TWGT Irons & Wedges 2010

catalogTomWishonGolf

TECHNOLOGY

TM

The Leading name in CusTom CLubmaking design

Irons & Wedges

800.470.0072 • www.wishongolf.com for Serious Clubmakers • www.twgolftech.com for Serious Golfers34

Head Material:

Investment Cast 431 Stainless Steel

Ferrule Required:

Yes, any IR ferrule with 13.2mm bottom

OD and 0.370” ID

Scorelines:

U-Groove 0.8mm wide x 2.6mm

spacing x 0.35mm deep;

conforms to new USGA scoreline rule

loft/lie Bending:

Yes, +/-2° in any direction

Hosel length: 65mm

Hosel Weight Bore:

7.5mm diam. x 15mm deep

(accepts max 9gram weight)

lower Cavity Weight Bore:

7.5mm diam x 11mm deep

(accepts max 6gram weight)

Bore Depth: 30mm

Bore Diameter: 0.370”

Sole Width Range:

#3–5 - 20mm/22mm/17.5mm

#6–8 - 20.5mm/22.5mm/17.5mm

#9–wedges - 21mm/23mm/18mm

Toe/Heel leading Edge Radius:

#3–8 - 250mm

#9, PW, AW - 275mm

#SW - 300mm

Face-Back Sole Radius:

#3–6 - 60mm/50mm

#7–AW - 70mm/60mm

#SW - 90mm/80mm

SPECIFICATIONS – 979SS IRONS

iTem # head Loft Lie Weight offset sole angle Toe height heel height blade Length Rh/Lh

979-3 3-iron 20° 59° 238g 3.5mm 2° B 50mm 31mm 82mm RH

979-4 4-iron 23 60 245 3 2 51.5 32 82 RH

979-5 5-iron 26 61 252 2.5 2 53 33 82 RH

979-6 6-iron 30 61.5 259 2.5 2.5 55 34 82 RH

979-7 7-iron 34 62 266 2.5 3 56.5 35 82 RH

979-8 8-iron 38 63 273 2 3 57 35.5 82 RH

979-9 9-iron 42 64 280 2 4 58 36.5 82 RH

979-PW PW 46 64 282 2 5 59 38 82 RH

979-AW AW 50 64 282 2 5 59 38 82 RH

979-SW SW 55 64 298 2 11 60 39 82 RH

979ss irons

• Progressive blade height design graduates through the set from semi-shallow low CG on the long irons to conventional blade height on the short irons for smart set game improvement

• CNC milled face with NEW USGA conforming scorelines delivers enhanced spin

• Semi-Wide, symmetrical width sole design with face-to-back radius and blunt leading edge achieves the most game improvement for clean, solid contact through all grass/turf conditions

• Undercut back cavity combines with semi-wide sole to keep CG lower for more game improvement launch angle assistance

• Twin Weight Bores allow for a maximum headweight addition of 15g to satisfy any combination of custom length and shaft weight fitting considerations

• Precision investment cast from 431 stainless steel for ease in loft/lie bending, finished in a bright satin finish with attractive cosmetic highlights. Available in RH in #3-PW, AW, SW

An Original Game Improvement Investment Cast Stainless Iron Design with High MOI, Progressive Blade Height, Semi-Wide Sole and CNC Milled Face with NEW USGA Scorelines

neW

35

hy

br

ids

& ir

on

he

ad

s

tWGt achieves another design breakthrough with the first full set of irons with all milled faces for spin enhancement

Deep undercut back cavity design pushes mass down to lower the Center of Gravity more

2nd Weight Bore


Head/Body Material:

Investment Cast, Annealed Hosel,

17-4 Stainless

Face Material:

SP700 Forged Beta Titanium

Ferrule Required:

Yes, any IR ferrule with 13.2mm bottom OD

Scorelines:

U-Groove; 0.75mm wide X 0.4mm deep X

2.6mm spacing, CNC machined

loft/lie Bending:

Yes, but we do not recommend

bending more than +/-2° for loft or lie

Hosel length: 65mm

Bore Depth:

30mm

Bore Diameter: 0.370” parallel

Sole Width Range at Toe/Heel:

#4-iron: 19mm/15.5mm;

#7-iron: 19.5mm/15.5mm;

PW: 20mm/16mm


#4-AW: 275mm Radius

Face to Back Sole Radius:

40mm Toe/50mm Heel

• Forged, CNC Machined, Variable Thickness Beta-Titanium Face Design increases the ball speed to the highest possible level for an iron design – higher than the 770CFE which proved a high COR iron was possible

• Thinner, Beta-Titanium Face Design allows even more weight to be removed from the face than is possible with a 6/4 Ti face to be positioned on the toe and heel areas to increase the MOI of the head for even better off-center hit performance

• Slightly Oversize Head Shape and Profile automatically increases the MOI over more traditional iron head sizes to add even more to the off-center hit capability of the 870Ti

• 870Ti Face Profile Allows a larger Face Area to increase size of the Beta-Ti face and the ability of the face to flex more to offer a higher COR for the highest possible ball velocity in an iron design

• Reduced-Offset Hosel Design allows a wider range of players to benefit from the super high performance design characteristics of the 870Ti

• Fully Radiused Sole Grind with Beveled leading Edge provides the most playability for all levels of golfers from all types of turf conditions

The Ultimate in High Performance, High Ball Speed, Supreme Off-Center Hit Forgiveness in Iron Design Today

SPECIFICATIONS – 870Ti IRONS

iTem # head Loft Lie Weight offset sole angle Toe hgt. heel hgt. blade Length Rh/Lh

870-3 3-iron 20° 59° 238g 3.5mm 3° 54mm 32mm 82mm RH

870-4 4-iron 23 60 245 3.5 3 55 33 82 RH

870-5 5-iron 26.5 61 252 3.5 3 56 33.5 82 RH

870-6 6-iron 30 61.5 259 3 3 57 34 82 RH

870-7 7-iron 34 62 266 3 4 58 34.5 82 RH

870-8 8-iron 38 63 273 2.5 4 59 35.5 82 RH

870-9 9-iron 43 64 280 2.5 4 60 36 82 RH

870-PW PW 48 64 283 2 5 60 37 82 RH

870-AW AW 52 64 283 2 5 60 37 82 RH

870-SW SW 56 65 297 2 10 61 38 82 RH

870ti irons

neW

37

hy

br

ids

& ir

on

he

ad

s

870ti ironheads perform well with S2S White,

Gold 85 & Black 85 iron shafts

neW870ti 3-iron

is a superbdriving iron

870ti 5-iron 870ti 5-iron


Head/Body Material:

Investment cast from 17-4 Stainless Steel

Face Material:

#3-7: Carpenter 455 HS Steel;

#8-SW: 17-7 Stainless Steel

Ferrule Required:

Yes, IR ferrule with 13.2mm bottom OD

Scorelines: U-groove; 0.8mm wide X

2.8mm spacing X 0.4mm deep,

CNC Machined

loft/lie Bending:

Yes, but we do not recommend bending

more than 2º in any direction

Hosel length:

65mm

Bore Depth:

30mm; TWGT Weight Bore in all

770 heads for final weighting

Bore Diameter:

0.370” parallel

Sole Width Range:

#3-iron: 19mm/16mm;

#6-iron: 21mm/17mm;

#9-iron: 21mm/17mm

Toe to Heel Sole Radius:

#3–PW = 350mm; SW = 250mm


#3–6 = 50mm; #7–9 = 60mm;

PW = 70mm; AW = 70mm; SW = 80mm

• High COR Thin Face Design delivers higher ball speed for more distance

• Variable Thickness, CNC Machined Forged Faces use two different steel alloys through the set to match the face flexing to the loft of each iron in the set

• Deep, 3-Side Undercut Back Cavity moves the CG well back from the face to increase launch angle for high, soft landing shots

• High MOI from the 2-Piece Head Construction adds to the high COR face design to ensure off-center hit performance you have to experience to believe

• Progressive lower Back Weighting allows CG to be lower and farther back on the lower loft irons for higher flight, removed on short irons for normal flight

Variable Thickness, CNC Machined Forged Face Design Increases the COR and Delivers Incredible Off-Center Hit Performance

SPECIFICATIONS – 770CFE IRONS


770-3 3-iron 21° 59° 239g 5mm 1° 58mm 33mm 82mm RH

770-4 4-iron 24 60 246 5 1.5 59 33.5 82 RH/LH

770-5 5-iron 27 61 253 5 2 60 34 82 RH/LH

770-6 6-iron 31 62 260 4.5 2.5 60 34 82 RH/LH

770-7 7-iron 35 63 267 4 3 60.5 34.5 82 RH/LH

770-8 8-iron 39 63.5 274 4 3.5 61 35.5 82 RH/LH

770-9 9-iron 44 64 281 4 4 62 36 82 RH/LH

770-PW PW 49 64 283 4 4 62 37 82 RH/LH

770-AW AW 52 64 283 4 5 62 37 82 RH

770-SW SW 55 64 297 3 11 63 39 82 RH

770cfe irons

39

hy

br

ids

& ir

on

he

ad

s

Precision CnC milled thin face for higher Cor 770CFe

5-iron

770CFe

5-iron

770CFe

9-iron


Head/Body Material:

Investment Cast from

431 Annealed Stainless Steel

Ferrule Required:

Yes, any TWGT IR ferrule with a

13.2mm bottom OD

Scorelines: U-groove

loft/lie Bending:


more than +/-2° loft & lie

Hosel length: 60mm

Bore Depth:

30mm on all 752 O/S ironheads

Bore Diameter:

0.370” parallel

Sole Width Range Toe/Heel:

#23° loft iron: 18mm/14.5mm;

#35° loft iron: 19mm/15.5mm;

#49° loft iron: 20mm/17mm


#23° – #35° = 50mm;

#39° – #54° = 60mm

•Each752O/SIronheadisSoldbyLoftNumberand is shipped with two sole number medallions for the clubmaker or golfer to choose what iron head number they wish to permanently install in the sole

•The752O/SCustomIronheadNumberingConcept allows clubmakers to compete more effectively with iron models that are made with very low lofts per ironhead number. Clubmakers have the choice of using the lower sole number medallion on each head to create a more “traditionally lofted set” or to use the higher sole number medallion on each head to custom build a very strong lofted set to compete with the irons that some companies are making with very low lofts

•BeveledLeadingandTrailingEdgeSoleGrind with tour grind face to back sole radius allows fewer “fat shots” and more consistent play from tall grass

•Full,DeepBackCavityDesign combines with the slightly oversize head shape to offer a high MOI for better off-center shot forgiveness

•SecondWeightBoreonLowerCavityBackpad allows addition of up to 18 grams of weight for the widest possible range in fitting for CG, length, shaft weight and swingweight/MOI matching

A Totally Unique Oversize, Game Improvement Iron to Allow Clubmakers to Custom Fit the Head Numbers to Compete with the Golf Industry’s Practice of Continually Reducing the loft of Irons

SPECIFICATIONS – O/S 752 IRONS


OS752-23 4 or 5-iron 23° 60° 247g 3.5mm 3° 59mm 35.5mm 81mm RH

OS752-27 5 or 6-iron 27 61 254 3 3 59.5 36 81 RH

OS752-31 6 or 7-iron 31 62 261 3 4 60 36.5 81 RH

OS752-35 7 or 8-iron 35 63 268 2.5 4 60.5 37 81 RH

OS752-39 8 or 9-iron 39 64 275 2.5 4 61 38 81 RH

OS752-44 9-iron or PW 44 65 280 2 5 61.5 38.5 81 RH

OS752-49 PW or AW 49 65 280 2 6 61.5 39 81 RH

OS752-54 SW 54 65 295 2 11 62 40 81 RH

note: twin Weight Bore Design on each o/S 752 head allows assembly to normal swingweights ormoi ranges for each head number listed for each head model.

o/s752 irons

o/s 752 head Loftsole number

medallions included

OS752-23 23° #4 and #5

OS752-27 27° #5 and #6

OS752-31 31° #6 and #7

OS752-35 35° #7 and #8

OS752-39 39° #8 and #9

OS752-44 44° #9 and #PW

OS752-49 49° #PW and #AW

OS752-54 54° #SW

41

hy

br

ids

& ir

on

he

ad

s

752 o/S is designed to allow you to choose the iron head number for each club from a

choice of two iron numbers

o/S 752

5-iron

o/S 752

5-iron


Head/Body Material:

Investment cast from 431 Stainless Steel

Ferrule Required:

Yes, any IR ferrule with 13.2mm bottom OD

Scorelines: U-Groove, 0.8mm wide X

2.8mm spacing X 0.4mm deep

loft/lie Bending:

Yes, but we do not recommend

bending more than 3º in any direction

Bore Depth:

30mm on all 752TC ironheads;

TWGT Weight Bore in all 752TC heads

for final swingweighting

Hosel length: 60mm


Sole Width Range:

#3-iron: 17.5/16/13.5;

#6-iron: 18/16.5/14;

#9-iron: 19.5/18/15


#3–6 = 50mm; #7–PW = 60mm;

#AW, SW = 70m


#3–7 = 300mm;

#8–SW = 350mm

• Beveled leading/Trailing Edge Sole with face to back radius affords fewer ‘fat’ shots and easier play from the rough

• Classic, Compact, Traditional Shape and Profile is blended well with the deep cavity back, full game improvement features on each head

• Angled Back Cavity Side Walls for higher MOI delivers very solid off-center feel performance

• Progressive lower Back Weighting allows CG to be lower and farther back on the lower loft irons for higher flight, removed on short irons for normal flight

• Brilliant, Mirror Polish Finish with matte finish bead blast back cavity

• Set Make Up Available: RH #3–9, PW, AW, SW LH #3–9, PW, SW

Compact, Traditional Head Shape and Profile in a Deep Cavity Back, Full Game Improvement Iron Design

SPECIFICATIONS – 752TC IRONS


752-3 3-iron 21° 60° 239g 5.5mm 1° 55mm 34mm 79mm RH/LH

752-4 4-iron 24 60.5 246 5 1 56 34.5 79 RH/LH

752-5 5-iron 27 61 253 4.5 2 57 35.5 79 RH/LH

752-6 6-iron 31 61.5 260 4 2 57.5 36 79 RH/LH

752-7 7-iron 35 62 267 3.5 2 58 36.5 79 RH/LH

752-8 8-iron 39 62.5 274 3.0 3 59 37 79 RH/LH

752-9 9-iron 43 63 281 2.5 3 59.5 37.5 79 RH/LH

752-PW PW 47 63.5 284 2.5 5 60 38 79 RH/LH

752-AW AW 52 64 284 2.5 5 61 38.5 79 RH

752-SW SW 56 65 298 2 12 62 39 79 RH/LH

752tc irons

43

hy

br

ids

& ir

on

he

ad

s

752tC 6-iron752tC 7-iron 752tC 6-iron

“the fact that the 752tC irons have been a part of the tWGt original

design line since 2005 is sheer proof of how many golfers have been

pleased with this design for so long.”

– Matt Mohi, Lead Clubfitter, TWGT


Head Material:

Forged 1035C Carbon Steel

Ferrule Required:

Yes, model #125-IR

Scorelines:

U-groove; 0.8mm wide X 2.6mm spacing X

0.4mm deep, CNC Machined

loft/lie Bending:

Yes, +/-2º in any direction

Hosel length: 60mm

Hosel Weight Bore:

Yes, 7.5mm dia. x 15mm deep

Bore Depth: 30mm

Bore Diameter: 0.370”

Sole Width Range:

#3-iron: 17.5/19.5/14.5;

#6-iron: 17.5/18.5/14.5;

#9-iron: 21/18.5/15;


50mm toe/40mm heel all irons


#4–9 iron- 300mm radius

PW, AW- 350mm radius

• A True Design Technology Advancement – creating the entire back cavity by CNC machining results in a much higher MOI for superb off-center hit performance with the soft feel of a forged carbon steel iron

• True Tour Radiused Sole perfectly blends a face to back sole radius with a heavily radiused leading edge for reducing ‘fat’ shots and more solid impact from the rough

• Very Slightly larger Head Size contributes to the much higher MOI and more confidence without looking too large

• Middle Handicap Players can Benefit from the 560MC Forging thanks to the combination of deep cavity, high MOI and tour radiused sole

• Double Nickel Chrome Satin Plating finish with glass bead blast highlights makes the 560MC a truly gorgeous iron design

Forged Carbon Steel + CNC Machined Deep Back Cavity for the Highest MOI in a True Forged Iron Design

SPECIFICATIONS – 752TC IRONS


560-3 3-iron 21° 59° 240g 2.5mm 2° 55mm 30.5mm 82mm RH

560-4 4-iron 24 60 247 2.5 2 56 31 82 RH

560-5 5-iron 27 61 254 2 2 57 32 82 RH

560-6 6-iron 31 61.5 261 2 2 57.5 33 82 RH

560-7 7-iron 35 62 268 2 2 58 34 82 RH

560-8 8-iron 39 63 275 2 3 59 35 82 RH

560-9 9-iron 43 64 282 2 3 59.5 36 82 RH

560-PW PW 47.5 64 285 1.5 5 60 38 82 RH

560-AW AW 52 64 285 1.5 5 60 38 82 RH

560mc forged irons

“now that the 560’s have been out for a few years, based on the comments of

clubmakers and golfers combined with my own feelings from having personally

played them for the past three years, i do believe the 560mc is the finest iron

model i have ever had the pleasure of designing.”

–Tom Wishon

45

hy

br

ids

& ir

on

he

ad

s

560mC 5-iron560mC 5-iron 560mC 5-ironneWusga

ConFoRming sCoReLine

verSion avaiLaBLe!


Head Material:

True Billet Forged from

1035C carbon steel, with

double nickel/chromium electroplating

Ferrule Required:

Yes, model #125-IR

Scorelines: U-Groove;

0.8mm wide x 2.6mm

loft/lie Bending:



Hosel Weight Bore:

Yes, 7.5mm dia X 15mm deep

Bore Depth: 30mm


Sole Width Range:

#3-iron: 18.5/17/13.5;

#6-iron: 18.5/17.5/14.5;

#9-iron: 19.5/19/15.5


#2–7 = 40mm/30mm;

#8–PW = 50mm/40mm;

#SW = 60mm/50mm


#2–7 = 350mm;

#8–PW = 300mm

#SW = 275mm

• A Beautiful, Classic Forged Design created as a design improvement from the former 550C forged irons

• Full Face to Back Radius Sole with heavily radiused leading edge to deliver more shotmaking consistency from lies in the fairway and rough

• Thin topline, low Offset and Classic Players’ Shape make the 555C a design admired by all discerning golfers

• True Forged from 1035 Soft Carbon Steel through a 5-step forging process which affords greater production shape/grind consistency

• 555C are Designed to Match Perfectly with the 555M for true custom mixed set makeup

• New Satin Nickel Chrome Plating Finish with glass bead blast highlights, offered in 555C cavity back in #2-PW, AW, SW

Soft Feel, Forged Carbon Steel Cavity and Muscleback Classic Design with TWGT Custom Sole Grind

SPECIFICATIONS – 555C IRONS


555C 2-iron 18° 58° 232g 3.5mm 1° 52mm 30.5mm 79mm RH

555C 3-iron 21 59 239 3.5 1 53 31 79 RH

555C 4-iron 24 60 246 3 2 54 32 79 RH

555C 5-iron 28 61 253 3 2 55 33 79 RH

555C 6-iron 32 61.5 260 2.5 2 56 34 79 RH

555C 7-iron 36 62 267 2.5 2 57 35 79 RH

555C 8-iron 40 63 274 2 3 58 36 79 RH

555C 9-iron 44 64 281 2 3 59 37 79 RH

555C PW 48 64 285 2 4 60 38 79 RH

555C AW 52 64 284 2 5 60 38 79 RH

555C SW 55 64 296 2 11 61 39 79 RH

555c forged irons

47

hy

br

ids

& ir

on

he

ad

s

555C 6-iron555C 8-iron 555C 6-ironneWusga


verSion avaiLaBLe!


Head Material:

True Billet Forged from

1035C carbon steel, with

double nickel/chromium electroplating

Ferrule Required:

Yes, model #125-IR

Scorelines: U-Groove;

0.8mm wide x 2.6mm

loft/lie Bending:



Hosel Weight Bore:

Yes, 7.5mm dia X 15mm deep

Bore Depth: 30mm


Sole Width Range:

#3-iron: 16/15.5/12.5;

#6-iron: 16.5/16/13.5;

#9-iron: 17.5/17/14.5

Front to Back Sole Radius:

#3–7 = 30mm/20mm;

#8–PW = 40mm/30mm;

#SW = 50mm/40mm


#3–7 = 350mm;

#8–PW = 300mm

#SW = 275mm

• A Beautiful, Classic Forged Design developed as an improvement from the former 550M forged irons

• Full Face to Back Radius Sole with heavily radiused leading edge to deliver more shotmaking consistency from lies in the fairway and rough

• Thin topline, low Offset and Classic Players’ Shape make the 555M a design admired by all discerning golfers

• True Forged from 1035 Soft Carbon Steel through a 5-step forging process which affords greater production shape/grind consistency

• 555M are Designed to Match Perfectly with the 555C for true custom mixed set makeup

• Satin Nickel Chrome Plating Finish with glass bead blast highlights, offered in 555M muscleback in #2-PW, AW, SW

Soft Feel, Forged Carbon Steel Cavity and Muscleback Classic Design with TWGT Custom Sole Grind

SPECIFICATIONS – 555M IRONS


555M 3-iron 21° 59° 239g 3.5mm 1° 53mm 31mm 78mm RH

555M 4-iron 24 60 246 3 2 54 32 78 RH

555M 5-iron 28 61 253 3 2 55 33 78 RH

555M 6-iron 32 61.5 260 2.5 2 56 34 78 RH

555M 7-iron 36 62 267 2.5 2 57 35 78 RH

555M 8-iron 40 63 274 2 3 58 36 78 RH

555M 9-iron 44 64 281 2 3 59 37 78 RH

555M PW 48 64 285 2 4 60 38 78 RH

555M AW 52 64 284 2 5 60 38 78 RH

555M SW 55 64 296 2 11 61 39 78 RH

555m forged irons

49

hy

br

ids

& ir

on

he

ad

s

555m 6-iron555m 6-iron 555m 6-ironneWusga


verSion avaiLaBLe!

50

• Traditional Sole, Classic Shape/Profile stands as the finest overall shape and set-up behind the ball in a TWGT original wedge design

• CNC Milled Face with Micro-Groove™ Scorelines to fully maximize every golfer’s ability to spin the ball. Tests with Trackman™ launch monitor verify a 1000 rpm increase in spin rate compared to typical U-groove scorelines on bead blast face

• Zero-Bounce Grind Heel ensures the leading edge remains low to the ground when the face is rolled open for finesse shots

• Available in Satin Chrome & Platinum Nickel Plating Finishes, with an assortment of models in LH

TWGT’s Traditional Sole Wedge Design with Milled Face and Micro-Groove™ Scorelines, Destined to Become a Classic

SPECIFICATIONS – PCF MICRO TOUR TRADITIONAl SOlE WEDGES

iTem # head Loft Lie Weight offset sole angle*

Toe height

heel height

blade Length

sole Widtht/H/C

sole Radiust/H Rh/Lh

307-48 PW 48° 64° 284g 2mm 4°/0° 58.5mm 35mm 80mm 18mm/19mm/14mm 275mm R RH

307-52 AW 52 64 284 2 5/0 59 35.5 80 18/19/14 275 RH/LH

307-56 SW 56 64 300 2 12/0 59.5 36 80 19/20/14.5 250 RH/LH

307-58 SW/LW 58 64 300 2 11/0 59.5 36 80 19/20/14.5 250 RH

307-60 SW/LW 60 64 295 2 8/0 59.5 36 80 19/20/14.5 250 RH

*note: First number is the primary sole angle. Second number is the zero-bounce grind sole on the heel side.

SPECIFICATIONS – PCF WIDE SOlE WEDGES

iTem # head Loft Lie Weight offset sole angle

Toeheight

heel height

blade Length

sole Widtht/H/C

sole Radiust/H Rh/Lh

306WS-55 SW 55° 64° 300g 2mm 5° 58.5mm 35mm 80mm 18mm/19mm/14mm 275mm R RH

306WS-60 SW/LW 60 64 298 2 3 59.5 36 80 19/20/14.5 250 RH

pcf micro tour Wedges

CnC milling with

micro-Groove™ Scorelines

Zero BounceHeel - PCF microtour Wedges

PCF micro tourWedges in Satin Chrome

PCF micro tourWedges in Platinum nickel

51

OPTIONS & SPECIFICATIONS – STEEl WEDGE SHAFTS

iTem # description butt dia. Tip dia. Wgt Length Tip

Trimbutt Trim

605-WG-KD Knock DownWedge Shaft 0.580” 0.370” 105g 36” 0” To length

605-WG-HF High FlightWedge Shaft 0.580 0.370 105 36 0 To length

Head Material:

Investment Cast 304 Stainless Steel

Ferrule Required: Yes, any iron ferrule

with 13.2mm bottom OD

Scorelines: Micro-Groove™ U-shaped,

0.6mm x 2.0mm x 0.4mm;

CNC Machined

loft/lie Bending: Yes, +/-4º loft or lie

Weight Bore: Yes,

7.5mm dia. x 15mm deep

Bore Depth: 35mm

leading Edge:

Heavily Radiused Face over to Sole

• TWGT has Created a Pair of Custom Designed Steel Wedge Shafts For Golfers Who Desire a Custom Flight and Feel Option in Their Wedges

• High Flight wedge shaft is designed with a longer tip parallel section to allow a slightly higher, softer landing shot into the green

• Knock Down wedge shaft is designed with a very short parallel tip section to restrict the bending of the tip to allow golfers to hit knock-down shots with a firmer feel on a more driving accurate trajectory

TWGT WEDGE SHAFTS

pcf Wide sole WedgesW

ed

ge

s

PCF Wide SoleWedge inPlatinum nickel

PCF Wide SoleWedge inSatin Chrome

PCF Wide SoleWedges

800.470.0072 • www.wishongolf.com for Serious Clubmakers • www.twgolftech.com for Serious Golfers

26

Ferrule Requirements: 730CL Driver - Any WD-Ti; 730CL Fairways/Hybrids/Irons - Any WD-Std; 730CL Wedges - Any IR

• A Game Improvement Short Set Concept designed expressly for golfers with a driver swing speed of under 80mph

• New for 2010 are 730Cl conventional irons, allowing the slow swing speed golfer to choose between all hybrid body irons or conventional irons to match with the 730 CL woods and wedges

• Matching new more flexible S2S Ruby lite graphite shafts for sub-80mph swing speed golfers, in discrete AA and A flexes (Page 75)

• loft increments are designed at 6° between clubs – perfect for slower swing speed golfers to achieve normal 10-12 yard distance increments between each club

• Available in RH in 16° driver, 20° and 26° fairway woods, 30°, 36°, 42° hybrid irons or 30°, 36°, 42° conventional irons, and 48° and 54° wedges

An Incredibly Popular Full Set Design Expressly for Golfers with an 80mph Swing Speed and lower

BASIC lENGTH ASSEMBlY

Clubheadmen’s Length

RangeWomen’s Length

Range shaft optionshosel bore

Driver 43” – 44” 42” – 43” S2S Ruby Lite A, AA Wood; 650 A/L Wood 0.335”

Long Fairway 41.5 – 42.5 40.5 – 41.5 S2S Ruby Lite A, AA Wood; 650 A/L Wood 0.335

High Fairway 40 – 41 39.5 – 40.5 S2S Ruby Lite A, AA Wood; 650 A/L Wood 0.335

5-Hybrid Iron 37.5 – 38 36.5 – 37 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

6/7-Hybrid Iron 36.5 – 37 35.5 – 36 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

8/9-Hybrid Iron 35.5 – 36 34.5 – 35 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

5-Iron 37.5 – 38 36.5 – 37 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

6/7-Iron 36.5 – 37 35.5 – 36 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

8/9-Iron 35.5 – 36 34.5 – 35 S2S Ruby Lite A, AA Iron; S2S White Hybrid AA 0.335

Pitching Wedge 35 – 35.5 34 – 34.5 S2S Ruby Lite A, AA Wedge; 650 A/L Iron 0.370

Dual Wedge 34.5 – 35 33.5 – 34 S2S Ruby Lite A, AA Wedge; 650 A/L Iron 0.370

SPECIFICATIONS – 730Cl hybRid iRons/iRons/Wedges

iTem # head Loft Lie Weight offset sole angle Face hgt. Toe hgt. heel hgt. blade Length Rh/Lh

730 5-Hybrid Iron 30° 60° 254g –1mm 0° 34mm – – 78mm RH

730 6/7-Hybrid Iron 36 61 270 –2 0 37 – – 78 RH

730 8/9-Hybrid Iron 42 62 283 –3 0 43 – – 78 RH

730-IR-5 5-Iron 30 60 254 4 2 – 53mm 33mm 80 RH

730-IR-6/7 6/7-Iron 36 61 268 3 3 – 55 34 80 RH

730-IR-8/9 8/9-Iron 42 62 282 3 4 – 57 35 80 RH

730 PW 48 63 290 4 0 59 – – 78 RH

730 DW 54 63 300 4 0 60 – – 78 RH

730cl set

1w 3w 5w 7w 3 4 5 6 7 8 9 P S

1w LongFwy

HighFwy

5i 6/7 8/9 P D

X X

27

se

ts

neW

730CL intelligent set delivers more driver distance and more functional

distance increments vs conventional set makeup (3 & 4 irons are

unhittable for ≤80mph golfers)

new 730CL iron design allows golfers to choose between a hybrid iron (lower images) or conventional iron option (below)

STANDARD SET

730CL SET

29

se

ts

note: use any fairway wood headcover

(pg. 85) for the Future Pro junior driver

and any hybrid headcovers for the

fairway woodheads

Future Pro Grips available in 0.500” Core in regular and Putter models

Future Pro Heel/toe Putter Head available – item# 255–Ptr

Future ProSteel Shafts

Future ProGraphite Shafts

800.470.0072 • www.wishongolf.com for Serious Clubmakers • www.twgolftech.com for Serious Golfers

28

Head Material- Woodheads:

17-4 Stainless Steel

Head Material- Ironheads:

431 Stainless Steel

Ferrule Required:

Yes, model 124-WD-STD and 124-IR

loft/lie Bending:

Yes, +/- 2 to 3° in any direction

Bore Depth:

30mm in both the Wood and Ironheads

Bore Diameter:

0.335” Woodheads; 0.370” Ironheads

• Future Pro Stainless Steel Wood and Ironheads offer a quality alternative to cheap aluminum and zinc heads at a “parent friendly”, economical price

• Future Pro Wood and Ironheads are Designed with TWGT’s Hosel Weight Bore to allow proper weight fitting – Stainless Steel ironheads are easily bent for junior lie and loft fitting

• Designed Primarily for Junior Players, Ages 6 to 11, with increased loft to ensure early shotmaking success in the game

• Optional Future Pro Steel and Graphite Shafts allow clubmakers a wider range for shaft fitting and price consideration to the parents

• Future Pro Dark Blue Finished Stainless Steel Woodheads Available in #1 (15°), #3 (20°), #5 (25°)

• Mirror Polish Stainless Steel Ironheads Available in #5 (32°), #7 (40°), #9 (48°), DW (54°)

The Future Pro Stainless Steel Clubheads, Graphite and Steel Shafts and Grips Set Quality Standards for Starting Junior Golfers on the Right Path to Playing the Game

SPECIFICATIONS – FUTURE PRO JUNIOR iRons

iTem # head Loft Lie Weight offset sole angle Rh/Lh

855-5 5-Iron 32° 58° 248g 4mm 2° RH

855-7 7-Iron 40 60 262 4 2.5 RH

855-9 9-Iron 48 62 276 3 3 RH

855-DW Dual Wedge 54 62 284 3 7 RH

SPECIFICATIONS – FUTURE PRO JUNIOR gRaPhiTe shaFTs

iTem # model Flex Weight Torque butt diam. Tip diam. Raw Length swing speed

605-JR-Wood Wood Shaft Jr 70g 5.5° 0.500” 0.335” 40” <50mph

605-JR-Iron Iron Shaft Jr 70 5 0.500 0.370 37 <50

SPECIFICATIONS – FUTURE PRO JUNIOR sTeeL shaFTs

iTem # model Flex Weight Torque butt diam. Tip diam. Raw Length swing speed

605-JR-WD-Steel Wood Shaft Jr 90g 3.7° 0.500” 0.335” 40” <50mph

605-JR-IR-Steel Iron Shaft Jr 90 3.3 0.500 0.370 35 <50

future pro Junior set

5

about

Compared to all other golf equipment companies, Tom Wishon Golf Technology is a very different company.

We’re not like any of the companies whose golf clubs you see selling in standard form, off the rack, in retail golf stores, pro shops and over the internet. We believe all golf clubs should be custom fit to match each one of the 13 different custom fitting specifications to each golfer’s unique combination of size, strength, athletic ability and swing characteristics.

We’re also not like any of the companies who sell components. We develop and design every one of our original clubhead, shaft and grip models. From our vast experience in golf club R&D, we possess a far deeper understanding of golf club and fitting performance which we openly share with clubmakers. We are also the only company actively promoting the benefits of custom fitting to consumer golfers.

TWGT is committed to creating the highest performing, most innovative clubhead, shaft, and grip designs, backed by the best technical information in the golf industry, to support custom clubmakers who are committed to offering their golfers the very best in professionally custom fit golf clubs.

TWGT is proud of our skills and knowledge in golf equipment design and clubfitting technology which continues to achieve a high level of respect in the world golf industry.

• More than 60 different golf equipment and golf club technology firsts in clubhead design, shaft design, and clubfitting technology.

• The only designer from the custom clubmaking industry whose original clubhead designs have been used to win on the PGA Tour, Champions Tour and in Ryder Cup competition.

• Author of 9 books and hundreds of magazine articles about golf equipment technology and professional clubfitting. Two of our books have won the prestigious “Golf Book of the Year” award from the ING, the golf industry’s largest association of golf media professionals.

• Advisor in golf equipment and clubfitting technology for the professional training programs for numerous PGA organizations

around the world. When some of the major PGA’s in the world want their member professionals to know the truth about golf equipment and clubfitting, they come to TWGT.

• TWGT remains the only supplier of clubheads, shafts and grips to clubmakers who continues to make the effort to promote the benefits of professional clubfitting to consumer golfers. We support custom clubmakers to give them tools to grow their businesses more than any other company.

With the release of our books, The Search for the Perfect Golf Club, The Search for the Perfect Driver, The Right Sticks, and 12 Myths That Could Wreck Your Golf Game, TWGT continues to make golfers aware of the facts of life about their golf clubs – that professionally custom fit golf clubs are the only way any golfer can hope to play to the best of their ability. Clubmakers who use these books to educate their golfers are experiencing an increase in their fitting business.

If you’re not working with TWGT as your clubmaking supplier and clubfitting advisor, you’re missing an opportunity to increase your business by delivering the best performing golf clubs to golfers.

as we said, tWGt is a very different golf company.

ab

ou

t t

Wg

t

TomWishonGolf TECHNOLOGY

TM

tWGt’s r&D Center is the largest and most extensively equipped r&D building in the custom clubmaking industry.

91

“Dear Tom and TWGT Staff, Many thanks for your great customer service and your great products. The people and products of TWGT never ceases to amaze.”

– Mark Sparks, [email protected]

“I recently was fitted for a set of 770CFE irons. I found the nearest company was Two Rivers Golf near Sacramento, Calif. Anyway, I love the clubs and getting fit by professionals is a much smarter way to buy clubs. Scott and Jim at Two Rivers Golf made the experience for me and my friend Dennis worthwhile. We drove from Utah to Sacramento just for the experience. The quality of the Wishon brand is awesome. We have the clubs, bag, hats and so we will be walking/playing advertisements for your great product.

Oh by the way, loved reading your book, ‘The Search for the Perfect Golf Club’”.

– Sincerely, Ray

“Tom Wishon is one of the golf industry’s most prolific designers. In the past two decades, he’s fashioned literally hundreds of head designs during stints at Golfsmith and Dynacraft. Firms like these made their mark selling components—heads, shafts and grips—to custom club makers and some club maker wannabes.

These days Wishon runs his own company, Tom Wishon Golf Technology (TWGT). His latest iron head, 560MC Forged Carbon Steel, is a forged cavity back with built-in game-improvement properties. Wishon is proud as a papa because, he says, it is the first forged carbon steel iron with the entire back cavity made by CNC machining. Most forged cavity back irons squeeze carbon steel out of the way to form a cavity. But Wishon mills the back of the head to produce a deeper cavity with more weight around it. The payoff is a higher moment of inertia or, in lay terms, a better result for off-center hits. It’s a clever way to deliver a more forgiving forged iron.”

– By Rob Sauerhaft, Managing Editor/Equipment GOLF Magazine

more testimonials online at: www.wishongolf.com/testimonials.php

log on to our Websiteskudos for tWgt

Our website for custom Clubmakers to keep up to date and order TWGT designs online.

Available to help educate consumers on the benefits and details of TWGT designs.

visit tWGt websites frequently for current news about new ways we can help you market your clubmaking business.

WWW.tWgolftech.com

WWW.Wishongolf.com

on

th

e W

eb

TWGT Irons & Wedges 2010

Documents

Transcript of TWGT Irons & Wedges 2010