USING YOUR LAPTOP WITH THE SMARTBOARD...USING YOUR LAPTOP WITH THE SMARTBOARD WHAT You can use your...
5
USING YOUR LAPTOP WITH THE SMARTBOARD WHAT You can use your laptop in the classroom and connect it to the SmartBoard. HOW In this tutorial, you will learn how to connect the necessary cables to your laptop and how to send the video signal to the SmartBoard. PAGE 2: XAVIER HALL CLASSROOMS PAGE 3: BEN HALL CLASSROOMS WITH OLD CARTS PAGE 4: BEN HALL CLASSROOMS WITH NEW CARTS PAGE 5: SENDING THE SIGNAL FROM YOUR LAPTOP TO THE SMARTBOARD (ALL CLASSROOMS)
Transcript of USING YOUR LAPTOP WITH THE SMARTBOARD...USING YOUR LAPTOP WITH THE SMARTBOARD WHAT You can use your...
USING YOUR LAPTOP WITH THE SMARTBOARD
WHAT You can use your laptop in the classroom and connect it to the SmartBoard.
HOW In this tutorial, you will learn how to connect the necessary cables to your laptop and how to send the video signal to the SmartBoard.
PAGE 2: XAVIER HALL CLASSROOMS
PAGE 3: BEN HALL CLASSROOMS WITH OLD CARTS
PAGE 4: BEN HALL CLASSROOMS WITH NEW CARTS
PAGE 5: SENDING THE SIGNAL FROM YOUR LAPTOP TO THE SMARTBOARD (ALL CLASSROOMS)
XAVIER HALL CLASSROOMS
STEP 1
There are threecables to connect.
1) The USB cable provides Smartfunctionality.Without this connected, you willsee your screenbut not have anyfunctionality.
2) The audio cable.Connect this to the Audio Out or Headphone jack on your laptop if youneed audio.
3) The video cable.This creates the connection for thevideo signal to besent to the SmartBoard.
BEN HALL CLASSROOMS WITH OLD CARTS
STEP 1
There are threecables to connect.
1) The USB cable provides Smartfunctionality.Without this connected, you willsee your screenbut not have anyfunctionality.
2) The audio cable.Connect this to the Audio Out or Headphone jack on your laptop if youneed audio.
3) The video cable.This creates the connection for thevideo signal to besent to the SmartBoard.
BEN HALL CLASSROOMS WITH NEW CARTSSTEP 1
There are threecables to connect.
1) The USB cable provides Smartfunctionality.Without this connected, you willsee your screenbut not have anyfunctionality.
2) The audio cable.Connect this to the Audio Out or Headphone jack on your laptop if youneed audio.
3) The video cable.This creates the connection for thevideo signal to besent to the SmartBoard.
STEP 2- Sending the Video Signal
Depending on your laptop model, your combination of buttons may be slightlydifferent. However, it's pretty easy to figure out which button to press.
FIRST
Press down and hold the fn key at the bottom left of your keyboard.
SECOND
While holding down the fn key, pressthe monitor key. On this laptop, itcorresponds with the f4 key.
The monitor icon is in blue below thef4 and is a rectangle that looks like a TV or computer monitor.
You may have to press the f4 key a couple of times to get the screen to project on both the laptop and the screen.
NOTE: On some laptops, it is the f7 key.
