TWGT Woods 2010

catalogTomWishonGolf

TECHNOLOGY

TM

The Leading name in CusTom CLubmaking design

Drivers & Fairway Woods

With their 32mm, shallow face height and 0.830 COR face, the 949MC fairway woods are a good fit for golfers who need a little more help getting the ball well up to fly from a normal fairway lie condition with the highest possible ball speed. Ideal set makeup for skilled golfers is the 949-14° and 18°, while the combination of the 16.5° and 21.5° for the average golfer is optimal.

page 18

For 2010, the stellar performing 915CFE drivers are available in 460cc size Offset 11° and 14° as well as in Left Hand non-offset 11° and 14° lofts. Ideal for golfers who require the most slice reduction in a full round profile shape. Variable thickness, 10-2-3 Beta Titanium forged face allows the 915CFE to deliver outstanding off-center hit forgiveness.

page 17

For tee shots which demand precise accuracy with distance, the high COR 13° loft 525F/D is a specialty design intended to replace a conventional 3-wood off the tee on tight par-4 and par-5 holes. With its 200cc volume and 40mm face height, the 525F/D should only be used for long second shots off the fairway by skilled players who have no trouble getting the ball well up to fly with lower lofts.

page 16

With a classic round shape, sound and impact feel that appeals to better players, the 525GRT Drivers are the ideal fit for golfers who desire a more flat, penetrating trajectory to generate more roll after carry. The more forward center of gravity design makes the 525GRT Drivers the lowest spin fitting option among all TWGT driver designs.

page 16

TWGT offers the perfect combination of >5,000 MOI with maximum 0.830 COR face with a forged, variable thickness face design with medium level spin, all in a pleasing head profile shape for the best of all worlds in driver head design. 919THI is offered in the widest range of fitting options in 8°, 9°, 11°, 13°, 15.5°, 10.5° Draw Bias, 10.5° Draw Bias Plus and LH 11°.

page 14

In response to demand for a driver with the highest possible COR, TWGT has used its vast face design experience to create the 959OL drivers. The 959OL’s large face area pushes the COR close to 0.900 with a new, triple variable thickness design to enhance off center hit performance. Available in 10.5° and 13° High Launch lofts in RH only, the 959OL is a non-conforming design because of its ultra-high COR

page 12

959oldrivers

919thidrivers

525grtdrivers

525f/dfairWay driver

949mcfairWay

Woods

915cfedrivers

fairWay Woods

drivers

10 Woodhead model fitting selectionWoodhead Model Fitting Selection

neW

Wo

od

he

ad

s

The most shallow face (31mm) fairway woods in TWGT’s original design line, the 919THI possess a more elongated face to back dimension to offer a high MOI and match the 919THI drivers. Designed for golfers who want the highest flight with less effort in getting the ball well up from any lie. Available in RH in 14°, 16.5°, 18° and 21.5° lofts.

page 20

Experienced golfers are going to love the classic shape of the new 525GRT fairway woods, combined with a semi-shallow 33mm face height to generate confidence from any fairway lie. A new TWGT face design ensures maximum ball speed to swing speed ratio from a 2-piece investment cast stainless steel design.

page 22

Designed as a perfect match to the Offset and LH model 915CFE Drivers as well as the offset model 919THI Driver, the 915HL fairway woods are designed as a full game improvement wood set for golfers who fade/slice the ball and need help getting the ball well up to fly. Offered in RH in #3, 5, 7, 9, 11 and LH in #3, 5, 7.

page 24

Each 915F/H clubhead is designed with two TWGT weight bores to allow Clubmakers to customize the length and set makeup for each golfer from full fairway wood length to hybrid wood and hybrid iron lengths. As a hybrid club, the 915F/H is for golfers who prefer the look of a forward face progression as per typical fairway woods.

page 25

The absolute best driver choice for men or women golfers with a swing speed lower than 80mph is the 730CL titanium driver. Available in lofts from 15° to 17° through standard spec (16°) and hand select ordering (15° or 17°), the semi-offset hosel and GRT face design ensure slice/fade correction with a consistent high launch angle.

page 26

While intended to match the 730CL driver for swing speeds below 80mph, the 20° and 26° loft 730CL fairway woods can be used by any golfer who likes a slight pear-shape and needs the high launch capability of these two fairway wood designs. Ideal for golfers who struggle to get fairway woods well up in the air to fly from normal fairway grass lies.

page 26

The Future Pro woodheads afford junior golfers a high quality, full stainless steel design in high loft options of #1 (15°), #3 (20°) and #5 (25°), perfect for the young beginning golfer. Lighter headweights with a hosel weight bore in each head allows clubmakers to perfectly customize the Future Pro woods to offer the juniors a proper start to the game.

page 28

11

919thifairWay

Woods

525grtfairWay

Woods

915hlfairWay

Woods

915f/hfairWay hybrids

730cldrivers

730clfairWay

Woods

future proJr. Woodheads

special sets

800.470.0072 • www.wishongolf.com for Serious Clubmakers • www.twgolftech.com for Serious Golfers12

Face Material:

SP700 Titanium

Body Material:

6/4 Titanium

Face Construction:

Forged Triple Variable Thickness

Swingweight Bore:

Yes, 7.5mm diam x 15mm deep

Ferrule Required:

Yes, any 13.0mm OD X 0.335” ID

Hand Select Options:

+/- 1° loft, lie, face angle

+/- 2g headweight

Scorelines:

CNC engraved 0.8mm X 0.35mm

• A brand new ultra-high COR driver design to meet the demands of the many golfers who requested such a design from TWGT

• Full radius round head profile shape with a symmetrical face profile to allow the face design to approach an ultra-high COR of nearly 0.900

• Symmetrical round face profile enhances a new triple variable thickness face to offer incredible off center hit performance

• Reduced rear body wall thickness sections to move the center of gravity closer to the face for low spin to combine with the ultra-high COR for maximum distance

•The959OLdriversarenon-conformingto the USGA Rule for COR – intended for enjoyment only by golfers who do not play competitive events conducted under the USGA Rules of Golf

•Finishedinblackmetallicgloss with satin and contrasting color highlights. Available in 10.5° and 13° lofts in RH

The Highest Possible COR Driver Design for Golfers who Play Purely for Enjoyment. New Triple Variable Thickness Face Design for Incredible Off Center Hit Performance

SPECIFICATIONS – 959Ol DRIVERS

iTem # head Volume Loft Lie Face angle Weight bulge Roll Face Prog. Rh/Lh

959 959-10.5 455cc 10.5° 58° 0 square 198g 13” GRT 18mm RH

959 959-High Launch 455cc 13 58 0.5 hook 198 13 GRT 19 RH

DIMENSIONS – 959Ol DRIVERS

head Face height Face Width Front-back bore diam. hosel od bore depth Face area moi izz

959-10.5 55.5mm 100mm 110mm 0.335” 13.0mm 35mm 5000mm2 4875cm2

959-High Launch 55.5 100 110 0.335 13.0 35 5000 4905

959ol driversneW

13

Wo

od

he

ad

s

959oLdRiVeRs

aVaiLabLe in aPRiL

new forged, cup face, triple variable thickness face design

THE 959OL DOES NOT

CONFORM TO THE USGA

RULE FOR COR


Face Material:

SP700 Titanium

Body Material:

6/4 Titanium

Face Construction:

Forged Variable Thickness

Swingweight Bore:

Yes, 7.5mm diam. X 15mm deep

Ferrule Required:

Yes, any 13.0mm OD X 0.335” ID



+/- 2g headweight

Scorelines:

CNC Engraved 0.8mm X 0.35mm

• Elongated face-to-back dimension increases MOI to >5000 g-cm2 and delivers a more rear CG position for higher launch angle

• New, variable thickness face design ensures the smallest decrease in COR from center to off center hit locations – when you hit the 919THI, you can’t believe how well the face performs

• 48mm rear CG location launches the ball on average, 1/2° to 1° higher than the same loft on the TWGT 915CFE and 525GRT

• 5000 g-cm2 MOI based on 45” assembled length – at shorter lengths, the MOI increases to as high as 5400 g-cm2 (based on 43.5” length)

• Finished in ebony metallic gloss with satin highlights. Available in RH in 8°, 9°, 11°, 13° High Launch 15.5° High Launch Plus and 10.5° Draw Bias, 10.5° Draw Bias Plus; LH in 11°

>5000 g-cm2 High MOI, Variable Thickness Face, Designed with a Pleasing, non-Radical Shape

919THI Titanium Drivers Available in the Widest Range of Fitting Options

SPECIFICATIONS – 919THI DRIVERS


919 919-8 460cc 8° 58° 0 square 203g 13” GRT 17mm RH

919 919-9 460 9 58 0 square 203 13 GRT 18 RH

919 919-11 460 11 58 0.5 hook 203 13 GRT 19 RH

919 919-10.5-DB 460 10.5 58 1.25 hook 203 13 GRT 19 RH

919 919-10.5-DBP 460 10.5 58 3 hook 203 13 GRT 20 RH

919 919-13-HL 460 13 58 0.5 hook 203 13 GRT 20 RH

919 919-15.5-HLP 460 15.5 58 1 hook 203 13 GRT 21 RH

919 919-11 460 11 58 0.5 hook 203 13 GRT 19 LH

DIMENSIONS – 919THI DRIVERS

head Face height Face Width Front-back bore diam. hosel od bore depth Face area moi izz

919-8 53mm 105mm 113mm 0.335” 13mm 35mm 4800mm2 4993cm2

919-9 53 105 113 0.335 13 35 4800 5004

919-11 53 105 113 0.335 13 35 4800 5015

919-10.5-DB 53 105 113 0.335 13 35 4800 5015

919-10.5-DBP 53 105 113 0.335 13 35 4800 5015

919-13-HL 53 105 113 0.335 13 35 4800 5025

919-15.5-HLP 53 105 113 0.335 13 35 4800 5025

919-11 53 105 113 0.335 13 35 4800 5015

919thi drivers

15

Wo

od

he

ad

sneW919Thi dRaW bias PLus For Greater SLiCe

reDuCtion.Available Feb.

16

• ‘Tour Style’ 460cc head shape demonstrates a pleasing balance of face height, breadth and toe to heel length to also contribute to a high MOI

• GRT variable thickness face design ensures a very high smash factor for mis-hits

• At 200cc size with a 39.5mm face height, the forged, high cup face construction ensures a full 0.830 COR for maximum distance

• Designed to be custom built to lengths between 42” and 43.5” for maximum control and accuracy

Featuring a more Forward CG Design for lower Spin

For use on tight holes where distance with accuracy off the tee is required

Face Material:

SP700 Titanium

Body Material:

6/4 Titanium

Face Construction:

Forged + Variable Thickness

Swingweight Bore:

Yes, 7.5mm x 14mm

Ferrule Required:

Yes, any TWGT Wood Ti Ferrule


+1/- 1/2° Loft

+/- 1 Lie and Face Angle

Scorelines: 0.8mm x 0.3mm deep

Face Material:

HS350 High Strength Steel

Body Material:

17-4 Stainless Steel

Face Construction:

Forged Cup Face

Swingweight Bore:

Yes, 7.5mm diam x 15mm

Ferrule Required:

Yes, 7.5mm diam x 15mm



+/- 2g headweight

Scorelines: CNC Machined

0.8mm x 0.4mm

525grt

525f/d

drivers

fairway drivers

SPECIFICATIONS – 525GRT DRIVERS


525 525-9.5 460cc 9.5° 58° 0 square 202g 12” GRT 20mm RH

525 525-11 460cc 11 58 0.5 closed 202 12 GRT 22 RH

DIMENSIONS – 525GRT DRIVERS

head Face hgt. Face Wdth. Front-back bore diam. hosel od bore dpth. Face area

525-9.5 58mm 107mm 110mm 0.335” 13.0mm 35mm 4850mm2

525-11 58 107 110 0.335 13.0 35 4850

SPECIFICATIONS – 525F/D FAIRWAY DRIVERS

iTem # head Vol. Loft Lie Face angle Wgt. bulge Roll Face Prog. Rh/Lh

525F/D-13D 525-13 200cc 13° 58° 0 square 208g 13” GRT 18mm RH

DIMENSIONS – 525F/D FAIRWAY DRIVERS

head Face hgt. Face Wdth. Front-back bore diam. hosel od bore dpth.

525-13 39.5mm 86mm 83mm 0.335” 12.3mm 30mm

17

• Mid- to semi-deep center of gravity position offers normal trajectory for each loft and size

• Forged beta-titanium cup-face construction increases face deflection away from the geometric center of the face for better ball speed on off-center hits

• All 915CFE heads designed with GRT face to ensure consistent launch angle and off-center hit performance

• longer face to back dimension for higher MOI contributes to the off center hit forgiveness of the variable thickness beta-titanium face

915CFE Titanium Drivers in Offset and left Hand Offer High Performance and Full Game Improvement

Face Material:

10V-2Fe-3Al Titanium

Body Material:

6/4 Titanium

Face Construction:

Forged

Swingweight Bore:

Yes, 7.5mm x 15mm

Ferrule Required:

Yes, 13.0 OD x 0.335” ID



+/- 2g weight

Scorelines:

CNC engraved, 0.8mm x 0.4mm

SPECIFICATIONS – 915CFE DRIVERS


915 915-OFF-11 460cc 11° 58° 1 closed 200g 12” GRT 10mm RH

915 915-OFF-14 460 14 58 1 closed 200 12 GRT 11 RH

915 915-LH-11 460 11 58 0.5 closed 200 11 GRT 21 LH

915 915-LH-14 460 14 58 0.5 closed 200 11 GRT 21 LH

DIMENSIONS – 915CFE DRIVERS

head Volume/Loft Face height Face Width Front-back bore diam. hosel od bore depth Face area

915 Offset 460/11 58mm 103mm 110mm 0.335” 13mm 30mm 4450mm2

915 Offset 460/14 58 103 110 0.335 13 30 4450

915 LH 460/11 56 110 110 0.335 13 30 4850

915 LH 460/14 56 110 110 0.335 13 30 4850

915cfe offset rh and non-offset lh driversW

oo

dh

ea

ds

Wo

od

he

ad

s

915CFe non-offset 11° and 14° LH models available

915CFe offset 11° and 14° rH models available


Face Material:

Forged HS300 High Strength Steel

Body Material:


Face Construction:

Forged Cup Face

Swingweight Bore:

Yes, 7.5mm x 14mm

Ferrule Required:

Yes, any TWGT Wood Standard



+/- 2g headweight

Scorelines:

Laser cut, 0.8mm x 0.25mm

SPECIFICATIONS – 949MC FAIRWAY WOODS


949 3-14° 140cc 14° 57° 0 square 208g 13” GRT-0 16mm RH

949 4-16.5° 140 16.5 57.5 0 square 213 13 GRT-0 17.5 RH

949 5-18° 140 18 58 0 square 218 14 GRT-0 19 RH

949 7-21.5° 140 21.5 58.5 0 square 228 14 GRT-0 20.5 RH

DIMENSIONS – 949MC FAIRWAY WOODS

head Face height Face Width Front-back bore diam. hosel od Face Thick.

3-14° 32mm 90mm 79mm 0.335” 12.3mm 1.6mm

4-16.5° 32 90 79 0.335 12.3 1.6

5-18° 32 90 79 0.335 12.3 1.5

7-21.5° 32 90 79 0.335 12.3 1.5

• Designed by loft for custom fairway wood set makeup – available in 14°, 16.5°, 18° and 21.5 lofts. Better players can choose the 14° and 18° while less skilled ball strikers can choose the 16.5° and 21.5° lofts to form their fairway wood set makeup

• Forged cup-face construction is key to achieving the 0.830 COR for maximum ball speed

• Semi-shallow 32mm face height ensures a lower CG for ease in getting the ball well up from all turf conditions

• All new custom formulated high strength steel alloy forged in an incredible 1.6mm thin face allows the 949MC 32mm face height to still achieve a 0.830 COR

• Tapered crown wall thickness design allows more weight to be positioned in the rear center of the body for higher launch angle

Another TWGT Design First – The First Semi-Shallow Face Woods with a 0.830 COR For Distance and High Trajectory Flight

949mc fairway Woods

19

Wo

od

he

ad

s


Face Material:

Carpenter 475 High Strength Steel

Body Material:


Face Construction:

Forged Cup Face

Swingweight Bore:

Yes, 7.5mm diam. X 15mm deep

Ferrule Required:

Yes, any TWGT Wood Standard



+/- 2g headweight

Scorelines:

0.8mm X 0.3mm

• 31mm Shallow Face Design is ideal for golfers who need help getting the ball up to fly, or golfers who play off very tight fairway lies

• Elongated Back Design Shape allows for more rear weighting to increase the MOI and launch angle for high flying trajectory

• Reduced Sole Width Reduces the Sole to Ground Contact for the elongated shape to allow for more consistent, solid contact with the ball

• Designed in 14°, 16.5°, 18° and 21.5° lofts to allow customizing the set makeup – better players may play the 14° and 18° for best results while average to higher handicap golfers are better fit into the 16.5° and 21.5° set makeup

Shallow Face, High MOI, High COR Design for Complete Ease of Total Playability

Designed to match the high MOI performance of the popular 919THI Drivers

SPECIFICATIONS – 919THI FAIRWAY WOODS


919 3-14° 150cc 14° 57° 0 square 210g 14” GRT 14mm RH

919 4-16.5° 145 16.5 57.5 0 square 215 14 GRT 15 RH

919 5-18° 145 18 58 0 square 220 15 GRT 16 RH

919 7-21.5° 140 21.5 58.5 0 square 230 15 GRT 17 RH

DIMENSIONS – 919THI FAIRWAY WOODS

head Face height Face Width Front-back bore diam. hosel od Face Thick.

3-14° 31mm 85mm 87mm 0.335” 12.3mm 2.0mm

4-16.5° 31 85 87 0.335 12.3 2.0

5-18° 31 85 86 0.335 12.3 1.9

7-21.5° 31 85 86 0.335 12.3 1.9

919thi fairway Woods

21

Wo

od

he

ad

s


Face Material:


Body Material:

Investment Cast 17-4 Stainless Steel

Face Construction:

Investment Cast Variable Thickness

Swingweight Bore:

#1 – Hosel Weight Bore – 7.5mm X 15mm

#2 – Sole Weight Bore – 7.5 mm X 15mm

Ferrule Required:

Yes, any TWGT Wood Standard with

12.3mm bottom OD

Hand Select Options for loft:

+/- 1° from each head model’s loft specification

Hand Select Options for Face Angle:

+/- 1° from each head model’s specification

Hand Select Options for Headweight:

+/- 2g from each head model’s specification

Scorelines:

Cast, 0.8mm width X 0.4mm depth

• Classic, Traditional Profile Shape sits perfectly behind the ball for superb appearance and full confidence for the golfer

• Semi-Shallow 32mm Face Height Keeps CG low for ease of hitting the ball high from all fairway lie conditions

• New TWGT Variable Thickness Investment Cast Face proves that a high smash factor can be achieved in a cast 17-4 stainless steel clubhead design

• A Perfect Design Match to the Classic 525GRT Drivers for players who demand the most traditional, full round profile in their woodhead models

• A Second, Sole located Weight Bore to allow custom fitting to a very wide variety of lengths with any shaft weight

• lighter headweights in 18° & 21° heads allows assembly to longer lengths if desired

A Classic, Traditional Profile Combined with a Semi-Shallow Face Height to Deliver High Ball Speed with Ease of Play from all lies

SPECIFICATIONS – 525GRT FAIRWAY WOODS


525 3-14° 145cc 14° 57.5° 0 square 206g 13” GRT-20 15mm RH

525 4-16.5 145 16.5 58 0 square 211 14 GRT-20 16 RH

525 5-18 140 18 58.5 0 square 213 15 GRT-20 17 RH

525 7-21.5 140 21.5 59 0 square 222 16 GRT-20 19 RH

DIMENSIONS – 525GRT FAIRWAY WOODS

head Face height Face Width Front-back bore diam. hosel od bore depth Face Thick.

3-14 32mm 86mm 76mm 0.335” 12.3mm 30mm 2.5mm VT

4-16.5 32 86 76 0.335 12.3 30 2.5mm VT

5-18 32 86 76 0.335 12.3 30 2.5mm VT

7-21.5 32.5 86 76 0.335 12.3 30 2.5mm VT

525grt fairway Woods

23

Wo

od

he

ad

s

2nd Weight Bore

“For an investment cast 17-4 stainless steel

face, you can’t believe how hot the face

plays and feels.”

– Dave Christenson, Rochester, MN

24

• Full Game Improvement Design for golfers who need help getting the ball well up to fly

• Semi-Offset Hosel provides slice correction without looking too offset in the address position

• Semi-Shallow Face Height keeps CG low and inspires confidence to hit the ball high

• Designed to Match with 915CFE Offset and 915CFE Non-offset Left Hand Drivers

Full Game Improvement with Semi-Offset Hosel, Semi-Shallow Face in 3-wood through 11-wood

rH anD LH avaiLaBLe

SPECIFICATIONS – 915Hl FAIRWAY WOODS


915HL–3 3–HL 150cc 15° 57° 0.5° hook 206g 12” 18” 8mm RH/LH

915HL–5 5–HL 150 18.5 57.5 0.5° hook 216 12 18” 8.5 RH/LH

915HL–7 7–HL 145 22 58 0 square 226 12 18” 9 RH/LH

915HL–9 9–HL 140 25.5 58.5 0 square 231 14 18” 9.5 RH

915HL–11 11–HL 135 28.5 59 0 square 236 14 18” 10 RH

DIMENSIONS – 915Hl FAIRWAY WOODS


3–HL 34mm 88mm 85mm 0.335” 12.3mm 28mm 2.5mm

5–HL 34 88 84 0.335 12.3 28 2.5

7–HL 34 88 83 0.335 12.3 28 2.4

9–HL 34 88 82 0.335 12.3 28 2.4

11–HL 34 88 81 0.335 12.3 28 2.4

Face Material: 15-5 Stainless Steel

Body Material: 15-5 Stainless Steel

Face Construction: Investment Cast

Swingweight Bore: Yes

Ferrule Required: Yes, any TWGT wood standard

with 12.3mm bottom OD



+/- 2g weight

Scorelines: 0.8mm wide x 0.4mm deep

915hl fairway Woods

25

• 915F/H Offers Two Weight Bores to enable assembly within a 3” difference for fairway wood or hybrid club lengths

• Full Forward Face Progression design offers the option of a hybrid club that sets up with the look of a fairway wood

• Narrow Sole to Turf Design allows less contact between sole and turf for more consistency from fairway or rough conditions

• Semi-Shallow 33mm Face Height is matched perfectly to the head shape for lower CG and ease of play from any lie condition

915F/H Allows Custom Fitting for Fairway Wood or Hybrid Club lengths

Face Material: 17-4 Stainless Steel

Body Material: 17-4 Stainless Steel

Face Construction: Investment Cast Variable

Swingweight Bore:

Yes, 7.5mm diam. x 14mm

Ferrule Required: Yes, any TWGT wood

standard with 12.3mm bottom OD



+/- 2g weight

Scorelines: 0.8mm x 0.4mm deep

SPECIFICATIONS – 915F/H FAIRWAY HYBRIDS


915F/H–13 13° 130cc 13° 57° 0 square 208g 14” GRT 14mm RH

915F/H–16 16 130 16 57.5 0 square 213 14 GRT 15 RH

915F/H–18.5 18.5 130 18.5 58 0 square 218 15 GRT 16 RH

915F/H–21 21 130 21 58.5 0 square 228 15 GRT 17 RH

915F/H–25 25 130 25 61.5 0 square 232 15 GRT 17 RH

DIMENSIONS – 915F/H FAIRWAY HYBRIDS


13° 33mm 88mm 71mm 0.335” 12.3mm 28mm Variable

16 33 88 71 0.335 12.3 28 Variable

18.5 33 88 71 0.335 12.3 28 Variable

21 33 88 71 0.335 12.3 28 Variable

25 33 88 71 0.335 12.3 28 Variable

915f/h fairway hybrids

2nd WeightBore

Wo

od

he

ad

sW

oo

dh

ea

ds

800.470.0072 • www.wishongolf.com for Serious Clubmakers • www.twgolftech.com for Serious Golfers

26

Ferrule Requirements: 730CL Driver - Any WD-Ti; 730CL Fairways/Hybrids/Irons - Any WD-Std; 730CL Wedges - Any IR

• A Game Improvement Short Set Concept designed expressly for golfers with a driver swing speed of under 80mph

• New for 2010 are 730Cl conventional irons, allowing the slow swing speed golfer to choose between all hybrid body irons or conventional irons to match with the 730 CL woods and wedges

• Matching new more flexible S2S Ruby lite graphite shafts for sub-80mph swing speed golfers, in discrete AA and A flexes (Page 75)

• loft increments are designed at 6° between clubs – perfect for slower swing speed golfers to achieve normal 10-12 yard distance increments between each club

• Available in RH in 16° driver, 20° and 26° fairway woods, 30°, 36°, 42° hybrid irons or 30°, 36°, 42° conventional irons, and 48° and 54° wedges

An Incredibly Popular Full Set Design Expressly for Golfers with an 80mph Swing Speed and lower

SPECIFICATIONS – 730Cl FaiRWay Woods


730 LONG Fairway 130cc 20° 56° 0.5 closed 218g 14” 0 Roll 12mm RH

730 HIGH Fairway 125 26 57 0.5 closed 228 16 0 Roll 12 RH

DIMENSIONS – 730Cl FaiRWay Woodshead Face height Face Width Front-back bore diam. hosel od Face area

LONG Fairway 32.5mm 84mm 64mm 0.335” 12.3mm 2150mm2

HIGH Fairway 32.5 82 61 0.335 12.3 2100

BASIC lENGTH ASSEMBlY

Clubheadmen’s Length

RangeWomen’s Length

Range shaft optionshosel bore

Driver 43” – 44” 42” – 43” S2S Ruby Lite A, AA Wood; 650 A/L Wood 0.335”

Long Fairway 41.5 – 42.5 40.5 – 41.5 S2S Ruby Lite A, AA Wood; 650 A/L Wood 0.335

High Fairway 40 – 41 39.5 – 40.5 S2S Ruby Lite A, AA Wood; 650 A/L Wood 0.335

5-Hybrid Iron 37.5 – 38 36.5 – 37 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

6/7-Hybrid Iron 36.5 – 37 35.5 – 36 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

8/9-Hybrid Iron 35.5 – 36 34.5 – 35 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

5-Iron 37.5 – 38 36.5 – 37 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

6/7-Iron 36.5 – 37 35.5 – 36 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

8/9-Iron 35.5 – 36 34.5 – 35 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

Pitching Wedge 35 – 35.5 34 – 34.5 S2S Ruby Lite A, AA Wedge; 650 A/L Iron 0.370

Dual Wedge 34.5 – 35 33.5 – 34 S2S Ruby Lite A, AA Wedge; 650 A/L Iron 0.370

SPECIFICATIONS – 730Cl dRiVeR


730-1 1-400 400cc 16° 56° 1 closed 205g 13” GRT 17.5mm RH

DIMENSIONS – 730Cl dRiVeR

head Face height Face Width Front-back bore diam. hosel od Face area

1-400 56mm 102mm 106mm 0.335” 13.0mm 4500mm2

730cl set

1w 3w 5w 7w 3 4 5 6 7 8 9 P S

1w LongFwy

HighFwy

5i 6/7 8/9 P D

X X

27

se

ts

neW

730CL intelligent set delivers more driver distance and more functional

distance increments vs conventional set makeup (3 & 4 irons are

unhittable for ≤80mph golfers) STANDARD SET

730CL SET


Head Material- Woodheads:


Head Material- Ironheads:

431 Stainless Steel

Ferrule Required:

Yes, model 124-WD-STD and 124-IR

loft/lie Bending:

Yes, +/- 2 to 3° in any direction

Bore Depth:

30mm in both the Wood and Ironheads

Bore Diameter:

0.335” Woodheads; 0.370” Ironheads

• Future Pro Stainless Steel Wood and Ironheads offer a quality alternative to cheap aluminum and zinc heads at a “parent friendly”, economical price

• Future Pro Wood and Ironheads are Designed with TWGT’s Hosel Weight Bore to allow proper weight fitting – Stainless Steel ironheads are easily bent for junior lie and loft fitting

• Designed Primarily for Junior Players, Ages 6 to 11, with increased loft to ensure early shotmaking success in the game

• Optional Future Pro Steel and Graphite Shafts allow clubmakers a wider range for shaft fitting and price consideration to the parents

• Future Pro Dark Blue Finished Stainless Steel Woodheads Available in #1 (15°), #3 (20°), #5 (25°)

• Mirror Polish Stainless Steel Ironheads Available in #5 (32°), #7 (40°), #9 (48°), DW (54°)

The Future Pro Stainless Steel Clubheads, Graphite and Steel Shafts and Grips Set Quality Standards for Starting Junior Golfers on the Right Path to Playing the Game

SPECIFICATIONS – FUTURE PRO JUNIOR Woodheads

iTem # head Volume Loft Lie Face angle Weight bulge Roll Rh/Lh

805-1 Driver 250cc 15° 52° 0.5 hook 195g 12” 15” RH

805-3 3-wood 130 20 53 0.5 hook 204 14 16 RH

805-5 5-wood 130 25 54 0.5 hook 213 14 16 RH

SPECIFICATIONS – FUTURE PRO JUNIOR gRaPhiTe shaFTs

iTem # model Flex Weight Torque butt diam. Tip diam. Raw Length swing speed

605-JR-Wood Wood Shaft Jr 70g 5.5° 0.500” 0.335” 40” <50mph

605-JR-Iron Iron Shaft Jr 70 5 0.500 0.370 37 <50

SPECIFICATIONS – FUTURE PRO JUNIOR sTeeL shaFTs

iTem # model Flex Weight Torque butt diam. Tip diam. Raw Length swing speed

605-JR-WD-Steel Wood Shaft Jr 90g 3.7° 0.500” 0.335” 40” <50mph

605-JR-IR-Steel Iron Shaft Jr 90 3.3 0.500 0.370 35 <50

future pro Junior set

29

se

ts

note: use any fairway wood headcover

and any hybrid headcovers for the

fairway woodheads

Future Pro Grips available in 0.500” Core in regular and Putter models

Future ProSteel Shafts

Future ProGraphite Shafts

for the Future Pro junior driver

5

about

Compared to all other golf equipment companies, Tom Wishon Golf Technology is a very different company.

We’re not like any of the companies whose golf clubs you see selling in standard form, off the rack, in retail golf stores, pro shops and over the internet. We believe all golf clubs should be custom fit to match each one of the 13 different custom fitting specifications to each golfer’s unique combination of size, strength, athletic ability and swing characteristics.

We’re also not like any of the companies who sell components. We develop and design every one of our original clubhead, shaft and grip models. From our vast experience in golf club R&D, we possess a far deeper understanding of golf club and fitting performance which we openly share with clubmakers. We are also the only company actively promoting the benefits of custom fitting to consumer golfers.

TWGT is committed to creating the highest performing, most innovative clubhead, shaft, and grip designs, backed by the best technical information in the golf industry, to support custom clubmakers who are committed to offering their golfers the very best in professionally custom fit golf clubs.

TWGT is proud of our skills and knowledge in golf equipment design and clubfitting technology which continues to achieve a high level of respect in the world golf industry.

• More than 60 different golf equipment and golf club technology firsts in clubhead design, shaft design, and clubfitting technology.

• The only designer from the custom clubmaking industry whose original clubhead designs have been used to win on the PGA Tour, Champions Tour and in Ryder Cup competition.

• Author of 9 books and hundreds of magazine articles about golf equipment technology and professional clubfitting. Two of our books have won the prestigious “Golf Book of the Year” award from the ING, the golf industry’s largest association of golf media professionals.

• Advisor in golf equipment and clubfitting technology for the professional training programs for numerous PGA organizations

around the world. When some of the major PGA’s in the world want their member professionals to know the truth about golf equipment and clubfitting, they come to TWGT.

• TWGT remains the only supplier of clubheads, shafts and grips to clubmakers who continues to make the effort to promote the benefits of professional clubfitting to consumer golfers. We support custom clubmakers to give them tools to grow their businesses more than any other company.

With the release of our books, The Search for the Perfect Golf Club, The Search for the Perfect Driver, The Right Sticks, and 12 Myths That Could Wreck Your Golf Game, TWGT continues to make golfers aware of the facts of life about their golf clubs – that professionally custom fit golf clubs are the only way any golfer can hope to play to the best of their ability. Clubmakers who use these books to educate their golfers are experiencing an increase in their fitting business.

If you’re not working with TWGT as your clubmaking supplier and clubfitting advisor, you’re missing an opportunity to increase your business by delivering the best performing golf clubs to golfers.

as we said, tWGt is a very different golf company.

ab

ou

t t

Wg

t

TomWishonGolf TECHNOLOGY

TM

tWGt’s r&D Center is the largest and most extensively equipped r&D building in the custom clubmaking industry.

tWgt designs are available from:


TM

USA, CANADA, UK & EUROPE

Tom Wishon Golf Technology

Tel: 800-470-0072 (U.S. & Canada)

Tel: 970-375-0411 (All other countries)

M-F, 8am to 5pm, (MST/MDT)

www.wishongolf.com

AUSTRAlIA

Clubmate Golf Australia Pty. ltd.

Golf Club Components

1/32 Redgum Place

Byron Bay, NSW, Australia

Tel: 61-2-6685 4900

Fax: 61-2-6685 4977

www.clubmate-golf.com.au

email: [email protected]

EUROPE (excluding UK)

Clubmate Golf

Augustinusstrasse 9c

Frechen, Germany D-50226

Tel: 49 2234 93343-3

Fax: 49 2234 93343-55

www.clubmategolf.com


EUROPE FRANCOPHONE

Golf N Swing

10/14 Avenue General LeClerc

78230 Le Pecq (France)

Tel: 33 139 161 860

Web: www.golfnswing.com

Email: [email protected]

UNITED KINGDOM

Diamond Golf International, ltd.

U4/U5 Rudford Estate

Ford Road, Arundel

West Sussex, BN18 0BF, England

Tel: (0) 1903-726 999


GERMANY/AUSTRIA

TCF Golf GBR

Siebenborn 28

Brey/Rhens 56321

Germany

Tel: (49) 674 280 8491

www.tcfgolf.com


MAlAYSIA/SINGAPORE

JNG Malaysia SDN BHD

No. 1; Jalan 3/116D

Kuchai Entrepreneurs Park

Kuala Lumpur, Malaysia 58200

Tel: (60) 37 980 0284

www.jnggolf.com


SOUTH AFRICA

Golf Science Pty ltd

Unit 6, Highway Park

Northgate Estate, Brooklyn

Western Cape, South Africa 7405

Tel: (27) 21 511 9066


tHe LeaDinG name in CuStom CLuBmaKinG DeSiGn

is a registered trademark of Tom Wishon Golf Technology.

©2010 TWGT All rights reserved. All other trademarks belong to their respective owners.

Prices published in the catalog and website do not include shipping and handling, and are U.S. currency prices only. Prices on all products are subject to change without notice and are quoted as FOB from our warehouse in Durango, CO.


TM

TWGT Woods 2010

Documents

Transcript of TWGT Woods 2010