The MineSight 2017 Release 9 , released on December 19...
-
Upload
phungduong -
Category
Documents
-
view
255 -
download
12
Transcript of The MineSight 2017 Release 9 , released on December 19...
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
The “MineSight 2018 Release 1”, released on March 13, 2018 is a full installation of MineSight®.
This Bundle release includes the MineSight product versions listed below. Click on a link below to go to
the Release Notes for each product.
If you have any questions about this installation, please contact Hexagon Mining Technical Support.
Table of Contents:
MineSight 3D (MS3D) v13.0
MineSight Atlas (MSAtlas) v4.3
MineSight Basis (MSBasis) v17.50
HxM Blast (HxMBlast) v3.40.1
MineSight Data Analyst (MSDA) v3.30-6
MineSight Economic Planner (MSEP) v4.00-6
MineSight Planner (MSPlanner) v4.2
MineSight Schedule Optimizer (MSSO) v11.20
MineSight Strategic Planner (MSSP) v3.70-03
MineSight Tools (MSTools) v1.50-4
MineSight Torque (MSTorque) v5.50
MineSight Geologic 1.2.2
MineSight Stope Optimizer 1.2.1
MineSight Sigma 1.1.3
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.13.0 – MineSight 2018 Release 1 – March 13, 2018
MS3D
➢ Auto Cut Generation Adds ability to use alpha values for the $count wildcard (MS3D-4533, CRDB-2103)
Improves stability (MS3D-15033, CRDB-7065, SCP-77676)
Improves visibility to ensure the option to use boundary polygons is available (MS3D-14642,
CRDB-6343, SCP-71330)
Fixes case where autoslicer was having difficulty cutting an solid with separate bodies within it
(MS3D-14960, CRDB-7065, SCP-77676)
➢ Autoslicer
Adds ability to target slice sizes to a reserves calculation (MS3D-14506)
Improves Autoslicer feature functionality to follow the direction of a polyline (MS3D-15490,
CRDB-7410, SCP-81289)
Fixes eradicate behaviour in autoslicer when slicing along a polyline tube (MS3D-14893, CRDB-
6941, SCP-79031, SCP-80552)
Fixes incorrect results that may occur with autoslicer slicing by grids (MS3D-14792, CRDB-6793,
SCP-75175, SCP-77422)
➢ CAD
Adds ability to add or create faces for an existing or new surface (MS3D-10477, CRDB-3228,
SCP-42703, SCP-54754)
➢ Calculate Volume Tool
Fixes incorrect volume calculations when slicing with a grid that is exactly co-planar with the
solids being calculated (MS3D-6301, CRDB-147, SCP-22505)
➢ Data Manager
Adds ability to find data in the datamanager (MS3D-14839)
Adds an apply to all for the skip, replace or create copy option when copying multiple objects
into a folder (MS3D-14035, CRDB-5469, SCP-62514)
Improves MS3D functionality by preventing an xviewer from automatically opening when a
viewer is opened if all viewers are originally closed (MS3D-15560)
Improves MS3D functionality by setting the default of the Data Manager auto-refresh to OFF
(MS3D-15342, CRDB-7377, SCP-80723)
Fixes DELETE hotkey so it works correctly in the datamanager (MS3D-14841)
➢ Documentation
Improves Proximity tool's documentation (MS3D-14152, CRDB-4655)
➢ Drillhole Design
Adjusts slicing algorithm so designed drillholes have a better chance of appearing in 2D for non-
orthogonal planes (MS3D-14575, CRDB-6646, SCP-74241)
Fixes to honor segment length and not to remove co-linear points from the result (MS3D-14919,
CRDB-2278)
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
➢ Drillholes
Adds ability to do variable substitution for naming points on export (MS3D-6088, CRDB-1318,
SCP-69758)
➢ Edit Grid
Adds new icon for new command under the Edit Grid Menu, Edit Grid Pulldown (MS3D-14796,
CRDB-3225, SCP-42701)
Adds the ability to snap the target to the camera plan to facilitate creating a 2D grid exactly were
you are digitizing in 3D (MS3D-12016, CRDB-3225, SCP-42701)
Fixes dynamic slicing with edit grid to be less rigid with non-orthogonal or snapped cases
(MS3D-14576, CRDB-6617, CRDB-7440, SCP-73821, SCP-81452, SCP-81657)
➢ General
Adds 'D' hotkey to disable mouse viewer rotation (MS3D-14104, CRDB-5957, SCP-67693)
Adds new Global Wireframe Mode Icon to MS3D (MS3D-14810)
Improves MineSight splash screen to default to last used project (MS3D-15050)
Improves memory usage in MS3D (MS3D-15023)
Fixes 'New Project ID' and 'Model File Name' inputs from Logic template files (MS3D-15558)
Fixes potential floating message window docking issues (MS3D-15329, CRDB-7360, SCP-
79690, SCP-82407)
➢ Grid Sets
Adds the ability to create gridsets based on mid-block elevations (MS3D-4807, CRDB-118)
Fixes flickering when using Select Origin from Viewer and adjusting the dialog (MS3D-11578)
Fixes grid set PCF selection to default to the MineSight project folder (MS3D-15003, CRDB-
6651, SCP-73484)
Fixes polyline direction to not reverse direction on a fence grid (MS3D-14187, CRDB-6248,
SCP-70427, SCP-78844)
➢ Import/Export
Adds ability to break an element based on a change in value in a column (MS3D-13307, CRDB-
1586, SCP-32488)
Adds option to export column headers (MS3D-14106, CRDB-5814, SCP-66156)
➢ Intersect Solids
Improves algorithm of getting optimized lines of Intersection in Surface Intersection tool or Solid
Intersector tool (MS3D-2069)
➢ Intersect Surfaces
Adds ability to generate cut solids when surfaces overlap via the Intersect Surface Tool (MS3D-
14577, CRDB-6613, SCP-73882)
Fixes "Verify Input Surfaces" option to know state "Verify surfaces are not solids and do not
contain folds in the given orientation" to better clarify its purpose (MS3D-14248, CRDB-3534,
SCP-45277)
Fixes incorrect results when generating a cut solid based on the data used (MS3D-14910,
CRDB-6965, SCP-76863)
➢ Large Gridded Objects (LGO)
Adds ability to use light bulbs to set visibility on grided surfaces in an LGO view (MS3D-11899)
Fixes clicking the visibility light bulb in LGO to immediately respond to a change in behaviour
(MS3D-14800)
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
➢ MSGrail
Fixes grail.engine.dtb module to correctly use the boundary survey code (MS3D-11792, CRDB-
4207, SCP-51206)
➢ Model Importer
Adds new functionality to Model Importer to put the actual used item list in the log for audit
purposes (MS3D-15368)
Fixes MS3D to keep correct items mapping when sorting the listed items by "short name" or "use
item" values (MS3D-15418, CRDB-7476, SCP-81830)
➢ Model Manager
Improves save button to only enable when there are pending edits (MS3D-12653)
Updates display to correctly show unit type (MS3D-14403)
Fixes disabled save button lacking an image (MS3D-14740)
Fixes display of save icon when working with GSF (MS3D-9954)
Fixes import from ASCII failing when the last line was blank (MS3D-9951)
Fixes incorrect clone and rename options for deleted models (MS3D-14434)
➢ Model Views
Adds ability to visually control the 3D display of the model view (MS3D-12857, CRDB-4890,
SCP-57696)
Adds block dimensions to the model view display info (MS3D-14756, CRDB-4771)
Adds new functionality to MS3D by having the PCF listed in the Info Tab within the Model View
Editor (MS3D-11967, CRDB-3884)
Fixes case when cloning a GSM with missing zbot/ztop and requests accurate data during clone
(MS3D-14931, CRDB-7031, SCP-77191)
➢ Object Properties
Improves object properties positioning on high resolution monitors (MS3D-10901)
Fixes face transparency to accept enter as confirmation (MS3D-10905)
➢ Pit Expansion
Adds functionality to undo last pit expansion without needing to navigate back to the expansion
tab (MS3D-14989)
Adds the ability to delete more than one parameter set at a time (MS3D-14381, CRDB-6150,
SCP-69248)
Fixes issues with history/parameters sets that can occur when copying and pasting pit
expansion objects (MS3D-14781, CRDB-6882, SCP-76087, SCP-80343)
➢ Query
Changes the cursor to help indicate that you are in query mode (MS3D-12652, CRDB-4823)
➢ Quick Model Stats (plugin)
Adds sorting of model items when selecting PCF items in Quick Model Stats (MS3D-15153,
CRDB-5311, SCP-61345)
➢ Ramp Builder
Adds a feature to MS3D allowing the user to generate ramps for shallow pits that do not require
a full pit design. This tool can be used to automatically design ramps to an existing pit design,
using a Toe and Crest geometry object (MS3D-14915)
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
➢ Ring Design
Fixes potentially invalid coordinates in the status bar when selecting a plan in the ring design
tool (MS3D-15191)
Fixes ring design to generate new reports in 2D viewer (MS3D-14486, CRDB-6287)
➢ Surface Reslope (plugin)
Renames 'Point Cloud' option in surface reslope to more accurately indicate we are generating
markers (MS3D-10578)
➢ Texture Surface
Adds ability to scroll to the most recently added file (MS3D-13593, CRDB-5743, SCP-65452)
Fixes texture tool to more accurately sort by filename instead of by path (MS3D-13593, CRDB-
5743, SCP-65452)
Fixes texture tool to no longer remove all your textures if you left it open while closing the
application (MS3D-14923)
Fixes texturing to properly rename a attributed surface if the previous attribute appeared to be a
textured surface (MS3D-14690, CRDB-6825, SCP-75259)
➢ Verify and Repair Surfaces and Solids
Fixes intablity in repair self intersecting faces (MS3D-14710)
➢ Viewer Properties
Improves MS3D functionality by allowing the Compass Rose and Compass Needle to show in
the regular viewer and the 2D Viewer, and the Three Axes option in both viewers (MS3D-15325,
CRDB-7380, SCP-80959)
➢ Virtual Reality
Adds ability to enable virtual reality for geological model (MS3D-15266)
➢ xViewer
Increases performance when rendering transparencies (MS3D-14838)
Fixes bad resizing on docked viewers when double clicking the title bar (MS3D-7409)
Fixes so that when you open an object it finds the default viewer and automatically launches it
(MS3D-11283)
➢ xViewer Properties
Adds ability to set a skybox in the xViewer (MS3D-14424)
Adds ability to synchronize the 3D Grid Box with the project settings (MS3D-13034, CRDB-4724,
SCP-55865, SCP-56188)
Improves MS3D functionality by making strike/dip symbols work for Three Axis type in the
xViewer Compass (MS3D-15555)
MineSight Haulage 7.3.1
Adds Equivalent Flat Haul to Haulage and MSSO Fixes issue with Stockpile to stockpile distances
Shows the lift capacity field inside Haulage
Fixes issue with export cycle times and profiles with no equipment sets
fixes issue with visibility in the open view
Fixes issue when cloning settings only
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
Model Interpolation Tool 1.60.3
fixed the OK button in Data Setup to function properly for GSM case with MSTorque input; fixed
to validate Seam Attribute after changing composite set name. allowed space to be used as a part of ellipse file name and sub-folder name in "Run One Block"
option.
enabled to enter "-1" for inverse distance power as a special option to average the results.
Model Calculation Tool 2.0.1
Fixed criteria filters for sub-blocked items.
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.4.3 – MineSight 2018 Release 1 - March 13, 2018
This version is compatible with MS3D v.12.60 or greater.
SMUG integration (ATLS-10424, ATLS-10425, ATLS-10426, ATLS-10445, ATLS-10446,
ATLS-10447, ATLS-10448, ATLS-10450)
Python Calc allows all modules (ATLS-10423)
Bug fixes (ATLS-10394, ATLS-10410, ATLS-10412, ATLS-10413, ATLS-10414, ATLS-
10417, ATLS-10419, ATLS-10421, ATLS-10383)
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.17.50 – MineSight 2018 Release 1 – March 13, 2018
➢ General
Updated documentation for variogram file format.
➢ Procedures
p50501.dat
Fixed issue where running p50501.dat was giving incorrect results.
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.3.40.1 – MineSight 2018 Release 1 – March 13, 2018
This version is compatible with MS3D v.12.0-5 and MSTorque v.5.40 or greater.
Fixed an issue when creating a blast pattern from a drill pattern. (CRDB-7686,
MSBLAST-3231)
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.3.30-06 – MineSight 2017 Release 6 – August 8, 2016
Updated to work with the latest version of MineSight Dynamic Unfolding (MSDA-3209)
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.4.00-06 – MineSight 2017 Release 1 – February 28, 2017
Improves performance of license check when using a commuted license. (MSEP-508)
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.4.2.0 – MineSight 2017 Release 5 – July 5, 2017
This version is compatible with MS3D v.12.0-5 or greater.
Simplified grades added for cycle time reporting (ATLS-10326)
Exposes destination states in Process Points (ATLS-10256)
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
V11.20 – MineSight 2018 Release 1 - March 13, 2018
Minimum Software Requirements
▪ MS3D 13.0 or higher
▪ MSAtlas/MSPlanner 2.4 or higher (optional)
▪ MSHaulage 7.3.1 or higher
▪ MSReserve 3.30.7
▪ ARC 4.11
EFH option added (MSSO-6448)
Adds stockpile balance report (MSSO-6118)
Multiple bug fixes
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.3.70-03 – MineSight 2016 Release 9 – December 8, 2016
Updated licensing software to support future enhancements.
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.1.50-4 - MineSight 2016 Release 4 – May 31, 2016
➢ Variogram.exe
Fixes variogram.exe to make the correct conversion when the Minor is longer than the Major and
the Major is longer than the Vertical (MS3D-12012, CRDB-3798).
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
v.5.50 – MineSight 2018 Release 1 – January 23, 2018
includes QAQC v1.2.1
➢ Requirements
MS3D 13.0 or later
Rock.Net 3.1.0 or later
MSDBM v 3.40 or later
➢ General
Added support to use MSTorque without installing Microsoft SQL Server. Two additional modes
have been added for this purpose. They are:
o LocalDB mode - Mainly for consultants and companies that do not need the full capabilities
of Microsoft SQL Server or have limited network access.
o Briefcase mode - Mainly for field geologist and engineers that would like to copy a subset of
data to their local machines, take it out to the field for modification and commit the changes to
a Master SQL Server. Briefcase mode is not supported for QAQC.
Note: Currently some client applications of Torque do not have the ease of use features to access a LocalDB or Briefcase project, namely Geologic and Blast.
Copyright© 2012 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc. December 19, 2017
1.2.2 – MineSight 2018 Release 1 – March 13, 2018
➢ Requirements
MS3D v13.0 or later
MSTorque 5.50 or later (Strongly Recommended)
MSDBM 3.40 or later (Strongly Recommended)
➢ Enhancements
Made the reporting of on-surface error statistics optional to reduce compute times. (GEOL-1246,
GEOL-1222)
Added better visual indicators and feedback for long running tasks. (GEOL-1242)
Added recording of telemetry data. (GEOL-1251)
➢ Bug Fixes
Fixed an issue in which enumerated sample attributes were not being loaded correctly from
Torque databases in some instances. (CRDB-7248, GEOL-1239)
Fixed an issue in which saved *.geol files were not correctly saving all data in some instances.
(CRDB-7445, GEOL-1248)
Fixed various minor user interface issues.
Copyright© 2013 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc.
December 19, 2017
1.2.1 – MineSight 2018 Release 1 - March 13, 2018
➢ Requirements
MS3D v12.60 or later
➢ General
Remove Stope Optimizer from MineSight 3D's "UG Eng Tools" menu if it is not on the client's
license. (CRDB-7666, STOPE-531)
Copyright© 2012 Mintec, inc. All Rights Reserved | MineSight® is a registered trademark of Mintec, Inc. December 19, 2017
1.1.3 – MineSight 2018 Release 1 – March 13, 2018
➢ Requirements
MS3D v12.50 or later
➢ Highlights
Added telemetry.
Added support for overlaying CPPs with Logarithmic scale or Normal distribution axis.