User’s Guide for Nokia N93nds2.webapps.microsoft.com/.../phones/guides/...en.pdf · The wireless...

User’s Guide for Nokia N93

Copyright © 2006 Nokia. All rights reserved.

DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION, declares that this RM-55 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/

Copyright © 2006 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia, Nokia Connecting People, Visual Radio, and Pop-Port are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.

This product includes software licensed from Symbian Software Ltd (c) 1998-200(6). Symbian and Symbian OS are trademarks of Symbian Ltd.

Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Hi/fn ®, LZS ®, ©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2006. Tegic Communications, Inc. All rights reserved.

This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC / INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

9247229_N93-1_en_Apac.book Page i Thursday, May 18, 2006 3:43 PM

......................................28 clips ............................................ 29

........................................................ 29

........................................................ 31

........................................................ 32

........................................................ 32

........................................................ 33

........................................................ 33

........................................................ 33

s ..................................36........................................................ 36........................................................ 37........................................................ 38

......................................39........................................................ 40ges ................................................. 41ges ................................................ 43........................................................ 45IM card ......................................... 47........................................................ 47

9247229_N93-1_en_Apac.book Page ii Thursday, May 18, 2006 3:43 PM

Copyri

CoFor yo

Your ModesUseful SettingTransfeEssentiKeypadVolumeClock ..HeadseWrist aWirelesHome nMemorFile maHelp....Tutoria

CameRecordTake pi

ght © 2006 Nokia. All rights reserved.

ntentsur safety...........................................5

Nokia N93.........................................8........................................................................................8shortcuts .................................................................. 10s.................................................................................. 11r content from another device .......................... 11al indicators............................................................. 12 lock (keyguard) ..................................................... 13 and loudspeaker control.................................... 13

..................................................................................... 13t .................................................................................. 14nd lens cover straps.............................................. 15s LAN ........................................................................ 15etwork ..................................................................... 16y card ........................................................................ 17nager......................................................................... 19..................................................................................... 20l................................................................................... 20

ra......................................................21 videos ....................................................................... 21ctures ........................................................................ 23

Gallery.................View images and videoEdit video clips.............Edit images ...................Slide show.....................TV out mode .................Presentations................Albums ...........................Online sharing..............

Media applicationMusic player .................Image print ...................Back up files .................

Messaging...........Write text ......................Write and send messaInbox — receive messaMailbox ..........................View messages on a SMessaging settings.....

06 Nokia. All rights reserved.

ntries.........................................70.....................................................70

....................................71ervice) ........................................ 71..................................................... 73.....................................................75..................................................... 76..................................................... 77

....................................78..................................................... 78..................................................... 81..................................................... 82..................................................... 82..................................................... 82..................................................... 83..................................................... 84..................................................... 85

....................................88..................................................... 88..................................................... 88.....................................................88.....................................................89..................................................... 89

9247229_N93-1_en_Apac.book Page iii Thursday, May 18, 2006 3:43 PM

Copyright © 20

Make calls ............................................... 52Voice calls..............................................................................52Video calls..............................................................................54Video sharing (network service) ......................................55Answer or reject a call .......................................................58Log ...........................................................................................60

Contacts (Phonebook) ............................ 62Save names and numbers .................................................62Copy contacts.......................................................................63Add ringing tones for contacts........................................64Create contact groups........................................................64

Web.......................................................... 65Web access point.................................................................65Bookmarks view ...................................................................65Connection security ............................................................66Browse ....................................................................................66Download and purchase items ........................................67End a connection.................................................................67Web settings .........................................................................68

Calendar................................................... 69Create calendar entries......................................................69Meeting requests.................................................................69Calendar views .....................................................................70

Manage your calendar eCalendar settings ...........

My own.................Visual Radio (network sRealPlayer.........................Flash Player......................Movie director.................Games................................

Connectivity .........Bluetooth connectivity .Infrared connection.......Data cbl.............................PC connections ...............Connection manager.....Synchronization..............Device manager ..............Home network.................

Office ....................Calculator .........................Converter ..........................Notes..................................Web browser....................Recorder............................

................................... 111

......................................................111

on ............................. 115ing...............................................115ication guidelines ...................116

hancements.............. 118......................................................119t HS-26W ................................119t HS-36W.................................120r CR-39 ......................................120

ance ......................... 122

information............. 123

................................... 127

9247229_N93-1_en_Apac.book Page iv Thursday, May 18, 2006 3:43 PM


Barcode reader..................................................................... 89Quickoffice............................................................................ 90

Personalize your device ...........................93Profiles — set tones ............................................................ 93Change the look of your device ...................................... 94Active standby mode.......................................................... 95

Tools..........................................................96Media key .............................................................................. 96Settings.................................................................................. 96TV configuration................................................................107Voice commands ...............................................................107Application manager........................................................107Activation keys for copyright-protected files...........110

Troubleshooting .Q&A.................................

Battery informatiCharging and dischargNokia battery authent

Nokia original enBattery............................Nokia Wireless HeadseNokia Wireless HeadseNokia Universal Holde

Care and mainten

Additional safety

Index ...................

06 Nokia. All rights reserved. 5

WHEN REFUELING Do not use refueling point. Do not use near

cals.

NEAR BLASTING Follow any o not use the device where progress.

Y Use only in the normal plained in the product n. Do not touch the antenna .

RVICE Only qualified personnel repair this product.

NTS AND BATTERIES Use only ancements and batteries. Do not

patible products.

STANCE Your device is not nt. Keep it dry.

PIES Remember to make s or keep a written record of all

ormation.

9247229_N93-1_en_Apac.book Page 5 Thursday, May 18, 2006 3:43 PM

Copyright © 20

For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.

SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.

ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.

INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance.

SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical equipment.

SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF the device at afuel or chemi

SWITCH OFF restrictions. Dblasting is in

USE SENSIBLposition as exdocumentatiounnecessarily

QUALIFIED SEmay install or

ENHANCEMEapproved enhconnect incom

WATER-RESIwater-resista

BACK-UP COback-up copieimportant inf

6

any features in this device, other lock, the device must be switched h the device on when wireless ause interference or danger.

cesust have service from a wireless

of the features in this device he wireless network to function. may not be available on all ve to make specific arrangements er before you can utilize network ovider may need to give you for their use and explain what e networks may have limitations use network services. For instance, support all language-dependent

. Network features are designated k services).

ay have requested that certain not activated in your device. If so, your device menu. Your device may configured. This configuration menu names, menu order, and ice provider for more information.



CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.

EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. The keypad is active only in the Fold open mode. Press as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press . Give your location. Do not end the call until given permission to do so.

About your deviceThe wireless device described in this guide is approved for use on the EGSM 900/1800/1900 and UMTS 2100 networks. Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate rights of others.

When taking and using images or video clips, obey all laws and respect local customs as well as privacy and legitimate rights of others.

This device supports common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 97, 2000, XP, and 2003). Not all file formats can be viewed or modified.

Warning: To usethan the alarm con. Do not switcdevice use may c

Network serviTo use the device you mservice provider. Many depend on features in tThese network services networks or you may hawith your service providservices. Your service pradditional instructions charges will apply. Somthat affect how you cansome networks may notcharacters and servicesin this guide by (networ

Your service provider mfeatures be disabled or they will not appear on also have been speciallymay include changes inicons. Contact your serv


use with this device is BP-6M.

y batteries, chargers, and roved by Nokia for use with this he use of any other types may roval or warranty, and may be

ed enhancements, please check ou disconnect the power cord of and pull the plug, not the cord.


Copyright © 20

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail, and content downloading using the browser or over MMS, require network support for these technologies.

For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.

Enhancements, batteries, and chargersAlways switch the device off and disconnect the charger before removing the battery.

Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3, or AC-4 charger, and from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9, or LCH-12 charger when used with the CA-44 charger adapter.

The battery intended for

Warning: Use onlenhancements appparticular model. Tinvalidate any appdangerous.

For availability of approvwith your dealer. When yany enhancement, grasp

8

, the cover display provides clock On the standby mode display, the tery indicators, time information, e name of the active profile

may be shown. If you are using the a sound clip, volume bars and splayed. Use the side scroll keys to t/previous sound clip, and turn the

adio in the Fold closed mode, the own on the cover display. You can ions with station name, frequency, n. This information is shown on the e audio on and off, change the

channels, use the scroll key on the

ms and notes for missed calls and are also displayed. To view received ext and image objects of received pen the fold, and view the message

ated by their normal tone and a y settings, select Answer if fold l when you open the fold. If a



Your

Nok

ia N

93 Your Nokia N93Model number: Nokia N93-1

Hereinafter referred to as Nokia N93.

ModesYour device has four mechanical modes that are optimized for different use situations: Fold closed for carrying, Fold open for traditional mobile phone use, Imaging for recording video and taking pictures, and View for viewing your images and videos. To switch between the modes, turn the fold and the swing axis display. There is a short time-out before a mode is activated.

Fold closed modeWhen the fold is closed, the main display deactivates and the cover display lights up. Ongoing calls end, unless the loudspeaker is in use or a compatible headset is connected. To change the settings, see "Cover display", on page 97. If you are using the player to listen to a sound clip, it continues to play.

In the Fold closed modeand status information.signal strength and batstatus indicators, and th(if other than General) music player to listen totrack information are diplay, pause, play the nexvolume up or down.

If you are using Visual Rvisual content is not shstore several preset statand location informatiocover display. To turn thchannel, and seek new side of the device.

Calendar and clock alarnew received messages text messages and the tmultimedia messages, oon the main display.

Incoming calls are indicnote. In the cover displaopened to answer a cal


Your

Nok

ia N

93

9

ivated even if the fold is not fully out 160 degrees, as shown in the fold to open more.

p

e .

e

e pictures. See "Camera", on

keypad is not active. You can use y, side scroll key, camera mode ated on the side of the device), ape selection keys and selection play.


Copyright © 20

compatible headset is connected to the device, press the answer key on the headset. To change the settings, see "Cover display", on page 97.

To make calls or use the menu, open the fold.

To use the flash as a torch light, press the flash key on the side of the device. To operate the torch light:• Quickly press the flash key once. The torch light is

activated for 1.5 seconds.• Quickly press the flash key twice. The torch light is

activated for 3 minutes, or until you press the flash key again.

• Press and hold the flash key. The torch light is activated and stays on for as long as you hold the key or until the 3 minute time-out ends.

Fold open modeWhen you open the fold, the Fold open mode is activated automatically: the main display lights up, the keypad is available, and you can access the menu. Scroll in the menu with the scroll key.

The Fold open mode is actopened. The fold opens abpicture. Do not force the

Imaging modeWhen you open the fold uto 90 degrees, hold the device sideways, and turnthe fold down so that themain display faces you, thImaging mode is activatedThe main camera is activated, and you can sethe view to be captured.

In the Imaging mode, youcan record videos and takpage 21.

In the Imaging mode, the the capture key, zoom kekey, and flash key (all locpower key, and the landsckeys next to the main dis

10

saved data before closing an

running in the background d on battery power and reduces

fully press the capture key in the

ailbox (network service), press and

applications, press and hold . page 96.e, press , and select a profile.he General and Silent profiles, f you have two phone lines, this een the two lines.

led numbers list, press .nds, press and hold .n to Services, press and hold . 65.

ilable in the standby mode, see on page 95.

list, scroll to it, and press and e.ms in a list, press and hold r . To end the selection, release .



Your

Nok

ia N

93 View modeWhen the fold is closed and you lift the side of the swing axis display when the fold is closed, the View mode is activated.

Use the View mode to do the following:• View your images.• Activate photos and

movies from the gallery to watch slideshows.

• Make hands free video calls and send live video during a video call. Adjust the angle of the display for optimum secondary camera angle.

Useful shortcutsUse shortcuts to quickly get the most from your device. Refer to the relevant sections in this user guide for further details of the functions.

Standby mode• To switch between applications that are open, press

and hold , and select an application. If memory is low, the device may close some applications. The

device saves any unapplication.Leaving applicationsincreases the demanthe battery life.

• To start the camera,Imaging mode.

• To call your voice mhold .

• To open multimediaSee "Media key", on

• To change the profil• To switch between t

press and hold . Iaction switches betw

• To open the last dia• To use voice comma• To start a connectio

See "Web", on page

For other shortcuts ava"Active standby mode",

Edit text and lists• To mark an item in a

at the same tim• To mark multiple ite

while you press o, then release


Your

Nok

ia N

93

11

ard in the other device. When ed on without a SIM card, the ically activated.

ols > Transfer on your Nokia

w, select Continue.nt to use Bluetooth connectivity the data. Both devices must onnection type.h connectivity, to have your devices with Bluetooth ntinue. Select your other device asked to enter a code on your de (1-16 digits), and select OK. n the other device, and select w paired. See "Pair devices", on

ls, the Transfer application is ce as a message. To install device, open the message, and s on the display.connect the two devices. See , on page 81. select the content you want to evice.


Copyright © 20

• To copy and paste text: To select letters and words, press and hold . At the same time, press or to highlight text. To copy the text to clipboard, while still holding , select Copy. To insert the text into a document, press and hold , and select Paste.

SettingsYour Nokia N93 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured in the device, based upon your service provider or network operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message.

Transfer content from another device

You can copy content such as contacts and calendar entries from a compatible Nokia phone to your Nokia N93 using Bluetooth connectivity or infrared. The type of content that can be copied depends on the phone model.

Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.

You can insert your SIM cyour Nokia N93 is switchoffline profile is automatTransfer content1 Press , and select To

N93.2 In the information vie3 Select whether you wa

or infrared to transfersupport the selected c

4 If you select BluetootNokia N93 search for connectivity, select Cofrom the list. You are Nokia N93. Enter a coEnter the same code oOK. The devices are nopage 80.For some phone modesent to the other deviTransfer on the otherfollow the instructionIf you select infrared, "Infrared connection"

5 From your Nokia N93,copy from the other d

12

d is locked.

ive.

e is being used (network service).

device are forwarded to another phone lines (network service), the e is and for the second

ted to the device.

headset with Bluetooth st.

ted to the device.

nnected to the device.

ket data connection is available.

ket data connection is active.

ket data connection is on hold.

connection is available.

connection is active.

connection is on hold.

vice to scan for wireless LANs, and ble. See "Wireless LAN", on



Your

Nok

ia N

93 Content is copied from the memory and compatible memory card (if inserted) of the other device to the corresponding location in your Nokia N93 and memory card (if inserted). The copying time depends on the amount of data to be transferred. You can cancel copying and continue later.

To view the log information of a previous transfer, in the main view, select Transfer log.

To view the devices you have copied or transferred data from, in the main view, select Phones.

Essential indicators The device is being used in a GSM network.

The device is being used in a UMTS network (network service).

You have one or more unread messages in the Inbox folder in Messag..

You have received new e-mail in the remote mailbox.

There are messages waiting to be sent in the Outbox folder.

You have missed calls.

Shown if Ringing type is set to Silent and Message alert tone, IM alert tone, and E-mail alert tone are set to Off.

The device keypa

A clock alarm is act

The second phone lin

All calls to the number. If you have twoindicator for the first lin

.

A headset is connec

The connection to aconnectivity has been lo

A loopset is connec

A text phone is co

A data call is active.

A GPRS or EDGE pac

A GPRS or EDGE pac

A GPRS or EDGE pac

A UMTS packet data

A UMTS packet data

A UMTS packet data

You have set the dea wireless LAN is availapage 102.


Your

Nok

ia N

93

13

udspeaker controle ve

ing .

allows you to speak and listen out having to hold the device to

hold the device near your ear ker is in use, because the volume loud.

ring a call, select Options >

er, select Options > Activate

k. To set a new alarm, select en an alarm is active, is

ct Stop, or to stop the alarm for .


Copyright © 20

A wireless LAN connection is active in a network that has encryption.

A wireless LAN connection is active in a network that does not have encryption.

Bluetooth connectivity is on.

Data is being transmitted using Bluetooth connectivity.

A USB connection is active.

An infrared connection is active. If the indicator is blinking, the device is trying to connect to the other device or the connection has been lost.

Keypad lock (keyguard)Use the keypad lock to prevent the keys from being accidentally pressed.To turn on the display light when the keypad lock is on, press the power key.• To lock: In the standby mode, press , then .

When the keys are locked, is shown on the display.• To unlock in the Fold open mode: Press , then .• To unlock in the Fold closed mode: Press the scroll key.

An unlock dialog appears on the cover display. Select Yes by moving the scroll key.

When the keypad lock is on, calls may be possible to the official emergency number programmed into your device.

Volume and loTo increase or decrease thvolume level when you haan active call or are listento a sound, press or

The built-in loudspeaker from a short distance withyour ear.

Warning: Do not when the loudspeamay be extremely

To use the loudspeaker duActivate loudsp..To turn off the loudspeakhandset.

Clock

Press , and select ClocOptions > Set alarm. Whshown.

To turn off the alarm, sele5 minutes, select Snooze

14

view, open Clock, and press . you can view the time in different

select Options > Add city. You can ities to the list.

, scroll to a city, and select city. The city is displayed in the e time in your device is changed lected. Check that the time is ur time zone.

TM e.

you use the headset, your ability ounds may be affected. Do not use re it can endanger your safety.



Your

Nok

ia N

93 If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.

To cancel an alarm, select Clock > Options > Remove alarm.

Clock settingsTo change the clock settings, select Clock > Options > Settings.

To change the time or date, select Time or Date.

To change the clock shown in the standby mode, select Clock type > Analogue or Digital.

To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Network operator time > Auto-update.

To change the alarm tone, select Clock alarm tone.

World clockTo open the world clockIn the world clock view,cities.

To add cities to the list, add a maximum of 15 c

To set your current cityOptions > My current clock main view, and thaccording to the city secorrect and matches yo

HeadsetConnect a compatible headset to the Pop-Portconnector of your devic

Warning: Whento hear outside sthe headset whe


Your

Nok

ia N

93

15

acy (WEP) with keys up to 128 ccess (WPA), and 802.1x hese functions can be used only by the network.

t access point (IAP) in a wireless ations that need to connect to

ss pointnnect. > Conn. mgr. > Availab.

r wireless LANs within range. in which you want to create an and select Options > Define

Internet access point with w or change these settings, see ge 99.

you to select an access point, point, or to search for wireless rch for WLAN.

n is established when you create a wireless LAN Internet access LAN connection ends when you To end the connection, see n page 82.


Copyright © 20

Wrist and lens cover strapsThread the straps as shown, and tighten them.

Wireless LANYour device supports wireless local area network (wireless LAN). With wireless LAN, you can connect your device to the Internet and compatible devices that have wireless LAN. For information about using your device in a home network, see "Home network", on page 16.

Some places, like France, have restrictions on the use of wireless LAN. Check with your local authorities for more information.

Features using wireless LAN, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.

Your device supports the following wireless LAN features:• IEEE 802.11b/g standard• Operation at a frequency of 2.4 GHz

• Wired equivalent privbits, Wi-Fi protected aencryption methods. Tif they are supported

You can create an InterneLAN, and use it for applicthe Internet.Create an Internet acce1 Press , and select Co

WLAN.2 The device searches fo

Scroll to the network Internet access point,access point.

3 The device creates andefault settings. To vie"Access points", on pa

When an application asksselect the created accessLANs in range, select Sea

A wireless LAN connectioa data connection using point. The active wirelessend the data connection."Connection manager", o

16

kle with Universal Plug and Play LAN access point device, you can and connect compatible UPnP reless LAN to the network, such as atible PC, a compatible printer, and tem or a TV, or a sound system or patible wireless multimedia

ed the home network, you can atible media files and print images connected compatible devices, for tored on your Nokia N93 on a me network", on page 85 and 37.

ay prevent some images, music ), and other content from being ed, played, or printed.

ng in your wireless LAN, first create less LAN home Internet access e devices. On your Nokia N93,

n the Home network application. e PC to the home network, on the Media Server software from the

h your Nokia N93.



Your

Nok

ia N

93 You can use wireless LAN during a voice call or when packet data is active. You can only be connected to one wireless LAN access point device at a time, but several applications can use the same wireless LAN connection.

When you activate the Offline profile, you can still use wireless LAN (if available). Remember to comply with any applicable safety requirements when establishing and using a wireless LAN connection.

There are two operating modes in wireless LAN: infrastructure and ad hoc.

The infrastructure operating mode allows two kinds of communication: wireless devices are connected to each other through a wireless LAN access point device, or wireless devices are connected to a wired LAN through a wireless LAN access point device.

In the ad hoc operating mode, devices can send and receive data directly with each other. To create an Internet access point for the ad hoc network, see "Access points", on page 99.

Tip! To check the unique media access control (MAC) address that identifies your device, enter *#62209526# in the standby mode.

Home networYour device is compatib(UPnP). With a wirelesscreate a home network devices that support wiyour Nokia N93, a compa compatible sound sysTV equipped with a comreceiver.

After you have configurcopy, view, or play compin Gallery on the other example, view images scompatible TV. See "Ho"Image print", on page

Copyright protections m(including ringing tonescopied, transferred, view

To set up home networkiand configure your wirepoint, then configure thconfigure the settings iTo connect a compatiblPC, you must install theDVD-ROM supplied wit


Your

Nok

ia N

93

17

ttings of the wireless LAN our Nokia N93, see "Access

rating mode to create a home le device, enable one of the LAN security mode when you cess point. This step reduces the joining the ad hoc network.

f another device attempts to e network. Do not accept

an unknown device.

a network that does not have ring Nokia N93 files with other

ny private media files. To change e network settings", on page 85.

atible miniSD extra storage y on your up vice to the memory card.

SD memory cards with this ds, such as Reduced Size

fit in the memory card slot and


Copyright © 20

After you have completed the necessary configurations in all devices connected to the network, you can start using Home network to share your media files. See "View media files", on page 86.

The home network uses the security settings of the wireless LAN connection. Use the home network feature in a wireless LAN infrastructure network with a wireless LAN access point device and encryption enabled.

Important: Always enable one of the available encryption methods to increase the security of your wireless LAN connection. Using encryption reduces the risk of unauthorize access to your data.

Your device is connected to the home network only if you accept a connection request from another device, or in Gallery, select the option to view, play, print, or copy media files on your Nokia N93 or search for other devices in the Home network folder.

Important security informationWhen you configure your wireless LAN home network, enable an encryption method, first on your access point device, then on the other devices you intend to connect to your home network. Refer to the documentation of the devices. Keep any passcodes secret and in a safe place separate from the devices.

To view or change the seInternet access point in ypoints", on page 99.

If you use the ad hoc openetwork with a compatibencryption methods in Wconfigure the Internet acrisk of an unwanted party

Your device notifies you iconnect to it and the homconnection requests from

If you use wireless LAN inencryption, switch off shadevices, or do not share asharing settings, see "Hom

Memory cardYou can purchase a compmemory card and use it asspace to save the memordevice. You can also backinformation from your de

Use only compatible minidevice. Other memory carMultiMediaCards, do not

18

card, press the power key, em. card. All applications

ory card and press 'OK' is n the door of the memory card slot.rd to release it from the slot. card. If the device is switched on, pted to confirm the removal.

ot remove the memory card in the ration when the card is being ing the card in the middle of an mage the memory card as well as ata stored on the card may be

card tool

ls > Memory. You can use a extra storage space and for tion in the device memory.

from the device memory to a tions > Backup phone mem.

rom the memory card to the device > Restore from card.



Your

Nok

ia N

93 are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.

Keep all memory cards out of the reach of small children.Insert the memory card1 To open the door of the

memory card slot, swing it upwards in a counterclockwise direction.

2 Insert the memory card in the slot. Ensure that the contact area on the card is facing up.

3 Push the card in. You hear a click when the card locks into place.

4 Close the door. You cannot use the memory card if the door is open.

Eject the memory card1 Before you eject the

and select Remove mare closed.

2 When Remove memdisplayed, swing ope

3 Press the memory ca4 Remove the memory

select OK when promImportant: Do nmiddle of an opeaccessed. Removoperation may dathe device, and dcorrupted.

Memory

Press , and select ToominiSD memory card asbacking up the informa

To back up informationmemory card, select Op

To restore information fmemory, select Options


Your

Nok

ia N

93

19

view ( ) opens. Press to ew ( ) (if available).

folder, press and at the and select Options > Move to

ns > Find and the memory from r a search text that matches the

sumption a you have in the device and how nt data types consume, select ils. The amount of available memory.

ee memory the device or the memory card

ansfer data to a memory card, if o be moved, and select Move to nd a folder.

dia files to a compatible PC, for er option in Gallery. See "Back


Copyright © 20

Format a memory cardWhen a memory card is reformatted, all data on the card is permanently lost.

Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.

To format a memory card, select Options > Format mem. card. Select Yes to confirm.

Tip! For best performance, use your Nokia N93 to format all new miniSD cards.

File manager

Many features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory.

You can use a memory card as extra storage space. Memory cards are rewritable, so you can delete old information and save new data on a memory card.

To browse files and folders in the device memory or on a memory card (if inserted), press , and select Tools > File

mgr.. The device memoryopen the memory card vi

To move or copy files to asame time to mark a file,folder or Copy to folder.

To find a file, select Optiowhich to search, and entefile name.

View memory conTo view what types of datmuch memory the differeOptions > Memory detamemory is shown in Free

Memory low — frThe device notifies you ifmemory is low.

To free device memory, tryou have one. Mark files tfolder > Memory card a

You can also transfer meexample, using the transfup files", on page 38.

20

ain menu, select Tools > Help. cation to view its help topics.

formation about some of the To access the tutorial in the menu, nu > My own > Tutorial and the w.



Your

Nok

ia N

93 Tip! Use Nokia Phone Browser in Nokia PC Suite to view the different memories in your device and transfer data.

To remove data to free memory, use File mgr. or the respective application. For example, you can remove the following:• Messages from the Inbox, Drafts, and Sent folders in

Messag.• Retrieved e-mail messages from the device memory• Saved Web pages• Saved images, videos, or sound files• Contact information• Calendar notes• Downloaded applications. See also "Application

manager", on page 107.• Any other data that you no longer need

Help

Your device has context-sensitive help. When an application is open, select Options > Help to access help for the current view.

When you are reading the instructions, to switch between help and the application that is open in the background, press and hold .

To open help from the mSelect the desired appli

Tutorial

The tutorial gives you infeatures of your device.press , and select Mesection you want to vie


Cam

era

21

by rotating the display to the era is in the Switch to image de key to select Switch to video

tart recording. The record icon ording indicator flashes slowly ting that video is being recorded.ny time, press the capture key.again to resume recording.atically saved to the Images &

y. See "Gallery", on page 28.

r adjustments before recording ode, use the side scroll key to r. See "Setup settings — Adjust e 26 and "Shooting modes", on

subject (continuous 3x optical m), rotate the zoom key on the


Copyright © 20

CameraYour Nokia N93 has two cameras, a high resolution camera on the side of the device (the main camera) and a lower resolution camera on the top of the main display (the secondary camera). You can use both cameras to take still images and record video in the portrait and landscape views.

The Nokia N93 device supports an image capture resolution of 2048x1536 pixels using the main camera. The image resolution in these materials may appear different.

The images and video clips are automatically saved in the Images & video folder in Gallery. The cameras produce .jpeg images. Video clips are recorded in the .mp4 file format, or in the 3GPP file format with the .3gp file extension (Sharing modes). See "Video settings", on page 22.

You can send images and video clips in a multimedia message, as an e-mail attachment, or by using Bluetooth connectivity.

Record videosActivate the main cameraImaging mode. If the cammode, use the camera momode.

Press the capture key to s is shown. The red rec

and a tone sounds, indica1 To stop recording at a2 Press the capture key

The video clip is automvideo folder of Galler

To make lighting and coloa video in the Imaging mscroll through the toolbacolor and lighting", on pagpage 26.

To zoom in or out of the and up to 20x digital zooside of the device.

22

clip, select the following from the

the video clip you just recorded,

o keep the video, select Delete.ing multimedia, e-mail, Bluetooth, call key, or select Send. For more

essaging", on page 39 and vity", on page 78. This option is not active call. You cannot send video p4 file format in a multimedia

o clip, select New video.he Offline profile to ensure your g is not interrupted by incoming es.

ettings for the video recorder: ettings. To adjust Video setup, see t color and lighting", on page 26. n to the default settings after you e main settings remain the same gain. To change the main settings, gs and from the following:

ct On if you want to record sound.



Cam

era The video viewfinder displays the following:

• Status indicators (1) for audio mute on, stabilization on, and the current capture mode.

• The toolbar (2), which you can scroll through before recording to select the shooting mode, white balance, and color tone (the toolbar is not displayed during recording).

• The total available video recording time (3). When you are recording, the current video length indicator also shows the elapsed time and time remaining.

• The device memory ( ) and memory card ( ) indicators (4) show where videos are saved.

• The video quality indicator (5) indicates whether the quality of the video is TV (high), TV (normal), Handset (high), Handset (normal), or Sharing.

• The video clip file type (6).Tip! Select Options > Turn icons on to display all viewfinder indicators or Turn icons off to display only the video status indicators.

After you record a videotoolbar:• To immediately play

select Play.• If you do not want t• To send the video us

or infrared, press theinformation, see "M"Bluetooth connectiavailable during an clips saved in the .mmessage.

• To record a new videTip! Activate tvideo recordincalls or messag

Video settingsThere are two kinds of sVideo setup and main s"Setup settings — AdjusThe setup settings returclose the camera, but thuntil you change them aselect Options > Settin

Audio recording — Sele


Cam

era

23

the default memory store: y card (if inserted).

by rotating the display to era is in Switch to video mode, to switch to Switch to image

bject, press the capture key era only). The green locked focus display. If the focus was not cator appears. Release the halfway down again. You can, without locking the focus.

ain camera, press the capture ice before the image is saved.

d color adjustments before aging mode by using the side h the toolbar. See "Setup nd lighting", on page 26.

e may take longer if you change or settings.


Copyright © 20

Video quality — Set the quality of the video clip to TV (high) (best quality for long term usage and playback on a compatible TV or PC and handset), TV (normal), Handset (high), Handset (normal), or Sharing (limited video clip size to send using multimedia message (MMS)). If you want to view the video on a TV or PC, select TV (high), which has VGA resolution (640x480) and the .mp4 file format. To send the video clip through MMS, select Sharing (QCIF resolution, .3gp file format). The size of the video clip recorded with Sharing is limited to 300 KB (about 20 seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device.

Video stabilisation — Select On to reduce camera shake when recording the video.

Add to album — Select whether you want to add the recorded video clip to a certain album in Gallery. Select Yes to open a list of available albums.

Show captured video — Select whether you want the first frame of the recorded video clip to be shown on the display after the recording stops. Select Play from the toolbar (main camera) or Options > Play (secondary camera) to view the video clip.

Optical zoom during recording — Select On or Off. Select Off to eliminate mechanical noise caused by lens movement during optical zooming when recording.

Memory in use — Definedevice memory or memor

Take picturesActivate the main cameraImaging mode. If the camuse the camera mode keymode.

To lock the focus on an ohalfway down (main camindicator appears on the locked, the red focus indicapture key, and press it however, take the picture

To take a picture, in the mkey. Do not move the dev

You can make lighting antaking a picture in the Imscroll key to scroll througsettings — Adjust color a

Saving the captured imagthe zoom, lighting, or col

24

ions > Turn icons on to display all icators or Turn icons off to display ra status indicators.

note the following:eep the camera still.tally zoomed picture is lower than d picture.o the battery saving mode if there r a moment. To continue taking

, select the following from the toolbar:o keep the image, select Delete.ing multimedia, e-mail, Bluetooth, call key, or select Send.age, select New image.select Print. See "Image print", on

era settingsettings for the still image camera: ettings. To adjust Image setup, see t color and lighting", on page 26. n to the default settings after you e main settings remain the same gain. To change the main settings,

gs and from the following:



Cam

era The camera viewfinder displays the following:

• Status indicators (1) for sequence on, self-timer on; Automatic ( ), On ( ), or Off ( ) flash mode, and the current capture mode.

• The toolbar (2), which you can scroll through before capturing the image to select the shooting mode, white balance, exposure value, and color tone (the toolbar is not displayed during focus and image capture).

• The image resolution indicator (3) indicates whether the quality of the image is Print 3M - Large (2048x1536 resolution), Print 2M - Med. (1600x1200 resolution), Print 1.3M - Small (1280x960 resolution), or MMS 0.3M (640x480 resolution).

• The image counter (4) displays the estimated number of images you can capture using the current image quality setting and memory in use (the counter is not displayed during focus and image capture).

• The device memory ( ) and memory card ( ) indicators (5) show where images are saved.

Tip! Select Optviewfinder indonly the came

When taking a picture, • Use both hands to k• The quality of a digi

that of a nonzoome• The camera goes int

are no keypresses fopictures, press .

After you take the picture• If you do not want t• To send the video us

or infrared, press the• To capture a new im• To print the picture,

page 37.

Still image camThere are two kinds of sImage setup and main s"Setup settings — AdjusThe setup settings returclose the camera, but thuntil you change them aselect Options > Settin


Cam

era

25

where to store your images.

sequenceble only in the main camera.

up to six pictures in a sequence ble), select Options > Sequence

s the capture key.

s, they are shown in a grid on ture, press to open it.

ence mode with the self-timer.

mode viewfinder, press the

e — self-timer only in the main camera.

y the capture so that you can ture. To set the self-timer delay, er > 2 seconds, 10 seconds, or he self-timer, select Activate.

) blinks and the device beeps g. The camera takes the picture lapses.

-timer in the sequence mode.


Copyright © 20

Image quality — Print 3M - Large (2048x1536 resolution), Print 2M - Med. (1600x1200 resolution), Print 1.3M - Small (1280x960 resolution), or MMS 0.3M (640x480 resolution). The better the image quality, the more memory the image consumes. If you want to print the image, select Print 3M - Large, Print 2M - Med., or Print 1.3M - Small. If you want to send it through e-mail, select Print 1.3M - Small. To send the image through MMS, select MMS 0.3M.

These resolutions are only available in the main camera.

Add to album — Select whether you want to save the image to a certain album in the gallery. If you select Yes, a list of available albums opens.

Show captured image — Select Yes if you want to see the captured image after it is taken, or No if you want to continue taking pictures right away.

Extended zoom (main camera only) — Select On (continuous) to allow the zoom increments to be smooth and continuous between digital and extended digital zoom, On (paused) to allow the zoom increments to pause at the digital and extended digital step point. If you want to limit the zoom to where the selected image quality is maintained, select Off.

Flicker cancellation — Select 50Hz or 60Hz.

Shutter tone — Select the tone you want to hear when you take a picture.

Memory in use — Select

Take pictures in aSequence mode is availa

To set the camera to take(if enough memory availamode.

To take the pictures, pres

After you take the picturethe display. To view a pic

You can also use the sequ

To return to the sequencecapture key.

You in the picturThe self-timer is available

Use the self-timer to delainclude yourself in the picselect Options > Self tim20 seconds. To activate tThe self-timer indicator (when the timer is runninafter the selected delay e

You can also use the self

26

t the current lighting condition s the camera to reproduce colors

s only) — Adjust the exposure time

color effect from the list.

ges to match any settings you ow the change affects the pictures

ary depending on the selected

amera specific; if you change the y camera, the settings in the main The setup settings do, however, age and video modes.

you to find the right color and current environment. Select a or taking pictures or recording oting mode list. The settings of ve been set according to a certain



Cam

era Tip! Select Options > Self timer > 2 seconds to

keep your hand steady when taking a picture.

FlashThe flash is available only in the main camera.

Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.

The camera has an LED flash for low light conditions. The following flash modes are available: Automatic ( ), On ( ), and Off ( ).

To switch between the flash modes, press the flash key.

Setup settings — Adjust color and lightingTo enable the camera to reproduce colors and lighting more accurately, or to add effects to your pictures or videos, use the side scroll key to scroll through the toolbar, and select from the following options:

Shooting mode — Select a proper shooting mode for the environment in which you take pictures. Every shooting mode uses its own lighting settings that have been adjusted according to a certain kind of environment.

White balance — Selecfrom the list. This allowmore accurately.

Exposure value (imageof the camera.

Colour tone — Select a

The screen display chanmake, so that you see hor videos.

The available settings vcamera.

The setup settings are csettings in the secondarcamera do not change. transfer between the im

Shooting modesA shooting mode helps lighting settings for theproper shooting mode fvideo clips from the shoeach shooting mode hastyle or environment.


Cam

era

27


Copyright © 20

Shooting modes are only available in the main camera.

Use the side scroll key to scroll through the toolbar, and select from the following options:

Video shooting modes

Normal ( ) (default) and Night ( )

Image shooting modes

Automatic ( ) (default), User ( ), Close-up mode ( ), Landscape ( ), Night ( ), and Night portrait ( ).

When you take pictures, the default shooting mode is Automatic.

To make your own shooting mode suitable for a certain environment, scroll to User, and select Options > Change. In the user defined shooting mode you can adjust different lighting and color settings. To copy the settings of another shooting mode, select Based on shooting mode and the desired shooting mode.

28

the memory card (if inserted) or to file and Options > Move and y card/Move to memory card or ove to phone mem..

ory card (if inserted) are indicated the phone memory are indicated

ages that you already copied to to a compatible PC, select memory > Shrink. Selecting lution of an image to 640x480. To ace after you have copied items to

es, select a file and Options > Free files", on page 38.

allery in one of the main folders t Graphic downl., Video downl., downl.. The browser opens, and ark from which the site can

d in Gallery with other compatible ireless LAN, you must first create less LAN home Internet access re the Home network application. page 15.



Galle

ry GalleryTo store and organize your images, video clips, sound clips, playlists, and streaming links, or share your files with other compatible Universal Plug and Play devices through wireless LAN, press , and select Gallery. To open the gallery from the Camera application, select Options > Go to Gallery. From Camera, only the Images & video folder is available.

Tip! To switch from Gallery to the camera, in the Images & video folder, press the capture key or the camera mode key, or select Options > Go to Camera.

Select Images & video , Tracks , Sound clips , Streaming links , Presentations , All files , or Home network , and press to open it.

Video clips, .ram files, and streaming links are opened and played in the RealPlayer application. See "RealPlayer", on page 73. You can also create albums; and mark, and add items to albums. See "Albums", on page 33.

To open a file, press . Videos open in RealPlyr., and music and sound clips in Music player. See "View images and video clips", on page 29.

To copy or move files todevice memory, select acopy > Copy to memorCopy to phone mem./M

Files stored on the memwith . Files stored inwith .

To reduce the size of imother locations, such asOptions > Transfer andShrink reduces the resoincrease free memory spother locations or devicmemory. See "Back up

To download files into Gusing the browser, selecTrack downl., or Soundyou can select a bookmdownload.

To share media files saveUPnP devices through wand configure your wirepoint, and then configuSee "Wireless LAN", on


Galle

ry

29

ips, select a video clip or several elect Options > Edit. See "Edit

compatible printer, or to store d (if inserted) for printing, select age print", on page 37.

ssage to your service provider's ice (network service), press the d (if available). Contact your information.

to an image and press .

d, to zoom an image, select om out. The zooming ratio is at e zooming ratio is not stored

ckground image, select the sign > Set as wallpaper.

eo clip, press .

ery and create custom video , and select Options >Edit. See create custom video clips, ips, and add images, sound clips,


Copyright © 20

The options related to Home network are not available in Gallery before the Home network settings have been configured.

View images and video clipsPictures taken and video clips recorded with the camera are stored in the Images & video folder in Gallery. Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, through Bluetooth connectivity, or by using infrared. To be able to view a received image or video clip in the gallery or in the media player, you must save it in the device memory or on a memory card (if inserted).

Open the Images & video folder in Gallery. The images and video clip files are in a loop, and ordered by date. The number of files is displayed. To browse the files one by one, scroll left or right. To browse files in groups, scroll up or down.

To edit a video clip or a photo, select Options > Edit. An image editor or a video editor opens. See "Edit video clips", on page 29. See "Edit images", on page 31.

To add an image or a video clip to an album in the gallery, select Options > Albums > Add to album. See "Albums", on page 33.

To create custom video clclips in the gallery, and svideo clips", on page 29.

To print your images on athem on your memory carOptions > Print. See "Im

To send a multimedia memedia file uploading servcall key, and select Uploaservice provider for more

To view the image, scroll

When the image is openeOptions > Zoom in or Zothe top of the display. Thpermanently.

To use the picture as a bapicture and Options > As

To delete an image or vid

Edit video clipsTo edit video clips in Gallclips, scroll to a video clip"Gallery", on page 28. To combine and trim video cl

30

ws the speed of the video clip.

ound — Mutes or unmutes the d.

o clip to the selected location.

video clip from the video.

py of the selected video clip.

f you added text) — To move, t; change the color and style of the stays on the screen; and add

if you added an image) — To move, image; define how long it stays on ckground or a color effect to the

only if you have added a sound he sound clip, to adjust its length, te the clip.

are three types of transitions: at he end of a video, and transitions u can select start transition when e video is active.

lip, Image, Text, Sound clip, or



Galle

ry transitions, and effects. Transitions are visual effects that you can add in the beginning and end of the video or between the video clips.

You can also use Movie director to create custom video clips. Select the video clips and images you want to create a muvee with and select Options > Edit > Create muvee. See "Movie director", on page 76.

In the video editor you can see two timelines: video clip timeline and sound clip timeline. The images, text, and transitions added to a video clip are shown on the video clip timeline. To switch between the timelines, scroll up or down.

Edit video, sound, image, text, and transitionsTo create custom video clips, mark and select one or more video clips, and select Options > Edit.

To modify the video, select from the following options:

Edit video clip:

Cut — Trims the video clip in the cut video clip view.

Add colour effect — Inserts a color effect on the video clip.

Use slow motion — Slo

Mute sound/Unmute soriginal video clip soun

Move — Moves the vide

Remove — Removes the

Duplicate — Makes a co

Edit text (shown only iremove, or duplicate textext; define how long iteffects to the text.

Edit image (shown onlyremove, or duplicate anthe screen; and set a baimage.

Edit sound clip (shownclip) — To cut or move tor to remove or duplica

Edit transition — Therethe start of a video, at tbetween video clips. Yothe first transition of th

Insert — Select Video cNew sound clip.


Galle

ry

31

taking them, or the ones already ptions > Edit.

op and rotate the image; adjust trast, and resolution; and add frame to the picture.

Options > Apply effect > Crop. anually, select Manual or a om the list. If you select Manual, er left corner of the image. Move e area to crop, and select Set. the lower right corner. Again ped. To adjust the first selected ected areas form a rectangle, image.

ed aspect ratio, select the upper be cropped. To resize the scroll key. To freeze the selected he area within the picture, use e area to be cropped, press .

eyes in an image, select Red eye reduction. Move the

ress . A loop appears on the to fit the size of the eye, move he redness, press .


Copyright © 20

Movie — Preview the movie in the full screen or as a thumbnail, save or send the movie, or cut the movie to a proper size for sending it in a multimedia message.

To take a snapshot of a video clip, in the cut video view, select Options > Take snapshot. In the thumbnail preview view, press , and select Take snapshot.

To save your video, select Options > Movie > Save. To define the Memory in use, select Options > Settings. The default is the device memory.

In the Settings view, you can also define Default video name, Default sc. shot name, Resolution, and Memory in use.

To send the video, select Send > Via multimedia, Via e-mail, Via Bluetooth, or Via infrared. Contact your network operator or service provider for details of the maximum multimedia message size that you can send. If your video is too large to send in a multimedia message,

appears.

Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth wireless technology. See "Send data using Bluetooth connectivity", on page 80. You can also transfer your videos to a compatible PC using Bluetooth connectivity, or by using a memory card reader enhancement.

Edit imagesTo edit the pictures after saved in Gallery, select O

Select Apply effect to crthe brightness, color, coneffects, text, clip art, or a

To crop an image, select To crop the image size mpredefined aspect ratio fra cross appears in the uppthe scroll key to select thAnother cross appears in select the area to be croparea, select Back. The selwhich forms the cropped

If you selected a predefinleft corner of the area tohighlighted area, use the area, press . To move tthe scroll key. To select th

To reduce redness of the Options > Apply effect >cross onto the eye, and pdisplay. To resize the loopthe scroll key. To reduce t

32

or Off.sic file from the list.

the volume during the slide show,

nd images stored in your device on ble TV. Connect the Nokia U) from the TV out Pop-Port e to the video input of a

pplications other than the Images ry and RealPlyr., the TV screen ed on the screen of your device.

e in the thumbnail view while it is oom in option is not available. ed, the opened image is displayed

.

d images as a slide show. All items ideos and images are displayed on ile the selected music plays.

ighted video clip, RealPlyr. starts n the device display and the TV , on page 73.



Galle

ry Shortcuts in the image editor:• To view an image in the full screen, press . To return

to the normal view, press again.• To rotate an image clockwise or counterclockwise,

press or .• To zoom in or out, press or .• To move on a zoomed image, scroll up, down, left, or

right.

Slide showSelect Options > Slide show > Start to view images and video clips in the full screen mode. The slide show starts from the selected file. Select from the following:• Play — to open the RealPlayer application, and play a

selected video clip• Pause — to pause the slide show• Continue — to resume the slide show, if paused• End — to close the slide show

To browse the images, press (previous) or (next).

To adjust the tempo of the slide show, before starting the slide show, select Options> Slide show > Settings > Delay between slides.

To add sound to the slide show, select Options > Slide show > Settings and from the following:

• Music — Select On • Track — Select a mu

To decrease or increase press or .

TV out modeYou can watch videos athe screen of a compatiVideo-Out Cable (CA-64connector on your deviccompatible TV. For all a& video folder in Galledisplays what is display

When you open an imagviewed on the TV, the ZWhen image is not zoomon the TV in full screen

You can view videos anin an album or marked vthe TV in full screen wh

When you open a highlplaying the video clip oscreen. See "RealPlayer"


Galle

ry

33

. A list of albums opens. Select ant to add the picture or video

album, press . The file is not & video folder in Gallery.

lity of this service may vary country or sales area, and the e available in a limited number

ication, you can share your ne albums, weblogs, or in other the Web. You can upload

posts as drafts and continue nt of the albums. The supported epending on the service provider.

y prevent some images, music and other content from being red or forwarded.

ust subscribe to the service with ervice provider. You can usually n the Web page of the service


Copyright © 20

All audio, including the stereo video clip sound, ringing tone, and key tone, is routed to the TV when the Nokia Video-Out Cable is connected to the device. You can use the device microphone normally.

TV out settings must be configured for the applicable TV system and TV aspect ratio. See "TV configuration", on page 107.

PresentationsWith presentations, you can view SVG (scalable vector graphics) files, such as cartoons and maps. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, select the Presentations folder, scroll to an image, and select Options > Play.

To zoom in, press . To zoom out, press .

To switch between full screen and normal screen, press *.

AlbumsWith albums you can conveniently manage your images and video clips. To view the albums list, in the Images & video folder, select Options > Albums > View albums.

To add a picture or a video clip to an album in the gallery, scroll to a picture or video clip, and select Options >

Albums > Add to albumthe album to which you wclip, and press .

To remove a file from an deleted from the Images

Online sharingNote: The availabiaccording to your service may only bof languages.

With the Publishing applimages and videos in onlionline sharing services oncontent, save unfinished later, and view the contecontent types may vary d

Copyright protections ma(including ringing tones),copied, modified, transfer

Get startedTo use Publishing, you man online image sharing ssubscribe to the service o

34

ad process, and save the created ack > Save as draft. If the tarted, select Cancel > Save as

e and upload the files to the Web, d, or press .

vices and videos in the online service, es in your device, in the Images & ions > Online services > Open ated a new account offline, or service settings through a Web e PC, to update the services list in ons > Retrieve services. Select a

, select from the following:ser — to connect to the selected uploaded and draft albums in the ew may vary depending on the

d edit the draft entries, and upload

20 latest entries created through



Galle

ry provider. Contact your service provider for details on subscribing to the service. For more information on compatible service providers, see www.nokia-asia.com/N93/support.

When you open the service for the first time in the Publishing application, you are prompted to provide the user name and password. You can access the settings later through Options > Settings in the Publishing application. See "Online sharing settings", on page 35.

Upload filesPress , and select Gallery > Images & video, the files you want to upload, and Options > Send > Web upload. You can access the Publishing application also from the main camera.

The Select service view opens. To create a new account to a service, select Options > Add new account or the service icon with the text Create account in the services list. If you have created a new account offline, or modified an account or service settings through a Web browser on a compatible PC, to update the services list in your device, select Options > Retrieve services. To select a service, press the scroll key.

When you select the service, the selected images and videos are shown in the edit state. You can open and view the files, reorganize them, add text to them, or add new files.

To cancel the Web uplopost as a draft, select Buploading has already sdraft.

To connect to the servicselect Options > Uploa

Open online serTo view uploaded imageand draft and sent entrivideo folder, select Optservice. If you have cremodified an account orbrowser on a compatiblyour device, select Optiservice from the list.

After you open a service• Open in Web brow

service and view theWeb browser. The viservice provider.

• Drafts — to view anthem to the Web

• Sent — to view the your device


Galle

ry

35

elect the size in which the he service

elect the size in which the image f your device. This setting does ge size.

ect the font size used to display ies, or when you add or edit text

iew or edit service provider e provider, or view details of a

ange the service provider, all the for the previous service provider e the settings of predefined

o change the access point used service, select the access point


Copyright © 20

• New post — to create a new entry

The available options may vary depending on the service provider.

Online sharing settingsTo edit the Publishing settings, in the Publishing application, select Options > Settings.

My accountsIn My accounts, you can create new accounts or edit existing accounts. To create a new account, select Options > Add new account. To edit an existing account, select an account and Options > Edit. Select from the following:

Account name — to enter a name for the account

Service provider — to select the service provider you want to use. You cannot change the service provider for an existing account, you must create a new account for the new service provider. If you delete an account in My accounts, the services related to the account are also deleted from you device, including the sent items for the service.

User name and Password — to enter the user name and password you created for your account when you registered to the online service

Upload image size — to simages are uploaded to t

Application settingsDisplay image size — to sis shown on the display onot affect the upload ima

Display text size — to seltext in draft and sent entrto a new entry

AdvancedService providers — to vsettings, add a new servicservice provider. If you chMy accounts informationis lost. You cannot changservice providers.

Default access point — tto connect to the online you want.

36

sic player, the previously played ayed. To view the music library, Music library and the desired song songs in the view, select Options >

to change between play and pause,

. To fast forward or rewind, press start playing the next or previous

ayed song list, select or playing'. To save the song list as a > Add to track list, and create a saved playlist.

ress or .

usic playback, select Options >



Med

ia a

pplic

atio

ns Media applicationsMusic player

Press , and select Music player. With the music player, you can play music files and create and listen to playlists.

Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.

Add musicWhen you open the music player for the first time, the player searches the device memory for music files to create a music library.

After you add or remove music files in the device, update your music library. Select Options > Music library > Options > Update Music library.

Tip! You can transfer music files from your device to a compatible memory card (if inserted) with Nokia Audio Manager available in Nokia PC Suite.

Play musicWhen you open the mutrack or playlist is displselect or Options > list. To start playing the Play.

When a song is playing, press or .

To stop a song, press and hold or . Tosong, press or .

To view the currently plOptions > Open 'Now playlist, select Optionsnew playlist, or select a

To adjust the volume, p

To modify the tone of mEqualiser.


Med

ia a

pplic

atio

ns

37

your images using a data cable, ), Bluetooth connectivity, or a (if available).

s that are in .jpeg format. The mera are automatically saved in

ge print, select the image you nt option in the gallery, camera, ewer.

atible with PictBridge, connect select the print option.

t for the first time, a list of yed after you select the image. er is set as the default printer.

rinter compatible with 3 cable, the printer is

t available, a list of available ed.

nter, select Options > Print r.


Copyright © 20

To select between random play and normal play mode, select Options > Random play. To select whether playing stops at the end of the playlist or restarts from its beginning, select Options > Loop.

To open your Web bookmarks for downloading music, select Options > Track downloads.

To return to the standby mode and leave the music playing in the background, select Options > Play in background.

Music libraryTo view the music library, select Options > Music library. All tracks lists all music. To view sorted songs, select Albums, Artists, Genres, or Composers. The album, artist, genre, and composer information is collected from the ID3 or M4A tags of the song files, if available.

To add songs, albums, artists, genres, or composers to a playlist, select the items and Options > Add to track list. You can create a new playlist or add to an existing one.

To view playlists, select Track lists. To create a new playlist, select Options > New track list. When viewing a playlist you have created yourself, to add more songs, select Options > Add tracks.

To delete a playlist, press . Deleting a playlist only deletes the playlist, not the music files.

Image printUse Image print to print wireless LAN (if availablecompatible memory card

You can only print imagepictures taken with the ca.jpeg format.

To print images with Imawant to print, and the priimage editor, or image vi

To print to a printer compthe data cable before you

Printer selectionWhen you use Image prinavailable printers is displaSelect a printer. The print

If you have connected a pPictBridge using the CA-5automatically displayed.

If the default printer is noprinting devices is display

To change the default prisettings > Default printe

38

media files from your device to a the wireless LAN, select Options >

ireless LAN", on page 15.

ice search. Select a device and a nt to transfer the media files.

device or Storage folder settings, gs.



Med

ia a

pplic

atio

ns Print previewThe print preview view opens only when you start printing an image in the gallery.

The selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages.

Print settingsThe available options vary, depending on the capabilities of the printing device you selected.

To set a default printer, select Options > Default printer.

To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view.

Back up filesTo transfer and back upcompatible PC through Transfer > Start. See "W

Your device starts a devfolder to which you waSelect OK.

To change the Storage select Options > Settin


Mes

sagi

ng

39

ages that have not been sent are

essages that have been sent, using Bluetooth connectivity or To change the number of e "Other settings", on page 51.

waiting to be sent are

are placed in the outbox, for evice is outside network coverage. le e-mail messages to be sent

onnect to your remote mailbox.

equest the network to send you xt messages and multimedia network service). Receiving a media message that has been may not be possible.

opened any of the default folders, the folders, press or .

requests (also known as USSD ation commands for network ovider, select Options > Service w of Messag..


Copyright © 20

MessagingPress , and select Messag.. In Messag., you can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive messages and data using Bluetooth connectivity or infrared, receive Web service messages, cell broadcast messages, and send service commands.

To create a new message, select New message.

Note: Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.

Messag. contains the following folders:

Inbox — Received messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox.

My folders — Organize your messages into folders.

Tip! To avoid rewriting messages that you send often, use texts in the templates folder.

Mailbox — Connect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See "E-mail", on page 49.

Drafts — Draft messstored here.

Sent — The last 20 mexcluding messages sent infrared, are stored here. messages to be saved, se

Outbox — Messagestemporarily stored here.

Example: Messagesexample, when your dYou can also scheduthe next time you c

Reports — You can ra delivery report of the temessages you have sent (delivery report of a multisent to an e-mail address

Tip! When you have to switch between

To enter and send servicecommands), such as activservices, to your service prcommand in the main vie

40

ess . To move the cursor to the hree times.

nputr with a single keypress. Predictive built-in dictionary to which you

is displayed when you write xt input.e text input, press , and select This activates predictive text input device.word,

. once

okia"

d, r o, d

changes after each keypress.ting the word correctly, press ss to add a space.rrect, press repeatedly to view the dictionary has found one by d select Predictive text > Matches.



Mes

sagi

ng Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options > Cell broadcast. In the main view, you can see the status of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.

Cell broadcast messages cannot be received in UMTS networks. A packet data connection may prevent cell broadcast reception.

Write textABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode.

Traditional text input is displayed when you are writing text using

traditional text input.• Press a number key ( — ) repeatedly until the

desired character appears. There are more characters available for a number key than are printed on the key.

• If the next letter is located on the same key as the present one, wait until the cursor appears (or press to end the time-out period), and enter the letter.

• To insert a space, prnext line, press t

Predictive text iYou can enter any lettetext input is based on acan add new words. text using predictive te1 To activate predictiv

Predictive text on. for all editors in the

2 To write the desired press the keys —Press each key only for one letter. For example, to write "Nwhen the English dictionary is selectepress for N, fo

for k, for i, anfor a.

The word suggestion3 When you finish wri

to confirm it, or preIf the word is not cothe matching wordsone, or press , an


Mes

sagi

ng

41

ss . To delete more than one .

ation marks are available under

haracters, press and hold .

l special characters at the same you select each character.

messagesimedia message may vary, g device.

y prevent some images, music and other content from being red or forwarded.

ultimedia message or write an e correct connection settings in and e-mail settings", on page 43 .

limit the size of MMS messages. eeds this limit, the device may

can be sent by MMS.

and one of the following: text message


Copyright © 20

If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word.

4 Start writing the next word.

Write compound wordsWrite the first half of a compound word; to confirm it, press . Write the last part of the compound word. To complete the compound word, press to add a space.

Turn predictive text input offTo turn predictive text input off for all editors in the device, press , and select Predictive text > Off.

Tip! To turn predictive text input on or off, quickly press twice.

Tips on text inputTo insert a number in the letter mode, press and hold the desired number key.

To switch between the letter and number mode, press and hold .

To switch between the different character modes, press .

To delete a character, precharacter, press and hold

The most common punctu.

To open a list of special c

Tip! To insert severatime, press when

Write and sendThe appearance of a multdepending on the receivin

Copyright protections ma(including ringing tones),copied, modified, transfer

Before you can create a me-mail, you must have thplace. See "Receive MMS and "E-mail", on page 49

The wireless network mayIf the inserted picture excmake it smaller so that it

1 Select New message Text msg. — to send a

42

t in which recorded videos are ttings", on page 22.e or record sound or video for a , select Insert new > Image, clip. To insert a new slide to the

e.timedia message looks like, select

nt to an e-mail, select Options > nd clip, Video clip, or Note. E-mail icated by .her file types as attachments, open e application, and select Send > available., select Options > Send, or press

e sending of text messages beyond single message. Longer messages o or more messages. Your service

cordingly. Characters that use and characters from some inese, take up more space limiting rs that can be sent in a single ion bar, you can see the message g backwards. For example, 10 (2)

l add 10 characters for the text to s.



Mes

sagi

ng Multimedia message — to send a multimedia message (MMS)E-mail — to send an e-mailIf you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start.

2 In the To field, press to select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press . You can also copy and paste the number or address from the clipboard.

3 In the Subject field, enter the subject of a multimedia message or e-mail. To change the fields that are visible, select Options > Address fields.

4 In the message field, write the message. To insert a template, select Options > Insert or Insert object > Template.

5 To add a media object to a multimedia message, select Options > Insert object > Image, Sound clip, or Video clip. When sound is added, is shown.

To change the formasaved, see "Video se

6 To take a new picturmultimedia messageSound clip, or Videomessage, select SlidTo see what the mulOptions > Preview.

7 To add an attachmeInsert > Image, Souattachments are ind

Tip! To send otthe appropriatVia e-mail, if

8 To send the message.

Your device supports ththe character limit for aare sent as a series of twprovider may charge acaccents or other marks,language options like Chthe number of charactemessage. In the navigatlength indicator countinmeans that you can stilbe sent as two message


Mes

sagi

ng

43

ive, retrieve, reply to, and do the following:

access point (IAP) correctly. page 99.ttings correctly. If you select g. main view and have not set up you are prompted to do so. To ail settings with the mailbox e also "E-mail", on page 49.rate e-mail account. Follow the our remote mailbox and Internet

receive messages

dicates an unread text message, a message, data received data received through Bluetooth

age, and 1 new message mode. to open the message, essage in Inbox, scroll to it, and

ssage, select Options > Reply.


Copyright © 20

E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox with the Failed status.

Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See "Multimedia messages", on page 48.

Receive MMS and e-mail settingsYou may receive the settings in a message from your network operator or service provider. See "Data and settings", on page 44.

For availability of and subscription to data services, contact your network operator or service provider. Follow the instructions given by your service provider.Enter the MMS settings manually1 Press , and select Tools > Settings > Connection >

Access points, and define the settings for a multimedia messaging access point. See "Connection", on page 99.

2 Press , and select Messaging > Options > Settings > Multim. msg. > Access point in use and the access point you created as the preferred connection. See also "Multimedia messages", on page 48.

Before you can send, receforward e-mail, you must

• Configure an InternetSee "Connection", on

• Define your e-mail seMailbox in the Messayour e-mail account, start creating the e-mguide, select Start. SeYou must have a sepainstructions given by yservice provider (ISP).

Inbox —

In the Inbox folder, in an unread multimedi

through infrared, and connectivity.

When you receive a messare shown in the standbyselect Show. To open a mpress .

To reply to a received me

44

s many kinds of messages that

— You may receive settings from service provider, or company nt department in a configuration ttings, select Options > Save all.

e the information to Contacts, usiness card. Certificates or sound siness card are not saved.

the ringing tone, select Options >

the logo shown in the standby work operator’s own identification,

the invitation, select Options >

e the bookmark to the bookmarks ns > Add to bookmarks. If the

access point settings and data, select Options > Save all.

e tells you how many new e-mails mailbox. An extended notification nformation.



Mes

sagi

ng To print a text or a multimedia message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

Multimedia messagesImportant: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.

You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options > Retrieve.

When you open a multimedia message ( ), you may see an image and a message. is shown if sound is included, or if video is included. To play the sound or the video, select the indicator.

To see the media objects that have been included in the multimedia message, select Options > Objects.

If the message includes a multimedia presentation, is displayed. To play the presentation, select the indicator.

Data and settingYour device can receivecontain data ( ):

Configuration messageyour network operator, information managememessage. To save the se

Business card — To savselect Options > Save bfiles attached to the bu

Ringing tone — To saveSave.

Operat. logo — To havemode instead of the netselect Options > Save.

Calen. entry — To saveSave to Calendar.

Web message — To savlist in Web, select Optiomessage contains both bookmarks, to save the

E-mail notif. — The notyou have in your remotemay list more detailed i


Mes

sagi

ng

45

ed e-mail messages offline, e-mail messages offline, your

o the remote mailbox.

essagesptions > Connect to start a mailbox.

e caution when opening essages may contain

or otherwise be harmful to

en connection to a remote s > Retrieve e-mail and one of

new e-mail messages only the e-mail messages that

essages from the mailboxsages, select Cancel. e-mail messages, you can

online, or select Options > he connection and view the ne.rs:ffline or online mode) has not device.


Copyright © 20

Web service messagesWeb service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.

Mailbox

If you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also "E-mail", on page 49.

When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.

Open the mailboxWhen you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?).

To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. See also "Connection", on page 99.

To view previously retrievselect No. When you viewdevice is not connected t

Retrieve e-mail mIf you are offline, select Oconnection to the remote

Important: Exercismessages. E-mail mmalicious softwareyour device or PC.

1 When you have an opmailbox, select Optionthe following:New — to retrieve all Selected — to retrievehave been markedAll — to retrieve all mTo stop retrieving mes

2 After you retrieve thecontinue viewing themDisconnect to close te-mail messages offliE-mail status indicato

The new e-mail (obeen retrieved to your

46

ges automatically may increase e data traffic.

essagesf an e-mail message from the

ing it in the remote mailbox, . In Delete msg. from:, select

-mail headings in the remote delete the message content, the your device. If you want to remove must first delete the e-mail

ote mailbox, and then make a evice to the remote mailbox again

the device and the remote > Delete. In Delete msg. from:, r.

mail is deleted first from your connection to the remote mailbox, ed from the remote mailbox. If you ocol, messages marked to be ly after you have closed the te mailbox.



Mes

sagi

ng The new e-mail has been retrieved to your device. The e-mail message has been read, and it has not

been retrieved to your device. The e-mail message has been read. The e-mail heading has been read and the

message content has been deleted from the device.3 To open an e-mail message, press . If the e-mail

message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.

To view e-mail attachments, open a message that has the attachment indicator , and select Options > Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the device; select Options > Retrieve.

You can also receive meeting requests in the mailbox. See "Meeting requests", on page 69, and "Create calendar entries", on page 69.

To print an e-mail message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

Retrieve e-mail messages automaticallyTo retrieve messages automatically, select Options > E-mail settings > Automatic retrieval > Header retrieval > Always enabled or Only in home net., and define when and how often the messages are retrieved.

Retrieving e-mail messayour call costs due to th

Delete e-mail mTo delete the contents odevice while still retainselect Options > DeletePhone only.

The device mirrors the emailbox. Although you e-mail heading stays in the heading as well, youmessage from your remconnection from your dto update the status.

To delete an e-mail frommailbox, select Optionsselect Phone and serve

If you are offline, the e-device. During the next it is automatically deletare using the POP3 protdeleted are removed onconnection to the remo


Mes

sagi

ng

47

ers or access points may be your service provider or network t be able to change, create, edit,

sag. > Options > Settings > ollowing:

a list of all text message centers

use character conversion to when available, select Reduced

lect which message center is ages.

whether the network sends essages (network service).

t how long the message center he first attempt fails (network annot be reached within the ge is deleted from the message

e this option only if you are sure is able to convert text messages Contact your network operator.


Copyright © 20

To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options > Undelete.

Disconnect from the mailboxWhen you are online, to end the data connection to the remote mailbox, select Options > Disconnect.

View messages on a SIM cardBefore you can view SIM messages, you must copy them to a folder in your device.1 In the Messag. main view, select Options > SIM

messages.2 Select Options > Mark/Unmark > Mark or Mark all to

mark messages.3 Select Options > Copy. A list of folders opens.4 To start copying, select a folder and OK. To view the

messages, open the folder.

Messaging settingsFill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message.

Some or all message centpreset for your device by operator, and you may noor remove them.

Text messagesPress , and select MesText msg. and from the f

Message centres — Viewthat have been defined.

Character encoding — Toanother encoding systemsupport.

Msg. centre in use — Seused to deliver text mess

Receive report — Select delivery reports on your m

Message validity — Selecresends your message if tservice). If the recipient cvalidity period, the messacenter.

Message sent as — Changthat your message centerinto these other formats.

48

is a multimedia message that you imedia message center.

our home network, sending and essages may cost you more.

a retrieval > Always automatic, lly makes an active packet data he message both in and outside

elect whether you want to reject ymous sender.

ne whether you want to receive vertisements.

t whether you want the status of shown in the log (network service). ort of a multimedia message that ail address may not be possible.

Select whether you want to m sending delivery reports of ssages.

ect how long the message center the first attempt fails (network cannot be reached within the sage is deleted from the message



Mes

sagi

ng Preferred conn. — Select the connection used for sending text messages: GSM network or packet data, if supported by the network. See "Connection", on page 99.

Reply via same ctr. — Select whether you want the reply message to be sent using the same text message center number (network service).

Multimedia messagesPress , and select Messag. > Options > Settings > Multimedia message and from the following:

Image size — Define the size of the image in a multimedia message: Original (shown only when the MMS creation mode is set to Guided or Free), Small, or Large.

MMS creation mode — If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the device prevents you from sending messages that may not be supported.

Access point in use — Select which access point is used as the preferred connection for the multimedia message center.

Multimedia retrieval — Select how you want to receive multimedia messages. To receive multimedia messages automatically in your home network, select Auto. in home network. Outside your home network, you receive

a notification that therecan retrieve in the mult

When you are outside yreceiving multimedia m

If you select Multimediyour device automaticaconnection to retrieve tyour home network.

Allow anon. msgs. — Smessages from an anon

Receive adverts — Defimultimedia message ad

Receive report — Selecthe sent message to be Receiving a delivery rephas been sent to an e-m

Deny report sending —prevent your device froreceived multimedia me

Message validity — Selresends your message ifservice). If the recipientvalidity period, the mescenter.


Mes

sagi

ng

49

name for the mailbox.

the e-mail protocol that your ovider recommends. The options is setting can be selected only ged if you have saved or exited s. If you use the POP3 protocol, pdated automatically when you st e-mail messages, you must

ew connection to your mailbox.

the security option used to the remote mailbox.

he connection.

OP3 only) — Use with the POP3 nding of passwords to the

le connecting to the mailbox.

e e-mail you send, select m the following:

ter the e-mail address given to er. Replies to your messages are

ter the IP address or host name ds your e-mail. You may only be

server of your network operator. ider for more information.


Copyright © 20

E-mailPress , and select Messag. > Options > Settings > E-mail and from the following:

Mailboxes — Select a mailbox to change the following settings: Connection settings, User settings, Retrieval settings, and Automatic retrieval.

Mailbox in use — Select which mailbox you want to use for sending e-mail.

To create a new mailbox, select Options > New mailbox in the mailbox main view.

Connection settingsTo edit the settings for the e-mail you receive, select Incoming e-mail and from the following:

User name — Enter your user name, given to you by your service provider.

Password — Enter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox.

Incoming mail serv. — Enter the IP address or host name of the mail server that receives your e-mail.

Access point in use — Select an Internet access point (IAP). See "Connection", on page 99.

Mailbox name — Enter a

Mailbox type — Defines remote mailbox service prare POP3 and IMAP4. Thonce and cannot be chanfrom the mailbox settinge-mail messages are not uare online. To see the latedisconnect and make a n

Security (ports) — Selectsecure the connection to

Port — Define a port for t

APOP secure login (for Pprotocol to encrypt the seremote e-mail server whi

To edit the settings for thOutgoing e-mail and fro

My e-mail address — Enyou by your service providsent to this address.

Outgoing mail serv. — Enof the mail server that senable to use the outgoing Contact your service prov

50

efine which parts of the e-mail nly, Partially (kB), Messages

gs. & attachs..

fine how many new e-mail to the mailbox.

r IMAP4 only) — Define the folder bscribed.

or IMAP4 only) — Subscribe to ote mailbox and retrieve content

l Select whether you want to en new e-mail is received in your

automatic header retrieval cannot me.

ct whether you want the device to omatically. You can define when, sages are retrieved.

ges automatically may increase e data traffic.



Mes

sagi

ng Access point in use — Select an Internet access point (IAP). See "Connection", on page 99.

The settings for User name, Password, Security (ports), and Port are similar to the ones in Incoming e-mail.

User settingsMy name — Enter your own name. Your name replaces your e-mail address in the recipient’s device when the recipient’s device supports this function.

Send message — Define how e-mail is sent from your device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select During next conn., e-mail is sent when the connection to the remote mailbox is available.

Send copy to self — Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address.

Include signature — Select whether you want to attach a signature to your e-mail messages.

New e-mail alerts — Select whether you want to receive the new e-mail indications, a tone and a note, when new mail is received to the mailbox.

Default encoding — Select another encoding according to language.

Retrieval settingsE-mail to retrieve — Dare retrieved: Headers o(for IMAP4 only), or Ms

Retrieval amount — Demessages are retrieved

IMAP4 folder path (fopath for folders to be su

Folder subscriptions (fother folders in the remfrom those folders.

Automatic retrievaE-mail notifications —receive notifications whremote mailbox.

E-mail notifications andbe active at the same ti

Header retrieval — Seleretrieve new e-mail autand how often, the mes

Retrieving e-mail messayour call costs due to th


Mes

sagi

ng

51

saging > Options > Settings > wing:

lect whether you want to save a s, multimedia messages, or he Sent folder.

ine how many sent messages are at a time. The default limit is 20 t is reached, the oldest message

mory card is inserted in the y where you want to save your y or Memory card.


Copyright © 20

Web service messagesPress , and select Messaging > Options > Settings > Service message. Select whether you want to receive service messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically.

Cell broadcastCheck the available topics and related topic numbers with your service provider. Press , and select Messaging > Options > Settings > Cell broadcast and from the following:

Reception — Select whether you want to receive cell broadcast messages.

Language — Select the languages in which you want to receive messages: All, Selected, or Other.

Topic detection — Select whether the device automatically searches for new topic numbers, and saves the new numbers without a name to the topic list.

Other settingsPress , and select MesOther and from the follo

Save sent messages — Secopy of the text messagee-mail that you send to t

No. of saved msgs. — Defsaved to the Sent folder messages. When the limiis deleted.

Memory in use — If a medevice, select the memormessages: Phone memor

52

he search field. Matching contacts . Select the call type Voice call.

acts from your SIM card to n make a call this way. See "Copy

x (network service), press and hold . See also "Call divert", on

e phone number of your voice , and select Tools > Voic. mail > e number. Enter the number ur service provider), and select OK.

number in the standby mode, press er you want, and press to call

nce callrst participant.other participant, select Options > all is automatically put on hold.answered, to join the first participant ll, select Options > Conference.



Mak

e ca

lls Make callsVoice calls

Tip! To increase or decrease the volume during a call, press or . If you have set the volume to Mute, you cannot adjust the volume with the or keys. To adjust the volume, select Unmute, and press or .

You can make voice calls in the Fold open mode and View mode. See "Modes", on page 8.

1 To start a voice call, in the Fold open mode, enter the phone number in the standby mode, including the area code. To remove a number, press . For international calls, press twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.

2 Press to call the number.3 Press to end the call (or to cancel the call

attempt).

Pressing always ends a call, even if another application is active.

To make a call from Contacts, press , and select Contacts. Scroll to the desired name, or enter the first

letters of the name to tare listed. To call, press

You must copy the contContacts before you cacontacts", on page 63.

To call your voice mailboin the standby mode

page 105.

Tip! To change thmailbox, press Options > Chang(obtained from yo

To call a recently dialed . Scroll to the numb

the number.

Make a confere1 Make a call to the fi2 To make a call to an

New call. The first c3 When the new call is

in the conference ca


Mak

e ca

lls

53

anced voice commands. s are not dependent on the

ot record voice tags in advance. s a voice tag for the entries in he spoken voice tag to it. The evice adapts to the main user’s ice commands better.

ct is the name or nickname that ard. To listen to the synthesized card, and select Options > Play

oice tagtags may be difficult in a noisy ing an emergency, so you should n voice dialing in all

ng, the loudspeaker is in use. t distance away when you say

in the standby mode, press and sing a compatible headset with and hold the headset key to start


Copyright © 20

To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself.To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. When you finish the private conversation, select Options > Add to conference to return to the conference call.To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop.

4 To end the active conference call, press .

Speed dial a phone numberTo activate speed dialing, press , and select Tools > Settings > Call > Speed dialling > On.

To assign a phone number to one of the speed dialing keys ( — ), press , and select Tools > Spd. dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign. is reserved for the voice mailbox.

To call in the standby mode, press the speed dial key and .

Voice dialingYour device supports enhEnhanced voice commandspeaker’s voice; you do nInstead, the device createcontacts, and compares tvoice recognition in the dvoice to recognize the vo

The voice tag for a contais saved on the contact cvoice tag, open a contactvoice tag.

Make a call with a vNote: Using voice environment or durnot rely solely upocircumstances.

When you use voice dialiHold the device at a shorthe voice tag.1 To start voice dialing,

hold . If you are uthe headset key, pressvoice dialing.

54

eo call, you must have a USIM card f a UMTS network. For availability ideo call services, contact your vice provider. A video call can only arties. The video call can be made hone or an ISDN client. Video calls ere is another voice, video, or data

ng video (the recipient is not twork is not transmitting it). ideo sending from your device. To d, see "Call settings", on page 98. in the er the e lect tact.ll >

tivate call he call.



Mak

e ca

lls 2 A short tone is played, and Speak now is displayed. Say clearly the name or nickname that is saved on the contact card.

3 The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a timeout of 2.5 seconds, the device dials the number.If the recognized contact was not correct, select Next to view a list of other matches, or Quit to cancel voice dialing.

If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise the device selects the first available number of the following: Mobile, Mobile (home), Mobile (business), Telephone, Tel. (home), and Tel. (business).

Video callsYou can make video calls in the Fold open mode and View mode. See "Modes", on page 8.

For hands-free video calls, use the View mode.

When you make a video call, you can see a real-time, two-way video between you and the recipient of the call. The live video image, or video image captured by the camera in your device is shown to the video call recipient.

To be able to make a vidand be in the coverage oof and subscription to vnetwork operator or serbe made between two pto a compatible mobile pcannot be made while thcall active.

Icons: You are not receivi

sending video or the ne You have denied v

send a still image instea1 To start a video call,

Fold open mode, entphone number in thstandby mode, or seContacts and a con

2 Select Options > CaVideo call.

If you want to make a hands-free video call, acthe View mode after therecipient has answered t


Mak

e ca

lls

55

(network service)d live video or a video clip from ther compatible mobile device

y invite a recipient to view the you want to share. Sharing n the recipient accepts the te the correct mode. See "Share

uirementsquires a 3G Universal Mobile em (UMTS) connection, your ng depends on 3G network service provider for questions y and fees associated with using ideo sharing you must:ring is installed on your Nokia

e is set up for person-to-person tings", on page 56.tive UMTS connection and are coverage. See "Settings", on he sharing session while you are coverage and a handover to ng session is discontinued, but ues.


Copyright © 20

Starting a video call may take a while. Waiting for video image is shown. If the call is not successful (for example, video calls are not supported by the network, or the receiving device is not compatible) you are asked if you want to try a normal call or send a message instead.

The video call is active when you see two video images, and hear the sound through the loudspeaker. The call recipient may deny video sending ( ), in which case you hear the sound and may see a still image or a grey background graphic.

Tip! To increase or decrease the volume during a call, scroll left or right.

To change between showing video or hearing only sound, select Enable/Disable > Sending video, Sending audio, or Sending audio & video.

To zoom your own image, select Zoom in or Zoom out. The zoom indicator is shown on the top of the display.

To switch the places of the sent and received video images on the display, select Change image order.

Even if you have denied video sending during a video call, the call will still be charged as a video call. Check the pricing with your network operator or service provider.

To end the video call, press .

Video sharing Use Video sharing to senyour mobile device to anoduring a voice call. Simpllive video, or a video clip begins automatically wheinvitation, and you activavideo", on page 56.

Video sharing reqBecause Video sharing reTelecommunications Systability to use Video shariavailability. Contact yourabout network availabilitthis application. To use V• Ensure that Video sha

N93.• Ensure that your devic

connections. See "Set• Ensure you have an ac

within UMTS networkpage 56. If you start twithin UMTS networkGSM occurs, the shariyour voice call contin

56

name (you can use an IP address e).

ings

nnection, do the following: provider to establish an o use the UMTS network.ice UMTS access point connection red properly. For help, see ge 99.

sion, the recipient must install igure the required settings on their the recipient must both be before you can start sharing.

ons, you must be registered to the UMTS connection, and be within rage.

active, select Options > Share

invitation to the SIP address you ontact card of the recipient.



Mak

e ca

lls • Ensure that both the sender and recipient are registered to the UTMS network. If you invite someone to a sharing session and that person’s phone is turned off, or the person is not within UMTS network coverage, they do not know that you are sending an invitation. However, you receive an error message that the recipient cannot accept the invitation.

SettingsPerson-to-person connection settings

A person-to-person connection is also known as a Session Initiation Protocol (SIP) connection. The SIP profile settings must be configured in your device before you can use Video sharing. Setting up a SIP profile allows you to establish a live person-to-person connection to another compatible phone. The SIP profile must also be established to receive a sharing session.

Ask your network operator or service provider for the SIP profile settings, and save them in your device. Your network operator or service provider may send you the settings over the air.

If you know a recipient’s SIP address, you can enter it on your contact card for that person. Open Contacts from your device main menu, and open the contact card (or start a new card for that person). Select Options > Add detail > SIP. Enter the SIP address in the format

sip:username@domaininstead of a domain nam

UTMS connection sett

To set up your UMTS co• Contact your service

agreement for you t• Ensure that your dev

settings are configu"Connection", on pa

Share videoTo receive a sharing sesVideo sharing and confmobile device. You and registered to the service

To receive share invitatiservice, have an active the UMTS network cove

Live video1 When a voice call is

video > Live.2 The phone sends the

have added to the c


Mak

e ca

lls

57

e recipient is not available, enter K to send the invitation.

atically when the recipient . the sharing session. Select o resume sharing.sion, select Stop. To end the d key.

ion a share invitation, an invitation

wing the sender’s name or SIP not set to Silent, it rings when

hare invitation and you are not erage, you will not know that .

tation, you can select:haring session. If the sender eo, activate the View mode.

invitation. The sender receives a cted the invitation. You can also ecline the sharing session and all.

n, select Stop. If you share a eo sharing ended is displayed.


Copyright © 20

If the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation. If the SIP address of the recipient is not available, enter a SIP address. Select OK to send the invitation.

3 Sharing begins automatically when the recipient accepts the invitation.The loudspeaker is active. You can also use a headset to continue your voice call while you share live video.

4 Select Pause to pause the sharing session. Select Continue to resume sharing.

5 To end the sharing session, select Stop. To end the voice call, press the end key.

Video clip1 When a voice call is active, select Options > Share

video > Clip.A list of video clips opens.

2 Select a video clip you want to share. A preview view opens. To preview the clip, select Options > Play.

3 Select Options > Invite.You may need to convert the video clip into a suitable format to be able to share it. Clip must be converted for sharing. Continue? appears. Select OK.The phone sends the invitation to the SIP address you have added to the contact card of the recipient. If the recipient has several SIP addresses in the contact card, select the SIP address to which you want to send the invitation, and Select to send the invitation.

If the SIP address of tha SIP address. Select O

4 Sharing begins automaccepts the invitation

5 Select Pause to pauseOptions > Continue t

6 To end the sharing sesvoice call, press the en

Accept an invitatWhen someone sends youmessage is displayed shoaddress. If your device is you receive an invitation.

If someone sends you a swithin UMTS network covyou received an invitation

When you receive an invi• Accept to begin the s

wants to share live vid• Reject to decline the

message that you rejepress the end key to ddisconnect the voice c

To end the sharing sessiovideo clip, select Exit. Vid

58

t a video calls, is displayed.

n a ringing tone for video calls. ct Tools > Profiles, a profile, and alise > Video call tone.

press to answer the video call.

ctivate the View mode, and a live ideo clip, or the image being in your device is shown to the nd a live video image, turn the tion from which you want to send do not activate the View mode, ssible, but you can still hear the een is shown in place of the video. en with a still image, see "Call o call, on page 98.

have denied video sending during all is still charged as a video call. with your network operator or

the View mode or in the Fold open



Mak

e ca

lls Answer or reject a callTo answer the call in the Fold open mode, press . If Anykey answer is set to On, to answer a call in the Fold closed mode, open the fold, and the call starts automatically. Otherwise, open the fold, and press .

To mute the ringing tone when a call comes in, select Silence.

Tip! If a compatible headset is connected to the device, to answer and end a call, press the headset key.

If you do not want to answer a call, in the Fold open mode, press to reject it. The caller hears a line busy tone. If you have activated the Call divert > If busy function to divert calls, rejecting an incoming call also diverts the call. See "Call divert", on page 105.

When you reject an incoming call in the Fold open mode, you can also send a text message to the caller informing why you cannot answer the call. Select Options > Send msg.. You can edit the text before sending it. To set up this option and write a standard text message, see "Call settings", on page 98.

If you answer a voice call during a video call, the video call is dropped. Call waiting is not available during a video call.

Answer or rejecWhen a video call arrive

Tip! You can assigPress and seleOptions > Person

In the Fold open mode,

To start sending video, avideo image, recorded vcaptured by the cameracaller. If you want to secamera unit to the directhe video image. If you video sending is not poother person. A grey scrTo replace the grey scresettings", Image in vide

Note: Even if youa video call, the cCheck the pricingservice provider.

To end the video call, inmode, press .


Mak

e ca

lls

59

works only) — To send an image a message to the other u can edit the message and re sending. Press to send evice.

MF tone strings, for example, a string or search for it in character (w) or a pause peatedly. Select OK to send the

MF tones to the Phone number contact card.

video callideo call for the following e (audio in the Fold open mode; e View mode); Activate handset th connectivity is attached);

vate handsfree (Fold open mode h Bluetooth connectivity is l; Change image order Zoom in/ly); and Help.


Copyright © 20

Call waiting (network service)You can answer a call while you have another call in progress if you have activated Call waiting in Tools > Settings > Call > Call waiting.

To answer the waiting call, press . The first call is put on hold.

To switch between the two calls, select Swap. Select Options > Transfer to connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls. To end the active call, press . To end both calls, select Options > End all calls.

Options during a voice callMany of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer, Reject, Swap, Hold or Unhold, Activate handset, Activate loudsp., or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End active call or End all calls, New call, Conference, and Transfer. Select from the following:

Replace — To end an active call and replace it by answering the waiting call.

Send MMS (in UMTS netor a video in a multimediparticipant of the call. Yochange the recipient befothe file to a compatible d

Send DTMF — To send DTpassword. Enter the DTMFContacts. To enter a waitcharacter (p), press retone.

Tip! You can add DTor DTMF fields in a

Options during aSelect Options during a voptions: Enable or Disablvideo, audio, or both in th(if a headset with BluetooActivate loudsp.; or Actionly, and if a headset witattached); End active calZoom out (View mode on

60

call duration while a call is active, Options > Settings > Show call

time invoiced for calls by your ay vary, depending on network

g off for billing, and so forth.

mers, select Options > Clear d the lock code; see "Security", ge 102.

data sent and received during , press , and select Menu > My ta. For example, you may be data connections by the amount d.

munication events

ation events



Mak

e ca

lls Log

Recent calls To monitor the phone numbers of missed, received, and dialed calls, press , and select Menu > My own > Log > Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area.

Tip! When you see a note in the standby mode about missed calls, select Show to access the list of missed calls. To call back, scroll to a name or number, and press .

To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press .

Call duration To monitor the approximate duration of your incoming and outgoing calls, press , and select Menu > My own > Log > Call duration.

To set the display of theselect Connect. > Log >duration > Yes or No.

Note: The actualservice provider mfeatures, roundin

To clear call duration titimers. For this you nee"Phone and SIM", on pa

Packet dataTo check the amount ofpacket data connectionsown > Log > Packet dacharged for your packetof data sent and receive

Monitor all comIcons in Log:

Incoming Outgoing Missed communic


Mak

e ca

lls

61

tions > Filter and a filter.

he log, recent calls register, and s permanently, select Options > onfirm. To remove a single event

elect Options > Settings > Log remain in the phone memory for r which they are automatically you select No log, all the log ister, and messaging delivery eleted.

ommunication event, in the an event, and press the scroll key.

iew, to copy a phone number to t Options > Copy Number.

connection timer: To view how ilobytes, is transferred and how a connection lasts, scroll to an nt indicated by Pack., and select


Copyright © 20

To monitor all voice and video calls, text messages, or data connections registered by the device, press , select Menu > My own > Log, and scroll to the right to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event and create new contact cards based on the log information.

Tip! To see the duration of a voice call on the main display during an active call, select Options > Settings > Show call duration > Yes.

Tip! To view a list of sent messages, press , and select Messaging > Sent.

Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging center, or Web pages are shown as packet data connections.

To filter the log, select Op

To erase the contents of tmessaging delivery reportClear log. Select Yes to cfrom the log, press .

To set the Log duration, sduration. The log events a set number of days afteerased to free memory. Ifcontents, recent calls regreports are permanently d

To view the details of a cgeneral log view, scroll to

Tip! In the details vthe clipboard, selec

Packet data counter andmuch data, measured in klong a certain packet datincoming or outgoing eveOptions > View details.

62

it contact cards, use Nokia ailable in Nokia PC Suite.

nail image to a contact card, open lect Options > Edit > Options > mbnail image is shown when the

is a quick way to call frequently u can assign speed dialing keys to ers. See "Speed dial a phone 53.

ct information, select the card you ct Options > Send > Via text timedia, Via Bluetooth, or Via ssaging", on page 39 and "Send oth connectivity", on page 80.

roup, select Options > Add to ou have created a group). See , on page 64.

ontacts, groups, and the available lect Options > Contacts info.



Cont

acts

(Ph

oneb

ook) Contacts (Phonebook)

Press , and select Contacts. In Contacts you can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See "Data and settings", on page 44. Contact information can only be sent to or received from compatible devices.

Save names and numbers1 Select Options > New contact.2 Fill in the fields that you want, and select Done.

To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit.

Tip! To print contact cards on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

To delete a contact card in Contacts, select a card, and press . To delete several contact cards at the same time, press and to mark the contacts, and press to delete.

Tip! To add and edContacts Editor av

To attach a small thumbthe contact card, and seAdd thumbnail. The thucontact calls.

Tip! Speed dialingused numbers. Yoeight phone numbnumber", on page

Tip! To send contawant to send. Selemessage, Via mulinfrared. See "Medata using Blueto

To add a contact to a ggroup: (shown only if y"Create contact groups"

To view the amount of cmemory in Contacts, se


Cont

acts

(Ph

oneb

ook)

63

onize your contacts to a Nokia PC Suite.

d other SIM servicesation on using SIM card card vendor. This may be the

operator, or other vendor.

acts > Options > SIM y to see the names and numbers the SIM directory you can add, ontacts, and you can make calls.

aling numbers, select Options > alling contacts. This setting is y your SIM card.

evice to selected phone numbers, ixed dialling. To add new ing list, select Options > New e PIN2 code for these functions.

ing, packet data connections are sending text messages over a n this case, the message center ’s phone number must be ling list.

ated, calls may be possible to the er programmed into your device.


Copyright © 20

Default numbers and addressesYou can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing.

1 In the address book, select a contact, and press .2 Select Options > Defaults.3 Select a default to which you want to add a number or

an address, and select Assign.4 Select a number or an address you want to set as a default.

The default number or address is underlined in the contact card.

Copy contactsTo copy names and numbers from a SIM card to your device, press , and select Contacts > Options > SIM contacts > SIM directory. Select the names you want to copy and Options > Copy to Contacts.

To copy contacts to your SIM card, press , and select Contacts. Select the names you want to copy and Options > Copy to SIM direct., or Options > Copy > To SIM directory. Only the contact card fields supported by your SIM card are copied.

Tip! You can synchrcompatible PC with

SIM directory anFor availability and informservices, contact your SIMservice provider, network

Press , and select Contcontacts > SIM directorstored on the SIM card. Inedit, or copy numbers to c

To view the list of fixed diSIM contacts > Fixed dionly shown if supported b

To restrict calls from your dselect Options > Activ. fnumbers to the fixed dialSIM contact. You need th

When you use Fixed diallnot possible, except whenpacket data connection. Inumber and the recipientincluded on the fixed dia

When fixed dialing is activofficial emergency numb

64

e contacts to the group.

ct Options > Rename, enter the K.

rs from a groupen the group you want to modify.

t, and select Options > Remove

e the contact from the group.hich groups a contact belongs, ct, and select Options > Belongs



Cont

acts

(Ph

oneb

ook) Add ringing tones for contacts

When a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your device recognizes it).1 Press to open a contact card or go to the groups

list, and select a contact group.2 Select Options > Ringing tone. A list of ringing tones

opens.3 Select the ringing tone you want to use for the

individual contact or the selected group.

You can also use a video clip as a ringing tone.

To remove the ringing tone, select Default tone from the list of ringing tones.

Create contact groups1 In Contacts, press to open the groups list.2 Select Options > New group. 3 Write a name for the group or use the default name

Group, and select OK. 4 Open the group, and select Options > Add members.5 Scroll to a contact, and press to mark it. To add

multiple members at a time, repeat this action on all the contacts you want to add.

6 Select OK to add th

To rename a group, selenew name, and select O

Remove membe1 In the groups list, op2 Scroll to the contac

from group.3 Select Yes to remov

Tip! To check to wscroll to the contato groups.


Web

65

> Settings > Connection > fine the settings for an access uctions given to you by your Connection", on page 99.ervices > Options > Bookmark mark. Write a name for the ress of the page defined for the

ess point as the default access > Settings > Access point.

ws when you open Services.

e bookmarks loaded for sites not ia does not warrant or endorse

to access them, you should take security or content, as you site.

page defined for the default


Copyright © 20

WebVarious service providers maintain pages specifically designed for mobile devices. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).

Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.

Press , and select Services.

Shortcut: To start a connection, press and hold in the standby mode.

Web access pointTo access pages, you need Web service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the Web page. See "Data and settings", on page 44. For more information, contact your network operator or service provider.

Tip! Settings may be available on the Web site of a network operator or service provider.

Enter settings manually1 Press , select Tools

Access points, and depoint. Follow the instrservice provider. See "

2 Press , and select Smanager > Add bookbookmark and the addcurrent access point.

3 To set the created accpoint, select Options

Bookmarks vieThe bookmarks view open

Your device may have somaffiliated with Nokia. Nokthese sites. If you choosethe same precautions, forwould with any Internet

indicates the startingaccess point.

66

links appear underlined in blue nks in purple. Images that act as around them.

selections, press .

to jump to the end of a page and g of a page.

ge while browsing, select Back. If lect Options > Navigation w a chronological list of the pages wsing session.

ntent from the server, select options > Reload.

ect Options > Save as bookmark.

bookmarks view while browsing, . To return to the browser view, ack to page.

wsing, select Options > Advanced ou can save pages to the device d (if inserted), and browse them the pages later, press in the the Saved pages view.

ress, select Options > Navigation ddress.



Web Connection security

If the security indicator is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted.

The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.

Select Options > Details > Security to view details about the connection, encryption status, and information about server and user authentication.

Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also "Certif. management", on page 104.

BrowseImportant: Use only services that you trust and that offer adequate security and protection against harmful software.

To download a page, select a bookmark, or enter the address in the field ( ).

On a browser page, newand previously visited lilinks have a blue border

To open links and make

Shortcut: Useto the beginnin

To go to the previous paBack is not available, seoptions > History to vieyou visited during a bro

To retrieve the latest coOptions > Navigation

To save a bookmark, sel

Tip! To access thepress and hold select Options > B

To save a page while brooptions > Save page. Ymemory or memory carwhen offline. To accessbookmarks view to open

To enter a new URL addoptions > Go to web a


Web

67

stall and use applications and m sources that offer adequate ction against harmful software.

, scroll to the link, and press . option to purchase the item, for

information provided.oad, select Accept. To cancel the cel.

ond view the browser page offline, ed options > Disconnect, or to lose the browser, select

es you have accessed are stored he device.

tion that is used to store data ried to access or have accessed requiring passwords, empty the information or services you have e cache. To empty the cache, ed options > Clear cache.


Copyright © 20

To open a sublist of commands or actions for the currently open page, select Options > Service options.

You can download files that cannot be shown on the browser page, such as ringing tones, images, operator logos, themes, and video clips. To download an item, scroll to the link, and press .

When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed. You can also view the list by selecting Options > Tools > Downloads. In the list, scroll to an item, and select Options to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads.


Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.

Download and purchase itemsYou can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device, for example, a downloaded photo can be saved in Gallery.

Important: Only inother software frosecurity and prote

1 To download the item2 Select the appropriate

example, “Buy”.3 Carefully read all the

To continue the downldownload, select Can

End a connectiTo end the connection anselect Options > Advancend the connection and cOptions > Exit.

Empty the cacheThe information or servicin the cache memory of t

A cache is a memory locatemporarily. If you have tconfidential information cache after each use. The accessed are stored in thselect Options > Advanc

68

e home page.

Web page that is downloaded tion options > Open search page or when browsing.

the browser to play sounds s, select a volume level.

t the page layout shown as hen in the Small screen mode, do not want external cascading loaded, select By speed.

able the receiving and sending of

able or disable the use of scripts.

ide or show security notifications.

Select whether you want to e sends DTMF tones during a voice uring a voice call", on page 59.



Web Web settings

Select Options > Settings and from the following:

Access point — Change the default access point. See "Connection", on page 99. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.

Load imgs. & sounds — Select whether you want to load images while browsing. If you select No, to load images later during browsing, select Options > Show images.

Font size — Select the text size.

Default encoding — If text characters are not shown correctly, you can select another encoding according to language.

Auto. bookmarks — Enable or disable automatic bookmark collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder.

Screen size — Select what is shown when you are browsing: Select. keys only or Full screen.

Homepage — Define th

Search page — Define awhen you select Navigain the bookmarks view,

Volume — If you want embedded on Web page

Rendering — If you wanaccurately as possible wselect By quality. If youstyle sheets to be down

Cookies — Enable or discookies.

Java/ECMA script — En

Security warnings — H

Conf. DTMF sending —confirm before the deviccall. See also "Options d


Cale

ndar

69

ind you of birthdays or special ated every year)

u of a task that needs doing by a

t an alarm, select Alarm > On, ime and Alarm date.

or an appointment or a meeting, description.ct Done.

s for a note, select Silence to m tone. The reminder text stays calendar alarm, select Stop. To elect Snooze.

onize your calendar with a Nokia PC Suite. When creating

t the desired Synchronisation

stsequest to the mailbox in your d to the calendar when you open


Copyright © 20

CalendarUse Calendar to remind you of meetings, anniversaries, and to keep track of your tasks and other notes.

Create calendar entriesShortcut: In the day, week, or month calendar view, press any key ( — ). An appointment entry opens, and the characters you enter are added to the Subject field. In the to-do view, a to-do note entry opens.

1 Press , and select Calendar > Options > New entry and one of the following:Meeting — to remind you of an appointment that has a specific date and timeMeeting req. — to send a meeting request by e-mail (a mailbox must be defined in the device)Memo — to write a general entry for a day

Anniversary — to remdates (entries are repeTo-do — to remind yospecific date

2 Fill in the fields. To seand enter the Alarm tTo add a description fselect Options > Add

3 To save the entry, sele

When the calendar alarmturn off the calendar alaron the screen. To end theset the alarm to snooze, s

Tip! You can synchrcompatible PC usinga calendar entry, seoption.

Meeting requeIf you receive a meeting rdevice, the request is savethe e-mail.

70

calendar entries Calendar saves space in your

e event at a time, go to the month s > Delete entry > Before date or

leted, scroll to it in the to-do view, ark as done.

ings alarm tone, Default view, Week itle, and select Options > Settings.



Cale

ndar You can view received meeting requests in the mailbox or

in the calendar. To respond to a meeting request using e-mail, select Options > Respond.

Calendar viewsTip! Select Options > Settings to change the starting day of the week or the view that is shown when you open the calendar.

In the month view, dates that have calendar entries are marked with a small triangle in the bottom right corner. In the week view, memos and anniversaries are placed before 8 a.m. To switch between the month view, week view, day view, and to-do view, press .

To go to a certain date, select Options > Go to date. To jump to today, press .

To send a calendar note to a compatible device, select Options > Send.

To print calendar entries on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.

Manage your Deleting past entries indevice memory.

To delete more than onview, and select OptionAll entries.

To mark a task as compand select Options > M

Calendar settTo modify the Calendarstarts on, Week view t


My

own

71

to the Visual Radio service, the ns in your area may not support

adio service may not be available .

an antenna other than the A compatible headset or attached to the device for the erly.

io with the built-in loudspeaker When using the loudspeaker, d in the device. The lead of the antenna of the radio, so let it

o music at a moderate level. re to high volume may damage

ot hold the device near your ear ker is in use, because the volume loud.

swer an incoming call while radio is turned off when there is all is finished, the radio is turned


Copyright © 20

My ownVisual Radio (network service)

You can use the Visual Radio application as a traditional FM radio with automatic tuning and saved stations. If you tune to stations that offer Visual Radio service, you can view visual information on the display related to the radio program. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications.

To use the Visual Radio service, the following conditions are required:• The device must be switched on.• The device must have a valid SIM card inserted.• The station you listen to and the network operator you

use must support this service.• An Internet access point must be defined to access the

operator’s visual radio server. See "Access points", on page 99.

• The station must have the correct Visual Radio service ID defined and Visual Radio service enabled. See "Saved stations", on page 73.

If you do not have accessoperators and radio statioVisual Radio. The Visual Rin all areas and countries

The FM radio depends onwireless device antenna. enhancement needs to beFM radio to function prop

You can listen to the rador a compatible headset.keep the headset pluggeheadset functions as thehang freely.

Warning: Listen tContinuous exposuyour hearing. Do nwhen the loudspeamay be extremely

You can make a call or anlistening to the radio. Thean active call. When the cback on.

72

ed list,

t of ect e e 73.

y radio nd, n

.

ent costs, and to subscribe to the

twork operator or service provider.

content for a tuned station, select view, select Options > Station > the visual service ID has not been ter it, or select Retrieve to search ctory (network service).

the visual service is established, urrent visual content designed by



My

own The radio selects the used frequency band based on the

country information received from the network.

Visual Radio can be used for listening when the device cover is closed. Channel information may be displayed on the cover display. To mute or unmute the radio, press the cover key.

Listen to the radioNote that the quality of the radio broadcast depends on the coverage of the radio station in that particular area.

Connect a compatible headset to the device. The lead of the headset functions as the radio antenna, so let it hang freely. Press , and select Menu > My own > Radio.

To start a station search, select or . Searching stops when a station is found. To change the frequency manually, select Options > Manual tuning.

If you have previously saved radio stations, select or to go to the next or previous saved station. To select

the memory location of a station, press the corresponding number key.

To adjust the volume, press or . To listen to the radio using the loudspeaker, select Options > Activate loudspeaker.

To view available stations based on location, select Options > Station directory (network service).

To save the current tunstation to your station select Options > Save station. To open the lisyour saved stations, selOptions > Stations. Se"Saved stations", on pag

To return to the standbmode and leave the FMplaying in the backgrouselect Options > Play ibackground, or press

View visual contTo check availability andservice, contact your ne

To view available visual, or in the stations

Start visual service. If saved for the station, enfor it in the station dire

When the connection tothe display shows the cthe content provider.


My

own

73

er

u > My own > RealPlyr.. With deo clips or stream media files vate a streaming link when you re it in the device memory or a

(if inserted).

ew video clips or streaming links other compatible UPnP devices, through wireless LAN. See "View e 86.

ith extensions such as .3gp, alPlyr. does not necessarily

all the variations of file formats. empts to open all .mp4 files, but de content that is not compliant , therefore, is not supported by

ored in device memory or on the ed), select Options > Open and

o play one of the last six files

file saved in Gallery 28.


Copyright © 20

To adjust display settings for the visual content view, select Options > Display settings > Lighting or Power saver time-out.

Saved stationsYou can save up to 20 radio stations in Visual Radio. To open your station list, select Options > Stations.

To listen to a saved station, select Options > Station > Listen. To view available visual content for a station with Visual Radio service, select Options > Station > Start visual service.

To change station details, select Options > Station > Edit.

SettingsSelect Options > Settings and from the following:

Start-up tone — To select a tone to play when the application is started.

Auto-start service — To have the Visual Radio service start automatically when you select a saved station that offers visual service, select Yes.

Access point — To select the access point used for the data connection. You do not need an access point to use the application as an ordinary FM radio.

RealPlay

Press , and select MenRealPlyr., you can play viover the air. You can actibrowse Web pages, or stocompatible memory card

Tip! You can also viin your device with such as a TV or a PC,media files", on pag

RealPlyr. supports files w.mp4, or .rm. However, Resupport all file formats orFor example, RealPlyr. attsome .mp4 files may incluwith 3GPP standards andthis device.

Play video clips1 To play a media file st

memory card (if insertfrom the following:Most recent clips — tplayed in RealPlyr.Saved clip — to play aSee "Gallery", on page

74

yer settingsyr. settings in a special text ork operator or service provider. , on page 44. For more information, perator or service provider.

yer settingsgs and from the following:

r. automatically repeat video clips .

whether to use a proxy server, ss point, and set the port range Contact your service provider for

roxy server, select Yes.

ter the IP address of the proxy server.

nter the port number of the proxy

rvers are intermediate servers rvers and their users. Some service to provide additional security or

browser pages that contain sound



My

own 2 Scroll to a file, and press to play the file.

Tip! To view a video clip in full screen mode, press . Press again to change back to normal screen

mode.

Shortcuts during play:• To fast forward, press and hold .• To rewind through the media file, press and hold .• To mute the sound, press and hold until is

displayed. To turn on the sound, press and hold until you see .

Stream content over the airMany service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point.

The access points may be configured when you first start your device.

Contact your service provider for more information.

In RealPlyr., you can only open an rtsp:// URL address. However, RealPlyr. recognizes an http link to a .ram file.

To stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device.

Receive RealPlaYou may receive RealPlmessage from the netwSee "Data and settings"contact your network o

Change the RealPlaSelect Options > Settin

Video — to have RealPlyafter they finish playing

Connection — to selectchange the default acceused when connecting. the correct settings.

Proxy sett.:

Use proxy — To use a p

Proxy serv. address — En

Proxy port number — Eserver.

Glossary: Proxy sebetween media seproviders use themspeed up access toor video clips.


My

own

75

mpatible device, scroll to it, and

ther folder, select Organise >

other folder, select Organise >

nize your flash files, select

y vary.

ll to it, and press .

u > My own > Flash Player. ress .

the following:

available in all flash files.ayback.ack.playback volume. To increase or croll left or right.playback quality.rs uneven and slow, change the rmal or Low.


Copyright © 20

Netw. sett.:

Default access point — Scroll to the access point you want to use to connect to the Internet, and press .

Online time — Set the time for RealPlyr. to disconnect from the network when you pause a media clip playing through a network link. Select User defined, and press . Enter the time, and select OK.

Lowest UDP port — Enter the lowest port number of the server’s port range. The minimum value is 1024.

Highest UDP port — Enter the highest port number of the server’s port range. The maximum value is 65535.

Select Options > Advanced settings to edit the bandwidth values for different networks.

Flash Player

With Flash Player, you can view, play, and interact with flash files made for mobile devices.

Organise flash filesPress , and select Menu > My own > Flash Player. Scroll right.

To open a folder or play a flash file, scroll to it, and press .

To send a flash file to a copress .

To copy a flash file to anoCopy to folder.

To move a flash file to anMove to folder.

To create a folder to orgaOrganise > New folder.

The available options ma

To delete a flash file, scro

Play flash filesPress , and select MenScroll to a flash file and p

Select Options and from

Note: Options may not be• Pause to pause the pl• Stop to stop the playb• Volume to adjust the

decrease the volume s• Quality to select the

If the playback appeaQuality setting to No

76

vee with and select Options > e. muvee from the style list. Movie

usic and text associated with the

e.

tomatically and a Preview view is t Save to save the muvee in the ffle the media files and create a ck to select a different style for so select Customise to change the ate a custom muvee to which you and text.

muveer main view, select the videos and

create a muvee with and select uvee, or select the Images & video lect the videos and images you vee with and select Options > e. muvee from the style list. In the tions > Customise. Select from

music clip from the list.he Opening message and Closing



My

own • Full screen to play the file using the entire display. To

return to the normal screen, select Normal screen.Even though not visible in full screen, the key functions may still be available when you press either key below the display.

• Fit to screen to play the file in its original size after zooming it.

• Pan mode on to be able to move around the display with the scroll key when you have zoomed in.

The available options may vary.

Movie director

Press , and select Menu > My own > Movie, or launch it from the gallery. Muvees are styled video clips that can contain videos, images, music, and text. The style determines the transitions, visual effects, graphics, music, and text that are used in the muvee.

Create muvees1 In the Movie director main view, select the videos and

images you want to create a muvee with and select Options > Create muvee, or open the Images & video folder in Gallery. Select the video clips and images you

want to create a muEdit > Create muve

2 Select a style for thedirector uses the mchosen style.

3 Select Create muve

The muvee is created audisplayed. You can selecGallery, Recreate to shunew muvee, or press Bayour muvee. You can almuvee settings and crecan add images, music,

Create a custom1 In the Movie directo

images you want toOptions > Create mfolder in Gallery. Sewant to create a muEdit > Create muve

2 Select a style for thestyle view, select Opthe following:Music — to select aMessage — to edit tmessage.


My

own

77

matically and a Preview view is Save to save the muvee in the fle the media files and create a to return to the muvee settings.

u > My own and a game. For ay the game, select Options >


Copyright © 20

Videos & Images — select from the following:• Add/Remove to add or remove video clips and

images, or Add/Remove > Capture to open the camera application to capture new video clips and images.

• Move to reorder the position of video clips and images in the custom muvee.

• Select contents to select video segments to include/exclude in the muvee.

Length — to define the duration of the muvee, select User defined. Select Multimedia message, Same as music, or Auto-select. If the muvee duration is less than the music duration, the muvee is repeated to match the music duration. If the muvee duration is longer than the music duration, the music is repeated to match the muvee duration.Settings — to change the settings for muvee production. Select from the following:• Memory in use — select where to store your muvees.• Resolution — select the resolution of your muvees.• Default muvee name — set a default name for the

muvees.

3 Select Create muvee.

The muvee is created autodisplayed. You can selectGallery, Recreate to shufnew muvee, or Customise

GamesPress , and select Meninstructions on how to plHelp.

78

aging Profile, SIM Access profile, evice Profile. To ensure n other devices supporting se Nokia approved enhancements ith the manufacturers of other eir compatibility with this device.

corresponds to a service or a es how different devices connect. andsfree Profile is used between

ce and the phone. For devices to be ust support the same profiles.

s on using Bluetooth technology in ith your local authorities or service

h technology, or allowing such ackground while using other emand on battery power and

ed, you cannot use Bluetooth rity", on page 102 for more the device.



Conn

ectiv

ity ConnectivityBluetooth connectivity

You can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); and connect to a compatible printer to print images with Image print. See "Image print", on page 37.

Since devices with Bluetooth technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices.

This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: Basic Printing Profile, Generic Access Profile, Serial Port Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Generic Object Exchange Profile, Object Push Profile, File

Transfer Profile, Basic Imand Human Interface Dinteroperability betweeBluetooth technology, ufor this model. Check wdevices to determine th

Glossary: A profilefunction, and definFor example, the Hthe handsfree devicompatible, they m

There may be restrictionsome locations. Check wprovider.

Features using Bluetootfeatures to run in the bfeatures, increase the dreduce the battery life.

When the device is lockconnectivity. See "Secuinformation on locking


Conn

ectiv

ity

79

sscode, and set the other device evices", on page 80. Activate the e other device.

de is on in your Nokia N93, in the standby mode. The s network is turned off, as nal strength indicator area, and

services or features requiring . However, a wireless LAN e during the remote SIM mode.

emote SIM mode, you cannot y calls with your device, except

ain emergency numbers, or use t require network coverage. To ust first exit the remote SIM has been locked, enter the lock

ode, press the power key, and de.

luetooth connectivity, select hone's visibility > Hidden.

own device.


Copyright © 20

SettingsPress , and select Connect. > Bluetooth. When you open the application for the first time, you are asked to define a name for your device. After you set Bluetooth connectivity on and change My phone's visibility to Shown to all, your device and this name can be seen by other users with devices using Bluetooth technology.

Select from the following:

Bluetooth — Select On or Off. To connect wirelessly to another compatible device, first set Bluetooth connectivity On, then establish a connection.

My phone's visibility — To allow your device to be found by other devices with Bluetooth technology, select Shown to all. To hide it from other devices, select Hidden.

My phone's name — Edit the name of your device.

Remote SIM mode — To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On.

Remote SIM modeTo use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device. When

pairing, use a 16-digit paas authorized. See "Pair dremote SIM mode from th

When the remote SIM moRemote SIM is displayedconnection to the wirelesindicated by in the sigyou cannot use SIM cardcellular network coverageconnection remains activ

Warning: In the rmake or receive anmake calls to certother features thamake calls, you mmode. If the devicecode.

To exit the remote SIM mselect Exit rem. SIM mo

Security tipsWhen you are not using BBluetooth > Off or My p

Do not pair with an unkn

80

n has been established, Sending

ag. does not store messages sent tivity.

ing for devices, some devices may que address (device address). To dress of your device, enter the code tandby mode.

ces view ( ), in the Bluetooth press .

our own passcode (1—16 digits), er of the other device to use the do not have a user interface have

The passcode is used only once.

lect Options > New paired device. luetooth technology within range isplay. Select the device, and enter passcode must be entered on the ter pairing, the device is saved to .

ated by in the device search.

rized or unauthorized, scroll to a the following options:



Conn

ectiv

ity Send data using Bluetooth connectivitySeveral Bluetooth connections can be active at a time. For example, if you are connected to a headset, you can also transfer files to another compatible device at the same time.

Bluetooth connectivity indicators• When is shown in the standby mode, Bluetooth

connectivity is on.• When is blinking, your device is trying to connect

with another device.• When is shown continuously, data is being

transmitted using Bluetooth connectivity.1 Open the application where the item you want to send

is stored. For example, to send an image to another compatible device, open Gallery.

2 Select the item and Options > Send > Via Bluetooth. Devices with Bluetooth technology within range start to appear on the display.Device icons are: computer, phone, audio or video device, and other device.To interrupt the search, select Stop.

3 Select the device with which you want to connect.4 If the other device requires pairing before data can be

transmitted, a tone sounds, and you are asked to enter a passcode. See "Pair devices", on page 80.

5 When the connectiodata is shown.

The Sent folder in Messusing Bluetooth connec

Tip! When searchshow only the unifind the unique ad*#2820# in the s

Pair devicesTo open the paired deviapplication main view,

Before pairing, create yand agree with the ownsame code. Devices thata factory-set passcode.

To pair with a device, seDevices with wireless Bstart to appear on the dthe passcode. The sameother device as well. Afthe paired devices view

Paired devices are indic

To set a device as authodevice, and select from


Conn

ectiv

ity

81

oth connectivityonnectivity, select Bluetooth >

connection

ansfer data such as business d media files with a compatible

(IR) beam at anyone's eye or other IR devices. This device is a

sing infrareded ports of the sending and pointing at each other, and that ons between the devices. The tween the two devices is up to 1

ing device activates the infrared

d port of your device to receive press , and select Connect. >


Copyright © 20

Set as authorised — Connections between your device and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.

indicates authorized devices in the paired devices view.

Set as unauthorised — Connection requests from this device must be accepted separately every time.

To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all.

Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, and the connection is switched off.

Receive data using Bluetooth connectivityWhen you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept, is shown, and the item is placed in the Inbox folder in Messag.. Messages received through Bluetooth connectivity are indicated by . See "Inbox — receive messages", on page 43.

Switch off BluetoTo switch off Bluetooth cOff.

Infrared

With infrared, you can trcards, calendar notes, andevice.

Do not point the infraredallow it to interfere with Class 1 laser product.

Send and receive data u1 Ensure that the infrar

receiving devices are there are no obstructipreferable distance bemeter (3 feet).

2 The user of the receivport.To activate the infraredata through infrared,Infrared.

82

s with a variety of PC connectivity ns applications. With Nokia PC ple, transfer images between your e PC.

ection from the PC to synchronize

modem as a modem to send and receive the Internet with a compatible PC nectivity, infrared, or a USB data ion instructions can be found in the Suite.

okia PC Suite for the first time, to ce to a compatible PC and to use se the Get Connected wizard PC Suite.

ion manager

nnect. > Conn. mgr.. To view the ns or end connections in GSM and less LAN, select Act. data conn..

ANs available within range, select



Conn

ectiv

ity 3 The user of the sending device selects the desired infrared function to start the data transfer.To send data through infrared, locate the desired file in an application or the file manager, and select Options > Send > Via infrared.

If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again.

All items received through infrared are placed in the Inbox folder in Messaging. New infrared messages are indicated by .

When blinks, your device is trying to connect to the other device or a connection has been lost.

When is shown continuously, the infrared connection is active, and your device is ready to send and receive data using its infrared port.

Data cbl.

Press , and select Connect. > Data cbl.. In Data cable mode, select what the USB data cable connection is used for: PC Suite, Data transfer, or Image Print. To have the device ask the purpose of the connection each time the cable is connected, select Ask on connection.

PC connectionYou can use your deviceand data communicatioSuite you can, for examdevice and a compatibl

Always create the connwith your device.

Your device as aYou can use your devicee-mail, or to connect toby using Bluetooth concable. Detailed installatUser Guide for Nokia PC

Tip! When using Nconnect your deviNokia PC Suite, uavailable in Nokia

Connect

Press , and select Costatus of data connectioUMTS network and wireTo search for wireless LAvailab. WLAN.


Conn

ectiv

ity

83

nization

ect. > Sync. Sync enables you s, calendar, contacts, or e-mail calendar and address book ible computer or on the Internet. it synchronization settings.

ication uses SyncML technology nformation on SyncML supplier of the application with ronize your device data.

ization settings in a special text ettings", on page 44.

u can see the different

on profile and Options > us of the synchronization is

tion before it finishes, select


Copyright © 20

Data connectionsIn the active connections view, you can see the open data connections: data calls ( ), packet data connections ( or ), and wireless LAN connections ( ).

Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.

To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all.

To view the details of a connection, select Options > Details. The details shown depend on the connection type.

Wireless LANThe available wireless LAN view shows a list of wireless LANs within range, their network mode (Infrastructure or Ad-hoc), and signal strength indicator. is shown for networks with encryption, and if your device has an active connection in the network.

To view the details of a network, select Options > Details.

To create an Internet access point in a network, select Options > Define access point.

Synchro

Press , and select Connto synchronize your notewith various compatible applications on a compatYou can also create or ed

The synchronization applfor synchronization. For icompatibility, contact thewhich you want to synch

You may receive synchronmessage. See "Data and s

Synchronize dataIn the Sync main view, yosynchronization profiles.

1 Select a synchronizatiSynchronise. The statshown on the display.To cancel synchronizaCancel.

84

ttingsovider for the correct settings.

name for the configuration server.

nique ID to identify the

er a password to identify your

n access point to be used when r.

he URL address of the server.

umber of the server.

rd — Enter your user name and

To receive configuration settings es.

If you want your device to ask for epting a configuration from the



Conn

ectiv

ity 2 You are notified when the synchronization is complete. Select Yes to view the log file showing the synchronization status and how many entries have been added, updated, deleted, or discarded (not synchronized) in your device or on the server.

Device manager

Press , and select Connect. > Dev. mgr.. You may receive server profiles and different configuration settings from your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different applications in your device.

To connect to a server and receive configuration settings for your device, scroll to a profile, and select Options > Start configuration.

To allow or deny receiving of configuration settings from service providers, select Options > Enable config. or Disable config..

Server profile seContact your service pr

Server name — Enter a

Server ID — Enter the uconfiguration server.

Server password — Entdevice to the server.

Access point — Select aconnecting to the serve

Host address — Enter t

Port — Enter the port n

User name and Passwopassword.

Allow configuration —from the server, select Y

Auto-accept all reqs. —confirmation before accserver, select No.


Conn

ectiv

ity

85

ttingsd in Gallery with other through wireless LAN, you must your wireless LAN home Internet nfigure the Home network s LAN", on page 15.

me network are not available in network settings have been

etwork application, select rk > Settings, and from the

lect Always ask if you want the e access point every time you ork, User defined to select your

t that is used automatically when or None. If your home network N security settings enabled, you ou can continue, and switch the later; or cancel defining the tch on the wireless LAN security. ess points", on page 99.


Copyright © 20

Home network

Your device is compatible with Universal Plug and Play architecture (UPnP). Using a wireless LAN access point device or a wireless LAN router, you can create a home network and connect compatible UPnP devices that support wireless LAN to the network, such as your Nokia N93, a compatible PC, a compatible printer, and a compatible sound system or a TV, or a sound system or TV equipped with a compatible wireless multimedia receiver.

Using the wireless LAN function of the Nokia N93 in a home network requires a working wireless LAN home connection setup and the other target home devices to be UPnP enabled and to be connected to the same home network.

You can share media files saved in Gallery with other compatible UPnP devices using the home network. To manage your Home network settings, press , and select Connect. > Home network. You can also use the home network to view, play, copy, or print compatible media files from Gallery. See "View media files", on page 86.

Home network seTo share media files savecompatible UPnP devicesfirst create and configureaccess point, and then coapplication. See "Wireles

The options related to HoGallery before the Homeconfigured.

Configure settings

To configure the Home nConnect. > Home netwofollowing:

Home access point — Sedevice to ask for the homconnect to the home netwhome Internet access poinyou use Home network, does not have wireless LAget a security warning. Ywireless LAN security on access point, and first swiSee Wireless LAN in "Acc

86

sharing off. Even if Content vice, you can still view and copy another home network device if it device.

tored in your device, and sound clips stored in your in another home network device, , do the following:image, a video clip, or a sound clip.ow via home net.. device in which the media file is re shown both in the other home our device, and the video clips and

ed only in the other device.

tored in the other devicet are stored on another home w them in your device (or in a ple), do the following:

me network. Your device starts the patible devices. Device names start play. the list. edia you want to view from the ailable file types depend on the r device.



Conn

ectiv

ity My device name — Enter a name for your device that is shown to the other compatible devices in the home network.

Set sharing on and define content

Select Connect. > Home network > Share content.

Content sharing — Allow or deny sharing media files with compatible devices. Do not set Content sharing on before you have configured all the other settings. If you set Content sharing on, the other UPnP compatible devices in the home network can view and copy your files you have selected for sharing in the Images & video and Music folders.

To select media files for sharing with other devices from the Images & video and Music folders, or to view the sharing status of Images & video or Music, select Share content.

View media filesTo connect a compatible PC to the home network, you must install the related software from the DVD-ROM supplied with your Nokia N93.

If Content sharing is on in your device, the other UPnP compatible devices in the home network can view and copy the media files you have selected to share in Share content. If you do not want the other devices to access

your files, set Content sharing is off in your dethe media files stored inis allowed by the other

Show media files sTo select images, videosdevice, and show them such as a compatible TV1 In Gallery, select an 2 Select Options > Sh3 Select a compatible

shown. The images anetwork device and ysound clips are play

Show media files sTo select media files thanetwork device, and shocompatible TV, for exam

1 In Gallery, select Hosearch of other comto appear on the dis

2 Select a device from3 Select the type of m

other device. The avfeatures of the othe


Conn

ectiv

ity

87

files from your device to another s a UPnP compatible PC, select a ns > Organise > Copy to home e network. Content sharing hed on.

rom the other device to your other device, and Options > opy to memory card (the name memory card is available). t have to be switched on.


Copyright © 20

4 Select the image, video clip, or music clip you want to view, and select Options > Show via home net. (images and video) or Play via home network (music).

5 Select the device in which the file is shown.

To stop sharing the media file, select Options > Stop showing.

To print images saved in Gallery through Home network with a UPnP compatible printer, select the print option in Gallery. See "Image print", on page 37. Content sharing does not have to be switched on.

To search files with different criteria, select Options > Find. To sort the found files, select Options > Sort by.

Copy media filesTo copy or transfer mediacompatible device, such afile in Gallery, and Optionetwork or Move to homdoes not have to be switc

To copy or transfer files fdevice, select a file in theCopy to phone mem. or Cof the memory card if theContent sharing does no

88

cy and exchange rates> Options > Currency rates.

rrency conversions, you must select exchange rates. The rate of the

1.

change base currency, you must tes because all previously set re cleared.

, and select Office > Notes. You atible devices, and save plain text ou receive to Notes.

patible Basic Print Profile (BPP) luetooth connectivity (such as HP ter or HP Photosmart 8150), select



Off

ice Office

Calculator

To add, subtract, multiply, divide, and calculate square roots and percentages, press , and select Office > Calculator.

Note: This calculator has limited accuracy and is designed for simple calculations.

Converter

To convert measures from one unit to another, press , and select Office > Converter.

Converter has limited accuracy, and rounding errors may occur.1 In the Type field, select the measure you want to use.2 In first Unit field, select the unit from which you want

to convert. In the next Unit field, select the unit to which you want to convert.

3 In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value.

Set base currenSelect Type > CurrencyBefore you can make cua base currency and addbase currency is always

Note: When youenter the new raexchange rates a

Notes

To write notes, press can send notes to compfiles (.txt format) that y

To print a note on a comequipped printer with BDeskjet 450 Mobile PrinOptions > Print.


Off

ice

89

r

ress , and select Office > ephone conversation, open all. Both parties hear a tone cording.

pplication to decode different le, barcodes and codes in y contain information such as

es, and phone numbers.

des, press , and select .

n code. Set the code between y. The Barcode reader scans and e decoded information appears

select Options > Save. The data

formation, in the main view, n a code, press .


Copyright © 20

Web browser

Various service providers maintain pages specifically designed for mobile devices. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).

Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.

Press , and select Office > Web.

With this additional browser, you are able to view normal Web pages, to zoom in and out on a page (Mini Map), to view Web pages that contain only text in narrow form so that text wraps, and to read feeds and blogs.

To turn the Mini Map on or off for the current page, press . When the Mini Map is on, an overview of the complete

page is shown when you press and hold the scroll key right, left, up, or down to move on the page.

See also "Web access point", on page 65.

Recorde

To record voice memos, pRecorder. To record a telRecorder during a voice cevery 5 seconds during re

Barcode readerUse the Barcode reader atypes of codes (for exampmagazines). The codes maURL links, e-mail address

To scan and decode barcoOffice > Barcode reader

To scan a code, select Scathe red lines on the displadecodes the code, and thon the display.

To save the scanned data,is saved in .bcr format.

To view saved decoded inselect Saved data. To ope

90

ffice

pplications, press , and select list of files in the .doc, .xls, .ppt, ed in your device opens.

ctive application, press . To sort ort files.

icksheet, or Quickpoint, press w.

an view native Microsoft Word ay of your device. Quickword alics, and underline.

e viewing of documents saved in t Word 97, 2000, and XP. Not all f the mentioned file formats are

tion", on page 92.

ntsnt, use the scroll key.

for text, select Options > Search.



Off

ice When viewing the decoded information, the different

links, URL links, phone numbers, and e-mail addresses, are indicated by icons on the top of the display in the direction they appear in the decoded information.

In the Saved data view, select Options and from the following:

Scan new code — To scan a new code

Open link — To open a URL link

Add to bookmarks — To save a URL link to the bookmarks in Web

Create message — To send a text message or an e-mail to a phone number or an e-mail address

Add to Contacts — To add a phone number, e-mail address, or URL address to Contacts

Call — To call a phone number.

The available options may vary depending on the highlighted link.

The device goes into stanby mode to save battery power if Barcode reader cannot be activated or if no keys are pressed for 1 minute. To continue scanning or viewing saved information, press .

Quicko

To use the Quickoffice aOffice > Quickoffice. Aand .txt file formats sav

To open a file in its respefiles, select Options > S

To open Quickword, Quto reach the desired vie

QuickwordWith Quickword, you cdocuments on the displsupports colors, bold, it

Quickword supports th.doc format in Microsofvariations or features osupported.

See also "More informa

View Word documeTo move in the docume

To search the document


Off

ice

91

the current worksheet by blocks. and rows displayed by a screen. d rows, use the scroll key to

t

he highlighted row, column, or ve in the spreadsheet

e of columns or rows

n view Microsoft PowerPoint lay of your device.

viewing of presentations created ft PowerPoint 97, 2000, and XP. res of the mentioned file formats

on", on page 92.

e, outline, and the notes view,

evious slide in the presentation,


Copyright © 20

You can also select Options and from the following:

Go to — to move to the start, end, or selected position within the document

Zoom — to zoom in or out

Start Autoscroll — to start automatic scrolling through the document. To stop scrolling, press .

QuicksheetWith Quicksheet, you can read Microsoft Excel files on the display of your device.

Quicksheet supports the viewing of spreadsheet files saved in .xls format in Microsoft Excel 97, 2000, 2003, and XP. Not all variations or features of the mentioned file formats are supported.

See also "More information", on page 92.

View spreadsheetsTo move around in the spreadsheet, use the scroll key.

To switch between worksheets, select Options > Worksheet.

To search the speadsheet for a text within a value or formula, select Options > Find.

To change how the spreadsheet is displayed, select Options and from the following:

Pan — to navigate within A block contains columnsTo display the columns anselect a block and OK.

Zoom — to zoom in or ou

Freeze panes — to keep tboth visible while you mo

Resize — to adjust the siz

QuickpointWith Quickpoint, you capresentations on the disp

Quickpoint supports the in .ppt format in MicrosoNot all variations or featuare supported.

See also "More informati

View presentationsTo move between the slidpress or .

To move to the next or prpress or .

92



Off

ice To view the presentation in full screen, select Options >

Full screen.

To expand items in the presentation outline in the outline view, select Options > Expand entry.

More informationIf you experience problems with Quickword, Quicksheet, or Quickpoint, visit www.quickoffice.com for more information. Support is also available by sending an e-mail to [email protected].


Pers

onal

ize

your

dev

ice

93

own in the standby mode, press Options > Settings > Clock igital.e note to an image or animation, ools > Settings > Phone > ote / logo.enu view, in the main menu, ge view > Grid or List.

menu, in the main menu, select e to folder, or New folder. You

plications into folders, and place se more often into the main menu.

— set tones

ringing tones, message alert different events, environments, , and select Tools > Profiles.

ss in the standby mode. ant to activate, and select OK.

, and select Tools > Profiles. select Options > Personalise. ant to change, and press to


Copyright © 20

Personalize your deviceYour service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured for your network provider. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information.• To use the standby display for fast access to your most

frequently used applications, see "Active standby mode", on page 95.

• To change the standby mode background image or what is shown in the screen saver, see "Change the look of your device", on page 94.

• To customize the ringing tones, see "Profiles — set tones", on page 93 and "Add ringing tones for contacts", on page 64.

• To change the shortcuts assigned for the different presses of the scroll key and left and right selection keys in the standby mode, see "Standby mode", on page 97.

• To change the clock sh, and select Clock >

type > Analogue or D• To change the welcom

press , and select TGeneral > Welcome n

• To change the main mselect Options > Chan

• To rearrange the mainOptions > Move, Movcan move less used apapplications that you u

Profiles

To set and customize thetones, and other tones foror caller groups, press

To change the profile, preScroll to the profile you w

To modify a profile, pressScroll to the profile, and Scroll to the setting you w

94

evice must be switched on to use o not switch the device on when se is prohibited or when it may

ce or danger.

d the Offline profile, you can still available), for example, to read n the Internet. Remember to

able safety requirements when wireless LAN connection. See 15.

ile, press the power key, and select ice reenables wireless g there is sufficient signal connection is activated before

e, it is deactivated. A Bluetooth ally reactivated after you exit the

ttings", on page 79.

the look of your

he display, such as the wallpaper select Tools > Themes. The active

. In Themes you can group other themes or select images sonalize themes further. The card (if inserted) are indicated by



Pers

onal

ize

your

dev

ice open the choices. Tones stored on the memory card are

indicated with . You can scroll through the tone list and listen to each one before you make your selection. To stop the sound, press any key.

When you choose a tone, Tone downloads opens a list of bookmarks. You can select a bookmark and start connection to a Web page to download tones.

If you want the caller’s name to be said when your device rings, select Options > Personalise, and set Say caller's name to On. The caller’s name must be saved in Contacts.

To create a new profile, select Options > Create new.

Offline profileThe Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by in the signal strength indicator area. All wireless phone signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later.

Warning: In the offline profile you cannot make (or receive) any calls, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code.

Warning: Your dOffline profile. Dwireless device ucause interferen

When you have activateuse the wireless LAN (ifyour e-mail or browse ocomply with any applicestablishing and using a"Wireless LAN", on page

To exit the Offline profanother profile. The devtransmissions (providinstrength). If a Bluetoothusing the Offline profilconnection is automaticOffline profile. See "Se

Changedevice

To change the look of tand icons, press , andtheme is indicated by together elements fromfrom the Gallery to perthemes on the memory


Pers

onal

ize

your

dev

ice

95

y is

p of

r

plications shortcuts, press , Phone > Standby mode > d press .

ixed, and you are not able to


Copyright © 20

. The themes on the memory card are not available if the memory card is not inserted in the device. If you want to use the themes saved in the memory card without the memory card, save the themes in the device memory first.

To open a browser connection and download more themes, select Theme downloads.

To activate a theme, scroll to it, and select Options > Apply. To preview a theme before activating it, select Options > Preview.

To edit themes, scroll to a theme, and select Options > Edit to change the Wallpaper and Power saver settings.

To restore the selected theme to its original settings, select Options > Restore orig. theme when you edit a theme.

Active standby modeUse your standby display for fast access to your most frequently used applications. By default, the active standby mode is on.

Press , select Tools > Settings > Phone > Standby mode > Active standby, and press to switch the active standby on or off.

The active standby displashown with default applications across the tothe screen, and calendar,to-do, and player events listed below.

Scroll to an application oevent, and press .

The standard scroll key shortcuts available in thestandby mode cannot be used when the active standby mode is on.

To change the default apselect Tools > Settings >Active standby apps., an

Some shortcuts may be fchange them.

96

reset for the device by your vice provider, and you may not be

ttings

nging the language of the display affects the format used for date

ators used, for example, in selects the language according to

r SIM card. After you change the he device restarts.

or Phone language or Writing application in your device, and the e until you change these settings

anging the language affects the haracters available when writing text dictionary used.



Tool

s ToolsMedia key

To open the shortcut assigned to the multimedia key, press and hold . To open a list of multimedia applications, press . To open the desired application, use the scroll key. To exit the list without selecting an application, press and hold .

To change the shortcuts, press , and scroll down. To change the default shortcut, select Multimedia key. To change the applications that are shown when you press

, select Top, Left, Middle, and Right and the application.

Some shortcuts may be fixed, and you are not able to change them.

Settings

To change settings, press , and select Tools > Settings. To open a settings group, press . Scroll to a setting you want to change, and press .

Some settings may be pnetwork operator or serable to change them.

Phone se

GeneralPhone language — Chatexts in your device alsoand time and the separcalculations. Automaticthe information on youdisplay text language, t

Changing the settings flanguage affects every change remains effectivagain.

Writing language — Chcharacters and special ctext and the predictive


Tool

s

97

short tune to play when you evice is in the standby mode.

Select No or Yes.

d call or Activate loudspeaker.

ortcuts to applications in the e standby mode", on page 95.

ign a shortcut to the left standby mode.

sign a shortcut to the right standby mode.

elect the application shortcuts e active standby. This setting is tandby is on.

ad shortcuts for the different The scroll key shortcuts are not ndby is on.

ting is only available if you have erator logo. Select Off if you do hown.


Copyright © 20

Predictive text — Set the predictive text input On or Off for all editors in the device. The predictive text dictionary is not available for all languages.

Welcome note / logo — The welcome note or logo is displayed briefly each time you switch on the device. Select Default to use the default image, Text to write a welcome note, or Image to select an image from Gallery.

Orig. phone settings — You can reset some of the settings to their original values. To do this, you need the lock code. See "Security", "Phone and SIM", on page 103. After resetting, the device may take a longer time to power on. Documents and files are unaffected.

Cover displayPersonalisation

Wallpaper — Select the background image displayed on the cover display in the standby mode. If you select User defined in the wallpaper settings, the cropping tool frame is shown on top of the image you selected. The cropping tool frame is the size of the cover display, and you can zoom, rotate, and crop the area of the image you want to be displayed on the cover display.

Closing animation — Select a short animation to play when you close the cover.

Closing tone — Select a short tune to play when you close the cover.

Opening tone — Select aopen the cover and the d

Calls:

Answer if fold opened —

If fold closed — Select En

Standby modeActive standby — Use shstandby mode. See "Activ

Left selection key — Assselection key ( ) in the

Right selection key — Asselection key ( ) in the

Active standby apps. — Syou want to appear in thonly available if Active s

You can also assign keyppresses of the scroll key. available if the active sta

Operator logo — This setreceived and saved an opnot want the logo to be s

98

a text to be sent in a text message

ou can deny video sending when Select a still image to be displayed

lect On, and your device makes a ts to connect the call after an pt. To stop automatic redialing,

ctivate this setting if you want the the approximate duration of the

On, and the numbers assigned to — ) can be dialed by pressing

also "Speed dial a phone number",

t On, and you can answer an pressing any keypad key, except .

ng (network service) is shown only s two subscriber numbers, that is, which phone line you want to use ding text messages. Calls on both

rrespective of the selected line. If ave not subscribed to this network



Tool

s DisplayBrightness — Adjust the basic brightness level of the display to lighter or darker. However, in extreme light conditions, the brightness of the display is automatically adjusted.

Power saver time-out — Select the time-out period after which the screen saver is activated.

Light time-out — Select a time-out after which the backlight of the display is switched off.

Call settings

Send my caller ID — You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network) (network service).

Call waiting — If you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. Set the function on (Activate) or off (Cancel), or check whether the function is activated (Check status).

Reject call with SMS — Select Yes to send a text message to a caller informing why you could not answer the call. See "Answer or reject a call", on page 58.

Message text — Write when you reject a call.

Image in video call — Yyou receive a video call.instead of video.

Automatic redial — Semaximum of 10 attempunsuccessful call attempress .

Summary after call — Adevice to briefly displaylast call.

Speed dialling — Selectthe speed dialing keys (and holding the key. Seeon page 53.

Anykey answer — Selecincoming call by briefly

, , , and

Line in use — This settiif the SIM card supporttwo phone lines. Selectfor making calls and senlines can be answered iyou select Line 2 and h


Tool

s

99

eb application to view WML or

(IAP) to send and receive e-mail ternet

point you need with your service u want to access. For availability t data connection services, rator or service provider.

oint settings in a message from ata and settings", on page 44. may be preset for your device by etwork operator, and you may eate, edit, or remove them. ess point.

ta access point, and a t.

ternet access point in a wireless select Connect. > Conn. mgr. > ptions > Define access point.

oint, select Options > New ettings of an access point, select e instructions from your service


Copyright © 20

service, you will not be able to make calls. When line 2 is selected, is shown in the standby mode.

Tip! To switch between the phone lines, press and hold in the standby mode.

Line change — To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.

Connection

Data connections and access pointsYour device supports packet data connections, such as GPRS in the GSM network. When you use your device in GSM and UMTS networks, multiple data connections can be active at the same time, and access points can share a data connection.

You can also use a wireless LAN data connection. See "Wireless LAN", on page 15. Only one connection in one wireless LAN can be active at a time.

To establish a data connection, an access point is required. You can define different kinds of access points, such as:• MMS access point to send and receive multimedia

messages

• Access point for the WXHTML pages

• Internet access point and connect to the In

Check the type of access provider for the service yoand subscription to packecontact your network ope

Access pointsYou may receive access pa service provider. See "DSome or all access points your service provider or nnot be able to change, crindicates a protected acc

indicates a packet dawireless LAN access poin

Tip! To create an InLAN, press , and Availab. WLAN > O

To create a new access paccess point. To edit the sOptions > Edit. Follow thprovider.

10

ct Normal or Secure.

g on the access point you are eb address or the address of the center.

ced settings to change the

the Internet protocol type to use: ettings. The other settings depend type.

v4 only) — Enter the IP address of

ary name serv.:, enter the IP NS server. In Second. name server:, he secondary DNS server. Contact ovider to obtain these addresses.

efine the address for the proxy

nter the proxy port number.

from your service provider.

elect Enter manually or Search an existing network, WLAN netw. ity mode are determined by the int device.



Tool

s

0

Connection name — Enter a descriptive name for the connection.

Data bearer — Select the data connection type.

Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.

To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card.

Packet data

Follow the instructions from your service provider.

Access point name — You obtain the access point name from your network operator or service provider.

User name — The user name may be needed to make a data connection, and is usually provided by the service provider.

Prompt password — If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.

Password — A password may be needed to make a data connection, and is usually provided by the service provider.

Authentication — Sele

Homepage — Dependinsetting up, enter the Wmultimedia messaging

Select Options > Advanfollowing settings:

Network type — SelectIPv4 settings or IPv6 son the selected network

Phone IP address (for IPyour device.

DNS address — In Primaddress of the primary Denter the IP address of tyour Internet service pr

Proxy serv. address — Dserver.

Proxy port number — E

Wireless LAN

Follow the instructions

WLAN netw. name — Sfor netw.. If you select mode and WLAN secursettings of its access po


Tool

s

101

ly for EAP) — Enter the settings nstructs.

Pre-shared key) — Enter a word must be entered on the t device.

whether Temporal Key Integrity

me page.

ed settings and from the

ddress (the IP address of your e subnet IP address), Default nd DNS address — Enter the IP and secondary DNS server. vice provider for these addresses.

ress — Select Automatic, ined.

r Ad-hoc) — To enter a channel select User defined.

ter the address for the proxy

ter the proxy port number.


Copyright © 20

WLAN netw. mode — Select Ad-hoc to create an ad hoc network and to allow devices to send and receive data directly; a wireless LAN access point device is not needed.

WLAN security mode — Select the encryption used: WEP, 802.1x (not for ad hoc networks), or WPA/WPA2. If you select Open network, no encryption is used. The WEP, 802.1x, and WPA functions can be used only if the network supports them.

WLAN security sett. — Enter the settings for the selected security mode:

Security settings for WEP:

Wep key in use — Select the WEP key number. You can create up to four WEP keys. The same settings must be entered on the wireless LAN access point device.

Authentication type — Select Open or Shared for the authentication type between your device and the wireless LAN access point device.

WEP key settings — Enter WEP encryption (length of the key), WEP key format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected format).

Security settings for 802.1x and WPA/WPA2:

WPA mode — Select the means of authentication: EAP to use an extensible authentication protocol (EAP) plug-in, or Pre-shared key to use a password. Complete the appropriate settings:

EAP plug-in settings (onas your service provider i

Pre-shared key (only forpassword. The same passwireless LAN access poin

TKIP encryption — SelectProtocol (TKIP) is used.

Homepage — Define a ho

Select Options > Advancfollowing:

IPv4 settings: Phone IP adevice), Subnet mask (thgateway (the gateway), aaddresses of the primary Contact your Internet ser

IPv6 settings > DNS addWell-known, or User def

Ad-hoc channel (only fonumber (1-11) manually,

Proxy serv. address — Enserver.

Proxy port number — En

10

server settings from your network ider in a configuration message, or d on your (U)SIM card. You can save ice, view, or delete them in Configs..

nd time

page 14 and language settings in

en active, the code is requested switched on. Deactivating the umber (PIN) code request may not cards. See "Glossary of PIN and

3.

nd Lock code — You can change , and PIN2 code. These codes can rs from 0 to 9. If you forget any of r service provider. See "Glossary of page 103.



Tool

s

2

Packet dataThe packet data settings affect all access points using a packet data connection.

Packet data conn. — If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active packet data connection (for example, to send and receive e-mail) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or action that needs it.

Access point — The access point name is needed to use your device as a packet data modem to your computer.

Wireless LANShow availability — Select whether is displayed when a wireless LAN is available.

Scan for networks — If you set Show availability to Yes, select how often the device searches for available wireless LANs and updates the indicator.

To view advanced settings, select Options > Advanced settings. Changing wireless LAN advanced settings is not recommended.

Configs.You may receive trustedoperator or service provthe settings may be storethese settings to your dev

Date a

See "Clock settings", on"General", on page 96.

Security

Phone and SIMPIN code request — Wheach time the device is personal identification nbe allowed by some SIMlock codes", on page 10

PIN code, PIN2 code, athe lock code, PIN codeonly include the numbethese codes, contact youPIN and lock codes", on


Tool

s

103

codes

codes, contact your service

mber (PIN) code — This code ainst unauthorized use. The PIN ally supplied with the SIM card. correct PIN code entries, the

need the PUK code to unblock it.

ay be supplied with the USIM enhanced version of the SIM UMTS mobile phones.

to 8 digits) is supplied with some to access some functions in

security code) — This code (5 k the device to avoid tory setting for the lock code is rized use of your device, change w code secret and in a safe place . If you forget the code, contact

PUK) code and PUK2 code — required to change a blocked PIN tively. If the codes are not

rd, contact the operator whose .


Copyright © 20

Avoid using access codes similar to the emergency numbers to prevent accidental dialing of the emergency number.

Autolock period — You can set an autolock period, a time-out after which the device automatically locks. To turn off the autolock period, select None.

To unlock the device, enter the lock code.

When the device is locked, calls still may be possible to the official emergency number programmed into your device.

Tip! To lock the device manually, press . A list of commands opens. Select Lock phone.

Lock if SIM changed — You can set the device to ask for the lock code when an unknown SIM card is inserted into your device. The device maintains a list of SIM cards that are recognized as the owner’s cards.

Closed user group — You can specify a group of people to whom you can call and who can call you (network service).

When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device.

Confirm SIM services — You can set the device to display confirmation messages when you are using a SIM card service (network service).

Glossary of PIN and lock

If you forget any of theseprovider.

Personal identification nuprotects your SIM card agcode (4 to 8 digits) is usuAfter three consecutive incode is blocked, and you

UPIN code — This code mcard. The USIM card is ancard and is supported by

PIN2 code — This code (4 SIM cards, and is requiredyour device.

Lock code (also known asdigits) can be used to locunauthorized use. The fac12345. To avoid unauthothe lock code. Keep the neseparate from your deviceyour service provider.

Personal unblocking key (These codes (8 digits) are code or PIN2 code, respecsupplied with the SIM caSIM card is in your device

10

pired certificate or Certificate even if the certificate should be rrent date and time in your device

s—check authenticity

the correct identity of a server the period of validity of a server ecked.

dentity of the server is not ot have the correct security e.

ails, scroll to a certificate, and icate details. When you open alidity of the certificate is checked, g notes may be displayed:ted — You have not set any e certificate. See "Change the trust 05.— The period of validity has ended ificate.d yet — The period of validity has e selected certificate.ed — The certificate cannot be rtificate issuer.



Tool

s

4

UPUK code — This code (8 digits) is required to change a blocked UPIN code. If the code is not supplied with the USIM card, contact the operator whose USIM card is in your device.

Certif. managementDigital certificates do not guarantee safety; they are used to verify the origin of software.

In the certificate management main view, you can see a list of authority certificates that are stored in your device. Press to see a list of personal certificates, if available.

Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information. They should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software.

Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a

restricted lifetime. If Exnot valid yet is shown valid, check that the cuare correct.

View certificate detail

You can only be sure ofwhen the signature andcertificate have been ch

You are notified if the iauthentic or if you do ncertificate in your devic

To check certificate detselect Options > Certifcertificate details, the vand one of the followin• Certificate not trus

application to use thsettings", on page 1

• Expired certificate for the selected cert

• Certificate not valinot yet begun for th

• Certificate corruptused. Contact the ce


Tool

s

105

ert

ivert your incoming calls to your phone number. For details, ider.

nt to divert and the desired voice calls when your number is coming calls, select If busy. Set r off (Cancel), or check whether heck status).

can be active at the same time. d, is shown in the

rting cannot be active at the

ring

vice) allows you to restrict the eive with the device. To change restriction password from your


Copyright © 20

Change the trust settings

Before changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.

Scroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example:• Symbian installation: Yes — The certificate is able to

certify the origin of a new Symbian operating system application.

• Internet: Yes — The certificate is able to certify servers.• App. installation: Yes — The certificate is able to

certify the origin of a new JavaTM application.

Select Options > Edit trust setting to change the value.

Track protect. objectSome copyright-protected music files may include a transaction identifier. Select whether you allow the identifier to be sent with the music file if you send or forward the file. The provider of the music file can use the identifier to track the distribution of the files.

EAP plug-insYou can view the EAP plug-ins currently installed in your device (network service). Some Internet access points that use wireless LAN as a data bearer and WPA security mode use the plug-ins for authentication.

Call div

Call divert allows you to dvoice mailbox or anothercontact your service prov

Select which calls you wadiverting option. To divertbusy or when you reject inthe option on (Activate) othe option is activated (C

Several diverting optionsWhen all calls are divertestandby mode.

Call barring and call divesame time.

Call bar

Call barring (network sercalls that you make or recthe settings, you need theservice provider.

10

k. The selected network must have ith your home network, that is, the d is in your device.

ng agreement is an agreement ore network service providers to f one service provider to use the ervice providers.

ct On to set the device to indicate lar network based on microcellular gy and to activate cell info reception.

. sett.

indicates a compatible headset hat the headset is unavailable, or a o a headset is lost. indicates a nnected and that a Text

, Text phone, Bluetooth handsfree, stand and from the following:

he profile that you want activated a certain enhancement to your et tones", on page 93.

t if you want the device to answer tically after 5 seconds. If the ringing



Tool

s

6

Select the desired barring option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call barring affects all calls, including data calls.

Call barring and call diverting cannot be active at the same time.

When calls are barred, calls may be possible to the official emergency number programmed into your device.

Network

Your device can automatically switch between the GSM and UMTS networks. The GSM network is indicated with

in the standby mode. The UMTS network is indicated with .

Network mode (shown only if supported by the operator) — Select which network to use. If you select Dual mode, the device uses the GSM or UMTS network automatically, according to the network parameters and the roaming agreements between the network operators. Contact your network operator for more details.

Operator selection — Select Automatic to set the device to search for and select one of the available networks, or Manual to manually select the network from a list of networks. If the connection to the manually selected network is lost, the device sounds an error tone and asks

you to reselect a networa roaming agreement woperator whose SIM car

Glossary: A roamibetween two or menable the users oservices of other s

Cell info display — Selewhen it is used in a cellunetwork (MCN) technolo

Enhanc

In the standby mode, is connected, and tBluetooth connection tcompatible loopset is cophone is connected.

Select Headset, LoopsetMusic stand or Car kit

Default profile — Set teach time you connect device. See "Profiles — s

Automatic answer — Sean incoming call automa


Tool

s

107

rofiles. To use enhanced voice d in the standby mode, and voice command is the name of

displayed in the list.

to the list, select Options > New ond voice command that can be ion, select Options > Change new voice command as text. bbreviations, and acronyms.

ed voice tag, select Options >

d settings, select Options > e synthesizer that plays commands in the selected

ynthesiser > Off. To reset voice example, when the main user of elect Reset voice adapts..

tion manager

ls > App. mgr.. You can install and software to your device:sed on Java technology with the

).


Copyright © 20

type is set to Beep once or Silent, automatic answer is disabled. Automatic answer is not available for Text phone.

Lights (for music stand and car kit) — Set whether lights remain on, or are switched off after the time-out.

If you are using a Text phone, you must activate it on your device. Press , and select Tools > Settings > Enhancement > Text phone > Use Text phone > Yes.

TV configurationPress , and select Tools > TV out. Select from the following:

TV system — Select PAL for PAL and SECAM TV system format or NTSC for NTSC TV system format.

Ratio — Select 4:3 or 16:9.

Voice commands

You can use voice commands to control your device. For more information about the enhanced voice commands supported by your device, see "Voice dialing", on page 53.

To activate enhanced voice commands for starting applications and profiles, you must open the Voice cm. application and its Profiles folder. Press , and select Tools > Voice cm. > Profiles; the device creates voice tags

for the applications and pcommands, press and holsay a voice command. Thethe application or profile

To add more applications application. To add a secused to start the applicatcommand, and enter theAvoid very short names, a

To listen to the synthesizPlayback.

To change voice commanSettings. To switch off threcognized voice tags anddevice language, select Srecognition learning, for the device has changed, s

Applica

Press , and select Tootwo types of applications• J2ME™ applications ba

extension .jad or .jar (

10

the following:ion type, version number, and the turer of the application, select ails.ity certificate details of the ptions > View certificate. See t", on page 104.at contains an update or repair to

ion, you can only restore the if you have the original installation copy of the removed software he original application, remove the all the application again from the file or the back-up copy.ed for installing Java applications. evice may ask you to download it. point defined for the application, ct one. When you are downloading need to enter a user name and

the server. You obtain these from facturer of the application.



Tool

s

8

• Other applications and software suitable for the Symbian operating system ( ). The installation files have the .sis extension. Only install software specifically designed for your Nokia N93. Software providers will often refer to the official model number of this product: the Nokia N93-1.

Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity or infrared. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a memory card (local disk).

Install applications and software indicates a .sis application, a Java application, that the application is not fully installed, and

that the application is installed on the memory card.

Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.

Before installation, note• To view the applicat

supplier or manufacOptions > View det

• To display the securapplication, select O"Certif. managemen

• If you install a file than existing applicatoriginal application file or a full back-uppackage. To restore tapplication, and instoriginal installation

• The .jar file is requirIf it is missing, the dIf there is no accessyou are asked to selethe .jar file, you maypassword to access the supplier or manu


Tool

s

109

evice can only support one n. Having more than one

ntivirus functionality could and operation or cause the tioning.

ons and softwareage, and select Options > nfirm.

ou can only reinstall it if you e package or a full backup of the e. If you remove a software

ger be able to open documents re.

ftware package depends on the that you removed, the other may stop working. Refer to the the installed software package

s and from the following:

elect to check the online ing an application.


Copyright © 20

1 To locate an installation file, press , and select Tools > App. mgr.. Alternatively, search the device memory or a memory card (if inserted) in File mgr., or open a message in Messag. > Inbox that contains an installation file.

2 In App. mgr., select Options > Install. In other applications, scroll to the installation file, and press to start the installation.During installation, the device shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application.

To start an installed application, locate it in the menu, and press .

To start a network connection and to view extra information about the application, select Options > Go to web address, if available.

To see what software packages are installed or removed and when, select Options > View log.

To send your installation log to a help desk so that they can see what is installed or removed, select Options > Send log > Via text message or Via e-mail (available only if the correct e-mail settings are in place).

Important: Your dantivirus applicatioapplication with aaffect performancedevice to stop func

Remove applicatiScroll to a software packRemove. Select Yes to co

If you remove software, yhave the original softwarremoved software packagpackage, you may no loncreated with that softwa

Note: If another sosoftware package software package documentation of for details.

SettingsSelect Options > Setting

Online certif. check — Scertificates before install

11

that have no media files connected

or extend the usage period for a alid activation key and Options > ivation keys cannot be updated if ception is disabled. See "Web age 45.

ation, such as the validity status ile, scroll to an activation key, and



Tool

s

0

Default web address — Set the default address used when checking online certificates.

Some Java applications may require a phone call, a message to be sent, or a network connection to a specific access point for downloading extra data or components. In the App. mgr. main view, scroll to an application, and select Options > Suite settings to change settings related to that specific application.

Activation keys for copyright-protected files


To view the digital rights activation keys stored in your device, press , and select Tools > Actv. keys and from the following:

Valid keys — View keys that are connected to one or more media files and keys whose validity period has not started yet.

Invalid keys — View keys that are not valid; the time period for using the media file is exceeded or there is a protected media file in the device but no connected activation key.

Not in use — View keys to them in the device.

To buy more usage timemedia file, select an invGet activation key. ActWeb service message reservice messages", on p

To view detailed informand ability to send the fpress .


Trou

bles

hoot

ing

111

vice is not in the hidden mode.s are compatible.

ooth connection?

nected to your device, you can on using the other device or by connectivity. Select Connect. >

ing message is displayed: No valid efine one in Services settings.?

ser settings. Contact your service s.

udgy?

plastic film covering the display t the camera lens protection

ise from the camera when om is used?

ment causes mechanical noise. Settings > Optical zoom during inate mechanical noise caused by cording.


Copyright © 20

TroubleshootingQ&AAccess codes

Q: What is my password for the lock, PIN, or PUK codes?

A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer.If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network service provider.For information about passwords, contact your access point provider, for example, a commercial Internet service provider (ISP), service provider, or network operator.

Application not responding

Q: How do I close an application that is not responding?

A: To open the application switching window, press and hold . Scroll to the application, and press to close the

application.

Bluetooth connectivity

Q: Why can’t I find my friend’s device?

A: Check that both devices have activated Bluetooth connectivity.Check that the distance between the two devices is not over 10 meters (33 feet) and that there are no walls or other obstructions between the devices.

Check that the other deCheck that both device

Q: Why can’t I end a Bluet

A: If another device is coneither end the connectideactivating BluetoothBluetooth > Off.

Browser services

Q: What do I do if the followaccess point defined. D

A: Insert the correct browprovider for instruction

Camera

Q: Why do images look sm

A: Remove the protective and camera. Ensure thawindow is clean.

Q: Why is there audible noautofocus or optical zo

A: Zoom and AF lens moveSelect select Options >recording > Off to elimlens movement when re

11

ear empty?

ed a filter, and no communication er have been logged. To see all > My own > Log > Options > cation.

evice memory is low?

llowing items regularly to avoid

, Drafts, and Sent folders in Messag.sages from the device memory

Gallery

tion, calendar notes, call timers, call or any other data, go to the remove the data. If you are deleting f the following notes are shown: Not orm operation. Delete some data lete some data., try deleting items the smallest item).

ta before deleting it?

one of the following methods:

make a back-up copy of all data to er.



Trou

bles

hoot

ing

2

Q: Why do images or videos captured using night mode tend to be noisier under dark lighting conditions compared to normal mode?

A: The output of the image sensor under the dark lighting conditions is more amplified with night mode than with normal mode to provide better brightness. In return, the noise level on the image or video increases.

Q: Why do VGA video frames appear jagged when video stabilization is activated?

A: Each video frame is enlarged from a smaller size within VGA to the VGA size when video stabilization is activated. Due to this, the quality within each frame is degraded compared to video without stabilization mode.

Display

Q: Why do missing, discolored, or bright dots appear on the screen every time I turn on my device?

A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.

Home network (UPnP)

Q: Why can’t I share files with other devices?

A: Ensure that you have configured the home network settings. Select Connect. > Home network > Share content > Content sharing, and the other device is UPnP compatible.

Log

Q: Why does the log app

A: You may have activatevents fitting that filtevents, select Menu Filter > All communi

Memory low

Q: What can I do if my d

A: You can delete the fomemory getting low:

• Messages from Inbox• Retrieved e-mail mes• Saved browser pages• Images and photos in

To delete contact informacost timers, game scores,respective application tomultiple items and one oenough memory to perffirst. or Memory low. Deone by one (starting from

Q: How can I save my da

A: Save your data using

• Use Nokia PC Suite toa compatible comput


Trou

bles

hoot

ing

113

connection when the device starts n and again?

making a data connection, select the following:efer retrieval — to have the centre save the message to be ple, after you have checked the ge, the device still needs to send

e network. To retrieve the message diately.eject message — to reject all essages. After this change, the formation notes to the network, ssaging center deletes multimedia ing to be sent to you.Off — to ignore all incoming fter this change, the device does onnections related to multimedia

s connecting the device to my PC?

ite is installed and running on your for Nokia PC Suite on the formation on how to use Nokia PC

tion on Nokia PC Suite or visit the nokia-asia.com.


Copyright © 20

• Send images to your e-mail address, then save the images to your computer.

• Send data using Bluetooth connectivity to a compatible device.

• Store data on a compatible memory card.

Messaging

Q: Why can’t I select a contact?

A: The contact card does not have a phone number or an e-mail address. Add the missing information to the contact card in Contacts.

Multimedia messaging

Q: What should I do when the device cannot receive a multimedia message because memory is full?

A: The amount of memory needed is indicated in the error message: Not enough memory to retrieve message. Delete some data first. To view what kind of data you have and how much memory the different data groups consume, select File manager > Options > Memory details.

Q: The note Retrieving message is shown briefly. What is happening?

A: The device is trying to retrieve a multimedia message from the multimedia messaging center.Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Select Messaging > Options > Settings > Multim. msg..

Q: How can I end the data a data connection agai

A: To stop the device fromMessaging and one of On receiving msg. > Dmultimedia messaging retrieved later, for examsettings. After this chaninformation notes to thnow, select Retr. immeOn receiving msg. > Rincoming multimedia mdevice needs to send inand the multimedia memessages that are waitMultimedia recept. > multimedia messages. Anot make any network cmessaging.

PC connectivity

Q: Why do I have problem

A: Ensure that Nokia PC SuPC. See the User Guide DVD-ROM. For further inSuite, see the help funcsupport pages at www.

11



Trou

bles

hoot

ing

4

Wireless LAN

Q: Why can't I see a wireless LAN (WLAN) access point even though I know I'm within its range?

A: The WLAN access point may use a hidden service set identifier (SSID). You can only access networks that use a hidden SSID if you know the correct SSID and have created a WLAN Internet access point for the network on your Nokia device.

Q: How do I switch wireless LAN (WLAN) off on my Nokia device?

A: You cannot switch off WLAN on your Nokia device. To reduce battery consumption, you can specify that your Nokia device does not scan for available networks.

To turn off the background scan:1 Press , and select Tools > Settings > Connection >

Wireless LAN.2 Select Scan for networks > Never.3 To save your changes, select Done.

When Scan for networks is set to Never, your Nokia device still listens to available networks, and you can use available WLAN networks as usual.

Batt

ery

info

rmat

ionBattery inform

Charging and dischaYour device is powered by a rechargeperformance of a new battery is achthree complete charge and dischargebe charged and discharged hundredseventually wear out. When the talk anoticeably shorter than normal, replaNokia approved batteries, and recharNokia approved chargers designated

If a replacement battery is being usethe battery has not been used for a pbe necessary to connect the chargerreconnect it to begin charging the b

Unplug the charger from the electricwhen not in use. Do not leave a fullyconnected to a charger, since overchlifetime. If left unused, a fully chargecharge over time.

If the battery is completely dischargeminutes before the charging indicatoor before any calls can be made.

Use the battery only for its intendedcharger or battery that is damaged.

ationrgingable battery. The full

ieved only after two or cycles. The battery can of times but it will nd standby times are

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.

Copyright © 2006 Nokia. All rights reserved. 115

ce the battery. Use only ge your battery only with for this device.

d for the first time or if rolonged period, it may

then disconnect and attery.

al plug and the device charged battery arging may shorten its d battery will lose its

d, it may take a few r appears on the display

purpose. Never use any

Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.

Copyright © 2006 Nokia. All

Batt

ery

info

rmat

ion

116

Nokia battery authguidelinesAlways use original Nokia batteriethat you are getting an original Nfrom an authorized Nokia dealer, Enhancements logo on the packaghologram label using the followin

Successful completion of the fourassurance of the authenticity of treason to believe that your batteryNokia battery, you should refrain fcannot be verified, return the batte

entication

s for your safety. To check okia battery, purchase it look for the Nokia Original ing and inspect the g steps:

steps is not a total

Authenticate hologram

1 When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.

2 When you angle the hologram left,

rights reserved.

he battery. If you have any is not an authentic original rom using it. If authenticity ry to the place of purchase.

right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.

Batt

ery

info

rmat

ionWhat if your battery is not authent

If you cannot confirm that your Nokhologram on the label is an authenticnot use the battery. The use of a batby the manufacturer may be dangeroperformance and damage to your deviIt may also invalidate any approval ordevice.

To find out more about original Nokiwww.nokia-asia.com/batterycheck.

ic?

ia battery with the Nokia battery, please do tery that is not approved us and may result in poor ce and its enhancements. warranty applying to the

a batteries, visit

Copyright © 2006 Nokia. All rights reserved. 117

11

ndsfree HF-6W

CK-7W

CR-39

update) DC-4

MU-18

MU-23

MU-24

SU-8W

SU-1B

AC-4

AC-5

ents are described in detail below.


Nok

ia o

rigin

al e

nhan

cem

ents

8

Nokia original enhancements

A new extensive range of enhancements is available for your phone. Select the enhancements which accommodate your specific communication needs. List of compatible enhancements:

Audio

Headset HS-5

Boom Headset HDB-4

Music Stereo Headset HS-20+AD-41

Fashion Stereo Headset HS-31

Inductive Loopset LPS-4

Wireless Headset HDW-3

Wireless Clip-on Headset HS-21W

Wireless Boom Headset HS-4W

Wireless Headset HS-11W

Wireless Image Headset HS-13W



Audio Adapter AD-15

Car

Wireless Plug-in Car Ha

Advanced Car Kit

Universal Holder

Mobile Charger (LCH-12

Data

Mini SD card 256 MB

Mini SD card 512 MB

Mini SD card 1GB

Messaging

Wireless Keyboard

Digital Pen

Power

Travel Charger

Travel Charger

Some of the enhancem


Nok

ia o

rigin

al e

nhan

cem

ents

119

Headset HS-26W

elegant: the Nokia Wireless eal handsfree solution for those money.

tooth wireless technology

mfortably over either ear

wer/end button

- adjust audio levels easily from


Copyright © 20

For availability of the enhancements, please check with your local dealer. A few practical rules for enhancements operation:

• Keep the enhancements out of small children’s reach.

• When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

• Check regularly that all mobile phone equipment in a vehicle dismounted and operating properly.

Use only batteries, chargers and enhancements approved by the phone manufacturer. The use of any other types may invalidate any approval or warranty applying tithe phone, and may be dangerous.

Battery

# Variation in operation times may occur depending on SIM card, network and usage settings, usage style and environments.

Nokia Wireless

Easy to use, versatile, andHeadset HS-26W is an idwho want good value for

Key Features:

• Classic style with Blue

• Elastic earhook fits co

• Convenient, large ans

• Handy volume controlthe headset

Type Tech Talktime# Standby#

BP-6M LiPolymer

up to 2.3~3.7hrs(WCDMA)/4.5~5.1hrs (GSM)

up to 7.5~10days(WCDMA)/8.9~10days (GSM)

12

handsfree control for mobile

g) and comfortable to wear with p

time and up to 110 hours standby

al Holder CR-39

ety of Nokia and other evices. It holds your compatible place and gives you flexibility to vice today and tomorrow.



Nok

ia o

rigin

al e

nhan

cem

ents

0

• Controls: answer/end call, redial, activate voice dial, mute, volume control, switch between phone and handsfree modes

• Choose between two colors: black and white

• Up to 5 hours of talk time and up to 150 hours standby

Nokia Wireless Headset HS-36W

Forget looking for the phone. The Nokia Wireless Headset HS-36W gives you handsfree functionality in one comfortable and easy-to-use package.

Key Features:

• Convenient wirelessphones

• Lightweight (only 20an adjustable earloo

• Up to 6 hours of talk

Nokia Univers

It supports a broad varimanufacturers mobile dmobile device firmly in choose a compatible de


Nok

ia o

rigin

al e

nhan

cem

ents

121


Copyright © 20

The new stylish design will complement your mobile phone. Insert your compatible mobile device into the Nokia Universal Holder and simply fasten it by pressing the clamps - release it by depressing a button.

12

cloth to clean any lenses (such as sor, and light sensor lenses). or an approved replacement d antennas, modifications, or mage the device and may violate radio devices.

p of data you want to keep (such as r notes) before sending your device to

reset, power the device off, and om time to time for optimum ack-up copies of all important data.

ons apply equally to your device, nhancement. If any device is not to the nearest authorized service



Care

and

mai

nten

ance

2

Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity, and all types

of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

• Use a soft, clean, dry camera, proximity sen

• Use only the suppliedantenna. Unauthorizeattachments could daregulations governing

• Use chargers indoors.• Always create a backu

contacts and calendaa service facility.

• To allow the device toremove the battery frperformance. Make b

All of the above suggestibattery, charger, or any eworking properly, take it facility for service.


Addi

tiona

l saf

ety

info

rmat

ion

123

smitting equipment, including fere with the functionality of dical devices. Consult a physician medical device to determine if d from external RF energy or if you off your device in health care ions posted in these areas instruct ealth care facilities may be using nsitive to external RF energy.

recommend that a minimum ters (6 inches) be maintained nd a pacemaker to avoid potential aker. These recommendations are

ndent research by and ess Technology Research. Persons

more than 15.3 centimeters cemaker

a breast pocketear opposite the pacemaker to for interference.

, switch off your device, and move


Copyright © 20

Additional safety informationYour device and its enhancements may contain small parts. Keep them out of the reach of small children.

Operating environment

Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 1.5 centimeters (5/8 inches) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.

In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.

Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.

Medical devices

Operation of any radio tranwireless phones, may interinadequately protected meor the manufacturer of thethey are adequately shieldehave any questions. Switchfacilities when any regulatyou to do so. Hospitals or hequipment that could be se

Pacemakers Pacemaker manufacturers separation of 15.3 centimebetween a wireless phone ainterference with the pacemconsistent with the indeperecommendations of Wirelwith pacemakers should:• Always keep the device

(6 inches) from their pa• Not carry the device in• Hold the device to the

minimise the potential

If you suspect interferencethe device away.

12

lying in aircraft is prohibited. Switch rding an aircraft. The use of wireless

may be dangerous to the operation e wireless telephone network, and

e environments

hen in any area with a potentially d obey all signs and instructions. ospheres include areas where you d to turn off your vehicle engine. d cause an explosion or fire resulting eath. Switch off the device at ear gas pumps at service stations. e use of radio equipment in fuel ibution areas, chemical plants or s are in progress. Areas with a osphere are often but not always ude below deck on boats, chemical ies, vehicles using liquefied ropane or butane), and areas where ls or particles such as grain, dust, or



Addi

tiona

l saf

ety

info

rmat

ion

4

Hearing aids Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Using your device while foff your device before boateledevices in an aircraftof the aircraft, disrupt thmay be illegal.

Potentially explosiv

Switch off your device wexplosive atmosphere, anPotentially explosive atmwould normally be adviseSparks in such areas coulin bodily injury or even drefueling points such as nObserve restrictions on thdepots, storage, and distrwhere blasting operationpotentially explosive atmclearly marked. They incltransfer or storage facilitpetroleum gas (such as pthe air contains chemicametal powders.


Addi

tiona

l saf

ety

info

rmat

ion

125


Copyright © 20

Emergency calls

Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.

To make an emergency call:1 If the device is not on, switch it on. Check for adequate

signal strength. Some networks may require that a valid SIM card is properly inserted in the device.

2 Press as many times as needed to clear the display and ready the device for calls.

3 Enter the official emergency number for your present location. Emergency numbers vary by location.

4 Press the key.

If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information.

When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.

12

this device when tested for use at

nding on national reporting and the network band. Use of device

ents may result in different SAR formation may be provided under ww.nokia-asia.com.

e devices used by the public is 2.0rams of body tissue. The guidelines margin of safety to give additional and to account for any variations in es may vary depending on national nd the network band. For SAR ons, please look under product ia.com.



Addi

tiona

l saf

ety

info

rmat

ion

6

Certification information (SAR)THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES

Your mobile device is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) recommended by international guidelines (ICNIRP). These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The guidelines include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is 2.0 watts/kilogram (W/kg)*. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output of the device.

The highest SAR value forthe ear is 0.54 W/kg.

SAR values may vary depetesting requirements andaccessories and enhancemvalues. Additional SAR inproduct information at w

* The SAR limit for mobilW/kg averaged over 10 gincorporate a substantialprotection for the public measurements. SAR valureporting requirements ainformation in other regiinformation at www.nok


sequence mode 25still image camera settings 24video recorder settings 22icates 104fication information (SAR) 126 screenSee standby mode 13alarm 13settings 14s 102lock codePIN code 103PIN2 code 103security code 103uter connections 82rence call 52

ection settings 99ct cards 62

inserting pictures 62sending 62storing DTMF tones 59ingcontacts between the SIM

card and device memory 63


IndAaccess poi

settinactivation alarms

alarmapplication

instalJava 1

Bbacking upBattery 11Battery inf

type 1Bluetooth

connedeviceheadspairinsecuriswitch

bookmarks

Copyright © 20

exnts 99gs 99keys 110

clock 13s

ling 10807

189ormation1978cting two devices, pairing 80 address 80et 106g 80ty 79ing off 81 65

Ccache, clearing 67calendar

create entries 69synchronizing PC Suite 69

call registerSee log

callsdialled numbers 60duration 60international 52received 60settings 98settings for call diverting 105transferring 59

cameraadjusting lighting and color 26editing videos 29flash 26image setup settings 26imaging mode 9saving video clips 21scenes 26self-timer 25

certifCerticlear

clock

code

compconfeconnconta

copy

12

ernet access points (IAP)See access points

aSee applications

k code 103

erasing contents 61filtering 61

duration 61pset settings 106dspeaker 13

ilbox 45automatic retrieving 46

dia filesfast forward 74file formats 73mute sound 74rewind 74

moryclearing memory 19, 60viewing memory consumption 19

mory card 18nu, rearranging 93


Copyright © 2006 Nokia. All rights reserved.8

copyright protectionsee activation keys

Ddata connections

details 83ending 83indicators 12

date 13device manager 84digital rights management, DRM

see activation keys

Eediting videos

adding effects 30adding sound clips 29adding transitions 30custom video clips 29

e-mail 42automatic retrieving 46opening 46remote mailbox 45retrieving from mailbox 45settings 49viewing attachments 46

Ffile formats

.jad 107

.jar 107, 108

.sis 108RealPlayer 73

file manager 19fixed dialing 63FM radio 71

Ggallery 28

backup files 38ordering files in albums 33presentations 33TV out mode 32

Hhandsfree

see loudspeakerheadset settings 106help application 20Home network 16

Iindicators 12Internet

See Web

Int

JJav

Lloclog

logloolou

Mma

me

me

meme


Bluetooth connectivity 79calendar 70call barring 105call diverting 105certificates 104data connections 99date and time 102display 98language 96lock code 103original settings 97personalizing the phone 93PIN code 103screen saver 98UPIN code 103UPUK code 104cuts 10cardcopying names and numbers

to phone 63messages 47names and numbers 63le 108ze 13are

transferring a file to your device 108

d clips 28


Copyright © 20

messaginge-mail 42multimedia messages 42text messages 41

modesfold closed 8fold open 9imaging 9view mode 10

movies, muveesquick muvees 76

multimedia messages 42music player 36mute sound 74

NNokia original enhancements 118

Ooffice applications 90

Ppacket data connections

settings 102PC connections 82PC Suite

calendar data 69synchronization 82transferring music files to

your memory card 36viewing device memory data 20

personalization 94phonebook

See contact cardsPIN code 103profiles 93

QQuickoffice 90

Rradio 71remote mailbox 45remote SIM mode 79ringing tones

personal ringing tone 64receiving in a text message 44

Sscenes

image scenes 27video scenes 27

security codeSee lock code

sendingcontact cards, business cards 62video clips 31

service commands 39settings

access codes 102access points 99

shortSIM

sis fisnoosoftw

soun

13


Copyright © 2006 Nokia. All rights reserved.0

soundsmuting a ringing tone 58recording sounds 89

speed dialling 53standby mode 93svg files 33synchronization 83

Ttext messages 41themes 94time 13transferring content from

another device 11

UUniversal Plug and Play 16

security 17UPIN code 103UPUK code 104USSD commands 39

Vvideo call 54

answering 58rejecting 58

video clips 28video player

See RealPlayer

Visual Radio 71viewing content 72visual service ID 72

voice commands 107voice dialling 53voice mailbox 52

changing the phone number 52diverting calls to voice mailbox 105

voice messages 52voice tags 107

making calls 53volume control 13

during a call 52loudspeaker 13

WWeb

access points, see access pointsbrowser 65

wireless LAN 15access point settings 100create IAP 15security 17see also Universal Plug and Play

User’s Guide for Nokia N93nds2.webapps.microsoft.com/.../phones/guides/...en.pdf · The wireless...

Documents

Transcript of User’s Guide for Nokia N93nds2.webapps.microsoft.com/.../phones/guides/...en.pdf · The wireless...