We’re ISO 9001 Certified. ISO certification at Central Moloney Components providesthe basis for control and continuous improvement. Central Moloney believes that making qualityproducts requires the full understanding and commitment of each employee. Employees aremade aware of the company objectives and quality policy by training, quality assurance proce-dures, and quality audits.

The Storied History of Central Moloney, Inc. Headquartered in Pine Bluff, Arkansas, The Components Division of Central Moloney, Inc. is aleading manufacturer of electrical distribution components, in operation since 1970. CentralMoloney, Inc. grew from the 1965 merger of Central Transformer Corporation – originally LarkinLectro Products Company, founded in 1949 – and Moloney Electric, founded in 1896. The Cen-tral Moloney Transformer Corporation was acquired by Colt Industries in 1968 and later thename was changed to Coltec Industries. In 1994, senior management of Central Moloney Trans-former acquired the company from Coltec, and in 1998, converted to an Employee Stock Ownership Plan (ESOP) corporation. With our own “skin in the game,” Central Moloney’s management and employees are committed to superior product quality and customer service.

ABS Quality EvaluationsCertificate of Conformance

This is to certify that the Quality Management System of:

Central Moloney, Inc.

Components Division

5500 Jefferson Parkway

Pine Bluff, AR 71602

U.S.A.

has been assessed by ABS Quality Evaluations, Inc. and found

to be in conformance with the requirements set forth by:

ISO 9001:2008

The Quality Management System is applicable to:

THE DESIGN AND MANUFACTURE OF COMPONENTS FOR ELECTRICAL DISTRIBUTION TRANSFORMERS AND SWITCHGEAR

Certificate No: 48157

Original Certification Date: 16 November 2012

Effective Date: 27 February 2013

Expiration Date: 04 March 2016

Revision Date: 27 February 2013

Alex Weisselberg, President

Validity of this certificate is based on the periodic audits of the management system defined by the above scope and is contingent upon prompt, written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof.

ABS Quality Evaluations, Inc. 16855 Northchase Drive, Houston, TX 77060, U.S.A.Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation.

Since 1970, Central Moloney Componentshas led the industry with innovative productsthat improve the quality and reliability of elec-trical distribution equipment.

With transformers and switchgear known tobe in service from 20 to 40 years, CentralMoloney components are produced to thehighest industry standards in order to ensurethey will provide trouble-free performance forthe expected life of the host equipment.

From initial design and prototyping, throughtesting, to stringent quality control, we utilizethe latest technology in the production of ourhigh-quality components.

We employ a range of manufacturing tech-nologies, including casting, transfer molding,pressure gelation, and thermoplastic injectionmolding.

Experienced, highly-skilled technicians utilizesophisticated testing equipment in our state-of-the-art laboratory to ensure that the qualityand design of Central Moloney componentsare the best values in the electrical compo-nents industry.

Whatever your component requirements maybe – from a one-off replacement of a rarebushing – to millions of secondary bushingsfor overhead transformers, we can supplyyour needs on time and on budget.

We Produce Top-Quality Products Using State-of-the-Art Technology

HV Bushing Well, Tuf Well II LV Bushings, Tuf ExMount HV Bushing Well, Tuf ExWell II

600 Amp Deadbreak Bushing 600 Amp Deadbreak Bushing 600 Amp Apparatus Bushing

Dual Stud Weld Flange Bushings LV Weld-In Bushings

Shedlock Guard Weld Well Bushings

Terminal Blocks 200 KV BIL Terminal Blocks 125 KV BIL 300 Amp Load Break Switches

LV Network Bushings LV Speed Mount Bushings Drip Shields

Current-Limiting Fuse Holders Terminal Boards Dual Voltage Switches

Shedwells, 200 Amp Pole-Type Deadtop Bushing Wells A.B. Cap Guard

CT Junction Blocks

Tap Changers Large Secondary Bushings HV Bushing Wells, Thermoset

ShedmountWildlifeGuards

We Ship What You Need, When You Need It. You can count on Central Moloney Components to help keep your production line runningsmoothly, because we maintain a large inventory of our most frequently shipped items. Our69,000-sq.-ft. facility is located in Pine Bluff, Arkansas, in the geographical center of the U.S.We can even ship urgent orders of specially labeled and bar-coded product overnight as weare just minutes away from Little Rock’s airport.

We’re Still the Industry Leader. We led the industry in the unique application of engi-neered thermoplastics for transformer components. With our history as proof, new product development is a high priority at Central Moloney Components. A number of CM patents serveas testimony to the originality of our new design effort. We not only welcome, we encouragefeedback from customers on ideas for new and improved products.

Test Bushings

Our unique application of engineered thermo-plastics has revolutionized the industry. Upgrading thermoset and porcelain productswith thermoplastic designs allows improve-ment in product strength, weatherability, sealing, size and – importantly – cost.

The trending material for components is ther-moplastics, but many products are still bestwhen made of thermoset material.

Because thermoplastics solidify as they coolto a temperature below their melting point,they are limited to applications using thin-walldesign. Thermoset resin hardening resultsfrom the chemical reaction of mixture com-ponents, and are suitable for designs that require a thick cross section. Our engineersunderstand these properties, and will selectthe best material for your product application.

Central Moloney offers the industry’s broad-est array of thermoset epoxy components. Ofhigh-grade cycloaliphatic epoxy, our castcomponents offer superior tensile strength,weathering and electrical attributes.

For high-volume production runs, we usemulticavity steel molds in a high-pressuretransfer molding process. Additionally, ourgravity casting department uses cost-effec-tive aluminum tooling to introduce new prod-ucts at a fraction of the production cost ofother methods.

We can also use this low-cost, low-volumetechnology to provide the exact replacementfor your leaking secondary bushing or an-other specialty product at modest pricing.

“Assembled in U.S.A.” It’sNot Just a Marketing PhraseWhen we talk about manufacturing our product line in theUnited States, we mean it. No fudging. No backpedaling.Approximately 100 local area citizens are employed at ourPine Bluff, Arkansas plant, carefully manufacturing andshipping our components to customers worldwide. Weare proud to support our families, our community, and in-directly, thousands of workers across the United States.

Thermoplastics or Thermoset: We Are Molding and Casting Geniuses

We Want to BeYour ComponentSource Our valued customers have a standinginvitation to tour our plant, meet ourstaff, see our manufacturing capabil-ities, and collaborate on solutionsto your component needs.

Our global headquarters, locatedin Pine Bluff, Arkansas, is just a40-minute highway drive fromLittle Rock’s Clinton NationalAirport.

Get in touch and we’ll help youplan your next visit.

5500 Jefferson Parkway • Pine Bluff, Arkansas 71602870.247.5320

info@cmicomp.com • Fax 870.247.5369

www.centralmoloneyinc.com

©2013 C

entr

al M

olo

ney,

Inc.