TGO_T02_Files_to_RINEX.pdf April 22, 2010

Pacific Northwest Technology Leaders in Survey, Mapping, and Construction Solutions

www.geoline.com 800.523.6408

Trimble Geomatics Office / .T02 Files / RINEX

This document covers the proper steps to importing .T02 files into Trimble Geomatics Office v1.6x and

properly converting .T02 files to RINEX.

Trimble Configuration Utility Setup:

• Open the Trimble Configuration Utility

• Open the Tool menu

• Select Options

• Verify that RINEX v2.10 is set for the Default

Format

• Click Apply

• Click OK

User Note: This document is written under the assumption that your .T02 files are saved to your PC

and you have the proper data transfer utility, antenna.ini file (Trimble Configuration Utility) and

Convert to RINEX v2.0.0.9 or higher.

The following links are provided in the case you don’t have both the Data Transfer Utility and the

Trimble Configuration Utility…

• Trimble Data Transfer Utility: http://trimble.com/datatransfer.shtml

• Convert to RINEX and Trimble Configuration Utility: http://trimble.com/trimblerinex_ts.asp

TGO_T02_Files_to_RINEX.pdf April 22, 2010

Pacific Northwest Technology Leaders in Survey, Mapping, and Construction Solutions

www.geoline.com 800.523.6408

.T02 to RINEX file Conversion: Once the Trimble Configuration Utility is setup properly you are

now ready to begin the .T02 file conversion…

• Open the File menu

• Select Open

• Navigate to your .T02 file

and select it

• Click Open

• Verify the RINEX version is

v2.10

• Open the File menu

• Select Convert files

User Note: Once converted,

you will see the message

SUCCESS! located at the

bottom of the Convert to

RINEX window… Your .T02 files

are now ready for OPUS

and/or importing into Trimble

Geomatics Office.

TGO_T02_Files_to_RINEX.pdf April 22, 2010

Pacific Northwest Technology Leaders in Survey, Mapping, and Construction Solutions

www.geoline.com 800.523.6408

Importing into Trimble Geomatics Office: Once the .T02 file has been successfully converted,

you can now import the file into Trimble Geomatics Office…

• Open Trimble Geomatics Office

• Create a new Project

• Select the Import tab

• Select RINEX

• Navigate to your file

• Select it and Click Open

User Notes: The following are examples of an imported RINEX file and Baseline Processing