Type 2237B Controller 4 pages
-
Upload
electronicsandbooks -
Category
Documents
-
view
16 -
download
1
description
Transcript of Type 2237B Controller 4 pages
-
Product Data
Brel
Type 2237B Controller Integrating Sound Level Meter and Hand-Arm Vibration Meter
USES:m Measurement of workers exposure to noise and
hand-arm vibration in the work placem Surveys of environmental noisem Complaint investigationsm Conformance test of power tools
FEATURES:m Sound level meter conforms with: IEC 651 (1979)
and 804 (1985) Type 2; IEC 1672 (Draft, April 1997) Class 2; BS5969 and BS6698 Type 2I; and ANSI S1.4 1983 and Draft S1.43 199X Type 2
m Vibration meter conforms with ISO 8041 Type 2 and ISO 5349
m Measures RMS and Peak values simultaneously and with independent frequency weightings
m Sound level meter measures: Leq, Peak, MaxP, MaxL, MinL, SPL, and Inst
m Vibration meter measures: Aeq, Aeq4, Aeq8, Amax, Amin, Amp, Peak, and Inst
m Hand-arm vibration and linear frequency weightings for vibration measurements
m Included mounting bracket attaches the accelerometer firmly to a tool handle for vibration measurements
m Stores results from up to 40 measurementsm Back-lit displaym Five built-in languages: English, German, French,
Spanish, Italianm Also available as a factory upgrade from a Type
2237 A Controller Integrating Sound Level Meter& Kjr B K7/6-'89
-
2Description
The 2237 B Controller makes indus-trial noise and vibration monitoringeasy. The combined sound and vibra-tion meter functions make it a handyand economcupational
Intuitive UMeasuremelarge LCD which incluthat showssure level.
The cleasymbols on with the lastrument veThe displayinstructionsthrough you
Real-time CThe 2237 Cclock and cameasureme
AC OutputThe linearlyables you torecording (oexample), wcomplete acenables hesound meas
Data StoragThe instrumup to 40 rements andmeasuremerecords). Eameasuremeand all rerameters. Tferred in aformat via face to a Pprinted on
ConvenientThe instrumnication sofunder Wigraphical into download
As a Sou
The Type 2and easy tomental nois
measurements. Its specifications con-form with Type 2 requirements for allnational sound level meter standards.
Dual, Independently Weighted DetectorsThe instrument features two parallel
Dual DetectorsLike the sound level meter function,the vibration meter function featurestwo parallel detectors. This enablesit to display and record both RMSand Peak readings simultaneously. ical choice for general oc-health inspections.
ser-interfacents are displayed on ascreen (with back light),des a quasi-analogue bar the current sound pres-
rly marked arrows andthe front panel, combinedrge screen, make the in-ry easy to learn and use.
is clear and concise. Clear and warnings guide your measurement.
lockontroller has a real-timelendar, which marks eachnt with the date and time.
weighted AC output en- make a direct calibratedn Digital Audio Tape, forhich can be used later foroustical analysis. It alsoadphone monitoring ofurements.
e & Processingent is capable of storing
cords of sound measure- 40 records of vibrationnts (for a total of 80ch record stores the date,nt time, overload status,levant measurement pa-hese results can be trans- spreadsheet-compatiblethe built-in serial inter-C. Results can also be
a portable printer.
Downloadingent comes with commu-
tware that runs on a PCndows. The softwaresterface makes it simple measurement records.
nd Level Meter
237 B Controller is quick use when taking environ-e and occupational health
independently frequency weighteddetectors. This enables it to displayboth RMS and Peak readings simul-taneously.
Fast & Easy Acoustical CalibrationTo calibrate the 2237 B Controller,simply fit an acoustic calibrator tothe instrument and press a button.The sound level meter calculates therequired correction factor and cali-brates automatically.
A Complete Sound PictureDuring measurement, the followingparameters are available on the screen:
m Equivalent constant sound level (Leq)m Maximum peak (MaxP)m Maximum RMS level (MaxL)m Minimum RMS level (MinL)m Maximum peak from last 1s (Peak)m Maximum RMS from last 1 s (SPL)m Instantaneous RMS level (Inst)m Overload status
When the measurement is finished,Leq, MaxP, MaxL, latched overloadstatus, measurement time and themeasurement date are all stored inmemory.
As a Hand-Arm Vibration Meter
Quick to ChangeTo change from a sound level meterto a vibration meter, simply unscrewthe microphone/preamplifier assem-bly and replace it with the acceler-ometer/charge amplifier assembly.The instrument detects the changeautomatically.
Two Frequency WeightingsTwo weightings are available: hand-arm and linear. The hand-arm weigh-ing makes the instrument most sen-sitive to frequencies that most effectthe human body when working withhand-held tools. The linear settingprovides a flat response. The settingyou need may change depending onlocal regulations.
A Complete Vibration PictureDuring measurement, the followingparameters are available on thescreen:
m Equivalent constant acceleration(Aeq)
m Equivalent 8 hour constant expo-sure (Aeq8)
m Equivalent 4 hour constant expo-sure (Aeq4)
m Maximum RMS acceleration(Amax)
m Minimum RMS acceleration (Amin)m Maximum peak acceleration (Amp)m Maximum peak acceleration from
last 1 s (Peak)m Instantaneous RMS acceleration
(Inst)m Overload status
When the measurement is finished,Amp, Aeq, Aeq8, Aeq4, Amax, Amin,latched overload status, measure-ment time and the measurement dateare all stored in memory.
For Sound Only
If you are looking for a Type 2 soundlevel meter only, then ask yourBrel & Kjr dealer about the 2237 AController. It has all the sound meas-urement features of the 2237 B Con-troller, but does not include thevibration measurement capabilities.
For Vibration Only
If you want a hand-arm vibration me-ter alone, ask your Brel & Kjrdealer about the Type 2537. It hasall the vibration monitoring featuresof the Type 2237 B, but does not in-clude the sound level meter function.
-
3GeneralMEMORY:40 Records of Measurement Results
CLOCK:Real-time (calendar) and measurement durationOVERLOAD INDICATION:Instantaneous indication of overload and latchedoverload. Storeoverload indica
AC OUTPUT:Short-circuit proMax. Output: 0Output ResistaOutput: Signal
DISPLAY:4 line back-lit L Input signal
analogue bar Selected par Warnings for Measuring ra Time and fre Elapsed mea Menus for dis Stored meas
BATTERIES:Four 1.5 V LR6Lifetime: > 14 h
SERIAL INTERCompatible with EIA574 EIA232E Baud Rate: 96Data Bits: 8Stop Bit: 1Parity: NoneHandshake: XO
ENVIRONMENStorage Temp.Operating TemMaximum Hum90 % RH at 40Warm-up Time
-
BP 172712 99/11
Ordering Information2237B Controller: Sound Level and Hand-Arm
Vibration MeterIncludes the following accessories:Type 4137 Prepolarized Free-field 1/2
Condenser MicrophoneZC 0027 PreamplifierType 4505: AccelerometerZE 0777: Charge AmplifierDB 3585: Mounting StudType 4137: Prepolarized Free-field 1/2
MicrophoneKE 0323: Shoulder BagUA 1236: Protective Cover4 QB 0013: Four 1.5V LR6/AA Size
Alkaline CellsAO 0038: Low-Noise Cable
Optional Accessories
Type 4231: Sound Level CalibratorType 4226: Multifunction Acoustic
CalibratorType 4294: Vibration Calibration ExciterType 2322: Portable PrinterType 4500: Cubic AccelerometerType 4501: Cubic AccelerometerAO 0283: Super-Low-Noise Teflon
Cable (for Types 4500 and 4501)
AO 0339: Low-Noise Cable (for Types 4500 and 4501)
AO 0403: LEMO to BNC Cable
AO 1242: 9-pole Cable with 25-pole Adaptor (for computer and serial printer)
UA 1251: TripodUA 1254: Microphone Holder (for tripod)UA 0459: Windscreen ( 65 mm)Carrying Case:KE 0325: Carrying Case with insert for
the instrument, Sound Level Calibrator Type 4231, Portable Printer Type 2322 and Tripod UA 1251
Brel&Kjr reserves the right to change specifications and accessories without notice
Type 2237B Controller Integrating Sound Level Meter and Hand-Arm Vibration MeterUSES:FEATURES:DescriptionIntuitive User-interfaceReal-time ClockAC OutputData Storage & ProcessingConvenient Downloading
As a Sound Level MeterDual, Independently Weighted DetectorsFast & Easy Acoustical CalibrationA Complete Sound Picture
As a Hand-Arm Vibration MeterQuick to ChangeTwo Frequency WeightingsDual DetectorsA Complete Vibration Picture
For Sound OnlyFor Vibration Only
Specifications 2237B ControllerOrdering Information