VF-2TR Machine Views A - Haas AutomationVF-2TR_Machine Views_A.cdr Author: Ben Hester Created Date:...
1
89" (2261 mm) Min. 107" (2718 mm) 0 47" (1194 mm) Minimum, Location of the First Hole 3.7" (94 mm) 29.3" (744 mm) Base Casting Front Coolant Tank 55 Gallon *Coolant Tank Dimensions 55 Gallon (208.2L): 84.4" (2143 mm) X 27.5" (699 mm) 26.5" (673 mm) 55.5" (1410 mm) 74.25" (1886 mm) 53.4" (1356 mm) 122" (3099 mm) 27.9" (709 mm) Door Open 143" (3632 mm) 107" (2718 mm) 36" (914 mm) 89" (2261 mm) 105" (2667 mm) 98" (2489 mm) 122" (3099 mm) Max. 33" (838 mm) 10.5" (267 mm) 16.5" (419 mm) 1.12" (28 mm) 44.62" (1133 mm) 3 22.42" (569 mm) 3 RECOMMENDED TOOL CHANGE POSITION &16.5" PART SWING SEE WARNING 1.62" (41 mm) 42.12" (1070 mm) 3 10.5" (267 mm) 10.5" (267 mm) 36" (914 mm) DOOR OPENING 87" (2210 mm) ENCLOSURE USEABLE WORK SPACE MILL TABLE (AT HOME POSITION) SIZE: 36" x 14" (914 mm x 356 mm) TRAVEL: 30" x 16" (762 mm x 406 mm) PART SWING CLEARANCE IS REDUCED TO 16.5" WHEN TABLE IS IN BACK POSITION. TABLE SHOULD BE AT FAR RIGHT AND FRONT POSITION DURING TOOL CHANGE. WARNING NOTES: 1. TABLE POSITION(S) AT MAX X & Y TRAVELS. 2. MEASUREMENTS ARE FROM THE EDGE OF MILL TABLE TO NEAREST OBSTRUCTION (i.e. ENCLOSURE, WAY COVER, DOORS, ETC.). 3. DIMENSIONS ARE REDUCED AS HEIGHT ABOVE TABLE INCREASES; i.e. FRONT OF ENCLOSURE IS SLOPED 5 INWARD FROM BOTTOM TO TOP. DIMENSIONS SHOWN ARE AT TABLE TOP HEIGHT. 20" (508 mm) MAX Z-AXIS TRAVEL END OF Z-AXIS TRAVEL 16" (406 mm) 4" (102 mm) TOOL CHANGE SWING ARM POSITION DURING TOOL CHANGE 10.5" (267 mm) 13.63" (346 mm) 9.38" (238 mm) B-AXIS PLATTER HEIGHT MILL TABLE (AT HOME POSITION) SIZE: 36" X 14" (914 mm x 356 mm) TRAVEL: 30" x 16" (762 mm x 406 mm) 10.5" (267 mm) 87" (2210 mm) ENCLOSURE USEABLE WORK SPACE DETAIL A SCALE 1:10 SPINDLE CARTRIDGE 5.2" (132 mm) DISTANCE BETWEEN CARTRIDGE AND TABLE AT MAX. X-AXIS TRAVEL IS 0.40" (10 mm) 10.25" (260 mm) 8.75" (222 mm) TR160 21.26" (540 mm) 8.18" (208 mm) 14.19" (360 mm) 6.01" (153 mm) &1.5" x 4.79" DEEP (38 mm x 122 mm) &17.5" (445 mm) PART SWING &14.4" (366 mm) PART SWING AT 90° A 0.125" (3 mm) A-AXIS PLATTER CLEARANCE 9.38" (238 mm) B-AXIS PLATTER HEIGHT 31" (787 mm) 39.11" (993 mm) &14.52" (369 mm) A-AXIS SWING CLEARANCE 13.63" (346 mm) 7" (178 mm) 9.5" (241 mm) A-AXIS CL 20.36" (517 mm) 29.80" (757 mm) 0.68" (17 mm) 0.53" (13 mm) SLOT DETAIL A SCALE 1:2 33" (838 mm) VF 2 VF 2 *Due to continual product improvements, machine dimensions are subject to change without notice.
Transcript of VF-2TR Machine Views A - Haas AutomationVF-2TR_Machine Views_A.cdr Author: Ben Hester Created Date:...
-
89"(2261 mm)
Min. 107"(2718 mm)
0
47" (1194 mm)Minimum, Location
of the First Hole 3.7"(94 mm)
29.3"(744 mm)
BaseCasting
Front
Coolant Tank55 Gallon
*Coolant Tank Dimensions55 Gallon (208.2L): 84.4" (2143 mm) X 27.5" (699 mm)
26.5"(673 mm)
55.5"(1410 mm)
74.25"(1886 mm)
53.4"(1356 mm)
122" (3099 mm)
27.9"(709 mm)
DoorOpen
143"(3632 mm)
107"(2718 mm)
36"(914 mm)
89"(2261 mm)
105"(2667 mm)
98"(2489 mm)
122" (3099 mm) Max.
33" (838 mm)10.5"
(267 mm)
16.5"(419 mm)
1.12"(28 mm)
44.62"(1133 mm)
3
22.42"(569 mm)
3
RECOMMENDED TOOL CHANGE POSITION
&16.5"PART SWINGSEE WARNING
1.62" (41 mm)
42.12"(1070 mm)
3
10.5"(267 mm)
10.5"(267 mm)
36" (914 mm)DOOR OPENING
87" (2210 mm)ENCLOSURE USEABLE WORK SPACE
MILL TABLE (AT HOME POSITION)SIZE: 36" x 14" (914 mm x 356 mm)TRAVEL: 30" x 16" (762 mm x 406 mm)
PART SWING CLEARANCE IS REDUCED TO 16.5"WHEN TABLE IS IN BACK POSITION.
TABLE SHOULD BE AT FAR RIGHT AND FRONTPOSITION DURING TOOL CHANGE.
WARNING
NOTES:1. TABLE POSITION(S) AT MAX X & Y TRAVELS.2. MEASUREMENTS ARE FROM THE EDGE OF MILL TABLE TO NEAREST
OBSTRUCTION (i.e. ENCLOSURE, WAY COVER, DOORS, ETC.).3. DIMENSIONS ARE REDUCED AS HEIGHT ABOVE TABLE INCREASES;
i.e. FRONT OF ENCLOSURE IS SLOPED 5 INWARD FROM BOTTOM TO TOP.DIMENSIONS SHOWN ARE AT TABLE TOP HEIGHT.
20"(508 mm)
MAX Z-AXIS TRAVEL
END OFZ-AXIS
TRAVEL16"
(406 mm)
4" (102 mm)
TOOL CHANGE SWING ARM POSITIONDURING TOOL CHANGE
10.5"(267 mm)
13.63"(346 mm) 9.38"
(238 mm)
B-AXISPLATTERHEIGHT
MILL TABLE (AT HOME POSITION)SIZE: 36" X 14" (914 mm x 356 mm)TRAVEL: 30" x 16" (762 mm x 406 mm)
10.5"(267 mm)
87" (2210 mm)
ENCLOSURE USEABLE WORK SPACE
DETAIL ASCALE 1:10
SPINDLE CARTRIDGE 5.2" (132 mm)
DISTANCE BETWEEN CARTRIDGEAND TABLE AT MAX. X-AXISTRAVEL IS 0.40" (10 mm)
10.25"(260 mm)
8.75"(222 mm)
TR160
21.26" (540 mm)
8.18"(208 mm)
14.19"(360 mm)
6.01"(153 mm)
&1.5" x 4.79" DEEP(38 mm x 122 mm)
&17.5" (445 mm) PART SWING
&14.4" (366 mm) PART SWING AT 90°
A
0.125"(3 mm)
A-AXIS PLATTERCLEARANCE
9.38"(238 mm)B-AXIS
PLATTER HEIGHT
31" (787 mm)
39.11" (993 mm)
&14.52" (369 mm)A-AXIS SWINGCLEARANCE
13.63"(346 mm)
7"(178 mm)
9.5"(241 mm)
A-AXIS CL
20.36" (517 mm)
29.80" (757 mm)
0.68"(17 mm)
0.53"(13 mm)
SLOT DETAIL ASCALE 1:2
33"(838 mm)
VFVF
2
VFVF
2
*Due to continual product improvements, machine dimensions are subject to change without notice.
Page 1
