TOP NEW FEATURES 34 - bobcad.com
2
TOP NEW FEATURES Roughing, Blade Finishing, Hub Finishing, Fillet Finishing Simplified geometry selection Machining patterns specifically for impellers/blisks 1. 2. 3. New Toolpath to program impellers/blisks with minimum effort. MULTIBLADE MULTIBLADE Benefits: 1 Roughing and finishing of port geometries Automation for machining from each end Automatic gouge free linking 1. 2. 3. New Toolpath to program ports with minimum effort. PORT MACHINING PORT MACHINING Benefits: 2 Automatic indexing Stock tracking & dynamic holder avoidance Adaptive and offset patterns 1. 2. 3. 5 Axis complex roughing made simple. AUTO 3 + 2 ROUGHING AUTO 3 + 2 ROUGHING Benefits: 3 Optimized toolpath wizard Simplified geometry selection Relative contact point tilt control 1. 2. 3. 5 Axis wall and floor finishing made simple. MULTIAXIS FINISHING MULTIAXIS FINISHING Benefits: 4 Use 3 Axis Toolpaths for 5 Axis Auto tilting tools based on gouge checking Quick to setup and use 1. 2. 3. Tilt tools to avoid collisions based on a few simple settings. 3 TO 5 AXIS CONVERSION 3 TO 5 AXIS CONVERSION Benefits: 5 34
Transcript of TOP NEW FEATURES 34 - bobcad.com
TOP NEW FEATURES
Roughing, Blade Finishing, Hub Finishing, Fillet Finishing
Simplified geometry selection
Machining patterns specifically for impellers/blisks
1.
2.
3.
New Toolpath to program impellers/blisks with minimum e�ort.
MULTIBLADEMULTIBLADE
Benefits:
1
Roughing and finishing of port geometries
Automation for machining from each end
Automatic gouge free linking
1.
2.
3.
New Toolpath to program ports with minimum e�ort.
PORT MACHININGPORT MACHINING
Benefits:
2
Automatic indexing
Stock tracking & dynamic holder avoidance
Adaptive and o�set patterns
1.
2.
3.
5 Axis complex roughing made simple.
AUTO 3 + 2 ROUGHINGAUTO 3 + 2 ROUGHING
Benefits:
3
Optimized toolpath wizard
Simplified geometry selection
Relative contact point tilt control
1.
2.
3.
5 Axis wall and floor finishing made simple.
MULTIAXIS FINISHINGMULTIAXIS FINISHING
Benefits:
4
Use 3 Axis Toolpaths for 5 Axis
Auto tilting tools based on gouge checking
Quick to setup and use
1.
2.
3.
Tilt tools to avoid collisions based on a few simple settings.
3 TO 5 AXIS CONVERSION 3 TO 5 AXIS CONVERSION
Benefits:
5
34
User customizable Y o�set value
Orthogonal or tangential linking
Single and bi-directional sorting
1.
2.
3.
4 Axis turn milling made simple.
TURN MILLING TURN MILLING
Benefits:
6
Model based geometry selection
Auto detect edges, user defined, and exclusion edges
Edge breaking with undercut for 3, 4 and 5 Axis.
1.
2.
3.
Improved part processing e�ciency with in setup part deburring.
DEBURRINGDEBURRING
Benefits:
7
Work O�set Monitoring
Change work o�sets for multiple features at one time
Update work o�set when pasting machining features
1.
2.
3.
Faster / smarter editing of work o�set numbers.
WORK OFFSET UPDATESWORK OFFSET UPDATES
Benefits:
8
Surface Geometry Selection
Surface driven advanced pockets
Surface driven profiles
1.
2.
3.
Reduces / Eliminates geometry creation for advanced pockets.
2D DETECT OPEN EDGES2D DETECT OPEN EDGES
Benefits:
9
Double click edit of machining features
Auto blank machining features
New extended CAM Tree
1.
2.
3.
Less mouse miles, improved visibility, more options.
CAM TREE ENHANCEMENTS CAM TREE ENHANCEMENTS
Benefits:
10
13528 Prestige Place Suite 102 Tampa, FL 33635
www.bobcad.com [email protected] 877-262-2231 | 727-442-3554
