2398 3014 3652 1800/3600

TY 420200 1219 x 6096 2 3007 4013 4559 1800/3600

15

7/16/2019 Vibrating

http://slidepdf.com/reader/full/vibrating-5634f906683e7 16/16

li ki i i TM

Metso Minerals North and Central America3073 South Chase AvenueMilwaukee,WI 53207

USAPhone: +1 414 769 4300Fax: +1 414 769 4730

Metso Minerals South AmericaCaixa Postal 27218035-240 SorocabaBrazilPhone: +55 152 191 300Fax: +55 152 191 695

Metso Minerals Asia-PacificP.O. Box 399West Perth,WA 6872AustraliaPhone: +61 8 9420 5555Fax: +61 8 9320 2500

Metso Minerals North and Central EuropeP.O. Box 400420311 MalmöSwedenPhone: +46 40 24 58 00Fax: +46 40 24 58 78

Metso Minerals South Europe andMediterranean41 rue de la République71000 MâconFrancePhone: +33 3 85 39 62 00Fax: +33 3 8539 6349

Metso Minerals Southern Africa

Wordsworth Office Park 41 Wordworth Avenue, SenderwoodJohannesburg 2007South AfricaPhone: +27 11 723 2000Fax: +27 11 723 2080

Metso MineralsP.O. Box 30733101 TampereFinlandPhone: +358 20 484 140Fax: +358 20 484 141

www.metsominerals.comE-mail: [email protected]