USERS MANUAL CORDLESS HEADPHONES Model: RS 2080

Cordless Headphones Thank you for choosing to purchase one of our TEVION products, we appreciate your business and believe that we have provided you with a product that is both reliable and value for money. We encourage you and your friends to choose from our range of TEVION products again in future. PACKAGE CONTENTS 1 x RF Transmitter (Charging Cradle) 1 x RF Receiver (Headphones) 1 x AC/DC Power Adaptor 1 x 3.5mm to 3.5mm Connection Cable 1 x Stereo RCA to 3.5mm Adaptor Cable 1 x 3.5mm to 6.35mm Adaptor Plug 2 x 800mAh AAA Rechargeable Ni-mH Batteries 1 x Instruction Manual Confirm all items are present before disposing of carton.

For any customer query or in the unlikely event of a product failure, please phone or

email the helpline contact details below for assistance.

DO NOT RETURN THE PRODUCT TO THE RETAILER.

Toll Free Help line: 1300 366 144 Email: info@telefixsales.com.au

1

SAFETY INSTRUCTIONS Carefully read this manual before using this equipment. Make sure that you know how these TEVION Cordless Headphones function and how to operate them. Maintain the equipment in accordance with the instructions to ensure that it functions properly. Keep this manual with the equipment. If the equipment is to be used by a third party, this instruction manual must be supplied with it. The safety instructions, by themselves, do not eliminate danger completely, and proper accident prevention measures must always be used. BEFORE INITIAL USE Remove all packaging. For safety do not immerse any part of the cordless headphone or power adaptor in water or any other liquid. Check for any damage that may have occurred during transit. Do not use if the equipment is damaged in any way or if the adaptor or supply cord is damaged. Contact the service details at the beginning of this manual for assistance.

OPERATION This TEVION Cordless Stereo Headphone System has been designed for general home use only. It is not designed for commercial or industrial use. Simply connect the transmitter to any audio device such as a DVD Player, CD Player, Television Receiver, VCR or Hi-Fi System. Initial Set-Up Unwind the AC power pack lead fully and plug the power pack into a suitable electrical wall socket, 230-240V ~ AC. Plug the AC power pack DC output supply plug into the DC input socket on the rear of the transmitter (Charging Cradle). Remove the ear cushion holder on the receiver headphones by carefully pulling directly outwards from the headset to access the battery compartment. See Fig: 1.1 on the opposite page for the diagram. This cover simply clips into the headset by way of four clips. Install one rechargeable LR03/AAA battery into each headphone unit; taking note that only rechargeable batteries may be used and also taking note of the battery installation instruction details inside. Refit the cushion cover by carefully clipping back into place.

2

Fig: 1.1

Switch the power ON at the wall. Set the headphones to the ‘OFF’ position (Right Headset ‘POWER’ Button) while charging. Place the Cordless Headphones onto the Charging Cradle, making sure that the charging contacts on the Charging Cradle and Cordless Headphones align correctly. The ‘GREEN’ charge lamp will glow indicating that the batteries are being charged. Leave on charge for 24 hours before initial use to ensure batteries are at full charge. When charging is complete, your Cordless Headphones are ready for use. Connect the 3.5mm to 3.5mm to 3.5mm Audio Connection Cable (long lead) into a suitable audio output jack (use one of the supplied adaptors if required). Ensure that the transmitter (Charging Cradle) has an input signal from the audio source. The red ‘POWER’ light will glow when the power is connected and a suitable audio signal is received. If the red ‘POWER’ light does not illuminate, ensure that the transmitter is receiving a signal from the audio source (TV, Stereo, etc.). Use Turn the audio source (e.g. TV, Stereo, etc.) ‘ON’. Remove the Cordless Headphones from the Charging Cradle. Turn the headset ‘ON’ by pressing the ‘POWER’ button located on the right headset. The red ‘ON’ indicator will glow. Adjust the volume level to a low level at first on the audio source equipment (TV, Stereo, etc.). Place the Cordless Headphones carefully on your head over the ears. Adjust the volume on the Cordless Headphones by adjusting the volume dial on the rear of the left headset. If you cannot receive the sound system press the ‘AUTO SCAN’ button located on the left headset to tune to the input signal to the desired channel. If you fail to receive the sound source change the channel setting on the rear of the Transmitter (Charging Cradle) and try again. NOTE: To protect the transmitter and save power, the transmitter automatically switches OFF after approximately one minute should the signal source fail. Recharging When you have finished listening, turn the Cordless Headphones off using the ‘POWER’ button located on the right headset. Place the Cordless Headphones back onto the Charging Cradle to recharge the batteries before storing or reuse. Make sure that the ‘GREEN’ charge lamp is illuminated.

3

PARTS DESCRIPTION 6

2 1 12/13/14 3/4 5 7 8 11 15/16/17 1 – RF Transmitter (Charging Cradle) 2 – RF Receiver (Cordless Headphones) 3 – Power ON/OFF Button 4 – Power ON Indicator 5 – Charge Contacts 6 – 12.5V AC Adaptor 7 – 3.5mm to 6.35mm adaptor plug 8 – 3.5mm to RCA Socket Adaptor 9 – Power ON Light 10 – Charge ON Light 11 – 3.5mm to 3.5mm Audio Connecting Lead 12 – Volume Control 13 – Auto Scan Indicator 14 – Auto Scan Button 15 – Channel selector 16 – DC Input 17 – Audio Input

4

ELECTRICAL SAFETY When using electric equipment always observe safety regulations where applicable to reduce the risk of fire, electric shock and personal injury. Always check that the power supply corresponds to the voltage on the rating plate. Supply cord and plug. Always fully unwind any cord to avoid overheating. Never allow any supply cord to come in contact with hot objects. Do not carry the equipment by the cord. Disconnect by first switching off the mains outlet, grasping the adaptor and pulling it out gently. If the adaptor or adaptor supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. Only use authorised replacement parts. Children. Caution. Keep out of reach of children. This appliance is not intended for use by young children or infirm persons without supervision. Young children must be supervised to ensure that they do not play with the equipment. Water. For your safety do not immerse any part of this equipment in water. Do not use with wet hands or use in damp situations Handling. Do not drop the product as this may cause damage or damage internal components. Do not use this equipment if it has been damaged in any way, immersed in water, the adaptor or supply cord is damaged or the operation is faulty. Contact with any damaged equipment could result in electric shock. Batteries. Only use the rechargeable batteries as supplied. If the supplied batteries come to the end of their useful life, replace these with new AAA Ni-mH Rechargeable Batteries with a mAh rating between 500mAh and 1000mAh. If unsure about the batteries to be used, seek professional advice. WARNING: Never attempt to charge dry-cell non-rechargeable batteries, as this may cause damage to yourself and this equipment.

5

GENERAL SAFETY When using electric equipment basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before attempting to use the equipment. Consider the environment. Do not use in damp or wet conditions. Do not use without adequate light. Do not use near flammable or hazardous materials. Care must be taken when using headphones outdoors to avoid possible water damage.

Keep children away. This appliance is not intended for use by young children or infirm persons without supervision. Young children must be supervised to ensure that they do not play with the equipment. Damaged or dropped. Always inspect your electrical equipment before use. Do not use this equipment if it has been damaged, dropped, left outdoors or dropped in water. Return it to an authorised service dealer for examination and repair. Do not attempt to service this equipment yourself. Refer servicing to qualified service personnel. Store in a safe place When not in use store your cordless headphone and all the accessories and instruction manual in a safe and dry place. Liability. No liability can be accepted for any damage or personal injury caused by non-compliance with these instructions or any other improper use or mishandling. This equipment is intended for household use only. CARE AND CLEANING Before cleaning. When not in use or before cleaning, always disconnect from the mains supply. Cleaning guide. Regularly clean the outside of the equipment with a soft damp cloth and dry it with a dry towel. Do not immerse in water. Do not use harsh solvents to clean the plastic components.

6

TROUBLE SHOOTING NO SOUND: - Ensure that the AC power pack is correctly inserted into the AC wall outlet and that it is on. - Ensure that the Cordless Headphones’ POWER switch is set to the ON position. - The Cordless Headphone batteries may be low, see recharging instructions (page 2 and 3). - Adjust the volume control dial on the headphones to turn up the volume. - Check the audio source that is supplying the signal for transmission (Is it “playing”). DISTORTED: - Ensure that the GREEN stereo indicator light is illuminated on the left headset of the Cordless Headphones. - Change the position of the Channel Selector control located on the rear of the transmitter. Retune the Cordless Headphones by pressing the AUTO SCAN button to re-establish a clear connection. - The headphone batteries may be too low, turn off the headphones; recharge or replace the batteries and then switch the headphone back to the ON position using the POWER button on the right headset. - The headphones may be too far away from the transmitter. - The input signal from the audio source (TV, Stereo, etc.) may be too low, increase the output volume of the source device if possible and retry.

7

TECHNICAL SPECIFICATIONS

8

Warranty Card

This product is guaranteed against faulty materials and workmanship for a period of twelve months from the date of purchase. This warranty becomes void if the product has been tampered with, damaged by accident, damaged

in any other way by improper use or has been purchased second hand. All production orders have quality inspections.

For any customer query or in the unlikely event of a product failure, please phone or

email the helpline contact details below for assistance.

DO NOT RETURN THE PRODUCT TO THE RETAILER.

WARRANTY FOR APPLIANCES USED COMMERCIALLY LIMITED TO 90 DAYS Product: ______________________________________________________ Model No.: _____________________________________ Purchase Date:_________ Product Purchased From: ________________________________________________ _________________________________________________________________________ Your Name: _____________________________________________________________ Address: ________________________________________________________________ ______________________________________________ Phone Number: __________ IMPORTANT! Please retain this warranty card along with your purchase receipt. Please do not post to the retailer

Toll Free Help line: 1300 366 144 Email: info@telefixsales.com.au

Supply Voltage Carrier Frequency Operating Voltage Frequency Response Distortion Signal to Noise Ratio Channel Separation Range

230-240V ~ AC 50 Hz Ch 1: 924.23 – 924.27 MHz Ch 2: 924.73 – 924.77 MHz Ch 3: 925.23 – 925.27MHz Transmitter: 12.5V 150Ma Receiver: 2.4V 7hz-10KHz <2% >50Db 30Db 50 Meters (Open area)