Trimble DPS900 Drilling and Piling System - SITECH · 2020. 6. 8. · • CLD900 Chain Link Drive...
Transcript of Trimble DPS900 Drilling and Piling System - SITECH · 2020. 6. 8. · • CLD900 Chain Link Drive...
The Construction Technology Standard © 2013,Trimble Navigation Limited. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. All other trademarks are the property of their respective owners. PN 022482-2761 ((05/13)
Trimble DPS900 Drilling and Piling System Configuration Application Drilling Large construction cuts (roads, railways and sites)
Aggregate quarries Mining operations Foundations Geological/geotechnical sampling Exploration (oil, gas, mineral or water)
Piling
Structural foundations (bridges and buildings) Retaining walls and coffer dams Solar or wind farm installations
Trimble offers the heavy civil construction contractor the broadest range of machine control systems in the industry. Trimble systems are rugged, easy to use, fully upgradeable, portable, and flexible to meet a wide range of application and jobsite requirements. The Trimble® DPS900 Drilling and Piling System allows contractors to perform drilling and piling operations quickly, safely and accurately.
Trimble DPS900 Drilling and Piling System
The Construction Technology Standard © 2013,Trimble Navigation Limited. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. All other trademarks are the property of their respective owners. PN 022482-2761 ((05/13)
SPS855 SPS555H
I/O Box
Key System Features: • Trimble Zephyr 2 Rugged Antenna • Trimble SPS855 GNSS Modular Receiver and SPS555H GNSS Heading Add-on Modular Receiver • Trimble Site Tablet display running DPS900 software • Trimble JB900 Junction Box - provides clean power, CAN, USB and ethernet communications • I/O Box – provides depth auto stop and drill steel change monitoring • Trimble TS900 Tilt Sensor – monitors machine mast for tilt in the pitch and roll axis of the machine • Depth control sensors – options are available for most common installation types. • 3-5 cm accuracy
Trimble Site Tablet
Trimble DPS900 Drilling and Piling System
Zephyr 2 Rugged Antennas
TS900 Tilt Sensor
JB900 Junction Box
The Construction Technology Standard © 2013,Trimble Navigation Limited. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. All other trademarks are the property of their respective owners. PN 022482-2761 ((05/13)
Depth Sensor Options • CLD900 Chain Link Drive Depth Sensor • CRD900 Chain Rotation Drive Depth Sensor • CDD900 Cable Depth Drive Depth Sensor • PSD900 Proximity Switch Drive Depth Sensor
Note: Only one sensor type is needed per installation
Trimble DPS900 Drilling and Piling System
CRD900 PSD900
CLD900 CDD900