United 2014 Complete Bike Catalogue

C O M P L E T E B I K E S 2 0 1 4

MARTINEZ PRO MARTINEZ EXPERT MARTINEZ KL40 PRO

KL40 EXPERT KL40 SUPREME SUPREME 18

RECRUIT RECRUIT JR RECRUIT 18 RECRUIT 16

wel

com

e

Welcome to the 2014 complete bike offering from United.

Year after year we set ourselves higher and higher standards to keep evolving and improving on our line of bikes, this year we have taken a few bold steps and revamped the whole line by retiring some older models and introducing a whole new

signature line for Corey Martinez.

Firstly you’ll notice there is no longer the 1,2 & 3 levels in the Recruit and Supreme line, we wanted to simplify the whole collection, and by doing this have been able to refine and tweak all the models to cater more for personal and individual tastes.

The Recruit line which now has a 16” option is still our staple range for the younger and entry level rider, this years Supreme features some ultra responsive geometry and is set up with a very modern street specific feel. The KL40 line continues where it set the standard last year with three bikes that are suited to dirt and park riders from entry to pro level abilities, and the brand new Corey Martinez signature line is built for the streets with models set up and built to be exact replica’s of

Corey’s personal ride.

We are constantly looking at minor tweaks and adjustments to make the bikes better to ride, more durable, easier to build and generally a more pleasant experience for any customer that decides to pick one up. This year all models from the 16” up feature the same precision sealed 4 pawl ultra loud cassette hub that was only found on the high end bikes in 2013, we have looked at all the frame and bar geometry to improve the handling of the bikes and introduced new tyres and new grips to keep these bikes right at the highest end of complete bikes

available right out of the box.

We hope you enjoy taking time to check out the bikes in full detail, thanks for the support.

X CINEMA COMPLETELIMITED EDITION NEW FOR FEBRUARY 2014

2014 UNITED X CINEMA

KEY FEATURES

• LIMITED EDITION

• CINEMA ZX FRONT AND REAR HUBS

• CINEMA 333 DOUBLE WALL RIMS

• CINEMA P3 PEGS X 4

• CINEMA ALLOY VALVE CAPS

• UNITED X CINEMA PIVOTAL SEAT

• STREET SPECIFIC FRAME & HANDLEBAR GEOMETRY

• 4130 CROMO TOP TUBE, DOWN TUBE & CHAIN STAYS

• REMOVABLE BRAKE MOUNTS AND GUIDES

• FULL 4130 CROMO TAPERED FORKS WITH SLIM TOP CAP

• INTEGRATED HEAD TUBE

• DOWN TUBE GUSSET WITH EMBOSSED LOGO

• LARGER DUAL RADIUS BEND HANDLEBARS

• UNITED TOP LOAD STEM

• DUO RESILITE PEDALS

• UNITED DIRECT 20 X 2.3 PINSTRIPE FRONT AND REAR TYRES

• COMES WITH UNITED NYLON PARTS BAG

TOP TUBE 20.65”-FRAME 4130 cromo down tube, top tube & chain stays, removable brake mounts and guides, integrated head tube, mid bb, oval down tube CNC brake bridge, embossed logo downtube gusset-GEOMETRY HT: 75.5° / CS: 13.25” / SO: 8.35” / BB: 11.8” / ST: 69°-FORKS 100% 4130 cromo with cnc steerer, integrated bearing race, tapered legs with angled ends and cnc dropout holes-HANDLEBARS 8.75” x 28” 1020 hi tensile steel with larger radius bends, 2.5° up sweep, 11° back sweep-GRIPS United fl angeless & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach high rise top load stem with United logos and forged detailing on sides and top plate-LEVER Alloy-

BRAKE Tektro 990-CRANKS 3pc 175mm, heat treated tubular cromo, 8 spline-BB United sealed bearing mid-SPROCKET United 25t, steel-PEDALS Duo ‘Resilite’-CHAIN Taya 410-REAR RIM Cinema 333 double wall 36h-FRONT RIM Cinema 333 double wall 36h-REAR HUB Cinema ZX 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver-FRONT HUB Cinema ZX 36h alloy, 10mm female-

REAR TYRE United Direct 20 x 2.3”-FRONT TYRE United Direct 20 x 2.3”-SEAT United x Cinema mid pivotal-SEAT POST United alloy pivotal-SEAT CLAMP Invest cast integrated w/frame-PEGS Cinema P3 Pegs x 4-WEIGHT 25.3 lbs / 11.47 kg-COLOURS Gloss red to black fade-MISC Cinema alloy valve caps & United nylon parts bag-

United Direct 20 x 2.3”

United Direct 20 x 2.3”

United x Cinema mid pivotal

United alloy pivotal

Invest cast integrated

Cinema P3 Pegs x 4

25.3 lbs / 11.47 kg

Gloss red to black fade

Cinema alloy valve caps & United

UNIT

ED X

CIN

EMA

UNIT

ED X

CIN

EMA

2014 UNITED RECRUIT

LIMITED EDITION COLOURWAY

NEW FOR FEBRUARY 2014

KEY FEATURES



• PRO LEVEL FRAME GEOMETRY

• UNITED GRIPS & BAR ENDS

• 25/9T GEARING

• SEALED MID BB

• 170MM CROMO CRANKS

• SLIM NYLON PEDALS

• UNITED DIRECT 20 X 2.3 FRONT TYRE

• UNITED DIRECT 20 X 2.1 REAR TYRE

• PREMIUM COLOUR FINISHES

2014

REC

RUIT

2014

REC

RUIT

2014 UNITED KL40



KEY FEATURES

• KYE & LEO FORTE SIGNATURE LINE




• UNITED 50MM REACH TOP LOAD STEM

• 25/9T GEARING

• SEALED MID BB


• AERO STYLE FRONT RIM


UNIT

ED 2

014

KL4

0

UNIT

ED 2

014

KL4

0

2014 UNITED KL40 EXPERT

KEY FEATURES






• SEALED MID BB




2014

KL4

0 EX

PERT

2014

KL4

0 EX

PERT

MAR

TIN

EZ

MARTINEZ PROUPGRADES OVER 2014 MARTINEZ EXPERT

• 100% JAPANESE 4130 CROMO FRAME• L/R SWITCHABLE ULTRA LOUD, SEALED 4 PAWL CASSETTE HUB• LARGER DUAL RADIUS BEND 100% 4130 CROMO HANDLEBARS• 28T ALLOY UNITED SPROCKET WITH CNC DETAILING• 110 PSI UNITED SWERVE 20 X 2.25 TYRES FRONT & REAR• HEAT TREATED 175MM 48 SPLINE CROMO CRANKS• CINEMA 777 DOUBLE WALL 36H ALLOY RIMS• UNITED NYLON PIVOTAL POST• 4 PEGS

COREY MARTINEZ SIGNATURE LINE

MARTINEZ PRO

2014 UNITED MARTINEZ PRO

KEY FEATURES

• COREY MARTINEZ SIGNATURE LINE

• FULL CROMO TAPERED FORKS WITH SLIM RECESSED TOP CAP



• NEW UNITED CNC MACHINED FRONT LOAD STEM

• SEALED BEARING ALLOY FEMALE BOLT FRONT HUB

• TOP AND DOWN TUBE GUSSET WITH EMBOSSED LOGO

• UNITED MARTINEZ FAT PIVOTAL SEAT



• UNITED FLANGELESS GRIPS & BAR ENDS

• 28/9T GEARING

• SEALED MID BB


TOP TUBE 20.85”-FRAME 100% 4130 Japanese cromo tub-ing with removable brake mounts and guides, integrated head tube, mid bb, embossed tt/dt logo gussets-GEOMETRY HT: 75.5° / CS: 13.2”-13.65” / SO: 8.8” / BB: 11.8” / ST: 69°-FORKS 100% 4130 cromo with 1pc cnc steerer, integrated bearing race, tapered legs with angled ends and cnc dropout holes-HANDLEBARS 8.85” x 28.5” 100% 4130 cromo with large dual radius bends, 2° up sweep, 10° back sweep-GRIPS United flangeless & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach CNC front load stem with United logos and machined recess for flush top cap fit-LEVER Alloy-

BRAKE Tektro 990-CRANKS 3pc 175mm, heat treated cromo, L/R compatible arms, 48 spline-BB United sealed bearing mid-SPROCKET United 28t, 6061 alloy CNC-PEDALS Duo ‘Resilite’-CHAIN Taya 410-REAR RIM Cinema 777 36h, double wall-FRONT RIM Cinema 777 36h, double wall-REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t L/R switchable driver, 4 pawl, ultra loud mechanism-FRONT HUB 36h sealed alloy, 10mm, female bolt-REAR TYRE United Swerve 20 x 2.25”, 110 psi-

FRONT TYRE United Swerve 20 x 2.25”, 110 psi-SEAT United Martinez fat pivotal-SEAT POST United nylon pivotal-SEAT CLAMP Alloy with machined detail-PEGS 4 steel-WEIGHT 24 lbs / 10.88 kg-COLOURS High gloss pearl black & satin dark red-

MAR

TIN

EZ P

RO

MARTINEZ EXPERTUPGRADES OVER 2014 MARTINEZ

-• 100% 4130 CROMO FRAME

• REMOVABLE BRAKE MOUNTS AND GUIDES• 100% 4130 CROMO TAPERED FORKS WITH SLIM RECESSED TOP CAP

• 100% 4130 CROMO HANDLEBARS• NEW UNITED CNC MACHINED FRONT LOAD STEM

• SEALED BEARING ALLOY FEMALE BOLT FRONT HUB• 25T ALLOY UNITED SPROCKET

• DUO RESILITE PEDALS• DOUBLE WALL 36H ALLOY RIMS

• 2 PEGS


2014 UNITED MARTINEZ EXPERT

KEY FEATURES


• ULTRA LOUD, SEALED 4 PAWL CASSETTE HUB



• UNITED MARTINEZ MID PIVOTAL SEAT

• UNITED SWERVE 20 X 2.25 TYRES FRONT & REAR



• HEAT TREATED 170MM CROMO CRANKS

• 25/9T GEARING

• SEALED MID BB


TOP TUBE 20.65”-FRAME 100% 4130 cromo tubing with removable brake mounts and guides, integrated head tube, mid bb, embossed logo top and downtube gussets-GEOMETRY HT: 75° / CS: 13.25” / SO: 8.8” / BB: 11.8” / ST: 71°-FORKS 100% 4130 cromo with cnc steer-er, integrated bearing race, tapered legs with angled ends and cnc dropout holes-HANDLEBARS 8.6” x 28.5” 100% 4130 cromo with 2° up sweep, 10° back sweep-GRIPS United flangeless & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach CNC front load stem with United logos and machined recess for flush top cap fit-LEVER Alloy-BRAKE Tektro 990-

CRANKS 3pc 170mm, heat treated cro-mo, slimline arms, 8 spline-BB United sealed bearing mid-SPROCKET United 25t, 6061 alloy-PEDALS Duo ‘Resilite’-CHAIN Taya 410-REAR RIM Alloy 36h, double wall-FRONT RIM Alloy 36h, double wall- REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-FRONT HUB 36h sealed alloy, 10mm, fe-male bolt-REAR TYRE United Swerve 20 x 2.25”-

FRONT TYRE United Swerve 20 x 2.25”-SEAT United Martinez medium pivotal-SEAT POST United alloy pivotal-SEAT CLAMP Alloy with machined detail-PEGS 2 steel-WEIGHT 24 lbs / 10.88 kg-COLOURS Trans orange & gloss black-

MAR

TIN

EZ E

XPER

T

MARTINEZ


2014 UNITED MARTINEZ

KEY FEATURES


• 4130 CROMO DOWN TUBE




• ALLOY FEMALE BOLT FRONT HUB

• UNITED MARTINEZ PIVOTAL SEAT

• NEW UNITED 50MM REACH FRONT LOAD STEM

• UNITED SWERVE 20 X 2.25 TYRES FRONT & REAR




• 25/9T GEARING

• SEALED MID BB


TOP TUBE 20.5”-FRAME 4130 cromo top tube, welded brake mounts and guides, integrated head tube, mid bb, embossed logo top and downtube gussets-GEOMETRY HT: 75° / CS: 13.25” / SO: 8.8” / BB: 11.8” / ST: 71°-FORKS Cromo cnc steerer tube, inte-grated bearing race, tapered 1020 hi tensile steel legs with angled ends-HANDLEBARS 8.6” x 28.5” 1020 hi tensile steel with 2° up sweep, 10° back sweep-GRIPS United flangeless & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach front load stem with United logos and forged detailing on sides and front plate-LEVER Alloy-

BRAKE Tektro 990-CRANKS 3pc 170mm, heat treated cromo, slimline arms, 8 spline-BB United sealed bearing mid-SPROCKET United 25t, steel-PEDALS Nylon plastic-CHAIN Taya 410-REAR RIM Alloy 36h, single wall-FRONT RIM Alloy 36h, single wall-REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-FRONT HUB 36h alloy, 10mm, female bolt-REAR TYRE United Swerve 20 x 2.25”-

FRONT TYRE United Swerve 20 x 2.25”-SEAT United Martinez pivotal-SEAT POST United alloy pivotal-SEAT CLAMP Alloy-WEIGHT 24.9 lbs / 11.29 kg-COLOURS Matt black & high gloss dark nickel-

2014

MAR

TIN

EZ

KYE FORTEPHOTO BY DUNCAN SMITH

LEO FORTEPHOTO BY IAN MORRIS

KL4

0

KL40 PROUPGRADES OVER 2014 KL40 EXPERT

• 100% 4130 JAPANESE CROMO FRAME• BUILT IN CHAIN TENSIONERS• BULLET TIPPED CHAIN STAYS• SLIM KL40 100% CROMO FORKS WITH SLIM RECESSED TOP CAP• HEAT TREATED 100% 4130 CROMO HANDLEBARS• FULL CNC UNITED 53MM REACH TOP LOAD STEM• 2 PC 175MM HEAT TREATED CROMO 48 SPLINE CRANKS• DOUBLE WALL 36H ALLOY FRONT AND REAR RIMS• 110 PSI UNITED DIRECT & INDIRECT TYRES

KYE & LEO FORTE SIGNATURE LINE

2014 UNITED KL40 PRO

KEY FEATURES




• ULTRA LOUD, SEALED 4 PAWL, FEMALE BOLT CASSETTE HUB


• SEALED BEARING ALLOY FEMALE BOLT FRONT HUB

• UNITED KL40 SLIM PIVOTAL SEAT



TOP TUBE 21”-FRAME 100% 4130 Japanese cromo tubing, removable brake mounts and guides, integrated head tube, mid bb, integrated seat clamp, bullet tipped stays, built in chain tensioners -GEOMETRY HT: 74.5° / CS: 13.7”-14” / SO: 8.9” / BB: 11.6” / ST: 71°-FORKS 100% 4130 cromo with 1pc cnc steerer, integrated bearing race, tapered slim legs with angled ends and cnc dropout holes-HANDLEBARS 8.9” x 29” 100% heat treated 4130 cromo with large dual radius bends, thin crossbar, 1° up sweep, 12° back sweep-GRIPS United Alchemist & United ends-HEADSET United sealed bearing, int.-STEM United 53mm reach CNC top load stem with United logos and machined recess for flush top cap fit-

LEVER Alloy-BRAKE Tektro 990-CRANKS 2pc 175mm, heat treated cromo, 48 spline-BB United sealed bearing mid-SPROCKET United 28t, 6061 alloy CNC-PEDALS Duo ‘Resilite’-CHAIN Taya 410-REAR RIM Alloy 36h, double wall-FRONT RIM Alloy 36h, aero, double wall-REAR HUB 36h sealed alloy cassette hub with female axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-

FRONT HUB 36h sealed alloy, 10mm, female bolt-REAR TYRE United Direct 20 x 2.1”, 110 psi-FRONT TYRE United Indirect 20 x 2.35”, 110 psi-SEAT United KL40 slim pivotal-SEAT POST United nylon pivotal-SEAT CLAMP Invest cast, integrated w/frame-WEIGHT 23.3 lbs / 10.5 kg-COLOURS Teal/chrome fade & gloss black-

2014

KL4

0 PR

O

KL40 EXPERTUPGRADES OVER 2014 KL40

• 100% 4130 CROMO FRAME• REMOVABLE BRAKE MOUNTS AND GUIDES• FULL CROMO TAPERED FORKS WITH SLIM RECESSED TOP CAP• 100% 4130 CROMO HANDLEBARS• ULTRA LOUD, SEALED 4 PAWL, FEMALE BOLT CASSETTE HUB• DOUBLE WALL 36H ALLOY REAR RIM• DUO RESILITE PEDALS• SEALED BEARING ALLOY FEMALE BOLT FRONT HUB• UNITED KL40 SLIM PIVOTAL SEAT


2014 UNITED KL40 EXPERT

KEY FEATURES






• SEALED MID BB


TOP TUBE 21”-FRAME 100% 4130 cromo tubing with removable brake mounts and guides, integrated head tube, mid bb, embossed down tube logo gussets -GEOMETRY HT: 74.5° / CS: 13.7”-14” / SO: 8.75” / BB: 11.6” / ST: 71°-FORKS 100% 4130 cromo with cnc steerer, integrated bearing race, tapered legs with angled ends and cnc dropout holes-HANDLEBARS 8.65” x 29” 100% 4130 cromo with 1° up sweep, 12° back sweep-GRIPS United Alchemist & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach top load stem with United logos and forged detailing on sides and top plate-LEVER Alloy-

BRAKE Tektro 990-CRANKS 3pc 175mm, heat treated cromo, 8 spline-BB United sealed bearing mid-SPROCKET United 28t, steel

PEDALS Duo ‘Resilite’-CHAIN Taya 410-FRONT RIM Alloy 36h, double wall-REAR RIM Alloy 36h, aero, single wall-REAR HUB 36h sealed alloy cassette hub with female axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-FRONT HUB 36h sealed alloy, 10mm, female bolt-

REAR TYRE United Direct 20 x 2.1”-FRONT TYRE United Indirect 20 x 2.35”-SEAT United KL40 slim pivotal-SEAT POST United alloy pivotal-SEAT CLAMP Alloy with machined detail-WEIGHT 23.9 lbs / 10.84 kg-COLOURS Trans red & trans black-

2014

KL4

0 EX

PERT

KL40UPGRADES OVER 2013 KL40

• ULTRA LOUD, SEALED 4 PAWL CASSETTE HUB• 36H ALLOY FRONT HUB• IMPROVED FRAME & HANDLEBAR GEOMETRY• TAPERED FORKS• NEW UNITED SEAT• NEW UNITED INDIRECT 20 X 2.35 FRONT TYRE• NEW UNITED RUSHMORE GRIPS & BAR ENDS


2014 UNITED KL40

KEY FEATURES






• 25/9T GEARING

• SEALED MID BB





TOP TUBE 20.25”-FRAME 1020 hi ten, welded brake mounts, integrated head tube, mid bb, CNC brake bridge, embossed logo downtube gusset -GEOMETRY HT: 74.5° / CS: 13.25” / SO: 8.25” / BB: 11.6” / ST: 71°-FORKS Cnc steerer tube, integrated bearing race, tapered 1020 hi tensile steel legs-HANDLEBARS 8.25” x 28” 1020 hi tensile steel with 1° up sweep, 12° back sweep-GRIPS United Alchemist & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach top load stem with United logos and forged detailing on sides and top plate-LEVER Alloy-BRAKE Tektro 990

CRANKS 3pc 170mm, tubular cromo, 8 spline-BB United sealed bearing mid-SPROCKET United 25t, steel

PEDALS Nylon plastic-CHAIN Taya 410-FRONT RIM Alloy 36h, single wall-REAR RIM Alloy 36h, aero, single wall-REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-FRONT HUB 36h alloy, 10mm, -REAR TYRE United Direct 20 x 2.1”

FRONT TYRE United Indirect 20 x 2.35”-SEAT United KL40 combo-SEAT POST Integrated with seat-SEAT CLAMP Alloy -WEIGHT 24.9 lbs / 11.29 kg-COLOURS Gloss black & high gloss blue-

UNIT

ED 2

014

KL4

0

CHRISTIAN RIGALPHOTO BY WALTER PIERINGER

NATHAN WILLIAMSPHOTO BY WALTER PIERINGER

SUPR

EME

SUPREME

2014 UNITED SUPREME

KEY FEATURES

• STREET SPECIFIC FRAME & HANDLEBAR GEOMETRY






• LARGER DUAL RADIUS BEND HANDLEBARS

• UNITED TOP LOAD STEM


• NEW UNITED RUSHMORE GRIPS

• SHORTER HEAT TREATED CROMO 165MM CRANKS


• FEMALE BOLT ALLOY FRONT HUB

• UNITED DIRECT 20 X 2.3 FRONT AND REAR TYRES

• NEW UNITED PIVOTAL SEAT

TOP TUBE 20.5” or 21” -FRAME 4130 cromo down tube, top tube & chain stays, removable brake mounts and guides, integrated head tube, mid bb, oval down tube CNC brake bridge, embossed logo downtube gusset-GEOMETRY HT: 75.5° / CS: 13.25” / SO: 8.35” / BB: 11.8” / ST: 69°-FORKS 100% 4130 cromo with cnc steerer, integrated bearing race, tapered legs with angled ends and cnc dropout holes-HANDLEBARS 8.75” x 28” 1020 hi tensile steel with larger radius bends, 2.5° up sweep, 11° back sweep-GRIPS United Alchemist & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach high rise top load stem with United logos and forged detailing on sides and top plate-

LEVER Alloy-BRAKE Tektro 990-CRANKS 3pc 165mm, heat treated tubular cromo, 8 spline-BB United sealed bearing mid-SPROCKET United 25t, steel

PEDALS Duo ‘Resilite’-CHAIN Taya 410-REAR RIM Alloy 36h, single wall

FRONT RIM Alloy 36h, single wall

REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-

FRONT HUB 36h alloy, 10mm, female bolt-REAR TYRE United Direct 20 x 2.3”-FRONT TYRE United Direct 20 x 2.3”-SEAT United Supreme mid pivotal -SEAT POST United alloy pivotal-SEAT CLAMP Invest cast integrated w/frame-WEIGHT 24.6 lbs / 11.15 kg-COLOURS Gloss burgundy & gloss white-

2014

SUPR

EME

SUPREME 18UPGRADES OVER 2013 SUPREME 18

• ULTRA LOUD, SEALED 4 PAWL CASSETTE HUB• IMPROVED FRAME & HANDLEBAR GEOMETRY• UNITED DIRECT 18 X 2.1 TYRES

2014 UNITED SUPREME 18

KEY FEATURES






• SHORTER 120MM UNITED GRIPS & BAR ENDS

• SHORTER JR LEVER


• 25/9T GEARING

• SEALED MID BB


• UNITED PIVOTAL SEAT


TOP TUBE 18”-FRAME 4130 cromo down tube, top tube & chain stays, welded brake mounts, integrated head tube, mid bb, oval down tube, CNC brake bridge, embossed logo downtube gusset-GEOMETRY HT: 75° / CS: 12.25” / SO: 7.5” / BB: 10.75” / ST: 71°-FORKS 100% 4130 cromo with cnc steerer, integrated bearing race, tapered legs with angled ends and cnc dropout holes-HANDLEBARS 7.25” x 26” 1020 hi tensile steel with 1.5° up sweep, 11° back sweep-GRIPS United Jr & United ends-HEADSET United sealed bearing, int.-STEM United 40mm reach front load stem with United logos and forged detailing on sides and front plate-

LEVER Alloy-BRAKE Tektro 990-CRANKS 3pc 152mm, heat treated tubular cromo, 8 spline-BB United sealed bearing mid-SPROCKET United 25t, steel-PEDALS Junior size plastic-CHAIN Taya 410-REAR RIM Alloy 36h, single wall-FRONT RIM Alloy 36h, single wall-REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-

FRONT HUB 36h alloy, 10mm axle-REAR TYRE United Direct 18 x 2.1”-FRONT TYRE United Direct 18 x 2.1”-SEAT United Supreme jr pivotal -SEAT POST United alloy pivotal-SEAT CLAMP Alloy with machined detail-WEIGHT 20.2 lbs / 9.16 kg-COLOUR Trans blue-

2014

SUP

REM

E 18

2014 UNITED SUPREME PARTS KIT

KEY FEATURES

• PERFECT KIT FOR BUILDING AN AFFORDABLE CUSTOM BIKE• 100% CROMO FORKS WITH SLIM RECESSED TOP CAP• 8.85” X 28.5” LARGER DUAL RADIUS BEND 100% 4130 CROMO BARS• SEALED BEARING ALLOY FEMALE BOLT FRONT HUB• L/R SWITCHABLE ULTRA LOUD, SEALED 4 PAWL CASSETTE HUB• UNITED DIRECT 2.3” 110 PSI TYRES• HEAT TREATED 175MM 48 SPLINE CROMO CRANKS• CINEMA 777 DOUBLE WALL 36H ALLOY RIMS• 25T UNITED ALLOY SPROCKET WITH CNC DETAIL• TAYA CHAIN• DUO RESILITE PEDALS• UNITED HEADSET• FULL CNC UNITED 53MM REACH TOP LOAD STEM• UNITED RUSHMORE GRIPS & UNITED BAR ENDS• UNITED 2014 SUPREME SEAT• ALLOY PIVOTAL POST• ALLOY SEAT CLAMP

FORKS 100% 4130 cromo with 1pc cnc steerer, integrated bearing race, tapered legs with angled ends and cnc dropout holess-HANDLEBARS 8.85” x 28.5” 100% 4130 cromo with large dual radius bends, 2° up sweep, 10° back sweep-GRIPS United Alchemist & United ends-HEADSET United sealed bearing, int.-STEM United 53mm reach CNC top load stem with United logos and machined recess for flush top cap fit-CRANKS 3pc 175mm, heat treated cromo, L/R compatible arms, 48 spline-BB United sealed bearing mid-

SPROCKET United 25t, 6061 alloy CNC

PEDALS Duo ‘Resilite’-CHAIN Taya 410-REAR RIM Cinema 777 36h, double wall

FRONT RIM Cinema 777 36h, double wall-REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t L/R switchable driver, 4 pawl, ultra loud mechanism-FRONT HUB 36h sealed alloy, 10mm, female bolt-

REAR TYRE United Direct 20 x 2.3”, 110 psi-FRONT TYRE United Direct 20 x 2.3”, 110 psi-SEAT United Supreme mid pivotal -SEAT POST United alloy pivotal-SEAT CLAMP Alloy with machined detail w/frame-WEIGHT 17.5 lbs / 7.9 kg-COLOURS Black/polished, black/red, black/raw-

MIKE ESCAMILLAPHOTO BY PAUL LUNA

JIMMY RUSHMOREPHOTO BY IAN MORRIS

REC

RUIT

RECRUITUPGRADES OVER 2013 RECRUIT

• ULTRA LOUD, SEALED 4 PAWL CASSETTE HUB• 36H ALLOY FRONT HUB• IMPROVED FRAME & HANDLEBAR GEOMETRY• TAPERED FORKS• NEW UNITED SEAT• NEW UNITED 50MM REACH FRONT LOAD STEM

2014 UNITED RECRUIT

KEY FEATURES





• 25/9T GEARING

• SEALED MID BB






TOP TUBE 20”-FRAME 1020 hi ten, welded brake mounts, integrated head tube, mid bb, embossed logo top tube gusset-GEOMETRY HT: 75° / CS: 13.25” / SO: 8” / BB: 11.8” / ST: 71°-FORKS Cnc steerer tube, integrated bearing race, tapered 1020 hi tensile steel legs -HANDLEBARS 8.25” x 28” 1020 hi tensile steel with 1.5° up sweep, 11° back sweep-GRIPS United & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach front load stem with United logos and forged detailing on sides and top plate-LEVER Alloy-BRAKE 990-

CRANKS 3pc 170mm, tubular cromo, 8 spline-BB United sealed bearing mid-SPROCKET United 25t, steel-PEDALS Nylon plastic-CHAIN Taya 410-REAR RIM Alloy 36h, single wall-FRONT RIM Alloy 36h, single wall-REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-FRONT HUB 36h alloy, 10mm axle-

REAR TYRE United Direct 20 x 2.1”-FRONT TYRE United Direct 20 x 2.3”-SEAT United Recruit combo -SEAT POST Integrated with seat-SEAT CLAMP Alloy-WEIGHT 24.9 lbs / 11.29 kg-COLOURS High gloss dark red, matt black & high gloss green-

2014

REC

RUIT

RECRUIT JRUPGRADES OVER 2013 RECRUIT JR

• ULTRA LOUD, SEALED 4 PAWL CASSETTE HUB• 36H ALLOY FRONT HUB• IMPROVED FRAME & HANDLEBAR GEOMETRY• TAPERED FORKS• NEW UNITED SEAT• NEW UNITED 50MM REACH FRONT LOAD STEM

2014 UNITED RECRUIT JR

KEY FEATURES




• 25/9T GEARING

• SEALED MID BB



TOP TUBE 18.5”-FRAME 1020 hi ten, welded brake mounts, integrated head tube, mid bb, embossed logo top tube gusset-GEOMETRY HT: 75° / CS: 13.25” / SO: 7.8” / BB: 11.8” / ST: 71°-FORKS Cnc steerer tube, integrated bearing race, tapered 1020 hi tensile steel legs -HANDLEBARS 8” x 26” 1020 hi tensile steel with 1.5° up sweep, 11° back sweep-GRIPS United & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach front load stem with United logos and forged detailing on sides and top plate-LEVER Alloy -

BRAKE 990-CRANKS 3pc 165mm, tubular cromo, 8 spline -BB United sealed bearing mid-SPROCKET United 25t, steel-PEDALS Nylon plastic-CHAIN Taya 410-REAR RIM Alloy 36h, single wall-FRONT RIM Alloy 36h, single wall-REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-FRONT HUB 36h alloy, 10mm axle-

REAR TYRE United Direct 20 x 2.1”-FRONT TYRE United Direct 20 x 2.3”-SEAT United Recruit jr railed -SEAT POST Steel w/guts -SEAT CLAMP Alloy-WEIGHT 24.9 lbs / 11.29 kg-COLOUR Matt black-

2014

REC

RUI

T JR

RECRUIT 18UPGRADES OVER 2013 RECRUIT 18

• ULTRA LOUD, SEALED 4 PAWL CASSETTE HUB• 36H ALLOY FRONT HUB• IMPROVED FRAME GEOMETRY• TAPERED FORKS• UNITED JR SEAT• UNITED DIRECT 18 X 2.1 TYRES

2014 UNITED RECRUIT 18

KEY FEATURES




• SMALL JR SIZE LEVER

• SHORTER 120MM UNITED GRIPS

• JR SIZE NYLON PEDALS

• 25/9T GEARING

TOP TUBE 18”-FRAME 1020 hi ten, welded brake mounts, integrated head tube, mid bb, embossed logo top tube gusset-GEOMETRY HT: 75° / CS: 12.25” / SO: 7.5” / BB: 10.75” / ST: 71°-FORKS Cnc steerer tube, integrated bearing race, tapered 1020 hi tensile steel legs -HANDLEBARS 7.25” x 26” 1020 hi tensile steel with 1.5° up sweep, 11° back sweep-GRIPS United jr & United ends-HEADSET United sealed bearing, int.-STEM United 40mm reach front load stem with United logos and forged detailing on sides and top plate-

LEVER Alloy -BRAKE 990-CRANKS 3pc 152mm, tubular cromo, 8 spline -BB United sealed bearing mid-SPROCKET United 25t, steel-PEDALS Junior size plastic-CHAIN Taya 410-REAR RIM Alloy 36h, single wall

FRONT RIM Alloy 36h, single wall-REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-

FRONT HUB 36h alloy, 10mm axle-REAR TYRE United Direct 18 x 2.1”-FRONT TYRE United Direct 18 x 2.1”-SEAT United Recruit jr railed -SEAT POST Steel w/guts -SEAT CLAMP Alloy-WEIGHT 20.5 lbs / 9.2 kg-COLOURS Gloss white-

2014

REC

RUI

T 18

RECRUIT 16

2014 UNITED RECRUIT 16

KEY FEATURES

• NEW MODEL FOR 2014




• SMALL JR SIZE LEVER & GRIPS

• ULTRA LOUD, SEALED, 4 PAWL CASSETTE HUB

• UNITED JR SEAT

TOP TUBE 16”-FRAME 1020 hi ten, welded brake mounts, integrated head tube, mid bb, embossed logo top tube gusset-GEOMETRY HT: 75° / CS: 11” / SO: 6.75” / BB: 9.75” / ST: 71°-FORKS Cnc steerer tube, integrated bearing race, tapered 1020 hi tensile steel legs -HANDLEBARS 7” x 22.5” 1020 hi tensile steel with 1.5° up sweep, 11° back sweep-GRIPS Mushroom jr & United ends-HEADSET United sealed bearing, int.-STEM United 40mm reach front load stem with United logos and forged detailing on sides and top plate-LEVER Alloy-

BRAKE 990-CRANKS 3pc 140mm, tubular cromo, 8 spline -BB United sealed bearing mid-SPROCKET United 25t, steel-PEDALS Junior size plastic-CHAIN Taya 410-REAR RIM Alloy 32h, single wall

FRONT RIM Alloy 28h, single wall-REAR HUB 32h sealed alloy cassette hub with 14mm axle, sealed bear-ing 10t driver, 4 pawl, ultra loud mechanism

FRONT HUB 28h alloy, 10mm axle-REAR TYRE GMD 16 x 1.95”-FRONT TYRE GMD 16 x 1.95”-SEAT United Recruit jr railed-SEAT POST Steel w/guts -SEAT CLAMP Alloy-WEIGHT 19 lbs /8.6 kg-COLOUR Gloss orange-

2014

REC

RUI

T 16

X ETNIES RECRUIT

2014 UNITED X ETNIES RECRUIT

KEY FEATURES





• 25/9T GEARING

• SEALED MID BB






TOP TUBE 20”-FRAME 1020 hi ten, welded brake mounts, integrated head tube, mid bb, embossed logo top tube gusset-GEOMETRY HT: 75° / CS: 13.25” / SO: 8” / BB: 11.8” / ST: 71°-FORKS Cnc steerer tube, integrated bearing race, tapered 1020 hi tensile steel legs -HANDLEBARS 8.25” x 28” 1020 hi tensile steel with 1.5° up sweep, 11° back sweep-GRIPS United & United ends-HEADSET United sealed bearing, int.-STEM United 50mm reach front load stem with United logos and forged detailing on sides and top plate-LEVER Alloy-BRAKE 990-

CRANKS 3pc 170mm, tubular cromo, 8 spline-BB United sealed bearing mid-SPROCKET United 25t, steel-PEDALS Nylon plastic-CHAIN Taya 410-REAR RIM Alloy 36h, single wall-FRONT RIM Alloy 36h, single wall-REAR HUB 36h sealed alloy cassette hub with 14mm axle, sealed bearing 9t driver, 4 pawl, ultra loud mechanism-FRONT HUB 36h alloy, 10mm axle-

REAR TYRE United Direct 20 x 2.1”-FRONT TYRE United Direct 20 x 2.3”-SEAT United Recruit combo -SEAT POST Integrated with seat-SEAT CLAMP Alloy-WEIGHT 24.9 lbs / 11.29 kg-COLOURS Black/red, black/green & black/blue-

X ET

NIE

S R

ECR

UIT

unitedbikeco.com

NATHAN WILLIAMSPHOTO BY WALTER PIERINGER

United 2014 Complete Bike Catalogue

Documents

Transcript of United 2014 Complete Bike Catalogue