Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training...
Transcript of Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training...
![Page 1: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/1.jpg)
Training Courseon
Vibration Analysis Level-1
Centre for Vibration Analysis & Condition Monitoring (CVCM)
N-Block, Opp.: National Achieve Centre,
Pak Secretariat, Islamabad
![Page 2: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/2.jpg)
Condition Monitoring
“Monitors the condition of the machine, if you
know the condition you can plan your response”
![Page 3: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/3.jpg)
• Your rotating machine is tryingto tell you its condition via:
Vibration
Temperature
Oil samples
Sound
Motor voltage/current
• You have to choose thetechnologies required toassess the condition
Condition Monitoring (2)
![Page 4: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/4.jpg)
Condition Monitoring = Health Monitoring
Vibration:
The ‘pulse’ of the
machine
Oil:
The ‘life blood’ of
the machine
Thermography:
‘Taking its
temperature’
Motor Current:
The ‘brain waves’
of the machine
Total
Picture
![Page 5: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/5.jpg)
• Its all about money!
• When a machine fails:
Production may stop.
There may be secondary damage.
There may be safety or environmental issues.
Repair/labour costs can increase.
Why monitor the condition?
![Page 6: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/6.jpg)
• If we can assess the risk of failure we can plan therepair at most cost effective time. Parts can be orderedand labour organized.
• We do not need to perform expensive preventivemaintenance.
• We can reduce number of parts held in store
Condition Monitoring Benefits
![Page 7: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/7.jpg)
• Some technologies can tell us that aproblem exists now, and they help toassess the severity.
• Some tests will also tell us if a situationexists that could cause a problem infuture:
Contamination in lubricant
Resonance
Misalignment
Condition Monitoring: Early warning system
![Page 8: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/8.jpg)
• We do not always know what levels are acceptable
• Instead we watch for change in level
We trend levels over time
We can use statistics to set alarms
Condition Monitoring: Watch for a change
![Page 9: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/9.jpg)
• Each technology tells you something about the machine.
• Select the technologies and test frequency carefully.
• Best results are achieved when results from multipletechnologies are integrated into one report .
Condition Monitoring: The whole picture
![Page 10: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/10.jpg)
Overview of Technologies
![Page 11: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/11.jpg)
Condition Monitoring Technologies
• Oil Analysis
• Thermography
• Acoustic Emission
• Wear Particle Analysis
• Motor Testing
• Vibration Analysis
![Page 12: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/12.jpg)
Role of Condition Monitoring Technologies
Thermography19 %
![Page 13: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/13.jpg)
Overview of Technologies
Oil Analysis is a non-destructive test used to assess the condition of lubricants and determine the type and amount of contamination present.
Criticality of lubrication to most industrial equipment, oil analysis trending over time is one of the most powerful predictive tools for identifying potential failures.
3 basic categories of elements affecting the lubrication effectiveness: wear metals, contaminants, and additives.
![Page 14: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/14.jpg)
Oil Analysis – What does it offer ?
• Designed to keep track of the health of lubricants as well as the equipment.
• Detecting and avoiding Contamination
• Detecting and avoiding lubricant degradation
• Detecting and avoiding Wear
Therefore• Extending Lubricant Life
• Extending equipment life
• Improving Uptime performance
• Improving Profitability
Oil Analysis is not a tool for blaming someone !
![Page 15: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/15.jpg)
Benefits of Oil Analysis
– Reduce maintenance costs
– Reduce unexpected downtime
• Indication of component failure
• Locations of the damage
• Identify type of damage (chemical, abrasion, fatigue, or other)
– Increase equipment availability
![Page 16: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/16.jpg)
Potential Cost Saving from Oil Analysis
– Lubricant consolidation
– Extended oil change intervals
– Extended machine life
– Power consumption
![Page 17: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/17.jpg)
1. Benchmark the New Oil
2. Correctly Located Sampling Points
3. Consistent & Correct Sampling Procedure
5. Correct Selection of Appropriate Tests
6.. Immediate dispatch of samples to Lab
4. Clean & Appropriate Sampling Bottles
7.Quality testing by the Lab
8. Quality Interpretation & immediate action to any
abnormal feedback
![Page 18: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/18.jpg)
![Page 19: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/19.jpg)
Strengths & Weaknesses of Oil Analysis
• Detects normal wear particles up to 6-10 microns.
• Determines lubricant additive depletion
• Detects fluid contamination
• Does not detect the onset of abnormal wear – wear particles
in excess of 10 microns
• Does not detect the sources of wear ( bearings, gears, seals,
rings, etc)
• Does not provide information regarding machine condition
![Page 20: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/20.jpg)
Overview of Technologies
Wear Particle Analysis
– Wear particle analysis is a machine condition analysis technologythat is applied to lubricated equipment.
– It provides an accurate insight of a machine’s lubricatedcomponents by examining particles suspended in the lubricant.
– By trending the size, concentration , shape and composition ofparticles contained in a systematically collected oil samples,abnormal wear related conditions can be identified at an earlystage.
![Page 21: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/21.jpg)
Overview of Technologies
Particle Sources
– Bearing
– Gears
– Seals
– Interior surfaces
– External particulates (contaminants)
– Chemical corrosion
– Additives degradation
![Page 22: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/22.jpg)
Overview of Technologies
Wear Metals
Wear Metal Possible OriginAluminum Bearing, Blocks, Blowers, Bushings,
Clutches, Pistons, Pumps, Rotors
Chromium Bearing, Pumps, Rings, Rods
Copper Bearing, Bushings, Clutches, Pistons, Pumps
Iron Bearing, Blocks, Crankshafts, Cylinders, Discs, Gears, Pistons, Pumps, Shafts
Tin Bearing, Bushings, Pistons
![Page 23: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/23.jpg)
Overview of Technologies
Acoustic Emission:
– Rotating equipment and other assets emit high-frequency sound that
provides clues to potential problems:
• Excellent tool for finding air leaks
• Good tool for finding bearing problems
• Lubrication problems can be detected and corrected
• Good tool for finding steam leaks in steam traps
• Can be used to detect electrical faults and many others
![Page 24: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/24.jpg)
Overview of Technologies
What is ultrasound:
– The human ear can only detect sound in the sonic range 20 to 20,000 Hz
– Any sounds that are above the human hearing capabilities are referred toas “ultrasounds”
– A few facts:
• The sounds are directional
• The volume depends on distance from the source
• Sound travels through air and solids
![Page 25: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/25.jpg)
Overview of Technologies
How do you use it:
– An Ultrasonic Gun is required to measure the signal and then heterodynethe signal to an audible signal
Air leak Steam leak Steam Trap
![Page 26: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/26.jpg)
Overview of Technologies
What do you do with it:
– There are two ways to use the ultrasound data.
You can listen to it
Search for leaks, search for faults etc.
– You can measure it
The units are displayed in dB
You can also view a time waveform and spectrum
![Page 27: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/27.jpg)
Overview of Technologies
Thermography:
– Thermography is the study of radiated energy using a thermal infraredimaging system
– Heat can indicate a fault condition
– Temperature can be measured at a point but we will focus on thermographic image
![Page 28: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/28.jpg)
Overview of Technologies
Infrared Thermography
– The camera detects the radiated energy and displays the temperaturegradients. A scale indicates the relationship between colour andtemperature
– The radiated energy is interpreted by the camera to display atemperature at a point or area
The actual temperature indicated may be incorrect
Surface type, wind condition and other factors effects accuracy
![Page 29: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/29.jpg)
THERMOGRAPHY SURVEY
What can Thermography find?
What you see What thermography sees
Overheating electrical connection indicates a serious fire hazard.
![Page 30: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/30.jpg)
THERMOGRAPHY SURVEY
Can you afford not to have a Thermography Survey?
Fire damaged electrical systemCruise Ship Fire
Damage
![Page 31: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/31.jpg)
Applications of Infrared Thermography
– Mechanical
Machines, pipes, bearing and belts
– Electrical
Overhead lines, transformers, motors and control panels
– Steam Systems
– Security Systems
– And many others!
![Page 32: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/32.jpg)
Thermal Comparison to Photographic Image
– Comparing the visual image to thermo-
graphic image reveals the nature of fault
condition
– The temperature scale indicated severity
![Page 33: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/33.jpg)
A few thing to know
– The source of heat may comes from inside the object (tank, machine,
cabinet), but the detector only see the energy emitted from the
surface.
– It is therefore necessary to open cabinets to detect electrical faults
![Page 34: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/34.jpg)
Overheated motor bearing Over 80 °C on bearing housing
50,1°C
81,8°C
60
70
80
![Page 35: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/35.jpg)
66.9°F
202.3°F
80
100
120
140
160
180
200Hot v-belt
stressed due
to wear and/or
misalignment
![Page 36: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/36.jpg)
• Over-heating due
to:
Belt wear
Pulley wear
Pulley misalignment
![Page 37: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/37.jpg)
Overview of Technologies
Motor Testing
– Motor Current Signature Analysis (MCSA) is a conditionmonitoring technique used to diagnose problems in inductionmotors.
– It was first proposed for use in nuclear power plants forinaccessible motors and motors placed in hazardous areas.
– MCSA can be used as predictive maintenance tool for detectingcommon motor faults at early stage and as such preventexpensive catastrophic failures, production outages and extendmotor lifetime.
![Page 38: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/38.jpg)
MCSA – Motor Current Signature Analysis
• Used to generate analyses and trend of electric machines dynamically.
• They aim to detect predictive problems in a rotating electric machine, such as:
Static eccentricity ( Stator)
Dynamic eccentricity (Rotor)
Broken rotor bar problems
Voltage unbalance
Shorted stator turns
Problems on the windings
![Page 39: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/39.jpg)
Induction Motor Fault
Electrical Fault Mechanical Fault
Stator fault Rotor fault Bearing fault Eccentricity
Winding external faults
Broken rotor bars, end rings
Motor Current Signature Analysis
![Page 40: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/40.jpg)
Motor Testing
– Current spectra can be collected on each power leg at the panelusing a current clamp.
– One general comparison that can be made is the amperage drawfrom each leg.
– These should be approximately the same for proper loadbalancing.
– An exceptionally high or low load indicates problems.
– The flux coil is used on the motor rather than on panel. It collectsdata from the flux field generated by the motor. The data can beviewed on a spectrum.
– Flux measurement Indicate Potential problems in windings.
![Page 41: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/41.jpg)
Overview of Technologies
Vibration Analysis
– Can tell us a great dealabout a machine.
![Page 42: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/42.jpg)
Overview of Technologies
Vibration Analysis
– Used to Detect, Analyse and Confirm plant machinery problems. This canbe done in three ways:
• On-line for automated and continuous monitoring and protection ofcritical plant items
• Portable route based data collection and analysis
• Wireless used for remote monitoring of moving or inaccessibleequipment
![Page 43: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/43.jpg)
Typical Machinery Problems that Can Be Found Using Vibration Analysis:
• Unbalance
• Misalignment
• Mechanical looseness
• Structural problems
• Bent shaft
• Bearing faults
Overview of Technologies
![Page 44: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/44.jpg)
• Gear faults
• Belt problems
• Lubrication problems
• Electrical motor faults
• Cavitation and turbulence
• others
Typical Machinery Problems that Can Be Found Using Vibration Analysis:
Overview of Technologies
![Page 45: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/45.jpg)
Which Technology is Applicable?
![Page 46: Training Course on Vibration Analysis Level-1paec.gov.pk/Documents/DNPER/CVCM/CMT.pdf · Training Course on Vibration Analysis Level-1 Centre for Vibration Analysis & Condition Monitoring](https://reader031.fdocuments.net/reader031/viewer/2022012914/5e53705e3f7d4f62f95413d4/html5/thumbnails/46.jpg)