Order code: LEDJ185

UV 100W COB Flood User Manual

www.prolight.co.uk UV 100W COB Flood User Manual 2

Safety advice

WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE-FULLY BEFORE YOUR INITIAL START-UP!• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessaryfortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodificationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.

OPERATING DETERMINATIONSIfthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageandthewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS

CAUTION! TAKE CARE USING THIS EQUIPMENT!HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithothercables.Handlethepowercableandallmainsvoltageconnectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoflammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhenequipmentisnotinuseorbeforecleaning!Onlyhandlethepower-cablebytheplug.Neverpullouttheplugbypullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageisbetween110~240VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedordamaged.Checktheequipmentandthepowercableperiodically.

• Iftheequipmentisdroppedordamaged,disconnectthemainspowersupplyimmediatelyandhaveaqualifiedengineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastictemperaturefluctuation(e.g.aftertransportation),donotconnectpowerorswitchitonimmediately.Thearisingcondensationmightdamagetheequipment.Leavetheequipmentswitchedoffuntilithasreachedroomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuseimmediately.Packtheunitsecurely(preferablyintheoriginalpackingmaterial),andreturnittoyourProLightdealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybecarriedoutbyaqualifiedtechnician.THISUNITCONTAINSNOUSERSERVICEABLEPARTS.

• Thislightingfixtureisforprofessionaluseonly-itisnotdesignedfororsuitableforhouseholduse.Theproductmustbeinstalledbyaqualifiedtechnicianinaccordancewithlocalterritoryregulations.Thesafetyoftheinstallationistheresponsibilityoftheinstaller.Thefixturepresentsrisksofsevereinjuryordeathduetofirehazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingtoEN62471.Donotviewthelightoutputwithopticalinstrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk UV 100W COB Flood User Manual 3

Product overview & technical specifications

FeaturingCOB(chip-on-board)technologytheLEDJUV100WCOBFlood isloadedwitha100WUVLEDwhichishousedina50°reflector.Controloftheunitisfacilitatedviaa4buttonmenuandLCDdisplay.Thewholefixtureisenclosedinarobustcastaluminiumhousing.

Please note:TheCOBUVLEDinstalledintothisfixturehasdispersedLEDemitters,youmaynoticethatnotallpixelswillilluminate.ThisistoenablebettercoolingacrossthechipanddoesnotindicateafaultyLED.

•1x100WUVCOBLED•Beamangle:50°(fieldangle:80°)•1.1kHzrefreshrate•DMXchannels:1or2selectable•Standalone,soundactiveandmaster/slavemodes•0-100%dimmingwithvariablestrobe•4pushbuttonmenuwithLEDdisplay•Captivepowerconnection•3-pinXLRin/outsockets•Fancooled•Suppliedwithhangingbracketandfilterframe•Optional10°(ELUM102)or25°(ELUM103)lenses•OptionalBarnDoors(ELUM041C)

UV 100W COB Flood

Specifications UV 100W COB Flood

Powerconsumption 110W

Powersupply 110~240V,50/60Hz

Fuse F2A250V

Dimensions 303x300x180mm

Weight 3.7kg

Ordercode LEDJ185

01-Safetyeye

02-Earthpoint

03-LEDdisplay

04-Functionbuttons

05-DMXinputsocket

06-DMXoutputsocket

07-Captivepowerconnection

08-FuseF2A250V

Inthebox:1 x fixture, & 1 x user manual

300mm

280mm

07

01

03

04

02

08 05 06

www.prolight.co.uk

FUSE: F2A 250V

SAFETY EYE

DMXIN

DMXOUT

PUSH

MENU UPENTER DOWN

POWER SUPPLY: 100-240V~50/60Hz

COB FLOODUV 100W

www.prolight.co.uk UV 100W COB Flood User Manual 4

Operating instructions

DMX channel mode:

ToaccesstheDMXchannelmode,pressthe“MODE”buttonontherearoftheunittoshowA001ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthedesiredDMXaddress.Nowpressthe“ENTER”buttontochooseoneofthe1or2DMXchannelmodesusingthe“UP”and“DOWN”buttons,andpressthe“ENTER”usethe“UP”and“DOWN”buttonstosetwhattheunitshoulddoifitlosesDMXsignal.

bLC-TheunitwillblackoutifDMXsignalislost.

Soun-TheunitwillgointosoundactivemodeifDMXsignalislost.

HoLd-TheunitwillholdthelastDMXcommandifDMXsignalislost.

Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

Static mode:

Toaccessstaticmodepress“ENTER”untilthedisplayshowsC-00ontheLEDdisplay.Toadjustthebrightnessusethe“UP”and“DOWN”buttonstoselectbetweenC-00~C-99.Pressthe“ENTER”buttontoconfirmthesetting.Nowusethe“UP”and“DOWN”buttonstoadjusttheflashspeedbyselectingbetweenF-00~F-99.Pressthe“ENTER”buttontoconfirmthesetting.Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

Slave mode:

Pressthe“MODE”buttonontherearoftheunittoshowSLAUontheLEDdisplayandpressthe“ENTER”buttontoconfirmthesetting.Theunitwillnowruninsequencewiththemasterunit.

Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Sound active mode:

Toaccessthesoundactivemode,pressthe“MODE”buttonontherearoftheunittoshowSU00ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthesoundsensitivitylevelfromSU.00~SU.99andpressthe“ENTER”buttontoconfirmthesetting.

Value: 00 - 99 (00 = low, 99 = high) Toexitoutofanyoftheaboveoptions,pressthe“MODE”button.

Channel Value Function

1 000-255 Masterdimmer(0-100%)

Channel Value Function

1 000-255 Masterdimmer(0-100%)

2 000-255 Flashspeed(slowtofast)

1 channel mode: 2 channel mode:

Staticmode C-00~C-99Brightness(0-100%)F-00~F-99Flashspeed(slow-fast)

Slavemode SLAV

Soundactivemode SU00~SU99

Menusystem

DMXmode 1CH,2CH

Addresssetting A001~A512

www.prolight.co.uk UV 100W COB Flood User Manual 5

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachfixturerequiresa“startaddress”from1-512.Afixturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannelindicatedbythestartaddress.Forexample,afixturethatoccupiesoruses7channelsofDMXandwasaddressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthechainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligentfixturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothefixture.DMXdataissentasserialdatathattravelsfromfixturetofixtureviatheDATA“IN”andDATA“OUT”XLRterminalslocatedonallDMXfixtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogetherandoperatefromasinglecontroller,aslongasallfixturesandthecontrollerareDMXcompliant.ToensureproperDMXdatatransmission,whenusingseveralDMXfixturestrytousetheshortestcablepathpossible.TheorderinwhichfixturesareconnectedinaDMXlinedoesnotinfluencetheDMXaddressing.Forexample;afixtureassignedtoaDMXaddressof1maybeplacedanywhereinaDMXline,atthebeginning,attheend,oranywhereinthemiddle.WhenafixtureisassignedaDMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisfixturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,seeimagebelow.

Also remember that DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbepurchasedfromallgoodsoundandlightingsuppliersorProLightConceptsdealers.Pleasequote:

CABL10 – 2mCABL11 – 5mCABL12 – 10m

www.prolight.co.uk UV 100W COB Flood User Manual 6

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.DonotconnectthecablesshieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRsoutercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,youmayneedtouseaterminatoronthelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease the possibilities of erratic behaviour. (3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRfixturesmaybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmissionproblemsandinterferance.itisalwaysadvisabletoconnectaDMXterminal,(resistance120Ohm1/4W)betweenpin2(DMX-)andpin3(DMX+)ofthelastfixture.

5-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C

3-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)

3-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)

5-pin XLR (socket)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C

DMX setup

www.prolight.co.uk UV 100W COB Flood User Manual 7

WEEE notice

Correct Disposal of this Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedofwithotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtotheenvironmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromothertypesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.

Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheirlocalgovernmentoffice,fordetailsofwhereandhowtheycantakethisitemforenvironmentallysaferecycling.

Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthepurchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.

www.prolight.co.uk 8UV 100W COB Flood User Manual