Stropkov, Slovakia

Stropkov

Basic information

Address: Hviezdoslavova 37/46, 091 12 Stropkov, Slovakia

Website: www.tesla.sk

Email: sales@tesla.skmarketing@tesla.sk

GPS: Latitude 49° 12' 9.43"N 49.20261910Longitude 21° 39' 6.57"E 21.65182450

Number of employees: 790 Company area: 127.575 m2- production: 475 - buildings: 30.552 m2- tooling shop: 75 - manufacture: 17.581 m2- R&D: 20 - logistic: 7.155 m2- quality: 29

From the history

1960

19911994

1996200120072018

- establishment of TESLA STROPKOV(as a plant of concern TESLA Investment Electronics)

- change to joint-stock company- privatisation of TESLA

(100% shares owned by Top management of TESLA)- certification of Quality Control System according to ISO 9001- certification of Quality Control system according to ISO/TS 16949- certification of Quality Control System according to ISO 14001- Certification of Quality Control System according to IATF 16949

Certificates

Electronic products(audio and video house communication systems, home phones)

Electronic products(special telephones)

Electric products(switches, sockets)

Metal products(door locks, hinges)

Automotive

Automotive

- application: parking assistance (sensors)

Automotive(piezoceramic discs)

TechnologyPlastic

- injection machines with clamping force from 20 to 800 tons- Engel (hydraulic), Mitsubishi (electric)- Hurmak (Hot Melt – low pressure injection)

Injectionmachines(< 200 T)

Brand Clamping force Number

HURMAKENGEL

2028

1 (vertical)1

ENGEL 50 4MITSUBISHI 50 2ENGEL 60 1 (vertical)ENGEL 80 11ENGEL 90 4ENGEL 110 11ENGEL 120 6ENGELENGELENGELMITSUBISHI

130140150180

1121

TechnologyPlastic

Brand Clamping force Number

ENGEL 200 5ENGEL 260 8MITSUBISHI 350 1ENGEL 400 5MITSUBISHI 450 1ENGEL 600 1ENGEL 750 1ENGEL 800 1

TechnologyPlastic

Injectionmachines(≥ 200 T)

TechnologyPainting of the plastics

Three independent workstations dedicated for applying of three different surfacecoatings: primer paint, colour paint and transparent top paint.Each workstation consists of an independent booth with a manual spray gun, anoutflow booth for pre-drying and an independent drying oven.The air-conditioned areas for painting are designed as independent units for thepreparation of parts and their painting.

TechnologyMetal

- stamping, bending, punching, drawing of materials with thickness 0,1 mm to 4 mm on machines with clamping force from 6,3 to 160 tons

- stamping machine EUROMAC MTX 1250/30 CNC - 2000- turning (diameter 2mm to 20 mm) on automatic lathes- electroplating (zinc, nickel, tin)- powder coating- tampo print- screen print

Stampingmachines

Brand Clampingforce Shifts per min. Number

PASU 40 40 500 1PASU 63 63 360 1PASU 16 16 630 1LENR 6,3 6,3 160 2LEN 10C 10 160 5LEN 25C 25 155 8LENP 25 25 60 5LENR 25 25 60 2

LENR 40A 40 60 3LEN 40C 40 140 8

TechnologyMetal

Brand Clampingforce Shifts per min. Number

LEN 63C 63 130 3LENP 63 63 45 3

LEU 100A 100 125 1LEXN 100C 100 150 2

ALO 25 25 110 5TALO 30 30 100 1TALO 20 20 120 2LEK 160

EUROMAC MTX 1250/30

16030

50–

11

TechnologyMetal

Stampingmachines

TechnologyAssembly of PCBs (SMT & manual)

TechnologyPiezoceramic

- 1989: license from Japanese company

- piezo production focused on piezoceramic converters and ringers assubstitution for previous telephone inserts and electromechanical buzzers

TechnologyPiezoceramic

- development and production of piezoceramic discs, quadrate plates, membranes with various diameters, piezoceramic converters and ringers

- mass production of thin piezoceramic elements with various electrodeconfiguration (according to customer request)

TechnologyPiezoceramic

R&D department

- development of mechanical parts and products

- development of electric and electronicproducts

- production of samples and prototypes

- testing in internal laboratory

- ProEngineer (CREO) and CATIA

Tooling shopDesign and production of:

- injection moulds- stamping tools- moulds for zinc & alluminium castings- assembly lines & gauges- testing lines & fixtures- maintenance & repair- tool modifications & spare parts- 3D measurement

Tooling shop

- maximum size of injection mould: 900 x 700 x 500 mm

CNC:AGIE TRON 100cAGIE MONDOSTAR 20, 50 EXERON 312, 313 MFROBOFORM 30CHARMILEZEDM punching:EMD SD1Wire cutting:AGIE CUT Classic, EIR 005 (3x)FANUCTurning:RC 80 TOS, TOS TT SV18RA (5x)

Tooling shopMilling:Tool centre HURON KX 8 SP (with HAIDENHAIN 530)Tool centre LAGUN LEANGraphite milling machine AZKGrinding:MIKROMAT 6SPS BPH 20 NA (8x)PS BPH 40 BPS BPH 320 (3x)TOS UDWelding:ALM 200 digital (laser)MICROTEC MT 1500S (cold welding)Mould polishing: by grinding stone or polishing paste

Assembly & testing lines

Customers(automotive)

Customers(non automotive)

Sales

Sales 2015: 22,6 mil. EUR

Sales 2016: 23,9 mil. EUR

Sales 2017: 27,6 mil. EUR

Sales 2018: 28,5 mil. EUR

Sales 2019: 28,2 mil. EUR

Plan 2020: 26,3 mil. EUR

Sales 2019:

- automotive 63,1 %

- other plastic parts 14,0 %

- house communication 7,4 %

- switches & sockets 3,7 %

- special telephones 2,8 %

Export 2019: 68 %

Competences

- ISO 9001, IATF 16949, ISO 14001 certificates

- years of experience with development and production of various plasticand metal parts, as well as electric and electronic products

- internal R&D department

- internal tooling shop

- all activities „under one roof“: marketing, R&D, tooling, production(plastic, metal, assembly), logistics, sales and service