Tilt-Wash Double-Hung Windows Contents...HP Sun/HP Sun Temp 3/8" Low-E/Temp Single-Pane Impact...

A R C H I T E C T U R A L D E T A I L F I L E 3-1 R E V . 0 3 / 0 5

T i l t - W a s h D o u b l e - H u n g W i n d o w s

Contents

Tilt-Wash Double-Hung Windows

Basic Unit Details - Tilt-Wash Double-Hung ....................................3-2

Basic Unit Details - Double-Hung Picture and Transom Window .......3-3

Options / Accessories

Andersen® Grilles .......................................................................3-4

Stools and Extension Jambs for Tilt-Wash Basic Units .................3-6

Stools and Extension Jambs for Double-Hung Picture Units ........3-7

Stools and Extension Jambs for Double-Hung Transom Units ......3-8

Combination Unit .......................................................................3-8

Joining Details ................................................................................3-9

Anchoring Methods .......................................................................3-12

Suggested Product Applications ....................................................3-13• Slim frame and sash profile maximize the field of view

• Excellent for creating window combinations

• Easy to clean.

• Low maintenance.

A R C H I T E C T U R A L D E T A I L F I L E3-2 R E V . 0 3 / 0 5


Vertical Section

Basic Unit Details - T ilt-Wash Double-Hung

Horizontal Section

Basic UnitScale 3" = 1'-0" (1:4)

Unit Dimension Width

Clear Opening Width

Rough Opening Width

1-7/8" (37)

1-7/8" (37)

1/4" (6) 1/4" (6)

1-5/16" (33)

4-1/2" (114)

3-5/16" (84)

3-5/16" (84)

JambJamb Lower sash

Upper sash

Optional Andersen®

insect screen

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

3-9/16" (91)

3/8" (10)

3/8" (10)

5/8" (16)

1/2" (13)

2-7/16" (62)

1-5/16"(33)

2-7/16" (62)

4-1/2" (114)1-5/16" (33)

1-1/2" (38)

1-1/2" (38)

Clea

r Ope

ning

Hei

ght

Optional Andersen® stool

High-Performance™insulating glass

Lower sash inopen position

Head

Check Rail

Sill

OptionalAndersen®

insect screen

Fibrex™ material sill



Vertical Section

Basic Unit Details - Double-Hung Picture (DHP) and Transom (DHT) Window

Horizontal Section

Picture UnitScale 3" = 1'-0" (1:4)

Glass Width


Rough Opening Width

2-7/16" (62) 2-7/16" (62)

1/4" (6)1/4" (6)

1-5/16" (33)

4-1/2" (114)

1/2" (13)

2-7/16" (62)

2-7/16" (62)

5/8" (16)

1-1/2" (38)

1-5/16" (33)

3/8" (10)

4-1/2" (114)

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

Glas

s He

ight

3/8" (10)

Optional Andersen® stool

Fibrex™ material sill

Cladaluminum

1-5/16" (33)

1/4" (6)

1/4" (6)

4-1/2" (114)

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

Glas

s He

ight

2-15/16" (75)

2-3/8" (60)

Clad aluminum

1-5/16" (33)

4-1/2" (114)

Glass Width


Rough Opening Width

3-5/16" (84) 3-5/16" (84)

1/4" (6) 1/4" (6)

Vertical Section

Horizontal Section

Transom UnitScale 3" = 1'-0" (1:4)




Andersen® Divided Light Grilles

White

Sandtone

Terratone®

Forest Green

3/4"

7/8"

1-1/8"

2-1/4"

With Spacer

Without Spacer

Maple

Oak

Prefinished

Pine

Colonial

Modified Colonial

Modified Col W/Check Rail

Prairie A

Short Fractional

Short Fractional W/Check Rail

Tall Fractional

Tall Fractional W/Check Rail

Victorian

Renaissance

Sunburst

Specified Equal Light

Custom

HP/HP Tempered

HP Sun/HP Sun Temp

3/8" Low-E/Temp

Single-Pane Impact

Available now

Available only with 3/8" glass through the Andersen Divided Light program

Please check with Andersen for availability

Andersen®400 Series Windows

Gla

ss

Patt

erns

In

terio

r Ty

pe

Wid

th

Exte

rior C

olor

Andersen®400 Series Doors

Case

men

t & A

wnin

g

Case

men

t Pic

ture

Win

dow

Glid

ing

Win

dow

Woo

dwrig

ht®

Doub

le-H

ung

& Tr

anso

m

Woo

dwrig

ht®

Pict

ure

Win

dow

Woo

dwrig

ht®

Arch

top

& U

nequ

al L

eg A

rcht

op

Woo

dwrig

ht®

Sprin

glin

e™ S

ingl

e-Hu

ng

Tilt-

Was

h Do

uble

-Hun

g &

Tran

som

Tilt-

Was

h Pi

ctur

e W

indo

w

Circ

le To

p™ &

Qua

rter R

ound

Arch

Sprin

glin

e™

Flex

ifram

e®

Ellip

tical

Circ

le &

Ova

l

Goth

ic

200

Serie

s Na

rrolin

e® D

oubl

e-Hu

ng &

Tran

som

Fren

chwo

od®

Glid

ing

Fren

chwo

od®

Hing

ed In

swin

g

Fren

chwo

od®

Hing

ed O

utsw

ing

Fren

chwo

od®

Patio

Doo

r Sid

elig

hts &

Tran

som

s



Andersen® Divided Light GrillePermanent ExteriorPermanent Interiorwith Spacer

Andersen® Divided Light GrillePermanent ExteriorPermanent Interior

Andersen® Divided Light GrillePermanent ExteriorRemovable Interior

RemovableInterior

Andersen® Finelight™Grilles-Between-the-Glass

3/32"

5/16"

5/16" 7/16"

7/16"

45˚

2-1/4"

53˚3/8"3/8"3/8" 53˚

7/8"

45˚45˚

3/4"

53˚ 35˚

1-1/8"

35˚

1/2"

1-13/16"

5/16" 7/16"

2-1/4"7/8"3/4" 1-1/8"

1/2"

7/8"3/4" 1-1/8"

1/2" 1-13/16"

5/16"5/16"5/16"

3/16"1/8" 5/16"

1/2"

1/8"

1/2" 1/2" 1/2" 1/2"

Permanent Exterior Fibrex® Material Grille Profiles (chamfer profile). Also used for pre-finished interior, except 400 Series Woodwright® double-hung windows.

Permanent Interior Wood Grille Profiles (chamfer profile).The Fibrex® material exterior grille is used when a permanent prefinished grille is specified, except with 400 Series Woodwright® double-hung windows.

Removable Interior Wood Grille Profile (roman ogee profile). Removable Interior Wood Grille Profile (Chamfer profile).400 Series Woodwright® double-hung windows only.

Permanent Full Divided Light Grille spacer location.

Andersen® Finelight™ Grilles-Between-the-Glass.

7/16"

7/8"3/4" 1-1/8"

3/8"

3/4"

1/2"

1"


Grille Profiles • Scale = Full • Dimensions include thickness of tape.

400 Series Grille Options



7-1/8" (181)Wall

6-9/16" (167)Wall

5-1/4" (133)Wall

23/32" (18)

2-1/32" (52)

2-19/32" (66)

1-27/32" (47)

3-27/32" (98)

For wall thicknesses up to 5-1/4" (133)


Extension Jambs

Stools

11/16" (17)

7-1/8" (181)

6-9/16" (167)

5-1/4" (133)

4-9/16" (116)

7-1/8" (181)

6-9/16" (167)

5-1/4" (133)

4-9/16" (116)

2-15/16" (75)

23/32" (18)

Optionalfactory appliedDP upgrade sill stop

3/8" (10)

Sill

Jamb

Head

OptionalAndersen®stool


Stools and Extension Jambs for T ilt-Wash Basic UnitsScale 3" = 1'-0" (1:4)

Extension jambs available for 5-1/4" (133), 6-9/16" (167) or 7-1/8" (181) wall thickness. Stools are available for wall thicknesses up to 5-1/4" (133) or 7-1/8" (181) thick. Other wall dimensions can be accommodated with stool and extension jamb modification. Extension jambs are predrilled for easy application (except for 5-1/4" (133) sizes).

Vertical Section



7-1/8" (181)Wall

6-9/16" (167)Wall

5-1/4" (133)Wall

23/32" (18)

2-1/32" (52)

2-19/32" (66)

1-27/32" (47)

3-27/32" (98)




Extension Jambs

Stools

11/16" (17)

7-1/8" (181)

6-9/16" (167)

5-1/4" (133)

4-9/16" (116)

23/32" (18)

2-15/16" (75)

7-1/8" (181)

6-9/16" (167)

5-1/4" (133)

4-9/16" (116)

3/8" (10)

Sill

Jamb

Head


Stools and Extension Jambs for Double-Hung Picture Units (DHP)Scale 3" = 1'-0" (1:4)

Vertical Section




7-1/8" (181)Wall

6-9/16" (167)Wall

5-1/4" (133)Wall

23/32" (18)

2-1/32" (52)

2-19/32" (66)

1-27/32" (47)

3-27/32" (98)



Extension Jambs

Stools

11/16" (17)

7-1/8" (181)

6-9/16" (167)

5-1/4" (133)

4-9/16" (116)

23/32"(18)

7-1/8" (181)

6-9/16" (167)

5-1/4" (133)

4-9/16" (116)

3/8"(10)

Sill

Jamb

Head


4-1/2" (114)1-5/16" (33)

Hinge member

Combination unit for triple glazing

Stationaryupper storm panel

Insectscreen

Operatinglower panel

Head

Check Rail

Sill


Jamb

Combination unit


Stools and Extension Jambs for Double-Hung Transom Units (DHT) Scale 3" = 1'-0" (1:4)


Vertical Section

Combination Unit Scale 3" = 1'-0" (1:4)

Vertical Section

At Head- Outer frame of combination unit fits into head jamb window unit. Hinges fastened to the exterior of the head jamb enables easy cleaning of the sill.At Check Rail - Strong aluminum check rail with stationary storm panel, insect screen and lower operating panel.At Jamb - Storm panel operates on smooth vinyl channels within the side stile frame members. Insect screen is located outside the storm panel.At Sill - Combination unit frame bottom rail with insect screen in place and operating lower panel in closed position.Complete unit furnished by Andersen, not applied to window unit.

Horizontal Section



Tilt-Wash Double-Hung to Tilt-Wash Double-Hung Scale 3" = 1'-0" (1:4)

Non-Reinforced Mullion

Joining Details

Steel Reinforced Mullion

Support Mullion



Support Mullion

Double-Hung Picture to Double-Hung PictureScale 3" = 1'-0" (1:4)

Unit Dimension Width Unit Dimension Width

1/8" (3)(Ref.)

Optional Andersen®

exterior vinyltrim strip setin continuousbead of sealanteach side

Optional Andersen®

interior trim

2-7/8" (73)


3/16" (5)

OptionalAndersen®


OptionalAndersen®

steelreinforced join

OptionalAndersen®

interior trim

2" (51)Unit Dimension Width Unit Dimension Width

Structuralsupportby others

OptionalAndersen®

2" supportmullionwood filler

OptionalAndersen® 2" support mullion trimstrip set in continuous bead of sealant eachside

Interior trimby others


1/8" (3)(Ref.)

Optional Andersen®


Optional Andersen®

interior trim

2-7/8" (73)


3/16" (5)

Optional Andersen®

steel reinforced join

Optional Andersen®

interior trim

Optional Andersen®


2" (51)Unit Dimension Width Unit Dimension Width



Optional Andersen®


Optional Andersen®

2" supporttrim strip set in continuousbead of sealant eachside

Joining Compatibility Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. Combination designs should always be checked for design pressure performance requirements to ensure the appropriate joining method is specified.





Support Mullion

Double-Hung Transom to Double-Hung TransomScale 3" = 1'-0" (1:4)


1/8" (3)(Ref.)

Optional Andersen®



2-7/8" (73)


3/16" (5)

Optional Andersen®

steel reinforced join

Optional Andersen®

interior trim

Optional Andersen®


2" (51)Unit Dim. Unit Dim.


Interior trinby others

OptionalAndersen®


OptionalAndersen®

2" supportmulliontrim strip set in continuousbead of sealant eachside

Joining Details

Joining Compatibilty Many Andersen® units are designed to be joined with other Andersen units in a variety of non-reinforced and reinforced combinations. Other combination types and joining methods can be viewed in the Andersen® Product Guide for Professionals, in Andersen Window Studio® software, and by visiting www.andersenwindows.com. Combination designs should always be checked for design pressure performance requirements to ensure the appropriate joining method is specified.



Joining Details

Double-Hung Transom (DHT) over T ilt-Wash Double-HungScale 3" = 1'-0" (1:4)

Vertical Section

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

Tilt-

Was

h Un

it Di

men

sion

+ D

oubl

e-Hu

ng Tr

anso

m U

nit D

imen

sion

= O

vera

ll Un

it Di

men

sion

4-1/2" (114)1-5/16" (33)

Unit

Dim

ensi

on H

eigh

t2-3/8" (60)

2-15/16" (75)

2-7/16" (62)

1/16" (2)

5/8" (16)

2-7/16" (62)

1/2" (13)

3-9/

16"

(91)

3/8" (10)

0"

3/8" (10)

1/8" (3)

Sill

Head

Transom

OptionalAndersen®trim



Standard application of installation flanges as shipped from Andersen to be used for 4-1/2" (105) wall construction. Tilt-wash double-hung window is secured in the opening by using threaded fasteners through the installation flange.

Anchoring Methods

Installation FlangeScale 3" = 1'-0" (1:4)

Standard Installation Flange ReversedScale 3" = 1'-0" (1:4)

Jamb ClipScale 3" = 1'-0" (1:4)

Regular installation flange in reverse position to accommodate a 4-1/8" (105) wall.

APPLICATION:

• First secure jamb clip to back side of window unit jamb(s)

• Apply 1' from corners of head jamb, sill and side jambs

• Space jamb clips evenly (maximum distance apart 32" on center)

• Jamb clip lateral design load capacity: maximum 200 lb.

4 1/2" (114)

3 1/2" (89)

1/2"(13)

1/2"(13)

Threaded Masonr y Fastener / Expansion SleeveScale 3" = 1'-0" (1:4)

Tilt-wash double-hung and double-hung transom (DHT) windows are secured in opening by removing the sash and jamb liners and drilling through the side jamb into the masonry. For double-hung picture (DHP) windows, remove the side jamb liner cover only.

4-1/8" (105)

Threaded fastener(furnished by others)

Jamb clip

Make sure that the unit frame parts do not become bowed when using anchoring methods. Unit will not operate properly if frame parts are stressed.

Double-hung window unit secured in opening by others using Andersen® 302 stainless steel sheet metal jamb clips and stainless steel screws. Bend the jamb clips to secure unit fit in opening. Installation flange can be cut, or removed, as required to accommodate the jamb clips.

Score markings for bending

3/16"(5)

1-1/2"(38)

3"(76)



Wall Types

Suggested Product Applications

Scale 1-1/2" = 1'-0" (1:8)

Roug

h Op

enin

g He

ight

Unit

Dim

ensi

on H

eigh

t

Rgh.

Opg

.W

idth

1/4"(6)

Unit

Dim

.W

idth

Sill

Jamb

Head

Installationflangeall around

Installationflange all around

Head

Jamb

Sill

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

Rgh.

Opg

.W

idth

1/4"(6)

Unit

Dim

.W

idth

*1/2" (13) minimum to accommodate differential shrinkage/expansion when brick is used with wood framing.

1/2" (13)*minimum

Removeinstallationflangeat head

Vertical SectionBrick Veneer / 2 x 6 Metal Stud Framing

Vertical SectionWood Siding / 2 x 4 Wood Stud Framing

Vertical SectionE.I.F.S. / Concrete Masonr y Unit (CMU)

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

Rgh.

Opg

.W

idth

Unit

Dim

.W

i dth

1/4"(6)

Installationflange allaround

Head

Jamb

Sill

Membrane flashing over installationflange(by others)

Importance of Proper InstallationProper installation and maintenance of Andersen® products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, Inc., Box 12, Bayport, MN 55003 or by visiting our website at www.andersenwindows.com. Remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. Installation of Andersen products, including method of attachment, fastener selection, and code compliance is the sole responsibility of the architect, building owner, contractor, and/or consumer.

Construction by OthersAndersen Corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration of the Andersen units with the weather-repellent system of the building is the responsibility of others.

NOTE: Where E.I.F.S. wall finish is adjacent to window units, contact E.I.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the

proper width of sealant joint around the perimeter of the window.

NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of framework. Installation flange may be removed where construction sequence/ detailing requires no flange.



Vertical SectionBrick / Concrete Masonr y Unit (CMU)

Vertical SectionStucco / Concrete Masonr y Unit

(CMU) Inset Window

Vertical SectionExisting Stud Wall

Vertical SectionExisting Masonr y Wall

Roug

h Op

enin

g He

ight

Unit

Dim

ensi

on H

eigh

t

1/4" (6)

Unit

Dim

.W

idth

Rgh.

Opg

.W

idth

Jamb

Head

Sill

Optional Andersen®

auxiliarycasing


Wall Types

Suggested Product Applications

Head

Jamb

Optional Andersen®

auxiliarycasing

Sill

Unit

Dim

ensi

on H

eigh

t

Installationflange at headand jambs

Roug

h Op

enin

g He

ight

Removeinstallationflangeat sill

1/4"(6)

Unit

Dim

.W

idth

Rgh.

Opg

.W

idth

Unit

Dim

ensi

on H

eigh

t

Roug

h Op

enin

g He

ight

Rgh.

Opg

.W

idth

1/4"(6)

Unit

Dim

.W

idth

Optional Andersen®

vinyl trim board

Existingframe wall


Head

Jamb

Sill

Roug

h Op

enin

g He

ight

Unit

Dim

ensi

on H

eigh

t

1/4"(6)

Unit

Dim

.W

idth

Rgh.

Opg

.W

idth

Existing masonry wall

Installationflange all around

Jamb

Head

Sill

Optional Andersen®

vinyl trimboard.Trim to fitas required.Finish trimmededge with Optional Andersenrigid vinylchannel

OptionalAndersenextension jambs

Importance of Proper InstallationProper installation and maintenance of Andersen® products are essential if optimum performance is to be fully attained. Written installation instructions which provide guidelines for proper installation are available for Andersen products from your local Andersen supplier or by writing to: Andersen Windows, Inc., Box 12, Bayport, MN 55003 or by visiting our website at www.andersenwindows.com. Remember that every installation is different. Andersen strongly recommends consultation with an Andersen product representative and with an experienced contractor, architect, or structural engineer prior to the installation of any Andersen product. Installation of Andersen products, including method of attachment, fastener selection, and code compliance is the sole responsibility of the architect, building owner, contractor, and/or consumer.

Construction by OthersAndersen Corporation is not responsible for the design of, conditions in, or performance of, adjacent wall or roof construction beyond the perimeter of the Andersen units. Proper integration of the Andersen units with the weather-repellent system of the building is the responsibility of others.

NOTE: Where E.I.F.S. wall finish is adjacent to window units, contact E.I.F.S. manufacturer for installation instructions, including the use of appropriate flashing, the proper use of sealant and backer rod, and the

proper width of sealant joint around the perimeter of the window.

NOTE: Leave adequate clearance between sill and masonry for caulking and dimensional change of framework. Installation flange may be removed where construction sequence/ detailing requires no flange.

Tilt-Wash Double-Hung Windows Contents...HP Sun/HP Sun Temp 3/8" Low-E/Temp Single-Pane Impact...

Documents

Transcript of Tilt-Wash Double-Hung Windows Contents...HP Sun/HP Sun Temp 3/8" Low-E/Temp Single-Pane Impact...