Verti-Block by Can Ridge Industries
-
Upload
alexandra-white -
Category
Engineering
-
view
43 -
download
2
Transcript of Verti-Block by Can Ridge Industries
Verti-BlockTM Precast Retaining Walls
Verti-Crete Licensees
Verti-Block Philosophy• Wet Cast for
durability and texture• Big Block for strength
and convenience• Open Core for
drainage and lower material and transportation costs• Interlocking plus
gravel infill for shear strength• Segmental Design for
differential settlement
RIGHT Look RIGHT Strength RIGHT Size
RIGHT Look: Texture
• 5” Depth of Relief• Real Stone Textures• Multiple Faces in Each
Texture
• Poured Face Down• Retractable Tapered Core• Externally Vibrated
The Verti-Block Mold
Canyon Ledge Texture
RIGHT Strength: Gravity Wall
14’ High Verti-Block Gravity Wall
Standard 36” Block Size• Up to 14’ tall Gravity Wall• Less Excavation• Faster Installation
Gravity Wall: Mass ExtenderVerti-Block w/ Mass Extenders
• Less Excavation• Up to 24’ Tall
48” Block60” Block
Verti-Block Mass Extender
• Improves Stability• Taller Gravity Walls
Reinforced Verti-Block WallVerti-Block with Tie-Backs
• Mechanically Stabilize the Earth with geo-grid tie-backs for higher retaining projects • Tie-backs start on the bottom row and generally run 60% of the wall height• Gravel fill inside blocks only
GEOGRID: Friction Connection
• Connection between concrete surface and gravel infill
• Pullout Testing
GEOGRID: Positive Connection
• Removes reliance on friction
• No contact with concrete• Able to use in combination
with friction connection
Verti-Block’s lightweight blocks interlock and fill with gravel to ensure the right amount of setback with no over or
under excavation
RIGHT Size: Handling
The Verti-Block: Standard Block Sizes
• 1,755 lbs.• 2’ tall x 4’ wide x
3’ deep
STANDARD BLOCK
HALF BLOCK
CORNER BLOCK
• 1,068 lbs.• 2’ tall x 2’ wide x 3’ deep
• 1,595 lbs• 2’ tall x 4’ wide x 2’ deep
The Verti-Block: Top Block SizesSTANDARD TOP
BLOCK
HALF TOP BLOCK
CORNER TOP BLOCK
• 1,313 lbs.• 2’ tall x 2’ wide x 3’ deep
• 746 lbs.• 2’ tall x 2’ wide x 3’ deep
• 1,360 lbs.• 2’ tall x 4’ wide x 2’ deep
Lower Transportation Costs
• 28 Blocks per Truckload
• 224 SF per Load
• Able to handle with smaller equipment
Verti-Block DesignVerti-Block Design Features
• 9% Batter Built-in• Proper Drainage• Native Soil Backfill
• Easy Handling• Smaller Equipment
Necessary• Easier Access
Verti-Block Installation
Flexibility: Convex & Concave Curves
Verti-Block units have a built-in taper to facilitate radial turns
Flexibility: Convex & Concave CurvesVerti-Block’s unique design enables radial turns with an 16’
minimum radius
Verti-Block With Fence or RailingVERTI-BLOCK APPLICATIONS
• With Verti-Crete Fencing• Guard Rails• Less Setback• Fill open core with concrete as
footing
Adrian, Michigan
• Comstock Park River Project• Feasibility Study• Verti-Block Selected for
strength and cost• Base was a key factor
River Bank Wall Replacement
River Bank ApplicationBEFORE AFTER
River Bank Application (cont.)BEFORE AFTER
Verti-Block: Stone-FXTM Stain
Retaining Wall Failures
PROBLEM• Hydrostatic Pressure
SOLUTION• Ensure Proper Drainage
Retaining Wall Failures
Verti-Block SolutionsVERTI-BLOCK APPLICATIONS:
• GRAVITY WALLS• TERRACING• PLANTABLE RETAINING WALLS• BASE FOR FENCING OR RAILINGS• PROPERTY DIVIDERS
• Less Concrete• Lower Transportation Costs• Less Labor• Easy Installation• No Over or Under Excavation• Proper Setback• Proper Drainage
Verti-BlockTM Precast Retaining Walls