Tech

nica

l Gui

de

www.sliders-uk.com

Part of the exclusive range available from Sliders UK

The Ultimate EvolutionAluminium bi-folding door

Cutting-edge innovation, Ultra slim sightlines and installation in as little as 45 minutes

End-user appeal and high margin ‘engineered-in’The Ultimate Evolution redefines bi-folding door design with a ‘hardware-first approach’.

It’s built around the latest innovation in hardware design, which ensures not only effortless operation and reliability – but also makes installation far simpler.

With ultra slim sightlines, a wide choice of colours, multiple threshold and double and triple glazed options,the Ultimate Evolution is an aluminium bi-folding door that delivers on end-user appeal – but also through-life performance.

1

ww

w.s

lider

s-uk

.com

Structural strengthThe Ultimate Evolution taps into the inherent strength of aluminium to deliver slim sightlines but also incredible design flexibility, accommodating larger individual panels, and multiple configurations to span openings of up to 8400mm*.

Advanced performanceA 30mm polyamide thermal break delivers impressive U-values, while the Ultimate Evolution is also fully BS6375 Weather Tested.

Exacting detail and flexibility in design BS6375 Weather Tested

PAS24 and Part Q approved

PAS24 tested and Part Q* compliant, the Ultimate Evolution features dedicated shoot-bolt intermediate locks operated by low projection handles and top shoot bolt for doors over 2500mm tall. Traffic doors incorporate a three-point dead latch and hook lock with dedicated strike plates.

ww

w.s

lider

s-uk

.com

3*Specified options only.*Subject to specific site conditions and wind loads.

Installation in 45-minutes

Simplified door squaring and settingIts’ highly innovative fully adjustable jamb means that the Ultimate Evolution is a highly ‘forgiving’ bi-fold to fit.

The easy-adjustment system delivers up to 8mm of tolerance, making if far simpler to align the door - even where apertures are out of square.

This dramatically simplifies door squaring and setting which means the Ultimate Evolution can be installed in as little as 45-minutes.

Standard profile coloursThe Ultimate Evolution is available in white, anthracite grey and anthracite grey-on-white, as standard.

We can also offer any RAL colour or combination of colours, on special order.

Polyester powder coated to BS/EN12206-1:2004, minimum finish thicknesses are 40 microns.

The finish is also guaranteed for 10-years.

Colour-matched hardwareThe Ultimate Evolution is also available in colour matched hardware plus chrome and satin finishes.

Finish options

Adjustable Jambs

Outerframe detail with adjustable jambs

5

ww

w.s

lider

s-uk

.com

Internal

External

Features and Benefits

• Maximum height 3000mm (with lock extension)• Maximum width 1200mm• Maximum sash weight 120kg• Multiple threshold options• Adjustable jambs for easy installation and adjustment• Ultra smooth bottom running• Slim sightlines• Stock colours on short reliable lead times• Dual Colour & Special Finishes available

• Intermediate doors have concealed shoot bolt locking with single point handle. Key locking optional

• Colour matched handles and magnetic door holders

7 Left 7 Right with bottom rolling• Opening either in or out• 30mm polyamide thermal break for increased thermal values• Inline system with sash and outer frame the same depth• Tested to BS6375-1:2004 and achieved Severe Weather Rating• Document Q Compliant, Including PAS 24 and BS6375 Part 1 & 2

Size & Weight Restrictions

* Indicates Document Q Compliance not available with this scheme (and it’s reverse, eg. 202 and 220).

Max Min

Overall Height: 3000mm 1800mm

Overall Width: 7000mm 1600mm

Max Panel Width: 1200mm 600mm

Weight Per Panel: 120KG

Prior to delivery, Sliders Ultimate folding and sliding doors will be fully assembled and their operation carefully checked.

No responsibility will be accepted unless the doors have been installed fully square and level in accordance with the code of practice for the installation of aluminium doors and windows (COP)W362/2.

Stock Colour Options

RAL 9910 White Gloss RAL 7016 Outside

RAL 7016 Anthracite Grey Matt RAL 7016 Inside

Sliders (UK) Limited Unit 232, Oldfield Road, Walton Summit, Bamber Bridge, Lancashire PR5 8BGT : 01772 698222 F : 01772 698333 E : sales@sliders-uk.com W: www.sliders-uk.com

Follow us on Twitter: twitter.com/sliders_uk

EVO Aluminium

The

2-0-2* 3-3-0 3-2-1 4-1-3 4-4-0* 4-2-2*

5-5-0 5-4-1 5-3-2 6-1-5

6-3-3 6-6-0* 6-2-4* 7-7-0

7-1-6 7-2-5

6.00±4.00

127.70mm [5"]

Outerframe detail with adjustable jambs

Adjustable Jambs Easy Installation

For ease of installation our new bi-fold system comes with adjustable jambs to both sides

These allow installers to correct issues that can sometimes take hours or days of repeat visits to sort out.

NB: Toe and heeling of sashes is still required.

45

Slim sightlines and inline system with sash and outer frame the same depth

Adjustable jamb – simplified squaring and setting

Ultra-smooth bottom running

Internally glazed accommodating 28mm and 35mm (triple glazed) IGUs

Standard colour options

Door handle options

Black White Anthracite Grey Chrome Satin

Anthracite Grey White Anthracite Grey on White

Technical informationCross sectionsConfigurations

*Indicates Document Q Compliance not available with this scheme (and it’s reverse, eg. 202 and 220).

With inward and outward opening options, the Ultimate Evolution offers exceptional design flexibility with 16 different configurations up to a maximum seven individual panels.

Intermediate lock with hinges and shoot-bolt Swing door jamb detail with adjustable section

7-1-6 7-2-5

6-3-3 6-6-0* 6-2-4* 7-7-0

5-5-0 5-4-1 5-3-2 6-1-5

2-0-2* 3-3-0 3-2-1 4-1-3 4-4-0* 4-2-2* 28 DGU

28 DGU

133

Ove

rall

Wid

th

61.5

61.5

10

INSIDE OUTSIDE

INSIDE OUTSIDE

73

73

Issued: DES 2016 DO NOT SCALE

Locking interm. with hinges and shoot bolt (DBE`102) - Open out

4A

46

28 DGU

73

6

130.

7 O

vera

ll W

idth

69.2

61.5

56.2

13

69.2

DBE-304

Seal withLow ModulusSiliconeSealant AfterFinalAdjustment

INSIDE OUTSIDE

8.1

55

73

*Note: Use DBA1-140 Brush instead of DBA1-138

on outer frame, to prevent binding if sliding post

DBE-202 is used.

Issued: DES 2016 DO NOT SCALE

Swing door jamb detail with adjustable section (DBE102) - Open out

6A

50

7

ww

w.s

lider

s-uk

.com

Technical information Threshold options The Ultimate Evolution

Standard threshold Maximum sash height and width 3000mm x 1200mm (maximum individual panel weight 120kg)

Multiple configurations including open in or out

Ultra-smooth bottom running

Adjustable jamb – simplified squaring and setting

Slim sightlines and inline system with sash and outer frame the same depth

White, anthracite grey and anthracite grey-on-white, as standard colours. Any RAL colour or combination on special orders

Colour matched handles and magnetic door holders

Low threshold options

30mm polyamide thermal break for increased thermal values

Internally glazed accommodating 28mm and 35mm (triple glazed) IGUs

U-values ranging from 1.4Wm2/K to 1.7Wm2/K

Part Q Compliant, Including PAS 24 and BS6375 Part 1 Weather Testing

Low threshold*

Issued: DES 2016 DO NOT SCALE

DBE-001Standard SillOuter Frame

Denotes Primary Visible SurfaceDenotes Secondary Visible Surface

DBE-002Head/JambOuter Frame

5555

73

36.536.5

3535

16.16

81.1

81.1

16.16

73

36.536.5

12

DBPR-001St/St RunningTrack

5

12

Issued: DES 2016 DO NOT SCALE

Denotes Primary Visible SurfaceDenotes Secondary Visible Surface

Thermal Infil(Pour and Cut)

36.95 45.15

20

82.1

DBE-011150 mm DrainageSub Sill

DBE-004Low Threshold Sill

150

25

32.3

39.3 35.5 75.2

13

Issu

ed: D

ES

201

6D

O N

OT

SC

ALE

Den

otes

Prim

ary

Vis

ible

Sur

face

Den

otes

Sec

onda

ry V

isib

le S

urfa

ce

Ther

mal

Infil

(Pou

r and

Cut

)

36.9

545

.15

20

82.1

DB

E-0

1115

0 m

m D

rain

age

Sub

Sill

DB

E-0

04Lo

w T

hres

hold

Sill

150

25

32.3

39.3

35.5

75.2

13

9

ww

w.s

lider

s-uk

.com

*Low threshold anodised silver only.

Images shown are for illustration purposes only.

Contact a member of the sales team on 01772 698222 or email sales@sliders-uk.com to find out more.

www.sliders-uk.com

High precision manufacture

We employ the strictest quality management system, going far beyond our BSI approved controls.

This includes the manufacture of doors on rigs, which means that all running and door operation is fully tested before doors leave the factory floor.

Fully wrapped and delivered by our dedicated fleet, it means that we’re able to offer you guaranteed quality and service.