TEEJET NOZZLE BODIES & COMPONENTS · customer. TeeJet vari-spacing clamps AA111-* can be used. See...

4
QUICK TEEJET NOZZLE BODIES & COMPONENTS TEEJET NOZZLE BODIES & COMPONENTS Single Nozzle Bodies for Dry Booms QJ100 Series Quick TeeJet Nozzle Body • Hose barb sizes for 3/8”, 1/2” or 3/4” I.D. Hose • Maximum operating pressure of 125 PSI QJ200 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies • Available with single, double or triple hose shanks for 3/8”, 1/2” and 3/4” I.D. Hose • Drip-free shutoff with TeeJet ChemSaver. Opens at 10 PSI. Standard diaphragm is EPDM with Viton optional. • Maximum operating pressure of 125 PSI. QJ300 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies • Low-profile design allow maximum protection against damage. • Available with single and double hose shanks for 3/8”, 1/2” and 3/4” I.D. hose. • Drip-free shutoff with TeeJet ChemSaver. Opens at 10 PSI. Standard diaphragm is EPDM with Viton optional. • Maximum operating pressure of 300 PSI. To Fit Part Number Hose I.D. Price Single 18635111-406NYB 3/8” $5.36 18638111-540NYB 1/2” $5.36 18719111-785NYB 3/4” $5.36 Double 18636112-406NYB 3/8” $5.36 18639112-540NYB 1/2” $5.36 18720112-785NYB 3/4” $5.36 Triple 18637113-406NYB 3/8” $5.36 18640113-540NYB 1/2” $5.36 18721113-785NYB 3/4” $5.36 To Fit Part Number Hose I.D. Price Single 19349211-406NYB 3/8” $13.26 19349211-540NYB 1/2” $13.26 19349211-785NYB 3/4” $13.26 Double 19350212-406NYB 3/8” $13.26 19350212-540NYB 1/2” $13.26 19350212-785NYB 3/4” $13.26 Triple 19351213-406NYB 3/8” $13.26 19351213-540NYB 1/2” $13.26 19351213-785NYB 3/4” $13.26 QJ100 Series Quick TeeJet Nozzle Body • Use with Quick TeeJet Caps. • Hose shanks available in double or single (left or right) for 1/2” hose I.D. • TeeJet ChemSaver drip-free shutoff. • Made of corrosion-resistant materials. • Maximum operating pressure of 300 PSI. • QJ39684 uses Nylon nut instead of brass nut. QJ39685-1R-500-NYB QJ39685-1L-500-NYB QJ39685-2-500-NYB All Sizes - $8.97 Vari-Spacing Clamps for Use on Dry Boom Quick TeeJet Bodies Measure the inside diameter of round pipe for the proper size. For square clamps measure the outside diameter. Part# To Clamp On Price QJ111-1/2 1/2” Pipe $3.54 QJ111-3/4 3/4” Pipe $3.54 QJ111-1 1’ Pipe $3.54 QJ111-1-1/4 1 1/4” Pipe $3.54 QJ111HP-3/4 3/4” Pipe $13.64 QJ111SQ-3/4 3/4” Square Tubing $3.54 QJ111SQ-1 1” Square Tubing $3.54 QJ111SQ-1-1/4 1 1/4” Square Tubing $3.54 QJ111SQ-1-1/2 1 1/2” Square Tubing $3.54 QJ111SQ-*-304SS Stainless Steel Clamp. Available to fit $7.82 3/4”, 1 1/4” & 1 1/2’ Square Tubing QJ111SQ QJ111 QJ111HP To Fit Part Number Hose I.D. Price Single 22251311-375NYB 3/8” $10.96 22251311-500NYB 1/2” $10.96 22251311-750NYB 3/4” $10.96 Double 22252312-375NYB 3/8” $10.96 22252312-500NYB 1/2” $10.96 22252312-750NYB 3/4” $10.96 Part # For Use With TeeJet Nozzle Body List Price 115880-1-12-05 12 V/QJ17560A, QJ360E, $261.10 QJ200, QJ300, 24216A, 24230A, QJ39685, QJ(T)8360 115880-2-12-05 12 V/QJ360C, QJ360F, QJ370 $261.10 QJ22187, QJ8355, 8355 98552-05 2 Wire, 0.5M Metri-Pack Cable $20.20 98552-15 2 Wire, 1.5M Metri-Pack Cable $26.03 98552-30 2 Wire, 3.0M Metri-Pack Cable $33.90 The 115880 e-ChemSaver is a solenoid actuated shutoff compatible with a wide range of TeeJet nozzle bodies equipped with a diaphragm check valve. It can be used for end of boom nozzles as well as individual tip shutoff and PWM controls. * Solenoids come standard with 0.5M Cable 115880 e-ChemSaver® Electric Solenoid Shutoff L I S T P R I C E C A T A L O G P L E A S E A P P L Y D I S C O U N T SPRAYER SPECIALTIES Grimes, IA 800-351-1587 Gardner, KS 877-829-8502 Brimfield, IL 855-778-8500 36 36

Transcript of TEEJET NOZZLE BODIES & COMPONENTS · customer. TeeJet vari-spacing clamps AA111-* can be used. See...

Page 1: TEEJET NOZZLE BODIES & COMPONENTS · customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information. QJ300 Series Diaphragm n Check Valve Quick TeeJet

QUICK TEEJET NOZZLE BODIES & COMPONENTSQUICK TEEJET NOZZLE BODIES & COMPONENTSTE

EJET

NO

ZZ

LE B

OD

IES

& C

OM

PO

NEN

TS

Single Nozzle Bodies for Dry Booms

QJ100 Series Quick TeeJet Nozzle Body• Hose barb sizes for 3/8”, 1/2” or 3/4” I.D. Hose• Maximum operating pressure of 125 PSI

QJ200 Series Diaphragm Check Valve Quick TeeJetNozzle Assemblies• Available with single, double or triple hose shanks for 3/8”, 1/2” and 3/4” I.D. Hose• Drip-free shutoff with TeeJet ChemSaver. Opens at 10 PSI. Standard diaphragm is EPDM with Viton optional.• Maximum operating pressure of 125 PSI.

QJ300 Series Diaphragm Check Valve Quick TeeJetNozzle Assemblies• Low-profile design allow maximum protection against damage.• Available with single and double hose shanks for 3/8”, 1/2” and 3/4” I.D. hose.• Drip-free shutoff with TeeJet ChemSaver. Opens at 10 PSI. Standard diaphragm is EPDM with Viton optional.• Maximum operating pressure of 300 PSI.

To Fit Part Number Hose I.D. PriceSingle18635111-406NYB 3/8” $5.3618638111-540NYB 1/2” $5.3618719111-785NYB 3/4” $5.36

Double18636112-406NYB 3/8” $5.3618639112-540NYB 1/2” $5.3618720112-785NYB 3/4” $5.36

Triple18637113-406NYB 3/8” $5.3618640113-540NYB 1/2” $5.3618721113-785NYB 3/4” $5.36

To FitPart Number Hose I.D. PriceSingle19349211-406NYB 3/8” $13.2619349211-540NYB 1/2” $13.2619349211-785NYB 3/4” $13.26

Double19350212-406NYB 3/8” $13.2619350212-540NYB 1/2” $13.2619350212-785NYB 3/4” $13.26

Triple19351213-406NYB 3/8” $13.2619351213-540NYB 1/2” $13.2619351213-785NYB 3/4” $13.26

57

22252-312-375-NYB

22252-312-500-NYB

22252-312-750-NYB

22251-311-375-NYB

22251-311-500-NYB

22251-311-750-NYB

19351-213-406-NYB

19351-213-540-NYB

19351-213-785-NYB

19350-212-406-NYB

19350-212-540-NYB

19350-212-785-NYB

19349-211-406-NYB

19349-211-540-NYB

19349-211-785-NYB

18637-113-406-NYB

18640-113-540-NYB

18721-113-785-NYB

18636-112-406-NYB

18639-112-540-NYB

18720-112-785-NYB

18635-111-406-NYB

18638-111-540-NYB

18719-111-785-NYB

Double QJ39685-2-500-NYB

Single Right QJ39685-1R-500-NYB

Single Left QJ39685-1L-500-NYB

QJ39685 Series Quick TeeJet Nozzle BodyFeatures:n Use with Quick TeeJet caps.

n Hose shanks available in double or single (left or right) for 1/29 hose I.D.

n TeeJet ChemSaver drip-free shutoff.

n Made of corrosion-resistant materials.

n Maximum operating pressure of 300 PSI (20 bar).

n QJ39684 uses Nylon nut instead of brass nut.

Note: Support is normally supplied by the customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information.

QJ300 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies n Low-profile design allows maximum

protection against damage.n Available with single and double hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton optional.

n Maximum operating pressure of 300 PSI (20 bar).

QJ300 Series is also available in polypropylene. Maximum operating pressure is 150 PSI (10 bar).

QJ200 Series Diaphragm Check Valve Quick TeeJet Nozzle Assembliesn Available with single, double or triple hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver®.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton® optional.

n Maximum operating pressure of 125 PSI (9 bar).

QJ100 Series Quick TeeJet Nozzle Bodyn Hose barb sizes for 3/89, 1/29

or 3/49 I.D. hose.n Maximum operating pressure

of 125 PSI (9 bar).

Note: See page 54 for vari-spacing clamps. See page 63 for Quick TeeJet caps.

Single Nozzle Bodies for Dry Booms

BOOM COMPONENTS

ENGLISH

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

57

22252-312-375-NYB

22252-312-500-NYB

22252-312-750-NYB

22251-311-375-NYB

22251-311-500-NYB

22251-311-750-NYB

19351-213-406-NYB

19351-213-540-NYB

19351-213-785-NYB

19350-212-406-NYB

19350-212-540-NYB

19350-212-785-NYB

19349-211-406-NYB

19349-211-540-NYB

19349-211-785-NYB

18637-113-406-NYB

18640-113-540-NYB

18721-113-785-NYB

18636-112-406-NYB

18639-112-540-NYB

18720-112-785-NYB

18635-111-406-NYB

18638-111-540-NYB

18719-111-785-NYB

Double QJ39685-2-500-NYB

Single Right QJ39685-1R-500-NYB

Single Left QJ39685-1L-500-NYB

QJ39685 Series Quick TeeJet Nozzle BodyFeatures:n Use with Quick TeeJet caps.

n Hose shanks available in double or single (left or right) for 1/29 hose I.D.

n TeeJet ChemSaver drip-free shutoff.

n Made of corrosion-resistant materials.

n Maximum operating pressure of 300 PSI (20 bar).

n QJ39684 uses Nylon nut instead of brass nut.

Note: Support is normally supplied by the customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information.

QJ300 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies n Low-profile design allows maximum

protection against damage.n Available with single and double hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton optional.

n Maximum operating pressure of 300 PSI (20 bar).

QJ300 Series is also available in polypropylene. Maximum operating pressure is 150 PSI (10 bar).

QJ200 Series Diaphragm Check Valve Quick TeeJet Nozzle Assembliesn Available with single, double or triple hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver®.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton® optional.

n Maximum operating pressure of 125 PSI (9 bar).

QJ100 Series Quick TeeJet Nozzle Bodyn Hose barb sizes for 3/89, 1/29

or 3/49 I.D. hose.n Maximum operating pressure

of 125 PSI (9 bar).

Note: See page 54 for vari-spacing clamps. See page 63 for Quick TeeJet caps.

Single Nozzle Bodies for Dry Booms

BOOM COMPONENTS

ENGLISH

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

57

22252-312-375-NYB

22252-312-500-NYB

22252-312-750-NYB

22251-311-375-NYB

22251-311-500-NYB

22251-311-750-NYB

19351-213-406-NYB

19351-213-540-NYB

19351-213-785-NYB

19350-212-406-NYB

19350-212-540-NYB

19350-212-785-NYB

19349-211-406-NYB

19349-211-540-NYB

19349-211-785-NYB

18637-113-406-NYB

18640-113-540-NYB

18721-113-785-NYB

18636-112-406-NYB

18639-112-540-NYB

18720-112-785-NYB

18635-111-406-NYB

18638-111-540-NYB

18719-111-785-NYB

Double QJ39685-2-500-NYB

Single Right QJ39685-1R-500-NYB

Single Left QJ39685-1L-500-NYB

QJ39685 Series Quick TeeJet Nozzle BodyFeatures:n Use with Quick TeeJet caps.

n Hose shanks available in double or single (left or right) for 1/29 hose I.D.

n TeeJet ChemSaver drip-free shutoff.

n Made of corrosion-resistant materials.

n Maximum operating pressure of 300 PSI (20 bar).

n QJ39684 uses Nylon nut instead of brass nut.

Note: Support is normally supplied by the customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information.

QJ300 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies n Low-profile design allows maximum

protection against damage.n Available with single and double hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton optional.

n Maximum operating pressure of 300 PSI (20 bar).

QJ300 Series is also available in polypropylene. Maximum operating pressure is 150 PSI (10 bar).

QJ200 Series Diaphragm Check Valve Quick TeeJet Nozzle Assembliesn Available with single, double or triple hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver®.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton® optional.

n Maximum operating pressure of 125 PSI (9 bar).

QJ100 Series Quick TeeJet Nozzle Bodyn Hose barb sizes for 3/89, 1/29

or 3/49 I.D. hose.n Maximum operating pressure

of 125 PSI (9 bar).

Note: See page 54 for vari-spacing clamps. See page 63 for Quick TeeJet caps.

Single Nozzle Bodies for Dry Booms

BOOM COMPONENTS

ENGLISH

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

57

22252-312-375-NYB

22252-312-500-NYB

22252-312-750-NYB

22251-311-375-NYB

22251-311-500-NYB

22251-311-750-NYB

19351-213-406-NYB

19351-213-540-NYB

19351-213-785-NYB

19350-212-406-NYB

19350-212-540-NYB

19350-212-785-NYB

19349-211-406-NYB

19349-211-540-NYB

19349-211-785-NYB

18637-113-406-NYB

18640-113-540-NYB

18721-113-785-NYB

18636-112-406-NYB

18639-112-540-NYB

18720-112-785-NYB

18635-111-406-NYB

18638-111-540-NYB

18719-111-785-NYB

Double QJ39685-2-500-NYB

Single Right QJ39685-1R-500-NYB

Single Left QJ39685-1L-500-NYB

QJ39685 Series Quick TeeJet Nozzle BodyFeatures:n Use with Quick TeeJet caps.

n Hose shanks available in double or single (left or right) for 1/29 hose I.D.

n TeeJet ChemSaver drip-free shutoff.

n Made of corrosion-resistant materials.

n Maximum operating pressure of 300 PSI (20 bar).

n QJ39684 uses Nylon nut instead of brass nut.

Note: Support is normally supplied by the customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information.

QJ300 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies n Low-profile design allows maximum

protection against damage.n Available with single and double hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton optional.

n Maximum operating pressure of 300 PSI (20 bar).

QJ300 Series is also available in polypropylene. Maximum operating pressure is 150 PSI (10 bar).

QJ200 Series Diaphragm Check Valve Quick TeeJet Nozzle Assembliesn Available with single, double or triple hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver®.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton® optional.

n Maximum operating pressure of 125 PSI (9 bar).

QJ100 Series Quick TeeJet Nozzle Bodyn Hose barb sizes for 3/89, 1/29

or 3/49 I.D. hose.n Maximum operating pressure

of 125 PSI (9 bar).

Note: See page 54 for vari-spacing clamps. See page 63 for Quick TeeJet caps.

Single Nozzle Bodies for Dry Booms

BOOM COMPONENTS

ENGLISH

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

57

22252-312-375-NYB

22252-312-500-NYB

22252-312-750-NYB

22251-311-375-NYB

22251-311-500-NYB

22251-311-750-NYB

19351-213-406-NYB

19351-213-540-NYB

19351-213-785-NYB

19350-212-406-NYB

19350-212-540-NYB

19350-212-785-NYB

19349-211-406-NYB

19349-211-540-NYB

19349-211-785-NYB

18637-113-406-NYB

18640-113-540-NYB

18721-113-785-NYB

18636-112-406-NYB

18639-112-540-NYB

18720-112-785-NYB

18635-111-406-NYB

18638-111-540-NYB

18719-111-785-NYB

Double QJ39685-2-500-NYB

Single Right QJ39685-1R-500-NYB

Single Left QJ39685-1L-500-NYB

QJ39685 Series Quick TeeJet Nozzle BodyFeatures:n Use with Quick TeeJet caps.

n Hose shanks available in double or single (left or right) for 1/29 hose I.D.

n TeeJet ChemSaver drip-free shutoff.

n Made of corrosion-resistant materials.

n Maximum operating pressure of 300 PSI (20 bar).

n QJ39684 uses Nylon nut instead of brass nut.

Note: Support is normally supplied by the customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information.

QJ300 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies n Low-profile design allows maximum

protection against damage.n Available with single and double hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton optional.

n Maximum operating pressure of 300 PSI (20 bar).

QJ300 Series is also available in polypropylene. Maximum operating pressure is 150 PSI (10 bar).

QJ200 Series Diaphragm Check Valve Quick TeeJet Nozzle Assembliesn Available with single, double or triple hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver®.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton® optional.

n Maximum operating pressure of 125 PSI (9 bar).

QJ100 Series Quick TeeJet Nozzle Bodyn Hose barb sizes for 3/89, 1/29

or 3/49 I.D. hose.n Maximum operating pressure

of 125 PSI (9 bar).

Note: See page 54 for vari-spacing clamps. See page 63 for Quick TeeJet caps.

Single Nozzle Bodies for Dry Booms

BOOM COMPONENTS

ENGLISH

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

57

22252-312-375-NYB

22252-312-500-NYB

22252-312-750-NYB

22251-311-375-NYB

22251-311-500-NYB

22251-311-750-NYB

19351-213-406-NYB

19351-213-540-NYB

19351-213-785-NYB

19350-212-406-NYB

19350-212-540-NYB

19350-212-785-NYB

19349-211-406-NYB

19349-211-540-NYB

19349-211-785-NYB

18637-113-406-NYB

18640-113-540-NYB

18721-113-785-NYB

18636-112-406-NYB

18639-112-540-NYB

18720-112-785-NYB

18635-111-406-NYB

18638-111-540-NYB

18719-111-785-NYB

Double QJ39685-2-500-NYB

Single Right QJ39685-1R-500-NYB

Single Left QJ39685-1L-500-NYB

QJ39685 Series Quick TeeJet Nozzle BodyFeatures:n Use with Quick TeeJet caps.

n Hose shanks available in double or single (left or right) for 1/29 hose I.D.

n TeeJet ChemSaver drip-free shutoff.

n Made of corrosion-resistant materials.

n Maximum operating pressure of 300 PSI (20 bar).

n QJ39684 uses Nylon nut instead of brass nut.

Note: Support is normally supplied by the customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information.

QJ300 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies n Low-profile design allows maximum

protection against damage.n Available with single and double hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton optional.

n Maximum operating pressure of 300 PSI (20 bar).

QJ300 Series is also available in polypropylene. Maximum operating pressure is 150 PSI (10 bar).

QJ200 Series Diaphragm Check Valve Quick TeeJet Nozzle Assembliesn Available with single, double or triple hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver®.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton® optional.

n Maximum operating pressure of 125 PSI (9 bar).

QJ100 Series Quick TeeJet Nozzle Bodyn Hose barb sizes for 3/89, 1/29

or 3/49 I.D. hose.n Maximum operating pressure

of 125 PSI (9 bar).

Note: See page 54 for vari-spacing clamps. See page 63 for Quick TeeJet caps.

Single Nozzle Bodies for Dry Booms

BOOM COMPONENTS

ENGLISH

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

57

22252-312-375-NYB

22252-312-500-NYB

22252-312-750-NYB

22251-311-375-NYB

22251-311-500-NYB

22251-311-750-NYB

19351-213-406-NYB

19351-213-540-NYB

19351-213-785-NYB

19350-212-406-NYB

19350-212-540-NYB

19350-212-785-NYB

19349-211-406-NYB

19349-211-540-NYB

19349-211-785-NYB

18637-113-406-NYB

18640-113-540-NYB

18721-113-785-NYB

18636-112-406-NYB

18639-112-540-NYB

18720-112-785-NYB

18635-111-406-NYB

18638-111-540-NYB

18719-111-785-NYB

Double QJ39685-2-500-NYB

Single Right QJ39685-1R-500-NYB

Single Left QJ39685-1L-500-NYB

QJ39685 Series Quick TeeJet Nozzle BodyFeatures:n Use with Quick TeeJet caps.

n Hose shanks available in double or single (left or right) for 1/29 hose I.D.

n TeeJet ChemSaver drip-free shutoff.

n Made of corrosion-resistant materials.

n Maximum operating pressure of 300 PSI (20 bar).

n QJ39684 uses Nylon nut instead of brass nut.

Note: Support is normally supplied by the customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information.

QJ300 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies n Low-profile design allows maximum

protection against damage.n Available with single and double hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton optional.

n Maximum operating pressure of 300 PSI (20 bar).

QJ300 Series is also available in polypropylene. Maximum operating pressure is 150 PSI (10 bar).

QJ200 Series Diaphragm Check Valve Quick TeeJet Nozzle Assembliesn Available with single, double or triple hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver®.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton® optional.

n Maximum operating pressure of 125 PSI (9 bar).

QJ100 Series Quick TeeJet Nozzle Bodyn Hose barb sizes for 3/89, 1/29

or 3/49 I.D. hose.n Maximum operating pressure

of 125 PSI (9 bar).

Note: See page 54 for vari-spacing clamps. See page 63 for Quick TeeJet caps.

Single Nozzle Bodies for Dry Booms

BOOM COMPONENTS

ENGLISH

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

57

22252-312-375-NYB

22252-312-500-NYB

22252-312-750-NYB

22251-311-375-NYB

22251-311-500-NYB

22251-311-750-NYB

19351-213-406-NYB

19351-213-540-NYB

19351-213-785-NYB

19350-212-406-NYB

19350-212-540-NYB

19350-212-785-NYB

19349-211-406-NYB

19349-211-540-NYB

19349-211-785-NYB

18637-113-406-NYB

18640-113-540-NYB

18721-113-785-NYB

18636-112-406-NYB

18639-112-540-NYB

18720-112-785-NYB

18635-111-406-NYB

18638-111-540-NYB

18719-111-785-NYB

Double QJ39685-2-500-NYB

Single Right QJ39685-1R-500-NYB

Single Left QJ39685-1L-500-NYB

QJ39685 Series Quick TeeJet Nozzle BodyFeatures:n Use with Quick TeeJet caps.

n Hose shanks available in double or single (left or right) for 1/29 hose I.D.

n TeeJet ChemSaver drip-free shutoff.

n Made of corrosion-resistant materials.

n Maximum operating pressure of 300 PSI (20 bar).

n QJ39684 uses Nylon nut instead of brass nut.

Note: Support is normally supplied by the customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information.

QJ300 Series Diaphragm Check Valve Quick TeeJet Nozzle Assemblies n Low-profile design allows maximum

protection against damage.n Available with single and double hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton optional.

n Maximum operating pressure of 300 PSI (20 bar).

QJ300 Series is also available in polypropylene. Maximum operating pressure is 150 PSI (10 bar).

QJ200 Series Diaphragm Check Valve Quick TeeJet Nozzle Assembliesn Available with single, double or triple hose

shanks for 3/89, 1/29 and 3/49 I.D. hose.n Drip-free shutoff with TeeJet ChemSaver®.

Opens at 10 PSI (0.7 bar). Standard diaphragm is EPDM with Viton® optional.

n Maximum operating pressure of 125 PSI (9 bar).

QJ100 Series Quick TeeJet Nozzle Bodyn Hose barb sizes for 3/89, 1/29

or 3/49 I.D. hose.n Maximum operating pressure

of 125 PSI (9 bar).

Note: See page 54 for vari-spacing clamps. See page 63 for Quick TeeJet caps.

Single Nozzle Bodies for Dry Booms

BOOM COMPONENTS

ENGLISH

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR tRIPLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR SINgLe

to fIt hoSe I.D.

3/89

1/29

3/49

PaRt NuMBeR DouBLe

to fIt hoSe I.D.

3/89

1/29

3/49

QJ100 Series Quick TeeJet Nozzle Body• Use with Quick TeeJet Caps.• Hose shanks available in double or single (left or right) for 1/2” hose I.D.• TeeJet ChemSaver drip-free shutoff.• Made of corrosion-resistant materials.• Maximum operating pressure of 300 PSI.• QJ39684 uses Nylon nut instead of brass nut.

QJ39685-1R-500-NYB QJ39685-1L-500-NYB QJ39685-2-500-NYB

All Sizes - $8.97

Vari-Spacing Clamps for Use on Dry Boom Quick TeeJet BodiesMeasure the inside diameter of round pipe for the proper size.

For square clamps measure the outside diameter.

Part# To Clamp On Price

QJ111-1/2 1/2” Pipe $3.54

QJ111-3/4 3/4” Pipe $3.54

QJ111-1 1’ Pipe $3.54

QJ111-1-1/4 1 1/4” Pipe $3.54

QJ111HP-3/4 3/4” Pipe $13.64

QJ111SQ-3/4 3/4” Square Tubing $3.54

QJ111SQ-1 1” Square Tubing $3.54

QJ111SQ-1-1/4 1 1/4” Square Tubing $3.54

QJ111SQ-1-1/2 1 1/2” Square Tubing $3.54

QJ111SQ-*-304SS Stainless Steel Clamp. Available to fit $7.82 3/4”, 1 1/4” & 1 1/2’ Square Tubing

QJ111SQ

QJ111

QJ111HP

To FitPart Number Hose I.D. PriceSingle22251311-375NYB 3/8” $10.9622251311-500NYB 1/2” $10.9622251311-750NYB 3/4” $10.96

Double22252312-375NYB 3/8” $10.9622252312-500NYB 1/2” $10.9622252312-750NYB 3/4” $10.96

Part # For Use With TeeJet Nozzle Body List Price115880-1-12-05 12 V/QJ17560A, QJ360E, $261.10 QJ200, QJ300, 24216A, 24230A, QJ39685, QJ(T)8360 115880-2-12-05 12 V/QJ360C, QJ360F, QJ370 $261.10 QJ22187, QJ8355, 8355 98552-05 2 Wire, 0.5M Metri-Pack Cable $20.2098552-15 2 Wire, 1.5M Metri-Pack Cable $26.0398552-30 2 Wire, 3.0M Metri-Pack Cable $33.90

The 115880 e-ChemSaver is a solenoid actuated shutoff compatible with a wide range of TeeJet nozzle bodies

equipped with a diaphragm check valve. It can be used for end of boom nozzles as well as individual tip shutoff

and PWM controls.

* Solenoids come standard with 0.5M Cable

115880 e-ChemSaver® Electric Solenoid Shutoff

LIST PRICE CATALOG

PLEAS E A P P LY D I S C OUNT

SPRAYER

SPECIALTIES

Grimes, IA 800-351-1587 • Gardner, KS 877-829-8502 • Brimfield, IL 855-778-8500

36

36

Page 2: TEEJET NOZZLE BODIES & COMPONENTS · customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information. QJ300 Series Diaphragm n Check Valve Quick TeeJet

Multiple Nozzle Body Assemblies

Triple Nozzle Body for Dry Boom• Designed to greatly simplify changing spray tips in the field.• Provides three spray positions for easy change of spray tips or quick boom flushing.• Positive shutoff between each spray position.• Includes ChemSaver diaphragm check valve drip-free shutoff. Opens at 10 PSI.• Standard EPDM diaphragm with Viton available as an option.• Can be used with all Quick TeeJet caps.• Nylon Body• Maximum operating pressure of 125 PSI.• Available in 1/2” and 3/4” single, double or triple hose shanks.

Triple Nozzle Body for Wet Boom• Can be mounted to a 20 mm, 1/2”, 3/4” or 1” pipe or equivalent size tubing.• Provides three spray positions for easy change of spray tips.• Shutoff position provided between each spray position.• Features ChemSaver drip-free shutoff. Requires 10 PSI at the nozzle to open check valve.• Standard diaphragm of EPDM with optional Viton available• Maximum operating pressure of 150 PSI.• 1/2” and 3/4” sizes include mounting hole in upper clamp subassembly for attachment to flat surfaces.• Mounts to a 3/8” hole drilled in pipe or tubing

QUICK TEEJET NOZZLE BODIES & COMPONENTS TEEJET NO

ZZ

LE BO

DIES

& C

OM

PO

NEN

TS

Type QJ17560A-NYB• Can be mounted to 20mm, 25mm, 1/2”, 3/4” or 1” pipe or equivalent size tubing.• Features ChemSaver drip-free shutoff. Requires 10 PSI at the nozzle to open check valve.• Standard diaphragm of EPDM with optional Viton available.• Mounts to a 3/8” hole drilled in pipe or tubing.• Maximum operating pressure of 300 PSI.

Type QJ7421-NYB• Can be mounted to 1/2”, 3/4” or 1” pipe or equivalent size tubing.• Mounts to a 3/8” hole drilled in pipe or tubing.• Maximum operating pressure of 300 PSI. • 1/2” and 3/4” sizes include a mounting hole in upper clamp subassembly for mounting to flat surfaces.

Type QJ22187-NYB• Can be mounted on 1/2”, 3/4” or 1” pipe or equivalent size tubing.• 1/2” and 3/4” sizes include a mounting hole in clamp subassembly for mounting to flat surfaces.• Allows side mounting to flat surface for protection of nozzle body. • Features ChemSaver drip-free shutoff. Requires 10 PSI at the nozzle to open check valve.• Standard diaphragm of EPDM with optional Viton available.

Part# To Clamp On PriceQJ22187-1/2-NYB 1/2” Pipe $13.54QJ22187-3/4-NYB 3/4” Pipe $13.54QJ22187-1-NYB 1” Pipe $13.54

Part# To Clamp On PriceQJ17560A-20MM-NYB 20 mm $5.81 QJ17560A-25MM-NYB 25 mm $5.81QJ17560A-1/2-NYB 1/2” Pipe $5.81QJ17560A-3/4-NYB 3/4” Pipe $5.81QJ17560A-1-NYB 1” Pipe $5.81 Available w/ Viton Seals, SPECIAL ORDER $7.13

Part# To Clamp On PriceQJ7421-1/2-NYB 1/2” Pipe $5.38QJ7421-3/4-NYB 3/4” Pipe $5.38QJ7421-1-NYB 1” Pipe $5.38

QJ1/4T-NYB & QJT-NYB• QJ1/4T-NYB allows use of Quick TeeJet system with 1/4” NPT connections.• QJT-NYB permits use of Quick TeeJet system with standard 11/16”-16 TeeJet thread.• Maximum operating pressure of 300 PSI. Part# To Fit PriceQJ1/4T-NYB 1/4” (F) thread $3.67QJT-NYB 11/16-16 TeeJet Thread $6.81

QJ1/4TT-NYB• Allows use of Quick TeeJet system with 1/4” NPT female connections.• Maximum operating pressure of 300 PSI.

Part# To Fit PriceQJ1/4TT-NYB 1/4” (M) thread $3.67

Part# To Fit Price22674-1/4-NYB 1/4” (M) thread $3.67

22674-1/4-NYB• Allows use of Quick TeeJet system with 1/4” NPT female connections.

QJT8360-NYBQJ8360-NYB• Retrofits to a Quick TeeJet systems.• Features ChemSaver no- drip shutoff. Requires 10 PSI at the nozzle to open check valve• Standard diaphragm of EPDM with optional Viton available upon request.• Maximum operating pressure of 300 PSI.• NEW - Now Available with actual John Guest fittings for 1/4” or 3/8” OD tubing, into both the Quick TeeJet no-drip nozzle body & Quick TeeJet Cap.Part# To Fit PriceQJ8360-NYB 1/4” (M) thread $6.68QJT8360-NYB 11/16-16 TeeJet Thread $7.27QJ98595-1/4-# $23.09 Complete Assembly - 1/4” Push-In FittingQJ98594-3/8-# $23.09 Complete Assembly - 3/8” Push-In FittingQJ114401-5/16-# $23.09 Complete Assembly - 5/16” Push-In Fitting

CP20266-EPDM Nozzle Thread Gasket $23.09# - Specify No-Drip Size, Available in 2, 5, 8 or 10 lb

QJ90-1-NYB• Fits standard Quick TeeJet bodies.• Nylon body construction for strength & durability, with EPDM gasket (Viton optional)• Outlet can be fitted with Quick TeeJet caps & TeeJet spray tips.• One piece, 90o elbow is ideal for installation of TK-VS FloodJet & TF-VS or TF-VP Turbo FloodJet nozzles on single or multiple outlet nozzle bodies.• Adapter outlet accepts standard tip strainers.• Maximum operating pressure of 300 PSI. Part# To Fit PriceQJ90-1-NYR Quick TeeJet $5.95QJ90-2-NYR Quick TeeJet $5.95

QJ8355-NYB• Allows use of Quick TeeJet system with 1/8” and 1/4” NPT female connections.• Side mounting provides protection of the nozzle body.• Features ChemSaver no-drip shutoff. Requires 10 PSI at the nozzle to open check valve. • Standard diaphragm of EPDM with optional Viton available upon request.• Maximum operating pressure of 300 PSI.

Part# To Fit PriceQJ8355-1/8-NYB 1/8” (F) thread $13.42QJ8355-1/4-NYB 1/4” (F) thread $13.42

Adapters and Accessories

List Price $28.48All Sizes with standard EPDM

Internal O-Rings PART NUMBER TO CLAM ON24216A-20MM-NYB 20 mm 24216A-1/2-NYB 1/2” Pipe24216A-3/4-NYB 3/4” Pipe24216A-1-NYB 1” Pipe

PART NUMBER TO FIT SINGLE DOUBLE TRIPLE HOSE24230A-1-540-NYB 24230A-2-540-NYB 24230A-3-540-NYB 1/2”24230A-1-785-NYB 24230A-2-785-NYB 24230A-3-785-NYB 3/4”

List Price $27.73All Sizes with standard EPDM

Internal O-Rings

REPLACEMENT O-RINGSPart# Material PriceCP7717-2/110-BU Buna-N $.84CP7717-2/110-VI Viton $1.27

SEE PAGE 356 FOR MORE TEEJET PUSH-TO-CONNECT FITTINGS

LIST PRICE CATALOG

PLEAS E A P P LY D I S C OUNT

SPRAYER

SPECIALTIES

Grimes, IA 800-351-1587 • Gardner, KS 877-829-8502 • Brimfield, IL 855-778-8500

37

37

Page 3: TEEJET NOZZLE BODIES & COMPONENTS · customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information. QJ300 Series Diaphragm n Check Valve Quick TeeJet

QUICK TEEJET NOZZLE BODIES & COMPONENTS QUICK TEEJET NOZZLE BODIES & COMPONENTSTE

EJET

NO

ZZ

LE B

OD

IES

& C

OM

PO

NEN

TS

# OF OUTLETS

333

333

TO FIT HOSE ID

1/2”3/4”1”

1/2”3/4”1”

LIST PRICE

$25.88$25.88$25.88

$25.88$25.88$25.88

PART NO.

QJ363C-500-1-NYBQJ363C-750-1-NYB

QJ363C-1000-1-NYB

QJ363C-500-2-NYBQJ363C-750-2-NYB

QJ363C-1000-2-NYB

SINGLE HOSE SHANK

DOUBLE HOSE SHANK

# OF OUTLETS

444

444

TO FIT HOSE ID

1/2”3/4”1”

1/2”3/4”1”

LIST PRICE

$25.88$25.88$25.88

$25.88$25.88$25.88

PART NO.

QJ364C-500-1-NYBQJ364C-750-1-NYB

QJ364C-1000-1-NYB

QJ364C-500-2-NYBQJ364C-750-2-NYB

QJ364C-1000-2-NYB

SINGLE HOSE SHANK

DOUBLE HOSE SHANK

# OF OUTLETS

555

555

TO FIT HOSE ID

1/2”3/4”1”

1/2”3/4”1”

LIST PRICE

$25.88$25.88$25.88

$25.88$25.88$25.88

PART NO.

QJ365C-500-1-NYBQJ365C-750-1-NYB

QJ365C-1000-1-NYB

QJ365C-500-2-NYBQJ365C-750-2-NYB

QJ365C-1000-2-NYB

SINGLE HOSE SHANK

DOUBLE HOSE SHANK

# OF OUTLETS

33333

TO CLAMP ON

20mm25mm1/2”3/4”1”

LIST PRICE$20.72$20.72$20.72$20.72$20.72

PART NO.QJ363E-20MM-NYBQJ363C-25MM-NYB

QJ363C-1/2-NYBQJ363C-3/4-NYBQJ363C-1-NYB

# OF OUTLETS

44444

TO CLAMP ON

20mm25mm1/2”3/4”1”

LIST PRICE$20.72$20.72$20.72$20.72$20.72

PART NO.QJ364E-20MM-NYBQJ364C-25MM-NYB

QJ364C-1/2-NYBQJ364C-3/4-NYBQJ364C-1-NYB

# OF OUTLETS

55555

TO CLAMP ON

20mm25mm1/2”3/4”1”

LIST PRICE$20.72$20.72$20.72$20.72$20.72

PART NO.QJ365E-20MM-NYBQJ365C-25MM-NYB

QJ365C-1/2-NYBQJ365C-3/4-NYBQJ365C-1-NYB

QJ363C w/ Viton Internal O-Ring-Special Order $23.87 QJ364C w/ Viton Internal O-Ring-Special Order $23.87 QJ365C w/ Viton Internal O-Ring-Special Order $23.87

QJ365C w/ Viton Internal O-Ring-Special Order $31.01QJ364C w/ Viton Internal O-Ring-Special Order $31.01QJ363C w/ Viton Internal O-Ring-Special Order $31.01

# OF OUTLETS

3 + 14 + 15 + 1

TO CLAMP ON1”1”1”

LIST PRICE$25.86$25.86$25.86

PART NO.QJ363F-1-NYBQJ364F-1-NYBQJ365F-1-NYB

# OF OUTLETS

33

3 + 13 + 1

TO CLAMP ON3/4”1”

3/4”1”

LIST PRICE$40.99$40.99$44.74$44.74

PART NO.QJ383-3/4-NYBQJ383-1-NYB

QJ383F-3/4-NYBQJ383F-1-NYBQJ360F w/ Viton Internal O-Ring-Special Order $31.57

CP98488-VI $8.75J.D. Retrofit Seal

TO FIT HOSE ID

1/2”3/4”1”

LIST PRICE

$23.29$23.29$23.29

PART NO.

QJ37#-500-*-NYBQJ37#-750-*-NYB

QJ37#-1000-*-NYB

DRY BOOM

# - Specify number of outlets (Available with 3 or 5)* - Specify number of hose barbs (Available with 1 or 2)

# OF OUTLETS

3 or 53 or 53 or 5

TO CLAMP ON

1/2”3/4”1”

LIST PRICE

$18.63$18.63$18.63

PART NO.

QJ37#-1/2-NYBQJ37#-3/4-NYBQJ37#-1-NYB

WET BOOM

# - Specify number of outlets (Available with 3 or 5)

Multiple Nozzle Body Assemblies

# OF OUTLETS

3 or 53 or 53 or 5

Combo of TeeJet High Flow Nozzle Body and Retrofit Seal will replace John Deere High Flow Nozzle Bodies

JOHN DEERE RETROFIT SEALA alternative to replace high flow nozzle bodies on the John

Deere Sprayers. Adapts to any Quick TeeJet wet boom nozzle body with the 3/8” diameter inlet to the large 11/16”

diameter John Deere high capacity wet boom.

QJ380 High Flow Nozzle Body

CP98488-VI

High capacity multiple outlet nozzle body is ideal for high speed, high

volume applications including liquid fertilizer.

QJ360 Nozzle Body withFertilizer Outlet

Single fertilizer nozzle outlet with shutoff cap and either 3,4 or 5 spray positions for easy change of spray

tips or quick boom flushing.

QJ370 Compact Nozzle Body

Compact High Flow nozzle body with choice

of 3 or 5 outlets.

QJ363 Nozzle Bodyfor Wet Boom

QJ364 Nozzle Bodyfor Wet Boom

QJ365 Nozzle Bodyfor Wet Boom

QJ363 Nozzle Bodyfor Dry Boom

QJ364 Nozzle Bodyfor Dry Boom

QJ365 Nozzle Bodyfor Dry Boom

LIST PRICE CATALOG

PLEAS E A P P LY D I S C OUNT

SPRAYER

SPECIALTIES

Grimes, IA 800-351-1587 • Gardner, KS 877-829-8502 • Brimfield, IL 855-778-8500

38

38

Page 4: TEEJET NOZZLE BODIES & COMPONENTS · customer. TeeJet vari-spacing clamps AA111-* can be used. See page 69 for order information. QJ300 Series Diaphragm n Check Valve Quick TeeJet

QUICK TEEJET NOZZLE BODIES & COMPONENTS TEEJET NO

ZZ

LE BO

DIES

& C

OM

PO

NEN

TS

QJ360C Multiple Nozzle Body Assembly

ITEMNO.

12234456

7A7B7C889

PART NO.CP38930-8-NYB

CP7717-2-13-EPRCP7717-2-13-VICP38931-NYB

CP7717-M28X3-EPRTFECP7717-M28X3-VITFE

CP56726-VITFECP7717-2-111-VICP38921-2-NYBCP38922-2-NYBCP38923-2-NYBCP21953-EPRCP21953-VI

21950-10-NYB

DESCRIPTIONPlug, Nylon (Black)

O-Ring, EPDMO-Ring, Viton (Optional)

E-Clip, Nylon (Black)O-Ring, EPR-Teflon Filled (2 Req’d)

O-Ring, Viton-Teflon Filled (2 Req’d) Opt.Seal, Viton-Teflon Filled

O-Ring, VitonTurret, Nylon (Black) (3 Outlet)Turret, Nylon (Black) (4 Outlet)Turret, Nylon (Black) (5 Outlet)

Diaphragm, EPDMDiaphragm, Viton (Optional)

End Cap Sub-assembly, Nylon (Black)

LISTPRICE$2.62 $3.41$8.96 $2.62 $4.83

$13.21 $8.12 $8.96 $6.72 $7.22 $7.67 $.70

$2.17 $5.31

ITEMNO.1010101011111213131314

15A15B15C16A16B16C17

PART NO.CP38942-2-NYBCP38925-2-NYBCP38926-2-NYBCP50101-1-NYB

CP7717-2-110-BUCP7717-2-110-VI

CP48255-1-1/4-302SSCP48223-NYBCP48221-NYBCP48222-NYBCP48256-SS

CP38936-NYBCP38938-NYBCP38940-NYBCP38937-NYBCP38939-NYBCP38941-NYBCP38948-NYB

DESCRIPTION1/2” Body, Nylon (Black)3/4” Body, Nylon (Black)1” Body, Nylon (Black)

1” Body F, Nylon (Black)O-Ring, Buna-N

O-Ring, Viton (Optional)Screw, Stainless Steel

1/2” Upper Clamp, Nylon (Black) 3/4” Upper Clamp, Nylon (Black)1” Upper Clamp, Nylon (Black)

Pivot Pin, Stainless Steel1/2” Single Hose Barb, Nylon (Black)3/4” Single Hose Barb, Nylon (Black)1” Single Hose Barb, Nylon (Black)

1/2” Double Hose Barb, Nylon (Black)3/4” Double Hose Barb, Nylon (Black)1” Double Hose Barb, Nylon (Black)

3/4” Hose Barb x 1/2” NPT, Nylon (Black)

LISTPRICE$7.40 $7.40$7.40$7.40 $.84 $1.27 $4.93 $2.60 $2.60 $2.60 $1.37 $4.17 $4.17$4.17 $4.94 $4.94 $4.94 $4.94

To verify size of Wet Boom Bodies, Measure the inside diameter of the pipe.

ITEMNO.

123456

6.1789

1010.111

11.B1213

13A

PART NO.CP98475-NYB

CP7717-M10X1.8-VICP38931-NYBCP98474-NYB

CP7717-2/131-VICP98476-CECP98477-CECP7717-11-VICP98479-VICP48256-SS

CP48221-NYBCP48222-NYB

CP7717-2/110-VICP98488-VI

CP48255-1-1/4-302SS98480

CP98484-VI

DESCRIPTIONPlug, Nylon (Black)

O-Ring, VitonE-Clip, Nylon (Black)Turret, Nylon (Black)

O-Ring, Viton (2 Req’d)3/4” Body, Celcon (Black)1” Body, Celcon (Black)

O-Ring, VitonSeal, Viton

Pivot Pin, Stainless Steel3/4” Upper Clamp, Nylon (Black)1” Upper Clamp, Nylon (Black)

O-Ring, Viton11/16” Inlet Adapter Gasket (Optional)

Screw, Stainless SteelCheck Valve Sub-Assembly (w/ Diaphragm)

Diaphragm, Viton

LISTPRICE$3.40$1.08$2.62$10.50 $12.66 $24.51 $24.51 $13.89 $12.96 $1.37 $2.60 $2.60 $1.27 $8.75 $4.93 $30.30 $6.98

QJ380C Multiple Nozzle Body AssemblyPARTS BREAKDOWN

LIST PRICE CATALOG

PLEAS E A P P LY D I S C OUNT

SPRAYER

SPECIALTIES

Grimes, IA 800-351-1587 • Gardner, KS 877-829-8502 • Brimfield, IL 855-778-8500

39

39