Tibial Plateau Leveling Osteotomy Plates - Veterinary...
Transcript of Tibial Plateau Leveling Osteotomy Plates - Veterinary...
Tibial Plateau Leveling Osteotomy Plates
With over 100 styles and sizes to choose from, finding the right plate can be a littleoverwhelming. Our item codes include the size and style of the plate, along with theplate features and the material if anything other than the standard implant gradestainless steel. We have come up with abbreviations so the codes are understandable.Here is a key for you.
B = B Style, universalL = L Style, lockingM = M Style, multipurposeO = O Style, licensed by SlocumP = PearlT = T Style, triangularTWO = TWO Style, tibial wedge osteotomyU = U Style, universalY = Y Style, multipurpose
+ = Size larger than 3.5, but smaller than 3.5 BroadB = BroadD = Compression HoleK = Locking Holes (non-locking screws can be used)P = Pre-bentLC = Low Contact
Please specify Right or Left when ordering TPLO Plates
T.P.L.O. CODE KEY
T.P.L.O. Weight Recommendations
> 2.0 10-20 lbs> 2.4 20-30 lbs> 2.7 30-40 lbs
40-60 lbs 60-90 lbs
90-120 lbs
> 3.5 Small > 3.5 > 3.5 Broad > 3.5 Jumbo 120 + lbs
www.vetimplants.com 6.1 email: [email protected]
Materials Information For Our T.P.L.O. Plates
VOI has always machined plates from solid bars of implant grade stainless steel. We have never used a “cast”, “stamped” or injection molding methods to mass-produce our plates.
Each year we purchase thousands of pounds of material in various shapes and diameters. The material is made to ASTM standards. VOI, Biomet, AESCULAP and most other manu-facturers choose to purchase this material from a select few mills based in Germany.
ASTM F 138 (round shape for screws)ASTM F 139 (rectangular shape for plates)
The material is “cold drawn”; this hardening process produces greater tensile strength.
Tensile strength: Measures the force required to pull something such as wire or a structural beam to the point where it breaks. Specifically, the tensile strength of a material is the maximum amount of tensile stress that the material can be subjected to before failure.
Strength:
2mm/N 598600.0 = ISPhcni erauqs / sdnuoP = ISP2mm/N 598.6 = ISKISK 100.0 = ISP
retemillim erauqs/margoliK 407.0 = ISKlacsapagem 598.6 = ISK )2mm/n( retemillim erauqs/notweN = ISP 0001 = ISKlacsapagem 598600.0 = ISP
N/mm2 = megapascal
From day one, all of our TPLO plates have been manufactured with this standard material(1,100 N/mm2).
We now offer plates that are easier to contour. The material remains ASTM F 139 ImplantGrade Stainless Steel; the only variation is we requested the material not be hardened tothe same level.
The plates we now refer to as being “soft” are approximately 500 N/mm2. Severalsurgeons have used them and they tell us they are similar in hardness to the Slocumplates.
For identification purposes; the “soft” plates are laser-marked as so on their side; this isthe only way to identify them. They are now available at no additional cost.
Feel free to e-mail specific technical questions to [email protected].
The V.O.I. TeamVeterinary Orthopedic Implants
www.vetimplants.com 6.2 email: [email protected]
Price:Description:Recommended for animals less than 30 lbs. $550.00
Description: Price:4” Long $19.00
Description: Price:6” Long $19.00
Price:Description:Recommended for animals more than 30 lbs. $650.00
Price:Description:1/8” diameter / 3.0 mm diameter 11” Long Pin Trocar Trocar $6.50
Jig Set Screws
Code: Description: Price:
OR-WE-SLSSETSCRW-5OR-WE-SLSSETSCRW-10
5mm long set screw. For use with TPLO Jig10mm long set screw. For use with TPLO Jig
$10.00$10.00
T.P.L.O. Jigs
www.vetimplants.com 6.3 email: [email protected]
Ruler (mm)0 10 20 30 40 50 60 70 80
B 2.7Code:
$87.00
Price:
Length: 53 mm Width: 8 mmThickness: 2.1 mm
B 3.5Code:
$87.00
Price:
B
Length: 64 mm Width: 10 mmThickness: 2.75 mm
B 3.5+Code:
$92.00
Price:
Length: 64 mm Width: 10 mmThickness: 3.10 mm
* * * ** *
* *
* Indicates locking holes
B 3.5+ KLCCode:
$97.00Price:
Length: 64 mm Width: 10 mmThickness: 3.10 mm
B 3.5 BroadCode:
$112.00
Price:
Length: 78 mm Width: 12 mmThickness: 4.8 mm
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.4 email: [email protected]
2.7 Plates
L 2.7 DKCode:
$82.00Price:Features:
Compression and locking holes, flat
* * *
Length: 41 mmWidth: 8 mmThickness: 3 mm
L 2.7 DKPCode:
$84.00Price:Features:
Compression and locking holes,
prebentLength: 41 mmWidth: 8 mmThickness: 3 mm
* * *
Length: 41 mmWidth: 8 mmThickness: 3 mm
L 2.7 DKLCCode:
$84.00Price:Features:
Compression and locking holes,
flat, low contact
* * *
L 2.7 DKPLCCode:
$89.00Price:Features:
Compression and locking holes,
prebent, low contact
Length: 41 mmWidth: 8 mmThickness: 3 mm
* * *
Ruler (mm)0 10 20 30 40 50 60 70 80
* Indicates locking holes
L
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.5 email: [email protected]
2.7 Broad Plates
L 2.7B DKLCCode:
$84.00Price:Features:
Compression and locking holes,
broad, low contact
Length: 58 mmWidth: 8.2 mmThickness: 4 mm
* *
** * L 2.7B DKPLCCode:
$89.00Price:Features:
Compression and locking holes,
broad, low contact, prebent
3.5 Plates
L 3.5 DKLCCode:
$85.00Price:Features:
Compression and locking holes,
low contact
Length: 58 mmWidth: 8.2 mmThickness: 4 mm
* * *
Length: 64 mmWidth: 10 mmThickness: 4.5 mm
* * * * * *
**
L 3.5 KPLCCode:
$87.00Price:Features:
Compression and locking holes,
low contact, prebent
Length: 64 mmWidth: 10 mmThickness: 4.5 mm
Ruler (mm)0 10 20 30 40 50 60 70 80
* Indicates locking holes
L
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.6 email: [email protected]
3.5 + Plates
L 3.5+ DKLCCode:
$103.00Price:Features:
Compression and locking holes,
low contact
Length: 72 mmWidth: 11.25 mmThickness: 4.0 mm
* * * *
L 3.5+ DKPLCCode:
$108.00Price:Features:
Compression and locking holes,
low contact, prebent
Length: 72 mmWidth: 11.25 mmThickness: 4.0 mm
* * * *
3.5 Broad Plates
Length: 79 mmWidth: 12 mmThickness: 4.5 mm
L 3.5B DKLCCode:
$113.00Price:Features:
Compression and locking holes,
low contact, broad
* * * *
*
Ruler (mm)0 10 20 30 40 50 60 70 80
* Indicates locking holes
L
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.7 email: [email protected]
3.5 Broad Plates ( cont. )
Code:L 3.5B DKPLC $118.00
Price:Features: Compression and
locking holes, low contact,
broad, prebentLength: 79 mmWidth: 12 mmThickness: 4.5 mm
* * * *
*
L 3.5B KPLCCode:
$117.00Price:Features:
All locking holes, low contact,
broad, prebent
Length: 79 mmWidth: 12 mmThickness: 4.5 mm
* * * * * * * *
**
*
Ruler (mm)0 10 20 30 40 50 60 70 80
* Indicates locking holes
L
Shop Online: www.vetimplants.com
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.8 email: [email protected]
2.7 Plates
2.7 Broad Plates
3.5 Plates
Length: 41 mmWidth: 8 mmThickness: 3.2 mm
LS 2.7 DKCode:
$87.00Price:Features:
Compression and locking holes,
low contact, flat
Code:LS 2.7B DKLC $84.00
Price:Features: Compression and
locking holes, low contact
LS 3.5 DKLCCode:
$82.00Price:Features:
Compression and locking holes,
low contact
Ruler (mm)0 10 20 30 40 50 60 70 80
* Indicates locking holes
LS
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
Length: 64 mmWidth: 10 mmThickness: 4.5 mm
* * *
* * *
Length: 41 mmWidth: 8 mmThickness: 3.2 mm
*LS 2.7 DKLCCode:
$82.00Price:Features:
Compression and locking holes,
low contact
* * *
* * *
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.9 email: [email protected]
Code:LS 3.5 + DKLC $103.00
Price:Features: Compression and
locking holes, low contact
3.5 Broad Plates
Code:LS 3.5B DKLC $103.00
Price:Features: Compression and
locking holes, low contact
Code:LS 3.5 + DKPLC $108.00
Price:Features: Compression and
locking holes, low contact,
prebent
Code:LS 3.5B DKPLC $117.00
Price:Features: Compression and
locking holes, low contact,
prebent
3.5 + Plates
Ruler (mm)0 10 20 30 40 50 60 70 80
* Indicates locking holes
LS
Length: 72 mmWidth: 11.25 mmThickness: 4.0 mm
Length: 72 mmWidth: 12 mmThickness: 4.5 mm
Length: 72 mmWidth: 11.25 mmThickness: 4.0 mm
Length: 72 mmWidth: 12 mmThickness: 4.5 mm
* * * *
* * * *
* * * *
*
* * * *
*
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.10 email: [email protected]
Code:LS 3.5 Jumbo $152.00
Price:Features: Compression and
locking holes, low contact,
prebent
Length: 100 mm Width: 16.5 mm Thickness: 4.5 mm
Ruler (mm)0 10 20 30 40 50 60 70 80
* Indicates locking holes
LS3.5 Jumbo Plate
*
****
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.11 email: [email protected]
MP 2.0Code:
$85.00Price:
MP 2.7Code:
$85.00Price:
MP 3.5Code:
$85.00Price:
Features:Compression,low contact,matte finish
Features:Compression,low contact,matte finish
Features:Compression,low contact,matte finish
MPRuler (mm)0 10 20 30 40 50 60 70 80
* Indicates locking holes
Length: 28 mmWidth: 5 mmThickness: 1.2 mm
Length: 44 mmWidth: 8 mmThickness: 2.0 mm
Length: 60 mmWidth: 10 mmThickness: 2.7 mm
www.vetimplants.com 6.12 email: [email protected]
O 2.0Code:
$57.00Price:Features:
Compression holes, flat
2.0 Plates
2.7 Plates
Length: 34 mmWidth: 6.5 mmThickness: 2.5 mm
O 2.7 NCode:
$77.00Price:Features:
Compression holes, narrow,
flat
O 2.7 N 3Code:
$77.00Price:Features:
Compression holes, narrow,
flat
Length: 34 mmWidth: 6.5 mmThickness: 2.5 mm
Length: 341 mmWidth: 8.0 mmThickness: 2.5 mm
O 2.7 Code:
$77.00Price:Features:
Compression holes, flat
Length: 28 mmWidth: 5 mmThickness: 1.5 mm
ORuler (mm)0 10 20 30 40 50 60 70 80
www.vetimplants.com 6.13 email: [email protected]
2.7 Broad Plates
O 2.7B DLCCode:
$84.00Price:Features:
Compression holes, low contact
O 2.7B DPLCCode:
$87.00Price:Features:
Compression holes, low contact,
prebent
O 2.7B LCCode:
$82.00Price:Features:
Compression holes, low contact
3.5 Plates
O 3.5 DCode:
$67.00Price:Features:
Compression holes, flat
Ruler (mm)0 10 20 30 40 50 60 70 80
O
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
Length: 64 mmWidth: 10 mmThickness: 4.5 mm
www.vetimplants.com 6.14 email: [email protected]
3.5 Plates ( cont. )
O 3.5 DLCCode:
$70.00Price:Features:
Compression holes, low contact
O 3.5 DPCode:
$72.00Price:Features:
Compression holes, prebent
O 3.5 LCCode:
$70.00Price:Features:
Compression holes, low contact
Ruler (mm)0 10 20 30 40 50 60 70 80
O
Length: 64 mmWidth: 10 mmThickness: 4.5 mm
Length: 64 mmWidth: 10 mmThickness: 4.5 mm
Length: 64 mmWidth: 10 mmThickness: 4.5 mm
Length: 64 mmWidth: 10 mmThickness: 4.5 mm
TI O 3.5 DLCCode:
$97.00Price:Features:
Compression holes, low contact,
titanium
www.vetimplants.com 6.15 email: [email protected]
3.5 + Plates
O 3.5+DLCCode:
$94.00Price:Features:
Compression holes, low contact
O 3.5+DPLCCode:
$96.00Price:Features:
Compression holes, low contact,
prebent
3.5 Broad Plates
O 3.5B DLCCode:
$112.00Price:Features:
Compression holes, low contact
Length: 72 mmWidth: 11.25 mmThickness: 4.0 mm
Length: 72 mmWidth: 11.25 mmThickness: 4.0 mm
Ruler (mm)0 10 20 30 40 50 60 70 80
O
Length: 79 mmWidth: 12 mmThickness: 4.5 mm
www.vetimplants.com 6.16 email: [email protected]
3.5 Broad Plates ( cont. )
Ruler (mm)0 10 20 30 40 50 60 70 80
O
Length: 79 mmWidth: 12 mmThickness: 4.5 mm
O 3.5B DPLCCode:
$114.00Price:Features:
Compression holes, low contact,
prebent
Length: 79 mmWidth: 12 mmThickness: 4.5 mm
O 3.5B* PLCCode:
$114.00Price:Features:
Low contact,prebent
www.vetimplants.com 6.17 email: [email protected]
2.7 Plates
2.7 Broad Plates
Ruler (mm)0 10 20 30 40 50 60 70 80 OS
Length: 41 mmWidth: 8.0 mmThickness: 3.0 mm
OS 2.7 Code:
$77.00Price:Features:
Compression holes, flat
OS 2.7B D Code:
$84.00Price:Features:
Compression holes, flat
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
OS 2.7B L *OS 2.7B R *
Code:$82.00Price:Features:
Compression holes, flat
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
OS 2.7B LCCode:
$82.00Price:Features:
Compression holes, low contact
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
www.vetimplants.com 6.18 email: [email protected]
2.7 Broad Plates ( cont. )
Ruler (mm)0 10 20 30 40 50 60 70 80 OS
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
OS 2.7B* LCCode:
$82.00Price:Features:
Compression holes, low contact
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
OS 2.7B** LCCode:
$82.00Price:Features:
Compression holes, low contact
Length: 58 mmWidth: 8.2 mmThickness: 4.0 mm
Code:OS 2.7B DPLC $87.00
Price:Features: Compression
holes, low contact, prebent
www.vetimplants.com 6.19 email: [email protected]
3.5 Plates
OS 3.5Code:
$67.00Price:Features:
Compression holes, flat
Length: 64 mmWidth: 10 mmThickness: 4.0 mm
Length: 64 mmWidth: 10 mmThickness: 4.0 mm
OS 3.5 L*OS 3.5 R*
Code:$67.00Price:Features:
Compression holes, flat
Length: 64 mmWidth: 10 mmThickness: 4.0 mm
OS 3.5 D Code:
$72.00Price:Features:
Compression holes, flat
Length: 64 mmWidth: 10 mmThickness: 4.0 mm
OS 3.5 DLC Code:
$82.00Price:Features:
Compression holes, low contact
Ruler (mm)0 10 20 30 40 50 60 70 80 OS
www.vetimplants.com 6.20 email: [email protected]
3.5 Plates ( cont. )
Length: 64 mmWidth: 10 mmThickness: 4.0 mm
OS 3.5* PLC Code:
$70.00Price:Features:
Compression holes, low contact,
prebent
OS 3.5+ DLCCode:
$97.00Price:Features:
Compression holes, low contact
Length: 72 mmWidth: 11.25 mmThickness: 4.0 mm
Length: 72 mmWidth: 11.25 mmThickness: 4.0 mm
Code:OS 3.5+ DLC L* OS 3.5+ DCL R*
$97.00Price:Features:
Compression holes, low contact
Ruler (mm)0 10 20 30 40 50 60 70 80 OS
3.5 + Plates
www.vetimplants.com 6.21 email: [email protected]
Code:OS 3.5+ DPLC $102.00
Price:Features: Compression
holes, low contact, prebent
OS 3.5B DCode:
$112.00Price:Features:
Compression holes, low contact
OS 3.5B DPCode:
$117.00Price:Features:
Compression holes, low contact,
prebent
Ruler (mm)0 10 20 30 40 50 60 70 80 OS
3.5 + Plates ( cont. )
Length: 72 mmWidth: 11.25 mmThickness: 4.0 mm
3.5 Broad Plates
Length: 78 mmWidth: 12 mmThickness: 4.5 mm
Length: 78 mmWidth: 12 mmThickness: 4.5 mm
www.vetimplants.com 6.22 email: [email protected]
Code:Pearl TPLO 2.7 $98.00
Price:
Code:Pearl TPLO 3.5 $104.00
Price:
Length: 37 mm
Length: 53 mm
* SLM L* SLM R
Code:
$112.00
Price:
* Indicates locking holes
*
Ruler (mm)0 10 20 30 40 50 60 70 80
* *
*
*Length: 78 mmWidth: 12 mmThickness: 4.5 mm
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.23 email: [email protected]
Code for non-matte finish: T 2.4 P
Code for matte finish: T 2.4 P M
Features: prebent, shiny
prebent, matte
Price:$97.00
$97.00
Code for non-matte finish: T 2.7
Code for matte finish: T 2.7 P M
Features:flat, shiny
prebent, matte
Price:$117.00
$117.00
Code for non-matte finish: T 3.5
Code for matte finish: T 3.5 M
Features:flat, shiny
�at, matte
Price:$97.00
$97.00
Code for non-matte finish: T 3.5 P
Code for matte finish: T 3.5 P M
Features: prebent, shiny
prebent, matte
Price:$97.00
$97.00
Length: 33 mmThickness: 2.0 mm
Length: 37.5 mmThickness: 2.0 mm
Length: 60 mmThickness: 2.0 mm
Length: 60 mmThickness: 2.0 mm
Ruler (mm)0 10 20 30 40 50 60 70 80 T
www.vetimplants.com 6.24 email: [email protected]
Code for non-matte finish: T 3.5B
Code for matte finish: T 3.5B M
Features:flat, shiny
�at, matte
Price:$117.00
$117.00
Code for non-matte finish: T 3.5B P
Code for matte finish: T 3.5B PM
Features:flat, shiny
prebent, matte
Price:$117.00
$117.00
Code for non-matte finish: T 3.5B D
Code for matte finish: T 3.5B D M
Features:flat, shiny
�at, matte
Price:$117.00
$117.00
Length: 75 mmThickness: 2.0 mm
Length: 75 mmThickness: 2.0 mm
Ruler (mm)0 10 20 30 40 50 60 70 80 T
www.vetimplants.com 6.25 email: [email protected]
2.0 PlatesCode:TWO 2.0 5
Holes:5
Price:$34.0010 mm
10 mm
10 mm
10 mm
10 mm
Code:TWO 2.0 6
Holes:6
Price:$34.00
Code:TWO 2.0 7
Holes:7
Price:$40.00
Code:TWO 2.0 8
Holes:8
Price:$40.00
Code:TWO 2.0 9
Holes:9
Price:$40.00
Length: 26 mmWidth: 5 mmThickness: 1.5 mm
Length: 26 mmWidth: 5 mmThickness: 1.5 mm
Length: 41 mmWidth: 5 mmThickness: 1.5 mm
Length: 41 mmWidth: 5 mmThickness: 1.5 mm
Length: 41 mmWidth: 5 mmThickness: 1.5 mm
Ruler (mm)0 10 20 30 40 50 60 70 80 TWO
Tibial Wedge Osteotomy
www.vetimplants.com 6.26 email: [email protected]
2.7 Plates
* **
**
16 mm
16 mm
Co eTWO 2.7 6
Holes6
rice$71.00
Co eL TWO 2.7 8
Holes8
rice$78.00
3.5 Plates
Co eTWO 3.5 6
Holes6
rice$90.00
Co eTWO 3.5 7
Holes7
rice$90.00
Co eL TWO 3.5 8
Holes8
rice$90.00
22 mm
22 mm
24 mm
* Indicates locking holes
Length: 39 mmWidth: 8 mmThickness: 2.0 mm
Length: 55 mmWidth: 8 mmThickness: 2.0 mm
Length: 55 mmWidth: 10 mmThickness: 3.0 mm
Length: 77 mmWidth: 12 mmThickness: 3.0 mm
Length: 79 mmWidth: 10 mmThickness: 3.5 mm
* * *
*
*
Ruler (mm)0 10 20 30 40 50 60 70 80 TWOTibial Wedge Osteotomy
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.27 email: [email protected]
* Indicates locking holes
U 2.0 DCo e
$67.00riceeat res
Compression holes
U 2.7 DKLCCo e
$72.00riceeat res
Compression
locking
U 3.5 DKLCCo e
$87.00riceeat res
Compression
locking
U 3.5B DKLCCo e
$102.00riceeat res
Compression
locking
* *
* *
* **
*
Length: 27.8 mmWidth: 5 mmThickness: 2.5 mm
Length: 45.3 mmWidth: 8 mmThickness: 3.0 mm
Length: 56.3 mmWidth: 10 mmThickness: 4.0 mm
Length: 76 mmWidth: 12 mmThickness: 4.5 mm
Ruler (mm)0 10 20 30 40 50 60 70 80 UUniversal
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.28 email: [email protected]
US 2.0 DCode:
$67.00Price:Features:
Compression holes
US 2.7 DKLCCode:
$72.00Price:Features:
Compression holes, low contact,
locking
US 3.5 DKLCCode:
$87.00Price:Features:
Compression holes, low contact,
locking
Code:US 3.5B DKLC $102.00
Price:Features: Compression
holes, low contact, locking
* *
* *
* **
*
Length: 27.8 mmWidth: 5 mmThickness: 2.5 mm
Length: 45.3 mmWidth: 8 mmThickness: 3.0 mm
Length: 56.3 mmWidth: 10 mmThickness: 4.0 mm
Length: 76 mmWidth: 12 mmThickness: 4.5 mm
* Indicates locking holes
Ruler (mm)0 10 20 30 40 50 60 70 80 USUniversal
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
Accepts LH ST or Cortical Screws
www.vetimplants.com 6.29 email: [email protected]
Tiny Plates
Length: 28 mmWidth: 6 mmThickness: 2.0 mm
Code for Left: YTL 2 DCode for Right: YTR 2 D
Features:compression
holes
Price:$107.00
$107.00
Length: 28 mmWidth: 6 mmThickness: 2.0 mm
Code for Left: YTL 3 DLC Code for Right: YTR 3 DLC
Features:compression
holes,low contact
Price:$107.00
$107.00
Length: 34 mmWidth: 7 mmThickness: 2.5 mm
Code for Left: YTL + DLC Code for Right: YTR + DLC
Features:compression
holes,low contact
Price:$107.00
$107.00
Ruler (mm)0 10 20 30 40 50 60 70 80 Y
* Indicates locking holes
www.vetimplants.com 6.30 email: [email protected]
Small Plates
Intermediate Plates
Length: 39 mmWidth: 8 mmThickness: 3.0 mm
Code for Left: YSLCode for Right: YSR
Features:compression
holes
Price:$107.00
$107.00
Length: 39 mmWidth: 8 mmThickness: 3.0 mm
Code for Left: YSL LCCode for Right: YSR LC
Features: compression
holes, low contact
Price:$107.00
$107.00
Length: 39 mmWidth: 8 mmThickness: 3.0 mm
Code for Left: YSL DKLC Code for Right: YSR DKLC
Features: compression
holes, low contact, locking
Price:$107.00
$107.00
Length: 50 mmWidth: 9.5 mmThickness: 3.0 mm
Code for Left: YIL DKLC Code for Right: YIR DKLC
Features: compression
holes, low contact, locking
Price:$107.00
$107.00
Ruler (mm)0 10 20 30 40 50 60 70 80 Y
* Indicates locking holes
*
* *
* *
*
For use with LH ST or Cortical ScrewsAvailable in Double Threaded p. 3.19
For use with LH ST or Cortical ScrewsAvailable in Double Threaded p. 3.19
www.vetimplants.com 6.31 email: [email protected]
Medium Plates
Large Plates
Code for Left: YML LCCode for Right: YMR LC
Features: compression
holes, low contact
Price:$107.00
$107.00
Features: compression
holes, low contact, titanium
Price:$137.00
$137.00
Code for Left: YLLCode for Right: YLR
Features:compression
holes
Price:$107.00
$107.00
Code for Left: YLL LCCode for Right: YLR LC
Features: compression
holes, low contact
Price:$107.00
$107.00
Ruler (mm)0 10 20 30 40 50 60 70 80 Y
* Indicates locking holes
Length: 59 mmWidth: 10 mmThickness: 4.0 mm
Length: 59 mmWidth: 10 mmThickness: 4.0 mm
Length: 79 mmWidth: 12 mmThickness: 4.5 mm
Length: 79 mmWidth: 12 mmThickness: 4.5 mm
Code for Left: TI YML LCCode for Right: TI YMR LC
www.vetimplants.com 6.32 email: [email protected]
Available in a locking Double Threaded version p 3.19
Available in a locking Double Threaded version p 3.20
Small Plates
Ruler (mm)0 10 20 30 40 50 60 70 80 SY
* Indicates locking holes
Soft
Length: 39 mmWidth: 8 mmThickness: 3.0 mm
Code for Left: S YSL LC Code for Right: S YSR LC
Features:compression
holes
Price:$107.00
$107.00
Length: 39 mmWidth: 8 mmThickness: 3.0 mm
Code for Left: S YSL DKLC Code for Right: S YSR DKLC
Features: compression
holes, low contact, locking
Price:$107.00
$107.00
Intermediate Plates
Length: 50 mmWidth: 9.5 mmThickness: 3.0 mm
Code for Left: S YIL DKLC Code for Right: S YIR DKLC
Features: compression
holes, low contact, locking
Price:$112.00
$112.00* *
*
For use with LH ST or Cortical Screws
* *
*
For use with LH ST or Cortical Screws
www.vetimplants.com 6.33 email: [email protected]
Medium Plates
Large Plates
Ruler (mm)0 10 20 30 40 50 60 70 80 SY
* Indicates locking holes
Soft
* *
* Code for Left:S YML DKLC Code for Right:S YMR DKLC
Features: compression
holes, low contact, locking
Price:$112.00
$112.00
Length: 59 mmWidth: 10 mmThickness: 4.0 mm
Length: 79 mmWidth: 12 mmThickness: 4.5 mm
Code for Left: S YLL DKLC Code for Right: S YLR DKLC
Features: compression
holes, low contact, locking
Price:$112.00
$112.00* * *
*
For use with LH ST or Cortical Screws
For use with LH ST or Cortical Screws
www.vetimplants.com 6.34 email: [email protected]
T.P.L.O. Case
Case Dimensions:365L x 110D x 195W
Inside Case:Screw racks sold separately
Case - Empty - $800.00
Y T.P.L.O. Tray ( empty ) - $250.00 O/L T.P.L.O. Tray ( empty ) - $250.00
NJ T.P.L.O. Tray ( empty ) - $250.00
Each tray holds 2 of each size plate.Ample room for various screw rack configurations.All trays feature space for one piece driver or a driver handle and one driver shaft.All trays accept both AO/QCK and Jacobs drill bits ( 2 of each size )
Customize your kit with one of 3 trays
www.vetimplants.com 6.35 email: [email protected]