SHOP - ToolWEB

SHOP ❘ tools, equipmentS

HO

P T

OO

LS

902

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

FPW1444-0326135 Amp MIG/Flux Cored Welding System• Welds MIG and flux cored wire for maximum flexibility

between mild steel and stainless solid wires or flux cored wire• Welds up to 1/4” plate steel in a single pass• Operates from a standard 115V household outlet• Comes with a flowgauge regulator

Kit includes: Tweco Style MIG gun, welding wire, extra contact tips, return cable and clamps, input power cable and plug, operational set up chart and operating manual.

Multi-System Welding

WELDING

HSW6420-03200 AMP Multi-Weld 3-in-1 (MIG, STICK, TIG)• Professional multimig synergic inverter welder provides

200 amps of power for MIG, TIG and Stick applications on either a 115 or 230 volt line

• Input Power: 115-230VAC @ 20 Amps• Output Power: 200 Amps @ 35%• Features voltage, wire speed, amperage and full Synergic

scroll-down settings for steel, aluminum and silicone bronze, on LCD display

• Spool gun selection switch, euro-connect flange for torch & spool gun and lift-arc start foot pedal connector are standard

• Includes synergic inverter power supply, HSL15 torch 10’, 200A earth clamp 10’, HSM17 TIG torch 12.5’, 200A electrode holder 10’, foot pedal control 12.5’, gas regulator with hose, steel welding wire, AK-2 kit and operator manual

FPW1444-0872MST 220i 3-in-1 Welding System• MIG, STICK, and TIG (DC) welding processes• 3/8” Maximum plate thickness• Dual voltage machine 115V-208/230VAC• Uses 208/230VAC with maximum output 210 Amps• Spool gun capable aluminum MIG welding• 3-year warranty

TIT41185 90AMP Gasless Wire Feed Welder• Easy-to-use gasless flux-core wire welder• Portable and perfect for light duty repairs,

maintenance and fabrication on light gauge steel around home, workshop and garage

• Welds up to 1/8 in. thick mild steel - not suitable for aluminum• Operates on 120V single phase power• Amperage range: 60 - 90 amps• Uses 0.030” to 0.035” diameter flux-core wire

(sample spool included)• Thermal overload protector automatically

shuts off welder when duty cycle is exceeded


HO

P T

OO

LS

903

WELDING



FPW1444-0871MST 180i 3-in-1 MIG, STICK, and TIG Welding System• Maximum Output: 180 Amp. MIG: 180A/23V at

20% Duty Cycle. 145A/22.5V at 30% Duty Cycle• Stick: 175A/27V at 20% Duty Cycle. 140A/25.6V

at 30% Duty Cycle. TIG 175A/17V at 25%. 160A/16.4V at 30%.• MIG Voltage Range: 10-25V. Nominal OCV Volt DC: 62V.

Maximum Plate Thickness: 1/4”• Warranty: 3 Yr Limited. Primary Voltage: 208/230VAC. Supply

Voltage Range: 208-265VAC. Single Phase. Supply Frequency: 50/60Hz

• Supply Plug: NEMA 6-50P. Rated kVA: 9kVA at 180Amp. Lead Cord Length: 10 ft. Maximum Input Current: 37 Amp

• Lifetime warranty - repair only


FPW1444-0870MST 140i 3-In-1 MIG, STICK, and TIG Welding System• Maximum Output: 140 Amp. MIG: 140A/19V at 15% Duty

Cycle. 90A/18.5V at 20% Duty Cycle• Stick: 90A/23V at 15% Duty Cycle. 80A/23.2V at 20% Duty

Cycle. TIG 140A/15.6V at 15%. 100A/14V at 20%.• MIG Voltage Range: 14.5-19V. Nominal OCV Volt DC: 53V.

Maximum Plate Thickness: 3/16”• Warranty: 3 Yr Limited. Primary Voltage: 115VAC. Supply

Voltage Range: 95-140VAC. Single Phase. Supply Frequency: 50/60Hz

• Supply Plug: NEMA 5-20P. Rated kVA: 5kVA at 140 Amp. Lead Cord Length: 10’

• 3 year warranty on material and workmanship

HSW6550Synergic Pulse Multi-MIG Welder• Synergic Program Modes: Select synergic,

single-pulse synergic or double-pulse synergic• Synergic Inputs: Select material type, wire, size, shield gas

& material thickness: pull trigger to apply perfect weld• Triple-Drive MIG Selection: Three guns and wire feed drives

for silicone bronze, aluminum & steel MIG welding• Dual Cylinder Cart: Supports mixed and 100% shield gas

cylinders with dedicated lines and regulators• DC TIG and STICK Electrode Function

The HSM250 Double-Pulse Synergic Multi-purpose MIG/TIG/STICK welder is the choice of automotive repair professionals with unparalleled performance. This compact machine offers three MIG wire feed and torch drives with synergic, synergic single-pulse or synergic double-pulse programs for steel, aluminum and silicone bronze welding with wire sizes from .023”-.045”. The unit also features lift-arc DC TIG and electrode welding capability. With 250 amps of power, it is capable of welding all steel and aluminum alloys from #20GA to ½”. Additionally, it offers twin cylinder racks and dual gas inputs for mixed and 100% gases.


HO

P T

OO

LS

904

WELDING


MLL907693Miller Multimatic 215 Multiprocess Welder• Material thickness gauge #229895• 6.5 ft (2 m) power cord and MVP™ adapter

plugs for 120V and 240V• 10 ft (3 m) MDX™-100 MIG gun• 13 ft (4 m) cable electrode holder

and 25 mm Dinse-style connector• 10 ft (3 m) work cable with clamp

and 25 mm Dinse-style connector• Argon and AR/CO2 mix regulator/flow gauge with hose• Spool of Hobart® .030 in (0.8 mm) solid wire• Two contact tips for .030 in (0.8 mm) wire• Quick Select™ drive roll for .024 in (0.6 mm) or

.030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire

• Hook-and-loop cord wraps

MLL907757Miller Multimatic 220 AC/DC• 6.5 ft (2 m) power cord and MVP™

adapter plugs for 120V and 240V• 10 ft MDX™-100 MIG Welding Gun• 13 ft (4 m) cable electrode holder and

25 mm Dinse-style connector• 12.5 ft (3.8 m) Weldcraft™ A-150 (WP-17) TIG

torch with 25mm Dinse-style connector• RFCS-14 HD foot control with 20 ft (6 m) cord• 10 ft (3 m) work cable with clamp and 25 mm

Dinse-style connector• Two Argon and AR/CO2 mix regulator/flow

gauge with hoses• Spool of Hobart® .030 in (0.8 mm) solid wire• Two contact tips for .030 in (0.8 mm) wire• Quick Select™ drive roll for .024 in (0.6 mm) or

.030/.035 in (0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire

• AK2C TIG torch accessory kit• Material thickness gauge #229895• Hook-and-loop cord wraps


FPW0558102240Rebel EMP 215ic MIG/TIG/STICK Welder Package• ESAB® Rebel Welding Power Source, Tweco Fusion® 180 MIG

Gun with 10 ft (3 m) Cable, Spare MIG Gun parts kit, including bonus Contact Tips, and Drive Rolls for .023” (0.6 mm), .030” (0.8 mm) and

• Wire Diameter Range Mild Steel: .023” – .035” (0.6 – 0.9 mm)• Maximum Output 240 Amp MIG (GMAW/FCAW)• True multi-process performance for best-in-class MIG,Stick,TIG• Offers 120/230V flexibility


HO

P T

OO

LS

905

WELDING

MLL951601Millermatic 141 MIG Welder with Running Gear/Cylinder Rack• Hook-and-loop cord wraps• 6.5-ft. (2 m) power cord with plug• Small running gear/cylinder rack• 10-ft. (3 m) MDX™-100 MIG Welding Gun• 10-ft. (3 m) work cable with clamp• Argon and AR/CO2 mix flow gauge regulator with gas hose• Hobart® spool of .030-in. (0.8 mm) solid wire• Quick Select™ drive rolls for .024-in. (0.6 mm) or

.030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire

• Two contact tips for .030-in. (0.8 mm) wire• Material thickness gauge (#229 895)

MLL951715Millermatic 211 MIG Welder• Hook-and-loop cord wraps• 6.5’ (2 m) power cord and MVP™ adapter plugs

for 120V and 240V• 10’ MDX™-100 MIG gun • 10’ work cable and clamp• Argon and AR/CO2 mix regulator/flow gauge with hose• Spool of Hobart .030” (0.8 mm) solid wire• Two contact tips for .030 in (0.8 mm) wire• Quick Select drive roll for .024 in (0.6 mm) or .030/.035 in

(0.8/0.9 mm) solid wire, and .030/.035 (0.8/0.9 mm) flux cored wire• Material thickness gauge #229895

MLL951821Millermatic 255 Auto• Three Guns: One for steel, one for aluminum and one

for silicon bronze to optimize welding performance and minimize cross-contamination

• Easy weld start by just setting the wire and gas type, wire diameter (.023 in./6 mm to .047 in./1.2 mm), and material thickness to increase productivity

• Easy-to-understand interface ensures proper machine setup, reducing setup time and increasing weld time

HSW6220200 Amp MIG Welder• Heavy Duty professional portable

inverter MIG welder provides 200 amps of power• Features digital voltage, wire speed and amperage display,

adjustable wave control, spool gun selection switch and euro-connect flange for torch & spool gun

• Input Power: 230VAC @ 20 Amps• Output Power: 200 Amps @ 35%• Includes inverter power supply, HSL15 torch 10’,

200A earth clamp 10’, gas regulator with hose, steel welding wire and operator manual

MIG Welding


HO

P T

OO

LS

906

MIG Welding

WELDING

LEWK2185-1Lincoln Electric Handy Mig™ Welder• 35-88 amps output; welds up to 1/8 in. mild steel• Welds both MIG (shielding gas sold separately) and flux-cored• Plugs into household 115V, 20 amp outlet• Cold contactor safety feature keeps welding wire electrically

“cold” until gun trigger is pressed• Compact, portable, lightweight and easy to use. Great for

home repair and hobby projects on light gauge mild steel found around most households

LEWK2697-1Easy Mig® 140 120 Volt AC Input Compact Wire Welder• Forgiving arc makes dialing in your application easy• Smooth arc starts with minimal spatter• Wide 30-140 amp welding output range• Precision full adjustment drive system reduces

chance of wire tangling and crushing• Large industrial closed-design drive motor

for improved torque and trouble free performance

HSW6213130 AMP MIG Welder• Economical portable inverter MIG welder provides

130 amps of power for MIG and/or flux-cored wire welding on a 115-volt line

• Welder features wire speed and power settings by material and wire thickness

• Package includes inverter power supply, HSL15 torch 10’, 200A earth clamp 10’, gas regulator with hose, steel & flux-cored welding wire and operator manual

• 3 year warranty on material and workmanship

HSW6214140 AMP MIG Welder• Heavy Duty Professional portable inverter

MIG welder provides 140 amps of power• Welder features digital voltage, wire speed

and amperage display, adjustable wave control,• Package includes inverter power supply,

HSL15 torch 10’, 200A earth clamp• Input Power: 115VAC @ 20 Amps• Output Power: 140 Amps @ 35%


HO

P T

OO

LS

907

WELDING

TIG Welding Plasma Cutters

Spot Welding

LNXL4000Mark II Autobody Dual Spot Welder• Streamlined construction• Easy portability• Make factory type spot welds

in the shop• Simple to operate. Simply press

the two electrode guns against the work, press the button and the welder does the work. Two spot welds every time.

MLL907627Miller Diversion 180 TIG Welder• 115 / 230 Input Power• AC/DC Tig Welder• Light Weight• Easy to use and understand interface• 8 ft. (2.4 m) primary cord with MVP™ plugs for

120 V (219261) and 240 V (219258)

TITPLJRWPC45LT45 Amp Plasma Cutter• High performance and cutting capacity• Cutting Capability: as thin as 0.02” Sheet metal

up to as thick as 0.5” Steel• User friendly, lightweight and portable• Built-in handle on unit makes it simple to grab and go• Cutting edge inverter technology makes maintenance

and repair simple and cost effective• Can be used with portable power

FPW1445-192525i Plasma Cutter• MAX Cut Capacity - 3/8”• 115V (± 10%), Single Phase, 50/60Hz• Duty Cylce - 25A @ 25%• Easy to use 2.8” color LCD panel, with all adjustments

in just one knob• Two-year guarantee for the power source and three

months for the torch


HO

P T

OO

LS

908

HSW600440 AMP Plasma Cutter• Professional inverter plasma cutter provides 10-40 amps of

power to genuine cut ½” and sever cut to 1” on steel.• Features dual input voltage 115-230VAC, adjustable output

10-40 amps, air purge switch, adjustable air regulator/dryer with gauge

• Package includes inverter power supply, HSP40 plasma torch 12’, 200A earth clamp, 115-volt adapter plug, spare tips & electrodes and operator manual.

• Input Power: 115-230VAC @ 20 Amps | Output Power: 40 Amps @ 35%

HSW600660 AMP Plasma Cutter• Professional inverter plasma cutter provides 10-60 amps of

power to genuine cut 3/4” and sever cut to 1-1/4” on steel• Features 230VAC input, adjustable output 10-60 amps, air

purge switch, adjustable air regulator/dryer with gauge• Package includes inverter power supply, HSP60 plasma

torch 12’, 200A earth clamp, spare tips & electrodes and operator manual

• Input Power: 230VAC @ 50 Amps | Output Power: 60 Amps @ 95%

• Heavy Duty professional machine

WELDING

Plasma Cutters

FPW1445-194545i Plasma Cutter• MAX Cut Capacity - 3/8”• 208/230V (± 10%), Single Phase, 50/60Hz• 45A @ 35%• Easy to use 2.8” color LCD panel, with all adjustments



FPW1445-193535i Plasma Cutter• MAX Cut Capacity - 5/8”• 208/230V (± 10%), Single Phase, 50/60Hz• 35A @ 35%• Easy to use 2.8” color LCD panel, with all adjustments




HO

P T

OO

LS

909

WELDING

Plasma Cutters

FPW1-5130-1Victor Thermal Dynamics Cutmaster 52 Plasma Arc Cutting System• Cuts 1/2” with a maximum of 1-1/8” • The most powerful and lightest weight

1/2” (12mm) machine on the market today• The 60 Amp tip allows the system to drag cut up to 1/4”• Cuts through mild, stainless, or aluminum up to 1.125”• 4-Year warranty

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

KTI75502Plasma Cutter Dual Voltage 120V / 240V• Dual Input Voltage: 120V / 240V• Output Current: 15-40A Amp• Cutting torch PT40, ground cable, spare electrode,

nozzle, air flowmeter Duty Cycle: 35%@40A• LED indicators: Green - Power On, Yellow - Unit

Overheating, Red - Cutting in Process• Covered by a 2 Year Warranty

MLL907579Spectrum® 625 X-TREME 12-ft. XT40 Quick Connect• 120V/ 240V Input Power• Versitile Plasma Cutter• Light weight• X-Case with shoulder strap• XT40 hand-held torch with 12-ft. (3.7 m) cable• Torches include a complete set of 40 A consumables

TIT41200Titan® 30 Amp Plasma Cutter with Attached Torch• 30 AMP Plasma Cutter with Attached Torch• Lightweight and portable• Powerful and reliable IGBT inverter technology

delivers 30 Amp at a 35% duty cycle• Dual voltage-sensing technology (115V or 230V)

lets you plug into any common power supply with included adapter

• Cuts mild steel, stainless, brass, aluminum and other conductive materials


HO

P T

OO

LS

910

WELDING

Oxy-Acetylene

FPW0384-2571Firepower OxyFuel 250-510C Medium Duty Outfit• High Capacity: Cut 1/8” (3.2 mm) to 5” (127 mm) with optional

tips. Optimized to cut 1/2”, weld 5/64” out of the box• The Oxyfuel 250 Medium Duty Outfit contains premium per-

formance components for the value driven professional user. Optimized for 1/2” cut and 5/64 welding out of the box. Suitable for light to medium duty hand cutting, fusion welding, braze welding, and heating applications.

Includes: Oxygen/Acetylene 250 series regulators, 250 series cutting attachment and handle, dual R-grade hose 12.5’ long, #0 cutting tip, #0 welding nozzle, striker, protective eye-wear, and manual.

FPW0384-2684OxyFuel 350 Heavy Duty Outfit• High Capacity: Cut 1/8” (3.2 mm) to 6” (152 mm) with

optional tips. Optimized to cut 1”, weld 1/8” to 1/2”out of the box

Includes: 350 Series cutting attachment and handle, 350 Series Oxygen/Acetylene regulators, flashback arrestors, dual R-grade hose (12.5’ long), #1 cutting tip, #2 welding nozzle, striker, protective eyewear, and manual.



FPW0384-2572OxyFuel 250 Medium Duty Outfit• Flexible: Cutting Torch and Handle are ready for

multiple gas options; Oxy-Acetylene, Propane, Butane, Propane, Natural and LP Gases

• High Capacity: Cut 1/8” (3.2 mm) to 5” (127 mm). Heat using multiple heat nozzles. Weld up to 1/2” Steel

• Ease of Use: Simple to use high contrast gauges. Ergonomic color coded knobs (Acetylene & Oxygen)

• Rugged: Constructed with High Strength Allow, heavy duty stainless steel and durable brass

• Safety: Meets or exceeds industry safety standards


FPW0384-2682OxyFuel 350 Heavy Duty Outfit• Flexible: Cutting torch and handle are ready for

multiple gas options; Oxy-Acetylene, Propane, Butane, Natural and LP Gases

• High Capacity: Cut 1/8” (3.2 mm) to 6” (152 mm) with optional tips. Heat using multiple heat nozzles. Weld up to 1/2” Steel. Optimized to cut 1”, weld 1/8” out of the box

• Ease of Use: Simple to use high contrast gauges. Ergonomic color coded knobs (Acetylene & Oxygen)

• Rugged: Constructed with high strength alloy, heavy duty stainless steel, and durable brass

• Safety: Meets or exceeds industry safety standards



HO

P T

OO

LS

911

WELDING

Oxy-Acetylene

FPW0384-0977OxyFuel 250 Outfit with Tanks • Complete portable system• Simple to use rear mount regulator with high contrast gauges• Cuts 1/8” to 3” steel• Meets or exceeds industry safety standards• Suitable for light duty fusion welding, braze welding, brazing

and hand cutting applications• 2 year warranty on material and workmanship

Dual Line Welding Hose• Premium quality hose

produced to stringent specifications

• Meets or exceeds the requirement of RMA and CGA

• Grade “R” welding hose is reccommended for use with Acetylene Gas only

FPW1412-0020 - 3/16” x 25’FPW1412-0021 - 1/4” x 25’FPW1412-0022 - 1/4” x 50’




HO

P T

OO

LS

912


AST8202Universal Welding Cart• Made of heavy duty steel construction• Heavy duty wheels - two 7.5” fixed wheels

and two 3” swivel casters• 3 shelves for easy access to supplies• Cart size: 27-1/2”(L) x 16-1/3”(W) x 28”(H)• Top shelf size: 17-3/4”(L) x 11-1/2”(W);

bottom shelf size: 27-1/2”(L) x 11-1/2”(W)• 1 year warranty on material and workmanship

TIT41197Welding Cart• Designed to store and transport most MIG and plasma

machines, shielding gas tanks and other welding equipment and accessories

• Front mounted handle for easy maneuverability• Includes (2) Safety chains to secure shielding gas tanks• Front wheel swivel casters• Tilted top shelf allows easy access to welder controls

WELDING ACCESSORIES

MLL301239Heavy-Duty Welder Cart & Cylinder Rack• Gas cylinder rack is designed to hold one gas cylinder

no larger than 7 in (178 mm) diameter• Perfect for small Multimatic™, Millermatic® and

Handler® MIG welders and Diversion™ TIG welders• Easy to maneuver

KTI75503Professional Welding Cart• Professional cart with solid axle and

over-sized steel hub wheels for stability• Heavy gauge powder-coated steel

frame with cylinder supports• Over-sized ball bearing front casters for easy

movement around shop• Tilted top shelf for ease of machine settings• 2 lower shelves provide convenient storage for

helmet, gloves and tools



HO

P T

OO

LS

913

HSW7020225 AMP Spool Gun• Compact spool gun for

aluminum or steel welding• Rated to 220 amps• Heavy Duty Spool Gun• 20’ direct connect coaxial cable• Works with HSW-6214, 6220, 6420

WELDING ACCESSORIES

MTNWECGA58055CF Welding Gas Cylinder with CGA580-F Valve• Steel cylinder for CO2 /

Argon Gas with CGA580 female valve• Green 55CF volume UC15# cylinder with

1800 fill and 3000 max. PSI rating• Cast rotary knob shut-off valve

with female CGA580 outlet


MLL300497Spoolmate™ 200 MIG Spoolgun• Miller Spoolmate™ 200 MIG Spoolgun

is a highly reliable and economical spool gun with excellent feeding to weld aluminum

• Ideal For use with the Millermatic® 212 Auto-Set™.• Light Industrial spool gun rated at 160 amps at 60% duty cycle• Ideal for welding with .023 - .035 wires• Wire speed adjustment located on handle allows the user to

conveniently change wire speed directly from the spool gun• Hinged wire spool cover makes it easy to access wire

compartment

MLL300371Spoolmate™ 100 Series Aluminum Spool Gun• Spoolmate™ 100 Series spool guns

provide 12 ft (3.7 m) of cable reach and accessibility for smooth feeding of aluminum wire

• Recessed contact tip for easier welding and prevention of burn back issues

• Dual V-knurled drive rolls for consistent feeding• Adjustable pressure lever for easy loading and

unloading of wire• Clear spool cover allows the user to see the amount

of wire left before it runs out

SRK14525Blue Extra Heavy Duty Gloves• Kevlar™ lined glove is 15-1/2” long• The gun cut glove with wing thumb construction

CPSNITROKITGNitrogen Pressure Leak Test Kit with Regulator• Test manifold with 0-200 PSIG gauge• 6’ Red service hose with 1/4” SAE female• R134a Hi side snap coupler• 25’ coiled air hose assembly

with 1/4” MPT x 1/4” coupler

FPW1444-0894Firepower 160A Spool Gun with Euro-Kwik Connector• Interfaces with Firepower MST 180i and 220i 3-in-1 welders• Rated 20% Duty Cycle at 160 Amps. Uses 11-Series Tips and

Nozzles. For Aluminum Welding Applications• Contents: FP Spool Gun 160A, Custom Carrying Case, 12 ft.

Cable with euro-kwik connector, conductor tube, 2 - .023” 11 Series Contact Tips, 4 - .035” 11 Series Contact Tips, 2 - 1/2” 11 Series Nozzle, 2 Gas Diffusers

• For use with competitive welder which have a Euro-kwik connector

• Aluminum Wire Capacity: 0.023” - 0.035” Diameter, Stainless Steel Wire Capacity: 0.023” - 0.030” Diameter

914


HO

P T

OO

LS

WELDING ACCESSORIES

KTI7045050” x 80” Safety Welding Blanket• Extreme protection• A high-tech carbon fiber welding

blanket made with the Pavenex® fabric• Lightweight, soft, and flexible• Provides protection against direct contact

with flame, sparks, and weld spatter• Will withstand temperature up to 2200°F without shrinking

KTI7044010” x 18” Pyro Torch Shield• Carbon fiber flame blocking fabric

for the professional or do-it-yourselfer• Protect surfaces from sparks or open flame from gas torches

with this patented Pavenex® carbon fiber shield• Withstands even the extreme heat of acetylene torches






FPW1423-0016Standard Tip Cleaners• Set of 13 Cleaners with File• Sizes #6 to #26

FPW1423-0026Round file Spark Lighter• Single Flint Spark Lighter• Zinc Body• Tested to 300,000 Strikes

FPW1423-00503- Flint Spark Lighter• Triple Flint Spark Lighter• Zinc Body• Tested to 300,000 Strikes

LNX088206’ x 8’ Welding Blanket• Finished edge • Grommets every 12”• 30 oz. material• 1000º F heat rating• Highly pliable

TIT41217Titan® Anti-Scratch Anti-Fog Welding Goggles• Anti scratch anti fog welding goggles• Equipped with IRS lenses that are designed to prevent

scratching and fog build up• Perfect for light to medium soldering, brazing, cutting

or welding• Designed for gas welding and plasma cutting• Flexible 180 degree viewing angle

SH

OP

TO

OLS

915

SHOP ❘ tools, equipment

WELDING ACCESSORIES


Part Number Wire Type Wire Diameter

Spool Size

FPW1440-0211 Mild Steel ER70S-6 .023" 11 lbs.




FPW1440-0230 Flux-Cored E71T-GS .030" 2 lbs.



Welding Wire

Arc Welding Electrodes - Type 6011• Premium AWS Class E-6011 • Mild steel type• Deep penetration, welds through rust, scale, oil and dirt• Use when you are unable to prepare the welding surface• AC or DC, reverse polarity • 60,000 PSI tensile strength• All position electrode

FPW1440-0108 - 1/8”, 50 lb. boxFPW1440-0098 - 5/32”, 50 lb. box


STC23240Mig LED Light• LED light attachment for a MIG Torch which is easily adjusted

for accurate illumination of the area to be welded • A large diameter, easy to push “on/off” button can be

actuated with your welding gloves on • Flexible mounting bracket attaches to the neck of standard

(1/2” to 3/4”) MIG welding torches • The MIG Light assists whether you are using a traditional or

Auto-darkening helmet


FPW1440-0134E-6013 1/8” Arc Welding Electrodes 1 lb.• Premium AWS Class E-6013• Mild steel type• Designed for general purpose• Excellent for low heat applications• Best used with clean or prepared welding surface

FPW1442-0020Tig Torch For 140I• 50 mm Dinse Connector with 25mm Dinse Adaptor• 12? Lead Length• Valve Knob for Shielding Gas• On/Off Switch• Includes Set of Accessories: 2 Collets, 2 Collet Bodies,

2 Cup Aluminas, 2 Tungsten Electrodes, and a Short and Long Back Cap


HO

P T

OO

LS

916

ANGGR91207Grip-On 7” Axial Grip “L” Plier (Epoxy)• Clamps two lap joints• Slim profile allows access into difficult places• Straight line motion of mobile jaw allows offset clamping• One-handed push button release system• Eco-friendly epoxy coated handles are ten times more

corrosion resistant and repels welding spatter• Aluminum repair tool• Problem solving tool for the professional auto body technician,

steel fabricator, sheet metal worker etc. Important time savings in assembly and repair work

MALWPAK6 Piece Weld-Bonding Pilers Set• Clamp Metal Profiles for Easy Welding• Eliminates provisional welding• Axial motions allows offset clamping• Fast and easy one-hand operation• Forged steel construction and durable finishes

Set includes: MALWPAW, MALWPAJ, MALWPAT, MALPAJJ, MALWPAL and MALWPALL

TIT41225Welder’s Chipping Hammer• Use to chip and remove slag from welds• Cone-shaped nose with sharp point• Coiled spring handle

VIMMPWT2LMagnetic Plug Weld Tool 2.5” Long• Weld backup tools• Strong magnetic base• Electric weld will not stick to the copper pads• For use with TIG and MIG electronic welders• Keeps wire from going through hole• Saves time and labor by providing quicker, cleaner welds

TOOLS

®

TIT41227Small Stainless Steel Wire Brush• Ideal for cleaning aluminum welds• Clean tools, small engine parts, Copper and aluminum tubing,

grills or any other hard surface

WELDING ACCESSORIES


HO

P T

OO

LS

917

WELDING ACCESSORIES

WELDING HELMETS



KTI70046Auto Darkening Welding Goggles Kit • Adjustable shade 5-13 for grinding to TIG welding• Time and sensitivity fully adjustable• Hood includes bump cap for safety• Lightweight and ideal for working in confined spaces• 1 year warranty on material and workmanshipIncludes: fire retardant hood and bump cap, auto darkening welding goggles, protective shield and carrying bag

MMM372393M™ Speedglas™ Trojan Warrior Welding Helmet 100 with Auto-Darkening Filter• Auto-Darkening Filter 100V, which

features five user-selectable dark shades, from shade 8 to shade 12

• Standards Compliance: ANSI Z87.1-2003, CSA Z94.3• Delay (switching time dark-light): 100-250 millisecond• Viewing area: 1.73 x 3.66 inches (44 x 93 millimeter)• Battery life: 1,500 hours

KTI70047Auto Darkening Welding Helmet - Patriotic Design• Extra large viewing area:

3.94” x 3.66” (100 x 93mm)• Shade control: DIN 5-9 / 9-13• Optical rating: 1/1/1/2• Four sensors with fast switching time:

1/10,000 seconds from clear to dark state• Solar Powered • Sensitivity and delay control• Suitable for all welding process and plasma cutting• Grind: protection against high-speed particles (EN 175 B)• Weighs: 1.09 lbs.• Covered by a 2 Year Warranty

FPW0387-0465Self Igniting Torch• SMP-41 MAPP and propane torch,

pull the trigger to light the torch• Swirl combustion tip provides

maximum heat and reduces brazing time by 30%• Safety trigger lock holds flame

for extended periods and prevents accidental lighting gas gets hot enough to braze mild steel

FPW0387-0463Self Lighting Mapp® and Propane Torch• Auto igniter for instant flame• Safety trigger lock holds flame for extended

periods and prevents accidental lighting• 180° swivel tip for easy positioning• Stainless steel burn tube with replaceable

brass tip and orifice• Ergonomic handle made of high impact

plastic for durability and designed for comfortable grip

• Fits any standard propane or MAPP cylinder, CGA 600




HO

P T

OO

LS

918

SPC3011230EFP Helmet Gen Y Series Murda Out• 1st and ONLY Welding Helmet

in the world that offers you an Adjustable 4/9-13 ADF (Auto Darkening) integrated into a 180° Lens design giving you ear to ear vision when welding

• Headgear adjustments allow you to move the helmet closer or further away from your face

• ADF delay adjustments & high quality ADF


WELDING HELMETS

40VizI4 Series Welding Helmets• 1st and ONLY Welding Helmet in the world

that offers you an adjustable 4 sensor 4/9-13 ADF (Auto Darkening) integrated into a 180° lens design giving you ear to ear vision when welding

• ADF features: internal adjustments, 4 sensor, fully automatic, grind mode, sensitivity, delay controls, grind flash indicator, low battery warning

• New articulating multi point adjustable halo headgear

SPC3011629 - Dead KingSPC3011674 - KannibalSPC3011704 - Warpig GraphicsSPC3011698 - Captain Jack GraphicsSPC3011681 - M03 Graphics

SPC3011681

SPC3011629


EFP Helmet Elementary Series• World’s 1st and ONLY Grinding Mask that can be

converted into a Welding Helmet. Only grinding/splash guard helmet with 180º viewing area

• Face forming profile that lets you get into tight spaces• Round profile lets hot air escape easier making it 6º cooler

than other helmets• Can interchange lenses to make it a welding helmet• World’s lightest helmet• Headgear adjustments allows you to move the helmet closer

or further away from your face• Made from high heat, high impact nylon• ANSI, CE, AUS/NZ and CSA approved

SPC3010745 - Lunar Storm GraphicsSPC3010738 - Metal Hed Graphics

SPC3010745

SPC3010738


SPC3011674

SPC3011704

SPC3011698

WELDING HELMETS

Wide Lens Solar Powered Welding Helmets • Ultra high performance filters protects against UV & IR• Large viewable area: 3.86” wide x 2.17” high• Utilizes high performance solar cells with built-in

lithium batteries as back-up

The Titan Solar Powered (With 2- built-in 3 volt lithium back-up batteries) Auto Darkening Welding Helmet is designed to protect the eyes. Great for use with MIG/MAG - TIG and ARC welding UV/IR protection at all times. Auto-darkening filter au-tomatically changes from light to dark in 1/30,000 of a second and dark to light: 0.25-.08 sec. The helmet also allows for a level of outside sensitivity adjustment from low to high and the viewing area is: 3.85 x 2.17.

TIT41265 - Eagle GraphicsTIT41266 - Flame GraphicsTIT41267 - Red and SilverTIT45000 - Motorcycle Pin-Up Girl TIT45005 - Under-the-hood Pin-Up Girl

SPC3011322EFP Helmet Gen Y Series Gate Keeper• 1st and ONLY Welding Helmet in the

world that offers you an adjustable 4/9-13 ADF (Auto Darkening) integrated into a 180° Lens design giving you ear to ear vision when welding

• Has external grind mode and shade adjustments

• World’s lightest helmet• Headgear adjustments allows you

to move the helmet closer or further away from your face• Meets or exceeds ANSI, CE, AUS/NZ and CSA standards


EFP Helmet Gen X Welding Helmets• World’s lightest helmet • Killer graphics• 1st and ONLY Welding Helmet in the world that offers a Fixed

Shade 3/10 ADF (Auto Darkening Filter) integrated into a 180° lens design giving you ear to ear vision when welding

• Face forming profile that lets you get into tight spaces• Round profile lets hot air escape easier, making it 6° cooler

than other helmets• 9 Point high quality adjustable halo headgear

with replaceable sweat absorbent headband• Made from high heat & high impact nylon• ANSI, CE, AUS/NZ and CSA Approved• Comes fully assembled

SPC3010059 - Black Asp GraphicsSPC3010288 - Chameleon GraphicsSPC3010066 - DOA Graphics

SPC3010066

SPC3010288

SPC3010059



HO

P T

OO

LS

919

TIT41265

TIT41266

TIT41267

TIT45000

TIT45005


HO

P T

OO

LS

920

TIT41264Clear Protective Replacement Lens• 2.125” x 4” viewing area• Helmets TIT41265, TIT41266, TIT41267,

TIT41278, TIT41279, TIT41288 & TIT41290

Auto Darkening Solar Powered Welding Helmets• Durable, lightweight material

is corrosion resistant and flame retardant

• Ultra high performance filters protect against UV and IR

• 2.125 x 4” viewing area• Variable shades from

DIN 9 to DIN 13

TIT41279 - Skull Graphics TIT41290 - Gear Head GraphicsTIT41288 - Pinup Girl GraphicsTIT41282 - Skull and Pistols

WELDING HELMETS

MLL282002Digital Performance ‘64 Custom Relic Welding Helmet• Miller® ‘64 Custom™ Digital Performance™

auto darkening welding helmet now features ClearLight• Provides a bright, crisp, clear view of the weld puddle with

more realistic color hues in both light and dark states• The Digital Performance™ Clearlight™ lens operates in weld,

cut and grind modes and is DC TIG rated down to 5 amps• Comes complete with Miller’s redesigned headgear, easier to

use digital controls and True Blue® three year lens warranty

MLL281007Digital Elite Raptor Welding Helmet• Auto darkening welding helmet

with ClearLight™• Digital Elite™ lens has four arc sensors

and operates in weld, cut, grind and Miller’s X-Mode™• Comes complete with Miller’s redesigned headgear,

easier to use digital controls and three year True Blue® lens warranty

MLL281004Digital Elite Vintage Roadster Helmet• Auto darkening welding helmet

with ClearLight™ lens technology• Digital Elite™ lens has four arc sensors

and operates in weld, cut, grind and Miller’s X-Mode™• Comes complete with Miller’s redesigned headgear, easier to

use digital controls and three year True Blue® lens warranty• Eliminates sunlight interference and low-amp lens flashing from

obstructed arc sensors

MLL280051Digital Infinity Relic Welding Helmet• Industry’s largest viewing area maximizes visibility –

featuring ClearLight Lens Technology• High-definition optics for precision arc recognition• 13.4 sq. in. Viewing Area• Weld, Cut, Grind, and X-Mode provide ultimate versatility• Oversized comfort cushion provides extensive adjustability,

settings, and enhanced support


HO

P T

OO

LS

921

WELDING HELMETS

FPW1423-4100Hand Held Welding Shield 2” x 4-1/4”• Streamlined, compact design allows

welders to get into tight places• Meets or exceeds: ANSI Z87-1,

CE and various International Standards

Auto-Darkening Welding Helmet• Enhanced Performance: Four arc sensors

and variable shade from 9-13• Grinding mode: Shade level 4• Adjustable Controls: “Delay” selection switch

and sensitivity control, low to high• Solar-Powered: No worries about changing the batteries• Unique custom designs: exceptionally priced

at an outstanding value

FPW1441-0086 - Plug and PistonFPW1441-0085 - Pinstripe DesignFPW1441-0087 - Stars & StripesFPW1441-0088 - Fire and Skull

FPW0700000800Welding Helmet ESAB Sentinel A50• Revolutionary shell design -

high impact resistance nylon• Halo headgear - ergonomic,

infinitely-adjustable 5 point head gear provides extreme comfort and balance

• Low-profile design, central pivot point allows for maximum head clearance while helmet is in the up position

• 3.93 x 2.36 in. (100 x 60 mm) viewing area. 1/1/1/2 –5-13 ADF• Color touch screen control panel with 8 separate memory set-

tings and externally activated shade 4 Grind Button• 3 year warranty on material and workmanship


TIT41262Solar Powered Auto Darkening Wide Lens Welding Helmet• Protects against UV and infrared

radiation in variable shades from DIN 9 to DIN 13

• Large 3.85”” x 1.70”” viewing area

FPW1423-0018Soft Frame, Lift Front Welders Goggles 2” x 4-1/4”• Filter lens frame raises easily for on-the-job versatility• Furnished with filter lens (Shade No. 5) • Meets/Exceeds ANSI Z87.1 and various International Standards

TIT41260Solar Powered Auto Darkening Welding Helmet• Protects against UV and infrared

radiation in variable shades from DIN 9 to DIN 13• Lens automatically darkens when an arc is struck and

returns to normal when welding stops• Powered by solar cells with

battery back-up


HO

P T

OO

LS

922

HEATING, WELDING, SOLDERING

MASUT100SIKSelf Igniting Ultratorch® Soldering/Heat Tool Kit• Lighter in weight than competitive models, making it easy

to hold and use over extended periods of time• Built-in fuel filter for consistent fuel ignition• Adjustable temperature up to 1200° FKit includes: unit, soldering tip, heat tip, shrink attachment, spanner and open end wrench, sponge and stand packed in a metal storage carrying case. Use to pinpoint heat, remove surface mount components, repair vinyl, shrink heat shrink tubing, solder and desolder, spot dry, and more.

MASUT100SISelf Igniting Ultratorch® Soldering/Heat Tool (Tool Only)

MASEI20K4 in 1 Heat Tool Kit• Kit contains EI-20 iron, plastic cap with built in flint lighter,

1mm diameter needle tip, heat tip, torch tip, hot knife tip, a coil of 60/40 solder, sponge, and tool rest all packed in a rugged plastic case

• Completely portable, lightweight and easy to handle, does not require cords, batteries or cartridges

• Adjustable temperature control quickly regulates power to the tip, equivalent to a 10 to 60 watt electric soldering iron

• Built-in window indicates fuel level• Refill with Master Ultrane Butane for best performance• Meets U.S. consumer products safety commissions new child

safety requirements• Kit includes: 7 soldering tips, 1 heat tip, 1 torch tip, 2 hot knife

tips and 4 specialty tips available as optional accessories.

PPRPPSKButane Soldering Kit • Features an electronic ignition and flame

adjustment from 1/2” to 2-1/2”• Easily refillable with butane and will last up to 2 hours• Maximum temperature: 2500 F (when used as a torch)• Maximum temperature: 950 F (when used as a soldering tool)

Kit includes soldering tool, 3 soldering tips, 1 injection tip, 1 hot knife, 1 heat shield and 1 tube of solder.




®

WELD650PK300/200 Watts 120V Industrial Soldering Gun Kit• Professional heavy duty dual-heat wattage gun• Pistol grip design, ready to use in 6 seconds• Fingertip trigger, selects high (1st trigger position) or

low output (2nd trigger position)• Heavy gauge, high efficiency, tin-plated copper tip• Twin lights illuminate work


HO

P T

OO

LS

923


MASUT200SiJumbo Self Igniting Ultratorch• Built in fuel filter for consistent fuel ignition• Adjustable temperatures up to 1004° F• Built-in window indicates fuel level

Includes solder tip, heat tip, shrink attachment and protective cap. Use to pinpoint heat, shrink heat shrink tubing, solder and desolder, strip insulation, terminate specialty connectors

PTLSP-1KSelf Igniting Soldering Iron and Heat Tool Kit • 25 - 125 Watts; To 2,372°F/1,300°C - Professional, powerful,

soldering tool; number 1 choice for professionals for automotive and electronics

• 10 second refill time - no cords, no leads, no batteries to charge; simply fill with standard butane and use

• 40 second heat up time; 90 minute run time - ready to use almost instantly, anywhere; the leading professional butane powered soldering iron

• Interchangeable tips - in seconds convert to a powerful blow-torch, flameless hot air blower or hot knife; total flexibility

• Self Igniting - no flints, no matches, no lighters. Features self ignition push button for ease of use

Kit contents include: Soldering iron fitted with hot air and a deflector tip, knife tip, wire stand, cleaning sponge and tray, storage case and instructions

PTLPP-1KCordless Self Igniting Soldering and Heat Tool Kit • 15 - 75 Watts; To 2,372° F/1,300° C - compact, Powerful

precision soldering tool converts to a blow torch, hot knife and hot air blower

• 10 second refill time - no cords, No leads, no batteries to charge, simply fill with standard butane and use.

• 40 second heat up; 45 minute run time - ready to use almost instantly; pocket-sized powerhouse

Kit includes: Soldering iron, 2.4 mm tip, hot and deflector tip, blow torch tip, knife tip, wire stand, cleaning sponge and tray, storage case and instructions

KTI70059Multi-Function Solder Kit• Four function kit with auto-ignition tool

for the professional user• Ready to use 15 seconds after ignition• Equivalent to a power range 25-80 watt

Includes: Butane Torch, Solder Dispenser, 1mm Conical, Deflector, Heat Blower, 2mm Angle, 2.4mm Chisel, Hot Knife, Sponge all packaged in a storage case.



FPW1423-1114Solder Rosin Flux Core, 40/60, 1/8” x 1/4 lb.• Used for electrical applications• Non-corrosive • Electrically non-conductive


HO

P T

OO

LS

924


URE5003R330’ ABS White Rod• ABS is used in many interior

plastic as well as motorcycle fairings• It is fairly hard, has a very distinctive smell when melted,

smears and gets “hairy” when sanded at high speed• Easy to weld using either Urethane Supply Company’s airless

plastic welder or when using a hot air plastic welder• 30’ of plastic welding rod• Each rod is 1’ long and 1/8” in diameter

URE5003R1030’ FiberFlex Flat Sticks• Formulated with carbon and glass fibers for the strongest,

fastest repairs; in many cases eliminating the need for wire mesh re-enforcement

• Sticks to any kind of plastic, but works especially well on TPO’s• Cool it off and sand immediately to a fine feather edge• For use with Urethane Supply Company’s

Airless Plastic Welder• Each stick is 1’ long, approximately 1/8” thick

by approximately 1/2” wide

URE5700HTMini-Weld Model 7 Airless Plastic Welder Kit• The Mini-Weld Model 7 Airless Plastic Welder is a

complete kit that you can use to repair all kinds of plastic• It’s a complete, ready-to-use kit that is jam

packed with benefits• Things like an easy-to-understand instructional

video lets you learn how to weld in no time• Includes two different, easy-to-swap welder tips

for applying all of the included welding rod• A temperature control that allows you to dial in the

perfect temperature for welding whatever type of plastic you are working on

MASPH-1400WKPlastic Welding Kit• Temperature range 130 to 1000° F• Dial-in the perfect temperature and airflow

for the best control of your weld• Balanced ergonomic design prevents operator fatigue• Take off the welding tip and you have a great electronic

heat gun for other applications• Assembled in the USA., C-UL-US Listed

Equipped with our Proheat® LCD Dial-in heat gun, it is loaded with many benefits. Includes the following: Packages of ABS Welding Rod, PP Welding Rod, PVC Welding Rod, LDPE Welding Rod, and HDPE Welding Rod.Tips included: Speed Welding, Slit Nozzle, 3/8” Reducer, 5/8” Reducer, and 1 1/4” Shrink Attachment. Includeds heavy duty storage case.

PTLPP75Plastic Welding Kit • Cordless - self igniting plastic

welder - no special training needed• Welding can be carried out next to heat

sensitive components e.g. Cables, foams, textiles• Thin plastic parts can be welded, no uncontrolled heat transfer

which means less wrinkles in the parts to be welded• Problematic plastics that absorb water are easier to

weld e.g. ABS, PC and PA plastics• Reinforcement grid for extra strength or

where a hole needs to be filled

Kit includes: Plastic Welder, PE welding rods, PS welding rods, PP welding rods, ABS welding rods, Reinforcment grid, Brass brush, Cleaning Piston and Instruction leaflet.




HO

P T

OO

LS

925


KTI70054Mini Butane Torch• Mini butane torch with solder head• Piezo-electric ignition with

locking safety mechanism • Anti-flare• Temperature and flame control,

up to 2372° F jet flame• Removable safety stand• 1-Year Warranty

URE5003R230’ Polypropylene Black Rod• Polypropylene is used in many of the bumpers on import cars• Use this plastic welding rod with either Urethane Supply

Company’s airless plastic welder or a hot air plastic welder• Black color has been added to make more “invisible” repairs

to bumpers and other black polypropylene• 30 ft. of polypropylene plastic welding rods• Each rod measures 12” long and is 1/8th” in diameter

KTI70056Self Igniting Butane Torch Head• Portable and lightweight• Easy on/off valve• High energy flame• Angled swivel tube to reach difficult areas• For use with MAPP or propane gas

KTI70057Self Igniting Propane Torch Head • Self igniting propane torch head with

piezo igniter for instant flame• Ignition button lock for continuous use• Safety lock feature to prevent

accidental ignition• Replacement brass tip

KTI70052Hand Held Butane Torch Lighter• Handy pocket butane torch• Light duty soldering such as: shrinking heat

seal tubing, craft projects, thawing frozen locks, lighting camp stoves

PPRMTMicro Torch• Adjustable flame 1/2” to 2-1/2”• Electronic ignition• Easy refill butane• One refill lasts up to 2 hours• Flame temp up to 2500° F

KTI70048Micro Butane Turbo-Lite• CPSC (Consumer Product Safety Commission) compliant

mulit-purpose micro-torch/lighter• Piezo electronic ignition system • Stylish see through fuel tank• Protective flip-open cap • Reliable windproof lighter• Covered by a 1-year warrranty• Flame temperature: 2,400° F (1,300° C)

KTI70058Hand-Held Pro Butane Torch• The original hand-held,

lightweight and sturdy professional torch• Piezo ignition and safety kill/off switch• Adjustable air flow and gas flow control valves• Fuel for 190 minutes of operation at mid setting• Alloy die casting housing covered with

a protective grip and sturdy removable base for added safety

• Covered by a 1-year warranty• Flame temperature: 2,400° F (1,300° C)






PPRMTKIT01Power Probe TEK Micro Torch Kit• Excellent for soldering, brazing, soldering• Maximum temperature: 2500 F (torch mode)• Maximum temperature of 950 F (soldering mode)• 120 watt 580 BTU• Accessories Tips, Attachments and Removable

Base Stand Included


HO

P T

OO

LS

926

SOIMJ300Micro-Jet Auto Ignite Torch• Butane torch • Palm sized• Automatic windproof ignition• Child resistant

SOIPT220Butane Torch Hand Held with Electronic Ignition• 1300°C/2500°F • Automatic piezo ignition• Complete portability• Separate controls for fuel and air• Unparalled safety features• 4 hours burn time per fill• Removable safety stand included

CPSBRHT1Self Igniting Aluminum Hand Torch• Aluminum body • Trigger lock• Flame on hold button• Piston design to run in any position• Works with MAPP, PROPANE,

and PROPALINE




MASMT51Table Top Microtorch®• Wide stable base• Temperatures up to 2,500º F/1300º C• Built-in self igniting switch• Meets CPSC child safety requirements• Large built-in fuel tank is easy to refill• Runs approximately 2 hours - full charge• Unit is shipped without fuel - use with Master

Ultrane® butane for best performance

MASMT70Master Microtorch® MT-70• Gas adjustment wheel provides

adjustable, long blue torch flame up to 2,500°F/1,300°C

• Self-igniting piezo electric ignition is easy to start and eliminates the need for lighter or matches

MASMT11Microtorch with Safety• Compact palm size is perfect for

tool kits and field service kits• Produces an adjustable, wind resistant

flame with temperatures up to 2500ºF/1300ºC

• Built-in safety lock with improved easy to use self-ignition system

• Meets Consumer Products Safety Commission (CPSC) child safety requirements

• Powered by refillable “fuel cell” (included) with flame adjustment lever

MASMT76ADS Flame Micro Torch• Gas adjustment wheel provides

adjustable long blue torch flame with up to 2,500ºF (1,300ºC)

• Incorporates trigger switch with pulldown lock to meet (CPSC) requirements

• Incorporates a hands free slide lock for continuous use and instant off operation

• Unique shutter lever extinguishes ignition flame before using soldering or heat tip prevent overheating

• Removable base for table top or hand held use• Includes soldering iron and heat tip for soldering up to 752º

F/400º C and heating up to 932º F/500º C

MASMT76KSelf Igniting Torch Kit• MT76 torch • Removable stand• 5” wire cutter • Solder • 5” needle nose pliers• Foam cutter, hot knife tip, solder tip, heat tip and shrink tip



HO

P T

OO

LS

927


HEAT SHRINK KITS

WELML200Magna-Lite Table Top Butane Torch• Piezo Electronic Ignition System for

reliable ignition every time• Adjustable flame height• Up to 60 minutes continuous use controls flame

temperature up to 2,400º F• Child Safety Lock meets CPSC guidelines• Refillable with Weller WB1 or WB2 filtered butane

WELML100Magna-Lite Butane Micro Torch• Adjustable flame height• Electronic Ignition System • Key ring lanyard• Blue LED light illuminates work in dark conditions• Nozzle cover prevents accidental ignition• Used for heat shrinking tubing, fusing rope ends,

frozen locks, camping, labs and boating

®



KTI07740235 Piece Heat Shrink Tube Assortment• 8 different sizes in five colors• 3/32” to 3/4”

KTI0003585 Piece Shrink Tube Kit• Multi-compartment plastic

storage case• Includes wide range of product• Contains product assortment map• Includes most popular sizesKit includes sizes: 1/8”, 3/16”, 1/4”, 3/8” and 1/2”.


PTLHP820High Powered 820 Watt Gas Torch• Compact, lightweight (7 oz.) high power

with a massive 2798 BTU per hour burn rate• Powerful adjustable blue flame (over 4”)

for heavy-duty industrial applications• Guaranteed self-ignition with a sure-fire piezo,

twin-spark electrode system - lights first time every time• Robust, stainless steel front-end construction with specially

designed extra-strong internal components - spare jets available also for field repair and longer life

• One-year replacement warranty

BZMTS8000BTBernzOMatic® Max Heat Torch for Faster Work Times• Instant on/off ignition• Flame Type: Ultra-Swirl• Adjustable flame• Continuous flame lock• Durable cast body construction

A fully adjustable flame, and the compatibility of MAP-Pro® and propane fuels, the project possibilities are endless. With a continuous flame lock and pressure regulator, this torch is ideal for a multitude of projects such as brazing, metalworking, large diameter soldering, woodworking, and cooking.

BZMTS4000TBernzOMatic® Trigger Start Torch Head, Repl Brass Tip, Lock Button (Propane or Mapp Gas)• Torch Head, Trigger Start, with Replaceable Brass Tip, Lock

Button, for Propane or Mapp Gas• Torch Head, Trigger Start, with Replaceable Brass Tip, Lock

Button, for Propane or Mapp GasThis product meets the oversized requirement per UPS/FedEx.

• The shipping weight reflected is the dimensional weight. This product also meets the large package requirement per UPS/FedEx. The estimated shipping cost will include this fee.


HO

P T

OO

LS

928

MASVT-751DVaritemp Heat Gun 120V, 100 to 1200F,14.5A, 27 CFM• Upgraded long-life universal

motor delivers 2X PLUS run life, High 27 CFM airflow gets tough jobs done faster

• New quick-change plug-in heating element with even airflow over element for maximum heating efficiency

• Optimized design for improved serviceability• Redesigned ergonomic soft grip handle maximizes

user comfort• Sturdy die cast aluminum housing

HEAT GUNS

MTN7100General Use Heat Gun• The UltraHEAT™ heat gun features

a specifically designed heating element tested at over twice the useful life of competitive models and an impact resistant housing to ensure durability

• Lightweight and easy to use, UltraHEAT™ offers quick heat-up and ultra quiet operation

• 1 year warranty on material and workmanship.

Specifications: Temperature settings: 600ºF and 900ºF; Output: powerful 1,300 watts; Voltage: 120v / 60hz; Certifications: UL and C-UL listed; Fully double insulated for safety

MASHG-501DMaster Heat Gun 120V, 1200F, 14.5A, 27 CFM• Upgraded long-life universal motor

delivers 2X PLUS run life, High 27 CFM airflow gets tough jobs done faster

• New quick-change plug-in heating element with even airflow over element for maximum heating efficiency

• Optimized design for improved serviceability• Redesigned ergonomic soft grip handle maximizes

user comfort• Sturdy die cast aluminum housing





AST9426Industrial Heavy Duty Heat Gun• Variable temperature adjustment

provides a maximum temperature of 1000-1100°F• Powerful blower provides a high volume of air

needed for industrial applications; Moves 6 SCFM• Cool air setting for cooling tool and

for no-heat applications that adds versatility

Specifications: Voltage: 120V, 60Hz; Amperage: 13A; Weight: 4.68lbs; Temperature: 1000-1100°F; Air Volume: 6 SCFM; Wattage: 1600W

TIT22400Heat Gun• 120 volts• Dual temperature settings• 3 position rocker switch• Double Insulated• 6-1/2’ cord• Lifetime warranty - does not cover abuse

AST9425Dual Temperature Heat Gun Kit• Unit has a switch which

allows for two different heat settings

• Double insulation for extra safety

• Blow molded case for easy storage and transport

• Meets IEC standards and has GS, CE, EMS, CSA, and UL certifications

Specifications: Voltage: 120V, 60Hz; Amperage: 12.5A; Weight: 3.1lbs; 2 Heat Setting: Low Heat: 572°F (300°C); High Heat: 932°F (500°C); Air Volume: Low Heat: 10 cfm (280L/min); High Heat: 17 cfm (480 L/min); Wattage: Low Heat: 1000W; High Heat: 1500W


HO

P T

OO

LS

929

HEAT GUNS

MLW8975-6Dual Temperature Heat Gun• Dual temperature 570° and 1000° F; 11.6 amp motor• Unique impact resistant heating element• Efficient soft air velocity increases surface temperature much

faster than conventional hot air heat guns• Three position rocker switch: off, high and low

This professional line of heat guns offer ergonomic style and powerful heating elements. With stay cool handles and heat shields, you can use these all day while you stay cool. All this power and it only weighs 1.6 lbs.

MLW8977-20Variable Temperature Heat Gun• Variable temperature 140° to 1040° F; 11.6 amp tool• Unique impact resistant heating element• Efficient soft air velocity increases surface temperature much

faster than conventional hot air heat guns• Rotate rear housing to select temperature

This professional line of heat guns offer ergonomic style and powerful heating elements. With stay cool handles and heat shields, you can use these all day while you stay cool. The variable temperature adjustment allows you to dial in the proper temperature for your job. All this power and it only weighs 1.6 lbs.


MASPH1100KProheat® Heat Gun with 2 Attachments and Case• Two heats: 500 degrees F

and 1000 degrees F• 16 cfm air flow• Compact, light,

easy-to-use design• Made in the U.S.A.

IDIGB-20311Inductor Glass Blaster• Removes automotive glass• Removes spray-on bed liner• 110v power• Induction heater• Mounted in portable tool box

Includes: 1 ea. 110v Inductor power supply (22.5”W x 11”L x 10.3”H)(15.4 lb.) w/ hardwired U-311 & in box storage, 68” power cord, instructional DVD, 2 ea. L-0810A, & 1 year warranty.

HEAT INDUCTION

SH

OP

TO

OLS

930

SHOP ❘ tools, equipment

HEAT INDUCTION

IDIMD-500Mini-Ductor 12V• Heats ferrous and some non-ferrous metals without the danger

of an open flame using Invisible Heat. Releases thread lock compounded nuts, frozen manifold bolts, bearings, and more

• Prevent damage to nearby plastics, rubber, wiring and fuel lines eliminating unnecessary repair and install (R+I)

• Completely hand-held, ergonomic, grenade style grip and a bright LED to illuminate work area

• Works with all the Mini-Ductor coils and attachments• Operates with any 12-volt battery pack or off a car battery• Includes: 1 ea. Mini-Ductor® 12V with battery hook-up clamps

(14¾”L x 2¾”D)(4.8lbs) inside custom fit storage case (17”W x 10”D x 5”H), (1 each) MD99-601, MD99-602, MD99-610 and instruction manual • 1 year limited warranty

IDIMD-700Mini-Ductor II Magnetic Induction Heater Kit• lluminating L.E.D. for

increased vision of product application• Operates on 120 volts/1000 watts of power• Faster and safer than a torch • Grenade grip• Uses high frequency magnetic fields to heat

metal and only metal, induction heat

IDIMDV-777Mini-Ductor Venom®

• Coil Twist Lock: coils now lock down with one simple turn (no more thumb screws) and Venom works with all Mini-Ductor coils

• Angled Design with Trigger • LED Usage Indicator• User Controlled LED Switch: as long as the tool is powered and the internal power supply is operating, the LED will remain lit when the switch is on• Two Year Limited Warranty






IDIIM-IND2011Inductor Max HD Kit• Includes upgraded U series attachments• Portable case with storage for attachments• Audible and visual power indicators• UL/CSA Listed GFI protection for safety• Operates on convenient 120V/20A/2200W output• 1 yr warranty on material and workmanship

IDIMDV-790Mini-Ductor Venom with Coil Kit• Coil twist lock • Includes coil kit• LED usage indicator • Fault override delay• 2 yr warranty on material and workmanship


HO

P T

OO

LS

931

HEAT INDUCTION

IDIMD99-650Mini-Ductor Coil Kit• The Mini-Ductor Coil Kit includes 8 different coils,

7 different sizes for most jobs mechanics run into• Heat and expand frozen, rusted, or thread-lock compound

nuts with out the collateral damage from a flame• Uses high frequency magnetic fields to heat metal a

nd only metal, induction heat• Operates on 120 volts/1000 watts of power• Faster and safer than a torch• Loosen seized hardware, bearings, gears, pulleys, lug nuts,

inline applications, fuel tank straps, pdr applications (paintless dent repair), O2 sensors, and much more!

IDIMD99-675Mini-Ductor Long Coil Kit• Designed for use with the Mini-Ductor II

and the Inductor U-555Includes:(2) 1” Preformed Coil (13.25”L x 1.75”W)(2) 7/8” Preformed Coil (13.25”L x 1.25”W)(1) 3/4” Preformed Coil (13.25”L x 1.25”W)(1) 1-3/4” Preformed Coil (13.25”L x 2.25”W)(1) 1-1/2” Preformed Coil (13.25”L x 2”W)(1) 1-1/4” Preformed Coil (13.25”L x 2”W)

IDIMD99-660Essential Coil Kit• Includes 8 of the most used smaller diameter coils

of varying lengths for removing stuck fasteners• Includes: (2) MD99-601 (7/8” Inside Diameter), (2) MD99-611

(3/4” I.D.), (1) MD99-605 (7/8” I.D. X 9”L), (1) MD99-610 (1” I.D.), (1) MD99-621 (7/8” I.D. Long Coil), (1) MD99-622 (1” I.D. Long Coil) in a storage tube

IDIMXP1120V Inductor Max Power Supply• High performance, energy

efficient inverter• Maximizes the use of a 120V/20amp circuit• Rated: input 2200W and max output 2000W• Offers audible and visual power indicators• Built with a pneumatic control that is resilient to dirt and water• UL/CSA GFCI for user safety • 1 year warranty• Includes: 1 each Inductor Max power supply

(22.5”W x 11”L x 10.3”H)(14.2 lb.) in storage box with room for attachments, 68” power cord, instructional DVD, instruction manual, 2 each L-0810A


IDIMD99-60123Coil Pack for Mini-Ductor• Heat and expand frozen, rusted, or thread-lock compound

nuts with out the collateral damage from a flame• Uses high frequency magnetic fields to heat metal and only

metal, induction heat• Operates on 120 volts/1000 watts of power• Faster and Safer than a torch

Variety coil pack for the Mini-Ductor replaces the original coils that come with the Mini-Ductor kit, which include:(1) MD99-601 7/8” preformed coil(1) MD99-602 U-form coil(1) MD99-603 Bearing Buddy coil

IDIMD99-XBB96Induction Innovations Flexible 96” Long Bearing Buddy Coil• Great flexibility and versatility for larger

bearings, gears, pulleys and industrial applications

• The coil will last for approximately 100 uses or more subject to use

• All coils are coated to eliminate oxidation and guarantee contact

• Coil is 96” in length• Flexible 96” Long Bearing Buddy Coil

SHOP - ToolWEB

Documents

Transcript of SHOP - ToolWEB