University of Engineering and Technology Lahore, Pakistan by Dr. Muhammad Mahmood Aslam Bhutta...

C A D 31/03/2012

University of Engineering and Technology

Lahore, Pakistan

by

Dr. Muhammad Mahmood Aslam Bhutta

Department of Mechanical Engineering

PakistanLahore

DR. Muhammad Mahmood Aslam Bhutta Lahore,Pakistan

All the mathematical sciences are founded on relations between physical laws and laws of numbers, so that the aim of exact science is to reduce the problems of nature to the determination of quantities by operations with numbers.

James Clerk Maxwell, 1856


In the late 70 this approach (the use of supercomputers to solve aerodynamic problems began to pay off. One early success was the experimental NASA aircraft called HIMAT (Highly Maneuverable Aircraft Technology), designed to test concepts of high maneuverability for the next generation of fighter planes. Wind tunnel tests of a preliminary design for HiMAT showed that it would have unacceptable drag at speeds near the speed of sound; if built that way the plane would be unable to provide any useful data. The cost of redesigning it in further wind tunnel tests would have been around $150,000 and would have unacceptably delayed the project. Instead, the wing was redesigned by a computer at a cost of $6,000.

Paul E. Ceruzzi, Curator, National Air and Space Museum, in Beyond the Limits, The MIT Press, 1989


Geometry KernelA geometry kernel offers basic geometric

objects, such as points, lines, segments, rays, planes, circles, ..., and geometric primitives operating on these objects, e.g., the computation of the area of the triangle defined by three points and the computation of the intersection of two lines.


As a geometric kernel, ACIS is second generation system, coming after the first generation Romulus

ACIS stands for Alan, Charles, Ian's System (Alan Grayer, Charles Lang and Ian Braid (Three-Space Ltd.)

Alan, Charles, Ian and Spatial The system was later on sold to Spatial Technology,(now Spatial Corp).

The first version of ACIS was released in 1989 and was quickly licensed by HP for integration into its ME CAD software.

ACIS

http://en.wikipedia.org/wiki/Romulus_(b-rep_solid_modeler)

http://en.wikipedia.org/wiki/Spatial_Corp

http://en.wikipedia.org/wiki/Hewlett-Packard


STLAn STL file is a triangular representation of a 3D

surface geometry. The surface is logically converted into a set of oriented triangles (facets). Each facet is described by the unit outward normal and three points listed in counterclockwise order representing the vertices of the triangle.

The STL standard includes two data formats - ASCII and binary. While the ASCII form is more descriptive, the binary form is far more common due to the very large resulting size of the CAD data when saved in the ASCII format.


Initial Graphics Exchange Specification (IGES)(pronounced eye-jess)

It defines a neutral data format that allows the digital exchange of information among Computer-aided design (CAD) systems.

The IGES project was started in 1979 by a group of CAD users and vendors, including Boeing, General Electric, Xerox, Computer vision and Applicon, with the support of the National Bureau of Standards (now known as NIST) and the U.S. Department of Defense (DoD).

IGES

http://en.wikipedia.org/wiki/General_Electric

http://en.wikipedia.org/wiki/Xerox

http://en.wikipedia.org/wiki/Computervision

http://en.wikipedia.org/wiki/Applicon

http://en.wikipedia.org/wiki/NIST

http://en.wikipedia.org/wiki/U.S._Department_of_Defense


GEOMETRIC REPRESENTATIO

N SCHEMES IN CAD SYSTEMS


1. Wire frame representation

2. Surface modeling schemes

3. Solid modeling schemes, including:

a. Constructive solid geometry (CSG) modeling

b. Boundary representation solid modeling

c. Sweep representations


Geometric modeling schemes

(a) Wire frame model(b) Surface model(c) Constructive solid geometry (CSG) model, (d) Boundary representation (B-rep) model(e) Sweep representations


• Wire frame representations contain only vertices (points) and edges (lines), which are the intersections of the surfaces of the object. No other information about the surfaces of the object is carried

• Wire frame models lack the surface definition for many of the analyses that might be required on the defined objects.


• Visualization of complex wire frame models can be confusing, as automatic hidden line removal and surface renderingare not possible.

• .


• A major disadvantage is that a unique object representation is not achieved, and wire frame models can often be interpreted in a number of different ways .

• The identification of manufacturing-related features is usually not possible and interpretation of the model into its manufacturing requirements is generally impossible to do automatically

University of Engineering and Technology Lahore, Pakistan by Dr. Muhammad Mahmood Aslam Bhutta...

Documents

Transcript of University of Engineering and Technology Lahore, Pakistan by Dr. Muhammad Mahmood Aslam Bhutta...