ToolWEB Xtra March/April 2015 - Canada

RFD8008Pocket Power 2.0 15000mAh• Next generation mini jump starter• 250 / 500 Amps for extra cranking power• All protection built internally• New external design for extra comfort• Digital read out for more precise functionality

MTN7190-61" Mini 6" Extended Anvil Impact Wrench• Smallest impact wrench on the market• Lightest impact wrench on the market at 14 lbs.• Most compact impact wrench on the market• 1600 ft-lbs of torque• Fits into tight working areas

The smallest, lightest, most compact 1" impact wrench available today. Well balanced for user comfort and fits into tight work areas where traditional full size impacts cannot get to.

KTI631012 Ton Low Profile Service Jack• Low profile service jack for easy access under low ground clearance vehicles

• Lift range from 3.5" to 18.1"• 45.25" long pump handle for easy pumping under load• Dual pump piston power unit raises saddle to maximumheight in 6.5 full incremental pump strokes with no load

• Saddle diameter 4.3"• 2 Year Warranty on material and workmanship

• Complies with ASME PALD/2009 Safety Standards

VIMMMS6464 Piece Hex And Torx Mechanic'sMaster Set• 1/2 Cut = Better Fit, Higher Torque• S2 Steel, The Strongest Hardest Drivers• Satin Chrome Sockets and Gun Metal Grey Bits• Heat Treated To 58-62 RC• 4 New Sizes, T70 Torx, 13mm Hex, 21mm Hex, 22mm Hex• Approved for hand and power tools• Lifetime warranty

TOOLS

®

NEW

NEWNEW

PLACE YOURORDER TODAY!

MARCH / APRIL 2015

CANTWXTRA

$209.76

$248.75

$1,000.94$214.94

NO TRICKS.JUST TORQUE.

FOLLOW US. #IRTOOLS

Introducing the Ingersoll Rand PowerSocket™ A revolutionary solution that gives your 1/2” impact up to 50% more torque* to bust through REAL WORK. Born from the need to power through stubborn crankshaft bolts, the PowerSocket™ eliminates the need for larger tools and helps you get back to work.

*Results may vary. As tested on the Ingersoll Rand 2235TiMAX (52% increase). Ingersoll Rand 2135 (48% increase) and Ingersoll Rand W7150 (36% increase)

Part# S64M19L-PS

See it in action:WWW.IRTOOLS.COM/POWERSOCKET

NEW PRODUCTS

3

AETAJFPAir Jack Wedges, Pack of 4• All four popular sizes• Made of ballistic nylon• Won’t damage the vehicle• Inflates easily and quickly• Extremely durable

This set includes all four sizes of the worlds most popular Air JackAir Wedges. All Air Jacks feature abladder made out of ballistic nylon,not rubber, which is importantbecause rubber stretches while the nylon won’t. To further aidinsertion, all Air Jacks have a built in stiffener that prevents the wedge from bending when you insert it.

AST3088Digital Tire Pressure Gauge and Auto Emergency Tool• Designed to measure tire pressure and read PSI, BAR, and KPA through a durable metal nozzle

• Pressure is displayed on a bright backlit LCD screen• Constructed with a steel window escape hammer that quickly deploys at the flip of a switch, and a recessed blade to cut through seatbelts

• Constructed with a bright LED flashlight for nighttime emergencies, and a red LED light to reveal the valve stem in poorly lit situations

• Powered by two AAA batteries (not included)

AMG420Lithium-Ion 8V Impact Driver• Compact size of 5-15/16" head design and light weight of 1.82 lbs delivers 67 ft-lbs of max. torque

• 0-2,600 RPM / 0-3,100 IPM forfaster speed applications

• 1/4" Hex bit holder and rubberboots protect tools from exterior damage

• Built-in LED light for convenientillumination during work

• Package includes: 2 x Lithium-Ion8V Battery Packs, 1 x QuickCharger, and Carrying Case

MaxiVideo Digital Inspection Cameras• Turns your MaxiSys tablet into a video inspection scope• USB connector• No external power source needed• Still image or video capture

The MaxiVideo Digital Inspection Camera is designed to work with MaxiSys Seriesproducts or PC based products. It turns your MaxiSys tablet into a video inspectionscope, allowing you to examine difficult-to-reach areas. Records digital still imagesand videos. Provides an economical solution for inspection.

AULMV105 AULMV108• 5.5MM Head • 8.5MM Head

DWSDMM350Pen Style Digital Multimeter• Contains all Multimeter tests needed in one compact size• Pen style shape allows for quick testing between points• Belt strap carry case included • CAT- III 600V safety rating• Easy to read backlit display for reading under the hood or the dash

The Dawson DDM350 is a professional, portable pen-type digital multimeter.Featuring a backlit display and a worklight, this TRMS digital multimeter has all the features you need to get the job done yet small enough to fit in your pocket.

All the featuresto get the jobdone

LAU301050160CRP229 Scan Tool• Android Based 5” ColorTouch Screen

• WiFi-enabled for web browsing• Access all vehicle systems for Read & Clear Codes and Enhanced Live Data• Graph multiple PIDs of live data• Install 3rd party apps

Perform:• Oil Light Resets, Electronic Parking Brakes (open & close), Electronic Brake PadReset, Steering Angle Reset, Battery Registration

• Comes with standard OBD2 16 pin connector, MBZ 38 pin, and BMW 20 pin connectors

• Rugged, Padded Storage Case• Trilingual, English, Spanish, and French

PPRPPSL4Power Probe IV Switch Latch• Allows PPIV to hold Power (+)• Allows PPIV to hold Ground (-)• Allows PPIV to be used hands-free• Removable • Durable construction

$153.08

$20.42

$256.20

$137.87 $119.49

$112.50

$760.87

$4.38

4

NEW PRODUCTS

ESI184Fundamental Electrical Troubleshooting, English and Spanish• Bilingual English and Spanish• Includes 184 Tests • Total of 200 Pages• Covers subjects such as Automotive, Marine, HD, RV, and Equipment

• Real World Problem Solver

Unbelievable 200 page guide to every aspect of electrical troubleshooting. Written by a mechanic for real world, hands-on testing.

Covers topics such as: Batteries/Testing, Relays, potentiometers, resistors, andsolenoids, Voltmeters, Finding shorts to ground, Battery draws, Corrosion causes,Voltage drop, How-to-read

ESI726Digital Battery/Electrical System Tester With Printer• Features programmed test for new Start/Stop Batteries both EFB and AGM types

• Also tests 6 and 12 Volt Standard Lead Acid, AGM Flat, AGM Spiral and VRLA/GEL batteries

• Performs complete starting/charging test on both 12 and 24 Volt Electrical Systems

• Built-in printer prints the results for permanent service records• Removable/replaceable cable set for when the clamps wear out,you can just replace that part

EZRWLC375Rechargeable COB Worklight, 375 Lumens• 3W COB LED• Provides an amazing 375 lumens of bright white light for up to 6 hours of uninterrupted use

• 4000 mah Lithium-Ion battery • 375 Lumens• Slim design for illuminating hard to reach confined areas

JSP78708Steelman PRO All-in-One Rechargeable Light Kit• Anodized Aluminum Body Casing• 2.5 hours of run time on high, up to 8 hours on low• Rotating collar protects charging port from environment• Lithium-Ion battery with direct plug-in recharging system with UL adapter• All-In-One Kit includes: Slim-Lite, 700 Lumen Flashlight, and 2 UV Head Attachments

2 Piece 1/4" And 3/8" Locking Flex Head Ratchets• 84 Teeth give a 4.3° ratchet arc so you can turn a fastener in tight confines• 84 tooth design exceeds ASME torque performance requirements• Enclosed head design for extreme resistance to dirt infiltration• Longer reach handle to access hard to reach fasteners• Available in full polish chrome finish or cushion grip

KDT81274 - Chrome Finish KDT81275 - Cushion Grip

KDT812763 Piece 1/4", 3/8", And 1/2" Locking Flex Head Ratchet Set• 84 Teeth give a 4.3° ratchet arc • Highly visible on/off markings• 84 Tooth Gear Design exceeds ASME torque performance requirements• Enclosed head design for extreme resistance to dirt infiltration• Available in full polish chrome

EZRMR482XLF3 Piece XL Flex Ratchet SetIncluding 1/4", 3/8" and 1/2"• 180 Degree Flex Head• 72 Tooth Drive • Comfort Grip• Low Profile and Reversible• Set includes the EZRMR1412F, EZRMR3818F, and EZRMR1224F

KNP9K008098US3 Piece Automotive Tool Set• Includes three popular pliers in automotive• 10" Cobra Pliers - Adjustment at the touch of a button• 8" Cable Shear - For cutting copper and aluminium cables• 8" Long Nose Pliers With Cutter - Elastic tips: stable even when twisted

• Sturdy packaging with descriptive label

MTN183131 Piece Screwdriver Set, S2 Steel Professional Quality, SAE units• 3 slotted: 1/4" x 6", 3/16" x 4", 5/32" x 4"• 3 Phillips: #2 x 4", #1 x 4", #0 x 3"• 1 bit holder with handle, 4" rectangular magnetic bowl, 1 adapter 31/32"

• 13 bits 31/32", 9-1/4" sockets

$97.28 $136.16

$165.79

$184.90

$156.86

$67.11

$445.88

$96.70

$176.63

$21.16

NEW PRODUCTS

5

KEN29999ValvecapperPRO Cap and Core Remover/Installer• 4 tools in 1 • Cap and core remover/installer• Longer valve cap grip works on flow-through, double seal valve caps• No more moving rig to position valve stems just to get to the caps• No more dropped caps - holds onto caps and valve cores for removing and replacing

KEN35361Automotive Wheel Weight Hammer• Designed for installing and removing clip-on style wheel weights on automotive and light truck

• Cast steel head has anti-marring replaceable hammer face• Safe for use on steel, aluminum and chrome• Replaceable chromoly steel hook removes all clip-on wheel weights• No modification needed to fit smaller wheel weights

KEN35359Heavy Duty Universal Wheel Weight Hammer• 34% larger strike area than typical wheel weight hammers• 28 oz. cast steel head with anti-marring replaceable hammer face• Replaceable chromoly steel hook removes all clip-on wheel weights• No need to modify to fit smaller weights• Fiberglass handle with ergonomic industrial grip is chemicalresistant and 4 times stronger than wood

KDT8224018 Oz. Dead Blow Hammer• Shot filled head for reduced rebound• Polyurethane is resistant to cuts, splits, and abrasion• Resistant to gas, brake fluid, anti-freeze, and other solvents• Rubber Handle (TPV like GW screwdrivers) for grip and comfort• Non-Marring Polyurethane head

Polyurethane Dead Blow Hammers deliver Professional Performance at a GearWrench Value.

KDT8224232 Oz. Dead Blow Hammer

KDT8224349 Oz. Dead Blow Hammer

VIMTMS7777 Piece Elite Series Master Torx Set• 1/2 Cut = Better Fit, Higher Torque• S2 Steel, the strongest and hardest drivers• Heat treated to 58-62 RC• Satin Chrome Sockets • Gun Metal Grey Bits• Approved for hand and power tools• Lifetime warranty• 77 Piece Set comes in a durable, plastic case

Set Includes: T6 - T70 - Standard Torx, TR8 - TR60 - Tamper Proof Torx,E4 - E24 - Torx Sockets, IP8 - IP60 - Torx Plus, IPR - IPR 60 -Torx Plus, 5 PointEP4 - EP24 - Torx Plus Sockets

TOOLS

®

SCH88750BSuper Duty 6 & 12 Point O2 Wrench with SP Grip Drive• "SP Grip Drive" is designed to contact the O2 sensor hex in the body of the sensor not on the hex tips

• Conventional sockets / wrenches can easily round off the hex tips• "SP Grip Drive" provides greater torque capabilities needed toremove rusted or frozen O2 sensors found on many of today's vehicles

• Two sided wrench featuring 6 & 12 point configurations with sensor wire opening• 2X the number of clock angle positions improving accessibility and performance• 22mm wrench with notched opening is designed for non-shielded O2 sensors with wire connection leads

SCH93750BSuper Duty 6 & 12 Point O2 Wrench With SP Grip Drive

KNKKK4-1/4-3/4KnKut 1/4-3/4 inch Fractional Performance Step Drill Bit• Made from special moly alloy steel and gold surface treated for maximum lubricity• Dual flute construction drills clean accurate holes in thin materials• Use for all thin metals, rigid plastics such as Plexiglass and wood or compositematerials with a thickness equal to or less than the step thickness

• Gold surface treated • Enlarges holes 1/4" - 3/4" • 10 sizes

KNKKK4-1/8-1/2KnKut 1/8-1/2 Fractional Performance Step Drill

AST4550AAir Operated Paint Shaker• New and improved clamp size toaccommodate container size rangingfrom pint to gallon and even largerEuropean paint containers

• Patent pending orbital drivemechanism

• Lightweight, heavy duty construction,compact design

• Includes oiler and 1 year warranty

VIMAH100Soft Tip Air Hammers• Non-sparking • Non-marring for sensitive surfaces

• For aluminum body cars • Replaceable drive heads• 3 Piece Set includes (1) Aluminum Hammer, (1) Brass Hammer, and (1) Nylon Hammer, .401 Shank Tools • Lifetime warranty

TOOLS

®

$15.75

$56.28

$64.88

$27.68

$37.08 $48.77

$311.85

$34.53

$42.62

$80.36

$61.83

$283.36

$76.00

6

NEW PRODUCTS

8 Piece 1/4" and 3/8" Drive Stubby Hex Bit Socket Sets• Reduced overall length provides better access in tight spaces• S2 Steel for strength and durability• Professional, full polish chrome• Hard stamped size identification• Set includes GearWrench Socket Rail

Improved access with stubby hex, metric and SAE, stubby triple square and long triplesquare bits. expanded bit socket listing to meet user requirements.

KDT80281 - Metric

3/8" and 1/2" Drive Triple Square Sets• Professional, full polish chrome • Hard stamped size identification• Set includes GearWrench Socket Rail

Improved access with stubby hex, Metric and SAE, stubby triple square, and long triple square bits. Expanded bit socket listing to meet user requirements.

KDT80874 - 5 Piece, Long • Extended range including 8,10,12,14, and 16mm• All 3.94” overall length for reach

KDT80744 - 6 Piece, Stubby • Reduced overall length provides better access in tight spaces• Overall length: 3/8” Dr. 1.9”, ½” Dr. 2.17”, Sizes: 8, 10, 12, 14, 16, and 18mm

KDT8089813 Piece 1/4", 3/8", and 1/2" Drive Stubby Torx Bit Set• Reduced overall length provides better access in tight spaces• S2 Steel for strength and durability• Professional, full polish chrome• Hard stamped size identification• Set includes GearWrench Socket Rail

Improved access with stubby hex, Metric and SAE, stubby triple squareand long triple square bits.

KDT809859 Piece 3/8" Drive Universal E-Torx Bit Socket Set• Universal joint allows access when you cannot get directly on a fastener• Optimized overall length provides betteraccess in tight spaces

• Professional, full polish chrome• Hard stamped size identification• Set includes GearWrench Socket Rail

KDT809945 Piece 1/4" Drive Universal Stubby Torx Bit Socket

KDT8105211 Piece 1/4" and 3/8" Drive Universal Stubby Socket Set• Universal joint allows access when you cannot get directly on a fastener• Optimized overall length provides better access in tight spaces• Professional, full polish chrome • Hard stamped size identification• S2 Steel for strength and durability

Universal sockets increase access. Expanded universal socket listing with range for use on different types of fastener sizes.

KDT810708 Piece 1/4", 3/8" and 1/2" Universal Stubby Triple Square Set• Universal joint allows access when you cannot get directly on a fastener• Optimized overall length provides better access in tight spaces• Professional, full polish chrome • Hard stamped size identification• Set includes GearWrench Socket Rail

Universal sockets increase access. Expanded universal socket listing with range for use on different types of fasteners.

KDT810887 Piece 1/4" and 3/8" Drive Universal Metric Stubby Hex Set

KDT811009 Piece 1/4" and 3/8" Drive Stubby Triple Square Bit• Length provides better access in tight spaces• Satin finish• Hard stamped size identification• Set includes GearWrench Socket Rail• Not for use with impact drivers• Bit drivers increase access by fitting directly onto the ratchet tang.Ex. 1/4" bit driver 0.75" and a 2 piece bit socket 1.5" length

KDT8118010 Piece 1/4" Drive Phillips and Slotted Bit Driver• 1” length to provide better access in tight spaces• Set includes GearWrench Socket Rail• Satin finish • Hard stamped size identification• Bit drivers increase access by fitting directly onto the ratchet tang. Ex. 1/4" bit driver 0.75" and a 2 piece bit socket 1.5" length

9 Piece 1/4" Drive Stubby Hex Bit Driver Sets• 1” length to provide better access in tight spaces• Satin finish • Hard stamped size identification• Set includes GearWrench Socket Rail • S2 steel for strength and durability• Bit drivers increase access by fitting directly onto the ratchet tang. Ex. 1/4" bit driver 0.75" and a 2 piece bit socket 1.5" length

KDT81149 - SAE KDT81160 - MetricKDT8119610 Piece 1/4" and 3/8" DriveStubby Torx Bit Driver Set

Milton Hybrid PVC Red Hose• 300 PSI MAX• Hybrid PVC Construction resists kinking• Hose remains flexible down to -40 degree F/C• NPT Brass EndsBend Restrictor provides stress relief for hose

Milton Red Hose 300 PSI MAX. Hybrid PVC construction resists kinking. The hose remains flexible down to -40 degree F/C. 1/4", 3/8" or 1/2" NPT Brass Ends. Bend Restrictor provides stress relief to extend the life of the hose.

Part # Description Price

MILMA1250OR 1/2” x 50’ Hybrid PVC Red Hose








$48.42 $48.42

$43.42

$53.29

$62.19

$60.99

$48.46

$82.17

$64.98

$60.79

$48.27

$32.76

$28.77 $28.77$36.80

KDT80291 - SAE

$104.31

$84.53

$30.75

$47.42

$124.22

$43.19

$54.72

$69.19

NEW PRODUCTS

7

MAY373259 Piece Pneumatic Hammer Set• .401 Parker Shank• High Quality S2 Tool Steel• Full Shank Heat Treat• Black Oxide Finish• Lifetime Warranty

Set Includes: MAY31982 - 4” Hammer, MAY31987 - 6" Pneumatic Hammer,MAY31963 - 6" Smoothing Hammer, MAY31964 - 6" Concave Hammer,MAY31962 - 8" Pneumatic Hammer, MAY32001 - 12" Pneumatic Hammer,MAY32002 - 18" Pneumatic Hammer, MAY32003 - 24" Pneumatic Hammer andMAY32005 - 1 1/4" x 4" Hammer

MITMVA662Ford Power Steering Bleed Adapter

MITMVA661GM Power Steering Bleed Adapter• Custom design to fit late model GM vehicles• Aids in eliminating rapped air from GM power steering system• Designed for use with Mityvac Hand Pump• 90-degree adapter fitting available • Non-slip design for easy installation

MITMVA665Right Angle Connection Adapter• Allows convenient use of power steering bleed adapters in applications with limited access

• Swivels 360° for optimum accessibility• Threads directly into adapter body in place of standard straight barb• Works with both the MVA661 and MVA662 bleed adapters

IRT2235QTiMAX-21/2" Quiet Titanium Impact Wrench With Extended Anvil• 1,300 ft-lbs. of nut busting torque and a weight of only 4.6 lbs.• At 91.9 dBA, IR Quiet Technology reduces noise without compromising power

• Weight: At only 4.6 pounds, no other impact wrench on the marketcan match the combined power and weight of the 2235 Series.

• 2-Year Warranty, one-handed forward/reverse control, feather-touchtrigger, and 4-position power regulator

IRT2235TiMAX-21/2" Titanium Impact Wrench With Extended Anvil• 1,350 ft-lbs. of nut busting torque and a weight of only 4.6 lbs.• Power: Powered by Ingersoll Rand’s finely tuned twin-hammerimpact mechanism. From the garage to the most demandingindustrial sites, there is no job that will standin its way

• Weight: At only 4.6 pounds, no other impact wrench on the market can match the combined power and weight of the 2235Series. With less weighing you down, you can work harder andfaster for longer stretches of time

• Reliability: Every component, every mechanism and every functionof the 2235 Series has been put through hell to ensure it always performs in theface of the toughest jobs. Backed by a Two-year warranty, the 2235 Series is a finelytuned workhorse, from its components to its technology, to be the impact wrenchyou can always count on to get REAL WORK done

• 2-Year Warranty, one-handed forward/reverse control, feather-touch trigger, and 4-position power regulator

IRT2135QXPA-21/2" Composite Quiet Impact Wrench With 2" Extended Anvil• Power: Punish the toughest bolts with 1,100 ft/lbs of Nut Busting Torque. All powered by Ingersoll Rand’s finely tuned motor and twin-hammer impact mechanism. Extended anvil version

• Sound Reduction: Ingersoll Rand’s Quiet Technology reduces the sound of the tool. Sparing your ears without sacrificing a single ounce of power

• Weight: At only 4 pounds, the 2135QXPA is as light as it is powerful so your hand tires less, letting you get more work done

• Reliability: Backed by a one-year warranty and rigorously tested, every component,mechanism and function of the 2135QXPA has been pushed to the limits to ensure it always performs in the face of the toughest jobs

• Price: Delivers an incredible level of performance and power at a cost that won’tpunish your wallet

Quiet Technology

Quiet Technology

UVU330500ASpotgun Jr. Single Shot Injection System• Spotgun Jr. Injection Gun with R-12 and R-134a adapters

• A/C ExtenDye Cartridges (6 x 1/4 oz.)• A/C ExtenDye with QuietCool Technology• Services up to 6 vehicles with service stickers included• Rugged storage case

The world's best selling Spotgun Leak Detection Injection System. UView A/C ExtenDyeis super concentrated to detect leaks quickly, saving time and money. The QuietCoolTechnology additive package boosts performance and increases longevity of the A/Csystem. ExtenDye is SAE J2297 certified, hybrid safe, and is solvent-free.

UVU331500ASpotgun Jr. Injection System with ExtenDye• Spotgun Jr. Injection System with R-12 and R-134a adapters

• A/C ExtenDye Cartidges (2 x 1 oz.)• A/C ExtenDye with QuietCool Technology• Services up to 40 vehicles and includes service stickers

• Rugged storage case

UView A/C ExtenDye is super concentrated to detect leaks quickly, saving time and money. The QuietCool Technology additive package boosts performance andincreases longevity of the A/C system. ExtenDye is SAE J2297 certified, hybrid safe, and is solvent-free.

UVU399006AA/C Extendye Cartridge 1/4 oz.• Super concentrated dye detects leaks quickly• Added friction modifier and anti-wear additive improvesefficiency and reduces wear

• Antioxidant stops acid formation and prolongs oil life• Works exclusively with the Spotgun Jr. Injection System• SAE certified for use in R-134a and R-1234yf Systems

ExtenDye is J2297 certified, hybrid safe, and solvent-free.

UVU399006AEUA/C ExtenDye Winged Cartridge 1/4 oz., Pack of 6

$274.60

$33.65

$33.65

$21.75

$466.97

$347.61

$458.26

$92.22

$62.08

$4.19

$4.19

8

NEW PRODUCTS

UVU499024AA/C ExtenDye 1 oz. Bottle, Pack of 6• Super concentrated dye detects leaks quickly• Added friction modifier and anti-wear additive improves efficiency and reduces wear

• Antioxidant stops acid formation and prolongs oil life• SAE certified for use in R-134a and R-1234yf systems• QuietCool Technology• Pack of 6 - 1 oz. bottles.

UView A/C ExtenDye is super concentrated to detectleaks quickly, saving time and money. The QuietCoolTechnology additive package boosts performance andincreases longevity of the A/C system. ExtenDye is SAEJ2297 certified, hybrid safe, and is solvent-free.

UVU499012AA/C ExtenDye Bottle 1/4 oz., Pack of 12

UVU332010ASpotgun Jr. Leak Detection Kit with True UV LED Lite and ExtenDye• 6 LED True UV LED Light (3 AA batteries included)

• Spotgun Jr. Injection Gun with R-12 and R-134a adapters

• A/C ExtenDye Cartridge (1 oz.)• UV enhancing glasses and servicestickers • Rugged storage case

The world's best selling A/C UV Spotgun Leak Detection System with True UV LEDlight. UView A/C ExtenDye is super concentrated to detect leaks quickly, saving timeand money. The QuietCool Technology additive package boosts performance andincreases longevity of the A/C system. ExtenDye is SAE J2297 certified, hybrid safe,and is solvent-free.

UVU332220ASpotgun Jr. UV Leak Detection Kit with ExtenDye and Pico-Lite• Pico-Lite 1 watt LED (3 AA batteries included)

• Spotgun Jr. Injection System with R-12 and R-134a adapters

• A/C ExtenDye Cartridges (2 x 1oz.)services up to 20 vehicles

• UV enhancing glasses and service stickers

• Rugged storage case

CSI90-700 AC Zero Leak Stop Leak• Specially formulated to stop small leaks• Designed not to hurt A/C Systems• Non-Hardening Polymer Free• Compatible with POE / PAG / Mineral BasedA/C Lubricants

• Great as preventative maintenance

Seals Leaks safely without damaging system components. Avoid the hassle and expense of replacing seals, or other parts. Helps prolong the life of systemcomponents. Helps stops corrosion from spreading.

MSC20300300 CFM Blower fan• Copper motor windings• 900 to 1750 RPMs• Two (2) built-in 11 amp grounded receptacles

• Four (4) position adjustments• Variable speed position switch

300 CFM Blower Fan with copper motor windings, 900 to 1750 RPMs, variable speed control position switch. Adjustable to four (4) different positions with two (2) built-in 11 amp grounded receptacles. Constructed of ABS plastic with built-in overload protection.

MSC52300Infrared Thermal Imaging Tool• Large LCD color screen• UFPA: 32 x 31 pixels• Measures from -4 to 482 F• Save 25,000 image to micro SD card• Thermal sensitivity 0.1 C

Easily pinpoint cold and heat signatures for accurate diagnosis of manyautomotive components. Multi mode function and screen color options.Thermal sensitivity of 0.1 C, includes carrying case, 8GB micro card capableof storing 25,000 images, CD, USB cord, and batteries and instructions.

MSC55900SAE Certified J2791 (134A) J2913 (1234yf) Leak Detector• Detects all Refrigerants as low as 1/10 oz. per year

• Eliminates many false responses• Heated Tin Oxide Element• High, Medium and Low sensitivity

The 55900 meets and exceeds all certification required by SAE for all refrigerantsincluding the new R1234yf. The intelligent microprocessor and sensor designeliminates many false responses from common automotive materials. High, Mediumand Low sensitivity with a 2000 hour sensor life. Six multi-colored LED lights displaywith alarm. Peak feature to assist with detection of multiple leaks.

MSC91050-6Pressurized AC Flush Replacement Can for 91051, Pack Of 6• Pressurized to 150 PSI• Non-toxic • Self evaporating• Disposable cans

MSC91051Quick Shot Complete AC Flush Kit• Complete AC Flush Kit• No shop air needed • Pressurized to 150 PSI• 17 oz. of non-toxic, self evaporating flush• Disposable can

Complete AC flush kit pressurized to 150 PSI, no need forshop air or bottled flush. Contains 17 ounces of non-toxic,self evaporating AC flush with hose and nozzle. Disposablecan with replacement can capability.

MSC91050Replacement Can For AC Flush Kit 91051

MSC212001200 CFM Blower Fan with Variable Position Switch

$72.34

$98.95

$2.68

$8.35

$45.82

$83.23

$796.88

$258.75

$137.50

$24.27

$46.77

$122.81

TMR SPOTLIGHT

9

Round Universal Tire Repair Patch• Most Popular Universal Tire Repair• Designed For Chemical Vulcanization• Black Vulcanizing Gum, Blue Poly Backing• Made In USA

TMRTI731Small Round Universal Tire Repair Patch, 1-3/4", Box of 30TMRTI732Medium Round, 2 1/4", Box of 25TMRTI733Large Round, 3 1/8", Box of 15

Quill Seal Patch Plug, Box of 20• For Use In Radial And Bias Ply Tires• Designed For Chemical Vulcanization• Equipped With Metal Quill for Easy Installation

• Made In USA

TMRTI6011-3/4" Round, 3/16" StemTMRTI6021-7/8" Round, 1/4" StemTMRTI6032-1/4" Round, 5/16" Stem

Tire Patch Lead Wire Combo• For Use In Radial and Bias Ply Tires• Designed for Chemical Vulcanization• Stem Portion Is Dip Coated With Premium Vulcanizing Gum • Made In USA

TMRTI6601" Round, 1/8" Stem, Box of 20TMRTI6611-3/4" Round, 1/4" Stem, Box of 24TMRTI6622" Round, 5/16" Stem, Box 24TMRTI6632" Round, 3/8" Stem, Box of 24

TMRTI831Mushroom Plug Kit With 65 Inserts• Kit Includes 5/16" and 7/16" OrangeVulcanizing Inserts

• Mushroom Plug Gun• 8 oz. Chemical Vulcanizing Cement• Pistol Grip 2-Stage Rasp

TMRTI93Heavy Duty Split Eye Needle Tire Repair Tool• 4" Replaceable Needle• Composite Plastic/Rubber Grip• Weighted Handle With Metal Core

TMRTI17Die-Cast T-Handle• For Cleaning Hole Injuries During Tire Repair Service

• Includes 5 1/2" Replaceable Needle,TMRTI16-N

TMRTI755Passenger String Tire Repair Kit• Kit Includes 50 String Repairs• All Tools Included to do a Temporary String Repair

• Comes in Molded Case • Made In USA

TMRTI100-100Black Plastic Tire Valve Stem Cap, Box of 100• Universal Fit• Great Sealing• Black Plastic Tire Valve Stem Cap

TMRTI261TSoft Face Dead Blow Slimline Hammer• Face Diameter 1-1/4", Head Length 4 3/16", Overall Length 10 5/8"

• Perfect For Wheel Weight Installation• Weight 18 oz • Made In USA

TMRTI117Green Plastic Sealing Cap,100 Per Box• For the prevention of dirt anddebris in TPMS Sensors andStandard Valve Stems

• Green Cap identifies thepresence of Nitrogen in the tire

TMRTI114Long Plastic Cap ForTMRTR20008, Box of 100• Long plastic cap specificallyused for 20008 Snap-In StyleTPMS Valve Stems

• Used for the prevention of dirtand debris in the sensor

$7.23

TMRTR25306Standard TPMS Plastic Gray Cap, 100 Per Box• TPMS Specific Gray PlasticSealing Cap

• For the prevention of dirt anddebris in TPMS Sensors

$5.80 TMRTR25040TPMS Nickel Plated YellowBanded Valve Cores, Box of 100• TPMS Specific Nickel PlatedValve Cores

• Nickel plating does not causecorrosion with TPMS Sensor

$15.44

Snap-In Tire Valves, Box of 50TMRTR413• Height/Length 1 1/4" • .453" Valve Hole

TMRTR414• Height/Length 1.50"• .453" Valve Hole

TMRTR418• Height/Length 2.00"• .453" Valve Hole

TMRTS8749Heavy Duty Vertical Free Standing Commercial Tire Spreader• Commercial heavy duty construction

• Vertical free standing• Spread action 8" to 10" (2 Settings)

• 35" Height, 50 Lbs• Balanced for free standing

QUICK ANDEASY

INSTALLATION!

SOLUTION FOR STEEL

WHEEL WEIGHTINSTALLATION!

TR413 TR414 TR418

$94.83$22.77 $14.20

$42.29

$8.37$20.06

$19.37

$8.71 $19.44$28.13

$9.30 $21.49$29.37

$33.04

$0.94$2.69

$28.84

$9.83

$16.07

$16.97

$267.86

10

NEW PRODUCTS

CPSFX1234Advanced 1234 Refrigerant Management Center• 7" Color touch screen control panel• Patented oil-less compressor• Patented motor-controlled ball valves• SAE J2843• 1-2-5 Warranty

CPS Automotive presents the latest in ease andendurance with its FX Series line of AC RRRequipment. The new Management Center quicklyand efficiently recovers, recycles, and rechargesautomotive AC systems.

CPSFX1234WAdvanced R1234 RefrigerantManagement Center

CPSFX3030WAdvanced Dual Gas RefrigerantManagement System• Dual refrigerant management system• 7" Color touch screen control panel• Patented oil-less compressor• SAE J3030• 1-2-5 Warranty

Dual Refrigerant Gas R134a and R1234Management Center that quickly andefficiently recovers, recycles, and recharges automotive AC systems.

KSLST5501K-Seal™ Permanent Coolant Leak Repair• Multi purpose seals head gaskets, radiators, heater cores etc.

• Easy to use, just pour and go• Permanent leak seal• Satisfaction guaranteed

TRATP22000102CSCool Seal™ Bottled A/C Leak Sealer• NON-Polymer formula• Safe for A/C systems and recovery equipment• Meets SAE J2670 standard• Seals slow pesky leaks• Single billable• Services 2 vehicles

Seals slow, pesky leaks in compressors, condensers,evaporators, and other A/C system components −quickly and permanently! Most economical!

TRATP22700102CSCool Seal™ BigEZ™ A/C Leak Sealer Cartridge• NON-Polymer formula• Safe for A/C systems and recovery equipment• Meets SAE J2670 standard• Seals slow pesky leaks• Services two vehicles

Seals slow, pesky leaks in compressors, condensers, evaporators and other A/C system components − quickly and permanently! Most versatile! Works with BigEZ™, EZ-Shot™, and most popular caulking gun-style injectors.

Safety Lock Coupler R134A Coupler• Locking sleeve prevents accidental coupler removal• Releases with manual operation of coupler• Heavy duty low refrigerant loss design

MSC91049-32AC Flush Solvent, 32 Oz. Bottle• Non-toxic • Self-evaporating• Flush all AC components • For use in all standard flush kits

MSC91049-32-6AC Flush Solvent, 32 Oz. Bottle, Pack of 6

MSC91049-128-4A/C Flush Solvent 1 Gallon Bottle, Pack of 4

TRATP2210CSCool Seal™ A/C Leak Sealer Syringe Injector Kit• Non-Polymer formula• Safe for A/C systems and recovery equipment• Meets SAE J2670 standard• Seals slow pesky leaks• Single billable

Seals slow, pesky leaks in compressors, condensers, evaporators and other A/C system components − quickly and permanently! Easy to use!

TRATP2211CSCool Seal™ A/C Leak Sealer Replacement Syringe• Non-Polymer formula• Safe for A/C systems and recovery equipment• Meets SAE J2670 standard• Seals slow pesky leaks• Single billable

Seals slow, pesky leaks in compressors, condensers,evaporators and other A/C system components − quickly and permanently! Prefilled and disposable!

Frieght Pre-Paid

Frieght Pre-Paid

MSC82834-SLHigh Side

MSC82934-SLLow Side

Frieght Pre-Paid

$9,135.94

$6,737.50

$7,289.06

$17.22

$53.44

$71.25

$38.96

$38.96

$185.63

$16.40 $95.63

$48.78

$35.64

NEW PRODUCTS

11

CPSFX134AAdvanced R134A RefrigerantManagement Center• 7" Color touch screen control panel

• Motor-controlled ball valves• 1-2-5 Warranty• SAE J2788H• Displays maximum load up to 220 lbs

MSSACX1180ArcticPRO Refrigerant Handling System• ArcticPRO for Refrigerant R134a• Recover, Recycle and Charge R134a systems

• Quicker service times• Premium high-flow capacity solenoids• 2 Year Parts and Labor Warranty

MSSACX1280ArcticPRO R1234yf Refrigerant Handling System• ArcticPRO AC X1280 for RefrigerantR1234yf

• Features fully automatic servicing• Recovers over 95% of automobileA/C system refrigerant

• Meets stringent SAE J 2843 standard• 2 year warranty

MSSACX1180HArcticPRO R134a Refrigerant Handling System On Hybrid Vehicles• ArcticPRO ACX 1180H for Refrigerant R134a on Hybrid Vehicles

• Fully automatic operation• Charge from High or Low side• Refrigerant flush • 2 year warranty

Service Solutions

ROBAC1234-61234YF ACS Recovering, Recycling and Recharging Machine• Fully automatic operation — program for service, walk away and return when complete

• Services both standard and hybrid vehicle A/C systems

• 95% recovery efficiency• Integrated refrigerant identifier (meets SAE J2927)• 1/4 Color VGA display and on board printer

ROB34788NIA/C RRR and Evacuate Unit• Fully automatic operation• Improved recovery and charge performance -Exceeds SAE requirements

• Graphical display• Expandable - capable of additional feature and function add-ons (printer, wireless, refrigerant ID)

• Automatic Internal tank fill

ROB34788NI-HA/C RRR Machine For Hybrid Vehicles• One machine to safely service both conventional and high voltage A/C systems

• Fully automatic operation• Improved recovery and charge performance -Exceeds SAE requirements

• Expandable - capable of additional feature andfunction add-ons (printer, wireless, refrigerant ID)

• Automatic internal tank fill

How can Robinair's industry leading 34788 A/Crecover, recycle, and recharge A/C machine get anybetter? Here's how. The new Robinair 34788NI is acombination of easy use and superior accuracy. Itrecovers, recycles, evacuates, leak tests, and recharges R-134a quickly and accurately.The fully automatic function will recover, vacuum, leak test, and charge on its ownwithout the need to stand and monitor the machine. The product is fully SAE J2788compliant and meets new SAE refrigerant recovery standards for servicing vehicleswith high voltage compressors.

PMS-185 and black

P

Frieght Pre-Paid

Frieght Pre-Paid

Frieght Pre-Paid

Frieght Pre-Paid

Frieght Pre-Paid

Frieght Pre-Paid

Frieght Pre-Paid

$5,453.13

$5,870.71

$5,870.71

$11,416.32

$9,057.15

$6,073.47

$6,118.63

12

MUST-HAVE ITEMSLithium Powered Battery Packs

RFDPPJS2976DLXPortable Power Source/Mini Jump Starter• Back up power supply for your personal devices including phones, notebooks, lap tops, etc

• Three onboard power ports; 19v for laptops, 12v for standard 12v accessories and 5v for charging any standard USB device

• Has the ability to jump start a variety of vehiclesincluding cars, pick ups, ATV's,snowmobiles, personalwatercraft, etc

• Includes a lighted chargeindicator, overcharge and discharge protection and auto off switch

• 200 cold cranking AMPS and 400 Peak cranking AMPS

RFD4902Pocket Power XD Mini Jump Starter• 300 / 600 amp rating• New intelligent cable with built-in over charge, reverse polarity protection and reset switch

• Jump oversize vehicles• Includes 8 computer recharging tips and 4:1 pigtail phone charger tips• 2 USB charging ports in addition to a 19V and 12V charging ports

New 18mAh mini jump start with a 300 / 600 amp rating. Includes the new intelligentcable with reverse polarity protection and a reset switch. 18,000mAh battery.

RFD8006A7500mAh Cigarette Lighter Battery Charger• Charge your battery for less than 10 minutesand start

• Inputs for devices such as phone and tablet• No need for jumper cables• Recharges in 4 hours

Throw away your battery cables! Simply pluginto your cigarette lighter and wait 10 minutes. Start your car without ever leaving the vehicle!

RFD8006B7500mAh Cigarette Lighter Battery Charger• Charge your battery for less than 10 minutes and start

• Input for devices such as phone and tablet• No need for jumper cables• Recharges in 4 hours

Throw away your battery cables! Simply plug into your cigarette lighter and 10 minutes. Start your car without ever leaving the vehicle!

Air Tools

IRT116Standard Duty Air Hammer• Up to 3,500 blows per minute• Handles a range of cutting applications• Longer life alloyed steel barrel and heat-treated piston

The economical air hammer for fast cutting action, especially formedium exhaust system, panel cutting, and general repair work.

IRT117Standard Duty Air Hammer• Longer stroke piston• Alloyed steel barrel and heat-treated piston for longer life

• Up to 2,000 blows per minute• Built in power regulator and trigger control

An economical air hammer with a longer piston stroke, this tool is designedfor exhaust work, bolt cutting, and front-end work. The trigger control and abuilt-in power regulator give you full control of the speed and power.

IRT105-L21/4" Drive Mini Air Ratchet with Extended Head• Extended head offers a longer reach for those hard to reach areas

• 25 ft-lb max torque and 250 rpm free speed • Unique head construction provides improved durability and more consistent performance over the life of the tool

• Low-profile forward/reverse control has a wide diameter• Ergonomic coupling nut and handle ensure a comfortable grip with no sharp edges

IRT1077XPA1/2" Drive Air Ratchet• 54 ft./lbs of maximum torque• Variable speed lever style throttle• 360 degree adjustable exhaust directs air away from the operator and the work• Free speed: 160 rpm • Weighs 2.75 lbs.

IRT2115QTiMAX3/8" Drive Quiet Air Impactool™• Patented technology silences the tool without sacrificing the power required for tough applications

• 300 ft-lbs max power in reverse - best in class performance • Enhanced power settings • Feather touch trigger and patented push button forward/reverse provide maximum control

• FREE two-year limited warranty with tool registration

Free speed: 15,000 RPM, 1500 BPM, sound dBa: 93.2, Minimum hose size: 3/8", Average air consumption: 4 cfm

IRT231HA-21/2" Drive Super Duty Air Impact Wrenchwith 2" Extended Anvil• In-handle exhaust directs air away from user• Contoured comfort handle• 590 ft./lbs. maximum torque• Pressure feed lubrication system• Adjustable power regulation

IR's elite mechanism is the perfect balance between superior power and proven durability. Featuring a 2" extended anvil with all the performance benefits found in the IRT231HA. Ideal for tire changing and use with flip sockets.

$69.70

$87.12

$164.32

$156.29

$328.45

$230.40$268.47

$126.28

$126.28

$174.58

MUST-HAVE ITEMS

13

IRT2190Ti1" Drive Titanium Impact Wrench• Perfect for applications where high-quality is essential

• Reduced vibration• Maximum torque: 1,600 ft./lbs.• Free speed: 6,800 RPM

Designed specifically for tire changing, the chainsaw handle provides comfortablecontrol for the operator. The Titanium IRT2190TI delivers devastating torque in alightweight package. Also features a ergonomically designed handle for better controland comfort and a bottom exhaust with muffler. Working torque: 150-1,200 ft./lbs.;Average air consumption: 12 CFM; Air inlet size: 1/2"; Sound dBA: 103.0/117.0;Minimum hose size: 1/2"; Weight: 13.5 lb.; Length: 21.5.

IRT2190Ti-61" Drive Titanium Impact Wrench with 6" Extended Anvil

Air Tools

IRT311ADual Action Quiet Air Sander with 6" Pad• Low vibration• Dependable performance• Balanced ball bearing construction• Adjustable built-in regulator for positive speed control

A built-in silencer muffles noise as you work with thiseconomical dual action sander. It's a quality sander used for feather edging, metal preparation and finish work on body filler. The dual action pad motion produces swirl-free finishes.

IRT328B8" Air Orbital Sander• Dual action pad motion (5/32" orbit)• A long-life, vibration free performance• Balanced ball bearing construction• Free speed: 825 RPM

IRT4152Vacuum Ready Random Orbital Air Sander• 12,000 rpm free speed for swirl-free finishes• Durable, lightweight composite design weighs less than 2 lbs.• Lubrication free motor

The IRT4152 sets a new standard in elite automotive finishwork. The fine 3/32" orbit sander helps set the standard for high quality paint finishes. The IRT4152 utilizes a precision groundcounterbalance to reduce vibration. The lubrication-free motor package eliminates worry of exhaust contaminants harming the work surface.

CPT78231/4" Drive Compact Ratchet with 4 Position Swivel Head• 4 Position Swivel Head for easy access and maneuverability• 250 RPM of Speed - turns out the work fast• Compact and lightweight - fits in the palm of your hand• Rear Exhaust keeps air away from the work area• 15 ft/lbs of Torque - all the torque needed for the 10mm and smaller fasteners

CPT8241/4" Drive Standard Duty Air Ratchet

CPT828-H1/2" Drive Heavy Duty Air Ratchet • Features CP's new anti-slip head design which virtually eliminates slippage while reducing the potential for heat build-up, even in long run downs

• Compact, yet packed with power and speed• Efficient 112 hp motor provides up to 50 ft./lb. of torque• Advanced head design provides dramatically longer life• Teasing throttle for precise speed control

Working torque: 10-50 ft./lbs.; Maximum torque: 50 ft./lbs.; Free speed: 150 RPM;Average air consumption: 3.75 cfm; Air inlet thread: 1/4" NPTF; Minimum hose size: 3/8"; Sound dBA: 96.5; Length: 10"; Weight: 2.4 lbs.

CPT7748-21/2" Drive Composite Impact Wrenchwith 2" Extension• Extreme torque: 922 ft.lbs of maximumtorque in reverse

• Extra resistance: Durable steel aluminum alloy back housing

• Insulation and comfort: Thermo-plastic rubberinjected in housing for a durable andcomfortable grip

• Universal and durable twin hammermechanism

• Flexible: 360° swivel air inlet

The new Chicago Pneumatic CPT7748-2 is a durable and powerful ½” impact wrench inthe entry level composite range. It’s an affordable tool yet very reliable for tire shops,general maintenance on vehicles and light industrial maintenance.

CPT77491/2" Drive Composite Impact Wrench• 725 ft.-lbs torque• S2S Technology for forward / reverse• Ergonomic composite handle for strong durability and less weight

• 3 position regulator• Full teasing trigger allows full control when tightening or loosening fasteners

The most convenient side-to-side forward/reverse switch which we call S2S Technologyfor a true 1 hand operation. "Real Honest Torque" is 725 ft. lbs. It's designed forultimate user comfort and balanced with ergonomic, composite handle. Twin hammerclutch with MgDriven Technology for superior torque and reliability. The 360 degreeswivel inlet helps to prevent hose kinks.

CPT7780-61" Drive Lightweight Impact Wrench with 6" Extension• Extra Light: 17 Lbs. - less fatigue thanks to an aluminum housing• Powerful: 1700 ft.lbs of maximum torque in reverse• Useful: 4 positions power setting in both directions and on both sides of the tool• Versatile: Socket retainer ring combined with hole retainer• Precise Control: Double stage trigger, inside for safe operation in tight areas

Easy to reach forward and reverse lever and adjustable side handle with soft touch grip. Integrated protective cover on the twin hammer clutch housing makes this tool durable.

$788.91

$146.96

$233.44

$302.35

$99.14

$133.29

$1,157.84

$1,157.84

$80.15

$164.32

$184.36

14

MUST-HAVE ITEMS

CPT872Standard Duty Air Die Grinder• Adjustable power regulator for precise control• Lock off throttle to prevent accidental start up• Excellent for tire scuffing, cleaning tire moldings, general high speed polishing and grinding

• Rear exhaust directs air away from the work piece

Free speed: 22,000 RPM; Average air consumption: 6.5 cfm; Air inlet thread: 1/4"NPTF; Minimum hose size: 3/8"; Sound dBA: 101; Length: 5.75"; Weight: 1.25.

CPT8751/4" 90 Degree Angled Air Die Grinder• Compact, lightweight design for easymaneuverability

• 90 degree angle head allows flexibility in confined areas• Complete with 1/4" and 6mm collet• Excellent for high speed blending, smoothing, porting and deburring in confined areas

• Lock-off throttle to prevent accidental start up

Free speed: 22,500 rpm; Average air consumption: 5.5 cfm; Air inlet thread: 1/4"NPTF; Minimum hose size: 3/8"; Sound dBA: 101; Length: 4.88"; Weight: 1 lbs.

Air Tools

Nylon Ties

Nylon Cable Tie AssortmentsConvenient dispenser type package allows access to each compartment separately.Hundreds of uses, including electrical, auto, marine, home and garden. Available in blackor natural. Many sizes for a variety of applications. Professional quality. U.S.-made.

KTI76004 (Natural)KTI78004 (Black)

Each package includes: 4” (qty: 200), 7” (qty: 100) 11” (qty: 100)

Nylon Cable TiesHundreds of uses, including electrical, auto,marine, home and garden. Available in black ornatural. Many sizes for a variety of applications.Professional quality. Temperature rating: 185° F (85° C). U.S.-made.

KTI76000Nylon Tie Tightening Tool • Grips nylon cable ties and tightens with very secure grip• Also cuts excess with thumb lever

Bundle Tensile Part # Length Diameter Strength Color Quantity Price

KTI76040 4” 7/8” 18 lb. Natural 100

KTI78040 4” 7/8” 18 lb. Black 100

KTI76070 7” 1-7/8” 50 lb. Natural 100KTI78070 7” 1-7/8” 50 lb. Black 100

KTI77070 7” with mounting head 1-7/8” 50 lb. Natural 100KTI76110 11” 3-1⁄16” 50 lb. Natural 100KTI78110 11” 3-1⁄16” 50 lb. Black 100

KTI76140 14” 4” 50 lb. Natural 100KTI78140 14” 4” 50 lb. Black 100

KTI77140 14” with mounting head 4” 50 lb. Natural 100

KTI76145 14” heavy-duty 4-1⁄16” 120 lb. Natural 100KTI78145 14” heavy-duty 4-1⁄16” 120 lb. Black 100

KTI76180 18” heavy-duty 5¼” 120 lb. Natural 25

KTI78180 18” heavy-duty 5¼” 120 lb. Black 25

KTI76240 24” heavy-duty 7-3 ⁄16” 175 lb. Natural 25KTI78240 24” heavy-duty 7-3 ⁄16” 175 lb. Black 25KTI76360 36” heavy-duty 11” 175 lb. Natural 25KTI78360 36” heavy-duty 11” 175 lb. Black 25

Nylon Ties

$76.64

$73.83

$15.52

$18.88$20.61

$2.04$2.23$4.34$4.79$7.46$7.66$8.23$9.30$10.05$22.82$17.09$19.16$10.13$11.48$12.57$14.45$14.27$16.82

MUST-HAVE ITEMS

15

Hand Tools

KTI3820226 Piece 1/2" Drive 6 Point Metric Deep Impact Socket Set• Heat-treated, chrome-moly steel• Laser engraved for quick identification• Packaged in blow-molded case

26 piece metric impact socket set is manufactured from heat-treated chrome-molysteel for wear in professional, rugged environments. Set inclu des deep sockets sizedfrom 10mm to 36mm.

KTI341008 Piece 3/4" Drive 6 Point Standard Impact Socket Set• Manufactured from heat-treated chrome-moly steel for wear in professional, rugged environments

• Laser engraved for quick identification

Set includes sizes: 1" thru 1-1/2".

KTI3410112 Piece 3/4" Drive 6 Point Fractional Impact Socket Set• Chrome moly steel, heat treated• Readily handles larger applications, such as removal of truck wheels and lug nuts• Each piece is laser engraved for quick identification and individual purchase• Lifetime warranty

Set includes sizes: 1-9/16" to 2-3/8" .

KTI342008 Piece 3/4" Drive 6 Point Deep Impact Socket Set

KTI342018 Piece 3/4" Drive 6 Point Fractional Deep Impact Socket Set

KTI3910015 Piece 3/4" Drive Short Metric Impact Socket Set• Capable of handling larger applications• Manufactured from heat-treated chrome-moly steel

• All sockets are laser engraved for quick identification

• Packaged in a convenient blow-molded case• Lifetime warranty

KTI375006 Piece 3/8" Drive Metric 6 Point Flex Impact Socket Set• Manufactured from heat-treated chrome-moly steel for wear in professional, rugged environments

• Laser engraved for quick identification

Sizes include: 10mm thru 15mm

KTI3740010 Piece 3/8" Drive Metric Flex Impact Socket Set

KTI440033 Piece SAE Flare Nut Wrench Set• Ideal for gas, brake and air conditioninglines, flare nut wrenches provide morepower and torque where needed

• Tools manufactured with high-polished, heat-treated chrome vanadium

Set includes sizes: 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16".

KTI445003 Piece Metric Flare Nut Wrench Set

KTI7171524 oz. Hickory Series Brass Hammer• Hickory handle with solid brass head• Prevents damage to delicate parts• Non sparking• Made in the U.S.A.• 1-1/4" head diameter

KTI7178348 oz. Solid Brass Hammer• Non sparking prevents nicking delicate metals• Handle is solid brass• Head diameter: 1-1/4"• Made in the U.S.A.

KTI223008 Piece 3/8" Drive SAE Crowfoot Flare Nut Wrench Set • Used for air conditioning, fuel and hydraulic line fitting• Heat treated • Carded• Packaged on a socket rail

Includes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" and 7/8".

KTI2730010 Piece 3/8" Drive Metric Flare Nut Crowfoot Wrench Set Includes sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and 19mm.

KTI192404 Piece Bent End Pry Bar Set with Screwdriver Handles• Feature smooth, comfortable square handles• Packaged in plastic formed box

Set includes sizes: 9", 12", 18", 24".

$407.13

$148.20

$307.80

$256.80

$12.12

$12.63

$77.74

$144.75

$40.63

$78.21

$29.38

$35.51

$49.89

$222.30

$104.15

Visit us on the web: www.toolweb.com

This advertisement was prepared in advance, therefore merchandise availability is subject to delivery by manufacturersas scheduled. All advertised items are not stocked by all stores. Not responsible for typographical or pictorial errors.Quantities limited. CAUTION: Always wear appropriate safety equipment and observe safety advice and proper use of

equipment as instructed in warning and caution labels and operational instructions.

Pricing Good Through 4/30/15 Quantities Limited

MARCH / APRIL 2015

MLK745100Wrench Extender• Will work on almost any wrench• To loosen tight connections on hard to reach areas• Drop forged • Extra 1/2" square• 13-1/2" Length

DWSDMM350Pen Style Digital Multimeter• Contains all Multimeter tests needed in one compact size• Pen style shape allows for quick testing between points• Belt strap carry case included• CAT- III 600V safety rating• Easy to read backlit display for reading under the hood or the dash

TMROPK84982 Hose Clamp And Crimper Assortment - Hose Repair Solution• Quickly and easily installs factory style pinch style clamps• Rugged tool secures hose with simple one hand operation

Hose Repair with Just One Crimp

Closed Position Open Position Set To Crimp Crimp Finished

NEW

NEW

91 PIECES 8 DIFFERENT

CLAMPS!

Kit Includes:• HC8605 - 10 Pieces • HC8632 - 20 Pieces• HC8612 - 15 Pieces • HC8478 - 10 Pieces• HC8658 - 10 Pieces • HC8401 - 10 Pieces• HC8696 - 10 Pieces • HC8418 - 5 Pieces

Replacemant Parts:• HC8609 - Hand Held Pinch Clamp Crimper• HC8605 - 100 Pieces - 7/16" Open Pinch Clamp (.378" - 7/16")• HC8612 - 100 Pieces - 1/2" Open Pinch Clamp (.425" - 1/2")• HC8696 - 100 Pieces - 9/16" Open Pinch Clamp (.472" - 9/16")• HC8658 - 100 Pieces - 5/8" Open Pinch Clamp (.52" - 5/8")• HC8632 - 100 Pieces - 23/32" Open Pinch Clamp (.602" - 23/32")• HC8478 - 100 Pieces - 7/8" Open Pinch Clamp (.764" - 7/8")• HC8401 - 100 Pieces - 1" Open Pinch Clamp (.882" - 1")• HC8418 - 100 Pieces - 1 1/8" Open Pinch Clamp (1" - 1 1/8")

$61.36

$112.50

$107.14

ToolWEB Xtra March/April 2015 - Canada

Documents

Transcript of ToolWEB Xtra March/April 2015 - Canada