UNDERGRADUATE PROSPECTUS 2015-2016 - Official · PDF file106 Entry Requirements Prospectus...

PROSPECTUS2015-2016

UNDERGRADUATE

Prospectus 2016-2017.indd 1 11/12/2015 11:58 AM

UNDERGRADUATEPROSPECTUS

2015-2016


4

UNDERGRADUATE PROSPECTUS 2015/2016

CONTENTS

5 Malaysia On Your Doorstep

6 Welcome to Kuantan

7 Forward from Vice- Chancellor

8 Vision, Mission, Objectives, Philosophy and Core Values

9 Research and Development

10 Welcome to UMP

11 Academic Facilities and Resources

11 Library

11 Student Support Services

16 Academic Calendar

19 Faculty of Electrical & Electronics Engineering

26 Faculty of Civil Engineering & Earth Resources

31 Faculty of Manufacturing Engineering

38 Faculty of Mechanical Engineering

52 Faculty of Industrial Science & Technology

60 Faculty of Chemical & Natural Resources Engineering

65 Faculty of Computer Systems & Software Engineering

74 Faculty of Engineering Technology

85 Faculty of Industrial Management

95 Centre for Modern Languages and Human Sciences

99 Students Affairs and Alumni Department

102 Co-curriculum Centre

106 Entry Requirements


5


MALAYSIA ON YOUR DOORSTEP

Geographically, Malaysia is as diverse as its culture. Malaysia is divided into 13 states and three Federal Territories, separated by the South China Sea with 11 states and two federal territories (Kuala Lumpur and Putrajaya) in Peninsular Malaysia and two states and one federal territory (Labuan) in East Malaysia.

One of Malaysia’s key attractions is its extreme contrasts. Towering skyscrapers look down upon wooden houses built on stilts, and five-star hotels sit several meters away from ancient reefs. Cool hideaways are found in the highlands that roll down to warm, sandy beaches and rich, humid mangroves.

Pahang, which covers an area of 35,960 sq. km, is the largest state in Peninsular Malaysia. Pahang has so much to offer the visitor that tourists, both locals and foreign, come back again and again.Pahang has cool green mountains, rain forests, hill resorts, tranquil fishing villages, long stretches of sandy beaches, mysterious caves and unspoiled lakes.

With a population of one million, the state, which lies on the East Coast of Peninsular Malaysia offers the finest beaches such as the famous Cherating Beach, Teluk Chempedak and Beserah Beach. There are also renowned hill resorts of Cameron Highlands, Genting Highlands and Frasers Hill. If you are looking for an adventure, why not visit parks such as Kenong Rimba, Endau-Rompin and Taman Negara (National Park).


6


PAHANG

WELCOME TO KUANTANKuantan, the capital of the state of Pahang is the gateway to an adventurous, thrilling and exhilarating tropical holiday.

The town, located on the east of the state of Pahang facing the blue South China Sea, is fast developing into a modern commercial center while still retaining its unique age-old charm and heritage. Modern high-rise structures cohabit harmoniously with pre-war shop houses and colonial buildings. The State Mosque, with its distinctive dome and minarets in a pastel shade of sky blue and mint green stands regal in the middle of the town as a prominent landmark to newcomers.

Place of interests are aplenty in and on the outskirts of Kuantan. A visit to Kuantan is not complete without visiting some of these places, which never fail to arouse the curiosity of the visitors.

The Kuantan river cruise takes visitors through the picturesque landscape of a 500-year mangrove forest reserve that spreads along the Kuantan River. The swamp which covers an area of 340 hectares, is home to a fascinating varieties of estuarine plants, birds and fish species.


7


Greetings

Celebrating the 12th year of establishment as the sixteenth Public University in Malaysia, UMP offers a wide range of academic programmes in various engineering, science and technology, technology and management disciplines from diploma to postgraduate for local and international students.

This Undergraduate Prospectus provides you with useful information about UMP’s background, admission requirements, structure of our academic programmes, nine faculties and general information on the services and facilities available.

As a focused university, developing our niche namely chemical engineering, industrial biotechnology and automotive engineering is our main priority. At the same time, UMP also ventures into other engineering disciplines such as civil and environmental engineering, electrical and electronics engineering and software engineering.

We look forward in welcoming you as a new member of our UMPian community. Join us and you will not only find that the educational experience is enjoyable and rewarding, you will also be exposed to the best in engineering, science and technology education!

Warmest regards,

PROFESSOR DATO’ DR DAING NASIR IBRAHIMVICE CHANCELLOR

FOREWORD FROM THE VICE CHANCELLOR


8


VISION & MISSION

To be a world‐class Technological University.

MISSION

We provide high quality education, research and services in engineering and technology in a culture of creativity and innovation.

OBJECTIVES

1. To produce outstanding graduates by providing competitive engineering and technological programmes.

2. To spearhead cutting edge industry‐relevant research initiatives.

3. To be a leading service provider to industries and community based on our niche and areas of expertise.

4. To be recognized as an institution for excellent management and work culture.

PHILOSOPHY

Knowledge, a trust bestowed by Allah to man vicegerent on earth, is to be fully utilized. Emphasis is an applied knowledge guided by Islamic values to develop human capital towards universal harmony and prosperity.

CORE VALUES

1. Strong bond with the creator 2. Steadfast in upholding shared principles. 3. Creative in making wise decisions. 4. Resolute in facing challenges.


9


RESEARCH AND DEVELOPMENT

UMP’s research are centred around specific Niche Areas which are

• Chemical Engineering and Industrial Biotechnology

• Automotive Engineering and Manufacturing

The university focuses on applied research and industrial projects to boost the teaching and learning process with four focus groups and six expert groups:

INTERNATIONAL RECOGNITION AND ACHIEVEMENTS

The University has established links with reputable institutions of higher learning in Germany, United States, Indonesia and more on academic collaboration, student as well as staff exchange, and research. Exhibition of research products by renowned researchers of the University is among the university‘s main agenda. UMP has received various awards from the International Invention, Innovation, Industrial Design and Technology Exhibition (ITEX), the International Exhibition Ideas‐ Inventions New Products (IENA 07) in Germany, the Malaysian Invention and Design Society (MINDS) and many more.

Focus Group

• Chemical Engineering • Biotechnology • Automotive• Manufacturing

Expert Groups

• Process Instrumentation and Control • Innovative Construction • Information Technology• Human Sciences • Environmental • Advanced Material


10


UMP Campus in Gambang, Kuantan, Pahang

UMP now operates at two separate campuses, one in Gambang of about 30 km away from the state capital Kuantan and another in the designated royal residential toen of Pekan. Collectively, the University encompasses a land area of 65,000 square meters, accommodating 5,000 students.

The University is only 2.5 hours away from Kuala Lumpur, via the East Coast Expressway. Being strategically located in the East Coast Industrial Belt of Peninsular Malaysia- which hosts a number of multinational corporations (MNCs) in the chemical, petro-chemical, manufacturing, automotive and biotechnology industries. UMP students get extensive exposure to the latest development in the fields of engineering and technology.

WELCOME TO UMPUniversiti Malaysia Pahang (UMP) offers a wide range of practical-based higher education programmes in engineering and technology to produce competent engineers.

The application-oriented curriculum which integrates theory and practice in the concept of a teaching factory emphasizes experiential and action learning that is task-oriented and concentrated on problem-solving.

UMP focuses on applied research and industrial projects to enrich the teaching and learning processes while promoting the commercialization of the research products, thus exposing our students to the latest research and development activities in the industries.

Our campus is fully-equipped with the latest ICT systems, including a wireless broadband internet connection to facilitate the university’s electronic-based e-Learning and e-Management activities. UMP is committed to the development of human capital and technology to fulfill the needs of industries and contribute to national development.

UMP Campus in Pekan, Pahang

UMP’s main campus of 642 acres in Pekan Began Its Operation In July 2009. At present, the campus harbours three engineering faculties, namely the Mechanical, Electrical & Electronics and Manufacturing Engineering Faculties. When construction is fully completed, the Pekan campus can accommodate up to a total of 10,000 students and 2,000 staff.


11


ACADEMIC FACILITIES AND RESOURCES

LIBRARY

UMP has two libraries, one at each campus. The library of UMP plays an important role in its service for resources in teaching and learning, research and consultancy. It is also a catalyst in promoting culture of knowledge sharing at UMP and the community enriching various knowledge repository.

The library in Pekan campus started its services since March 2010. UMP libraries have a vast collection of books and multimedia for circulation and reference. UMP also subscribes to various repository databases. Physical facilities include discussion rooms, seminar rooms, multimedia rooms, computer laboratories and audio visual rooms.

The e-Resources of UMP library provide comprehensive access to full-text e-jounals available at the library. The portal allows you to search for online databases, e-jounals, e-books by title or browse title by subject.

STUDENT SUPPORT SERVICES

UMP in Gambang has been specially refurbished to provide an excellent study and learning environment. The university provides a wide variety of campus facilities for its academic staff and students. UMP has set up facilities to ensure that students enjoy the convenience of travel and accommodation when undertaking a programme at the university.

UMP is equipped with wireless internet accesses, which allow students and staff to access the internet from their laptops. Wireless internet access points have been installed at strategic locations on campus to facilitate internet access. UMP students, with notebooks, thus have the advantage of being able to access the internet anywhere, anytime on campus that is within range of the wireless internet access points. This flexibility allows them to access and download material from the web directly to their notebooks at their conveniences.

The Students Affairs & Alumni Department (SAFFAD) administers all matters relating to student welfare on campus. There are numerous student clubs and societies to meet the varied interests and recreational needs of the students.


12


INTERNATIONAL OFFICE

The international Office (IO) serves as a ‘one stop centre’ for all internationalization activities of the university. IO is committed to provide high quality services to its internal and external clients. The IO will also strive to promote and enrich the academic and cultural experience at UMP by facilitating the exchange of people and ideas.

ACCOMMODATION

UMP provides ample accommodation for undergraduate and graduate students in five residential colleges. Available allocation is for 70% students only. Room types available are single, twin sharing and quad sharing. Bus services are provided to students who are living at nearby housing estates for commuting to the campuses. An inter-campus bus services is also provided every 15 minutes in the morning and another series in the evening.


13


FACILITIES

Sport facilities available in UMP campus are gymnasium, badminton court, squash court, table tennis, tennis court, basketball, soccer field, volleyball and takraw court. The sports complex building has the biggest capacity in Pahang with twelve badminton courts. UMP also has a jogging track with exercise equipment.

HEALTH SERVICES

UMP has a medical centre that gives outpatient services to the students and staff of UMP. It is situated strategically in the centre of the campus with easy access for all students.


14


FACULTIES AND PROGRAMMES

FACULTY PROGRAMMES DURATIONS SPM STPM MATRIC DIPLOMA / EQUIVALENT A-LEVEL NON

MALAYSIAN

Faculty Of Civil Engineering & Earth Resources

B.Eng (Hons.) Civil Engineering 4 Years √ √ √ √

Diploma In Civil Engineering

2 Years

9 Months√

Faculty Of Chemical & Natural Resources Engineering

B.Eng (Hons.) Chemical Engineering 4 Years √ √ √ √

Diploma In Chemical Engineering (Process Plant)

2 Years

9 Months√

Faculty Of Electrical & Electronics Engineering

B.Eng (Hons.) Electrical Engineering (Electronics)

4 Years

√ √ √ √

B.Eng (Hons.) Electrical Engineering (Power System)

4 Years

√ √ √ √

Diploma In Electrical Engineering (Industrial Electronics)

2 Years

9 Months√

Faculty Of Mechanical Engineering

B.Eng (Hons.) Mechanical Engineering 4 Years √ √ √ √

B.Eng (Hons.) Mechanical Engineering (Automotive)

4 Years

√ √ √

√

B.Eng (Hons.) Automotive Engineering - (Collaboration Programme With Hska, Germany)

4 1/2 Years

√ √

√ √

Diploma In Mechanical Engineering

2 Years

9 Months√

Faculty Of Computer Systems & Software Engineering

Bachelor Of Computer Science (Software Engineering) With Honours

4 Years

√ √ √

√

Bachelor Of Computer Science (Computer Systems & Networking) With Honours

4 Years

√ √ √

√

Bachelor Of Computer Science (Graphics & Multimedia Technology) With Honours

4 Years

√ √ √

√

Diploma In Computer Science

2 Years

9 Months√


15


FACULTIES AND PROGRAMMES

FACULTY PROGRAMMES DURATIONS SPM STPM MATRIC DIPLOMA / EQUIVALENT A-LEVEL NON

MALAYSIAN

Faculty Of Industrial Sciences & Technology

Bachelor Of Applied Science (Hons.) Industrial Chemistry

4 Years

√ √ √

√

Bachelor Of Applied Science (Hons.) Industrial Biotechnology

4 Years

√ √ √

√

Bachelor Of Applied Science (Hons.) Material Technology

4 Years

√ √ √

√

Faculty Of Manufacturing Engineering

B.Eng (Hons.) Manufacturing Engineering

4 Years

√ √ √

√

B.Eng (Hons.) Mechatronics Engineering

4 Years

√ √ √

√

B.Eng (Hons.) Mechatronics Engineering - (Collaboration Programme With Hska, Germany)

4 1/2 Years

√ √

√ √

Faculty Of Industrial Management

Bachelor Of Project Management With Hons.

4 Years

√ √ √

√

Bachelor Of Industrial Technology Management With Honours

4 Years

√ √ √

√

Bachelor Of Business Engineering With Hons.

4 Years

√ √ √ √

Faculty Of Engineering Technology

Bachelor Of Occupational Safety And Health With Hons.

4 Years

√ √ √

√

Bachelor Of Engineering Technology (Infrastructure Management) With Hons.

4 Years

√ √ √

√

Bachelor Of Engineering Technology (Electrical) With Hons.

4 Years

√ √ √

√

Bachelor Of Engineering Technology (Manufacturing) With Hons.

4 Years

√ √ √

√

Bachelor Of Engineering Technology (Pharmaceutical) With Hons.

4 Years

√ √ √

√

Bachelor Of Engineering Technology (Energy & Environmental) With Hons.

4 Years

√ √ √

√


16


ACADEMIC CALENDAR

2015/2016 ACADEMIC SESSIONBACHELOR DEGREE PROGRAMME AND DIPLOMA (FULL TIME)

PRELIMINARY SHORT SEMESTER (NEW DIPLOMA STUDENTS)ACTIVITIES DURATION DATE

Registration of New Students (Diploma) 1 day 30 May 2015 (Saturday)

Lecture ( AA ) 8 weeks 1 June to 24 July 2015 Short Semester Break 4 weeks 1 August to 29 August 2015

NOTE:New Students Orientation Week Diploma Programme will be held on 30th to 31th May 2015.

SEMESTER I

ACTIVITIES DURATION DATERegistration of New Students (Degree) 1 day 30 August 2015

Lecture ( A ) 9 weeks 7 September to 6 November 2015

Semester I Mid Term Break ( B ) 1 week 7 November to 15 November 2015

Lecture 5 weeks 16 November to 18 December 2015Preparation Week ( C ) 1 week 19 December to 27 December 2015Semester I Final Examination 3 weeks 28 December 2015 to 15 January 2016

Semester I Break ( D ) 4 weeks 16 January to 14 February 2016

NOTE:Student Induction Week (MINDS) will be held on the first week of September (before the lecture begins)In conjuction with the Eidul Adha holiday on 24 September 2015 (Thursday), Faculties and Centre for Modern Languages & Human Sciences should have a one (1) day lecture replacement for Semester I as follows:

Leave on 25 September 2015 - need to be replaced.

SEMESTER II

ACTIVITIES DURATION DATELecture 7 weeks 15 February to 1 April 2016Semester II Mid Term Break 1 week 2 April to 10 April 2016

Lecture 7 weeks 11 April to 27 May 2016Preparation Week 1 week 28 May to 5 June 2016Semester II Final Examination 3 weeks 6 June to 24 Jun 2016

Semester II Break 10 weeks 25 June to 4 September 2016


17


SHORT SEMESTER

ACTIVITIES DURATION DATE

Short Semester Registration 2 days 23 to 24 June 2016

Lecture ( E ) 8 weeks 27 June to 19 August 2016Short Semester Examination 1 weeks 22 August to 26 August 2016

Break 1 weeks 27 August to 4 September 2016

2015/2016 PUBLIC HOLIDAY FOR FEDERAL AND STATE OF PAHANG

AA Eidul Fitri 1436 H 17 & 18 July 2015 (Friday & Saturday)

- National Day 31 August 2015 (Monday)

- Malaysia Day 16 September 2015 (Wednesday)

A Eidul Adha 1436 H 24 September 2015 (Thursday)

- Awal Muharam 1437 H 25 October 2015 (Saturday)w

- Birthday of KDYMM Sultan Pahang 24 October 2014 (Saturday)

B Deepavali 10 November 2015 (Tuesday)

- Birthday of Prophet Muhammad S.A.W. 24 December 2015 (Thursday)

C Christmas 25 December 2015 (Friday)

D Chinese New Year 8 February & 9 February 2016 (Monday & Tuesday)

- Labour Day 1 May 2016 (Sunday)

- Hol Day of Pahang 7 May 2016 (Saturday)

- Nuzul Al-Quran 1436 H 23 June 2016 (Thursday)

E Eidul Fitri 1436 H 7 & 8 July 2016 (Thursday & Friday)

This academic calendar is subject to to changes (if any) which will be notified by the university from time to time.


18


UNDERGRADUATE PROGRAMMES

BACHELOR’S PROGRAMMES

• B.Eng (Hons.) Chemical Engineering• B.Eng (Hons.) Civil Engineering• Bachelor of Computer Science (Software Engineering) with Hons.• Bachelor of Computer Science (Computer Systems & Networking) with Honours• Bachelor of Computer Science (Graphics & Multimedia Technology) with Honours• B.Eng (Hons.) Electrical Engineering (Electronics)• B.Eng (Hons.) Electrical Engineering (Power System)• Bachelor of Applied Science (Hons) Industrial Chemistry• Bachelor of Applied Science (Hons) Industrial Biotechnology• Bachelor of Applied Science (Hons) Material Technology• B.Eng (Hons.) Manufacturing Engineering• B.Eng (Hons.) Mechatronics Engineering• B.Eng (Hons.) Mechatronics Engineering - (Collaboration Programme With HsKA, Germany)• B.Eng (Hons.) Mechanical Engineering• B.Eng (Hons.) Mechanical Engineering (Automotive)• B.Eng (Hons.) Auitomotive Engineering - (Collaboration Programme With HsKA, Germany)• Bachelor of Occupational Safety and Health with Hons.• Bachelor of Industrial Technology Management with Hons.• Bachelor of Project Management with Hons.• Bachelor of Business Engineering with Hons.• Bachelor of Engineering Technology (Electrical) with Hons.• Bachelor of Engineering Technology (Energy & Environmental) with Hons.• Bachelor of Engineering Technology (Manufacturing) with Hons.• Bachelor of Engineering Technology (Infrastructure Management) with Hons.• Bachelor of Engineering Technology (Pharmaceutical) with Hons.

DPLOMA PROGRAMMES

• Diploma in Civil Engineering• Diploma in Computer Science• Diploma in Electrical Engineering (Industrial Electronics)• Diploma in Mechanical Engineering• Diploma in Chemical Engineeering (Process Plant)


FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERING


20



INTRODUCTION

The Faculty of Electrical & Electronic Engineering was first established on 16th February, 2002 with the aim of producing high-skilled engineers and technical assistants in the field of electrical and electronic engineering. The faculty delivers high quality teaching in diploma and degree, which combine technological and engineering aspects, targeting both theory and practical skills. The programs offered by the faculty focus on two areas that are electronics and power systems. Besides producing professional and semi-professional engineers in electrical and electronic engineering, the faculty aims at being a leading service provider in its field related to the petrochemical and manufacturing industries.

The faculty’s research activities are organized broadly into groups of expertise, in the fields of computer vision, intelligent system, signal processing, applied electronics, robotics, control & instrumentation, optimization, power system and renewable energy. Each group collaborates widely with partner in industrial and research institutions, funded by a wide range of sources. The objective of the research activities is to become the center of reference for industries in electrical and electronic solutions especially in the east coast region of Peninsular Malaysia.

PROGRAMMES OFFERED

Bachelor of Electrical Engineering (Electronics) - BEEBachelor of Electrical Engineering (Power System) - BEPBachelor of Electrical Engineering (Part-time) (Electronics) - BEEDiploma in Electrical Engineering (Industrial Electronics) - DEE

CAREER OPPORTUNITIES

The demand for professionals in the fields of electrical and electronics is increasing by the year. Graduates will have the opportunity to work in the fields of industrial power systems, consumer and industrial electronics, manufacturing, and education.


21


FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERING CURRICULUM STRUCTURE

BACHELOR OF ELECTRICAL ENGINEERING (ELECTRONICS)

YEAR FIRST SECOND THIRD FOURTH

SEMESTER FIRST SECOND FIRST SECOND FIRST SECOND THIRD FIRST SECOND

CO

UR

SES

BEE1133 CIRCUIT

ANALYSIS I

BEE1143 CIRCUIT ANALYSIS

II

BEE1313 INSTRUMENTATION & MEASUREMENTS

BEE2233 ANALOG

ELECTRONICS II

BEE2123 ELECTRICAL MACHINES

BEE3133 ELECTRICAL

POWER SYSTEMS

BEE3806 INDUSTRIAL

TRAINING (HW)

BEE4323 EMBEDDED

CONTROLLER TECHNOLOGY

BEE4**3 (ELECTIVE 3)

BEE1971 LOW VOLTAGE

ELECTRICAL INSTALLATION

BEE1213 DIGITAL

ELECTRONICS

BEE2213 ANALOG

ELECTRONICS I

BEE3233 ELECTRONIC SYSTEM

DESIGN

BEE2223 MICROPROCESSOR

BEE3313 PRINCIPLES OF

CONTROL SYSTEMS

BEE4413

DIGITAL SIGNAL PROCESSING


BUF1113 BASIC PHYSICS

BEE1223 COMPUTER

PROGRAMMING & APPLICATION

BEE2143 SIGNALS & NETWORKS

BEE3941 MICROCONTROLLER

APPLICATION

BEE3113 ELECTROMAGNETIC

FIELDS THEORY

BEE4213 MULTIMEDIA

TECHNOLOGY & APPLICATIONS



BUM2133 ORDINARY

DIFFERENTIAL EQUATION

BUM2123 APPLIED CALCULUS

BEE2931 BASIC PLC

BEE1611 OCCUPATIONAL

SAFETY & HEALTH


COMMUNICATION SYSTEMS

BEE4641 ENGINEERS &

SOCIETY BEE4**3

(ELECTIVE 2)

BEE4724 ENGINEERING

PROJECT 2

UHL2412 ENGLISH FOR

ACADEMIC COMMUNICATION

UHL2422 ENGLISH FOR

TECHNICAL COMMUNICATION

BUM2313 NUMERICAL METHODS

BEE1111 PROJECT

MANAGEMENT

BEE4632 MAINTENANCE TECHNOLOGY

BEE3333 INTEGRATED

ENGINEERING DESIGN

BEE4712 ENGINEERING

PROJECT 1

UHR1012 ISLAMIC AND

ASIAN CIVILIZATIONS

UHF11*1 FOREIGN

LANGUAGE LEVEL 1

UHL2432 ENGLISH FOR

PROFESSIONAL COMM.

BUM2413 APPLIED STATISTICS

UHS2021 SOFT SKILLS 2

UHM2022 ETHNIC

RELATIONS

UGE2002 TECHNO

PRENEURSHIP

UQB1**1 CO-CURRICULUM

1

UQ*2**1 CO-CURRICULUM 2

UHF21*1 FOREIGN

LANGUAGE LEVEL 2


TOTAL CREDIT 15 16 16 13 15 15 6 16 13

TOTAL CREDIT FOR

GRADUATION 125


22


ELECTIVE COURSES FOR BACHELOR OF ELECTRICAL ENGINEERING (ELECTRONICS)

NO. CODE COURSE CREDIT HOUR

1 BEE4223 POWER ELECTRONICS & DRIVES SYSTEMS 3

2 BEE4233 DATA COMMUNICATIONS 3

3 BEE4253 COMPUTER VISION SYSTEMS 3

4 BEE4333 INTELLIGENT CONTROL 3

5 BEE4343 PROCESS CONTROL 3

6 BEE4363 DISTRIBUTED CONTROL SYSTEM 3

7 BEE4373 ROBOTICS 3

8 BEE4423 RF CIRCUIT DESIGN 3

9 BEE4433 ANTENNA & PROPAGATION 3

10 BEE4523 INDUSTRIAL INSTRUMENTATION 3

11 BEE4553 VLSI DESIGN & PROCESS 3

12 BEE4563 RAPID DIGITAL SYSTEM PROTOTYPING 3

TOTAL MINIMUM CREDITS OF ELECTIVE COURSES FOR GRADUATION 15


23


ELECTIVE COURSES FOR BACHELOR OF ELECTRICAL ENGINEERING (ELECTRONICS)


1 BEE4223 POWER ELECTRONICS & DRIVES SYSTEMS 3

2 BEE4233 DATA COMMUNICATIONS 3

3 BEE4253 COMPUTER VISION SYSTEMS 3

4 BEE4333 INTELLIGENT CONTROL 3


6 BEE4363 DISTRIBUTED CONTROL SYSTEM 3


8 BEE4423 RF CIRCUIT DESIGN 3

9 BEE4433 ANTENNA & PROPAGATION 3

10 BEE4523 INDUSTRIAL INSTRUMENTATION 3

11 BEE4553 VLSI DESIGN & PROCESS 3

12 BEE4563 RAPID DIGITAL SYSTEM PROTOTYPING 3



BACHELOR OF ELECTRICAL ENGINEERING (POWER SYSTEM)



CO

UR

SES

BEE1133 CIRCUIT ANALYSIS I

BEE1143 CIRCUIT ANALYSIS

II

BEE1313 INSTRUMENTATION & MEASUREMENTS

BEE2233 ANALOG

ELECTRONICS II

BEE3143 POWER SYSTEMS

ANALYSIS

BEE3133 ELECTRICAL

POWER SYSTEMS

BEE3806 INDUSTRIAL

TRAINING (HW)

BEE4143 POWER SYSTEM

PROTECTION & HIGH

VOLTAGE


BEE1971 LOW VOLTAGE


BEE1213 DIGITAL

ELECTRONICS

BEE2213 ANALOG

ELECTRONICS I

BEE2123 ELECTRICAL MACHINES

BEE3113 ELECTROMAGNETIC

FIELDS THEORY


CONTROL SYSTEMS

BEE4173 POWER SYSTEM

OPERATION & CONTROL


BUF1133 BASIC PHYSICS

BEE1223 COMPUTER

PROGRAMMING & APPLICATION

BEE2143 SIGNALS & NETWORKS

BEE2931 BASIC PLC



BEE4223 POWER

ELECTRONICS & DRIVES SYSTEMS



BUM2133 ORDINARY



BEE1961 MOTOR CONTROL

BEE1611 OCCUPATIONAL

SAFETY & HEALTH

BEE4632 MAINTENANCE TECHNOLOGY

BEE4641 ENGINEERS & SOCIETY


BEE4724 ENGINEERING

PROJECT 2

UHL2412 ENGLISH FOR


UHL2422 ENGLISH FOR



BEE1111 PROJECT

MANAGEMENT

BEE2223 MICROPROCESSOR

BEE3333 INTEGRATED

ENGINEERING DESIGN

BEE4712 ENGINEERING PROJECT 1

UHR1012 ISLAMIC AND ASIAN

CIVILIZATIONS

UHF11*1 FOREIGN

LANGUAGE LEVEL 1

UHL2432 ENGLISH FOR

PROFESSIONAL COMM.

BUM2413 APPLIED

STATISTICS


UGE2002 TECHNOPRE

NEURSHIP

UQB1**1 CO-CURRICULUM 1


UHF21*1 FOREIGN

LANGUAGE LEVEL 2


UHM2022 ETHNIC RELATIONS

TOTAL CREDIT 15 16 16 13 17 13 6 16 13

TOTAL CREDIT FOR

GRADUATION 125


24


ELECTIVE COURSES FOR BACHELOR OF ELECTRICAL ENGINEERING (POWER SYSTEM) (HONOURS)


1 BEE4113 ELECTRICAL INSTALLATION DESIGN 3

2 BEE4153 POWER QUALITY 3

3 BEE4163 ALTERNATIVE ENERGY 3

4 BEE4273 HVDC & FACTS 3

5 BEE4323 EMBEDDED CONTROLLER TECHNOLOGY 3



8 BEE4413 DIGITAL SIGNAL PROCESSING 3



25


ELECTIVE COURSES FOR BACHELOR OF ELECTRICAL ENGINEERING (POWER SYSTEM) (HONOURS)


1 BEE4113 ELECTRICAL INSTALLATION DESIGN 3

2 BEE4153 POWER QUALITY 3

3 BEE4163 ALTERNATIVE ENERGY 3

4 BEE4273 HVDC & FACTS 3

5 BEE4323 EMBEDDED CONTROLLER TECHNOLOGY 3



8 BEE4413 DIGITAL SIGNAL PROCESSING 3



DIPLOMA IN ELECTRICAL ENGINEERING (INDUSTRIAL ELECTRONICS)

YEAR FIRST SECOND THIRD

SEMESTER PRELIMINARY (0) FIRST SECOND FIRST SECOND FIRST SECOND

CO

UR

SES

UHL1412 FOUNDATION ENGLISH

DEE1124 CIRCUITS ANALYSIS

I

DEE2124 CIRCUITS ANALYSIS II

DEE1233 ANALOG ELECTRONICS I

DEE3233 ANALOG

ELECTRONICS II

DEE3812 INDUSTRIAL

TRAINING (HW)

UQB1011 BRIGED SISWA

DEE2314 INSTRUMENTATION & MEASUREMENTS

DEE1224 DIGITAL ELECTRONICS

DEE3224 MICROPROCESSOR & MICROCONTROLLER

FUND

DEE3313 PRINCIPLES OF

CONTROL SYSTEMS

DUM1113 BASIC MATHEMATICS

DEE1941 TECHNICAL DRAWING

DEE1213 COMPUTER

PROGRAMMING

DEE3143 BASIC ELECTRICAL

MACHINES & POWER SYSTEMS

DEE3413 PRINCIPLES OF


DEE1971


DEE2931 BASIC

PROGRAMMABLE LOGIC CONTROLLER

DEE3323 INDUSTRIAL

AUTOMATIONS

DEE2612 BASIC MAINTENANCE

TECHNOLOGY

DUF1113 PHYSICS

DEE3941 MICROCONTROLLER

APPLICATION

DEE3931 ELECTROPNEUMATIC

DEE3713 MINI PROJECT

UHL1422 ENGLISH FOR


DUM1123 CALCULUS

DUM2113 TECHNICAL

MATHEMATICS

UHS2021 SOFT SKILLS II (HW)

UHS1021 SOFT SKILLS I (HW)

UHL1432 ENGLISH FOR

OCCUPATIONAL COMMUNICATION


UGE1002 ASAS KEBUDAYAAN

KEUSAHAWANAN


CIVILIZATIONS

TOTAL CREDIT 6 18 18 19 17 12

OVERALL TOTAL

CREDIT FOR GRADUATION

90


26


FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES


27



INTRODUCTION

The Faculty of Civil Engineering & Earth Resources (FKASA) was established in 2002 and had its first intake of student in July 2003. The field of Civil Engineering involves the assessment, planning, design, construction, operation and maintenance of physical infrastructures such as roads, buildings, water supply system, airports, port bridges and tunnels. All these infrastuctures are meant to improve the quality of human life. FKASA offers academic programs which are relevant to the need of the industry.

PROGRAMMES OFFERED

The faculty offers two (2) programmes of study for the session 2015/2016:

§ Bachelor of Engineering (Hons) Civil Engineering (BAA) § Diploma in Civil Engineering (DAA)


Graduates are able to find employment in both government and private sector as civil and structural engineer, project engineer and manager, water and geotechnical engineering consultant and others related fields.


28


FACULTY OF CIVIL ENGINEERING AND EARTH RESOURCES CURRICULUM STRUCTURE

BACHELOR OF ENGINEERING (HONS) CIVIL ENGINEERING


SEMESTER FIRST SECOND THIRD FIRST SECOND FIRST SECOND THIRD FIRST SECOND

CO

UR

SES

BAA 1112 ENGINEERING

DRAWING


SURVEYING FIELDWORK


SURVEYING CAMP

BAA 2713 FLUID MECHANICS


LABORATORY III

BAA 3012 LAW OF

CONTRACT & ESTIMATION

BAA 3213 REINFORCED CONCRETE DESIGN II

BAA 4976 INDUSTRIAL

TRAINING

BAA 4023 PROJECT FOR

PROFESSIONAL PRACTICES

BAA 4**3 ELECTIVE I

BAA 1322 CONSTRUCTION ENGINEERING

BAA 1931 ENGINEERING LABORATORY I

BAA 2113 THEORY OF

STRUCTURES

BAA 2513 SOIL

MECHANICS & GEOLOGY


LABORATORY IV

BAA 3312 BUILDING

SERVICES & MAINTENANCE

BAA 4513

FOUNDATION ENGINEERING

BAA 4**3 ELECTIVE

II

BAA 1113 ENGINEERING MECHANICS

BAA 1133 MECHANICS OF

MATERIALS


LABORATORY II

BAA 2723 HYDRAULICS

BAA 2213 REINFORCED CONCRETE

DESIGN I

BAA 3513 GEOTEHCNICAL ENGINEERING

BAA 3922 RESEARCH

METHODOLOGY & PRE-PROJECT

BAA 4**3 ELECTIVE

III

BAA 1312 CIVIL ENGINEERING

MATERIALS


SURVEYING

BUM 2313 NUMERICAL METHODS

BAA 2012 COMPUTER

PROGRAMMING

BAA 3713 HYDROLOGY &

WATER RESOURCES

BAA 3023 PROJECT

MANAGEMENT IN

CONSTRUCTION

BAA 4222

ENGINEERS IN SOCIETY

BAA 4914 FINAL YEAR

PROJECT

UHL 2400 FUNDAMENTAL OF

ENGLISH LANGUAGE

UHM 2022 ETHNIC RELATIONS

UQ* 2**1 CO-CURRICULUM II

BAA 2123 STRUCTURAL

ANALYSIS

BAA 2413 HIGHWAY &

TRAFFIC ENGINEERING

UHS 2021 SOFT SKILLS II

BAA 3322 ENGINEERING ECONOMICS

UGE 2002 TECHNO

PRENUERSHIP

BUM 2123 APPLIED CALCULUS

BUM 2133 ORDINARY

DIFFERENTIAL EQUATIONS

UHL 2432 ENGLISH FOR

PROFESSIONAL COMMUNICATION

UHE 3**2 ELECTIVE COURSES

BUM 2413 APPLIED

STATISTICS

UHF 21*1 FOREIGN

LANGUAGES LEVEL II

BAA 3223

STEEL & TIMBER DESIGN





UHS 1021 SOFT SKILLS I

UHR 1012 ISLAMIC AND ASIAN

CIVILISATIONS 1

UHF 11*1 FOREIGN

LANGUAGES LEVEL I

UQB 1**1 CO-CURRICULUM 1

TOTAL CREDIT 17 16 1 13 16 15 16 6 15 15

TOTAL CREDIT FOR

GRADUATION

130 (MATRICULATION –SCIENCE PHYSICS/ STPM/ DIPLOMA) 133 (MATRICULATION-LIFE SCIENCE)


29


ELECTIVE COURSES FOR BACHELOR OF ENGINEERING (HONS) CIVIL ENGINEERING


1 BAA 4313 GEOGRAPHICAL INFORMATION SYSTEM 3

2 BAA 4823 FACILITIES AND ASSET MANAGEMENT 3

3 BAA 4723 APPLIED HYDRAULICS ENGINEERING 3

4 BAA 4483 ADVANCED WATER AND WASTEWATER 3

5 BAA 4233 FINITE ELEMENT METHOD 3

6 BAA 4253 BRIDGE ENGINEERING 3

7 BAA 4263 SOLID WASTE MANAGEMENT 3

8 BAA 4413 TRANSPORTATION ENGINEERING 3

9 BAA 4323 BUILDING INFORMATION MODELLING 3

10 BAA 4523 SOIL IMPROVEMENT 3

11 BAA 4833 BUSINESS FOR ENGINEERING 3

12 BAE 4443 WASTE MANAGEMENT 3

13 BAE 4683 HAZARDOUS WASTE MANAGEMENT 3

14 BAE 4613 ENVIRONMENTAL MANAGEMENT 3

15 BAE 4813 ADVANCED HYDROLOGY & WATER RESOURCES 3

16 BAA 4243 ADVANCED CONCRETE MATERIALS 3



30



DIPLOMA IN CIVIL ENGINEERING


SEMESTER SHORT SEMESTER FIRST SECOND FIRST SECOND FIRST SECOND

CO

UR

SES

UHL 1412 FOUNDATION

ENGLISH


ACADEMIC SKILLS





DAA 3909 INDUSTRIAL

TRAINING

UQB 1011 BRIGED SISWA

DUM 1123 CALCULUS


CIVILISATIONS I

DAA 1951 ENGINEERING LABORATORY I

UGE 1002 ASAS

PEMBUDAYAAN KEUSAHAWANAN

DAA 3903 INDUSTRIAL

TRAINING REPORT

DUM 1113 BASIC

MATHEMATICS

DUF 1113 PHYSICS


DAA 2313 ENGINEERING

SURVEYING


LABORATORY III

DUK 1113 GENERAL

CHEMISTRY I

DUM 2113 TECHNICAL

MATHEMATICS


SURVEYING FIELDWORK

DAA 2023 PROJECT

MANAGEMENT

DAA 1032

ENGINEERING DRAWING


LABORATORY II

DAA 2123 THEORY OF

STRUCTURES

DAA 2213 STRUCTURAL

DESIGN I

DAA 1312

ENGINEERING MATERIALS

DAA 1212 COMPUTER

PROGRAMMING

DAA 2513 SOIL MECHANICS

AND GEOLOGY

DAA 2222 STRUCTURAL

DESIGN II

DAA 1113

ENGINEERING MECHANICS

DAA 1123 MECHANICS OF

MATERIALS

DAA 2612 ENVIRONMENTAL

ENGINEERING

DAA 2523 GEOTECHNICAL ENGINEERING

DAA 1723

FLUID MECHANICS

DAA 2723 HYDRAULICS & HYDROLOGY

DAA 2413 TRAFFIC & HIGHWAY

ENGINEERING

TOTAL CREDIT 6 18 18 18 18 12

OVERALL TOTAL CREDIT FOR GRADUATION 90


31



DIPLOMA IN CIVIL ENGINEERING


SEMESTER SHORT SEMESTER FIRST SECOND FIRST SECOND FIRST SECOND

CO

UR

SES

UHL 1412 FOUNDATION

ENGLISH


ACADEMIC SKILLS





DAA 3909 INDUSTRIAL

TRAINING

UQB 1011 BRIGED SISWA

DUM 1123 CALCULUS


CIVILISATIONS I

DAA 1951 ENGINEERING LABORATORY I

UGE 1002 ASAS


DAA 3903 INDUSTRIAL

TRAINING REPORT

DUM 1113 BASIC

MATHEMATICS

DUF 1113 PHYSICS



SURVEYING


LABORATORY III

DUK 1113 GENERAL

CHEMISTRY I

DUM 2113 TECHNICAL

MATHEMATICS


SURVEYING FIELDWORK

DAA 2023 PROJECT

MANAGEMENT

DAA 1032

ENGINEERING DRAWING


LABORATORY II

DAA 2123 THEORY OF

STRUCTURES

DAA 2213 STRUCTURAL

DESIGN I

DAA 1312


DAA 1212 COMPUTER

PROGRAMMING

DAA 2513 SOIL MECHANICS

AND GEOLOGY

DAA 2222 STRUCTURAL

DESIGN II

DAA 1113

ENGINEERING MECHANICS

DAA 1123 MECHANICS OF

MATERIALS

DAA 2612 ENVIRONMENTAL

ENGINEERING

DAA 2523 GEOTECHNICAL ENGINEERING

DAA 1723

FLUID MECHANICS

DAA 2723 HYDRAULICS & HYDROLOGY

DAA 2413 TRAFFIC & HIGHWAY

ENGINEERING

TOTAL CREDIT 6 18 18 18 18 12

OVERALL TOTAL CREDIT FOR GRADUATION 90

FACULTY OF MANUFACTURING ENGINEERING


32



INTRODUCTION

The Faculty of Manufacturing Engineering was established in 2008 with the target to produce competent professionals for the manufacturing industry. Being an industry-driven faculty, the faculty offers several academic programs which are significant in preparing students with essential engineers attributes such as solid scientific foundation, psychomotor skills, critical thinking skills, communication skills, and entrepreneurship.

PROGRAMMES OFFERED

At the undergraduate level, the Faculty of Manufacturing Engineering offers degree programmes as follows:

a) Bachelor of Engineering (Hons.) Manufacturing Engineeringb) Bachelor of Engineering (Hons.) Mechatronics Engineeringc) Bachelor of Engineering (Hons.) Mechatronics Engineering - (Collaboration Programme

with HsKA Germany)


Ø Project Engineer Ø Design Engineer Ø Operation Engineer Ø Mechatronic Engineer Ø Manufacturing EngineerØ Robotic Engineer Ø Research & Development Engineer Ø Energy EngineerØ Process Plant Engineer Ø Sales EngineerØ QA Engineer Ø Production EngineerØ Material Engineer Ø ConsultantØ Instrumentation & Control EngineerØ CAD/CAM Engineer Ø Technopreneur Ø Lecturer


33


FACULTY OF MANUFACTURING ENGINEERING CURRICULUM STRUCTURE

BACHELOR OF MANUFACTURING ENGINEERING


B

FF39

06 IN

DU

STR

IAL

TRA

ININ

G (L

I) 12

WEE

KS

FOURTH

SEMESTER FIRST & SECOND FIRST & SECOND FIRST & SECOND FIRST & SECOND

M

AN

UFA

CTU

RIN

G E

NG

INEE

RIN

G C

OR

E C

OU

RSE

S

BFF1801 MACHINING 1

BFF2612 COMPUTER AIDED

ENGINEERING DESIGN

BFF3302 SENSOR AND

INSTRUMENTATION SYSTEMS

BFF4103 CONTROL SYSTEM

ENGINEERING

BFF1113 ENGINEERING

MATERIALS

BFF1123 DYNAMICS

BFF3103 VIBRATIONS

BFF4902 FINAL YEAR PROJECT 1

BFF1811 MACHINING 2

BFF2801 ELECTRICAL/ELECTRONICS

LAB

BFF3622 COMPUTER AIDED MANUFACTURING

BFF4**3A MANUFACTURING

ELECTIVE 3

BFF2003 COMPUTER

PROGRAMMING

BFF1133 MECHANICS OF MATERIALS

BFF3242 HEAT TRANSFER

BFF3123 MACHINE DESIGN

BFF1102 STATICS

BFF2423 MANUFACTURING

PROCESSES

BFF3**3A MANUFACTURING ELECTIVE

1

BFF4911 ENVIRONMENT SAFETY &

HEALTH

BFF1602 TECHNICAL DRAWING

BFF2233 THERMODYNAMICS

BFF2821 MECHANICS LAB

BFF4914 FINAL YEAR PROJECT 2

BFF1502 PROJECT MANAGEMENT

BFF2223 FLUID MECHANICS

BFF1922 ENGINEERING ECONOMY

BFF3523 PRODUCTION PLANNING

AND CONTROL

BFF1303 ELECTRICAL/

ELECTRONICS ENGINEERING

BFF1921 ENGINEERS IN SOCIETY

BFF3632 DESIGN OF JIGS & FIXTURES

BFF4**3B MANUFACTURING

ELECTIVE 4

BFF2523

QUALITY ENGINEERING

BFF3**3B MANUFACTURING ELECTIVE

2


PROCESS PLANNING

BFF2513 MANUFACTURING SYSTEM

BFF3801 THERMAL-FLUID

ENGINEERING LAB

BFF2433 ADVANCED

MANUFACTURING PROCESSES

BFF3503 PRODUCTION ENGINEERING

100 17 24 27 6 25

29

UNIVERSITY REQUIRED COURSES : APPLIED CALCULUS, APPLIED STATISTICS, ORDINARY DIFFERENTIAL EQUATIONS, ENGLISH FOR ACADEMIC COMMUNICATION, ENGLISH FOR TECHNICAL COMMUNICATION, FUNDAMENTAL OF ENGLISH LANGUAGE, ENGLISH FOR PROFESSIONAL COMMUNICATION,ISLAMIC AND ASIAN CIVILISATIONS 1, ETHNIC RELATIONS, FOREIGN LANGUAGES LEVEL 1, FOREIGN LANGUAGES LEVEL 2, SOFT SKILLS 1, SOFT SKILL 2, CO-CURRICULUM I, CO-CURRICULUM II, TECHNOPRENEURSHIP,ELECTIVE COURSES.

129 TOTAL UNIT FOR GRADUATION

# ELECTIVE SUBJECTS : ADVANCED MACHINING, PLASTICS PRODUCT DESIGN, SHEET METAL PRODUCT DESIGN, LEAN PRODUCTION SYSTEM, FACTORY MANAGEMENT, DIE 1, MOLD 1,MOLD 2 , DIE 2,LEAN PRODUCTION SYSTEM 2, TOTAL QUALITY MANAGEMENT, MECHANIZATION APPROACH TO PROCESS IMPROVEMENT, PROCESS AUDITING TECHNIQUES, PRODUCTION LINE MANAGEMENT, SIX SIGMA


34


ELECTIVE COURSES FOR BACHELOR OF MANUFACTURING ENGINEERING


1 BFF3403 ADVANCE MACHINING 3

2 BFF3553 MECHANIZATION APPROACH TO PROCESS IMPROVEMENT 3

3 BFF4503 FACTORY MANAGEMENT 3

4 BFF3603 PLASTIC PRODUCT DESIGN 3

5 BFF3613 SHEET METAL PRODUCT 3

6 BFF3563 PROCESS AUDITING TECHNIQUES 3

7 BFF4513 LEAN PRODUCTION SYSTEM 3

8 BFF4603 MOLD 1 3

9 BFF4613 DIE 1 3

10 BFF4563 PRODUCTION LINE MANAGEMENT 3

11 BFF4543 LEAN PRODUCTION SYSTEM 2 3

12 BFF4623 MOLD 2 3

13 BFF4633 DIE 2 3

14 BFF4573 SIX SIGMA 3

15 BFF4553 TOTAL QUALITY MANAGEMENT 3



35


ELECTIVE COURSES FOR BACHELOR OF MANUFACTURING ENGINEERING


1 BFF3403 ADVANCE MACHINING 3

2 BFF3553 MECHANIZATION APPROACH TO PROCESS IMPROVEMENT 3

3 BFF4503 FACTORY MANAGEMENT 3

4 BFF3603 PLASTIC PRODUCT DESIGN 3

5 BFF3613 SHEET METAL PRODUCT 3

6 BFF3563 PROCESS AUDITING TECHNIQUES 3

7 BFF4513 LEAN PRODUCTION SYSTEM 3

8 BFF4603 MOLD 1 3

9 BFF4613 DIE 1 3

10 BFF4563 PRODUCTION LINE MANAGEMENT 3

11 BFF4543 LEAN PRODUCTION SYSTEM 2 3

12 BFF4623 MOLD 2 3

13 BFF4633 DIE 2 3

14 BFF4573 SIX SIGMA 3

15 BFF4553 TOTAL QUALITY MANAGEMENT 3



BACHELOR OF MECHATRONICS ENGINEERING


B

FF39

06 IN

DU

STR

IAL

TRA

ININ

G (L

I) 12

WEE

KS

FOURTH

SEMESTER FIRST & SECOND FIRST & SECOND FIRST & SECOND FIRST & SECOND

M

AN

UFA

CTU

RIN

G E

NG

INEE

RIN

G C

OR

E C

OU

RSE

S

BFF1801 MACHINING 1

BFF2612 COMPUTER AIDED

ENGINEERING DESIGN

BFF3302 SENSOR AND


BFF4103 CONTROL SYSTEM ENGINEERING

BFF1113 ENGINEERING

MATERIALS

BFF1123 DYNAMICS

BFF3103 VIBRATIONS

BFM4902 FINAL YEAR PROJECT 1

BFF1811 MACHINING 2

BFF3622 COMPUTER AIDED MANUFACTURING

BFM3333 MICROCONTROLLER

SYSTEM

BFM3**3A MECHATRONICS ELECTIVE 1

BFF2003 COMPUTER

PROGRAMMING

BFF1133 MECHANICS OF

MATERIALS

BFF3242 HEAT TRANSFER

BFF3123 MACHINE DESIGN

BFF1102 STATICS


PROCESSES 1

BFF3801 THERMAL FLUID

ENGINEERING LAB

BFM4733 MECHATRONICS SYSTEM

DESIGN

BFF1602 TECHNICAL DRAWING

BFF1921 ENGINEERS IN SOCIETY

BFF2821 MECHANICS LAB

BFM4914 FINAL YEAR PROJECT 2

BFF1502 PROJECT MANAGEMENT

BFF2233 THERMODYNAMICS

BFM2013 PROGRAMMING FOR

ENGINEERS

BFM3**3B MECHATRONICS ELECTIVE 2

BFM1313 FUNDAMENTAL OF

ELECTRICAL ENGINEERING

BFF2223 FLUID MECHANICS

BFF1922 ENGINEERING ECONOMY

BFM4503 ROBOTICS FOR ENGINEERS

BFM2303 ANALOG ELECTRONICS

BFM3002 COMPUTER SIMULATION

BFF4911 ENVIRONMENT SAFETY &

HEALTH

BFM2313 DIGITAL ELECTRONICS

BFM3403 FLUID DRIVE SYSTEM

BFM2831 FUNDAMENTAL OF

ELECTRICAL ENGINEERING LAB

BFM3303 ELECTRICAL DRIVE SYSTEM

100

15 25 27 6 25

29

UNIVERSITY REQUIRED COURSES : APPLIED CALCULUS, APPLIED STATISTICS, ORDINARY DIFFERENTIAL EQUATIONS, FUNDAMENTALS OF ENGLISH LANGUAGE, ENGLISH FOR TECHNICAL COMMUNICATION, ENGLISH FOR ACADEMIC COMMUNICATION, ENGLISH FOR PROFESSIONAL COMMUNICATION, ISLAMIC AND ASIAN CIVILISATIONS 1, ETHNIC RELATIONS, FOREIGN LANGUAGES LEVEL 1, FOREIGN LANGUAGES LEVEL 2, SOFT SKILLS 1, SOFT SKILL 2, CO-CURRICULUM I, CO-CURRICULUM II, TECHNOPRENEURSHIP, ELECTIVE COURSES.


# ELECTIVE SUBJECTS: POWER ELECTRONICS, ELECTRICAL POWER AND MACHINES, ARTIFICIAL INTELLIGENCE SYSTEM, ROBOTIC FOR ENGINEERS.


36


ELECTIVE COURSES FOR BACHELOR OF MECHATRONICS ENGINEERING


1 BFM3323 POWER ELECTRONICS 3

2 BFM3313 ELECTRICAL POWER AND MACHINES 3

3 BFM3003 ARTIFICIAL INTELLIGENCE SYSTEM 3



37


ELECTIVE COURSES FOR BACHELOR OF MECHATRONICS ENGINEERING


1 BFM3323 POWER ELECTRONICS 3

2 BFM3313 ELECTRICAL POWER AND MACHINES 3

3 BFM3003 ARTIFICIAL INTELLIGENCE SYSTEM 3



BACHELOR OF MECHATRONICS ENGINEERING (COLLABORATION PROGRAMME WITH HSKA GERMANY)

YEAR FIRST SECOND THIRD FOURTH FOURTH

FIFTH

SEMESTER

FIRST & SECOND FIRST & SECOND FIRST & SECOND

INDUSTRIAL TRAINING (LI) 6

MONTHS

BHM3912 INTERNSHIP

BHM3931

INTERNSHIP FOLLOW-UP

SECOND

FIRST

M

AN

UFA

CTU

RIN

G E

NG

INEE

RIN

G C

OR

E C

OU

RSE

S

BHM1103 STATICS

BHM2323 ELECTRONICS

ENGINEERING 2

BHM3313 MICROCOMPUTER

TECHNOLOGY

BHM3712 HYBRID

INTEGRATION

BHM4003 INFORMATION

SYSTEM

BHM1113 ENGINEERING

MATERIALS

BHM2103 DYNAMICS

BHM4704 INDUSTRIAL

AUTOMATION

BHM3702 CLEAN ROOM TECHNOLOGY

BHM4942

PREPARATION FOR BACHELOR

THESIS

BHM1602 TECHNICAL DRAWING

BHM2203 THERMAL-FLUID ENGINEERING 1

BHM3722 SMD TECHNOLOGY

BHM3303 SENSOR AND


BHM4914 BACHELOR

THESIS

BHM1801 MACHINING 1

BHM2003 COMPUTER

PROGRAMMING

BHM3102 VIBRATIONS

BHM4402 ELECTRONICS IN MECHATRONICS

SYSTEMS

BHM4931 FINAL

EXAMINATION

BHM1313 ELECTRONICS

ENGINEERING 1

BHM2333 ELECTRONICS

ENGINEERING 3

BHM3623 PRODUCT

DEVELOPMENT AND DESIGN

BHM4904 TEAM ORIENTED PROJECT STUDY

BHM1123 MECHANICS OF

MATERIALS

BHM2342 MECHANICAL AND

ELECTRICAL COMPONENTS

BHM3012 NUMERICAL

PROGRAMMING

BHM4102 FINITE ELEMENT

ANALYSIS

BHM1612 CAD MODELING

BHM2213 THERMAL- FLUID ENGINEERING 2

BHM3941 ENGINEERING

COMMUNICATION

BHM1811 MACHINING 2

BHM2403 MANUFACTURING

PROCESSES 1

BHM4911 ENVIRONMENT

SAFETY AND HEALTH

BHM2013

PROGRAMMING FOR ENGINEERS

BHM4103 CONTROL SYSTEM

ENGINEERING

BHM3612

OPTOELECTRONICS

BHM3512

MANUFACTURING QUALITY

BHM3602 QUALITY INSPECTION

BHM3323

SOFTWARE ENGINEERING

BHM3922

INTERNSHIP PREPARATION

BHM4921

ENGINEERS AND SOCIETY

115

18 26 33 13 15

10

27 UNIVERSITY REQUIRED COURSES : APPLIED CALCULUS, APPLIED STATISTICS, ORDINARY DIFFERENTIAL EQUATIONS, ISLAMIC AND ASIAN CIVILISATIONS 1, ETHNIC RELATIONS, DEUTSCH SPRACHE 1, DEUTSCH SPRACHE 2, DEUTSCH SPRACHE 3, DEUTSCH SPRACHE 4, SOFT SKILLS 1, SOFT SKILL 2, CO-CURRICULUM I, CO-CURRICULUM II, TECHNOPRENEURSHIP,



38


FACULTY OF MECHANICAL ENGINEERING


39


FACULTY OF MECHANICAL ENGINEERING INTRODUCTION

The Faculty of Mechanical Engineering is situated in the Royal town of Pekan in the state of Pahang. It is located at the waterfront facing the South China Sea, approximately 270 km to the east of the capital city of Kuala Lumpur.

The faculty offers eight (8) academic programmes wherein the development of academic and research activities are coordinated by seven (7) focus groups. The overall student enrollment is 1,200 where 85% consist of those in undergraduate programmes. The faculty is manned by 120 academic and technical support staff.

The faculty is currently embarking on Research and Development activities in the area of automotive, combustion, hybrid engine, NVH, robotic, CAD/CAM, CNC, products design and development as well as materials engineering and sustainable energy. This faculty aspires to be the centre of reference for automotive, manufacturing and oil and gas engineers, especially in the east coast region.

PROGRAMMES OFFERED

• Bachelor of Engineering (Hons.) Mechanical Engineering• Bachelor of Engineering (Hons.) Mechanical Engineering (Automotive) • Bachelor of Engineering (Hons.) Automotive Engineering - (Collaboration Programme with HsKA

Germany)• Diploma in Mechanical Engineering


• Mechanical Engineer• Automotive Engineer• Manufacturing Engineer• Oil & Gas Engineer• System Engineer• Design Engineer• Sales Engineer• Automation Engineer• Project Engineer• Industry Engineer• Product Engineer• Boiler Engineer• Power Plant Engineer• Tools Engineer• Quality Engineer• Maintenance Engineer• Production Engineer• Lecturer• Researcher


40


FACULTY OF MECHANICAL ENGINEERING CURRICULUM STRUCTURE

B.ENG (HONS.) AUTOMOTIVE ENGINEERING (COLLABORATION UMP – HSKA)

YEAR FIRST SECOND THIRD FOURTH FIFTH

SEMESTER FIRST SECOND FIRST SECOND FIRST SECOND FIRST SECOND FIRST

CO

UR

SES

BHA1113 ENGINEERING

MATERIALS

BHA1303 ELECTRICAL

AND ELECTRONICS ENGINEERING

BHA1133 DYNAMICS

BHA3613 MACHINE

ELEMENTS

BHA2313 MICROCOMPUTER

TECHNOLOGY

BHA3113 VEHICLE

ELECTRONICS 1

BHA3912 INTERNSHIP

BHA4113 VEHICLE

ELECTRONICS 2

BHA4011 QUALITY

MANAGEMENT

BHA1103 STATICS

BHA2123 MECHANICS OF

MATERIALS

BHA2513 THERMO

DYNAMICS

BHA3602 AUTOMOTIVE

PRODUCT DEVELOPMENT

BHA3313 SIGNALS AND

SYSTEMS

BHA3523 MECHANICAL VIBRATIONS

BHA3931 INTERNSHIP FOLLOW-UP

BHA4303 SENSORS AND

ACTUATORS

BHA4931 FINAL

EXAMINATION (VIVA)

BHA1602 TECHNICAL DRAWING

BHA2612 CAD

BHA1313 COMPUTER

PROGRAMMING

BHA2403 MANUFACTURING

PROCESSES

BHA3323 AUTOMATIC CONTROL

BHA3922 INTERNSHIP

PREPARATION

BHA4904 TEAM ORIENTED PROJECT STUDY

BHA4906 BACHELOR

THESIS

BHA1811 MECHANICAL LABORATORY

BHA1821 MECHANICAL

LABORATORY 2

BUM2413 APPLIED

STATISTICS

BHA2533 FLUID MECHANICS

BHA3513 HEAT TRANSFER

BHA3223 INTERNAL

COMBUSTION ENGINE

BHA4224

AUTOMOTIVE ENGINEERING

BHA4022 PROJECT

MANAGEMENT

BUM2123 APPLIED

CALCULUS

BUM2133 ORDINARY



BHA3021 OCCUPATIONAL

SAFETY & HEALTH

BHA3002 COMPUTER SIMULATION

BHA3233 SOFTWARE

ENGINEERING

BHA4902 PREPARATION

FOR BACHELOR THESIS

UGE2002 TECHNOPRE

NEURSHIP

UHR1012 ISLAMIC & ASIAN

CIVILIZATIONS

UQB1011 CO-

CURRICULUM 1

UQB2091 CO-

CURRICULUM 2


BHA3921 ENGINEERS AND

SOCIETY

BHA3012 FINITE ELEMENT

METHOD 1


METHOD 2

UHG1002 DEUTSCHE SPRACHE 1




UHM2022 ETHNICS

RELATIONS

TOTAL CREDIT 16 15 16 15 17 16 13 18 12

TOTAL CREDIT FOR

GRADUATION 138


41



B.ENG (HONS.) AUTOMOTIVE ENGINEERING (COLLABORATION UMP – HSKA)

YEAR FIRST SECOND THIRD FOURTH FIFTH

SEMESTER FIRST SECOND FIRST SECOND FIRST SECOND FIRST SECOND FIRST

CO

UR

SES

BHA1113 ENGINEERING

MATERIALS

BHA1303 ELECTRICAL

AND ELECTRONICS ENGINEERING

BHA1133 DYNAMICS

BHA3613 MACHINE

ELEMENTS

BHA2313 MICROCOMPUTER

TECHNOLOGY

BHA3113 VEHICLE

ELECTRONICS 1

BHA3912 INTERNSHIP

BHA4113 VEHICLE

ELECTRONICS 2

BHA4011 QUALITY

MANAGEMENT

BHA1103 STATICS

BHA2123 MECHANICS OF

MATERIALS

BHA2513 THERMO

DYNAMICS

BHA3602 AUTOMOTIVE

PRODUCT DEVELOPMENT

BHA3313 SIGNALS AND

SYSTEMS

BHA3523 MECHANICAL VIBRATIONS

BHA3931 INTERNSHIP FOLLOW-UP

BHA4303 SENSORS AND

ACTUATORS

BHA4931 FINAL

EXAMINATION (VIVA)

BHA1602 TECHNICAL DRAWING

BHA2612 CAD

BHA1313 COMPUTER

PROGRAMMING

BHA2403 MANUFACTURING

PROCESSES

BHA3323 AUTOMATIC CONTROL

BHA3922 INTERNSHIP

PREPARATION

BHA4904 TEAM ORIENTED PROJECT STUDY

BHA4906 BACHELOR

THESIS

BHA1811 MECHANICAL LABORATORY

BHA1821 MECHANICAL

LABORATORY 2

BUM2413 APPLIED

STATISTICS

BHA2533 FLUID MECHANICS

BHA3513 HEAT TRANSFER

BHA3223 INTERNAL

COMBUSTION ENGINE

BHA4224


BHA4022 PROJECT

MANAGEMENT

BUM2123 APPLIED

CALCULUS

BUM2133 ORDINARY



BHA3021 OCCUPATIONAL

SAFETY & HEALTH

BHA3002 COMPUTER SIMULATION

BHA3233 SOFTWARE

ENGINEERING

BHA4902 PREPARATION

FOR BACHELOR THESIS

UGE2002 TECHNOPRE

NEURSHIP


CIVILIZATIONS

UQB1011 CO-

CURRICULUM 1

UQB2091 CO-

CURRICULUM 2


BHA3921 ENGINEERS AND

SOCIETY


METHOD 1


METHOD 2





UHM2022 ETHNICS

RELATIONS

TOTAL CREDIT 16 15 16 15 17 16 13 18 12

TOTAL CREDIT FOR

GRADUATION 138


42



B.ENG (HONS.) MECHANICAL ENGINEERING (AUTOMOTIVE)



CO

UR

SES

*BUF1113 BASIC PHYSICS (LIFE SCIENCE

STREAM)

UHL2422 ENGLISH FOR

TECHNICAL COMM.


BMA2523 INTERNAL

COMBUSTION ENGINE

UHE3**2 ELECTIVE SOCIAL

SCIENCE


BMM3996 INDUSTRIAL

TRAINING


BMM4021 ENGINEER

AND SOCIETY

UHL2400 FUND. OF ENGLISH

LANGUAGE

UHR1012 ISLAMIC AND

ASIA CIVILISATION

BMM2673 THERMODYNAMICS

BMM2543 FLUIDS MECHANICS

2

BMM3513 HEAT TRANSFER

BMM3532 MEASUREMENT &

INSTRUMENTATION

UGE2002 TECHNO

PRENEURSHIP

BMA4924 FINAL YEAR

PROJECT 2

UHL2412 ENGLISH FOR

ACADEMIC COMM.

BMM1821 MECHANICAL

LABORATORY 2

BMM 2533 FLUIDS MECHANICS

1

BMM2521 ENG. MECHANICS

LAB 2

BMM3511 ENG. THERMO

FLUIDS LAB

BMM3553 MECHANICAL VIBRATIONS

BMA4912 FINAL YEAR PROJECT 1

BMA48*3 ELECTIVE 2

BMM1811 MECHANICAL

LABORATORY 1

BMM1553 DYNAMICS

BMM2613 COMPUTER AIDED

DESIGN

BMM 2433 ELECTRICAL & ELECTRONICS TECHNOLOGY

BMM3613 AUTOMATIC CONTROL

BMM3023 ENGINEERING

MANAGEMENT AND SAFETY

BMA4723 VEHICLE

DYNAMICS

BMA48*3 ELECTIVE 3

BMM1312 COMPUTER

PROGRAMMING

BMM1543 STRENGTH OF

MATERIALS


BUM2413 APPLIED

STATISTICS

BMA3623 ENGINE DESIGN

BMM3562 FEM

BMA4704 INTEGRATED

DESIGN PROJECT

BMA4763 VEHICLE

NOISE AND VIBRATION

BMM1563 STATICS

BMM1511 ENG.

MECHANICS LAB 1

BMA2312 INTRO. TO


UHL2432 ENGLISH FOR

PROFESSIONAL COMM.

UHF11*1 FOREIGN

LANGUAGE LEVEL 1

UHF21*1 FOREIGN

LANGUAGE LEVEL 2

BMA48*3 ELECTIVE 1

BMM1523 ENGINEERING

MATERIALS

BUM 2133 ORDINARY


BMM3643


BMM3633 INDUSTRIAL

ENGINEERING

BUM 2123 APPLIED

CALCULUS

UQB2**1 CO.

CURRICULUM 2

UQB1**1 CO.

CURRICULUM 1

TOTAL CREDIT 15 16 15 15 16 16 6 15 14

TOTAL CREDIT FOR

GRADUATION 128


43



B.ENG (HONS.) MECHANICAL ENGINEERING (AUTOMOTIVE)



CO

UR

SES


STREAM)

UHL2422 ENGLISH FOR

TECHNICAL COMM.


BMA2523 INTERNAL

COMBUSTION ENGINE


SCIENCE


BMM3996 INDUSTRIAL

TRAINING


BMM4021 ENGINEER

AND SOCIETY


LANGUAGE

UHR1012 ISLAMIC AND

ASIA CIVILISATION

BMM2673 THERMODYNAMICS

BMM2543 FLUIDS MECHANICS

2



INSTRUMENTATION

UGE2002 TECHNO

PRENEURSHIP

BMA4924 FINAL YEAR

PROJECT 2

UHL2412 ENGLISH FOR

ACADEMIC COMM.

BMM1821 MECHANICAL

LABORATORY 2

BMM 2533 FLUIDS MECHANICS

1

BMM2521 ENG. MECHANICS

LAB 2

BMM3511 ENG. THERMO

FLUIDS LAB


BMA4912 FINAL YEAR PROJECT 1

BMA48*3 ELECTIVE 2

BMM1811 MECHANICAL

LABORATORY 1

BMM1553 DYNAMICS


DESIGN



BMM3023 ENGINEERING


BMA4723 VEHICLE

DYNAMICS

BMA48*3 ELECTIVE 3

BMM1312 COMPUTER

PROGRAMMING

BMM1543 STRENGTH OF

MATERIALS


BUM2413 APPLIED

STATISTICS

BMA3623 ENGINE DESIGN

BMM3562 FEM

BMA4704 INTEGRATED

DESIGN PROJECT

BMA4763 VEHICLE

NOISE AND VIBRATION

BMM1563 STATICS

BMM1511 ENG.

MECHANICS LAB 1

BMA2312 INTRO. TO


UHL2432 ENGLISH FOR

PROFESSIONAL COMM.

UHF11*1 FOREIGN

LANGUAGE LEVEL 1

UHF21*1 FOREIGN

LANGUAGE LEVEL 2

BMA48*3 ELECTIVE 1

BMM1523 ENGINEERING

MATERIALS

BUM 2133 ORDINARY


BMM3643


BMM3633 INDUSTRIAL

ENGINEERING

BUM 2123 APPLIED

CALCULUS

UQB2**1 CO.

CURRICULUM 2

UQB1**1 CO.

CURRICULUM 1

TOTAL CREDIT 15 16 15 15 16 16 6 15 14

TOTAL CREDIT FOR

GRADUATION 128

ELECTIVE COURSES FOR B.ENG (HONS.) MECHANICAL ENGINEERING (AUTOMOTIVE)


1 BMA 4803 AUTOMOTIVE ADVANCE TECHNOLOGY 3

2 BMA 4813 AUTOMOTIVE DEVELOPMENT PROCESS 3

3 BMA 4823 ENERGY EFFICIENT VEHICLE 3

4 BMA 4833 AUTOMOTIVE ELECTRIC AND ELECTRONICS 3

5 BMA 4843 ALTERNATIVE FUEL 3

6 BMA 4853 DIESEL ENGINE TECHNOLOGY 3

7 BMA 4863 MOTORSPORTS ENGINEERING 3

8 BMA 4873 HEAVY DUTY VEHICLES 3



44



45



B.ENG (HONS.) MECHANICAL ENGINEERING



CO

UR

SES


STREAM)

UHL2422 ENGLISH FOR

TECHNICAL COMM.


UHL2432 ENGLISH FOR

PROFESSIONAL COMM.


SCIENCE

BMM3531 ENG. THERMO DYNAMICS LAB

BMM3996

INDUSTRIAL TRAINING


UHM2022 ETHNIC

RELATIONS


LANGUAGE

UHR1012 ISLAMIC AND

ASIA CIVILISATION

BMM2673 THERMO

DYNAMICS

BMM2683 APPLIED THERMO

DYNAMICS



UGE2002 TECHNOPRE-

NEURSHIP

BMM4021 ENGINEER AND

SOCIETY

UHL2412 ENGLISH FOR

ACADEMIC COMM.

BMM1553 DYNAMICS

BMM2583 STRENGTH OF MATERIALS 2

BMM2521 ENG.

MECHANICS LAB 2



INSTRUMENTATION

BMM4912 FINAL

YEAR PROJECT 1

BMM4924 FINAL YEAR PROJECT 2

BMM1312 COMPUTER

PROGRAMMING


BMM 2533 FLUIDS MECHANICS 1

BMM2543 FLUIDS

MECHANICS 2

BMM3623 MECHANICAL

DESIGN

BMM3562 FEM

BMM4704 INTEGRATED

DESIGN PROJECT

BMM1563 STATICS

BMM1511 ENG.

MECHANICS LAB 1


BUM2413 APPLIED

STATISTICS

BMM3521 ENG. FLUID

MECHANICS LAB

BMM3023 ENGINEERING


BMM4**3 ELECTIVE 1

BMM4**3 ELECTIVE 3

BMM1523 ENGINEERING

MATERIALS

BUM 2133 ORDINARY



DESIGN


UHF11*1 FOREIGN

LANGUAGE LEVEL 1

UHF21*1 FOREIGN LANGUAGE

LEVEL 2

BMM4**3 ELECTIVE 2

BMM4**3 ELECTIVE 4

BUM2123 APPLIED

CULCULUS

BMM1821 MECHANICAL LABORATORY

2


DESIGN


BMM3643 MANUFACTURING

PROCESSES

BMM3633 INDUSTRIAL

ENGINEERING

BMM1811 MECHANICAL

LABORATORY 1

UQB2**1 CO.

CURRICULUM 2

BMM3611 MANUFACTURING PROCESSES LAB

UQB1**1

CO. CURRICULUM 1

TOTAL CREDIT 15 16 16 15 16 16 6 15 13

TOTAL CREDIT FOR

GRADUATION 128


46


ELECTIVE COURSES FOR BACHELOR OF MECHANICAL ENGINEERING (HONOURS)


1 BMM 4703 HYDRAULICS AND PNEUMATICS 3

2 BMM4713 STRESS ANALYSIS 3

3 BMM 4723 MECHANISM DESIGN 3

4 BMM 4733 POWER PLANT TECHNOLOGY 3

5 BMM4893 MECHANICS OF COMPOSITE MATERIALS 3

6 BMM 4753 RENEWABLE ENERGY RESOURCES 3

7 BMM 4763 FATIGUE DESIGN AND ANALYSIS 3

8 BMM 4773 MATERIALS CHARACTERIZATION 3

9 BMM 4783 COMPUTATIONAL FLUID DYANAIMCS (CFD) 3

10 BMM4793 WELDING AND JOINING TECHNOLOGY 3

11 BMM4803 CORROSION SCIENCE AND ENGINEERING 3

12 BMM4813 ERGONOMICS 3

13 BMM4823 PRODUCTION PLANNING CONTROL 3

14 BMM4833 QUALITY ENGINEERING 3

15 BMM4843 PLASTICS INJECTION TECHNOLOGY 3

16 BMM4853 AIR CONDITIONING AND REFRIGERATION 3

17 BMM4863 DESIGN FOR MANUFACTURED & ASSEMBLY 3

18 BMM4873 CAD/CAM 3

19 BMM4883 METAL CASTINGS 3



47

























48






CO

UR

SES


STREAM)

UHL2422 ENGLISH FOR

TECHNICAL COMM.


UHL2432 ENGLISH FOR

PROFESSIONAL COMM.


SCIENCE


BMM3996

INDUSTRIAL TRAINING


UHM2022 ETHNIC

RELATIONS


LANGUAGE

UHR1012 ISLAMIC AND

ASIA CIVILISATION

BMM2673 THERMO

DYNAMICS


DYNAMICS



UGE2002 TECHNOPRE-

NEURSHIP


SOCIETY

UHL2412 ENGLISH FOR

ACADEMIC COMM.

BMM1553 DYNAMICS


BMM2521 ENG.

MECHANICS LAB 2



INSTRUMENTATION

BMM4912 FINAL

YEAR PROJECT 1


BMM1312 COMPUTER

PROGRAMMING



BMM2543 FLUIDS

MECHANICS 2

BMM3623 MECHANICAL

DESIGN

BMM3562 FEM

BMM4704 INTEGRATED

DESIGN PROJECT

BMM1563 STATICS

BMM1511 ENG.

MECHANICS LAB 1


BUM2413 APPLIED

STATISTICS

BMM3521 ENG. FLUID

MECHANICS LAB

BMM3023 ENGINEERING


BMM4**3 ELECTIVE 1

BMM4**3 ELECTIVE 3

BMM1523 ENGINEERING

MATERIALS

BUM 2133 ORDINARY



DESIGN


UHF11*1 FOREIGN

LANGUAGE LEVEL 1


LEVEL 2

BMM4**3 ELECTIVE 2

BMM4**3 ELECTIVE 4

BUM2123 APPLIED

CULCULUS


2


DESIGN



PROCESSES

BMM3633 INDUSTRIAL

ENGINEERING

BMM1811 MECHANICAL

LABORATORY 1

UQB2**1 CO.

CURRICULUM 2


UQB1**1

CO. CURRICULUM 1

TOTAL CREDIT 15 16 16 15 16 16 6 15 13

TOTAL CREDIT FOR

GRADUATION 128


49






CO

UR

SES


STREAM)

UHL2422 ENGLISH FOR

TECHNICAL COMM.


UHL2432 ENGLISH FOR

PROFESSIONAL COMM.


SCIENCE


BMM3996

INDUSTRIAL TRAINING


UHM2022 ETHNIC

RELATIONS


LANGUAGE

UHR1012 ISLAMIC AND

ASIA CIVILISATION

BMM2673 THERMO

DYNAMICS


DYNAMICS



UGE2002 TECHNOPRE-

NEURSHIP


SOCIETY

UHL2412 ENGLISH FOR

ACADEMIC COMM.

BMM1553 DYNAMICS


BMM2521 ENG.

MECHANICS LAB 2



INSTRUMENTATION

BMM4912 FINAL

YEAR PROJECT 1


BMM1312 COMPUTER

PROGRAMMING



BMM2543 FLUIDS

MECHANICS 2

BMM3623 MECHANICAL

DESIGN

BMM3562 FEM

BMM4704 INTEGRATED

DESIGN PROJECT

BMM1563 STATICS

BMM1511 ENG.

MECHANICS LAB 1


BUM2413 APPLIED

STATISTICS

BMM3521 ENG. FLUID

MECHANICS LAB

BMM3023 ENGINEERING


BMM4**3 ELECTIVE 1

BMM4**3 ELECTIVE 3

BMM1523 ENGINEERING

MATERIALS

BUM 2133 ORDINARY



DESIGN


UHF11*1 FOREIGN

LANGUAGE LEVEL 1


LEVEL 2

BMM4**3 ELECTIVE 2

BMM4**3 ELECTIVE 4

BUM2123 APPLIED

CULCULUS


2


DESIGN



PROCESSES

BMM3633 INDUSTRIAL

ENGINEERING

BMM1811 MECHANICAL

LABORATORY 1

UQB2**1 CO.

CURRICULUM 2


UQB1**1

CO. CURRICULUM 1

TOTAL CREDIT 15 16 16 15 16 16 6 15 13

TOTAL CREDIT FOR

GRADUATION 128
























50



51



DIPLOMA IN MECHANICAL ENGINEERING


SEMESTER PRELIMINARY (0) FIRST SECOND FIRST SECOND FIRST

CO

UR

SES

UHL1412 FOUNDATION

ENGLISH

UHL1422 ENGLISH FOR

GENERAL CUMMUNICATION

UHL1432 ENGLISH FOR


UGE1002 BASIC

ENTREPRENEURSHIP

DMM3011 OCCUPATIONAL

SAFETY & HEALTH

DMM3999 INDUSTRIAL

TRAINING

UQB1011 BRIGED SISWA

UHR1012 ISLAMIC & ASIAN CIVILIZATIONS I

UHM2022 ETHNIC

RELATION

DUM2413 ENGINEERING

STATISTICS

DMM2533 FLUID

MECHANICS

DMM3993 INDUSTRIAL

TRAINING REPORT

DUM1113 BASIC

MATHEMATICS

DUF1113 PHYSICS

UHS 1021 SOFT SKILLS 1

DMM2633 MANUFACTURING

TECHNOLOGY

DMM2632 INDUSTRIAL

DESIGN

DUK1113 GENERAL

CHEMISTRY

DMM1911 MECHANICAL TECHNOLOGY

LAB 1


DMM3623 HYDRAULICS & PNEUMATICS TECHNOLOGY

DUM1123 CALCULUS

DMM1423 ELECTRICAL AND

ELECTRONIC TECHNOLOGY

DMM2513 SOLID MECHANICS

DMM3673 MECHANICAL

DESIGN

DMM1312

COMPUTER PROGRAMMING

DMM1523 ENGINEERING

MATERIALS

DMM2523 DYNAMICS

DMM3663 CNC

TECHNOLOGY

DMM1413

ENGINEERING DRAWING & CAD

DMM1532 STATICS

DMM2543 THERMODYNAMICS

DMM3914 FINAL YEAR

PROJECT

DMM2412 METROLOGY

DMM1921 MECHANICAL

TECHNOLOGY LAB 2

TOTAL CREDIT 6 18 16 19 19 12

TOTAL CREDIT FOR

GRADUATION 90


52


FACULTY OF INDUSTRIAL SCIENCES & TECHNOLOGY


53



INTRODUCTION

The Faculty of Industrial Sciences & Technology, Universiti Malaysia Pahang was established in May 2008 with the initial offering of the Bachelor of Applied Science (Honours) Industrial Chemistry in the 2008/2009 Academic Session, followed by the Bachelor of Applied Science (Honours) Industrial Biotechnology in the 2009/2010 Session. The latest program addition is the Bachelor of Applied Science (Honours) Material Technology with the first intake of students in Semester I of the 2012/2013 Session.

The main objective of the faculty is to address the need for increased manpower requirements in Science and Technology. It also aligns efforts to increase knowledgeable and competent human capital especially Research Scientist and Engineers (RSE) as well as technical support for petrochemical, oleo-chemical, bio resources, and material technology based industries.

PROGRAMMES OFFEREDFor the 2015/2016 intake, three programmes are offered as follows:

• Bachelor of Applied Science (Honours) - Industrial Chemistry• Bachelor of Applied Science (Honours) - Industrial Biotechnology• Bachelor of Applied Science (Honours) – Material Technology


• Chemist • Technologist• Quality Control Engineer• Consultant• Academician• Process Engineer • Sales & Marketing Executive• Researcher• Science Officer• Entrepreneur• Scientist• Material Analyst• QA/QC Executive• Manufacturing Engineer• Project Manager And Technical Service Manager• Clinical Researchers• Regulatory Officer• Technical Services Executive• Manufacturing And Production Associate• Process Development Engineer • Production Planner/Scheduler• Instrument/Calibration Officer• Process Development Associate


54



CURRICULUM STRUCTURE BACHELOR OF APPLIED SCIENCES (HONS.) IN INDUSTRIAL CHEMISTRY


SEMESTER FIRST SECOND FIRST SECOND FIRST SECOND FIRST SECOND

FAC

ULT

Y &

PR

OG

RA

MM

E C

OU

RSE

S

UHL2312 TECHNICAL

ENGLISH

UHL2322 TECHNICAL

WRITING

UHL2332 ACADEMIC REPORT

WRITING

UHL4012 ELECTIVE

SOCIAL SCIENCES

UHF2**1 FOREIGN

LANGUAGE II

BSK3143 UNIT

OPERATION

BSK4153 ADVANCED

INSTRUMENTATION TECHNIQUE

BSK4608 INDUSTRIAL

TRAINING

UHR1012 ISLAMIC &

ASIAN CIVILIZATION

I

UQ* 20** CO-

CURICCULUM II

UHM2022 ETHNIC

RELATIONSHIP

UGE2002 TECHNO

PRENEURSHIP

UHS2011 SOFTSKILLS II

BSK3472 UNIT

OPERATION LABORATORY

BSK4314 FINAL YEAR PROJECT II

BSK4614 INDUSTRIAL

TRAINING REPORT

UQB1011 CO-

CURICCULUM I

BSK1143 INORGANIC

CHEMISTRY I

BSK2143 INSTRUMENTATION

METHOD

UHF1**1 FOREIGN

LANGUAGE I

BSK3102 ORGANIC

SPECTROSCOPY

BSK3153 ORGANIC

CHEMISTRY PROCESS

BSK3**3 ELECTIVE IV

BSK1103 ORGANIC

CHEMISTRY I

BSK1153 INORGANIC CHEMISTRY

LABORATORY


METHOD LABORATORY

UHS1011 SOFTSKILL I

BSK3462 ORGANIC

SPECTROSCOPY LABORATORY

BSK3302 FINAL YEAR PROJECT I

BSK3**3 ELECTIVE V

BSK1402 ORGANIC

CHEMISTRY LABORATORY

BSK1153 ANALYTICAL CHEMISTRY

BSF2222 LABORATORY

QUALITY MANAGEMENT

BSK2133 SEPARATION TECHNIQUE

BSF3232 METHOD

VALIDATION & VERIFICATION

BSK3**3 ELECTIVE II

BSK1133 PHYSICAL

CHEMISTRY


LABORATORY

BSK2183 THERMODYNAMICS

BSK2133 MATERIAL

CHEMISTRY

BSK3163 INORGANIC CHEMISTRY PROCESS

BSK3**3 ELECTIVE III

BS1412 PHYSICAL


BUM2413 APPLIED

STATISTICS

BSK2002 BUSINESS

ORGANIZATION SKILL

BSK2452 MATERIAL


BSK3**3 ELECTIVE I

BUM2123 APPLIED

CALCULUS

BSF1212 LABORATORY

SAFETY MANAGEMENT

BSF2232 QA&QC FOR

TESTING LABORATORY

TOTAL CREDIT 18 18 16 16 15 16 13 12

TOTAL CREDIT FOR

GRADUATION 124


55



CURRICULUM STRUCTURE BACHELOR OF APPLIED SCIENCES (HONS.) IN INDUSTRIAL CHEMISTRY



FAC

ULT

Y &

PR

OG

RA

MM

E C

OU

RSE

S

UHL2312 TECHNICAL

ENGLISH

UHL2322 TECHNICAL

WRITING


WRITING

UHL4012 ELECTIVE

SOCIAL SCIENCES

UHF2**1 FOREIGN

LANGUAGE II

BSK3143 UNIT

OPERATION

BSK4153 ADVANCED

INSTRUMENTATION TECHNIQUE

BSK4608 INDUSTRIAL

TRAINING

UHR1012 ISLAMIC &

ASIAN CIVILIZATION

I

UQ* 20** CO-

CURICCULUM II

UHM2022 ETHNIC

RELATIONSHIP

UGE2002 TECHNO

PRENEURSHIP

UHS2011 SOFTSKILLS II

BSK3472 UNIT

OPERATION LABORATORY

BSK4314 FINAL YEAR PROJECT II

BSK4614 INDUSTRIAL

TRAINING REPORT

UQB1011 CO-

CURICCULUM I

BSK1143 INORGANIC

CHEMISTRY I


METHOD

UHF1**1 FOREIGN

LANGUAGE I

BSK3102 ORGANIC

SPECTROSCOPY

BSK3153 ORGANIC

CHEMISTRY PROCESS

BSK3**3 ELECTIVE IV

BSK1103 ORGANIC

CHEMISTRY I

BSK1153 INORGANIC CHEMISTRY

LABORATORY


METHOD LABORATORY

UHS1011 SOFTSKILL I

BSK3462 ORGANIC

SPECTROSCOPY LABORATORY

BSK3302 FINAL YEAR PROJECT I

BSK3**3 ELECTIVE V

BSK1402 ORGANIC



BSF2222 LABORATORY

QUALITY MANAGEMENT

BSK2133 SEPARATION TECHNIQUE

BSF3232 METHOD

VALIDATION & VERIFICATION

BSK3**3 ELECTIVE II

BSK1133 PHYSICAL

CHEMISTRY


LABORATORY

BSK2183 THERMODYNAMICS

BSK2133 MATERIAL

CHEMISTRY

BSK3163 INORGANIC CHEMISTRY PROCESS

BSK3**3 ELECTIVE III

BS1412 PHYSICAL


BUM2413 APPLIED

STATISTICS

BSK2002 BUSINESS

ORGANIZATION SKILL

BSK2452 MATERIAL


BSK3**3 ELECTIVE I

BUM2123 APPLIED

CALCULUS

BSF1212 LABORATORY

SAFETY MANAGEMENT

BSF2232 QA&QC FOR

TESTING LABORATORY

TOTAL CREDIT 18 18 16 16 15 16 13 12

TOTAL CREDIT FOR

GRADUATION 124

ELECTIVE COURSES FOR BACHELOR OF APPLIED SCIENCE (HONOURS) IN INDUSTRIAL CHEMISTRY


1

BSK3513

PETROCHEMISTRY 3

2

BSK3523

OLEOCHEMISTRY 3

3

BSK3533

POLYMER CHEMISTRY 3

4

BSK3573

FLAVOR AND FRAGRANCE CHEMISTRY 3

5 BSK3583 ELECTROCHEMISTRY 3

6 BSK3593 ENVIRONMENTAL CHEMISTRY 3

7 BSK3613 RENEWABLE ENERGY 3

8 BSK3623 FOOD AND AGRICULTURE CHEMISTRY 3

9 BSK3633 MEDICINAL CHEMISTRY 3



56


FACULTY OF INDUSTRIAL SCIENCES & TECHNOLOGY CURRICULUM STRUCTURE

BACHELOR OF APPLIED SCIENCE (HONOURS) INDUSTRIAL BIOTECHNOLOGY



FAC

ULT

Y &

PR

OG

RA

MM

E C

OU

RSE

S

UHL2312 TECHNICAL

ENGLISH

UHL2322 TECHNICAL

WRITING


WRITING

UHE33**2 ELECTIVE

CMHLS

UHF2**1 FOREIGN

LANGUAGE II

BSB3163 PLANT AND

MAMMALIAN CELL TECHNOLOGY

EXTRACTION AND BIOSEPARATION

BSB4608 INDUSTRIAL

TRAINING


CIVILIZATION I (TITAS)

UQB1011 CO-CURRICULUM I

UHS1011 SOFT SKILLS I

UHF1**1 FOREIGN

LANGUAGE I

UHS1011 SOFT SKILLS II

BSB3442 PLANT AND

MAMMALIAN CELL TECHNOLOGY LABORATORY

BSB4422 EXTRACTION AND BIOSEPARATION

LABORATORY

BSSB4604 INDUSTRIAL

TRAINING REPORT

BUM2123 APPLIED

CALCULUS

UHM2022 ETHNIC

RELATIONSHIP

UQ*20** CO-CURRICULUM II

BSF2232 QA&QC FOR TEESTING

LABORATORY

BSF3242 VALIDATION & UNCERTAINTY

BSB3312 FINAL YEAR PROJECT I

BSB4324 FINAL YEAR PROJECT II

BSF1202 LABORATORY

SAFETY MANAGEMENT

BUM24113 APPLIED

STATISTICS

BSF2222 LABORATORY

QUALITY MANAGEMENT

BSB2143 ENZYME

TECHNOLOGY

BSB3113 GENE

TECHNOLOGY

BSB35*3 ELECTIVE I

BSB35*3 ELECTIVE III

BSB1113 BIOCHEMISTRY

BSB1173 MICROBIOLOGY

BSB2173 CELL AND

MOLECULAR BIOLOGY

BSB2452 ENZYME

TECHNOLOGY LABORATORY

BSB3472 GENE


BSB35*3 ELECTIVE II

BSB1402 BIOCHEMISTRY LABORATORY

BSB1432 MICROBIOLOGY LABORATORY

BSB2472 CELL AND

MOLECULAR BIOLOGY

LABORATORY

BSB2193 INDUSTRIAL

MICROBIOLOGY

BSB3123 BIOPROCESS TECHNOLOGY

BSB1102 BIOPHYSICAL CHEMISTRY

BSB1133 ORGANIC

CHEMISTRY

BSB2173 BIOANALYTICAL

CHEMISTRY

BSB2462 INDUSTRIAL

MICROBIOLOGY LABORATORY

BSB3482 BIOPROCESS TECHNOLOGY LABORATORY

BSB1112 INDUSTRIAL

BIOTECHNOLOGY

BSB1422 ORGANIC




BSB2002 BUSINESS

ORGANIZATION SKILL

UGE2002 TECHNO

PRENEURSHIP

BSB2122

GENETICS

TOTAL CREDIT 18 18 18 17 16 13 12 12

TOTAL CREDIT FOR

GRADUATION 124


57



BACHELOR OF APPLIED SCIENCE (HONOURS) INDUSTRIAL BIOTECHNOLOGY



FAC

ULT

Y &

PR

OG

RA

MM

E C

OU

RSE

S

UHL2312 TECHNICAL

ENGLISH

UHL2322 TECHNICAL

WRITING


WRITING

UHE33**2 ELECTIVE

CMHLS

UHF2**1 FOREIGN

LANGUAGE II

BSB3163 PLANT AND

MAMMALIAN CELL TECHNOLOGY

EXTRACTION AND BIOSEPARATION

BSB4608 INDUSTRIAL

TRAINING




UHS1011 SOFT SKILLS I

UHF1**1 FOREIGN

LANGUAGE I

UHS1011 SOFT SKILLS II

BSB3442 PLANT AND

MAMMALIAN CELL TECHNOLOGY LABORATORY

BSB4422 EXTRACTION AND BIOSEPARATION

LABORATORY

BSSB4604 INDUSTRIAL

TRAINING REPORT

BUM2123 APPLIED

CALCULUS

UHM2022 ETHNIC

RELATIONSHIP


BSF2232 QA&QC FOR TEESTING

LABORATORY

BSF3242 VALIDATION & UNCERTAINTY

BSB3312 FINAL YEAR PROJECT I

BSB4324 FINAL YEAR PROJECT II

BSF1202 LABORATORY

SAFETY MANAGEMENT

BUM24113 APPLIED

STATISTICS

BSF2222 LABORATORY

QUALITY MANAGEMENT

BSB2143 ENZYME

TECHNOLOGY

BSB3113 GENE

TECHNOLOGY

BSB35*3 ELECTIVE I

BSB35*3 ELECTIVE III

BSB1113 BIOCHEMISTRY

BSB1173 MICROBIOLOGY

BSB2173 CELL AND

MOLECULAR BIOLOGY

BSB2452 ENZYME


BSB3472 GENE


BSB35*3 ELECTIVE II

BSB1402 BIOCHEMISTRY LABORATORY

BSB1432 MICROBIOLOGY LABORATORY

BSB2472 CELL AND

MOLECULAR BIOLOGY

LABORATORY

BSB2193 INDUSTRIAL

MICROBIOLOGY

BSB3123 BIOPROCESS TECHNOLOGY

BSB1102 BIOPHYSICAL CHEMISTRY

BSB1133 ORGANIC

CHEMISTRY


CHEMISTRY

BSB2462 INDUSTRIAL

MICROBIOLOGY LABORATORY

BSB3482 BIOPROCESS TECHNOLOGY LABORATORY

BSB1112 INDUSTRIAL

BIOTECHNOLOGY

BSB1422 ORGANIC




BSB2002 BUSINESS

ORGANIZATION SKILL

UGE2002 TECHNO

PRENEURSHIP

BSB2122

GENETICS

TOTAL CREDIT 18 18 18 17 16 13 12 12

TOTAL CREDIT FOR

GRADUATION 124

ELECTIVE COURSES FOR BACHELOR OF APPLIED SCIENCE (HONOURS) INDUSTRIAL BIOTECHNOLOGY


1 BSB3573 REACTOR DESIGN 3

2 BSB33583 ADVANCED ENZYME TECHNOLOGY 3

3 BSB3593 BIOSENSOR TECHNOLOGY 3

4 BSB3503 BIOMANUFACTURING 3

5 BSB3563 BIOREMEDIATION 3



58



BACHELOR OF APPLIED SCIENCE (HONOURS) - MATERIAL TECHNOLOGY



FAC

ULT

Y &

PR

OG

RA

MM

E C

OU

RSE

S

BSP1113 PHYSICAL

CHEMISTRY

BSP1133 ORGANIC

CHEMISTRY

BSP2153 MATERIAL SCIENCE &

TECHNOLOGY

BSP2183 SURFACE

CHARACTERIZATION & ANALYSIS

BSP3112 CERAMICS

BSP3133 NONDESTRUCTIVE

BSP4152 MATERIAL

PROCESSING

BSP4608 INDUSTRIAL

TRAINING

BSP1123 PHYSICS I

BSP1143 PHYSICS II

BSP2163 COLLOID & SURFACE

SCIENCE

BSP2193 RHEOLOGY

BSP3123 POLYMER AND

COMPOSITE

BSP3142 METAL & ALLOY

BSP4163 NANOTECHNOLOGY

BSP4614 INDUSTRIAL

TRAINING REPORT

BSP1402 PHYSICS I

LABORATORY

BSP1412 PHYSICS II

LABORATORY

BSP2422 MATERIAL SCIENCE AND SOLID STATE

PHYSICS LABORATORY

BSP2432 RHEOLOGY & COLLOID

LAB

BSP3442 POLYMER,

COMPOSITE AND CERAMICS

LABORATORY

BSP3302 FINAL YEAR PROJECT I

BSP4314 FINAL YEAR PROJECT

II

BSF2222 LABORATORY

QUALITY MANAGEMENT

BSF1212 LABORATORY

SAFETY MANAGEMENT

BSP2173 SOLID STATE

PHYSICS I

BSP2103 SOLID STATE

PHYSICS II

BSF3232 METHOD

VALIDATION & VERIFICATION FOR ANALYSIS

BSP3452 ADVANCED MATERIAL

LABORATORY

ELECTIVE IV

BUM2123 APPLIED

CALCULUS

BUM2413 APPLIED

STATISTICS

BSP2002 BUSINESS

ORGANIZATION SKILL

BSF2232 QA & QC FOR TESTING

LABORATORY ELECTIVE I ELECTIVE II ELECTIVE V

UHL2312 TECHNICAL

ENGLISH

UHL2322 TECHNICAL

WRITING



UHE33**2 ELECTIVE

CMHLS

ELECTIVE III



UHM2022 ETHNIC

RELATIONSHIP


WRITING

UGE2002 TECHNO

PRENEURSHIP

UHF2**1 FOREIGN

LANGUAGE II

UHS1011

SOFT SKILLS I

UHF1**1 FOREIGN LANGUAGE I

UHS1011

SOFT SKILLS II

TOTAL CREDIT 17 17 17 17 16 16 15 12

TOTAL CREDIT FOR

GRADUATION 127


59



BACHELOR OF APPLIED SCIENCE (HONOURS) - MATERIAL TECHNOLOGY



FAC

ULT

Y &

PR

OG

RA

MM

E C

OU

RSE

S

BSP1113 PHYSICAL

CHEMISTRY

BSP1133 ORGANIC

CHEMISTRY

BSP2153 MATERIAL SCIENCE &

TECHNOLOGY

BSP2183 SURFACE

CHARACTERIZATION & ANALYSIS

BSP3112 CERAMICS

BSP3133 NONDESTRUCTIVE

BSP4152 MATERIAL

PROCESSING

BSP4608 INDUSTRIAL

TRAINING

BSP1123 PHYSICS I

BSP1143 PHYSICS II

BSP2163 COLLOID & SURFACE

SCIENCE

BSP2193 RHEOLOGY

BSP3123 POLYMER AND

COMPOSITE

BSP3142 METAL & ALLOY

BSP4163 NANOTECHNOLOGY

BSP4614 INDUSTRIAL

TRAINING REPORT

BSP1402 PHYSICS I

LABORATORY

BSP1412 PHYSICS II

LABORATORY

BSP2422 MATERIAL SCIENCE AND SOLID STATE

PHYSICS LABORATORY

BSP2432 RHEOLOGY & COLLOID

LAB

BSP3442 POLYMER,

COMPOSITE AND CERAMICS

LABORATORY

BSP3302 FINAL YEAR PROJECT I

BSP4314 FINAL YEAR PROJECT

II

BSF2222 LABORATORY

QUALITY MANAGEMENT

BSF1212 LABORATORY

SAFETY MANAGEMENT

BSP2173 SOLID STATE

PHYSICS I

BSP2103 SOLID STATE

PHYSICS II

BSF3232 METHOD

VALIDATION & VERIFICATION FOR ANALYSIS

BSP3452 ADVANCED MATERIAL

LABORATORY

ELECTIVE IV

BUM2123 APPLIED

CALCULUS

BUM2413 APPLIED

STATISTICS

BSP2002 BUSINESS

ORGANIZATION SKILL

BSF2232 QA & QC FOR TESTING

LABORATORY ELECTIVE I ELECTIVE II ELECTIVE V

UHL2312 TECHNICAL

ENGLISH

UHL2322 TECHNICAL

WRITING



UHE33**2 ELECTIVE

CMHLS

ELECTIVE III



UHM2022 ETHNIC

RELATIONSHIP


WRITING

UGE2002 TECHNO

PRENEURSHIP

UHF2**1 FOREIGN

LANGUAGE II

UHS1011

SOFT SKILLS I

UHF1**1 FOREIGN LANGUAGE I

UHS1011

SOFT SKILLS II

TOTAL CREDIT 17 17 17 17 16 16 15 12

TOTAL CREDIT FOR

GRADUATION 127

ELECTIVE COURSES FOR BACHELOR OF APPLIED SCIENCE (HONOURS) – MATERIAL TECHNOLOGY

CODE COURSE CREDIT HOUR

BSP3503

SOLAR CELL TECHNOLOGY 3

BSP3513

ELECTRONIC CERAMICS

3

BSP3523

LIQUID CRYSTAL TECHNOLOGY

3

BSP3533

SUPERCAPACITOR TECHNOLOGY

3

BSP3543

THIN FILM TECHNOLOGY

3

BSP3553

CORROSION 3

BSP3563

RECYCLE TECHNOLOGY 3

BSP3573

MOLECULAR MODELING 3

BSP3583

SEMICONDUCTOR DEVICES 3

BSP3593

COMPUTATIONAL PHYSICS 3

BSP3503

SOLAR CELL TECHNOLOGY 3

TOTAL MINIMUM CREDITS OF ELECTIVE COURSES FOR GRADUATION

15


60


FACULTY OF CHEMICAL & NATURAL RESOURCES

ENGINEERING


61


FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERING

INTRODUCTION

The Faculty of Chemical and Natural Resources Engineering was established on 15 February 2002. The first set of programmes offered to students enrolling for session 2002/2003 was Bachelor in Chemical Engineering and Diploma in Chemical Engineering. Two additional programmes were offered to students starting with enrolments for session 2003/2004 namely Bachelor in Chemical Engineering (Biotechnology) and Bachelor in Chemical Engineering (Gas Technology).

These were competency-based and application-based programmes, with emphasis on the combination of theory and practical skills in a learning process which identifies the problems and challenges in industry and solve them. These programmes cover the areas of separation process, chemical reaction engineering, process engineering, system control and environmental engineering. These three (3) Bachelor programmes were later upgraded to fulfill the requirements for accreditation with the Engineering Accreditation Council (EAC), under the Washington Accord, and were all duly accredited under the EAC. On 12 October 2010 the Faculty was approved by the Ministry of Higher Education Malaysia to offer Masters of Chemical Engineering with Entrepreneurship (by coursework) and intake of students was started in semester 1 of session 2011/2012. PROGRAMMES OFFERED

a) Bachelor of Chemical Engineeringb) Diploma in Chemical Engineering (Process Plant) – Fulltimec) Diploma in Chemical Engineering (Process Plant) – Partime


• Chemical Engineer • Production Engineer• Project Engineer • Energy Engineer• Design Engineer • Materials Engineer• Operations Engineer • Sales Engineer• Research & Development Engineer • Pharmaceutical Engineer• Process Plant Engineer • Bioprocess Engineer• Quality Assurance Engineer • Consulting Engineer• Instrumentation/Control Engineer • Oil & Gas Engineer• Technopreneur/Management • Lecturer


62


FACULTY OF CHEMICAL ENGINEERING & NATURAL RESOURCES CURRICULUM STRUCTURE

BACHELOR OF CHEMICAL ENGINEERING (HONOURS)


BK

F491

6 - I

ND

UST

RIA

L TR

AIN

ING

(LI)

12 W

EEK

S

FOURTH


CO

UR

SES

UHL2412 ENGLISH FOR


UHL2422 ENGLISH FOR



CIVILISATIONS 1

UHL2432 ENGLISH FOR


UHM2022 ETHNIC

RELATIONS

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

UHE3**2 ELECTIVE COURSES

BKC4934 PROCESS &

PLANT DESIGN II

UQB1**1 CO-CURRICULUM I


BUM2413 APPLIED

STATISTICS

BKF2143 COMPUTER


UQ*2**1 CO-

CURRICULUM II

UHS 2021

SOFT SKILLS 2 BKC 3**3 ELECTIVE 2

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

BUM2133 ORDINARY



BKF2332 ELECTRICAL &

INSTRUMENTATION TECHNOLOGY

BKF2423 HEAT TRANSFER

BKF3142 PROCESS

ENGINEERING ECONOMICS

UGE2002

TECHNOPRE NEURSHIP

BKC4913 PROCESS & PLANT

DESIGN I

BKC4**3 ELECTIVE 3

BKF1253 PHYSICAL

CHEMISTRY

BKF1243 ANALYTICAL CHEMISTRY

BKF2413 CHEMICAL

ENGINEERING THERMODYNAMICS

BKF2432 MASS TRANSFER

BKC3533 OSH IN

CHEMICAL INDUSTRIES

BKF3472

CHEMICAL REACTION

ENGINEERING II

BKC4543 ENVIRONMENTAL

ENGINEERING

BKF4812 PROCESS

ENGINEERING MANAGEMENT

BKF1323 ORGANIC

CHEMISTRY

BKF1313 ENGINEERING MECHANICS

BKF2353 FLUID MECHANICS

BKF2443 NUMERICAL METHODS &

OPTIMIZATION

BKF3463 UNIT

OPERATION

BKF3731

UNIT OPERATION

LAB

BKC4944

UNDERGRADUATE RESEARCH PROJECT II

BKF1513 ENGINEERING

ETHICS & PROFESSIONALISM

BKF1333 THERMODYNAMICS

BKF2343 MATERIAL &

ENERGY BALANCE

BKC2363 SCIENCE &


BKF3413 PROCESS

CONTROL & DYNAMIC

BKC3**3

ELECTIVE 1

BKF1751 BASIC SCIENCE & ENGINEERING LAB

BKF2453 CHEMICAL REACTION

ENGINEERING I

BKC3492 SEPARATION

PROCESS

BKC3922 UNDER

GRADUATE RESEARCH PROJECT I


ENGINEERING LAB

BKF3791 PROCESS

CONTROL & INSTRUMEN TATION LAB

BKF3553

PROCESS SIMULATION

AND COMPUTER

AIDED DESIGN

TOTAL CREDIT PER SEMESTER

16 15 16 19 17 16 6 15 10

OVERALL TOTAL CREDIT FOR GRADUATION

130


63



BACHELOR OF CHEMICAL ENGINEERING (HONOURS)


BK

F491

6 - I

ND

UST

RIA

L TR

AIN

ING

(LI)

12 W

EEK

S

FOURTH


CO

UR

SES

UHL2412 ENGLISH FOR


UHL2422 ENGLISH FOR



CIVILISATIONS 1

UHL2432 ENGLISH FOR


UHM2022 ETHNIC

RELATIONS

UHF11*1 FOREIGN

LANGUAGES LEVEL 1


BKC4934 PROCESS &

PLANT DESIGN II

UQB1**1 CO-CURRICULUM I


BUM2413 APPLIED

STATISTICS

BKF2143 COMPUTER


UQ*2**1 CO-

CURRICULUM II

UHS 2021

SOFT SKILLS 2 BKC 3**3 ELECTIVE 2

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

BUM2133 ORDINARY



BKF2332 ELECTRICAL &

INSTRUMENTATION TECHNOLOGY

BKF2423 HEAT TRANSFER

BKF3142 PROCESS

ENGINEERING ECONOMICS

UGE2002

TECHNOPRE NEURSHIP

BKC4913 PROCESS & PLANT

DESIGN I

BKC4**3 ELECTIVE 3

BKF1253 PHYSICAL

CHEMISTRY

BKF1243 ANALYTICAL CHEMISTRY

BKF2413 CHEMICAL

ENGINEERING THERMODYNAMICS

BKF2432 MASS TRANSFER

BKC3533 OSH IN

CHEMICAL INDUSTRIES

BKF3472

CHEMICAL REACTION

ENGINEERING II

BKC4543 ENVIRONMENTAL

ENGINEERING

BKF4812 PROCESS

ENGINEERING MANAGEMENT

BKF1323 ORGANIC

CHEMISTRY

BKF1313 ENGINEERING MECHANICS

BKF2353 FLUID MECHANICS

BKF2443 NUMERICAL METHODS &

OPTIMIZATION

BKF3463 UNIT

OPERATION

BKF3731

UNIT OPERATION

LAB

BKC4944

UNDERGRADUATE RESEARCH PROJECT II

BKF1513 ENGINEERING

ETHICS & PROFESSIONALISM

BKF1333 THERMODYNAMICS

BKF2343 MATERIAL &

ENERGY BALANCE

BKC2363 SCIENCE &


BKF3413 PROCESS

CONTROL & DYNAMIC

BKC3**3

ELECTIVE 1

BKF1751 BASIC SCIENCE & ENGINEERING LAB


ENGINEERING I

BKC3492 SEPARATION

PROCESS

BKC3922 UNDER

GRADUATE RESEARCH PROJECT I


ENGINEERING LAB

BKF3791 PROCESS

CONTROL & INSTRUMEN TATION LAB

BKF3553

PROCESS SIMULATION

AND COMPUTER

AIDED DESIGN

TOTAL CREDIT PER SEMESTER

16 15 16 19 17 16 6 15 10


130

ELECTIVE COURSES FOR BACHELOR OF CHEMICAL ENGINEERING (HONOURS)

NO CODE COURSE CREDIT HOUR

1 BKB3363 SCIENCE & ENGINEERING MATERIALS ('E) 3

2 BKB3423 BIOREACTOR ENGINEERING 3

3 BKB4493 BIOSEPARATION ENGINEERING 3

4 BKB2132 MOLECULAR & CELL BIOLOGY 2

5 BKB2412 INDUSTRIAL BIOTECHNOLOGY 2

6 BKB3781 BIOSEPERATION ENGINEERING LAB 1

7 BKC3653 MEMBRANCE TECHNOLOGY (E) 3

8 BKC3683 WASTEWATER TREATMENT ( E) 3

9 BKC3693 ELECTROCHEMICAL ENGINEERING ('E) 3

10 BKC3833 RECYCLING TECHNOLOGY (E) 3

11 BKC3853 PROCESS MONITORING (E ) 3

12 BKC3883 PROCESS INTEGRATION ('E) 3

13 BKC3893 SCALE-UP OF CHEMICAL PROCESS ('E) 3

14 BKC4613 ADVANCED SEPARATION SYSTEM (E) 3

15 BKC4633 POLYMER DESIGN TECHNOLOGY (E) 3

16 BKC4653 POLYMER TECHNOLOGY (E) 3

17 BKC4663 ULTRASONICS ('E) 3

18 BKC4683 FOOD ENGINEERING (E) 3

17 BKG4463 GAS STORAGE & RETICULATION (E) 3

18 BKG3413 COMBUSTION & GAS UTILIZATION ('E) 3

19 BKG3453 GAS PROCESSING & LIQUEFACTION 3

20 BKG3412 OIL & GAS PRODUCTION SYSTEM 2

21 BKG4731 GAS TECHNOLOGY LAB 1

22 BKG3433 GAS TRANSMISSION & DISTRIBUTION 3



64



DIPLOMA IN CHEMICAL ENGINEERING (PROCESS PLANT)

YEAR PRELIMINARY

SHORT SEMESTER

FIRST SECOND THIRD

SEMESTER

(0) FIRST SECOND FIRST SECOND FIRST

CO

UR

SES

UHL1412 FOUNDATION

ENGLISH

UHR1012 ISLAMIC AND

ASIAN CIVILISATIONS 1

UHL1432 ENGLISH FOR


UGE1002 ASAS


DKK2373 FLUID MECHANICS

DKK3919 INDUSTRIAL

TRAINING

DUM1113 BASIC

MATHEMATICS

UHL1422 ENGLISH FOR

ACADEMIC SKILLS



DKK2462 PLANT

COMMISSIONING & START-UP

DKK3933 INDUSTRIAL

TRAINING REPORT

UQB1**1 CO-

CURRICULUM I

DUK1113 GENERAL

CHEMISTRY I

DUM1123 CALCULUS

DKK2333 THERMODYNAMICS

DKK2473 PLANT SAFETY &

HEALTH

DUF1113 PHYSICS

DUK1123 GENERAL CHEMISTRY

II

DKK2433 CHEMICAL REACTION

ENGINEERING

DKK2483 PLANT UTILITY


DKK1413 MATERIAL & ENERGY

BALANCE

DKK2363 ENGINEERING MECHANICS

DKK2443 PROCESS

INSTRUMENTATION & CONTROL

DKK1352 ELECTRICAL

TECHNOLOGY

DKK1493 TRANSPORT PROCESSES

DKK2771 CHEMICAL

REACTION LAB

DKK2464 UNIT OPERATIONS

DKK1781 BASIC SCIENCE & ENGINEERING

LAB

DKK1761 MASS AND HEAT TRANSFER LAB

DKK2142 PLANT

SUPERVISION

DKK1524 COMPUTER

APPLICATION & ENGINEERING

GRAPHICS

DKK1771 ANALYTICAL

INSTRUMENTAL LAB

DKK2523 ENVIRONMENTAL

ENGINEERING

TOTAL CREDIT PER SEMESTER 6 18 17 19 18 12


90


65



DIPLOMA IN CHEMICAL ENGINEERING (PROCESS PLANT)

YEAR PRELIMINARY

SHORT SEMESTER

FIRST SECOND THIRD

SEMESTER

(0) FIRST SECOND FIRST SECOND FIRST

CO

UR

SES

UHL1412 FOUNDATION

ENGLISH

UHR1012 ISLAMIC AND


UHL1432 ENGLISH FOR


UGE1002 ASAS


DKK2373 FLUID MECHANICS

DKK3919 INDUSTRIAL

TRAINING

DUM1113 BASIC

MATHEMATICS

UHL1422 ENGLISH FOR

ACADEMIC SKILLS



DKK2462 PLANT

COMMISSIONING & START-UP

DKK3933 INDUSTRIAL

TRAINING REPORT

UQB1**1 CO-

CURRICULUM I

DUK1113 GENERAL

CHEMISTRY I

DUM1123 CALCULUS

DKK2333 THERMODYNAMICS

DKK2473 PLANT SAFETY &

HEALTH

DUF1113 PHYSICS

DUK1123 GENERAL CHEMISTRY

II

DKK2433 CHEMICAL REACTION

ENGINEERING

DKK2483 PLANT UTILITY


DKK1413 MATERIAL & ENERGY

BALANCE

DKK2363 ENGINEERING MECHANICS

DKK2443 PROCESS

INSTRUMENTATION & CONTROL

DKK1352 ELECTRICAL

TECHNOLOGY

DKK1493 TRANSPORT PROCESSES

DKK2771 CHEMICAL

REACTION LAB

DKK2464 UNIT OPERATIONS

DKK1781 BASIC SCIENCE & ENGINEERING

LAB

DKK1761 MASS AND HEAT TRANSFER LAB

DKK2142 PLANT

SUPERVISION

DKK1524 COMPUTER

APPLICATION & ENGINEERING

GRAPHICS

DKK1771 ANALYTICAL

INSTRUMENTAL LAB

DKK2523 ENVIRONMENTAL

ENGINEERING

TOTAL CREDIT PER SEMESTER 6 18 17 19 18 12


90

FACULTY OF COMPUTER SYSTEMS & SOFTWARE

ENGINEERING


66


FACULTY OF COMPUTER SYSTEMS & SOFTWARE ENGINEERING

INTRODUCTION

Faculty of Computer Systems & Software Engineering was established on 16 February 2002 to produce knowledgeable, high skilled and competitive graduates within the sphere of software engineering, system and computer network. At the beginning, the faculty had two fields which are Software Engineering and Networking.

The faculty has also embarked on research and development activities in the area such as information systems, software engineering, computer systems, communication systems, graphic and multimedia technology to produce technologies that are relevant to the needs of industries. Currently, the faculty has four research groups which are Network & Security, Modeling & Simulation, Data Mining & Knowledge Management and Graphic & Image Processing to support university’s focus groups (Manufacturing & Automotive and Chemical & Biotechnology). The faculty emphasizes on the development and growth of its students’ enrolment and graduates. Through high quality teaching (by completing specific quality outcome and generic skills), great laboratories facilities, proper and careful advising and numerous professional activities, our students have opportunity to excel in the classroom and laboratory session. In a personable atmosphere, the students become well prepared in the term of software engineering knowledge and technical skills. Thus, they are ready and confident to begin their professional career or further their studies.

The faculty’s current planning is to be an ICT reference centre in Pahang to support the development of East Coast Economic Region (ECER), Malaysia. To realize this, many activities which involve industries and government sectors have been carried out.

PROGRAMS OFFERED

• Bachelor of Computer Science (Software Engineering)• Bachelor of Computer Science (Computer Systems & Networking)• Bachelor of Computer Science (Graphics & Multimedia Technology)• Diploma in Computer Science


• Diploma in Computer Science• Assistant Software Engineer• Computer Programmer• Web Application Developer• Assistant Information Developer• Computer System Analyst• Assistant IT Manager• Technical Consultant• Computer Application Developer• Sales & Marketing• Technoprenuer


67


Bachelor of Computer Science (Software Engineering)

• Software Quality Engineer• System Analyst• System Administrator• Information System Officer• Solutions Architect• System Specialist• Database Administrator• Research Engineer• Consultant• Marketing Executive• Technoprenuer

Bachelor of Computer Science (Computer Systems & Networking)

• Computer Systems & Network Engineer• System Analyst• Network Administrator• Information System Officer• Server Administrator• Information System Officer• System & Network Analyst• Research Engineer• Consultant• Marketing Executive• Technoprenuer

Bachelor of Computer Science (Graphics & Multimedia Technology)

• Computer Graphic & Multimedia Programmer• System Analyst• Web Designer• Information System Officer• 3D Programmer• Game Developer• Multimedia Developer• Research Engineer• Consultant• Marketing Executive• Technoprenuer


68


FACULTY OF COMPUTER SYSTEM AND SOFTWARE ENGINEERING CURRICULUM STRUCTURE

BACHELOR OF COMPUTER SCIENCE (COMPUTER SYSTEMS & NETWORKING) WITH HONOURS



CO

UR

SES

BCC1032 APPLICATION

DEVELOPMENT WORKSHOP

BCN1043 COMPUTER

ARHITECTURE AND ORGANIZATION

BCS2143 OBJECT

ORIENTED PROGRAMMING

BC****3 ELECTIVE BCN1

BCN2093 NETWORK ANALYSIS

AND DESIGN

BC****3 ELECTIVE BCN 3

BCN3133 COMPUTER

ETHICS & POLICIES

BCC4024 INDUSTRIAL

TRAINING REPORT

BCS1023 PROGRAMMING

TECHNIQUES

BCN1053 DATA

COMMUNICATION AND NETWORKING

BCN2053 OPERATING

SYSTEMS

BCI2023 DATABASE SYSTEMS

BCN3123 DISTRIBUTED

SYSTEMS

BCN3183 INTERNET

TECHNOLOGY

BCN3023 NETWORK

MANAGEMENT

BCC4018 INDUSTRIAL

TRAINING

BCC1012 ICT

COMPETENCY WORKSHOP

BCS1093 DATA STRUCTURE AND ALGORITHMS

UHL2312 TECHNICAL

ENGLISH

BCS1133 SYSTEMS

ANALYSIS AND DESIGN

BCN2023 DATA AND NETWORK SECURITY

BCN3203 WAN

TECHNOLOGY

BCC3026 UNDER

GRADUATE PROJECT II

BCN1052 LOCAL AREA

NETWORK WORKSHOP

BCS1133 SYSTEMS

ANALYSIS & DESIGN

UHF11*1 FOREIGN

LANGUAGE LEVEL 1

BCN2193 NETWORK

TECHNOLOGIES

BCN2083 COMPUTER NETWORKS

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

B*C*3 ELECTIVE IV

BUM1213 FUNDAMENTAL

DISCRETE STUCTURE


CIVILISATIONS 1


BCS2303 WEB SCRIPTING

BCC3013 UNDER

GRADUATE PROJECT 1

UGE2002 TECHNOPRE

NEURSHIP

UQB1**1 CO-

CURRICULUM 1

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

UQ*2**1 CO-

CURRICULUM II

UHL2322 TECHNICAL

WRITING

UHS2021 SOFT SKILLS

2


UHL2400 FUNDAMENTALS OF

ENGLISH LANGUAGE


UHM2022 ETHNIC

RELATIONS

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

BUM2413 APPLIED

STATISTICS

UCS1110 FIRST YEAR

SEMINAR

TOTAL CREDIT 16 15 18 17 16 12 15 12

TOTAL CREDIT FOR

GRADUATION 122


69



BACHELOR OF COMPUTER SCIENCE (COMPUTER SYSTEMS & NETWORKING) WITH HONOURS



CO

UR

SES

BCC1032 APPLICATION


BCN1043 COMPUTER

ARHITECTURE AND ORGANIZATION

BCS2143 OBJECT


BC****3 ELECTIVE BCN1

BCN2093 NETWORK ANALYSIS

AND DESIGN

BC****3 ELECTIVE BCN 3

BCN3133 COMPUTER

ETHICS & POLICIES

BCC4024 INDUSTRIAL

TRAINING REPORT

BCS1023 PROGRAMMING

TECHNIQUES

BCN1053 DATA

COMMUNICATION AND NETWORKING

BCN2053 OPERATING

SYSTEMS


BCN3123 DISTRIBUTED

SYSTEMS

BCN3183 INTERNET

TECHNOLOGY

BCN3023 NETWORK

MANAGEMENT

BCC4018 INDUSTRIAL

TRAINING

BCC1012 ICT

COMPETENCY WORKSHOP

BCS1093 DATA STRUCTURE AND ALGORITHMS

UHL2312 TECHNICAL

ENGLISH

BCS1133 SYSTEMS

ANALYSIS AND DESIGN

BCN2023 DATA AND NETWORK SECURITY

BCN3203 WAN

TECHNOLOGY

BCC3026 UNDER

GRADUATE PROJECT II

BCN1052 LOCAL AREA

NETWORK WORKSHOP

BCS1133 SYSTEMS

ANALYSIS & DESIGN

UHF11*1 FOREIGN

LANGUAGE LEVEL 1

BCN2193 NETWORK

TECHNOLOGIES

BCN2083 COMPUTER NETWORKS

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

B*C*3 ELECTIVE IV

BUM1213 FUNDAMENTAL

DISCRETE STUCTURE


CIVILISATIONS 1



BCC3013 UNDER

GRADUATE PROJECT 1

UGE2002 TECHNOPRE

NEURSHIP

UQB1**1 CO-

CURRICULUM 1

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

UQ*2**1 CO-

CURRICULUM II

UHL2322 TECHNICAL

WRITING

UHS2021 SOFT SKILLS

2


UHL2400 FUNDAMENTALS OF

ENGLISH LANGUAGE


UHM2022 ETHNIC

RELATIONS

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

BUM2413 APPLIED

STATISTICS

UCS1110 FIRST YEAR

SEMINAR

TOTAL CREDIT 16 15 18 17 16 12 15 12

TOTAL CREDIT FOR

GRADUATION 122


BACHELOR OF COMPUTER SCIENCE (SOFTWARE ENGINEERING) WITH HONOURS



CO

UR

SES

BCS1023 PROGRAMMING

TECHNIQUES

BCN1043 COMPUTER

ARCHITECTURE & ORGANIZATION


BCN2053 OPERATING

SYSTEMS

BC****3 ELECTIVE BCS

BCS1*23 ELECTIVE BCS 2

B**C*3 ELECTIVE IV

BCC4024 INDUSTRIAL

TRAINING REPORT

BCS2283 INRODUCTION TO

SOFTWARE ENGINEERING

BCS1093 DATA STRUCTURE

& ALGORITHMS

BCS2143 OBJECT ORIENTED

PROGRAMMING

BCS2173 HUMAN COMPUTER

INTERACTION

BCS2313 ARTIFICIAL

INTELLIGENCE TECHNIQUES

BCS2213 FORMAL METHOD

BCS1*33 ELECTIVE

BCS 3

BCC4018 INDUSTRIAL

TRAINING

BCC1032 APPLICATION


BCN1053 DATA

COMMUNICATION & NETWORKING

BCS2333 SOFTWARE PLANNING &

REQUIREMENT WORKSHOP

BCS2343 SOFTWARE DESIGN

WORKSHOP

BCS3293 SOFTWARE

CONFIGURATION MANAGEMENT

BCS3323 SOFTWARE TESTING &

MAINTENANCE

BCC3026 UNDER

GRADUATE PROJECT II

BCN1053 DATA


BCC1012 ICT COMPETENCY

WORKSHOP


BCS2203 WEB APPLICATION

DEVELOPMENT

BUM2413 APPLIED

STATISTICS

BCC3013 UNDER

GRADUATE PROJECT 1

BCS3263 SOFTWARE

QUALITY ASSURANCE

BUM1213 FUNDAMENTAL

DISCRETE STRUCTURE

BCS1133 SYSTEMS

ANALYSIS DESIGN

BUM2223 DISCRETE

STRUCTURE & APPLICATION

UHF11*1 FOREIGN

LANGUAGE LEVEL 1

UGE2002 TECHNOPRE

NEURSHIP

UHF21*1 FOREIGN

LANGUAGES LEVEL 2


CIVILSATIONS 1


UHL2422 ENGLISH FOR


UHL2432 ENGLISH FOR




UHL2412 ENGLISH FOR


UQ*2**1 CO-CURRICULUM II


UQB1**1 CO- CURRICULUM 1

UHL2400 FUNDAMENTAL OF

ENGLISH LANGUAGE

UCS1110 FIRST YEAR

SEMINAR

TOTAL CREDIT 18 18 18 15 14 16 15 12

TOTAL CREDIT FOR

GRADUATION 123


70


FACULTY OF COMPUTER SYSTEM AND SOFTWARE ENGINEERING

CURRICULUM STRUCTURE BACHELOR OF COMPUTER SCIENCE (GRAPHICS) WITH HONOURS



CO

UR

SES

BCS1023 PROGRAMMING

TECHNIQUES


& ALGORITHMS


PROGRAMMING

BCS2313 ARTIFICIAL

INTELLIGENT

BC****3 ELECTIVE 1

BC****3 ELECTIVE 2

BC****3 ELECTIVE 3

BCC4018 INDUSTRIAL

TRAINING

BCN1043 COMPUTER

ARCHITECTURE &

ORGANIZATION

BCN1053 DATA


BCM2053 COMPUTER

GRAPHIC

BCM2073 MODELING & SIMULATION

BCM3123 DATA

VISUALIZATION

BCS2173 HUMAN

COMPUTER INTERACTION

BC****3 ELECTIVE 4

BCC4024 INDUSTRIAL

TRAINING REPORT

BCC1012 ICT

COMPETENCY WORKSHOP


BCS1133 SYSTEM ANALYSIS

& DESIGN

BCM3113 3D MODELING

BCM3103 VIRTUAL REALITY

BCC3013 UNDER

GRADUATE PROJECT 1

BCS3026 UNDER

GRADUATE PROJECT II

BCC1032 APPLICATION


BCM2043 MULTIMEDIA

TECHNOLOGY & APPLICATION

BCN2053 OPERATING

SYSTEM


BCM2063 IMAGE

PROCESSING

BCM3183 MULTIMEDIA INTERACTIVE

DEVELOPMENT

ELECTIVE COURSE

UHL2400 FUNDAMENTAL

OF ENGLISH LANGUAGE

UHL2412 ENGLISH FOR


UHL2422 ENGLISH FOR


UHL2432 ENGLISH FOR


UHF11*1 FOREIGN

LANGUAGE 1

UHF21*1 FOREIGN

LANGUAGE 2

UHS2011 SOFT SKILL 2

BUM1213 FUNDAMENTAL

DISCRETE STRUCTURE


CIVILIZATION

BUM2223 DISCRETE


UHM2022 ETHNIC

RELATIONSHIP

BUM2413 APPLIED

STATISTIC

UGE2002 TECHNOPRE

NEURSHIP

UQB***1 CO-

CURRICULUM

UHS1011 SOFT SKILL 1 UQ*2***1

CO-CURRICULUM 2

TOTAL CREDIT 14 17 17 16 16 15 16 12

TOTAL CREDIT FOR

GRADUATION 123


71


FACULTY OF COMPUTER SYSTEM AND SOFTWARE ENGINEERING

CURRICULUM STRUCTURE BACHELOR OF COMPUTER SCIENCE (GRAPHICS) WITH HONOURS



CO

UR

SES

BCS1023 PROGRAMMING

TECHNIQUES


& ALGORITHMS


PROGRAMMING

BCS2313 ARTIFICIAL

INTELLIGENT

BC****3 ELECTIVE 1

BC****3 ELECTIVE 2

BC****3 ELECTIVE 3

BCC4018 INDUSTRIAL

TRAINING

BCN1043 COMPUTER

ARCHITECTURE &

ORGANIZATION

BCN1053 DATA


BCM2053 COMPUTER

GRAPHIC

BCM2073 MODELING & SIMULATION

BCM3123 DATA

VISUALIZATION

BCS2173 HUMAN

COMPUTER INTERACTION

BC****3 ELECTIVE 4

BCC4024 INDUSTRIAL

TRAINING REPORT

BCC1012 ICT

COMPETENCY WORKSHOP


BCS1133 SYSTEM ANALYSIS

& DESIGN

BCM3113 3D MODELING

BCM3103 VIRTUAL REALITY

BCC3013 UNDER

GRADUATE PROJECT 1

BCS3026 UNDER

GRADUATE PROJECT II

BCC1032 APPLICATION


BCM2043 MULTIMEDIA

TECHNOLOGY & APPLICATION

BCN2053 OPERATING

SYSTEM


BCM2063 IMAGE

PROCESSING

BCM3183 MULTIMEDIA INTERACTIVE

DEVELOPMENT

ELECTIVE COURSE

UHL2400 FUNDAMENTAL

OF ENGLISH LANGUAGE

UHL2412 ENGLISH FOR


UHL2422 ENGLISH FOR


UHL2432 ENGLISH FOR


UHF11*1 FOREIGN

LANGUAGE 1

UHF21*1 FOREIGN

LANGUAGE 2

UHS2011 SOFT SKILL 2

BUM1213 FUNDAMENTAL

DISCRETE STRUCTURE


CIVILIZATION

BUM2223 DISCRETE


UHM2022 ETHNIC

RELATIONSHIP

BUM2413 APPLIED

STATISTIC

UGE2002 TECHNOPRE

NEURSHIP

UQB***1 CO-

CURRICULUM

UHS1011 SOFT SKILL 1 UQ*2***1

CO-CURRICULUM 2

TOTAL CREDIT 14 17 17 16 16 15 16 12

TOTAL CREDIT FOR

GRADUATION 123

ELECTIVE COURSES FOR BACHELOR OF COMPUTER SCIENCE (COMPUTER SYSTEMS &

NETWORKING) WITH HONOURS


1 BCN2023 DATA & NETWORK SECURITY 3

2 BCN3113 ETHICAL HACKING 3

3 BCS2173 HUMAN COMPUTER INTERACTION 3

4 BCM3013 VIRTUAL REALITY 3


ELECTIVE COURSES FOR BACHELOR OF COMPUTER SCIENCE (SOFTWARE ENGINEERING)

WITH HONOURS


1 BCM2063 IMAGE PROCESSING 3

2 BCN2183 INTERNET TECHNOLOGY 3

3 BCN3123 DISTRIBUTED SYSTEM 3

4 BCS3113 ZENP PHP FOUNDATION 3


ELECTIVE COURSES FOR BACHELOR OF COMPUTER SCIENCE (GRAPHICS) WITH HONOURS


1 BCM3123 DATA VISUALIZATION 3

2 BCN2183 INTERNET TECHNOLOGY 3

3 BCN3133 COMPUTER ETHICS AND POLICIES 3

4 BCS3113 ZENP PHP FOUNDATION 3



72



DIPLOMA IN COMPUTER SCIENCE

YEAR SHORT SEMESTER FIRST SECOND THIRD

SEMESTER FIRST SECOND FIRST SECOND FIRST SECOND

CO

UR

SES

UQB1011

BRIGED SISWA (KOKURIKULUM)

DUM1113 BASIC

MATHEMATICS

DCM2013 GRAPHICAL

USER INTERFACE

DCS2103 DATA STRUCTURE &

ALGORITHM

DCS2143 WEB

PROGRAMMING

DCC3068 INDUSTRIAL

TRAINING

UHL1412

FOUNDATION ENGLISH

DCC1022 ICT COMPETENCY

WORKSHOP

DUM1213 FUNDAMENTAL

DISCRETE STRUCTURE

DC****3 ELECTIVE I

DUM2413 STATISTIC & PROBABILITY

DCC3084 WEB

PROGRAMMING


DCS1072 PROBLEM SOLVING

DCN1053 DATA

COMMUNICATION &

NETWORKING

DCI2033 DATABASE SYSTEM

DCS2133 OBJECT


DCI1012

INTRODUCTION TO IT

DCS1053 PROGRAMING TECHNIQUES

DUM1123 CALCULUS

DC****3 ELECTIVE II

DCC1032 APPLICATION


DCN2063 OPERATING

SYSTEMS

DCN2072 LOCAL AREA

NETWORK WORKSHOP

DCC3016 FINAL YEAR

PROJECT

DCN1013 COMPUTER


UGE1002 ASAS


DCS1093 SYSTEMS ANALYSIS

DESIGN


UHR1012 ISLAMIC AND


UHM2022 HUBUNGAN

ETNIK

UHL1432 ENGLISH FOR


UHL1422

ENGLISH FOR ACADEMIC SKILLS

TOTAL CREDIT 4 18 19 19 19 12

TOTAL CREDIT FOR

GRADUATION 91


73



DIPLOMA IN COMPUTER SCIENCE

YEAR SHORT SEMESTER FIRST SECOND THIRD

SEMESTER FIRST SECOND FIRST SECOND FIRST SECOND

CO

UR

SES

UQB1011

BRIGED SISWA (KOKURIKULUM)

DUM1113 BASIC

MATHEMATICS

DCM2013 GRAPHICAL

USER INTERFACE

DCS2103 DATA STRUCTURE &

ALGORITHM

DCS2143 WEB

PROGRAMMING

DCC3068 INDUSTRIAL

TRAINING

UHL1412

FOUNDATION ENGLISH

DCC1022 ICT COMPETENCY

WORKSHOP

DUM1213 FUNDAMENTAL

DISCRETE STRUCTURE

DC****3 ELECTIVE I

DUM2413 STATISTIC & PROBABILITY

DCC3084 WEB

PROGRAMMING


DCS1072 PROBLEM SOLVING

DCN1053 DATA

COMMUNICATION &

NETWORKING

DCI2033 DATABASE SYSTEM

DCS2133 OBJECT


DCI1012

INTRODUCTION TO IT

DCS1053 PROGRAMING TECHNIQUES

DUM1123 CALCULUS

DC****3 ELECTIVE II

DCC1032 APPLICATION


DCN2063 OPERATING

SYSTEMS

DCN2072 LOCAL AREA

NETWORK WORKSHOP

DCC3016 FINAL YEAR

PROJECT

DCN1013 COMPUTER


UGE1002 ASAS


DCS1093 SYSTEMS ANALYSIS

DESIGN


UHR1012 ISLAMIC AND


UHM2022 HUBUNGAN

ETNIK

UHL1432 ENGLISH FOR


UHL1422

ENGLISH FOR ACADEMIC SKILLS

TOTAL CREDIT 4 18 19 19 19 12

TOTAL CREDIT FOR

GRADUATION 91

ELECTIVE COURSES FOR DIPLOMA IN COMPUTER SCIENCE


1 DCN2033 DATA & NETWORK SECURITY 3

2 DCM2033 MULTIMEDIA TECHNOLOGY & APPLICATION 3



74


FACULTY OF ENGINEERING TECHNOLOGY


75



INTRODUCTION

Faculty of EngineeringTechnology was established in 2014. The aim of the estasblishment is to support local and global economic development through education, research, commercialization and consultation in the field of engineering technology.

All our academic programmes are accredited by Malaysian Qualifications Agency (MQA) and recog-nized by numerous universities locally and internationally. We also offers dual degree programmes with renowned universities across the globe to enhance the marketability of our future graduates. We collaborated with Northern Illinois University from United States of America for three programs namely electrical, manufacturing and energy & environmental.

Our main objectives are to offer engineering technology programs that meet the needs of industry and the nation, to produce graduates who are competent and highly skilled who are recognized by the local and international professional bodies, to collaborate with local and international industry to further improve technology and professional services and to lead initiatives in the field of research related to the industry.

PROGRAMMES OFFERED

§ Bachelor of Occupational Safety and Health with Honors§ Bachelor of Engineering Technology (Electrical) with Honors§ Bachelor of Engineering Technology (Manufacturing) with Honors§ Bachelor of Engineering Technology (Energy and Environmental) with Honors§ Bachelor of Engineering Technology (Pharmaceutical) with Honors§ Bachelor of Engineering Technology (Infrastructure Management) with Honors


§ Occupational Safety & Health - Graduates from this programme will be able to undertake roles in the workplace as HSE Consultant, Safety and Health Officer, HSE Coordinator, Safety and Health, Supervisor, Lecturer and Trainer or Hygienist.

§ Manufacturing - Graduates from this programme will be able to undertake roles in the workplace as engineering technologists in automotive, robotic engineering, material processing, and machining industries

§ Electrical - Graduates from this programme will be able to undertake roles in the workplace as Electrical Engineering Technologist; Operation/Production; Technical Management and Operations; Sales/Procurement; Product/system Design, Development and Testing; Systems engineering; Field engineering; Quality control; and Technical management. They are capable of accommodating a wide range of industries such as electrical and electronics, electrical power distribution, telecommunications, transportation, computers, process control and manufacturing.


76


§ Energy & Environmental - Graduates from this programme will be able to undertake roles in the workplace as Energy System Designers, Energy System Auditors or Consultants as well as System Developers and Operators.

§ Pharmaceutical - Graduates from this programme will be able to undertake roles in the workplace in validation & quality control, regulatory affairs, manufacturing/production, quality compliance (good manufacturing practices, product registration & regulatory requirements), research & development, facilities technology in pharmaceutical industry.

§ Infrastructure Management - Graduates from this programme will be able to undertake roles in the workplace as Infrastructure, Building, Facilities and Construction Manager, Construction Technologist in the construction industry through the various infrastructure agencies, local and other government authorities, councils, ministries, firms and consulting companies


77


FACULTY OF ENGINEERING TECHNOLOGY CURRICULUM STRUCTURE

BACHELOR OF ENGINEERING TECHNOLOGY (ELECTRICAL) WITH HONOURS

*THE NUMBER IN A ( ) ARE REPRESENTING A CREDIT.



CO

UR

SES

BTU 1113 PHYSIC

(3)


CIVILIZATIONS (2)

BTM1113 BASIC


(3)

BTM3234 MANUFACTURING

COMPUTER APPLICATIONS

(4)

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

(1)

BTM3343 COMPUTER

INTEGRATED MANUFACTURING

(3)

BTE4713 ELECTIVE 1

PROGRAMMABLE LOGIC

CONTROLLER (3)

BTE4919 INDUSTRIAL

TRAINING (9)

BTU1112 PHYSICS

LABORATORY (2)

BTE2313 COMPUTER

PROGRAMMING (3)

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

(1)

BTE2213 ELECTRONICS I

(3)

BTE2413 ELECTRICAL

POWER SYSTEM (3)

BTM3342 COMPUTER


LABORATORY (2)

BTE4723 ELECTIVE 2 ADVANCED

ELECTRONICS CIRCUITS

(3)

BTE4913 INDUSTRIAL

TRAINING REPORT

(3)

BTU1213 CHEMISTRY

(3)

BUM1223 CALCULUS

(3)

BUM2113 APPLIED

MATHEMATICS (3)

BTE3212 ELECTRONICS I LABORATORY

(2)

BTE3223 DIGITAL LOGIC

DESIGN (3)

BTE3254 MICRO

PROCESSORS AND INTERFACING

(4)

BTE4733 ELECTIVE 3 SENSORS

TECHNOLOGY (3)

BTU1212


(2)

BTE2123 ELECTRICAL

FUNDAMENTALS AND CIRCUIT ANALYSIS I

(3)

UHL2422 ENGLISH FOR


(2)


(1)

BTE3222 DIGITAL LOGIC

DESIGN LABORATORY

(2)

BTE3252 MICRO

PROCESSORS AND INTERFACING LABORATORY

(2)

BTE4826 ENGINEERING TECHNOLOGY

SENIOR DESIGN PROJECT II

(6)

BUM1113 TECHNICAL

MATHEMATICS (3)

BTE2122 ELECTRICAL

FUNDAMENTALS AND CIRCUIT ANALYSIS I

LABORATORY (2)

BTE2133 ELECTRICAL

FUNDAMENTALS AND CIRCUIT ANALYSIS II

(3)

UHS2021 SOFT-SKILLS 2

(1)

BTE3243 ELECTRONICS II (3)

BTE3323 CONTROL SYSTEMS

(3)

UHL2400 FUNDAMENTALS

OF ENGLISH LANGUAGE

(0)

UHL2412 ENGLISH FOR


(2)

BTE2132 ELECTRICAL

FUNDAMENTALS AND CIRCUIT ANALYSIS II

LABORATORY (2)

UHL2432 ENGLISH FOR


(2)

BTE3242 ELECTRONICS II

LABORATORY (2)

BTE3322 CONTROL SYSTEMS

LABORATORY (2)

BTE1113 ELECTRICITY

AND ELECTRONICS

FUNDAMENTALS (3)

UHM2012 ETHNICS RELATION

(2)


(1)

BTE3143 ELECTRIC

MACHINES AND TRANSFORMER

(3)

BTE3233 COMMUNICATION SYSTEM DESIGN

(3)

BTE3813 ENGINEERING TECHNOLOGY

SENIOR DESIGN PROJECT I

(3)

BTE1112 ELECTRICITY

AND ELECTRONICS

FUNDAMENTALS LABORATORY

(2)

UGE2002 TECHNOPRE

NEURSHIP (2)

BTM2314 COMPUTER AIDED

DESIGN (4)

BTE3143 ELECTRIC

MACHINES AND TRANSFORMER LABORATORY

(2)

BTE3232 COMMUNICATION SYSTEM DESIGN

LABORATORY (2)

UQB1**1 CO-

CURRICULUM 1 (1)

TOTAL CREDIT 19 19 19 18 19 19 15 12

TOTAL CREDIT FOR

GRADUATION 140


78


FACULTY OF FACULTY OF ENGINEERING TECHNOLOGY CURRICULUM STRUCTURE

BACHELOR OF ENGINEERING TECHNOLOGY (MANUFACTURING) WITH HONOURS




CO

UR

SES

BTU1113 PHYSIC

(3)

BTM1113 BASIC


(3)

BTE1113 ELECTRIC &

ELECTRONICS FUNDAMENTAL (3)

BTM2223 ENGINEERING

DYNAMICS (3)


MODELING (4)

BTM3813 ENGINEERING TECHNOLOGY


(3)

BTM4713 ELECTIVE 1

LEAN MANUFACTURING

SYSTEM (3)

BTE4919 INDUSTRIAL

TRAINING (9)

BTU1112 PHYSICS

LABORATORY (2)

BTM1112 BASIC

MANUFACTURING PROCESS LAB

(2)

BTE1112 ELECTRIC &

ELECTRONICS FUNDAMENTAL LABORATORY

(2)

BUM2423 STATISTICS WITH

TECHNOLOGY (3)


COMPUTER APPLICATION

(4)


COMPUTER DESIGN

(4)

BTM4723 ELECTIVE 2 ADVANCED

MANUFACTURING PROCESS

(3)

BTE4913 INDUSTRIAL

TRAINING REPORT

(3)

BTU1213 CHEMISTRY

(3)

BUM1223 CALCULUS

(3)

BUM2113 APPLIED

MATHEMATICS (3)

BTM2124 MACHINE

PRODUCTION PROCESS

(4)

BTM2234 FLUID POWER TECHNOLOGY

(4)

BTM3353 PROGRAMMABLE

LOGIC CONTROLLER (3)

BTM4733 ELECTIVE 3

(3)

BTU1212


(2)

BTM1213 ENGINEERING MECHANICS

(3)

BTM2424 STRENGTH OF

MATERIALS (4)


DESIGN (4)

BTM3343 COMPUTER


(3)

BTM3364 NUMERICAL CONTROL SYSTEMS

(4)



(6)

BUM1113 TECHNICAL

MATHEMATICS (3)


(1)

BTM2413 PROPERTIES OF

MATERIALS (3)

BTV3433 ENGINEERING

ECONOMY (3)

BTM3342 COMPUTER


LABORATORY (2)

BTV3413 INDUSTRIAL

QUALITY CONTROL (3)

BTM4514

AUTOMATED MANUFACTURING

SYSTEM (4)


OF ENGLISH LANGUAGE

(0)

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

(1)


(1)

UHL2432 ENGLISH FOR


(2)

UGE2002 TECHNO

PRENEURSHIP (2)

BTV3453 ENERGY AUDITING

(3)

UHR1012 ISLAMIC AND

ASIA CIVILIZATIONS 1

(2)

UHM2022 ETHNICS

RELATION (2)

UHL2432 ENGLISH FOR


(2)

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

(1)

UHL2412 ENGLISH FOR


(2)


(1)


1 (1)

TOTAL CREDIT 18 17 18 19 19 20 19 12

TOTAL CREDIT FOR

GRADUATION 142


79


FACULTY OF FACULTY OF ENGINEERING TECHNOLOGY CURRICULUM STRUCTURE

BACHELOR OF ENGINEERING TECHNOLOGY (MANUFACTURING) WITH HONOURS




CO

UR

SES

BTU1113 PHYSIC

(3)

BTM1113 BASIC


(3)

BTE1113 ELECTRIC &


BTM2223 ENGINEERING

DYNAMICS (3)


MODELING (4)



(3)

BTM4713 ELECTIVE 1

LEAN MANUFACTURING

SYSTEM (3)

BTE4919 INDUSTRIAL

TRAINING (9)

BTU1112 PHYSICS

LABORATORY (2)

BTM1112 BASIC

MANUFACTURING PROCESS LAB

(2)

BTE1112 ELECTRIC &


(2)


TECHNOLOGY (3)


COMPUTER APPLICATION

(4)


COMPUTER DESIGN

(4)

BTM4723 ELECTIVE 2 ADVANCED

MANUFACTURING PROCESS

(3)

BTE4913 INDUSTRIAL

TRAINING REPORT

(3)

BTU1213 CHEMISTRY

(3)

BUM1223 CALCULUS

(3)

BUM2113 APPLIED

MATHEMATICS (3)

BTM2124 MACHINE

PRODUCTION PROCESS

(4)


(4)

BTM3353 PROGRAMMABLE

LOGIC CONTROLLER (3)

BTM4733 ELECTIVE 3

(3)

BTU1212


(2)

BTM1213 ENGINEERING MECHANICS

(3)

BTM2424 STRENGTH OF

MATERIALS (4)


DESIGN (4)

BTM3343 COMPUTER


(3)

BTM3364 NUMERICAL CONTROL SYSTEMS

(4)



(6)

BUM1113 TECHNICAL

MATHEMATICS (3)


(1)

BTM2413 PROPERTIES OF

MATERIALS (3)

BTV3433 ENGINEERING

ECONOMY (3)

BTM3342 COMPUTER


LABORATORY (2)

BTV3413 INDUSTRIAL

QUALITY CONTROL (3)

BTM4514

AUTOMATED MANUFACTURING

SYSTEM (4)


OF ENGLISH LANGUAGE

(0)

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

(1)


(1)

UHL2432 ENGLISH FOR


(2)

UGE2002 TECHNO

PRENEURSHIP (2)

BTV3453 ENERGY AUDITING

(3)

UHR1012 ISLAMIC AND


(2)

UHM2022 ETHNICS

RELATION (2)

UHL2432 ENGLISH FOR


(2)

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

(1)

UHL2412 ENGLISH FOR


(2)


(1)


1 (1)

TOTAL CREDIT 18 17 18 19 19 20 19 12

TOTAL CREDIT FOR

GRADUATION 142


BACHELOR OF ENGINEERING TECHNOLOGY (ENERGY & ENVIRONMENTAL) WITH HONOURS




CO

UR

SES

BTU1113 PHYSIC

(3)

BTE1113 ELECTRIC &


BTM1113 BASIC


(3)

BTM2124 MACHINE

PRODUCTION PROCESS

(4)

BTV3413 INDUSTRIAL

QUALITY CONTROL (3)

BTV3813 ENGINEERING TECHNOLOGY


(3)

BTV4713 ELECTIVE 1

SOLAR ENERGY SYSTEM

(3)

BTE4919 INDUSTRIAL

TRAINING (9)

BTU1112 PHYSICS

LABORATORY (2)

BTE1112 ELECTRIC &


(2)


TECHNOLOGY (3)


(4)

BTV3424 FACILITIES

MANAGEMENT TECHNOLOGY

(4)

BTV3413 ENGINEERING

ECONOMY (3)

BTV4723 ELECTIVE 2 WATER AND

WASTEWATER MONITORING

(3)

BTE4913 INDUSTRIAL

TRAINING REPORT

(3)

BTU1213 CHEMISTRY

(3)

BUM1223 CALCULUS

(3)

BTV2113 POLLUTION,

PESTILENCE, PREVENTION AND COST OF DOING

BUSINESS (3)


COMPUTER DESIGN

(4)

BTV3324 DESIGN FOR

ENERGY EFFICIENCY AND

GREEN MATERIALS

(4)

BTV3433 DISASTER

PREPAREDNESS (3)

BTV4733 ELECTIVE 3

ENVIRONMENTAL MANAGEMENT

SYSTEM (3)

BTU1212


(2)


DESIGN (4)

BTV2213 THERMO

DYNAMICS (3)

UHM2022 ETHNICS RELATION

(2)

BTV3224 HEATING,

VENTILATING AND AIR

CONDITIONING TECHNOLOGY

(4)

BTV3453 ENERGY

AUDITING (3)

BTV4826 ENGINEERING TECHNOLOGY


(6)

BUM1113 TECHNICAL

MATHEMATICS (3)


(1)

BTV2123 ENVIRONMENTAL

LAWS, POLICY AND ECONOMICS (3)

BTV2314 GREEN

TECHNOLOGY (4)

BTV3333 BIOBASED FUELS AND

ALTERNATIVE ENERGY

APPLICATIONS (3)

BTV3714 ENERGY AND GEOGRAPHIC INFORMATION

SYSTEMS (4)

UHS2021

SOFT-SKILLS 2 (1)


OF ENGLISH LANGUAGE

(0)

UHL2412 ENGLISH FOR


(2)

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

(1)

UHL2422 ENGLISH FOR


(2)

UGE2002 TECHNO

PRENEURSHIP (2)

BTV3463 ENERGY

MANAGEMENT (3)

UHR1012 ISLAMIC AND


(2)

BTE2313 COMPUTER

PROGRAMMING (3)

UHL2432 ENGLISH FOR


(2)

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

(1)


(1)

UQB1**1 CO-

CURRICULUM 1 (1)

TOTAL CREDIT 18 18 18 20 20 19 16 12

TOTAL CREDIT FOR

GRADUATION 141


80



BACHELOR OF ENGINEERING TECHNOLOGY (PHARMACEUTICAL) WITH HONOURS




CO

UR

SES

BUM2133 ORDINARY


(3)

BTP2323 FLUID MECHANICS

(3)

BUM2413 APPLIED

STATISTICS (3)

UHL2432 ENGLISH FOR


(2)


(2)

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

(1)

BTP38*2 ELECTIVE 3

(2)

BTP4812 INDUSTRIAL

TRAINING (12)

UHL2400 ENGLISH FOR


(0)

BTP1613 INTRODUCTION TO PHARMACEUTICAL

SCIENCE (3)

BTP2632 GOOD

MANUFACTURING PRACTICES &

QUALITY ASSURANCE

(2)


(1)

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

(1)

UGE2002 TECHNO

PRENEURSHIP (2)

BTP4753 TECHNOLOGY

INNOVATION FOR PHARMACEUTICAL

ENGINEERING (3)

BTP1113 ORGANIC

CHEMISTRY (3)

BUM2123 APPLIED

CALCULUS (3)


(1)


(1)

BTP3243 PROCESS

BIOTECHNOLOGY TECHNIQUES

(3)

BTP3553 AUTOMATION

SYSTEMS (3)

BTP4173 PROCESS CONTROL

(3)

BTP1213

BIOLOGY FOR ENGINEERS

(3)

BTP2333 THERMO

DYNAMICS (3)

BTP2533 ELECTRICAL

POWER SYSTEMS (3)

BTP1623 MANUFACTURING &

PROCESSING TECHNOLOGY

(3)

BTP3163 PROCESS CHEM &

PHARMA ENGINEERING 2

(3)

BTP3652 CONTEMPORARY

TRENDS IN PHARMA INDUSTRY

(2)

BTP4663 SYSTEMS

VALIDATION (3)

BTP1712 COMPUTER

PROGRAMMING FOR ENGINEERS (2)

BTP2232 CONTAMINATION

CONTROL & CLEAN ROOM

(3)

BTP2223 PROTEIN

BIOCHEMISTRY & BIOTECHNOLOGY

(3)

BTP1143 ENVIRONMENTAL

TECHNOLOGY (ELECTIVE)

(3)

BTP3732 FACILITIES

MANAGEMENT SYSTEMS

(2)

BTP3742 TECHNOLOGY

TRANSFER (2)

BTP4678

PHARMACEUTICAL PROJECT

(8)

BTP1312 MATERIAL AND

PROCESS (2)

UHL2412 ENGLISH FOR


(2)

BTP1133 PROCESS

CHEMISTRY & PHARMACEUTICAL

ENGINEERING (3)

BTP2723 INDUSTRIAL NETWORKS

(3)

BTP3643 REGULATORY AFFAIRS AND

VALIDATION FOR ENGINEERS

(3)

BTP38*3 ELECTIVE 1

(3)

UHR1012 ISLAMIC AND ASIA CIVILIZATIONS 1

(2)

BTP2412 ELECTRICAL

FUNDAMENTALS (2)

UHL2422 ENGLISH FOR


(2)

BTP2543 CONTROL &

INSTRUMENTATION (3)

BTP3422 INDUSTRIAL

STATISTICS FOR PHARMACEUTICAL

ENGINEERS (2)

BTP38*3 ELECTIVE 2

(3)

BTP1513 ENGINEERING

SCIENCE (3)

BTP2412 NUMERICAL METHODS &

OPTIMIZATION (2)

BTP2513 PHARMACEUTICAL

FORMULATION METHODS

(3)

BTP4253 BIO AND PHARMA

ANALYTICAL TECHNIQUES

(3)

BTP3363 MANUFACTURING

SYSTEMS LEAN SIX SIGMA

(3)


(1)

TOTAL CREDIT 19 19 19 19 19 19 19 12

TOTAL CREDIT FOR

GRADUATION 145


81







CO

UR

SES

BUM2133 ORDINARY


(3)

BTP2323 FLUID MECHANICS

(3)

BUM2413 APPLIED

STATISTICS (3)

UHL2432 ENGLISH FOR


(2)


(2)

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

(1)

BTP38*2 ELECTIVE 3

(2)

BTP4812 INDUSTRIAL

TRAINING (12)

UHL2400 ENGLISH FOR


(0)

BTP1613 INTRODUCTION TO PHARMACEUTICAL

SCIENCE (3)

BTP2632 GOOD

MANUFACTURING PRACTICES &

QUALITY ASSURANCE

(2)


(1)

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

(1)

UGE2002 TECHNO

PRENEURSHIP (2)

BTP4753 TECHNOLOGY

INNOVATION FOR PHARMACEUTICAL

ENGINEERING (3)

BTP1113 ORGANIC

CHEMISTRY (3)

BUM2123 APPLIED

CALCULUS (3)


(1)


(1)

BTP3243 PROCESS

BIOTECHNOLOGY TECHNIQUES

(3)

BTP3553 AUTOMATION

SYSTEMS (3)

BTP4173 PROCESS CONTROL

(3)

BTP1213

BIOLOGY FOR ENGINEERS

(3)

BTP2333 THERMO

DYNAMICS (3)

BTP2533 ELECTRICAL

POWER SYSTEMS (3)

BTP1623 MANUFACTURING &

PROCESSING TECHNOLOGY

(3)

BTP3163 PROCESS CHEM &

PHARMA ENGINEERING 2

(3)

BTP3652 CONTEMPORARY

TRENDS IN PHARMA INDUSTRY

(2)

BTP4663 SYSTEMS

VALIDATION (3)

BTP1712 COMPUTER

PROGRAMMING FOR ENGINEERS (2)

BTP2232 CONTAMINATION

CONTROL & CLEAN ROOM

(3)

BTP2223 PROTEIN

BIOCHEMISTRY & BIOTECHNOLOGY

(3)

BTP1143 ENVIRONMENTAL

TECHNOLOGY (ELECTIVE)

(3)

BTP3732 FACILITIES

MANAGEMENT SYSTEMS

(2)

BTP3742 TECHNOLOGY

TRANSFER (2)

BTP4678

PHARMACEUTICAL PROJECT

(8)

BTP1312 MATERIAL AND

PROCESS (2)

UHL2412 ENGLISH FOR


(2)

BTP1133 PROCESS

CHEMISTRY & PHARMACEUTICAL

ENGINEERING (3)

BTP2723 INDUSTRIAL NETWORKS

(3)

BTP3643 REGULATORY AFFAIRS AND

VALIDATION FOR ENGINEERS

(3)

BTP38*3 ELECTIVE 1

(3)

UHR1012 ISLAMIC AND ASIA CIVILIZATIONS 1

(2)

BTP2412 ELECTRICAL

FUNDAMENTALS (2)

UHL2422 ENGLISH FOR


(2)

BTP2543 CONTROL &

INSTRUMENTATION (3)

BTP3422 INDUSTRIAL

STATISTICS FOR PHARMACEUTICAL

ENGINEERS (2)

BTP38*3 ELECTIVE 2

(3)

BTP1513 ENGINEERING

SCIENCE (3)

BTP2412 NUMERICAL METHODS &

OPTIMIZATION (2)

BTP2513 PHARMACEUTICAL

FORMULATION METHODS

(3)

BTP4253 BIO AND PHARMA

ANALYTICAL TECHNIQUES

(3)

BTP3363 MANUFACTURING

SYSTEMS LEAN SIX SIGMA

(3)


(1)

TOTAL CREDIT 19 19 19 19 19 19 19 12

TOTAL CREDIT FOR

GRADUATION 145


BACHELOR OF ENGINEERING TECHNOLOGY (INFRASTRUCTURE MANAGEMENT) WITH HONOURS



CO

UR

SES

UHL2400 FUNDAMENTAL OF

ENGLISH LANGUAGE

(0)

UHL2412 ENGLISH FOR


(2)

UHL2422 ENGLISH FOR


(2)

UHL2432 ENGLISH FOR


(2)

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

(1)

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

(1)

BET3522

PROCUREMENT FOR

INFRASTRUCTURAL PROJECT

(2)

BET4899 INDUSTRIAL

TRAINING (9)


(2)


(1)

UHR1012 ISLAMIC & ASIAN CIVILIZATIONS 1

(2)

UHS2021 SOFT SKILLS

2 (1)

UHE3122 ISLAMIC

INSTITUTIONS (2)

BET4042 ENTRE

PRENEURSHIP FOR TECHNOLOGISTS

(2)

BET4783 FINAL YEAR PROJECT 2

(3)

BET4893

INDUSTRIAL TRAINING REPORT

(3)

UQ*20*1 CO-CURRICULUM 1

(1)

BUM2413 APPLIED

STATISTICS (3)

UQ*20*1 CO-CURRICULUM 2

(1)

BET1263 GEOLOGY AND GEO

MECHANICS (3)

BET4222 TECHNOLOGIST IN SOCIETY AND

LAW (2)

BET3683 FINAL YEAR PROJECT 1

(3)

BET4774 TECHNOLOGY

DESIGN PROJECT (4)

BUM2123 APPLIED

CALCULUS (3)

BET2343 SPATIAL SCIENCE

ENGINEERING (3)

BUS1303 APPLIED PHYSICS

(3)

BET2344 INFRASTRUCTURAL

PLANNING (STUDIO 4) (4)

BET3573 ENGINEERING MANAGEMENT

(3)


MANAGEMENT (STUDIO 6)

(4)

BET4*13 ELECTIVE 1

(3)


EXPLORATION (STUDIO 1)

(4)

BET1213 ENGINEERING

PRACTICE 1 (3)

BET1413 PROJECT

SCHEDULING (3)

BET2422 FINANCIAL

MANAGEMENT FOR DECISION MAKING

(2)

BET3583 RESEARCH

METHODOLOGY (3)

BET3593 QUALITY

PERFORMANCE MANAGEMENT

(3)

BET4*23 ELECTIVE 2

(3)

BET1123 INTRODUCTION TO INFRASTRUCTURAL

ENGINEERING (3)

BET1113 GREEN

TECHNOLOGY FOR INFRA. FACILITIES

(3)


PROJECT (STUDIO 3)

(4)

BET2373 CONSTRUCTION ENGINEERING

(3)

BET2573 CONSTRUCTION

METHODS (3)

BET1613 ENGINEERING

PRACTICE 3 (3)

BET4*33 ELECTIVE 3

(3)

BET1142 INTRODUCTION TO

ENGINEERING SURVEYING

(2)

BET1474 INFRASTRUCTURE

INVESTIGATION (STUDIO 2)

(4)

BET2492 CONSTRUCTION SAFETY (OSHA)

(2)

BET1413 ENGINEERING

PRACTICE 2 (3)

BET3634 INFRASTRUCTU

RAL DESIGN (STUDIO 5)

(4)

BET3513 CONFLICT AND

RISK MANAGEMENT (3)

BET1253 INTRODUCTION TO

ENGINEERING PROBLEM SOLVING

(3)

BET2483 PROBLEM SOLVING

AND ANALYSIS (3)

TOTAL CREDIT 18 19 20 18 18 19 18 12

TOTAL CREDIT FOR

GRADUATION 142



82



BACHELOR OF OCCUPATIONAL SAFETY & HEALTH WITH HONOURS



CO

UR

SES

UHL2412 ENGLISH FOR

ACADEMIC COMMUNICATIONS

(2)

UHL2422 ENGLISH FOR

TECHNICAL COMMUNICATIONS

(2)

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

(1)

BPF2123 QUALITY

MANAGEMENT SYSTEM

(3)

UHS2011 SOFT-SKILLS

2 (1)

UGE2002 TECHNO

PRENEURSHIP (2)

BPS3343 PROSESS

SAFETY & LOSS PREVENTION

(3)

BPS4538 INDUSTRIAL

TRAINING (8)

UHR1012 ISLAMIC AND ASIA

CIVILIZATIONS (2)

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

(1)

UHR2012 ISLAMIC

INSTITUTION (2)

BPS2343 OCCUPATIONAL

EPIDEMIOLOGY & DISEASE

(3)

BPF2113 RESEARCH

METHOD (3)

UHL2432 ENGLISH FOR

PROFESSIONAL COMMUNICATIONS

(2)

BPS4323 OSH

MANAGEMENT SYSTEM

(3)

BPS4534 INDUSTRIAL

TRAINING REPORT

(4)

UQB**1 CO-CURRICULUM 1

(1)


(2)


(1)

BPS3343 EMERGENCY RESPONSE &

PREPAREDNESS (3)

BPS3313 APPLIED

MECHANICS FOR SAFETY

(3)

BPS3343 ACCIDENT &

INCIDENT INVESTIGATION

ANALYSIS (3)

BPS4613 CONSTRUCTION

SAFETY (ELECTIVE 4)

(3)


(3)


(1)

BUM2413 APPLIED

STATISTICS (3)

BPS2363 ERGONOMICS

(3)

BPS3323 INDUSTRIAL

SAFETY (3)

BPS3353 HUMAN FACTOR IN

SAFETY ENGINEERING

(3)

BPS4514 FINAL YEAR PROJECT 2

(4)

BPS1313 OSH

FUNDAMENTAL (3)

BPS1363 INDUSTRIAL

PSYCHOLOGY (3)

BPF2413 MANAGEMENT INFORMATION

SYSTEM (3)

BPS2374 EXPOSURE

MEASUREMENT TECHNIQUES &

ANALYSIS (4)

(ELECTIVE 2) (3)

(ELECTIVE 3) (3)

BPS1323

INTRODUCTION TO ENGINEERING

SCIENCE (3)

BPS1343 FIRE AND BUILDING

SAFETY (3)

BPS3323 INDUSTRIAL

HYGIENE (3)

(ELECTIVE 1) (3)


(2)

BPS1333 OSHE LEGISLATION

(3)

BPS1353 HAZARD

RECOGNITION & RISK MANAGEMENT

(3)

BPS2323 BEHAVIOR

BASED SAFETY (3)

BPS1363 INDUSTRIAL

TOXICOLOGY (3)

BPS2333 TOXIC &

HAZARDOUS WASTE

MANAGEMENT (3)

TOTAL CREDIT 17 18 19 19 13 15 16 12

TOTAL CREDIT FOR

GRADUATION 126



83



BACHELOR OF OCCUPATIONAL SAFETY & HEALTH WITH HONOURS



CO

UR

SES

UHL2412 ENGLISH FOR

ACADEMIC COMMUNICATIONS

(2)

UHL2422 ENGLISH FOR

TECHNICAL COMMUNICATIONS

(2)

UHF21*1 FOREIGN

LANGUAGES LEVEL 2

(1)

BPF2123 QUALITY

MANAGEMENT SYSTEM

(3)

UHS2011 SOFT-SKILLS

2 (1)

UGE2002 TECHNO

PRENEURSHIP (2)

BPS3343 PROSESS

SAFETY & LOSS PREVENTION

(3)

BPS4538 INDUSTRIAL

TRAINING (8)

UHR1012 ISLAMIC AND ASIA

CIVILIZATIONS (2)

UHF11*1 FOREIGN

LANGUAGES LEVEL 1

(1)

UHR2012 ISLAMIC

INSTITUTION (2)

BPS2343 OCCUPATIONAL

EPIDEMIOLOGY & DISEASE

(3)

BPF2113 RESEARCH

METHOD (3)

UHL2432 ENGLISH FOR

PROFESSIONAL COMMUNICATIONS

(2)

BPS4323 OSH

MANAGEMENT SYSTEM

(3)

BPS4534 INDUSTRIAL

TRAINING REPORT

(4)

UQB**1 CO-CURRICULUM 1

(1)


(2)


(1)

BPS3343 EMERGENCY RESPONSE &

PREPAREDNESS (3)

BPS3313 APPLIED

MECHANICS FOR SAFETY

(3)

BPS3343 ACCIDENT &

INCIDENT INVESTIGATION

ANALYSIS (3)

BPS4613 CONSTRUCTION

SAFETY (ELECTIVE 4)

(3)


(3)


(1)

BUM2413 APPLIED

STATISTICS (3)

BPS2363 ERGONOMICS

(3)

BPS3323 INDUSTRIAL

SAFETY (3)

BPS3353 HUMAN FACTOR IN

SAFETY ENGINEERING

(3)


(4)

BPS1313 OSH

FUNDAMENTAL (3)

BPS1363 INDUSTRIAL

PSYCHOLOGY (3)


SYSTEM (3)

BPS2374 EXPOSURE

MEASUREMENT TECHNIQUES &

ANALYSIS (4)

(ELECTIVE 2) (3)

(ELECTIVE 3) (3)

BPS1323

INTRODUCTION TO ENGINEERING

SCIENCE (3)

BPS1343 FIRE AND BUILDING

SAFETY (3)

BPS3323 INDUSTRIAL

HYGIENE (3)

(ELECTIVE 1) (3)


(2)

BPS1333 OSHE LEGISLATION

(3)

BPS1353 HAZARD

RECOGNITION & RISK MANAGEMENT

(3)

BPS2323 BEHAVIOR

BASED SAFETY (3)

BPS1363 INDUSTRIAL

TOXICOLOGY (3)

BPS2333 TOXIC &

HAZARDOUS WASTE

MANAGEMENT (3)

TOTAL CREDIT 17 18 19 19 13 15 16 12

TOTAL CREDIT FOR

GRADUATION 126


ELECTIVE COURSES FOR BACHELOR OF OCCUPATIONAL SAFETY & HEALTH (HONOURS)


1 BPS2613 ENVIRONMENTAL MANAGEMENT & SUSTAINABILITY 3

2 BPS3613 SOLID WASTE MANAGEMENT 3

3 BPS4613 WASTEWATER TREATMENT TECHNOLOGY 3

4 BPS3623 AIR POLLUTION CONTROL TECHNOLOGY 3


ELECTIVE COURSES FOR BACHELOR OF ENGINEERING TECHNOLOGY (MANUFACTURING)

WITH HONOURS


1 BTM4713 LEAN MANUFACTURING SYSTEM 3

2 BTM4723 ADVANCED MANUFACTURING PROCESS 3

3 BTE/BTV47*3 SELECT 1 FROM OTHER PROGRAMME 3

4


ELECTIVE COURSES FOR

BACHELOR OF ENGINEERING TECHNOLOGY (ELECTRICAL) WITH HONOURS


1 BTE4713 PROGRAMMABLE LOGIC CONTROLLER 3

2 BTE4723 ADVANCED ELECTRONICS CIRCUITS 3

3 BTE4733 SENSORS TECHNOLOGY 3

4



84


ELECTIVE COURSES FOR BACHELOR OF ENGINEERING TECHNOLOGY (ENERGY AND

ENVIRONMENT) WITH HONOURS


1 BTV4713 SOLAR TECHNOLOGY 3

2 BTV4723 WATER AND WASTEWATER MONITORING 3

3 BTV4733 ENVIRONMENTAL MANAGEMENT SYSTEM 3

4





1 BTP3813 ADVANCED DRUG DELIVERY SYSTEMS OR 3

2 BTP3823 MATERIAL PROCESSES AND COLLOID SCIENCE 3

3 BTP3833 OCCUPATIONAL IN PHARMACEUTICAL INDUSTRY OR 3

4 BTP3843 WATER TECHNOLOGY & HEATING, VENTILATING AND AIR CONDITIONING SYSTEM 3

5 BTP38*2 INTRODUCTION TO PHARMACEUTICAL OR 2

6 BTP38*2 BIO PHARMACUETIC 2


ELECTIVE COURSES FOR BACHELOR OF ENGINEERING TECHNOLOGY (INFRASTRUCTURE

MANAGEMENT) WITH HONOURS


1 BET4*13 TBA 3

2 BET4*23 TBA 3

3 BET4*33 TBA 3

4



85


ELECTIVE COURSES FOR BACHELOR OF ENGINEERING TECHNOLOGY (ENERGY AND

ENVIRONMENT) WITH HONOURS


1 BTV4713 SOLAR TECHNOLOGY 3

2 BTV4723 WATER AND WASTEWATER MONITORING 3

3 BTV4733 ENVIRONMENTAL MANAGEMENT SYSTEM 3

4





1 BTP3813 ADVANCED DRUG DELIVERY SYSTEMS OR 3

2 BTP3823 MATERIAL PROCESSES AND COLLOID SCIENCE 3

3 BTP3833 OCCUPATIONAL IN PHARMACEUTICAL INDUSTRY OR 3

4 BTP3843 WATER TECHNOLOGY & HEATING, VENTILATING AND AIR CONDITIONING SYSTEM 3

5 BTP38*2 INTRODUCTION TO PHARMACEUTICAL OR 2

6 BTP38*2 BIO PHARMACUETIC 2


ELECTIVE COURSES FOR BACHELOR OF ENGINEERING TECHNOLOGY (INFRASTRUCTURE

MANAGEMENT) WITH HONOURS


1 BET4*13 TBA 3

2 BET4*23 TBA 3

3 BET4*33 TBA 3

4


FACULTY OF INDUSTRIAL MANAGEMENT


86


FACULTY OF INDUSTRIAL MANAGEMENTINTRODUCTION

The Faculty of Industrial Management (FIM) was formally established on July 2014. However, the programmes were first being offered in 2008. The aim of FIM is to support the local and global economic development through education, research, commercialization and consultation. The faculty educational objectives are to produce graduates who are competent in business and technology and to lead education and research with collaborating partners.

The academic programmes i.e. Project Management (PM), Industrial Technology Management (ITM) and Business Engineering (BE) offered at FIM are developed to enhance the graduates’ capabilities to secure the jobs in government or private sectors as well as to provide a platform to be an entrepreneur in their corresponding field of specialization The PM and ITM programmes have produced hundreds of graduates to date while the BE programme, collaborated with Reutlingen University, Germany will commence in September 2015.

All of our academic programmes are accredited by the Malaysian Qualifications Agency (MQA) and therefore, our graduates have the option to further their studies at a higher degree level in numerous universities, locally and internationally in the future.

PROGRAMMES OFFERED§ Bachelor of Project Management with Honours§ Bachelor of Industrial Technology Management with Honours§ Bachelor of Business Engineering with Honours

CAREER OPPORTUNITY

Bachelor of Project Management with Honours

• Construction Project Executive• Contract Executive• Procurement Executive • IT Executive• Urban Planning Executive• Risk and Financial Management Executive• Facility Management Executive• Product Development Executive• Quality Management Executive


87


Bachelor of Industrial Technology Management with Honours

• Production Executive• Quality Executive• Production Planner• Procurement Officer• Logistic Executive• Kaizen Officer• Business Development Executive• Industrial Engineer• Manufacturing Superintendent• Human Resource Executive• Sales Executive• Marketing Executive

Bachelor of Business Engineering with Honours

• Production Executives / Engineer• Production Planner / Controller • Process Engineering Engineer• Industrial Engineer• Logistics Executives• Supply Chain Executives / Officer• Procurement Officer• Business Development Executives• Quality Executives / Engineer• Project Executives• Other relevant employment areas


88


FACULTY OF INDUSTRIAL MANAGEMENT CURRICULUM STRUCTURE

BACHELOR OF PROJECT MANAGEMENT WITH HONOURS


CO

UR

SES

BPF1113 PRINCIPLES OF MANAGEMENT

BPF2113 RESEARCH METHODOLOGY

BPF3113 MANAGING HUMAN CAPITAL

BPP4113 PROJECT COMMUNICATION &

NEGOTIATION

BPF1123 INDUSTRIAL PSYCHOLOGY

BPF2123 QUALITY MANAGEMENT SYSTEM

BPP3113 CHANGE MANAGEMENT

BPP4123 CONTRACT LAW

BPF1213 PRINCIPLES OF ECONOMICS

BPF2213

INTRODUCTION TO FINANCE

BPP3133

CONTRACT AND PROCUREMENT MANAGEMENT

BPP4133 STRATEGIC MANAGEMENT

BPF1223

INTRODUCTION TO COST ACCOUNTING

BPF2413

MANAGEMENT INFORMATION SYSTEM

BPP3143 PROJECT RISK MANAGEMENT

BPP4524 FINAL YEAR PROJECT II

BPP1113 PROJECT MANAGEMENT

BPP2113

PROJECT PLANNING AND CONTROL

BPP3213 ESTIMATING & SCHEDULING

BPP4534 INDUSTRIAL TRAINING REPORT

BPS1313 OSH FUNDAMENTALS

BPP2123 PROJECT PORTFOLIO MANAGEMENT

BPP3413 PROJECT MANAGEMENT TOOLS

BPP4538 INDUSTRIAL TRAINING

BUM1123

MATHEMATICS FOR MANAGEMENT

BPP2223

PROJECT COST & BUDGET MANAGEMENT

BPP3522 FINAL YEAR PROJECT I

BPS2113 OSH MANAGEMENT SYSTEM


# ELECTIVE COURSE 1 # ELECTIVE COURSE 2

# ELECTIVE COURSE 3

102 21 27 29 25

18

UNIVERSITY COURSES : CO-CURRICULUM I, CO-CURRICULUM II, TECHNOPRENEURSHIP, ISLAMIC & ASIAN CIVILIZATION 1, ETHNIC RELATIONS, FOREIGN LANGUAGES LEVEL 1, FOREIGN LANGUAGES LEVEL 2, FUNDAMENTALS OF ENGLISH LANGUAGE, , ENGLISH FOR ACADEMIC COMMUNICATION ENGLISH FOR PROFESSIONAL COMMUNICATION, ENGLISH FOR TECHNICAL COMMUNICATION, SOFT SKILLS I, SOFT SKILLS II

120 TOTAL CREDIT FOR GRADUATION


89



BACHELOR OF PROJECT MANAGEMENT WITH HONOURS


CO

UR

SES




BPP4113 PROJECT COMMUNICATION &

NEGOTIATION



BPP3113 CHANGE MANAGEMENT

BPP4123 CONTRACT LAW

BPF1213 PRINCIPLES OF ECONOMICS

BPF2213

INTRODUCTION TO FINANCE

BPP3133

CONTRACT AND PROCUREMENT MANAGEMENT

BPP4133 STRATEGIC MANAGEMENT

BPF1223


BPF2413

MANAGEMENT INFORMATION SYSTEM

BPP3143 PROJECT RISK MANAGEMENT

BPP4524 FINAL YEAR PROJECT II

BPP1113 PROJECT MANAGEMENT

BPP2113

PROJECT PLANNING AND CONTROL

BPP3213 ESTIMATING & SCHEDULING

BPP4534 INDUSTRIAL TRAINING REPORT


BPP2123 PROJECT PORTFOLIO MANAGEMENT

BPP3413 PROJECT MANAGEMENT TOOLS

BPP4538 INDUSTRIAL TRAINING

BUM1123

MATHEMATICS FOR MANAGEMENT

BPP2223

PROJECT COST & BUDGET MANAGEMENT

BPP3522 FINAL YEAR PROJECT I

BPS2113 OSH MANAGEMENT SYSTEM


# ELECTIVE COURSE 1 # ELECTIVE COURSE 2

# ELECTIVE COURSE 3

102 21 27 29 25

18



ELECTIVE COURSES FOR BACHELOR OF PROJECT MANAGEMENT WITH (HONOURS)


1 BPP2533 CONSTRUCTION TECHNOLOGY 3

2 BPP3613 STAKEHOLDER MANAGEMENT 3

3 BPT3113 MANAGEMENT OF TECHNOLOGY 3



90



BACHELOR OF INDUSTRIAL TECHNOLOGY MANAGEMENT WITH HONOURS


CO

UR

SES



SYSTEM


BPT4113 STRATEGIC MANAGEMENT

BUM1123 MATHEMATICS FOR MANAGEMENT

BPF2213 INTRODUCTION TO FINANCE

BPT3113 MANAGEMENT OF TECHNOLOGY

BPT4413 MANUFACTURING

TECHNOLOGY


BPT2413 PRINCIPLES OF CAD/CAM

BPT3413 OPTIMIZATION METHODS

BPT4423 MANUFACTURING DESIGN

BPF1223


BPT2113 LEGAL AND ETHICAL ISSUES

BPT3133 PROCUREMENT IN INDUSTRIAL

MANAGEMENT

BPT4514 FINAL YEAR PROJECT II



BPT3123 INDUSTRIAL LOGISTIC

BPT4538 INDUSTRIAL TRAINING

BPT1113 OPERATION & PRODUCTION




REPORT

BPT2123 SUPPLY CHAIN MANAGEMENT

BPT3423 PRODUCTION PLANNING AND

CONTROL

BPT2423 STATISTICAL PROCESS CONTROL

BPT3153 CREATIVITY AND INNOVATION

# ELECTIVE COURSE BPT3512

FINAL YEAR PROJECT I

# ELECTIVE COURSE

102 21 27 29 25

18




91



BACHELOR OF INDUSTRIAL TECHNOLOGY MANAGEMENT WITH HONOURS


CO

UR

SES



SYSTEM


BPT4113 STRATEGIC MANAGEMENT

BUM1123 MATHEMATICS FOR MANAGEMENT

BPF2213 INTRODUCTION TO FINANCE

BPT3113 MANAGEMENT OF TECHNOLOGY

BPT4413 MANUFACTURING

TECHNOLOGY


BPT2413 PRINCIPLES OF CAD/CAM

BPT3413 OPTIMIZATION METHODS

BPT4423 MANUFACTURING DESIGN

BPF1223


BPT2113 LEGAL AND ETHICAL ISSUES

BPT3133 PROCUREMENT IN INDUSTRIAL

MANAGEMENT

BPT4514 FINAL YEAR PROJECT II



BPT3123 INDUSTRIAL LOGISTIC


BPT1113 OPERATION & PRODUCTION




REPORT

BPT2123 SUPPLY CHAIN MANAGEMENT

BPT3423 PRODUCTION PLANNING AND

CONTROL

BPT2423 STATISTICAL PROCESS CONTROL

BPT3153 CREATIVITY AND INNOVATION

# ELECTIVE COURSE BPT3512

FINAL YEAR PROJECT I

# ELECTIVE COURSE

102 21 27 29 25

18



ELECTIVE COURSES FOR BACHELOR OF INDUSTRIAL TECHNOLOGY MANAGEMENT WITH (HONOURS)


1 BPT2633 LEAN MANAGEMENT 3

2 BPT3633 INDUSTRIAL PROJECT MANAGEMENT 3



92



BACHELOR OF BUSINESS ENGINEERING WITH HONOURS


SEMESTER FIRST SECOND LONG

SEMESTER BREAK

FIRST SECOND FIRST SECOND FIRST SECOND

CO

UR

SES

BPN1013 PRINCIPLES OF MANAGEMENT

BPN1062 FUNDAMENTALS

OF PROJECT MANAGEMENT

BPN2113 SUPPLY CHAIN MANAGEMENT

BPN2013 QUALITY

MANAGEMENT

BPN2073 INDIVIDUAL

FIELD PROJECT ENGINEERING

BPN3023 OPERATIONS RESEARCH

BPN3038 INDUSTRIAL

TRAINING

BPE41*2 / BPE43*2 ELECTIVE

(BUSINESS) III

BPN4013 INDIVIDUAL

STUDY PROJECT

(ISP)

BPN1022 BUSINESS LAW

BPN1072 ACCOUNTING II -

COST ACCOUNTING

BPN2123 CORPORATE FINANCE &

INVESTMENT

BPN2023 INDUSTRIAL

ENGINEERING

BPN2073 INDIVIDUAL

FIELD PROJECT BUSINESS

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) I

BPN3044 INDUSTRIAL TRAINING –

REPORT


(ENGINEERING) III

BPN4026 THESIS

BPN1032 ACCOUNTING I -

FINANCIAL ACCOUNTING

BPN1083 ENGINEERING MECHANICS

UHG2002 DEUTSCHE SPRACHE III

BPN2032 FUNDAMENTALS OF MARKETING

BPN2092 CSR PROJECT

BPE42*3 / BPE44*3

ELECTIVE (ENGINEERING) I

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) IV

BPN4033 CROSS

MODULE SEMINAR II

BPN1043 INTRODUCTION TO COMPUTER

SCIENCE

BPN1093 TECHNICAL

DESIGN / CAD

BPN2043 FUNDAMENTALS OF ELECTRICAL ENGINEERING

BPN2103 CROSS MODULE

SEMINAR I

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) II

BPE42*3 / BPE44*3

ELECTIVE (ENGINEERING) IV

BUM1113

TECHNICAL MATHEMATICS

BUM1223

CALCULUS

BPN2053 ERP SYSTEMS &

BUSINESS PROCESS

MANAGEMENT

UGE2002 TECHNOPRE

NEURSHIP

BPE42*3 / BPE44*3

ELECTIVE (ENGINEERING)

II

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) V

UHG1002

DEUTSCHE SPRACHE I

UHG1012

DEUTSCHE SPRACHE II

BUM2423

STATISTICS WITH

TECHNOLOGY

UPN3012

INTERCULTURAL SKILLS

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) VI

UHR1012

ISLAMIC AND ASIAN

CIVILIZATIONS 1

UHM2022 ETHNIC

RELATIONS

UHG2012 DEUTSCHE

SPRACHE IV

UHS1021

SOFT SKILLS 1

UHS2021

SOFT SKILLS 2

UQB1**1 COQ – I

UQ*2**1 COQ-II

TOTAL CREDIT PER SEMESTER 19 19 8 19 13 17 12 16 12

OVERALL TOTAL CREDIT FOR

GRADUATITION

135


93





SEMESTER FIRST SECOND LONG

SEMESTER BREAK

FIRST SECOND FIRST SECOND FIRST SECOND

CO

UR

SES

BPN1013 PRINCIPLES OF MANAGEMENT

BPN1062 FUNDAMENTALS

OF PROJECT MANAGEMENT

BPN2113 SUPPLY CHAIN MANAGEMENT

BPN2013 QUALITY

MANAGEMENT

BPN2073 INDIVIDUAL

FIELD PROJECT ENGINEERING

BPN3023 OPERATIONS RESEARCH

BPN3038 INDUSTRIAL

TRAINING


(BUSINESS) III

BPN4013 INDIVIDUAL

STUDY PROJECT

(ISP)

BPN1022 BUSINESS LAW

BPN1072 ACCOUNTING II -

COST ACCOUNTING

BPN2123 CORPORATE FINANCE &

INVESTMENT

BPN2023 INDUSTRIAL

ENGINEERING

BPN2073 INDIVIDUAL

FIELD PROJECT BUSINESS

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) I

BPN3044 INDUSTRIAL TRAINING –

REPORT


(ENGINEERING) III

BPN4026 THESIS

BPN1032 ACCOUNTING I -

FINANCIAL ACCOUNTING

BPN1083 ENGINEERING MECHANICS

UHG2002 DEUTSCHE SPRACHE III

BPN2032 FUNDAMENTALS OF MARKETING

BPN2092 CSR PROJECT

BPE42*3 / BPE44*3

ELECTIVE (ENGINEERING) I

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) IV

BPN4033 CROSS

MODULE SEMINAR II

BPN1043 INTRODUCTION TO COMPUTER

SCIENCE

BPN1093 TECHNICAL

DESIGN / CAD

BPN2043 FUNDAMENTALS OF ELECTRICAL ENGINEERING

BPN2103 CROSS MODULE

SEMINAR I

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) II

BPE42*3 / BPE44*3

ELECTIVE (ENGINEERING) IV

BUM1113

TECHNICAL MATHEMATICS

BUM1223

CALCULUS

BPN2053 ERP SYSTEMS &

BUSINESS PROCESS

MANAGEMENT

UGE2002 TECHNOPRE

NEURSHIP

BPE42*3 / BPE44*3

ELECTIVE (ENGINEERING)

II

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) V

UHG1002

DEUTSCHE SPRACHE I

UHG1012

DEUTSCHE SPRACHE II

BUM2423

STATISTICS WITH

TECHNOLOGY

UPN3012

INTERCULTURAL SKILLS

BPE41*3 / BPE43*3

ELECTIVE (BUSINESS) VI

UHR1012

ISLAMIC AND ASIAN

CIVILIZATIONS 1

UHM2022 ETHNIC

RELATIONS

UHG2012 DEUTSCHE

SPRACHE IV

UHS1021

SOFT SKILLS 1

UHS2021

SOFT SKILLS 2

UQB1**1 COQ – I

UQ*2**1 COQ-II

TOTAL CREDIT PER SEMESTER 19 19 8 19 13 17 12 16 12

OVERALL TOTAL CREDIT FOR

GRADUATITION

135



ELECTIVES (SET 1) CODE COURSE CREDIT HOUR

ELECTIVE (BUSINESS) I, II, IV, V, VI CHOOSE FIVE (15 CREDITS)

BPE4123 SUPPLY CHAIN CONTROL & MANAGEMENT CONTROL SYSTEMS 3

BPE4133 ADVANCED PROJECT MANAGEMENT & CONTROL 3

BPE4143 LEAN MANAGEMENT 3

BPE4153 SIMULATION GAME 3

BPE4163 TECHNICAL PLANNING CASE 3

ELECTIVE (BUSINESS) III CHOOSE ONE (2 CREDITS)

BPE4112 INNOVATION & TECHNOLOGY MANAGEMENT 2

BPE4122 HR MANAGEMENT 2

BPE4132 INTERNATIONAL BUSINESS ENVIRONMENT 2

ELECTIVE (ENGINEERING) I. II, IV CHOOSE THREE (9 CREDITS)

BPE4213 INTRA-LOGISTICS 3

BPE4223 DISTRIBUTION LOGISTICS 3

BPE4233 INTERNATIONAL TRANSPORT LOGISTICS 3

BPE4243 WAREHOUSE & INVENTORY PLANNING 3

ELECTIVE (ENGINEERING) III CHOOSE ONE (2 CREDITS)

BPE4212 DATABASE SYSTEMS 2

BPE4222 SUSTAINABILITY/ENERGY EFFICIENCY 2

BPE4232 POWER MANAGEMENT (ELECTRICAL GRIDS) 2

TOTAL CREDIT 28


94




BPE4313 PRODUCTION ACCOUNTING & CONTROL 3









ELECTIVE (ENGINEERING) I, II, IV CHOOSE THREE (9 CREDITS)

BPE4413 PRODUCTION PLANNING & METHODS 3

BPE4423 TECHNICAL APPLICATIONS & MACHINES 3

BPE4433 MATERIALS SCIENCE 3

BPE4443 PRODUCT ENGINEERING 3

BPE4453 ELECTRICAL DRIVES 3





TOTAL CREDIT 28


95




BPE4313 PRODUCTION ACCOUNTING & CONTROL 3









ELECTIVE (ENGINEERING) I, II, IV CHOOSE THREE (9 CREDITS)

BPE4413 PRODUCTION PLANNING & METHODS 3

BPE4423 TECHNICAL APPLICATIONS & MACHINES 3

BPE4433 MATERIALS SCIENCE 3

BPE4443 PRODUCT ENGINEERING 3

BPE4453 ELECTRICAL DRIVES 3





TOTAL CREDIT 28

CENTRE FOR MODERN LANGUAGE AND HUMAN SCIENCE


96


CENTRE FOR MODERN LANGUAGE AND HUMAN SCIENCE

INTRODUCTION

The Centre for Modern Languages and Human Sciences (CMLHS) was established to complement the development of students’ technical and engineering knowledge; as knowledge and skills in engineering alone is insufficient to produce competitive graduates. The centre is divided into three departments, which are the Human Sciences Department, the Modern Languages Department and Foreign Languages Department. Being a service centre, we not only provide University core subjects, our responsibilties also include providing training for students such as MUET and Study Skills Workshop to name a few, and training for staff such as IELTS Course for Academic Staff and Communication English courses. We also provide external trainings to multinational organizations. Our clientele include BASF Petronas, AMM Pekan, Felda Prodata and Pahang State Secretary Office.

CMLHS VISION We aspire to be a centre of excellence in contributing to human development and nation building.

CMLHS MISSION

To achieve our vision, we conduct outstanding academic programmes, training and research in nurturing lifelong learners who uphold universal values. The expertise of our associates and the use of relevant technology are integral towards realizing our aspiration.

CMLHS OBJECTIVES

To develop academic programmes in human sciences which have been proven to be able to mould competitive graduatesTo be a Centre of Excellence in research, consultancy and training in the region and in the global arena.

COURSES OFFERED

There are a total of four University Core courses offered by the centrer:• Courses offered by Modern Languages Department• Courses offered by Human Sciences Department • Courses offered by Foreign Languages Department• Courses offered by Soft Skills Department• Various elective courses


97


MODERN LANGUAGES COURSES

Degree (4 levels)UHL2400 Fundamentals of English LanguageUHL2412 English for Academic CommunicationUHL2422 English for Technical CommunicationUHL2432 English for Professional Communication

Diploma (3 levels)UHL1412 Foundation EnglishUHL1422 English for Academic SkillsUHL1432 English for Occupational Communication

HUMAN SCIENCES COURSES

Degree and Diploma UHM2022 Ethnic RelationsUHR1012 Islamic & Asian Civilisation 1

Foreign Languages Courses

Degree * Degree students are to select one language only and take two levels of foreign language courses.

BEGINNERS LEVEL

UHF1111 Mandarin for BeginnersUHF1121 German for BeginnersUHF1131 Japanese for BeginnersUHF1141 Arabic for BeginersUHF1151 Spanish for BeginnersUHF1161 Malay Language for BeginnersUHF1271 Turkish 1

INTERMEDIATE LEVEL

UHF2111 Mandarin for IntermediateUHF2121 German for IntermediateUHF2131 Japanese for IntermediateUHF2141 Arabic for IntermediateUHF2151 Spanish for IntermediateUHF2161 Malay Language for IntermediateUHF2271 Turkish 2


98


Soft Skills Courses

UHS1021 Soft Skills 1UHS2021 Soft Skills 2

ELECTIVE COURSES

UHE3012 Contemporary Leadership in CommunityUHE3022 Critical Thinking Through LiteratureUHE3032 Introduction to Human BehaviourUHE3042 Organizational CounselingUHE3062 Malaysia: The Impact of GlobalizationUHE3072 Technology for Human Capital DevelopmentUHE3082 Creative WritingUHE3092 English MechanicsUHE3112 Language in SocietyUHE3122 Islamic InstitutionsUHE3132 Public SpeakingUHE3142 Project Based Proposal WritingUHE3152 Interpersonal EffectivenessUHE3162 Family System in IslamUHE3182 Malaysia StudiesUHE3192 Fundamental Ibadah in IslamUHE3202 Introduction to Halal Studies


99


STUDENTS AFFAIRS AND ALUMNI DEPARTMENT


100


STUDENTS AFFAIRS AND ALUMNI DEPARTMENTINTRODUCTION

Student Affairs and Alumni Department (SAffAD), Universiti Malaysia Pahang (UMP) was established in 2002. SAffAD is responsible for managing the welfare and development of students in supporting the vision, mission, philosophy and core values of the university.

SERVICES OFFERED

WELFARE & STUDENT FINANCE

Students are eligible to apply for scholarship/education loans offered by any agencies such as:

• Perbadanan Tabung Pendidikan Tinggi Nasional (PTPTN)• Jabatan Perkhidmatan Awam (JPA)• Yayasan Pahang• Yayasan Tunku Abdul Rahman• Gamuda Berhad• Yayasan KLK• Any education loan from SUK / Yayasan Negeri

Students are covered under Skim Perlindungan Takaful Berkelompok which seeks to:Provides basic protection scheme in the form of compensation in the event of accidents or things that are not desired during the study.

Alleviate the financial burden on students and their heirs.

It is a 24-hour protection benefits. A claim can be made if admitted for treatment / medical examination, an accident, total permanent disability due to accident, death or claim expenses of hospital bills not covered by UMP Student Health Centre.

Students with financial problems during their studies can apply for financial assistance provided such as:

• Short Term Loan• Subsistence assistance• Education fees assistance• Disabled student assistance

STUDENT COUNSELING SERVICES

Individual counselingGroup counselingPsychology inventory and careerProgrammes such as preventive programmes, development, rehabilitation, crisis and intervention


101


Facilities provided:

• Therapy room• Reading material• Psychological inventory

ACCOMODATION

Five colleges are provided in the campus. Four colleges at Gambang Campus and one college at Pekan Campus. Both campuses can accommodate up to 8,000 students. It is compulsory for the first year students to stay in the campus.

Accommodation for second year student and above is assessed through merit and demerit system.Active students, students with health problems and students with disabilities are given priority to occupy the residential colleges.

Air-conditioned rooms are also provided with the appropriate rate.Facilities provided at the residential campuses are:

• Student Park• Cafeteria• Student Lounges• Gymnasium• Mini Shops


102


CO-CURRICULUM CENTRE


103


CO-CURRICULUM CENTREINTRODUCTION

Co-curriculum Centre, Universiti Malaysia Pahang was established on 16 January 2009 to create balanced human aspects of academic and soft skills. It also acts as a catalyst in producing students who have a sense of identity, innovative, resilient and has high soft skills through extra-curricular activities. This centre plays a significant role in the supply of co-curriculum courses to university, supervision of student bodies and the implementation and expansion of cultural activities.

OBJECTIVES

Strengthen and enhance co-curricular courses, supervision of student organizations and cultural activities through a systematic planning and management.

Provide encouragement to the graduates to choose programmes / clubs / activities based on interests and their capabilities.

To produce graduates who have high self-esteem, knowledge, integrity, creativity and innovation in line with the needs of the university and industry.

Plan and supervise extra-curricular activities and give recognition through Learning Outcome (LO) and Soft Skills (KI) and the Merit System in accordance with the soft skills modules from the Ministry of Higher Education in order to produce graduates who are holistic.

FUNCTIONS

A. Coordinating co-curricular courses• Offering co-curricular courses • Developing and diversifying the new co-curriculum course• Appoint a qualified coach for each co-curriculum courses • Supervise and manage the implementation of co-curriculum courses in terms of logistics and financial.•

B. Supervise and assist the implementation of club activities / student associations• Supervise the activities organized or participated by students.• To assist the implementation of the activities in the financial and logistical aspects.• Provide recognition in the form of merit and a certificate to every student involvement.

C. Supervise and implement cultural activities• Oversee the cultural activities organized or participated by students.• To assist the implementation of cultural activities of the university.• To help develop the cultural skills among students.• Provide recognition in the form of merit and certificate for every student involvement.

SYNOPSIS OF CREDITED CO-CURRICULUM COURSES

Student of Universiti Malaysia Pahang must take two credit hours of co-curriculum courses. The courses offered are divided into two components. The first component is a Uniformed Body and the second is based on eight soft skills attributes (i.e. Leadership, Communication, Innovation, Cultural, Volunteerism, Sport, Entrepreneurship, and Community Service).


104


Diploma students can only choose Briged Siswa for the first component and they do not have to take the second component. While for Undergraduate students, who are interested in other Uniformed Body courses such as SUKSIS Corps, Marine Corps and SISPA, they need to follow this course until commissioning. Meanwhile, those who choose Briged Siswa and passed, they have to take any courses available in the second component for them to graduate.

LIST OF CREDITED CO-CURRICULUM COURSES

Component I

• Briged Siswa UQB1011• Kor Sukarelawan Polis Siswa/i (SUKSIS I) UQB1021• Kor Sukarelawan Polis Siswa/i (SUKSIS II) UQB2021• Kor Sukarelawan Siswa/i Pertahanan Awam (SISPA I) UQB1031• Kor Sukarelawan Siswa/i Pertahanan Awam (SISPA II) UQB2031• PALAPES Laut I UQB1041• PALAPES Laut II UQB2041• PALAPES Udara UQB1051• PALAPES Udara UQB2051

Component II

• Kompang UQN2011• Nasyid UQN2021• Anyaman UQN2031• Kaunselor Siswa UQP2011• Iqra’ UQP2021• Debat Bahasa Melayu UQP2031• Pengurusan Majlis UQP2071• Pengurusan Bencana UQP2081• Kepimpinan UQP2131• Kayak UQS2011• Trekking UQS2021• Silat Olah Raga UQS2031• Bola Sepak UQS2041• Hoki UQS2051• Handball UQS2061• Kriket UQS2071• Archery UQS2081• Fitness UQS2091• Mountain Bike UQS2111• Paintball UQS2121• Basketball UQS 2131• RC Speed Boat UQS2141• Golf UQS2151• Futsal UQS2161• Robotic UQD2011


105


SYNOPSIS OF STUDENT SOCIETIES & CULTURAL ACTIVITIES

Until April 2012, there are more than 70 student societies that have been established in Universiti Malaysia Pahang. The societies are divided into eight Student Development Core such as Leadership, Public Speaking, Innovation, Volunteering, Community Service, Sport, Entrepreneurship, and Culture. Each student is free to join the societies by interests and preferences of the individual.

Student involvement in the societies & culture is the process of education or training to develop soft skills among students. This agenda in line with the PSPTN CAPS “The Holistic Student Development” and it is a continuation of co-curriculum courses. Recognition through the merit and certificates is an advantage to students of the Universiti Malaysia Pahang compared to other institutions of higher learning.


106


ENTRY REQUIREMENTS


107



DEGREE PROGRAM


108


DIPLOMA HOLDER

NO

Diploma/Equivalent Minimum Requirements (i) Programme Name(ii) Code (iii) Duration of Study

General University Requirements

Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Possess Diploma or other qualification equivalently acknowledged by Malaysian Government and approved by University Senate; and

Obtained at least Band 1 in Malaysian University English Test (MUET).

1.

B.Eng (Hons.) Electrical Engineering (Electronics) JK02 8 Semester

Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained a relevant Diploma from Public Higher Education Institution (IPTA) with at least CGPA ≥ 2.70

or Obtained a relevant Diploma from Private Higher Education Institution (IPTS) / Polytechnic with at least CGPA ≥ 3.30

or Applicants who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.50 and 2 years of work experience in related fields can be considered. and Candidates must not be colour blind and physically handicapped which will complicate practical works

Note; Duration of study subjected to the credit exemption approval by the faculty.

2.

B.Eng (Hons.) Electrical Engineering (Power System) JK21 8 semester

FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERINGDEGREE PROGRAM KPM MATRICULATION/FOUNDATION STUDENT

NO

KPM Matriculation/Foundation Studies Minimum Requirements

(i) Programme Name (ii) Code (iii) Duration of Study

GENERAL UNIVERSITY REQUIREMENTS

Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Passed KPM Matriculation/UM Science Foundation/UiTM Science Foundation with at least a CGPA of 2.00; and Obtained at least Band 1 in Malaysian University English Test (MUET).


1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS

Obtained at least Grade C (2.00) in Matriculation/Foundation Studies level in the following subjects;

Mathematics / Engineering Mathematics

and

Obtained at least Grade C (2.00) in Matriculation/Foundation level in any two(2) of the following subjects;

Chemistry / Engineering Chemistry Physics / Engineering Physics Biology

Candidates without Physics subject in Matriculation/Foundation level need to have at least credit in Physics subject in SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

2.



109


DIPLOMA HOLDER

NO





1.




or Applicants who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.50 and 2 years of work experience in related fields can be considered. and Candidates must not be colour blind and physically handicapped which will complicate practical works


2.


KPM MATRICULATION/FOUNDATION STUDENT

NO


(i) Programme Name (ii) Code (iii) Duration of Study

GENERAL UNIVERSITY REQUIREMENTS



1.



Obtained at least Grade C (2.00) in Matriculation/Foundation Studies level in the following subjects;


and



Candidates without Physics subject in Matriculation/Foundation level need to have at least credit in Physics subject in SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

2.



110


STPM HOLDER

NO

STPM Minimum Requirements (i) Programme Name (ii) Code (iii) Duration of Study


Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu / Bahasa Malaysia July Paper; and Passed Sijil Tinggi Persekolahan Malaysia (STPM) with at least CGPA 2.00 and:

Grade C (CGPA 2.00) for General Studies subject;

and

Grade C (CGPA 2.00) in two (2) other subjects.

and



1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (CGPA 2.00) in STPM level for the following subjects:

Mathematics T / Further Mathematics T;

and Obtained at least Grade C (CGPA 2.00) in STPM level for any two (2) of the following subjects ;

Chemistry Physics Biology

Candidates without Physics subjects in STPM level need to have at least credit in Physics subject in SPM level and Candidates must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates who do not take Physics at STPM level need to take Basic Physics subject at University

2.



111


STPM HOLDER

NO





and


and



1.






Candidates without Physics subjects in STPM level need to have at least credit in Physics subject in SPM level and Candidates must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates who do not take Physics at STPM level need to take Basic Physics subject at University

2.



DIPLOMA PROGRAM


112


CERTIFICATE HOLDER

No.

Programme and Duration of Study Code

Minimum Requirements

GENERAL UNIVERSITY REQUIREMENTS (FOR ALL PROGRAMME)

1. Passed in Sijil Pelajaran Malaysia (SPM) or equivalent with at least CREDIT (GRADE C) in Bahasa Melayu.

1.


Diploma in Electrical Engineering (Industrial Electronics) (5 Semester + 1 Short Semester)

J2425

PROGRAMME REQUIREMENTS

1. Fulfill GENERAL UNIVERSITY

REQUIREMENTS. 2. Passed with Certificate or equivalent in related

field from the Institution acknowledged by the University Senate with at least CGPA 3.00

3. Candidates must not be colour blind and

physically handicapped which will complicate practical works

FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERINGDIPLOMA PROGRAM

SPM HOLDER

No.

Programme and Duration of

Study Code



1. Passed in Sijil Pelajaran Malaysia (SPM) or equivalent with at least FIVE (5) CREDIT (GRADE C) including Bahasa Melayu.

2. Passed at least (Grade E) in Sejarah.

1.



J2425


1. Fulfill GENERAL UNIVERSITY REQUIREMENTS. 2. Credit at least (Grade C) in the following subjects :

•Mathematics, •Additional Mathematics, •Physics/Chemistry.

3. Credit at least ONE (1) ( Grade C) in the following

subjects:-

•Information Technology •Physics •Chemistry •Invention •Biology •EngineeringTechnology •Mechacnical Engineering •Electrical & Electronics Engineering Studies •Technical Drawing

4. Passed at least ( Grade E) in English.

5. Candidates must not be colour blind and physically

handicapped which will complicate practical works


113


CERTIFICATE HOLDER

No.





1.



J2425


1. Fulfill GENERAL UNIVERSITY

REQUIREMENTS. 2. Passed with Certificate or equivalent in related




SPM HOLDER

No.

Programme and Duration of

Study Code





1.



J2425



•Mathematics, •Additional Mathematics, •Physics/Chemistry.


subjects:-

•Information Technology •Physics •Chemistry •Invention •Biology •EngineeringTechnology •Mechacnical Engineering •Electrical & Electronics Engineering Studies •Technical Drawing



handicapped which will complicate practical works


114


DIPLOMA HOLDER

NO






1.

B.Eng (Hons.) Civil Engineering JK01 8 semester



or Applications who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.30 and 2 years of work experience in related fields can be considered. and Candidates must not be colour blind and physically handicapped which will complicate practical works



DEGREE PROGRAM


115


FACULTY OF CIVIL ENGINEERING & EARTH RESOURCESDEGREE PROGRAM

DIPLOMA HOLDER

NO






1.







116



NO


(i) Programme Name(ii) Code (iii) Duration of Study




1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) in Matriculation/Foundation level in the following subjects;


and



Candidates without Physics subject in Matriculation/Foundation level need to have at least credit in Physics subject in SPM level.

and Candidates must not be colour blind and physically handicapped which will complicate practical works Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

STPM HOLDER

NO

STPM Minimum Requirements (i) Programme Name(ii) Code (iii) Duration of Study




and


and



1.






Candidates without Physics subject in STPM level need to have at least credit in Physics subject in SPM level.

and Candidates must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates who do not take Physics at STPM level need to take Basic Physics subject at University


117



NO






1.




and



Candidates without Physics subject in Matriculation/Foundation level need to have at least credit in Physics subject in SPM level.

and Candidates must not be colour blind and physically handicapped which will complicate practical works Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

STPM HOLDER

NO





and


and



1.









118


CERTIFICATE HOLDER

No.

Programme and Duration of Study Code Minimum Requirements



1.


Diploma in Civil Engineering (5 Semester + 1 Short Semester)

J2410

PROGRAMME SPECIAL REQUIREMENTS

1. Fulfill GENERAL UNIVERSITY REQUIREMENTS. 2. Passed with Certificate or equivalent in related field

from the Institution acknowledged by the University Senate with at least CGPA 3.00

3. Candidates must not be colour blind and physically handicapped which will complicate practical works


DIPLOMA PROGRAM


119


FACULTY OF CIVIL ENGINEERING & EARTH RESOURCESDIPLOMA PROGRAM

CERTIFICATE HOLDER

No.




1.



J2410


1. Fulfill GENERAL UNIVERSITY REQUIREMENTS. 2. Passed with Certificate or equivalent in related field

from the Institution acknowledged by the University Senate with at least CGPA 3.00



120


SPM HOLDER

No.




1. Passed in Sijil Pelajaran Malaysia (SPM) or equivalent with at least FIVE (5) CREDIT (GRADE C ) including Bahasa Melayu


1.



J2410


1. Fulfill GENERAL UNIVERSITY REQUIREMENTS. 2. Credit at least ( Grade C) in the following subjects :

Mathematics, Additional Mathematics, Physics/Chemistry.


subjects:-

• Information Technology Physics Chemistry • Invention • Biology • EngineeringTechnology • Machine/Mechanical Engineering Study • Civil Engineering Study • Electric & Electronic Engineering Study • Technical Drawing


5. Candidates must not be colour blind and physically handicapped which will complicate practical works.


121


SPM HOLDER

No.




1. Passed in Sijil Pelajaran Malaysia (SPM) or equivalent with at least FIVE (5) CREDIT (GRADE C ) including Bahasa Melayu


1.



J2410


1. Fulfill GENERAL UNIVERSITY REQUIREMENTS. 2. Credit at least ( Grade C) in the following subjects :



subjects:-





DEGREE PROGRAM


122


DIPLOMA HOLDER

NO.

Diploma/Equivalent Minimum Requirements (i) Programme Name (ii) Code (iii) Duration of Study




FACULTY MANUFACTURING ENGINEERING

1. B.Eng (Hons.) Manufacturing Engineering JK09 8 Semesters





2.

B.Eng (Hons.) Mechatronic Engineering JK24 8 Semesters

FACULTY OF MANUFACTURING ENGINEERINGDEGREE PROGRAM KPM MATRICULATION/FOUNDATION STUDENT

NO.




Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Science Foundation/ UiTM Science Foundation with at least a CGPA of 2.00; and Obtained at least Band 1 in the Malaysian University English Test (MUET).


1.

B.Eng (Hons.) Manufacturing Engineering JK09 8 Semesters



and

Obtained at least Grade C (2.00) in Matriculation/Foundation level in any two (2) of the following subjects;


Candidates without Physics subject in Matriculation/Foundationl level need to have at least credit in Physics subject in SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

2.



123


DIPLOMA HOLDER

NO.






1. B.Eng (Hons.) Manufacturing Engineering JK09 8 Semesters





2.



NO.






1.




and

Obtained at least Grade C (2.00) in Matriculation/Foundation level in any two (2) of the following subjects;


Candidates without Physics subject in Matriculation/Foundationl level need to have at least credit in Physics subject in SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

2.



124


STPM HOLDER

NO.



Passed the Sijil Pelajaran Malaysia (SPM)/Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed the Sijil Tinggi Pelajaran Malaysia (STPM) with at least a CGPA of 2.00 and:


and


and

Obtained at least Band 1 in the Malaysian University English Test (MUET).


1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least a Grade C (CGPA 2.00) in STPM level for the following subject :


and Obtained at least Grade C (CGPA 2.00) in STPM level for any two (2) of the following subjects;


Candidates without Physics subjects in STPM level need to have at

least credit in Physics subject in SPM level


2.



125


STPM HOLDER

NO.



Passed the Sijil Pelajaran Malaysia (SPM)/Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed the Sijil Tinggi Pelajaran Malaysia (STPM) with at least a CGPA of 2.00 and:


and


and



1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least a Grade C (CGPA 2.00) in STPM level for the following subject :


and Obtained at least Grade C (CGPA 2.00) in STPM level for any two (2) of the following subjects;


Candidates without Physics subjects in STPM level need to have at

least credit in Physics subject in SPM level


2.



DEGREE PROGRAM


126


DIPLOMA HOLDER

NO





1.

B.Eng (Hons.) Mechanical Engineering JK08 8 semester


or Obtain a relevant Diploma from Private Higher Education Institution (IPTS) / Polytechnic with at least CGPA ≥ 3.00



2.

B.Eng (Hons.) Mechanical Engineering with (Automotive) JK40 8 semester

FACULTY OF MECHANICAL ENGINEERINGDEGREE PROGRAM


NO




Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Passed KPM Matriculation/UM Science Foundation/UiTM Science Foundation with at least CGPA of 2.00; and Obtained at least Band 1 in Malaysian University English Test (MUET).


1.




and

Obtained at least Grade C (2.00) in Matriculation/ Foundation level in any two(2) of the following subjects;


Candidates without Physics subject in Matriculation/ Foundation level need to have at least credit in Physics subject in SPM level.

and Candidate must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates from Life Science Stream who do not take Physics at Matriculation/ Foundation level need to take Basic Physics subject at University.

2.



127


DIPLOMA HOLDER

NO





1.






2.



NO




Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Passed KPM Matriculation/UM Science Foundation/UiTM Science Foundation with at least CGPA of 2.00; and Obtained at least Band 1 in Malaysian University English Test (MUET).


1.




and

Obtained at least Grade C (2.00) in Matriculation/ Foundation level in any two(2) of the following subjects;


Candidates without Physics subject in Matriculation/ Foundation level need to have at least credit in Physics subject in SPM level.

and Candidate must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates from Life Science Stream who do not take Physics at Matriculation/ Foundation level need to take Basic Physics subject at University.

2.



128


STPM HOLDER

NO





and


and



1.







and Candidates must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates who do not take Physics at STPM level need to take Basic Physics subject at University.

2.



129


STPM HOLDER

NO





and


and



1.








2.



DIPLOMA PROGRAM


130


CERTIFICATE HOLDER

No.





1. .


Diploma in Mechanical Engineering (5 Semester + 1 Short Semester)

J2430


1. Fulfill GENERAL UNIVERSITY REQUIREMENTS.

2. Passed with Certificate or equivalent in related



FACULTY OF MECHANICAL ENGINEERINGDIPLOMA PROGRAM

SPM HOLDER

No.






1.



J2430



2. Credit at least (Grade C) in the following subjects :



subjects:-


4. Passed at least (GRADE D) in English.



131


CERTIFICATE HOLDER

No.





1. .



J2430






SPM HOLDER

No.






1.



J2430



2. Credit at least (Grade C) in the following subjects :



subjects:-


4. Passed at least (GRADE D) in English.



132



DEGREE PROGRAM

DIPLOMA HOLDER

NO.

Diploma/ Equivalent Minimum Requirements (i) Programme Name (ii) Code (iii) Duration of Study




FACULTY INDUSTRIAL SCIENCES & TECHNOLOGY

1.

Bachelor of Applied Science (Hons) Industrial Chemistry JG04 8 Semesters





2.

Bachelor of Applied Science (Hons) Industrial Biotechnology JG44 8 Semesters

3.

Bachelor of Applied Science (Hons) Materials Technology JG47 8 Semesters


133


FACULTY OF INDUSTRIAL SCIENCES & TECHNOLOGYDEGREE PROGRAM

DIPLOMA HOLDER

NO.

Diploma/ Equivalent Minimum Requirements (i) Programme Name (ii) Code (iii) Duration of Study





1.






2.


3.



134



NO.

KPM Matriculation/Foundation Studies Minimum Requirements (i) Programme Name(ii) Code (iii) Duration of Study


Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with Credit in Bahasa Melayu/ Bahasa Malaysia or Credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Science Foundation / UiTM Science Foundation with at least a CGPA of 2.70; and Obtained at least Band 1 in the Malaysian University English Test (MUET).


1.


Fulfill General University Requirements and

PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) at Matriculation/ Foundation Studies level in the following subjects :

Mathematics / Engineering Mathematics; Chemistry / Engineering Chemistry; OR

Obtain at least a Grade B in Chemistry at SPM level Physics / Engineering Physics / Biology.

and Candidates must not be colour blind and physically handicapped which will complicate practical works.

2. Bachelor of Applied Science (Hons) Industrial Biotechnology JG44 8 Semesters

Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) at Matriculation/ Foundation Studies level in the following subjects :

Mathematics / Engineering Mathematics; Biology; OR

Obtain at least a Grade B in Biology at SPM level Physics / Engineering Physics / Chemistry / Engineering

Chemistry. and Candidates must not be colour blind and physically handicapped which will complicate practical works.

3. Bachelor of Applied Science (Hons) Materials Technology JG47 8 Semesters


Mathematics / Engineering Mathematics; Physics / Engineering Physics; OR

Obtain at least a Grade B in Physics at SPM level Biology / Chemistry / Engineering Chemistry.


STPM HOLDER

NO.

STPM Minimum Requirements (i) Programme Name (ii) Code (iii Duration of Study


Passed Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed Sijil Tinggi Persekolahan Malaysia (STPM) with at least CGPA of 2.70 and:

Grade C (CGPA 2.00) in General Studies;

and


and



1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (CGPA 2.00) at STPM level in the following subjects :

Mathematics T / Further Mathematics T; Chemistry Or Obtain at least a Grade B in Chemisty at SPM level; and Physics / Biology

2.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtain at least Grade C (CGPA 2.00) at STPM level in the following subjects :

Mathematics T / Further Mathematics T; Biology OR Obtain at least a Grade B in Biology at SPM level; and Physics / Chemistry

3.



Mathematics T / Further Mathematics T; Physics OR Obtain at least a Grade B in Physics at SPM level; and Chemistry / Biology

Note : Candidates must not be colour blind and physically handicapped which will complicate practical works


135



NO.

KPM Matriculation/Foundation Studies Minimum Requirements (i) Programme Name(ii) Code (iii) Duration of Study


Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with Credit in Bahasa Melayu/ Bahasa Malaysia or Credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Science Foundation / UiTM Science Foundation with at least a CGPA of 2.70; and Obtained at least Band 1 in the Malaysian University English Test (MUET).


1.



PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) at Matriculation/ Foundation Studies level in the following subjects :

Mathematics / Engineering Mathematics; Chemistry / Engineering Chemistry; OR

Obtain at least a Grade B in Chemistry at SPM level Physics / Engineering Physics / Biology.


2. Bachelor of Applied Science (Hons) Industrial Biotechnology JG44 8 Semesters


Mathematics / Engineering Mathematics; Biology; OR

Obtain at least a Grade B in Biology at SPM level Physics / Engineering Physics / Chemistry / Engineering

Chemistry. and Candidates must not be colour blind and physically handicapped which will complicate practical works.

3. Bachelor of Applied Science (Hons) Materials Technology JG47 8 Semesters


Mathematics / Engineering Mathematics; Physics / Engineering Physics; OR

Obtain at least a Grade B in Physics at SPM level Biology / Chemistry / Engineering Chemistry.


STPM HOLDER

NO.

STPM Minimum Requirements (i) Programme Name (ii) Code (iii Duration of Study


Passed Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed Sijil Tinggi Persekolahan Malaysia (STPM) with at least CGPA of 2.70 and:


and


and



1.



Mathematics T / Further Mathematics T; Chemistry Or Obtain at least a Grade B in Chemisty at SPM level; and Physics / Biology

2.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtain at least Grade C (CGPA 2.00) at STPM level in the following subjects :

Mathematics T / Further Mathematics T; Biology OR Obtain at least a Grade B in Biology at SPM level; and Physics / Chemistry

3.



Mathematics T / Further Mathematics T; Physics OR Obtain at least a Grade B in Physics at SPM level; and Chemistry / Biology

Note : Candidates must not be colour blind and physically handicapped which will complicate practical works


136


DIPLOMA HOLDER

NO





1.

B.Eng (Hons.) Chemical Engineering JK03 8 Semester



or Applications who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.30 and 2 years work experience in related fields can be considered. and Candidates must not be colour blind and physically handicapped which will complicate practical works


2.

Bachelor Of Engineering Technology (Polymer) With Honours. JY 8 Semester





DEGREE PROGRAM


137


DIPLOMA HOLDER

NO





1.




or Applications who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.30 and 2 years work experience in related fields can be considered. and Candidates must not be colour blind and physically handicapped which will complicate practical works


2.





FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERINGDEGREE PROGRAM


138



NO

KPM Matriculation/ Foundation Studies Minimum Requirements



Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Passed KPM Matriculation/UM Science Foundation/UiTM Science Foundation with at least CGPA 2.70; and Obtained at least Band 1 in Malaysian University English Test (MUET).

FACULTY OF CHEMICAL ENGINEERING & NATURAL RESOURCES

1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) in Matriculation/ Foundation Studies level in the following subjects;

Mathematics / Engineering Mathematics; Chemistry / Engineering Chemistry; and Physics / Engineering Physics / Biology.

Candidates without Physics subject in Matriculation/ Foundation level need to have at least credit in Physics subject in SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

2.



Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Passed KPM Matriculation/UM Science Foundation /UiTM Science Foundation with at least CGPA 2.70; and Obtained at least Band 2 in Malaysian University English Test (MUET).

STPM HOLDER

NO



Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Passed Sijil Tinggi Persekolahan Malaysia (STPM) with at least CGPA 2.70 and:


and


and



1.



Mathematics T / Further Mathematics T; Chemistry; and Physics / Biology

Candidates without Physics subject in STPM level need to have at least credit in Physics subject in SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates who do not take Physics at STPM level need to take Basic Physics subject at University.

2.





and


and Obtained at least Band 2 in Malaysian University English Test (MUET).


139



NO




Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Passed KPM Matriculation/UM Science Foundation/UiTM Science Foundation with at least CGPA 2.70; and Obtained at least Band 1 in Malaysian University English Test (MUET).


1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) in Matriculation/ Foundation Studies level in the following subjects;

Mathematics / Engineering Mathematics; Chemistry / Engineering Chemistry; and Physics / Engineering Physics / Biology.

Candidates without Physics subject in Matriculation/ Foundation level need to have at least credit in Physics subject in SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

2.



Passed Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Passed KPM Matriculation/UM Science Foundation /UiTM Science Foundation with at least CGPA 2.70; and Obtained at least Band 2 in Malaysian University English Test (MUET).

STPM HOLDER

NO





and


and



1.



Mathematics T / Further Mathematics T; Chemistry; and Physics / Biology

Candidates without Physics subject in STPM level need to have at least credit in Physics subject in SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works. Note: Candidates who do not take Physics at STPM level need to take Basic Physics subject at University.

2.





and


and Obtained at least Band 2 in Malaysian University English Test (MUET).


140


CERTIFICATE HOLDER

No.




1.


Diploma in Chemical Engineering (Process Plant) (5 Semester + 1 Short Semester)

J2441







DIPLOMA PROGRAM


141


CERTIFICATE HOLDER

No.




1.



J2441






FACULTY OF CHEMICAL & NATURAL RESOURCES ENGINEERINGDIPLOMA PROGRAM


142


SPM HOLDER

No.






1.



J2441




3. Credit at least ONE (1) credit ( Grade C) in the following

subjects:-

• Information Technology • Physics • Chemistry • Invention • Biology • EngineeringTechnology • Mechanical Engineering Study • Electric & Electronic Engineering Study • Technical Drawing

4. Passed at least Pass ( Grade E) in English.


handicapped which will complicate practical works.


143


SPM HOLDER

No.






1.



J2441




3. Credit at least ONE (1) credit ( Grade C) in the following

subjects:-

• Information Technology • Physics • Chemistry • Invention • Biology • EngineeringTechnology • Mechanical Engineering Study • Electric & Electronic Engineering Study • Technical Drawing

4. Passed at least Pass ( Grade E) in English.


handicapped which will complicate practical works.


DEGREE PROGRAM


144


FACULTY OF COMPUTER SYSTEMS & SOFTWARE ENGINEERINGDEGREE PROGRAM

DIPLOMA HOLDER

NO





FACULTY OF COMPUTER SYSTEM & SOFTWARE ENGINEERING

1. Bachelor of Computer Science (Software Engineering) with Honours JC10 8 semester


Or Obtained a relevant Diploma from Private Higher Education Institution (IPTS) / Polytechnic with at least CGPA ≥ 3.00

Or Applications who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.30 and 2 years work experience in related fields can be considered. and Candidates must not be colour blind (only for JC24) and physically handicapped which will complicate practical works


2.

Bachelor of Computer Science (Computer Systems & Networking) with Honours JC11 8 semester

3.

Bachelor of Computer Science (Graphics & Multimedia Technology) with Honours JC24 8 semester


NO




Pass Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Pass KPM Matriculation/UM Science Foundation/UiTM Science Foundation with at least CGPA 2.00; and At least Band 1 in Malaysian University English Test (MUET).


1.

Bachelor of Computer Science (Software Engineering) with Honours JC10 8 semester


Obtained at least Grade C (2.00) in Matriculation/Foundation level in the following subjects;

Mathematics / Engineering Mathematics / Computer Science; OR At least (Grade b) in Additional Mathematics at SPM level

and Candidates should not be colour blind and physicall handicapped which will complicate practical works. (Colour Blind condition is only applicable for Program JC24)

2.


3.



145


DIPLOMA HOLDER

NO






1. Bachelor of Computer Science (Software Engineering) with Honours JC10 8 semester



Or Applications who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.30 and 2 years work experience in related fields can be considered. and Candidates must not be colour blind (only for JC24) and physically handicapped which will complicate practical works


2.


3.



NO




Pass Sijil Pelajaran Malaysia (SPM)/Equivalent with Credit in Bahasa Melayu/Bahasa Malaysia or Credit in Bahasa Melayu/Bahasa Malaysia July Paper; and Pass KPM Matriculation/UM Science Foundation/UiTM Science Foundation with at least CGPA 2.00; and At least Band 1 in Malaysian University English Test (MUET).


1.



Obtained at least Grade C (2.00) in Matriculation/Foundation level in the following subjects;

Mathematics / Engineering Mathematics / Computer Science; OR At least (Grade b) in Additional Mathematics at SPM level

and Candidates should not be colour blind and physicall handicapped which will complicate practical works. (Colour Blind condition is only applicable for Program JC24)

2.


3.



146


STPM HOLDER

NO

STPM Minimum Requirement (i) Programme Name(ii) Code (iii) Duration of Study

General University Requirement



and


and



1.



Mathematics T / Further Mathematics T / Mathematics S / Computing OR

at least ( Grade B ) in Additional Mathematics at SPM level

and Candidates must not be colour blind and physically handicapped which will complicate practical works. (Colour Blind condition is only applicable for Program JC24)

2.


3.



147


STPM HOLDER

NO

STPM Minimum Requirement (i) Programme Name(ii) Code (iii) Duration of Study

General University Requirement



and


and



1.



Mathematics T / Further Mathematics T / Mathematics S / Computing OR

at least ( Grade B ) in Additional Mathematics at SPM level

and Candidates must not be colour blind and physically handicapped which will complicate practical works. (Colour Blind condition is only applicable for Program JC24)

2.


3.



DIPLOMA PROGRAM


148


FACULTY OF COMPUTER SYSTEMS & SOFTWARE ENGINEERINGDIPLOMA PROGRAM

CERTIFICATE HOLDER

No.




1. Passed in Sijil Pelajaran Malaysia (SPM) or equivalent with at least CREDIT (GRADE C) in Bahasa Melayu. Pass at least (Grade E) in Sejarah.

1.


Diploma in Computer Science (5 Semester + 1 Short Semester)

J2810



2. Passed with Certificate or equivalent in related field from the Institution acknowledged by the University Senate with at least CGPA 3.00

2. Credit at least ( Grade C) in English.



SPM HOLDER

No.




1. Passed in Sijil Pelajaran Malaysia (SPM) or equivalent

with at least FIVE (5) CREDIT (C GRADE) including Bahasa Melayu.


1.


Diploma in Computer Science

(5 Semester + 1 Short Semester)

J2810


1. Fulfill GENERAL UNIVERSITY REQUIREMENTS. 2. Credit at least ( Grade C) in Mathematics.

3. credit at least THREE (3) (Grade C) in any subject

4. ONE (1) from the above THREE (3) credit ( Grade C) must be

from the following subjects:

Information Technology & Communication Fundamentals of Programming Programming & Development Tools Multimedia Production Computer Graphic Additional Mathematics Physics Chemistry Biology Additional Science Science Principles of Accounting Basic Economics Commerce Invention Engineering Technology Civil Engineering Studies Mechanical Engineering Studies Electrical & Electronics Engineering Studies Automotive Technology Electronics Technology Building Construction Technology Electrical Technology

5. Credit at least (Grade C) in English.

6. Candidates must not be colour blind and physically handicapped

which will complicate practical works.


149


CERTIFICATE HOLDER

No.




1. Passed in Sijil Pelajaran Malaysia (SPM) or equivalent with at least CREDIT (GRADE C) in Bahasa Melayu. Pass at least (Grade E) in Sejarah.

1.


Diploma in Computer Science (5 Semester + 1 Short Semester)

J2810



2. Passed with Certificate or equivalent in related field from the Institution acknowledged by the University Senate with at least CGPA 3.00

2. Credit at least ( Grade C) in English.



SPM HOLDER

No.




1. Passed in Sijil Pelajaran Malaysia (SPM) or equivalent

with at least FIVE (5) CREDIT (C GRADE) including Bahasa Melayu.


1.


Diploma in Computer Science

(5 Semester + 1 Short Semester)

J2810


1. Fulfill GENERAL UNIVERSITY REQUIREMENTS. 2. Credit at least ( Grade C) in Mathematics.

3. credit at least THREE (3) (Grade C) in any subject

4. ONE (1) from the above THREE (3) credit ( Grade C) must be

from the following subjects:

Information Technology & Communication Fundamentals of Programming Programming & Development Tools Multimedia Production Computer Graphic Additional Mathematics Physics Chemistry Biology Additional Science Science Principles of Accounting Basic Economics Commerce Invention Engineering Technology Civil Engineering Studies Mechanical Engineering Studies Electrical & Electronics Engineering Studies Automotive Technology Electronics Technology Building Construction Technology Electrical Technology

5. Credit at least (Grade C) in English.

6. Candidates must not be colour blind and physically handicapped

which will complicate practical works.


150


DIPLOMA HOLDER

NO.






1.

Bachelor of Engineering Technology (Electrical) with Honours JY30 8 Semesters


Obtained a relevant Diploma from Public Higher Education Institution (IPTA) with at least CGPA ≥ 2.50


or Applications who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.30 and 2 years work experience in related fields can be considered. and Candidates must not be colour blind and physically handicapped that can impair practical works.


2.

Bachelor of Engineering Technology (Energy & Environmental ) with Honours JY56 8 semesters

3.

Bachelor of Engineering Technology (Infrastructure Management) with Honours JY60 8 Semesters

4.

Bachelor of Engineering Technology (Pharmaceutical) with Honours JY70 8 Semesters

5.

Bachelor of Engineering Technology (Manufacturing) with Honours JY90 8 Semesters

6.

Bachelor of Occupational Safety and Health with Honours JP46 8 semesters





DEGREE PROGRAM


151


DIPLOMA HOLDER

NO.






1.



Obtained a relevant Diploma from Public Higher Education Institution (IPTA) with at least CGPA ≥ 2.50


or Applications who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.30 and 2 years work experience in related fields can be considered. and Candidates must not be colour blind and physically handicapped that can impair practical works.


2.


3.


4.


5.


6.





FACULTY OF ENGINEERING TECHNOLOGYDEGREE PROGRAM


152


KPM MATRICALATION/FOUNDATION STUDENT

NO.

KPM Matriculation/Foundation Studies Minimum Requirements (i) Programme Name (ii) Code (iii) Duration of Study


Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Science Foundation/UiTM Science Foundation with at least a CPA of 2.00; and Obtained at least Band 2 in the Malaysian University English Test (MUET).


1.



Mathematics T / Further Mathematics T; Chemistry / Chemistry / Physics;

Candidates without Physics subject in Matriculation/Foundation level need to have at least credit in Physics subject in SPM level; and Candidates must not be colour blind and physically handicapped which will complicate practical works Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

2.


3.


4.


5.


6.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) in Matriculation/ Foundation level in the following subjects;

Mathematics T / Further Mathematics T; Chemistry /physics /Biology.

and Obtained at least credit (Grade C) in SPM level in the following subjects.

Physics; and Chemistry / Biology

and Candidates must not be colour blind and physically handicapped that can impair practical work. and Obtained at least Band 1 in the Malaysian University English Test (MUET).

STPM HOLDER

NO.



Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed Sijil Tinggi Persekolahan Malaysia (STPM) with at least a CPA of 2.00 and with at least:


and


and



1.



PROGRAMME REQUIREMENTS Obtained at least a Grade C (CGPA 2.00) at STPM level in the following subject :

Mathematics T / Further Mathematics T; and Chemistry/ Physics / Biology

Candidates without Physics subject in STPM level should at least credit in Physics in SPM level.


2.


3.


4.


5.



153


KPM MATRICALATION/FOUNDATION STUDENT

NO.

KPM Matriculation/Foundation Studies Minimum Requirements (i) Programme Name (ii) Code (iii) Duration of Study


Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Science Foundation/UiTM Science Foundation with at least a CPA of 2.00; and Obtained at least Band 2 in the Malaysian University English Test (MUET).


1.



Mathematics T / Further Mathematics T; Chemistry / Chemistry / Physics;

Candidates without Physics subject in Matriculation/Foundation level need to have at least credit in Physics subject in SPM level; and Candidates must not be colour blind and physically handicapped which will complicate practical works Note: Candidates from Life Science Stream who do not take Physics at Matriculation/Foundation level need to take Basic Physics subject at University.

2.


3.


4.


5.


6.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) in Matriculation/ Foundation level in the following subjects;

Mathematics T / Further Mathematics T; Chemistry /physics /Biology.

and Obtained at least credit (Grade C) in SPM level in the following subjects.


and Candidates must not be colour blind and physically handicapped that can impair practical work. and Obtained at least Band 1 in the Malaysian University English Test (MUET).

STPM HOLDER

NO.



Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed Sijil Tinggi Persekolahan Malaysia (STPM) with at least a CPA of 2.00 and with at least:


and


and



1.



PROGRAMME REQUIREMENTS Obtained at least a Grade C (CGPA 2.00) at STPM level in the following subject :

Mathematics T / Further Mathematics T; and Chemistry/ Physics / Biology

Candidates without Physics subject in STPM level should at least credit in Physics in SPM level.


2.


3.


4.


5.



154


STPM HOLDER

NO.

STPM Minimum Requirements



Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed the Sijil Tinggi Persekolahan Malaysia (STPM) with at least a CPA of 2.00 and:


and


and



1.



PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) at STPM level in the following subjects;

Mathematics T / Further Mathematics T; Chemistry /Physics /Biology.

and Obtained at least credit (Grade C) at SPM level in the following subjects.




155


STPM HOLDER

NO.

STPM Minimum Requirements



Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed the Sijil Tinggi Persekolahan Malaysia (STPM) with at least a CPA of 2.00 and:


and


and



1.



PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) at STPM level in the following subjects;

Mathematics T / Further Mathematics T; Chemistry /Physics /Biology.

and Obtained at least credit (Grade C) at SPM level in the following subjects.




DEGREE PROGRAM


156


FACULTY OF INDUSTRIAL MANAGEMENTDEGREE PROGRAM

DIPLOMA HOLDER

NO.

Diploma/Equivalent Minimum Requirements (i) Programme Name (ii) Code (iii) Duration of study




FACULTY INDUSTRIAL MANAGEMENT

1.

Bachelor of Project Management with Honours JP45 8 Semesters



Or Applications who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.30 and 2 years work experience in related fields can be considered. and Candidates must not be colour blind and physically handicapped which complicate practical works.


2.

Bachelor of Industrial Technology Management with Honours JP47 8 Semesters


NO.

KPM Matriculation/ Foundation Studies Minimum Requirements (i) Programme Name(ii) Code (iii) Duration of Study




1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least credit (Grade C) in Mathematics at SPM level; and Passed (Gred E) in English Language at SPM level;


2.


3.

Bachelor Of Business Engineering With Honours JP52 8 Semesters


Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Science Foundation / UiTM Science Foundation with at least a CGPA of 3.00; and Obtained at least Band 2 in the Malaysian University English Test (MUET).

Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least C Grade (2.00) at Matriculation/ Foundation level in the following subjects;


Chemistry / Engineering Chemistry Physics / Engineering Physics

and

Candidates must not be colour blind and physically handicapped which will complicate practical works.


157


DIPLOMA HOLDER

NO.

Diploma/Equivalent Minimum Requirements (i) Programme Name (ii) Code (iii) Duration of study





1.




Or Applications who do not obtained CGPA mentioned above, but with at least CGPA ≥ 2.30 and 2 years work experience in related fields can be considered. and Candidates must not be colour blind and physically handicapped which complicate practical works.


2.



NO.

KPM Matriculation/ Foundation Studies Minimum Requirements (i) Programme Name(ii) Code (iii) Duration of Study




1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least credit (Grade C) in Mathematics at SPM level; and Passed (Gred E) in English Language at SPM level;


2.


3.



Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Science Foundation / UiTM Science Foundation with at least a CGPA of 3.00; and Obtained at least Band 2 in the Malaysian University English Test (MUET).

Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least C Grade (2.00) at Matriculation/ Foundation level in the following subjects;



and

Candidates must not be colour blind and physically handicapped which will complicate practical works.


158


STAM HOLDER

NO.

Minimum STAM Requirements (i) Programme Name(ii) Code (iii) Duration of Study


Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and

Obtained at least the rank of Jayyid in the Malaysian Higher Religious Certificate (STAM); and



1.



Own the Sijil Tinggi Agama Malaysia (STAM) with at least the rank of Jayyid.

and

Obtained at least credit (Grade C) in Mathematics at SPM level. and Passed (Gred E) in English Language at SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works.

2.


STPM HOLDER

NO.



Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper. and Passed the Sijil Tinggi Persekolahan Malaysia (STPM) with at least a CGPA of 2.00 and:


and


and Obtained at least Band 1 in the Malaysian University English Test (MUET).


1.



PROGRAMME REQUIREMENTS Obtained at least credit (GRADE C) in Mathematics at SPM level. and Passed (GRADE E) in English Language at SPM level. and Candidates must not be colour blind and physically handicapped which will compractical works.

2.


3.



Passed the Malaysian Education Certificate (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper ;and Pass the Sijil Tinggi Persekolahan Malaysia (STPM) with at least a CPA of 3.00 and:

C Grade (CGPA 2.00) for General Studies subject;

and

C Grade (CGPA 2.00) in two (2) other subjects; and

Obtained at least Band 2 in the Malaysian University English Test (MUET). Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (CGPA 2.00) at STPM level in the following subjects :

Mathematics T / Further Mathematics T; Chemistry Physics

and Candidates must not colour blind and physically handicapped which will complicate practical works.


159


STAM HOLDER

NO.

Minimum STAM Requirements (i) Programme Name(ii) Code (iii) Duration of Study


Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and

Obtained at least the rank of Jayyid in the Malaysian Higher Religious Certificate (STAM); and



1.



Own the Sijil Tinggi Agama Malaysia (STAM) with at least the rank of Jayyid.

and

Obtained at least credit (Grade C) in Mathematics at SPM level. and Passed (Gred E) in English Language at SPM level. and Candidates must not be colour blind and physically handicapped which will complicate practical works.

2.


STPM HOLDER

NO.



Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper. and Passed the Sijil Tinggi Persekolahan Malaysia (STPM) with at least a CGPA of 2.00 and:


and


and Obtained at least Band 1 in the Malaysian University English Test (MUET).


1.



PROGRAMME REQUIREMENTS Obtained at least credit (GRADE C) in Mathematics at SPM level. and Passed (GRADE E) in English Language at SPM level. and Candidates must not be colour blind and physically handicapped which will compractical works.

2.


3.



Passed the Malaysian Education Certificate (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper ;and Pass the Sijil Tinggi Persekolahan Malaysia (STPM) with at least a CPA of 3.00 and:

C Grade (CGPA 2.00) for General Studies subject;

and

C Grade (CGPA 2.00) in two (2) other subjects; and

Obtained at least Band 2 in the Malaysian University English Test (MUET). Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (CGPA 2.00) at STPM level in the following subjects :




160


A-LEVEL HOLDER

NO

A-Level Holder Minimum Requirements (i) Programme Name(ii) Code (iii) Duration of Study


Passed the Malaysian Education Certificate (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper. and Passed the A-Level examination with at least a level 10 and Obtained at least Band 1 in the Malaysian University English Test (MUET) or the equivalent.

1.

B.Eng (Hons.) Mechatronic Engineering - (Collaboration Programme With HsKA, Germany) JK25 9 Semesters


PROGRAMME REQUIREMENTS Obtained at least Grade C (3 Marks) in A-Levels in the following subjects :

Mathematics Chemistry Physics

and Candidates must not be colour blind and pyhsically handicapped which will complicate practical works.

2.

B.Eng (Hons.) Automotive Engineering - (Collaboration Programme With HsKA, Germany) JK71 9 Semesters

3.




COLLABORATION PROGRAMMES


161


COLLABORATION PROGRAMMES

A-LEVEL HOLDER

NO

A-Level Holder Minimum Requirements (i) Programme Name(ii) Code (iii) Duration of Study



1.



PROGRAMME REQUIREMENTS Obtained at least Grade C (3 Marks) in A-Levels in the following subjects :

Mathematics Chemistry Physics

and Candidates must not be colour blind and pyhsically handicapped which will complicate practical works.

2.


3.





162


MATRICULATION /FOUNDATION STUDENT

NO




Passed the Malaysian Education Certificate (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Foundation Science/ UiTM Foundation Science with at least a CPA of 3.50; and


1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) at Matriculation/ Foundation level in the following subjects;




2.


3.



Passed the Malaysian Education Certificate (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Foundation Science/ UiTM Foundation Science with at least a CPA of 3.00; and Obtained at least Band 2 in the Malaysian University English Test (MUET).

STPM HOLDER

NO



Passed the Malaysian Education Certificate (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper. and Passed the Malaysian Higher School Certificate (STPM) with at least a CPA of 3.50 and:


and


and


1.





2.


3.



Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper. and Passed Sijil Tinggi Pelajaran Malaysia (STPM) with at least a CPA of 3.00 and:


and


and



163


MATRICULATION /FOUNDATION STUDENT

NO




Passed the Malaysian Education Certificate (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Foundation Science/ UiTM Foundation Science with at least a CPA of 3.50; and


1.


Fulfill General University Requirements and PROGRAMME REQUIREMENTS Obtained at least Grade C (2.00) at Matriculation/ Foundation level in the following subjects;




2.


3.



Passed the Malaysian Education Certificate (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper; and Passed KPM Matriculation/ UM Foundation Science/ UiTM Foundation Science with at least a CPA of 3.00; and Obtained at least Band 2 in the Malaysian University English Test (MUET).

STPM HOLDER

NO



Passed the Malaysian Education Certificate (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper. and Passed the Malaysian Higher School Certificate (STPM) with at least a CPA of 3.50 and:


and


and


1.





2.


3.



Passed the Sijil Pelajaran Malaysia (SPM)/ Equivalent with credit in Bahasa Melayu/ Bahasa Malaysia or credit in Bahasa Melayu/ Bahasa Malaysia July Paper. and Passed Sijil Tinggi Pelajaran Malaysia (STPM) with at least a CPA of 3.00 and:


and


and



168



UNDERGRADUATE PROSPECTUS 2015-2016 - Official · PDF file106 Entry Requirements Prospectus...

Documents

Transcript of UNDERGRADUATE PROSPECTUS 2015-2016 - Official · PDF file106 Entry Requirements Prospectus...