TSSR RAN
-
Upload
anon275711487 -
Category
Documents
-
view
174 -
download
3
Transcript of TSSR RAN
Telenor Vega Project
Site ID: MVD001
Site Name: BASTI MUZAWAR WALI WAD
Site Type GF
City/town: DG KHAN
District: DG KHAN
Site Address:
Surveyor: KALEEMULLAH KHAN
Tel: 3035000983
Survey Date: 20-09-12
ZTE Submitter Telenor Receiver Telenor Approver
Name: Name: Name:Date: Date: Date:
TECHNICAL SITE SURVEY REPORT
BASTI MUZAWAR WALI WADOR DG KHAN
document.xlsx Page 2
Qty Survey Item Existing Information Tips
Site Basic Information1 Site ID: MVD001
2 Site Name: BASTI MUZAWAR WALI WADOR
3 RF Configuration for 900Mhz-Existing S/// Automatically generated
4 RF Configuration for 1800Mhz-Existing S/// Automatically generated
5 City/town: DG KHAN
6 District: DG KHAN
7 Survey Date: 20-09-12
8 Longitude(E): 30.07937
9 Latitude(N): 70.5409
10 Site Location Village
11 Elevation (m): 166
12 Site Type: GF Greenfield Site or Rooftop Site
13 Hub/Normal/BSC/Core Normal
14 Site type (equipment location): Outdoor Pad
15 Building Height(m):
16 Site Category: Macro Macro, Micro or TXN Repeater
17 Tower property TP Bulid TP Build, TP Guest or Authority
18 Host Operator TP
19 Number of sharing parties 0
20 Tower Type: 4-legs Tower
21 Tower/Pole Material Angle Tower
22 Tower Height(m): 60
23 Tower Paint NO
24 Tower grounding provided YES
25 Fall Arrest System (Cage / Anti Glide lock System) YES
26 Air Craft Warning Light installed YES
27 Fire Panel Installation NO
28 Boundary/Wall Fence Type Wall Fence
29 Site Security Security Guard Security Guard/Remotely Monitored
30 Site Address: BASTI MUZAWAR WALI WADOR DG KHAN
Site Access Information1 Site Access 24hrs
2 Night access possible Yes
3 Land Owner Issue No
4 Land Owner Name NABI BAKSH,ALI BAKSH
5 Contact Number for Site Access 3434198772
6 Special Access Permissions No
7 Society issue No
8 Special Key needed? No
9 Crane needed No
10 Width of stairs No only for rooftop sites
11 Remark
Existing AC Informaiton1 Independent Transformer YES
2 Sanctioned Load (KW) Allowed maximum power could be used for site
3 Existing IPS Type N/A If no IPS, please choose N/A
4 Existing ATS Type Outdoor ATS If no ATS, please choose N/A
5 Existing ACDB Type Outdoor ACDB If no ACDB, please choose N/A
6 AC Power Three phase
7 Surge Arrestor Installed NO
8 Surge Arrestor Rating(kA)
9 Main Breaker Capacity 50A
10 Total service breakers 7
11 Rating of transformer(KVA) 25KVA
12 AC cable size 16m From MCB to ACDB/IPS/ATS
13 AC cable Length(m) 10
14 Spare socket Qty.
Technical Site Survey Report Telenor Vega Project
document.xlsx Page 3
15 Spare service breakers
16 Current Load(A) 0.16
17 Current Load(B) 5.47
18 Current Load(C) 8.91
19 Rating of ATS/IPS KVA
20 Remark
document.xlsx Page 4
Existing Grounding Information1 Numbers of earthing Pit 2
2 Grounding Resistance Pit1 (ohm) 0.02
3 Grounding Resistance Pit2 (ohm) 0.01 If there are more separated Pit.
4 Remark Anything else to record
document.xlsx Page 5
Existing Genset Information1 Existing Genset Available only for TP Genset
2 Genset Model semens only for TP Genset
3 Genset Qty 1 only for TP Genset
4 Genset Capacity(KVA) only for TP fuel tank
5 Existing fuel tank Available only for TP fuel tank
6 Fuel tank Capacity(L) 516 only for TP fuel tank
Exiting Rec.Rec. Type 1
1 DC System Manufacturer PowerOne Rectifier installed(OD)
2 Rec. Model.
3 Service Rectifier Module 6
4 Spare Module Slots 4
5 Each Module Capacity 40A
6 Total DC Breakers 18
7 Spare DC Breakers 6
8 Output Voltage 40V
9 DC Total Capacity
10 Spare socket Qty. 3
11 Current Loadind 54
12 Spare Space Inside of Rec.(U) 5
Rec. Type 21 DC System Manufacturer
2 Rec. Model.
3 Service Rectifier Module
4 Spare Module Slots
5 Each Module Capacity
6 Total DC Breakers
7 Spare DC Breakers
8 Output Voltage
9 DC Total Capacity
10 Spare socket Qty.
11 Current Loadind
12 Spare Space Inside of Rec.(U)
13 Remark
Existing Battery Information Battery Type 1
1 Battery Model If the Cabinet not open, no need fill in this information
2 Battery Group Quantity(0,1,2,3) 2 If the Cabinet not open, no need fill in this information
3 Battery Type(2v,12v) 12v If the Cabinet not open, no need fill in this information
4 Battery Capacity of Each Group 200AH If the Cabinet not open, no need fill in this information
5 Battery Installation Existing Rec.
Battery Type 21 Battery Model If the Cabinet not open, no need fill in this information
2 Battery Group Quantity(0,1,2,3) If the Cabinet not open, no need fill in this information
3 Battery Type(2v,12v) If the Cabinet not open, no need fill in this information
4 Battery Capacity of Each Group If the Cabinet not open, no need fill in this information
5 Battery Installation
Existing Equipments Information1 Qty of Existing BTS Cabinet 1 Only for TP Equipments
2 Type of Existing BTS Cabinet outdoor Only for TP Equipments
3 Dimensions of Existing BTS Cabinet Only for TP Equipments
4 Qty of Existing Rec. Cabinet 1 Only for TP Equipments
5 Dimensions of Existing Rec. Cabinet 1 Only for TP Equipments
6 Qty of Existing Outdoor Battery Cabinet Only for TP Equipments
7 Dimensions of Existing Outdoor Battery Cabinet Only for TP Equipments
Existing Pad/Shelter Information1 Number of shelters/rooms
2 Dimension of shelter/room1
3 Dimension of shelter/room2
4 Dimension of shelter/room3
5 Dimension of shelter/room4
6 Number of air-conditioners
7 Capacity of Air Conditioner [Tones] No need to fill if there is no label on the air conditioner
document.xlsx Page 6
8 Dimension of existing Pad
9 Sunshade Available If not available, please propose new sunshade
10 Qty of Existing Cabinet on the Existing BTS Pad choose 0 for indoor site, only for TP BTS pad
11 Spare Space on the Existing Pad for New Rec or Not Available Only for TP pad
12 Existing Base Frame Type No existing base frame
13 Remark Anything else to record
No existing base frame,Short channel (need to be removed),Width less than 660mm,Width more than 660mm.
document.xlsx Page 7
BTS External Alarms1 Alarm type PowerOne Rectifier installed(OD)
2 Existing total alarm points qty 3
3 High Voltage Alarm Status
4 Door Open Alarm Status
5 AC Main Fail Alarm Status
6 Low Voltage Alarm Status
7 Distribution Fuse Alarm Status
8 Temperature Alarm Status
9 Generator Running Alarm Status
10 OB Light Alarm Status
11 Low Fuel Alarm Status
12 GEM Active Alarm Status
13 Spare alarm points(NIL) qty
14 Rectifier Fail Alarm Status
15 HEX/LOAD Alarm Status
16 Spare alarm points(NIL) Status
17 Hi Temp Alarm Status
18 Air Conditioner Alarm Status
19 Smoke Detector Alarm Status
20 AVR Alarm Status
21 High Load Alarm Status
22 GEM Fail Alarm Status
Existing 2G-900Mhz Antenna System InformationItem Sector-1 Sector-2 Sector-3 Sector-4
1 Band of Antenna
2 Antenna Type
3 Band dual dual dual
4 Qty of Ports 4 4 4
5 Qty of Antennas 1 2 1
6 TMA Type Used No No No
7 Qty of TRX
8
9 Azimuth
10 Mechanical
11 Electrical Tilt
12 Pole Length
13 Ant Jumper Type
14 Main Feeder Type
15 Main Feeder Qty
16 Main Feeder Length
17 Combiner Model Used
18 Combiner Type Used
19 BTS Jumper Type
Existing 2G-1800Mhz Antenna System InformationItem Sector-1 Sector-2 Sector-3 Sector-4
1 Band of Antenna
2 Antenna Type
3 Band
4 Qty of Ports
5 Qty of Antennas
6 Qty of TRX
7 TMA Type Used
8
9 Azimuth
10 Mechanical
11 Electrical Tilt
12 Pole Length
13 Ant Jumper Type
14 Main Feeder Type
15 Main Feeder Qty
16 Main Feeder Length
17 Combiner Model Used
18 Combiner Type Used
Height (AGL)
Height (AGL)
document.xlsx Page 8
19 BTS Jumper Type
document.xlsx Page 9
Existing RF Antenna Information(including other operator's ANT) Site ID: MVD001
No. Band Vendor Remark Loading(m2)
1 1 59 24.2 2516 262 139 2 katrine TP2 2 45 131.4 2516 262 139 2 katrine TP3 3 59 255.5 2516 262 139 2 katrine TP456789
1011121314151617
Current RF Antennas Loading 0.00
Existing MW equipment Information(including other operator's ANT)
No.
1 3 3MSKR11 Seimen TP 195 1 23456789
101112131415161718
Current MW Dishes Loading 1.20
Proposed Loading
No. Items Quantity Loading(m2)
1 2G RRU2 3G RRU
3 0.3m MW dish
4 0.6m MW dish
5 0.9m MW dish
6 1.2m MW dish
7 1.8m MW dish
8 2.0m MW dish Total Loading 1.20
9 3G Antenna Tower Design Loading
Proposed Loading 0.00 Tower strengthen required YES
Tower Leg No.
Antenna Height(m)
Antenna Azmuth
Antenna Length(mm)
Antenna Width(mm)
Antenna Thickness(mm)
Antenna Owner
Tower Leg No.
Antenna Height(m)
Remote Site
Antenna Size
Equipment Type(IDU)
Antenna Owner
Antenna Azmuth
Loading(m2)
document.xlsx Page 10
Site ID: MVD001Qty Proposed Item Proposed Information Tips
Proposed SWAP Information1 RF Configuration for 900Mhz S/// Automatically generated
2 RF Configuration for 1800Mhz S/// Automatically generated
3 Swap Model
4 SDR Type BS8700
5 BBU Installation Type W301
6 Qty. of Proposed Macro SDR Cabinet
7 Qty. of BS8908
8 Proposed SDR Cabinet Installed on the If no new SDR cabinet, no need fill in information
9 For TP Outdoor Site
10 BBU DC Cable Length(m)
11 Power Cable length for SDR Cabinet 5 if BBU installed inside of BS8800, BS8900, BS8908 and BC8910
12 Grounding Cable for BBU Installed Inside of W301(m) if BBU installed in the W301,existing Rec., TRX rack, wall mounted
13 Grounding Cable for SDR Cabinet(m) 5 if BBU installed inside of BS8800, BS8900, BS8908 and BC8910
14 Tower Strengthing for 3G Single Band Antenna, RRUs and New MW dish YES
15 Remark
Proposed AC Power information
1 Proposed ACDB
2 Proposed IPS
3 Required 10 Amp Circuit Breaker 1 Phase AC breakers if no need new breaker, no need fill in this information
4 Required 16 Amp Circuit Breaker 1 Phase AC breakers if no need new breaker, no need fill in this information
5 Required 20 Amp Circuit Breaker 1 Phase AC breakers if no need new breaker, no need fill in this information
6 Required 16 Amp Circuit Breaker 3 Phase AC breakers if no need new breaker, no need fill in this information
7 Required 32 Amp Circuit Breaker 3 Phase AC breakers if no need new breaker, no need fill in this information
8 Required 63 Amp Circuit Breaker 3 Phase AC breakers if no need new breaker, no need fill in this information
9 2 Core (16mm2) AC power cable (Between ACDB/IPS/ATS and MCB) if no need new breaker, no need fill in this information
10 4 Core (16mm2) AC power cable (Between ACDB/IPS/ATS and MCB) if no need new breaker, no need fill in this information
11 2 Core (25mm2) AC power cable (Between ACDB/IPS/ATS and MCB) if no need new breaker, no need fill in this information
12 4 Core (25mm2) AC power cable (Between ACDB/IPS/ATS and MCB) if no need new breaker, no need fill in this information
13 gounding cable 10mm2 Unit:Meter
14 gounding cable 16mm2 Unit:Meter
Proposed Rec. Information1 Proposed Rectifier W301
2 Proposed New Rec. installed on the if existing Rec. reused, choose N/A
3 Base Frame for New Rec. only for TP outdoor site
4 2 Core (16mm2) AC power cable (Between ACDB/IPS/ATS and Rec.) Unit:Meter
5 4 Core (16mm2) AC power cable(Between ACDB/IPS/ATS and Rec.) Unit:Meter
6 2 Core (25mm2) AC power cable(Between ACDB/IPS/ATS and Rec.) Unit:Meter
7 4 Core (25mm2) AC power cable(Between ACDB/IPS/ATS and Rec.) Unit:Meter
8 New DC Power Cable Length(between Rec. and Battery) 20 Unit:Meter
9 Grounding Cable Length Unit:Meter
Proposed Battery Information1 Proposed New Battery Cabinet Type 12v Battery Cabinet if battery installed outdoor battery cabinet, please choic N/A
2 Battery Cabinet Installed on the If no need new battery, no need fill in information
3 Base Frame for New Battery Cabinet only for battery cabinet installed on the existing pad
Proposed Outdoor Pad and Sunshade1 Swap Model 0
2 Outdoor Pad for 1 Cabinet With Sunshade Refer to Generic Design
3 Outdoor Pad for 2 Cabinets With Sunshade Refer to Generic Design
4 Outdoor Pad for 3 Cabinets With Sunshade Refer to Generic Design
5 Outdoor Pad for 4 Cabinets With Sunshade Refer to Generic Design
6 Unit:Each
7 Unit:Each
8 BTS and Power cabinets mounting frame with sunshade Unit:Each
9 Existing Shelter Modification Unit:Each
10 Special Outdoor Pad Unit:Each
11 Sunshade Type Unit:Each
Proposed Cable Tray1 300mm Width Horizontal Cable Tray(Indoor) Unit:Meter
2 300mm Width Vertical Cable Tray(Indoor) Unit:Meter
3 300mm Width Horizontal Cable Tray(outdoor) Unit:Meter
4 300mm Width Vertical Cable Tray(outdoor) Unit:Meter
5 400mm Width Horizontal Cable Tray(outdoor) Unit:Meter
6 400mm Width Vertical Cable Tray(outdoor) Unit:Meter
Proposed Pipe1 Soft Pipe For indoor fiber protection. Unit:Meter
2 PVC Pipe (Diameter-25mm) For outdoor underground cabling protection. Unit:Meter
3 PVC Duck For indoor cabling protection(out of cable bridge part). Unit:Meter
4 Steel Pipe (Diameter-25mm ) For special situation requirments. Unit:Meter
5 Metal flexible piple For outdoor on ground cabiling protection. Unit:Meter
Technical Site Survey Report Telenor Vega Project
BS8700 is distributed and RRU installed on the tower/pole, BS8900 is ourdoor macro, BS8800 is indoor marco, BS8908 is metro
only for distributed, if BBU installed inside of SDR cabinet, no need fill in this information
Base Frame for New SDR Cabinet (BS8900A、BC8910)
only for distributed,if BBU installed inside of BS8800,BS8900,BS8908,BC8910 cabinet, please choose N/A
W301 is outdoor Rec, T601 is indoor Rec, If no need Rec., choose N/A
Frame and sunshade for additonal BTS or Rectifier (partial; either for BTS or rectifier)
Frame and sunshade for additonal BTS or Rectifier (complete; for one BTS and one rectifier)
document.xlsx Page 11
Proposed 900Mhz Antenna System and RRUs InformationItem Sector-1 Sector-2 Sector-3 Sector-4
1 Existing Antenna Reused/New Antenna
2 Antenna Band
3 Antenna Type
4 Qty of Antennas
5 Port of Antenna
6 Height (AGL)
7 Azimuth
8 Machanical Tilt
9 Electrical Tilt
10 Ant. Jumper Type
11 Antenna Jumper Length(m)
12 BTS Jumper Type
13 BTS Jumper Length(m)
14 Qty of TRX (Very Important)
15 RRU Type
16 Qty. of RRU Type
17 RRU Mounting Solution N/A N/A N/A N/A
18 Fibre Length
19 DC Power Cable Lenth
Proposed 1800Mhz Antenna System and RRUs InsormationItem Sector-1 Sector-2 Sector-3 Sector-4
1 Existing Antenna Reused/New Antenna
2 Antenna Band
3 Antenna Type
4 Qty of Antennas
5 Remove Qty of Existing Antennas
6 Port of Antenna
7 Height (AGL)
8 Azimuth
9 Machanical Tilt
10 Electrical Tilt
11 Ant. Jumper Type
12 Antenna Jumper Length(m)
13 BTS Jumper Type
14 BTS Jumper Length(m)
15 Qty of TRX (Very Important)
16 RRU Type 1
17 Qty. of RRU Type 1
18 Fibre Length for Type1
19 DC Power Cable Lenth for Type1
20 RRU Type 2
21 Qty. of RRU Type 2
22 Fibre Length for Type2
23 DC Power Cable Lenth for Type2
24 RRU Mounting Solution N/A N/A N/A N/A
Proposed 3G Antenna System and RRUs InformationItem Sector-1 Sector-2 Sector-3 Sector-4
1 Existing Antenna Reused/New Antenna
2 3G Band
3 Antenna Type
4 Qty of Antennas
5 Port of Antenna
6 Ant Mount Type
7 Height (AGL)
8 Azimuth
9 Machanical Tilt
10 Electrical Tilt
11 Ant. Jumper Type
12 Antenna Jumper Length(m)
13 Feeder Type
14 Feeder Length
15 BTS Jumper Type
16 BTS Jumper Length(m)
17 RRU Type
18 Qty. of RRU Type
19 RRU Mounting Solution
20 Fibre Length
21 DC Power Cable Lenth
document.xlsx Page 12
3. Site Photos Site ID: MVD001
3.1 Site Basic Photos Please refer to Site photo folder
Access Road Site Overview
Transformer(If have) Shared Existing Battery
Existing ACDB 01(door closed) Existing ACDB 02(door open)
document.xlsx Page 13
Antenna nameplate GPS record 1
GPS record 2 GPS record 3
document.xlsx Page 14
MCCB Rating Existing MCDB 03(zoom door open)
Existing Rectifier(door closed) Existing Rectifier(door open)
Existing Rectifer Brand& Module Type Existing Rectifer(zoom door open)
document.xlsx Page 15
Existing Transmission Rack Exisiting Generator
Existing Transmission Rack(Zoom) Genset Rating
Physical Condition ATS(door closed) ATS(door open)
document.xlsx Page 16
Existing Vertical Cable Ladder Existing Horizontal Cable Ladder
Alarm module Exisiting Antenna (RF&MW) position on Tower/Pole
Existing BTS Rack Existing BTS Rack(door open)
document.xlsx Page 17
3.2 Site Details View Photo
Tower/Pole Structure Existing Shelter/Room/Outdoor Pad
Existing Sunshade (Outdoor) Existing equipment base frame
Route of Cable Ladder Existing Feeder Portholes
document.xlsx Page 18
Existing Grounding Bar on Tower/pole Existing Outdoor/Indoor Grounding Bar
Lightening Arrestor Earth Pit
Earth Resistance Value (AC) Earth Resistance Value (DC)
document.xlsx Page 19
Earth Resistance Value (Tower) Existing Sector-1
Existing Sector-2 Existing Sector-3
Existing Sector-4 Existing Pole 01
document.xlsx Page 20
Existing Pole 02 Existing Pole 03
Existing Pole 04 Existing Separate Battery Cabinet
3.3 Proposed New Equipment & Antenna
Proposed New SDR Location Reused Existing DDF
document.xlsx Page 21
Proposed New Rec. Location Proposed RRU Location-1
Proposed RRU Location-2 Proposed RRU Location-3
N/A
Proposed RRU Location-4 Proposed New Pad Location
document.xlsx Page 22
New Antenna01 on Tower/pole( Section1) New Antenna02 on Tower/pole( Section2)
New Antenna03 on Tower/pole( Section3) New Antenna 04 on Tower/pole( Section4)
document.xlsx Page 23
Item Material Code Unit Length(m) Qty
AC Power Site ID: MVD001New outdoor ACDB set 0 1IPS set 0 12 Core (16mm2) AC power cable (Between ACDB/IPS/ATS and MCB) m 0 14 Core (16mm2) AC power cable (Between ACDB/IPS/ATS and MCB) m 0 12 Core (25mm2) AC power cable (Between ACDB/IPS/ATS and MCB) m 0 14 Core (25mm2) AC power cable (Between ACDB/IPS/ATS and MCB) m 0 1Required 10 Amp Circuit Breaker 1Phase AC breakers pcs 0 1Required 16 Amp Circuit Breaker 1Phase AC breakers pcs 0 1Required 20 Amp Circuit Breaker 1Phase AC breakers pcs 0 1Required 16 Amp Circuit Breaker 3 Phase AC breakers pcs 0 1Required 32 Amp Circuit Breaker 3 Phase AC breakers pcs 0 1Required 63 Amp Circuit Breaker 3 Phase AC breakers pcs 0 1gounding cable 10mm2 m 0 1Copper Thumber 0-10 mm2 pcs 1 0gounding cable 16mm2 m 0 1Copper Thumber 0-16 mm2 pcs 1 0W301 Installation800mm Base Frame set 1 0950mm Base Frame set 1 02 Core (16mm2) AC power cable (Between ACDB/IPS/ATS and Rec.) m 0 14 Core (16mm2) AC power cable(Between ACDB/IPS/ATS and Rec.) m 0 12 Core (25mm2) AC power cable(Between ACDB/IPS/ATS and Rec.) m 0 14 Core (25mm2) AC power cable(Between ACDB/IPS/ATS and Rec.) m 0 1DC (25mm2) power cable (Between Rec. and Battery) m 20 1
Grounging cable for W301(16mm2) m 0 1
Copper Thumber 0-16 mm2 pcs 1 0T601 installation2 Core (16mm2) AC power cable (Between ACDB/IPS/ATS and Rec.) m 0 1
4 Core (16mm2) AC power cable(Between ACDB/IPS/ATS and Rec.) m 0 1
2 Core (25mm2) AC power cable(Between ACDB/IPS/ATS and Rec.) m 0 1
4 Core (25mm2) AC power cable(Between ACDB/IPS/ATS and Rec.) m 0 1
DC (25mm2) power cable (Between Rec. and Battery) m 0 1
Grounging cable for new Rec.(16mm2) m 0 1
Copper Thumber 0-16 mm2 pcs 1 0
Battery
12V Battery cabinet cabinet 1 1
m 20 1
800mm Base Frame set 1 0950mm Base Frame 1 0Grounding cable for new battery cabinet(16mm2) m 5 1
Copper Thumber o-16 pcs 1 2
BS8800 InstallationDC Blue Power Cable(from rec.25mm2) m 0 1DC Black GND Cable(from rec.25mm2) m 0 1Grounding cable(16mm2) m 0 1Copper Thumber 0-16 mm2 pcs 1 0BS8900 Installation
800mm Base Frame set 1 0950mm Base Frame set 1 0DC Blue Power Cable(from Rec.25mm2) m 0 1DC Black GND Cable(from Rec.25mm2) m 0 1Grounding cable(16mm2) m 0 1
Copper Thumber 0-16 mm2 pcs 1 0
DC (2 core 1.5mm2) power cable (Between Rec. and Battery for battery cabinet AC)
document.xlsx Page 24
BS8908 InstallationBS8908 Cabinet cabinet 1 0BS8908 Base Frame (Installed on the floor) set 1 0BS8908 Wall-mount (Installed to wall) set 1 01-TO-1 BS8908 Bracket (A BS8908 installed to pole) set 1 01-TO-2 BS8908 Bracket (Back-to-back installation for 2 BS8908 ) set 1 01-TO-3 BS8908 bracket (Combined installation of 3 BS8908) set 1 02 core shielded DC power cable(4mm2, length<=130m) m 0 12 core shielded DC power cable(6mm2,130m<length) m 0 1AC power cable (2.5mm2) m 0 1
Grounding cable(16mm2) m 0 1
Copper Thumber 0-16 mm2 pcs 1 0
BBU InstallationBS8200 set 1 1BC8910 Set 1 0800mm Base Frame set 1 0950mm Base Frame set 1 0DC Blue Power Cable (Between Rec. and BC8910 ,25mm2) m 5 1DC Black GND Cable (Between Rec. and BC8910 ,25mm2) m 5 1Indoor wall-mount Frame set 1 0New Indoor 19" rack rack 1 02m BBU DC power cable pcs 2 03m BBU DC power cable pcs 3 05m BBU DC power cable pcs 5 015m BBU DC power cable pcs 15 0Grounding cable (16mm2) m 0 1
Copper Thumber 0-16 mm2 pcs 1 0R8840 InstallationQty. of R8840(3G-2100M) set 1 02 core shielded power cable(4mm2, length<=110m) m 0 12 core shielded power cable(6mm2,110m<length<=170m) m 0 12 core shielded power cable(10mm2,170m<length<=290m) m 0 12 core shielded power cable(16mm2,290m<length) m 0 1Grounding Cable(16mm2) m 5 0Copper Thumber 0-16 mm2 pcs 1 0R8881 InstallationQty. of R8881(2G-900M) set 1 0Qty. of R8881(2G-1800M) set 1 02 core shielded power cable(4mm2, length<=90m) m 0 12 core shielded power cable(6mm2,90m<length<=140m) m 0 12 core shielded power cable(10mm2,140m<length<=240m) m 0 12 core shielded power cable(16mm2,240m<length) m 0 1Cascading RF cable set 1 0Cascading Fiber set 1 0Grounding Cable(16mm2) m 5 0
Copper Thumber 0-16 mm2 pcs 1 0R8882 InstallationQty. of R8882(2G-900M) set 1 0Qty. of R8882(2G-1800M) set 1 02 core shielded power cable(4mm2, length<=60m) m 0 12 core shielded power cable(6mm2,60m<length<=100m) m 0 1
2 core shielded power cable(10mm2,100m<length<=170m) m 0 1
2 core shielded power cable(16mm2,170m<length<=250m) m 0 1
Grounding Cable(16mm2) m 5 0
Copper Thumber 0-16 mm2 pcs 1 0
document.xlsx Page 25
R8882(MBR) InstallationQty. of R8882(MBR) set 1 02 core shielded power cable(4mm2, length<=60m) m 0 12 core shielded power cable(6mm2,60m<length<=100m) m 0 12 core shielded power cable(10mm2,100m<length<=170m) m 0 12 core shielded power cable(16mm2,170m<length<=250m) m 0 1Grounding Cable(16mm2) m 5 0Copper Thumber 0-16 mm2 pcs 1 0FiberOutdoor fiber(2m) 2m 1 0Outdoor fiber(3m) 3m 1 0Outdoor fiber(5m) 5m 1 0Outdoor fiber(10m) 10m 1 0Outdoor fiber(20m) 20m 1 0Outdoor fiber(25m) 25m 1 0Outdoor fiber(30m) 30m 1 0Outdoor fiber(35m) 35m 1 0Outdoor fiber(40m) 40m 1 0Outdoor fiber(45m) 45m 1 0Outdoor fiber(50m) 50m 1 0Outdoor fiber(60m) 60m 1 0Outdoor fiber(70m) 70m 1 0Outdoor fiber(80m) 80m 1 0Outdoor fiber(90m) 90m 1 0Outdoor fiber(100m) 100m 1 0Outdoor fiber(115m) 115m 1 0Outdoor fiber(145m) 145m 1 0Outdoor fiber(160m) 160m 1 0Outdoor fiber(175m) 175m 1 0Outdoor fiber(190m) 190m 1 0Outdoor fiber(205m) 205m 1 0Outdoor fiber(220m) 220m 1 0Outdoor fiber(235m) 235m 1 0Outdoor fiber(250m) 250m 1 0Outdoor fiber(280m) 280m 1 0Outdoor fiber(310m) 310m 1 0Outdoor fiber(350m) 350m 1 0Jumper/Feeder/AdpterLCF 1/2" jumper,DIN-DIN,3m 3m 1LCF 1/2" jumper,DIN-DIN,5m 5m 1LCF 1/2" jumper,DIN-DIN,8m 8m 1LCF 1/2" jumper,DIN-DIN,10m 10m 1LCF 1/2" jumper,N-DIN,3m 3m 1LCF 1/2" jumper,N-DIN,5m 5m 1LCF 1/2" jumper,N-DIN,8m 8m 1LCF 1/2" jumper,N-DIN,10m 10m 1LCF 1/2" jumper(more than 10m) 1SCF 1/2" jumper,DIN-DIN,3m 3m 1SCF 1/2" jumper,DIN-DIN,5m 5m 1SCF 1/2" jumper,DIN-DIN,8m 8m 1SCF 1/2" jumper,DIN-DIN,10m 10m 1SCF 1/2" jumper,N-DIN,3m 3m 1SCF 1/2" jumper,N-DIN,5m 5m 1SCF 1/2" jumper,N-DIN,8m 8m 1SCF 1/2" jumper,N-DIN,10m 10m 1SCF 1/2" jumper(more than 10m) 17/8" feeder m 05/4" feeder m 0D Connector pcs 1N Connector pcs 1
document.xlsx Page 26
AntennaMB3F-65-18DE10 pcs 1 0MB3BH-65-18DE pcs 1 0MB3BH&3F-65-17&18DE pcs 1 0MB3BH&3F&3F-65-17&18&18DE pcs 1 0Antenna MountsAnt Mount for Angle Tower with 2m Pole pcs 1 0Ant Mount for Angle Tower with 3m Pole pcs 1 0Ant Mount for Monopole with 2m Pole pcs 1 0Ant Mount for Monopole with 3m Pole pcs 1 0Ant Mount for GuyMast with 2m Pole pcs 1 0Ant Mount for GuyMast with 3m Pole pcs 1 0Ant Mount for Tube Tower with 2m Pole pcs 1 0Ant Mount for Tube Tower with 3m Pole pcs 1 0Ant Mount for Cudee Tower with 2m Pole pcs 1 0Ant Mount for Cudee Tower with 2m Pole pcs 1 0
Diversity Frame 2.5m Galvanised Iron (GI) pcs 1 0
Diversity Frame 4m Galvanised Iron (GI) pcs 1 0
3m rooftop pole pcs 1 0
6m rooftop pole pcs 1 0RRU Installation Assembly1-TO-1 RRU bracket (1 RRU installed to pole) set 1 01-TO-2 RRU bracket (Back-to-back installation for 2 RRUs) set 1 01-TO-3 RRU bracket (Combined installation of 3 RRUs) set 1 0Grounding Bar pcs 1 1RRU Mounts
RRU Mount for Angle Tower for 3 RRUs pcs 1 0
RRU Mount for Monopole Tower for 3 RRUs pcs 1 0
RRU Mount for Guy Mast Tower for 3 RRUs pcs 1 0RRU Mount for Tube Tower for 3 RRUs pcs 1 0RRU Mount for Cudee Tower for 3 RRUs pcs 1 0RRU Mount on the Roof Top for 3 RRUs pcs 1 0RRU Mount for Angle Tower for single RRU pcs 1 0
RRU Mount for Monopole Tower for single RRU pcs 1 0
RRU Mount for Guy Mast Tower for single RRU pcs 1 0RRU Mount for Tube Tower for single RRU pcs 1 0RRU Mount for Cudee Tower for single RRU pcs 1 0Wall Mount pcs 1 0Cable Tray300mm Width Horizontal Cable Tray(Indoor) m 0 1300mm Width Vertical Cable Tray(Indoor) m 0 1300mm Width Horizontal Cable Tray(outdoor) m 0 1300mm Width Vertical Cable Tray(outdoor) m 0 1400mm Width Horizontal Cable Tray(outdoor) m 0 1400mm Width Vertical Cable Tray(outdoor) m 0 1SunshadeODU sunshade for 1 cabinet set 1 0ODU sunshade for 2 cabinet set 1 0ODU sunshade for 3 cabinet set 1 0ODU sunshade for 4 cabinet set 1 0special ODU sunshade set 1 0PipeSoft Pipe m 0 1PVC Pipe (Diameter-25mm) m 0 1PVC Duck m 0 1
Steel Pipe (Diameter-25mm ) m 0 1
Metal flexible piple m 0 1
Others
Grounding Bar on the new pad set 1 0
MW Mounts
document.xlsx Page 27
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
pcs 1
MW Dish Mount for Angle Tower with 1m pole (For 0.3m dish,0.6m dish)
MW Dish Mount for Monopole Tower with 1m pole (For 0.3m dish,0.6m dish)
MW Dish Mount for Guy Mast Tower with 1m pole (For 0.3m dish,0.6m dish)
MW Dish Mount for Tube Tower with 1m pole (For 0.3m dish,0.6m dish)
MW Dish Mount for Cudee Tower with 1m pole (For 0.3m dish,0.6m dish)
MW Dish Mount for Angle Tower with 1.2m pole(For 0.9m dish,1.2m dish)
MW Dish Mount for Monopole Tower with 1.2m pole(For 0.9m dish,1.2m dish)
MW Dish Mount for Guy Mast Tower with 1.2m pole(For 0.9m dish,1.2m dish)
MW Dish Mount for Tube Tower with 1.2m pole(For 0.9m dish,1.2m dish)
MW Dish Mount for Cudee Tower with 1.2m pole(For 0.9m dish,1.2m dish)
MW Dish Mount for Angle Tower with 1.5m pole(For 1.8m dish,2.0m dish)
MW Dish Mount for Monopole Tower with 1.5m pole(For 1.8m dish,2.0m dish)
MW Dish Mount for Guy Mast Tower with 1.5m pole(For 1.8m dish,2.0m dish)
MW Dish Mount for Tube Tower with 1.5m pole(For 1.8m dish,2.0m dish)
MW Dish Mount for Cudee Tower with 1.5m pole(For 1.8m dish,2.0m dish)
MW Dish Mount for Angle Tower with 2m pole(For 3.0m dish)
MW Dish Mount for Monopole Tower with 2m pole(For 3.0m dish)
MW Dish Mount for Guy Mast Tower with 2m pole(For 3.0m dish)
MW Dish Mount for Tube Tower with 2m pole(For 3.0m dish)
MW Dish Mount for Cudee Tower with 2m pole(For 3.0m dish)
MW Dish Mount on the Roof Top with 3m pole
MW Dish Mount on the Roof Top with 6m pole
Site ID: MVD001
Item code Item description Unit Price (PKR) Unit of measure Qty
Fixed Part
SCWSW0000089 Power Provision to the new equipment Each 1
SCWSW0000088 Each 1
Varied Part
Mount&Cable Ladder
SCW3G0000095 Antenna mounts for RRUs Each 0
SCW000000265 pic 0
SCWGR0000118 Diversity Frame 2.5m Aluminium Each 0
SCWGR0000119 Diversity Frame 4m Aluminium Each 0
SCWSW0000087 BTS mounting frame Each 0
SCWRF0000005 Cable Ladder Rm 0
SCWGFBTS0005 Cable Ladder Rm 0
SCW000000182 Each 0
SCW000000133 RM 0
SCW3G0000094 Antenna mounts for 3G antennas Each 0
SCW000000187 GSM mount (any length) Each
SCWSW0000086 Each
BTS Pad Extension / construction
SCWSW0000091 Outdoor Pad for ID to OD Swap Each 0
SCWSW0000092 Each 0
SCWSH0000053 BTS mounting frame with sunshade Each 0
SCW000000134 Each 0
SCW000000135 Each 0
SCW000000136 Each 0
SCW000000137 Each 0
SCWGFBTS0003 Each 0
SCWSW0000090 Each 0
SCW000000254 each 0
SCWRF06m0002 RCC foundation for poles (RCC) m3
Electrical Work
Earthing and Lightning Protection of the new equipment
RRU Mounting that could support 3 RRU at the same time
Diversity Frame (Installation and transportation from warehouse only)
Extension of Cable Ladders along with vertical supports
Antenna mounts for new antennas and RRUs
Sunshade and frame for new pad on ID to OD sites
RCC Slab supported on RCC columns for additonal BTS or Rectifier (Partial; either for one BTS or one rectifier)
RCC Slab supported on RCC columns for additonal BTS and Rectifier (Complete for one rectifier and one BTS)
Frame and sunshade for additonal BTS or Rectifier (partial; either for BTS or rectifier)
Frame and sunshade for additonal BTS and Rectifier (complete; for one BTS and one rectifier)
BTS and Power cabinets mounting frame with sunshade
Dismantling and transportation of the previous shelter(without foundation) and accessaries(cables, cable tray) to warehouse
Shelter Modification(supplication and installation of 2xFan, aircondition dismantle/package/transport to warehouse)
Outdoor ACDB Each
SCWO10000043 (IPS) Integrated Power System Each 0
Generator
SCWO1SWAP045 Generator 13.5 KVA Each
SCWO10000046 Fuel Tank 500 Litres Each
SCW000000183 Each
SCWSW0000093 Each
Optional
SCW000000123 Each 0
SCW000000231 Grounding System Maintenance LS
Generator (Installation, transportation, commissioning and supply of installation related materials)
Dismantling and Transportation of 20 KVA generator to warehouse
Crane for equipment shifting at high rise roof top sites