The innovative PW5L generation
-
Upload
galici2002 -
Category
Documents
-
view
219 -
download
0
Transcript of The innovative PW5L generation
-
7/29/2019 The innovative PW5L generation
1/2
Th
einnovativ
ePW5Lgen
erationThe innovative PW5L generation
for equipotential bonding on enamelled pipelinesby means of a two-hole earthing strap
Gaskets Packings Expansion Joints Rubber and Plastic Parts
In the chemicals and processing industry the occurrence of
static electricity in enamelled pipelines has been a long
known problem.
Pipeline systems, in which highly inflammable liquids such
as e.g. ether, benzine, dioxan, toluol, xylene or correspond-
ing media are transported, can - if there is insufficient
earthing - be statically charged to such an extent that
ignitable discharges occur.
As result of using a corrugated ring with earth lead strap-
joint and layers of asbestos free fiber material or laminatedgraphite as inlayer for PTFE-enveloped gaskets a potential
drop achieves. Therefore occurrence of electrifying dis-
charges are avoided.
Earthing the gasket is usually done by means of an earth
cable which is attached to the earthing strap (figure1).This time and material-consuming type of earthing is
avoided by using our gasket with the new two-hole
earthing strap-joint (figure2).
You save material:
q Earthing cable
q Cable-connecting eyes
q Bolts
q Nuts
q Plain washers
q Spring washers
q Earthing clips (for pipe length more than 500mm)
You save time:
q For assembling of all the components listed above.Depending on the accessibility of the assembly location
a time requirement of between 5 up to 8 minutes is
assumed.
The gasket profile PW5, on which the PW5L profile is
based, has been proved because of its high chemical
resistance as well as on account of its excellent sealing
properties at changing pressures and temperatures be-
tween -195C up to +250C in practice. Enamelled flanges
can be just reliable connected to each other by means of the
PTFE-enveloped PW5L gasket profile as also other stress-
susceptible sealing surfaces. The corrugated ring, which is
located in the area of the sealing surface, improves the
elastic properties of this compound sealing ring.
The PTFE-enveloped gasket profile PW5L consists of anenvelope, made of modified PTFE of type Hostaflon TFM
1600, 0.5 mm thick. The inner diameter has a 3 mm
diffusion prevention width. A corrugated ring, made of 0.5
mm 1.4571, with middle ending flat finish on the inside in
accordance with the recommendation of the working groupGaskets in chemical Plants of the chemical big industry,
serves as an insert. The corrugated ring is equipped with
the new two-hole earthing strap. Two 2 mm thick soft
material gaskets serve as layers for the corrugated ring.
The profile PW5L is made with the inner and outer diam-
eters according to DIN 2690 with a total thickness of about
6.5 mm.
Materials
Surface pressure 25
limits for 20 C 80Surface pressure 30
limits for 250 C 60
v
v
N/mm2
N/mm2
PTFE1.4571
Soft material
figure 1: old version figure 2: new version
-
7/29/2019 The innovative PW5L generation
2/2
Th
einnovativ
ePW5Lgen
eration
Gaskets Packings Expansion Joints Rubber and Plastic Parts153e/01990001
kempchen & Co. GmbH
Alleestr.4 D-46049 Oberhausen
Tel.: ++49 208 8482-0 Fax ++49 208 8482-285
E-mail: [email protected]
URL: www.kempchen.de
A
6,
5
0,
5
0,
5
3,0 View A
old version new version profile PW5L
steel enamelled pipe
steel enamelled pipe
SS tanged shim
Bolt
Conventional corrugated ring New corrugated ring
Loose flange Loose flange
steel enamelled pipe
SS tanged shim
Bolt
Serrated lockwasher DIN6798
Loose flange
Conventional corrugated ring
Earthing cable
Serrated lockwasher DIN6798
Nut
SS tanged shim
Serrated lockwasher DIN6798
Loose flange
New corrugated ring
Serrated lockwasher DIN6798
Nut
SS tanged shim
steel enamelled pipe
PTFE-enveloped gasket profile PW5L
as described overleaf:
Envelope: PTFE-TFM 1600 spherically turned, with
diffusion prevention,
according to FDA 21 CFR 177.1550
Inserts: Graphite laminate
Corrugated ring: Material 1.4571 with a two-hole earthing
strap
Dimension: according to DIN 2690, total thicknessabout 6.5 mm
Packing unit: 10 pieces
PTFE-enveloped gasket profile PW5L
as described overleaf:
Envelope: PTFE-TFM 1600 spherically turned, with
diffusion prevention,
according to FDA 21 CFR 177.1550
Inserts: asbestos free fiber material
Corrugated ring: Material 1.4571 with a two-hole earthing
strap
Dimension: according to DIN 2690, total thicknessabout 6.5 mm
Packing unit: 10 pieces
All information and technical descriptions contained in this brochure correspond to our state of knowledge at the time of the printing. They are intended as information about our products and their various applications.
Therefore, we will only guarantee certain attributes described in the brochure or the suitability for actual intended purposes according to a written express warranty in the actual individual case. Any industrial proprietary rights must be observed. Orders will only be accepted and completed under our standard terms and conditions, which we will make available on request.