UPDATED ON JANUARY 4, 2020 Fl abe e - Blank Quilting · Fl abe e Quilt 1 By Color Pop Studio Skill...
Transcript of UPDATED ON JANUARY 4, 2020 Fl abe e - Blank Quilting · Fl abe e Quilt 1 By Color Pop Studio Skill...
A Free Project SheetNOT FOR RESALE
Finished Quilt Size: 65” x 85”49 West 37th Street, 14th floor, New York, NY 10018
Toll Free: 800-294-9495fax: 212-679-4578
www.blankquilting.netPlease check our website for pattern updates before starting this project.
FlorabelleFlorabelleFlorabelleFlorabelleQuilt 1
By Color Pop Studio
Skill Level: Intermediate
Qui
lt D
esig
n by
Hei
di P
ridem
ore
UPDATED ON JANUARY 4, 2020
FlorabelleFabrics in the Florabelle Collection
Select Fabrics from the Starlet Collection
Finished Quilt Size: 65” x 85”
Quilt 1
Panel - White9977P-01
Birds with Flowers - White9978-01
Leaves - White9980-01
Mini Floral - White9981-01
Mini Floral - Navy9981-77
Floral - Mint9982-60
Birds - White9984-01
Birds in BirdcagesMedium Blue – 9979-75
Coral6383-Coral
Navy6383-Navy
Teal6383-Teal
Turquoise6383-Turquoise
White6383-White
Page 1Florabelle Quilt 1
Cutting Instructions Please note: all strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.
Fig. 1
Materials1 panel Panel - White (A) 9977P-011 ⅜ yards Starlet - Navy (B) 6383-Navy*½ yard Mini Floral - Navy (C) 9981-77⅔ yard Leaves - White (D) 9980-01½ yard Starlet - White (E) 6383-White¼ yard Starlet - Teal (F) 6383-Teal1 ¼ yards Mini Floral - White (G) 9981-01½ yard Birds - White (H) 9984-01⅜ yard Starlet - Coral (I) 6383-Coral⅜ yard Starlet - Turquoise (J) 6383-Turquoise2 ⅛ yards Birds with Flowers - White (K) 9978-015 ¼ yards Mini Floral - White (Backing) 9981-01
*Includes binding
From the Panel - White (A):• Fussy cut (1) 23” x 43” panel.
From the Starlet - Navy (B), cut:• (3) 2 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2 ½” x 43” strips.• (2) 2 ½” x 27” WOF strips.• (4) 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2” x 70 ½” strips.• (3) 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 2” x 53 ½” strips.• (8) 2 ½” x WOF strips for the binding.
From the Mini Floral - Navy (C), cut:• (2) 5 ⅞” x WOF strips. Sub-cut (10) 5 ⅞” squares. Cut the squares across (1) diagonal to make (20) 5 ⅞” triangles. From the Leaves - White (D), cut:• (1) 6 ¼” x WOF strip. Sub-cut (5) 6 ¼” squares. Cut the squares across both diagonals to make (20) 6 ¼” triangles.• (2) 5 ⅞” x WOF strips. Sub-cut (10) 5 ⅞” squares. Cut the squares across (1) diagonal to make (20) 5 ⅞” triangles.
From the Starlet - White (E), cut:• (2) 6 ¼” x WOF strips. Sub-cut (7) 6 ¼” squares and (4) 5 ⅞” squares. Cut the 6 ¼” squares across both diagonals to make (28) 6 ¼” triangles. Cut the 5 ⅞” squares across (1) diagonal to make (8) 5 ⅞” triangles.
From the Starlet - Teal (F), cut:• (1) 6 ¼” x WOF strip. Sub-cut (2) 6 ¼” squares and (2) 5 ⅞” squares. Cut the 6 ¼” triangles across both diagonals to make (8) 6 ¼” triangles. Cut the 5 ⅞” squares across (1) diagonal to make (4) 5 ⅞” triangles.
From the Mini Floral - White (G), cut:• (2) 5 ½” x 40 ½” Length of Fabric (LOF) strips.• From the remaining fabric, cut (2) 5 ½” x 20 ½” WOF strips.
From the Birds - White (H), cut:• (1) 8” x WOF strip. Sub-cut (4) 5 ½” x 8” strips.• (1) 5 ½” x WOF strip. Sub-cut (4) 5 ½” x 8” strips.
From the Starlet - Coral (I), cut:• (3) 1 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 55 ½” strips.• (2) 1 ½” x 37 ½” WOF strips.
From the Starlet - Turquoise (J), cut:• (3) 2” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 1 ½” x 57 ½” strips.• (2) 2” x 40 ½” WOF strips.
From the Birds with Flowers - White (K), cut:• (2) 6 ½” x 73 ½” LOF strips.• From the remaining fabric cut (2) 6 ½” x 65 ½” WOF strips, piece as needed.
From the Mini Floral - White (Backing), cut:• (2) 93” x WOF strips for the backing. Sew the strips together and trim to make the 73” x 93” back.
B
A
Trim blockto measure
25 ½” x 45 ½”AFTER adding
borders
BCenter Block
B B
Block Assembly Note: Pay attention to the unit orientations when assembling the various components.1. Sew (1) 2 ½” x 43” Fabric B strip to each side of the 23” x 43” Fabric A panel. Sew (1) 2 ½” x 27” Fabric B strip to the top and to the bottom of the Fabric A panel. Trim the block to measure 25 ½” x 45 ½” to make the Center Block (Fig. 1).
ED
C
Unit 1make 8
Fig. 2
2. Sew together (1) 6 ¼” Fabric E triangle and (1) 6 ¼” Fabric D triangle to make (1) ED triangle. Sew (1) 5 ⅞” Fabric C triangle to the long side of the ED triangle to make (1) Unit 1 square (Fig. 2). The unit should measure 5 ½” square. Repeat to make (8) Unit 1 squares total.
Page 2Florabelle Quilt 1
Fig. 7
Fig. 8 Fig. 9
Fig. 10 Fig. 13
Fig. 11
Fig. 12
Fig. 5 Fig. 6
DD
E
Unit 2make 2
DE
F
Unit 3make 4
D
EF
Unit 4make 4
D
DE
Unit 5make 2
DE
C
Unit 6make 8
DE
Unit 7make 8
FC
Unit 8make 4
H HUnit1
Unit3
Unit4
Unit6
Inner Pieced Top/Bottom Bordermake 2
G
Unit7
Unit6
Unit7
Unit1
Outer PiecedSide Border
make 2
GUnit1
Unit6
Unit8
Unit8
Unit7
Unit7
Outer Pieced Top/Bottom Bordermake 2
Fig. 3 Fig. 4
3. Repeat Step 2 and refer to Figures 3-7 for fabric identification and placement to make (2) Unit 2 squares, (4) Unit 3 squares, (4) Unit 4 squares, (2) Unit 5 squares and (8) Unit 6 squares.
4. Sew (1) 5 ⅞” Fabric E triangle and (1) 5 ⅞” Fabric D triangle together along the long sides to make (1) Unit 7 square (Fig. 8). The block should measure 5 ½” square. Repeat to make (8) Unit 7 squares total.
5. Repeat Step 4 and refer to Figure 9 for fabric identification and placement to make (4) 5 ½” Unit 8 squares.
7. Sew together (1) 5 ½” x 8” Fabric H strip (1) Unit 1 square, (1) Unit 4 square, (1) Unit 3 square, (1) Unit 6 square and (1) 5 ½” x 8” Fabric H strip, in that order, to make the Inner Pieced Top Border (Fig. 11). Repeat to make the Inner Pieced Bottom Border.
6. Sew together (1) 5 ½” x 8” Fabric H strip, (1) Unit 1 square, (1) Unit 2 square, (1) Unit 3 square, (1) Unit 4 square, (1) Unit 5 square, (1) Unit 6 square and (1) 5 ½” x 8” Fabric H strip, in that order from top to bottom, to make (1) Inner Pieced Side Border (Fig. 10). Repeat to make a second Inner Pieced Side Border.
8. Sew together (1) Unit 7 square, (1) Unit 6 square, (1) 5 ½” x 40 ½” Fabric G strip, (1) Unit 1 square and (1) Unit 7 square, in that order from top to bottom, to make (1) Outer Pieced Side Border (Fig. 12). Repeat to make a second Outer Pieced Side Border.
9. Sew together (1) Unit 8 square, (1) Unit 7 square, (1) Unit 1 square, (1) 5 ½” x 20 ½” Fabric G strip, (1) Unit 6 square, (1) Unit 7 square and (1) Unit 8 square, in that order, to make the Outer Pieced Top Border (Fig. 13). Repeat to make the Outer Pieced Bottom Border.
Unit1
Unit2
Unit3
Unit4
Unit5
Unit6
Inner PiecedSide Border
make 2
H
H
©2019 Blank Quilting Corp.
Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.blankquilting.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.
Page 3Florabelle Quilt 1
Quilt Layout
Quilt Top Assembly (Follow the Quilt Layout while assembling the quilt top.)10. Sew (1) Inner Pieced Side Border to each side of the Center Block. Sew the Inner Pieced Top Border and Inner Pieced Bottom Border to the top and to the bottom of the Center Block.
11. Sew (1)1 ½” x 55 ½” Fabric I strip to each side of the Center Block. Sew (1) 1 ½” x 37 ½” Fabric I strip to the top and to the bottom of the Center Block.
12. Sew (1) 2” x 57 ½” Fabric J strip to each side of the Center Block. Sew (1) 2” x 40 ½” Fabric J strip to the top and to the bottom of the Center Block.
13. Sew (1) Outer Pieced Side Border to each side of the Center Block. Sew the Outer Pieced Top Border and Outer
Pieced Bottom Border to the top and to the bottom of the Center Block.
14. Sew (1) 2” x 70 ½” Fabric B strip to each side of the Center Block. Sew (1) 2” x 53 ½” Fabric B strip to the top and to the bottom of the Center Block.
15. Sew (1) 6 ½” x 73 ½” Fabric K strip to each side of the Center Block. Sew (1) 6 ½” x 65 ½” Fabric K strip to the top and to the bottom of the Center Block to make the quilt top.
16. Layer and quilt as desired.
17. Sew the (8) 2 ½” x WOF Fabric B strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.
18. Bind as desired.
K
K K
K
J
J J
J
I
I I
I
B
B B
B
Center Block