Tool Specification And Validation Data Sheet · 2015. 5. 21. · Tool Specification And Validation...
Transcript of Tool Specification And Validation Data Sheet · 2015. 5. 21. · Tool Specification And Validation...
-
Tool Specification And Validation Data Sheet
Miniature open ended spanner with accurate clean face Jaws openings which are offset at 15°. Manufactured to BS 1842, DIN 3110 from Chrome Alloy steel, hardened, tempered and chrome plated
Photo:
Nom length NSN Size Comment
the relevant part No.
-
--
Tool Specification And Validation Data Sheet
Specification No: METS/4/5/007
Tool Name: Spanner Double-ended - Open jaw BS/Whit
Specification:
Manufactured to DIN 3118/ISO 3318and ISO 10102 specification. Professional
quality, forged from chrome Alloy steel hardened, tempered and chrome plated.
Open jaw fixed. Head angle 15° Wrenching surface shape oval.
NSC
5120-99-9425967
5120-99-91 06228
5120-99-1203949
5120-99-91 06229
5120-99-1203950
5120-99-9106230
5120-99-1207888
5120-99-9106231
5120-99-1948808
5120-99-91 06232
5120-99-9106234
5120-99-9106233
5120-99-9506971
Status
Issue 1
Size BS!Whit
1A X 3/16
1A X 5/16
5/16 X 3/8
3/8 X 7/16
7/16 X 1/2
Y2 X 9/16
9/16 X 5/8
5/8 X 11/16
11/16 X 3/4
3/4 X 7/8
15/16 X 1-1/16
1 X 1-1/8
1-1/4 X 1-3/8
Authority
Nominal length (mm)
105
155
180
180
215
230
245
265
310
300
335
335
390
Date Issued
15/07/2011
Remarks/Notes:
Page 1 of 1 METS-4-5-007.doc
-
Tool Specification And Validation Data Sheet
description: Double ended open jaw spanners, jaw offset 15°. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to DIN 311 0/ISO 1085,3318,10102.
Size ("AF) Nominal length NSN Part No Comment(mm)
Paoe 1 of 1 METS-4-5-009 iss2.doc
-
Tool Specification And Validation Data Sheet
SJ)ef;tn~_.lon No & DMC:
Short ltfiD't N•me:
Proprietary Supplier Details:
Stanc;ta.rd!S:
MateriaJ/Anish:
Brit!f description:
METS/4/5/012 I DMC HTC4 Spanner double-ended- Open jaw, metric, chrome finish
DIN 3110, ISO 3318, ISO 1085, ISO 10102
Chrome alloy steel. Chrome plated
·Double Ended Open Jaw Metric Spanner with Jaws offset at 15". Manufactured to DIN 3110,
ISO 3318, ISO 1085, ISO 10102 from Chrome alloy steel. Chrome plated
Photo:
NSN
512()..99-1228419
512()..99-1353692
5120-99-1352504
5120-99-91 06287
5120-99-1357331
512()..99-1206707
5120-99-9106288
5120-99-91 06289
5120-99-91 06290
5120-99-1357332
5120-99-9106291
5120.99-9106292
5120-12-1333617
5120-99-9106293
5120-99-1357333
5120-99-91 06294
512Q-99-nnoo8
5120-99-3006075
512()..99-9106296
5120-99-n72180
5120-99-1357334
5120-99-9106297
5120-99-9106299
5120-99-1357335
5120-99-n72181
5120-99-1357336
5120-99-1227183
512()..99-1357337
5120-99-1227184
5120-99-1357338
~'
-
Tool Specification And Validation Data Sheet
Note/Issue Remarks:
1.
-
Tool Specification And Validation Data Sheet
Double-ended- Open jaw, metric, slim line Spanner with Jaws offset at 15". Manufactured from Chrome alloy steel, Chrome plated to DIN 3110, ISO 3318, ISO 1085, ISO 10102.
Photo:
Nom length NSN Size (mm) Part No Comment
Page 1 of 1 METS-4·5-015 iss2.doc
-
?
-
Tool Specification And Validation Data Sheet
Double ended open jaw spanners, jaw offset 15° each end. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to DIN 3110/ISO 1085,3318,10102.
Photo:
Comment
P::~nP 1 nf 1
-
Tool Specification And Validation Data Sheet
Manufactured to DIN 3110/ISO 1085,3318,10102 specification. Chrome Alloy steel, hardened, tempered and chrome plated.
Double ended open jaw spanners, jaw offset 15° x 75 o
Photo:
MFTS-4-'i-01A rlor.P~nA 1 nf 1
-
Tool Specification And Validation Data Sheet
Spanner wrench also known as wheel spanner or Wheel Valve keys. Used for freeing seized valves on board ship. Manufactured from one solid piece of forged Alloy steel.
NOTE: This wrench must be manufactured as a solid forging to prevent failure in use. Wrenches produced as a fabricated unit or extended version usually require one or two welds which could produce a stress point causing the tool to fail when in use.
Photo:
P::~nP. 1 nf 1
-
Tool Specification And Validation Data Sheet
Specification No: METS/4/8/002
Tool Name: Spanner Ring Double-ended - Deep Offset, AF sizes
Specification:
Manufactured to DIN 838/ISO 3318 specifications. Chrome Alloy steel,
hardened, tempered and chrome plated.
Deep offset 0 to 5 deg head to handle.
NSN
5120.99-9105967
5120-99-91 05968
5120-99-1276115
5120-99-9105969
5120-99-1276116
5120-99-91 05970
5120-99-1276118
5120-99-1276117
5120-99-9105971
5120-99-91 05972
5120-99-9105973
5120-99-6628728
5120-99-9105974
5120-99-1206716
5120-99-4656098
5120-99-91 05975
5120-99-9105976
5120-99-9105977
Remarks/Notes:
Size (ins)
5/16 X 3/8
7/16 X 1/2
1/2 X 9/16
9/16 X 5/8
19/32 X 11/16
11/16 X 3/4
3/4 X 7/8
25/32 X 13/16
13/16 X 7/8
7/8 X 15/16
15/16 X 1
7/8 X 1-1/16
15/16 X 1-1/8
1-1/16 X 1-1/8
1-1/16 X 1-1/4
1-1/4 X 1-7/16
1-5/16 X 1
1-5/8 X 1-13/16
1. Issue 2 - addition of item in Bold (x1)
Status Authority
Issue 2 -
Nominal length (mm)
205
212
225
225
245
265
285"
285
285
305
325
325
345
345
370
400
345
455
Date Issued
08/05/12
Page 1 of 1 METS-4·8·002 lss2.doc
-
Tool Specification And Validation Data Sheet
Spanner Ring Double- ended. Deep offset and 0-5 o head to handle. Manufactured from
Chrome Alloy steel, hardened, tempered and chrome plated to DIN 838/ISO 3318 & 10104.
Photo:
Nom length NSN Size (mm) Comment
nder their relevant part No's
11..4L'TC" A 0 I"'H"\1) (...,,..') A ......
-
Tool Specification And Validation Data Sheet
Chrome Alloy steel, hardened, tempered and chrome plated.
Brief description:
Spanner Ring Double-ended, Whitworth sizes, Deep offset 0 to 5 deg head to handle: Manufactured from Chrome Alloysteel, hardened, tempered and chrome plated to DIN 838/ISO 3318.
Photo:
•
Nom length Comment
1 . Current Supplier - nst the relevant part No.
Paqe 1 of 1 METS-4-8-004 iss2
-
Tool Specification And Validation Data Sheet
Spanner Ring Double-ended - Flat Offset, AF sizes and 15 deg head to handle. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to DIN 837/ISO 3318.
Photo:
Nom length Part No Comment
Page 1 of 1 METS-4-8-007 iss2
-
Tool Specification And Validation Data Sheet
Bi hexagon, Standard length -straight oo offset head.
Federal Spec GGG-W-001405 (American sizes), Chrome plated
Photo:
Nominal length Part No
1.
o..,,, 1 ,....; 1
-
Tool Specification And Validation Data Sheet
Spanner Ring Double- ended- Ratchet Flat, Metric sizes. Bi hexagon, straight oo head. Chrome plated and to Federal Spec GGG-W-001405 (American sizes).
Photo:
0 0
NSN Size (mm) Part No· Comment
Page 1 of 1 METS-4-8·009 iss2.doc
-
Tool Specification And Validation Data Sheet
Spanner Ring Double- ended- Ratchet Flat, Metric sizes. Bi hexagon, straight oo head. Chrome plated and to Federal Spec GGG-W-001405 (American sizes).
Photo:
Nom length NSN Size (mm) Comment
1. Current Supplier r the relevant part No's
-
Tool Specification And Validation Data Sheet
cally blacked, and
Brief description:
Cranked ratchet ring spanner with a 25 degrees head to handle angle and bi-hexagonal offthe-point (flank) drive form. Lever change reversible ratchet mechanism.
item Photo:
NSN Size (mm) Comment
5120-01-4288643 7
200 200 225
1. Proprietary Suppl" r their part numbers as listed. ly technically acceptab
METS-4-8-01 0 lss3.doc Paae 1 of 1
-
Tool Specification And Validation Data Sheet
Spanner Ring Double-ended - Shallow Offset, Metric sizes, flank drive, 10 deg head to handle. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to ASME/ANSI 8107.6-1994 I SAE AS 954 I GGG-W-636E.
Photo:
NoNSN Size (mm) Comment
1. Current Supplier
-
-
-
Tool Specification And Validation Data Sheet
Spanner Ring Double- ended- Shallow offset, Standard length - Metric sizes, flank drive, 1 oo head to handle. Manufactured from Chrome Alloy steel, hardened, tempered and chrome plated to ASMEIANSI 8107.6-1994 I SAE AS 954 I GGG-W-636E.
Photo:
NNSN Size (mm) Comment
Note/Issue Remarks:
o.,,.,,. 1 nf 1
-
.·~·~----
-
Tool Specification And Validation Data Sheet
al
Brief description:
Spanner single-ended- Open jaw Imperial, forged from chrome Alloy steel 31CrV3 hardened, tempered. Black phosphate finish
Photo:
NSN Size ("AF) Comment
der their part numbers listed.
P::ln.::> 1 l"'f 1
-
Tool Specification And Validation Data Sheet
Strap Wrenches Chrome Alloy steel wrench with Nylon/Fibre Strap etc.
5120-00-0202947 has double ended square drive- 1/2 and 3/8 SO with Nylon strap 5120-99-1372663 & 5120-99-1206743 have wrenching bars with curved toe grip foot and plastic coated handle
Photo:
5120-00-020294 7 5120-99-1372663 & 5120-99-1206743
Strap BarCapacity
NSN Width length Comment(Ins)
(ins) (mm)
1. Current Supplier I under their respective part No's
-
Tool Specification And Validation Data Sheet
Wrench strap with 3/8 inch square drive, for torque wrench, with strap and rubber insert. Used for torque loading electrical connectors. Wrench handle made from Aluminium alloy, Nichol plate. Wedge made from stainless steel. Strap made from impregnated fabric, 1/2 -inch wide and 12 inch long. Suitable for connectors up to 2 inch diameter ·
Photo: ---6.$0
-
Tool Specification And Validation Data Sheet
Set of 16 long pattern flexible head ratcheting combination spanners, forged from chrome Alloy steel, hardened, tempered, chrome plated and fully polished throughout. Fixed open jaw set at 15 degrees and flexible head of ratchet end allows movement through 180 degrees with ratchetfng increments of only 5 degrees
Photo:
1. Current supplier their stock numbers as listed
-
------------------~--~-
-
Tool Specification And Validation Data Sheet
Socket 1/4" Square Drive- Bi-hex with Universal Joint, AF
Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection.
Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
CommentNSN Size (ins)
1. Current Supplier- er the Part Numbers listed.
Paae 1 of 1
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
NSN Size (mm) Comments
1. Current Suppli under Part Numbers listed
Page 1 of 1 METS-5-1-005 iss2.doc
-
wa
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining.
Photo:
r.
fr"l ~-·
1. Current Supplie r the respective Part Number listed
P~nA 1 nf 1
-
,Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
Comment
r respective Part Numbers
-
Tool Specification And Valida'tion Data Sheet
Socket 1 /4" Square Drive - Bi-hex, Metric.
Professional quality sockets made from chrome alloy steel hardened, tempered and chrome
plated for corrosion protection.
Manufactured to DIN 3120/ISO 1174, DIN 3122/.SO 3315, DIN 3123/ISO 3316, DIN 3124/ISO
2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as
applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
NSN Size (mm) Nominal length Part Number Comment (mm)
5120-99-13023 77 5.0 22.0
5120-99-13023 78 5.5 22.0
51 1302379 6.0 22.0
5120-99-1302380 7.0 22.0
5120-99-1302381 8.0 22.0
5120-99-1302382 9.0 22.0
5120-99-1302383 10.0 22.0
5120-99-1302384 11.0 22.0
5120-99-1302385 12.0 22.0
5120-99-1302386 13.0 22.0
5120-99-1302387 14.0 22.0
Note/Issue Remarks:
1.
http:3122/.SO
-
Tool Specification And Validation Data Sheet
Socket 1 /4" Square Drive- Hex, Metric Professional quality sockets, made from chrome alloy steel hardened, tempered and chrome plated for corrosion,protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
NSN Size (mm) Part Number Comment
r""''--- A .-Z A
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
1. er Part Numbers listed
P:=~nP 1 nf 1 AACTC t: -t r\-4 -4 :--1'\ _. __
-
---
-
Tool Specification And Validation Data Sheet
Socket 1/4" Square Drive- Bi-Hex Deep, Metric sizes. Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
N 5120-99-1226996
5120-12-1206649
5120-99-9576872
5120-99-1391605
5120-99-7944213
5120-99-817 4353
5120-99-9201648
5120-99-6671511
5120-99-4457553
5120-99-327 4212
5120-99-3911158
5120-99-8119706
Note/Issue Remarks:
1. Current Supplier.
Size (mm) 4.0
5.0
5.5
6.0
7.0
8.0
9.0
10.0
11.0
12.0
13.0
14.0
't..,~.,
_.,.___ ...J
50.0
50.0
50.0
50.0
50.0
50.0
50.0
50.0
50.0
50.0
50.0
under the Part Numbers Listed
Page 1 of 1 METS-'i-1-111? '""1 rinr
-
Tool Specification And Validation Data Sheet
Socket 1/4" Square Drive- Bi-hex, AF Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
Part Number Remarks
Page 1 of 1 MET5-5-l-013 lss6.doc
-
Tool Specification And Validation Data Sheet
Socket 1/4" Square Drive- Bi-hex, Semi-deep, AF Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
NSN Size (in) Nominal length (mm) Part Number Comment
1. Current the Part Numbers listed
-
1. LLt!Lt
-
___
Tool Specification And Validation Data Sheet
Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
Comment
r""'\ A_L.A
-
Tool Specification And Validation Data Sheet
Professional quality sockets made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining
Photo:
Page 1 of 1 METS-5-1-0151ss5.doc
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to Dl N 3120/ISO 117 4, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining.
Photo:
-• .
Nominal length NSN Size (AF") Comment
Note/Issue Remarks:
1.
D~n~ 1 nf 1
-
Tool Specificatio-n And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a hole for pin or ball retaining.
Photo:
Page 1 of 1 METS-5-2-004.doc
-
Tool Specification And Validation Data Sheet
Brief description: Socket 3/8 Square Drive- Bi- Hex Deep AF Professional quality sockets made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a through hole for pin or ball retaining.
Photo:
NSN Size (AF") Comment
Note/Issue Remarks:
Current Supplier
Page 1 of 1 METS-5-2-005 Iss 3.doc
-
Tool Specification And Validation Data Sheet
1.
Professional quality sockets and accessories, made from chrome alloy steel hardened,
tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174,
DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725,
ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
Comment
P~nP 1 nf 1
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a hole for pin or ball retaining.
Photo:
Page 1 of 1 MET5-5-2-007.doc
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
Nominal length NSN Size (mm) Comment
1. Current Supplier:
Page 1 of 1 METS-5-2-007 iss2.doc
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from ch_rome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a through hole for pin or ball retaining.
Photo:
Page 1 of 1 METS-5-2-012.doc
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B1 07, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
NSN Size (mm) Comments
\
1. the Part Numbers listed
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a hole for pin or ball retaining.
Photo:
Page 1 of 1 METS·5·3·003.doc
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened,
tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 117 4,
DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725,
ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
Nominal length Comment
P;::~np 1 nf 1
1.
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
Page 1 of 1 METS-5-3-006.doc
-
Tool Specification And Validation Data Sheet
I hardened, tempered and chrome plated for
Brief description:
Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, ~ DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, . ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
NSN Size (ins) Comment
1. r Part Numbers listed
-
----------------------
._ '
-
Tool Specification And Validation Data Sheet
steel hardened, tempered and finished in ate
Brief description:
Socket 1/2 Drive- Bi-Hex, Impact, Metric sizes Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and finished in black phosphate. Manufactured to DIN 3120/ ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a ring and pin safety ability.
Photo: Image shown may not be actual product but represents product
NSN Size (mm) Part Number Comments
1. r the Part Numbers listed above
P:=~n~=> 1 nf 1
-
Tool Specification And Validation Data Sheet
Socket 1/2 Square Drive- Hex, for 14 mm Spark Plugs,
Professional quality sockets and accessories, made from chrome alloy steel hardened,
tempered and finished in black phosphate. Manufactured to DIN 3120/ISO 1174, DIN
3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI
8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a ring and pin safety ability
Photo:
5
NSN Hex Size (ins) Nominal length
(ins)
I • • ~ II I •
I
Comments
Note/Issue Remarks: II • • I I A ~~ I t• I.
-
• t ' • .. .... • .N•, ·~·~..-...
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and finished with black phosphate. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
Nominal length NSN Size (ins) Comments
Note/Issue Remarks:
1. Current Supplier Jlder the Part Numbers listed
o .... ,,.... ,...f 1 1
-
Tool Specification And Validation Data Sheet
, tempered and black
Brief description:
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and black phosphated. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to h
Nominal length NSN Size (mm) Comments
o~,Q 1 nf?
-
Tool Specification And Validation Data Sheet
gthNSN Size{mm) Part Number Comments
~N~o~t~e~/ls_s_u_e~R~e-m-a-rk~s-:--~----------L-------------~ .__
1. Current Suppliers- '
Page 2 of 2 METS-5-3-015 iss2.doc
-
Tool Specification And Validation Data Sheet
Alloy steel hardened, tempered and black d.
Brief description:
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and black phosphated. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable;
All sockets to have a ring and pin safety ability
Photo: Image shown may not be actual product but represents product
Nominal length . . NSN Size (ins) Comments
5130-99-7660998 11/16
NoNSN 1-7/16
No NSN 1-1/2
No NSN 1 6
-
Tool Specification And Validation Data Sheet
Note/Issue Remarks:
1. ~r the Part Numbers listed ~---
Page 2 of 2 METS-5-3-017 iss2.doc
-
Tool Specification And Validation Data Sheet
Specification No & DMC: M ETS/5/3/0 19 I DMC HTC5 Short Item Name: Socket 1/2 Drive - Bi- Hex, Metric sizes Proprietary Suppl.ier Details: Standards: See Description Materiai/Fi n ish: Chrome alloy steel hardened, tem_Q_ered and chrome plated Brief description:
Professional quality sockets and ac~=::~:~h~~;;,:·:fl~y steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
_,
...........-~""-"".. ..,.~
NSN Size (mm) Nominal length
(mm) Part Number Comments
5120-12-3687159 8 38 t 5120-12-3687156 9 38
5120-99-1302367 10 38 ~ 5120-99-434 7308 11 38
I f\l
I
5120-99-434 7309 12 38
5120-99-434731 0
5120-99-4347311
13
14
38
38
f ... -.
' I
5120~99-4347312
5120-99-434 7313
5120-99-1381 024
5120-99-434 7315
15
16
17
18
38
38
38
38
'• .,..i
!
5120-99-4347316 19 38 ! ~·
5120-99-434 7317
5120-99-4347318
5120-99-1387001
20
21
22
38
38
38 ~-T
, ---!
i;. 5120-99-1229402 23 38 .. 5120-99-1360942 24 38
w• .,.._ ~~A ...~- < ~ •.- ...
No NSN 25 38 I
5120-99-13 79002 26 42
5120-99-1381 025 27 43 ~'VifiE("~'~"'...........
5120-99-977 4617 28 44 .
5120-99-1229511 29 44 ... ,5120-99-1382897 30 44
Paqe 1 of 2
~~
METS-5-3-019 lss3.doc
-
Tool Specification And Validation Data Sheet
NSN Size (mm) Part Number Comments
No NSN
5120-12-1235759 Note/Issue Remarks:
31
32
44 47
1. Current Supplien t Numbers listed
·r. ..r· r-.-"
• ~~,. ...... f :t ~ •
.... !
A•: ~~-· • -~ ... • • ~!~--~~. ,:. .... !,. ..
Page 2 of 2 METS-5-3-019 lss3.doc
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a through hole for pin or ball retaining.
Photo:
Note/Issue Remarks:
1. Current supplier i '
P:=~nP 1 nf 1
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion prote~tion. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
NSN Size (85-Whit) Nominal length Part Comments (mm) Number.
75
' 1. -··
METS-5-4-002 lss3.doc P:::~nP. 1 of 1
-
Tool Specification And Validation Data Sheet
Chrome Alloy steel hardened, tempered and finished in black
Brief description:
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and finished in black phosphate for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/180.3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a ring and pin safety ability
Photo:
,,. •, .: '\ f.~: ~ .. .· ' r r---------------~--------------~------~~------~--.
1. Current supplie~ ·om their part numbers as listed.
-
~,.. . .•. . AI;
-
--
Tool Specification And Validation Data Sheet
Specification No &DMC:
Short Item Name:
Proprietary Supplier Details:
Standards:
Material/Finish:
Brief description:
METS/5/4/006 j DMC HTCS Socket 3/4 Drive - Hex lm_p_act AF
.···~
See Descrip~ion Chrome Alloy steel hardened, tempered and finished in black phosphate
Professional quality sockets and accessories, made from Chrome Alloy steel hardened, tempered and finished in black phosphate. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a ring and pin safety ability.
Photo:
NSN
NoNSN
NoNSN
NoNSN
NoNSN
NoNSN
NoNSN
5130-00-2931411
5120-99-1377364
5120-99-1371434
5120-99-1377366
5120-99-1375722
5120~99-1375723 5120-99-1244139
5130-99-7731465
5130-99-7731466
5130-99-7731467
No NSN
5130-99-7731468
No NSN
NoNSN
5130-99-7731469
NoNSN
No NSN
NoNSN
NoNSN
No NSN
NoNSN
Size (AF") Nominal length (mm)
9/16 45
5/8 45
11/16 45
3/4 45
13/16 45
718 48
15/16 48
1.0 50
1-1/16 50
1-1/8 55
1-3/16 55
1-1/4 55
1-5/16 55
1-3/8 55
1-7/16 55
1-1/2 55
1-9/16 65
1-5/8 65
1-11/16 65
1-3/4 70
1-13/16 70
1-7/8 70
2.0 75
2-1/16 75
2-3/16 80
2-1/4 85
2-3/8 90
Page 1 of 2
Part Comments
Numbers
_l ' J-
1)i
..I ~ I
J
I
t ,..
i" -
I ~
,. ~ I.._-
METS-5-4-006 iss2.doc
-
Tool Specification And Validation Data Sheet
Note/Issue Remarks:
1. Current Suppli< the Part Numbers listed
'I. ··;
Page 2 of 2 METS-5-4-006 iss2.doc
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered. Black Phosphate finish for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954~E, as applicable.
All sockets to have a ring and pin safety ability.
Photo:
1 . Current Supplier- · .1nder respective Part Numbers listed
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel tYclrdened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 117 4, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
Nominal length NSN Size (mm) Part Number Comments
Note/Issue Remarks:
1. Current Supplier- * '- under their respective Part Numbers
-~
Page 1 of 1 METS-5-4-009 iss2.doc
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 117 4, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
"-"":::~, •'
i 0 > ~
'·
1. Current supplier ·-rt Numbers Listed
-
Tool Specification And Validation Data Sheet
Socket 3/4 Square Drive - Bi- Hex AF
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 117 4, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a through hole for pin or ball retaining. ·
Photo:
NSN Nominal length (mm) Pt No -- ----i
51
-------1
70 1-13/16 73
1
1. Current supplier ~mder their part numbers listed
-
Tool Specification And Validation Data Sheet
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and chrome platedfor corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725,. ASME/ANSI B 107, Federal Spec GGG-W-641, SAE AS954-E, as applicable. All sockets to have a through hole for pin or ball retaining.
Photo:
Note/Issue Remarks:
1. All sockets are available frorr'
Page 1 of 1 METS-5-4-0 13 Iss 2
-
' ..- ,,., !· • . ' -~" '
-
Tool Specification And Validation Data Sheet
,,-
Socket 1" Drive - Bi- Hex AF
Professional quality sockets and accessories, made from chrome alloy steel hardened,
tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174,
DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725,
ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
Supplied with locking pin.
Photo:
NominalNSN Size (AF") Part Number Comments
length (mm)
1. Current supplier- --a Part Numbers Listed
-
Tool Specification And Validation Data Sheet
Material/Finish:
Brief description:
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and corrosion resistant black finish. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable .
. All sockets to have a Ring and Pin safety facility
Photo:
Nominal length NSN Size (mm) Part Number Comments
Paae 1 of 2
--- - --lf---------1
-
Tool Specification And Validation Data Sheet
gthNSN Size (mm) Part Number Comments
1. Current Supplier- j:)r the relevant part No's. --~-~ ~ ,.....----=--·--
w~;~~~, -;~~~~i;i~t:~:~··:
:.~£t;-;;t;__:~t-~~~
~~f~it:~1r
~~l
~~'~1~:~~:~~·)
:~;;~c~~~ij~~ ·-1' ~... 1.-~ _. .'C • • : ~;. ·:·
•• ·:: _.- "1'• .,
... :~·:t;t~~!-·1~.... ;:~('~·.
~;:;~::f~~;~;.~;, .
.::.)~;::s~~-~ .-; ·;)~.. -tt:r;- .~;~ ~
.·!-_~
·,
Page 2 of 2 METS-5-5-003 lss3.doc
-
Tool Specification And Validation Data Sheet
Chrome alloy steel hardened, tempered and a corrosion resistant black finish
Brief description:
Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and a corrosion resistant black finish. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
~·All sockets to have a Ring and Pin safety ability.
Photo:
Part Number Comments
-+-----1
Note/Issue Remarks:
1 Current SL' ',I' ~der the Part Numbers Listed
Page 1 of 1 METS-5-5-006 iss2.doc
-
Tool Specification And Validation Data Sheet
Proprietary Supplier
Details:
Standards: DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316,
DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal GGG-W-641 SAE AS954-E
Material/Finish: Chrome Alloy steel hardened, tempered and corrosion resistant black finish
Brief description:
Professional quality sockets and accessories, made from chrome Alloy steel hardened, tempered and corrosion resistant black finish. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASME/ANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a Ring and Pin safety facility
Photo:
NNSN Size (mm) Comments
1. lier
-
Tool Specification And Validation Data Sheet
Specification No: METS/5/6/001
Tool Name: Crowfoot socket 1/2" Drive - Flare Nut, Bi-hex, AF
Specification:
Professional quality sockets and accessories, made from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/JSO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
NSN
5120-99-1242275
5120-00-2292773
5120-00-2292774
5120-00-1816759
5120-00-1816760
. 5120-00-1816757
5120-00-1816758
5120-00-1816755
5120-00-1816756
5120-00-1816753
5120-00-1816754
5120-00-1816751
5120-00-1816752
5120-00-1816749
5120-00-1816750
5120-00-1816747
NoNSN
5120-00-1848382
Size (ins)
1-1/16
1-1/8
1-3/16
1-1/4
1-5/16
1-3/8
1-7/16
1-1/2
1-9/16
1-5/8
1-11/16
1-3/4
1-13/16
1-7/8
1-15/16
2
2-1/8
2-3/16
Drive to Wrench surface centres (mm)
28
29
30
31
32
33
34
35
36
37
38
40
41
42
43
44
46
47
-
Tool Specification And Validation Data Sheet
NSN
5120-00-1848385
5120-01-3487314
NoNSN
NoNSN
NoNSN
512o~oo-1848392
NoNSN
5120-00-1848396
-
"
Status
Size (ins)
2-1/4
2-3/8
2-7/16
2-9/16
2-5/8
2-11/16
2-314
3-1/8
Drive to Wrench surface centres (mm)
48
50
51
53
54
55
56
62
Authority Date Issued
9ffift eF Final 09/02/09-Remarks/Notes: Page 2 of 2 METS-5-6-001.doc
-
Tool Specification And Validation Data Sheet
Crowfoot socket drive, Open Ended.
P~ofessional quality sockets and accessories, made from chrome alloy steel hardened,
tempered and chrome plated for corrosion P.rotection. Manufactured to DIN 3120/ISO 1174,
DIN 312?/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725; DIN 3129/ISO 2725,
ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for Photo:
NSN Size (Ins)
i ! t ~ ~ ; ~ j< j ' f•' F ' ' ~ ~·
~' ' r~ ~it
i "t
'f ~
f, fr
f r~ :~ -}
t t
~--
~
t ?: -~
l l(
i• t'
f f~ tit W1
) ~\
c
f·' t,
~ • i ~
i ~~
)' i
> J. ' : "~
' >'
~ ~;
f ~
f
l•!
t d ~
lPage 1 of 2 METS-5-6-003 lss4.doc i I
-
Tool Specification And Validation Data Sheet
NSN Size (Ins)
Page 2 of 2 METS-5-6-003 lss4.doc
-
Tool Specification And Validation Data Sheet
Crowfoot socket drive, Open Ended.
Professional quality sockets and accessories, made from chrome alloy steel hardened,
tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174,
DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725,
ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a
Photo:
Page 1 of 2 METS-5-6-0031ss6.doc
-
r I
-
Tool Specification And Validation Data Sheet
recommended working Torque
inlb
Page 2 of 2 METS-5·6-003 lss6.doc
-
Tool Specification And Validation Data Sheet
Chrome alloy steel hardened, tempered and chrome plated for corrosion
Brief descri
Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
NSN Size (mm)
1.
Page 1 of 1 METS-S-6-005 iss2.doc
-
Tool Specification And Validation Data Sheet .
Professional quality sockets and accessories, made from chrome alloy steel hardened, tempered and chrome plated for corrosion protection. Manufactured to DIN 3120/ISO 1174, DIN 3122/ISO 3315, DIN 3123/ISO 3316, DIN 3124/ISO 2725, DIN 3129/ISO 2725, ASMEIANSI 8107, Federal Spec GGG-W-641, SAE AS954-E, as applicable.
All sockets to have a hole for pin or ball retaining.
Photo:
NSN Size(mm) Comments
1.
Page 1 of 1 METS-5-6-006 iss2.doc