Pipe Clamps
-
Upload
shankar-raj -
Category
Documents
-
view
62 -
download
6
description
Transcript of Pipe Clamps
2
Inde
x
This catalogue is designed to be helpful to engineers
and contractors in the application and selection of suitable
products for construction and maintenance. If a unique
application requires a special product not included in this
catalogue, SFSP engineering personnel are ready to furnish
design, consultation and realistic cost estimates. In addition,
know-how are available for your convenience.
SFSP an economical solution for electrical mechanical and
industrial supports with a wide variety of application in the
construction industry.
3
Intr
oduc
tion
For more informat ion v is i t SFSP Websi te www.sfsp- ikk.com
* IMPORTANT NOTE
Inde
x
Introduction
Index
Certificates
Factories
SFSP Factory
Uni-Metal Overview
Applicable Standards
Pipe Clamps & Hangers
Uni - Channel the Supporting Systems
Threaded Accessories
Technical Data
Unitech Diversified Spots
Unitech Companies
Conversion Table
Unitech Outlets
1
4
5
6
7
8
9
10
20
25
32
38
43
44
46
All products to be supplied in millimeters. Dimensions in inches are given just for information.
Cert
ifica
tes
5
As a declaration of Unitech’s commitment to quality, the company implemented the Quality Management Concept, and has acquired the ISO 9001:2008 which is an international standard used for the purpose of conformity assessment. It is an organizational method of setting a clear business process through a predefined workflow, in an organized manner.
SFSP - EGYPT
SFSP • Saudi Arabia
Specialized Factory for Steel Products
Jeddah - Saudi Arabia
Tel: +966 2 637 4482
Fax: +966 2 636 1963
SFSP • United Arab Emirates
SIGMA Factory for Steel Products
Ajman - United Arab Emirates
Tel: +971 6 743 9907
Fax: +971 6 743 9908
SIGMA Factory for Steel Products
Umm Al Quwain - United Arab
Emirates
Tel: +971 6 767 0514
Fax: +971 6 767 0515
SFSP • Egypt
Specialized Factory for Steel Products
6th of October, Cairo - Egypt
Tel: +20 23 831 2477
Fax: +20 23 831 1036
Fact
orie
s
6
Specialized Factory for Steel Products was first established
in KSA in 1989; it has been expanding ever since through a
variety of products and through its geographical presence.
Production at the factory is observed using modern practices
of manufacturing methods in the steel construction industry
with a definite compliance to the international standards
of fabrication. SFSP has manufacturing facilities in KSA, UAE,
Egypt and Jordan. SFSP adapts quickly and easily to the
market demands and requirements. The use of advanced
building products, and especially steel products for the
construction industry is witnessing a rapid development.
Quality at SFSP is uncompromised; the factories have been
able to acquire ISO 9001: 2008 in Jeddah in Saudi Arabia ,
6th of October City in Egypt and in Sigma Factory for Steel
Products in Ajman as well.
7
CNC Machines
Roll Forming
Hot Dip Galvanization
SFSP
Fac
tory
SFSP
Fac
tory
Uni-
Met
al O
verv
iew
8
Uni Metal trades steel construction products includ-ing expanded metals, cladding fixations, c-channel systems, clamps and hangers, block ladders, dry wall and ceiling accessories, cable management systems; cable trays, cable ladders, cable trunkings, cable support, steel lintels and block work accessories, in addition to garbage and linen chutes. Most are de-signed and manufactured in its Specialized Factory for Steel Products (SFSP).
Uni Metal offices are spread among various cities in MENA region; KSA, UAE, Qatar, Lebanon, Jordan, Libya, Oman, Bahrain, Egypt, Kuwait, & Yemen and all are backed up by Unitech’s design office in Stuttgart-Germany.
Uni Metal offices are spread among various cities in MENA region; KSA, UAE, Qatar, Lebanon, Jordan, Libya, Oman, Bahrain, Egypt, Kuwait, & Yemen and all are backed up by Unitech’s design office in Stuttgart-
ETALETALET
Uni-Metal trades in-house produced steel con-struction products, all designed and manufac-tured in SFSP plants located in KSA, UAE, andEgypt.
9
- ASTM F 708 (standard practice for design and installation of rigid pipe hangers)
- BS 3974 Specifications for pipe hangers and support
- Manufacturers Standardization Society (MSS)
- Federal Specifications WW-H-171 E (Hanger and Support) A-A-1192 A (Bracket, Pipe)
Sp-58 Pipe Hangers and Support-Materials, Design and Manufacture
Sp-69 Pipe Hangers and Support-Selection and Application
Sp-77 Guidelines for Pipe Support Contractual Relationships
Sp-89 Pipe Hangers and Support-Fabrication and Installation Practices
Sp-90 Guidelines for Terminology for Pipe Hangers and Support
Sp-127 Bracing for Piping Systems Seismic-Wind- Dynamic Design, Selection, Application
Appl
icab
le S
tand
ards
Applicable Standards
10
PIPE CLAMPS
HANGERS
11
Intr
oduc
tion
PIPE CLAMPS
HANGERSPipe hangers offered in this section are designed to support pipes allowing for vetical adjustment and limited movement in the piping system.
- Material: Carbon Steels are used in the manufacturing of pipe hangers.
- Load Data: The load data published includes a safety factor of 4.0 unless noted (safety factor = ratio of ultimate load to the design load).
Nominal Pipe Size
Thickness& Width
Outside Diameter
Load CapacitySide Bolt
12
Pipe
Cla
mps
W.
T.
S.B.
M8
O.D.
- Material: Steel S235- Service: Economy option- Finish: Electro Zinc Plated- Applications: - Unassembled in plastic bags per 2 sets- M6 screw with cross head
Split Pipe Clamp with Standard Nut M8 without rubber gasket
NPS: Nominal Pipe Size - OD: Outside Diameter - SB: Side Bolt - T-W: Thickness - Width
- Material: Steel S235- Service: Multifunction screw with hexagonal combination head (slot & crosshead), c/ w retaining washer- Finish: Electro Zinc Plated
Split Pipe Clamp with Long Nut M8/ M10 without rubber gasket
--- Applications: Applications: Applications: - Fresh water distribution pipes- Fresh water distribution pipes- Fresh water distribution pipes- Waste water distribution pipes- Waste water distribution pipes- Waste water distribution pipes- Gas distribution pipes- Gas distribution pipes- Gas distribution pipes- Heating pipes- Heating pipes- Heating pipes- Industrial pipe fitting- Industrial pipe fitting- Industrial pipe fitting- Mechanical installation- Mechanical installation- Mechanical installation- Process and control lines- Process and control lines- Process and control lines
W.
T.
S.B.
M8/10
O.D. N.P.S.
1/23/41
5/43/22
5/23456
1520253240506580
100125150
20-2526-3032-3638-4547-5160-6474-8087-92
113-118138-142159-166
M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x30
2.0x202.0x202.0x202.0x202.0x202.0x202.5x202.5x202.5x202.5x202.5x20
1.301.301.301.30 1.301.301.901.901.901.901.90
Part No. In mm mm mm KNmm
PC-0010-C-HSPC0500810PC-0015-C-HSPC0750810PC-0020-C-HSPC1000810PC-0025-C-HSPC1250810PC-0030-C-HSPC1500810PC-0035-C-HSPC2000810PC-0040-C-HSPC2500810PC-0045-C-HSPC3000810PC-0150-C-HSPC4000810PC-0155-C-HSPC5000810PC-0160-C-HSPC6000810
Nominal Pipe Size
Thickness& Width
Outside Diameter
Load CapacitySide Bolt
In mm mm KNmm mm
1.301.301.301.30 1.301.301.901.901.901.901.90
1/23/41
5/43/22
5/23456
1520253240506580
100125150
20-2526-3032-3638-4547-5160-6474-8087-92
113-118138-142159-166
M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20
2.0x202.0x202.0x202.0x202.0x202.0x202.5x202.5x202.5x202.5x202.5x20
Part No.PC-0110-C-SPC05008PC-0115-C-SPC07508PC-0120-C-SPC10008PC-0125-C-SPC12508PC-0130-C-SPC15008PC-0135-C-SPC20008PC-0140-C-SPC25008PC-0145-C-SPC30008PC-0150-C-SPC40008PC-0155-C-SPC50008PC-0160-C-SPC60008N.P.S.
Split Pipe Clamp with Long Nut M8/ M10 without rubber gasket
13
NPS: Nominal Pipe Size - OD: Outside Diameter - SB: Side Bolt - T-W: Thickness - Width
S.B.
- Material: Steel S235- Service: EPDM rubber insulation for sound reduction compliant with DIN4109- Finish: Electro Zinc Plated
Split Pipe Clamp with Rubber with Standard Nut M8
- Material: Steel S235- Service: EPDM rubber insulation for sound reduction compliant with DIN4109- Finish: Electro Zinc Plated
Split Pipe Clamp with Rubber with Long Nut M8/ M10
M8
O.D.
W.
T.
Pipe
Cla
mps
W.
T.
S.B.
M8/10
O.D.
1.301.301.301.30 1.301.301.901.901.901.901.90
1/23/41
5/43/22
5/23456
1520253240506580
100125150
20-2526-3032-3638-4547-5160-6474-8087-92
113-118138-142159-166
M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x30
2.0x202.0x202.0x202.0x202.0x202.0x202.5x202.5x202.5x202.5x202.5x20
PC-0210-C-HSPCR0500810PC-0215-C-HSPCR0750810PC-0220-C-HSPCR1000810PC-0225-C-HSPCR1250810PC-0230-C-HSPCR1500810PC-0235-C-HSPCR2000810PC-0240-C-HSPCR2500810PC-0245-C-HSPCR3000810PC-0250-C-HSPCR4000810PC-0255-C-HSPCR5000810PC-0260-C-HSPCR6000810
Nominal Pipe Size
Thickness& Width
Outside Diameter
Load CapacitySide Bolt
In mm mm KNmm mmPart No.
1/23/41
5/43/22
5/23456
1520253240506580
100125150
20-2526-3032-3638-4547-5160-6474-8087-92
113-118138-142159-166
M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20
2.0x202.0x202.0x202.0x202.0x202.0x202.5x202.5x202.5x202.5x202.5x20
1.301.301.301.30 1.301.301.901.901.901.901.90
PC-0310-C-SPCR05008PC-0315-C-SPCR07508PC-0320-C-SPCR10008PC-0325-C-SPCR12508PC-0330-C-SPCR15008PC-0335-C-SPCR20008PC-0340-C-SPCR25008PC-0345-C-SPCR30008PC-0350-C-SPCR40008PC-0355-C-SPCR50008PC-0360-C-SPCR60008
N.P.S.
N.P.S.
Nominal Pipe Size
Thickness& Width
Outside Diameter
Load CapacitySide Bolt
In mm mm KNmm mmPart No.
14
Pipe
Cla
mps
- Material: Steel S235- Service: Designed for hanging conduit (rigid or EMT) to beam clamps, available with or without closure bolt- Finish: Electro Zinc Plated
Omega Conduit & Pipe Clamp
- Material: Steel S235- Service: For mounting (rigid or EMT) and steel pipes on C-Channels- Finish: Electro Zinc Plated or Hot-dip Galvanized
Channel Clamp
1/23/41
5/43/22
5/23456
1520253240506580
100125150
2026324246607486
112138160
2530404550648092
118142165
1.5x281.5x282.0x282.0x282.5x282.5x282.5x282.8x283.0x283.0x283.0x28
Pipe Straps for thin metallic wall conduits (EMT)(Electrical Metallic Tubing)
1.301.301.301.30 1.301.301.901.901.901.901.90
WOD
T
1/23/41
5/43/22
5/23456
1520253240506580
100125150
20-2526-3032-3638-4547-5160-6474-8087-92
113-118138-142159-166
M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20M6x20
2.0x202.0x202.0x202.0x202.0x202.0x202.5x202.5x202.5x202.5x202.5x20
NPS: Nominal Pipe Size - OD: Outside Diameter - CB: Closure Bolt - T-W: Thickness - Width
1.301.301.301.30 1.301.301.901.901.901.901.90
PC-0410-C-OMCPC050PC-0415-C-OMCPC075PC-0420-C-OMCPC100PC-0425-C-OMCPC125PC-0430-C-OMCPC150PC-0435-C-OMCPC200PC-0440-C-OMCPC250PC-0445-C-OMCPC300PC-0450-C-OMCPC400PC-0455-C-OMCPC500PC-0460-C-OMCPC600
PC-0510-C-CHC050PC-0515-C-CHC075PC-0520-C-CHC100PC-0525-C-CHC100PC-0530-C-CHC150PC-0535-C-CHC200PC-0540-C-CHC250PC-0545-C-CHC300PC-0550-C-CHC400PC-0555-C-CHC500PC-0560-C-CHC600
Nominal Pipe Size
Nominal Pipe Size
Thickness& Width
Thickness& Width
Outside Diameter
Outside DiameterEMT Rigid
Load Capacity
Load Capacity
Side Bolt
In
In
mm
mm
mm
mm
KN
KN
mm
mm mm
mmPart No.
Part No.
15
Pipe
Cla
mps
Two-Hole Pipe Strap/ U-Clip- Material: Steel S235- Service: Designed for supporting pipe runs on walls and on C-Channels- Finish: Electro Zinc Plated
Pipe Strap
HOD
T
W
NPS: Nominal Pipe Size - OD: Outside Diameter - T-W: Thickness - Width H: Hole Size
2228354254607590
1/23/41
5/43/22
5/23
1.5x251.5x251.5x251.5x251.5x252.0x302.0x302.0x40
1.301.301.301.301.301.901.901.90
66666888
1520253240506580
- Material: Steel S235- Service: Designed for supporting standard conduits, cable and steel pipes on walls or sides of beams or on C-Channels- Finish: Electro Zinc Plated Not recommended for use horizontally on ceilings, bottoms of beams and similar installations since the factor of safety is greatly reduced when so used
One-Hole Pipe Strap <Snap Type>
NPS
WH
T
1520253240506580
1/23/41
5/43/22
5/23
1.0x251.0x251.0x251.5x251.5x251.5x252.0x252.5x25
0.400.400.400.400.400.400.450.45
66666888
PC-0510-C-PSUC050PC-0515-C-PSUC075PC-0520-C-PSUC100PC-0525-C-PSUC150PC-0530-C-PSUC200PC-0535-C-PSUC250PC-0540-C-PSUC300PC-0545-C-PSUC350
PC-0610-C-PSST050PC-0615-C-PSST075PC-0620-C-PSST100PC-0625-C-PSST150PC-0630-C-PSST200PC-0635-C-PSST250PC-0640-C-PSST300PC-0645-C-PSST350
Load Capacity
Load Capacity
Nominal Pipe Size
Hole SizeOutside Diameter
Load CapacityThickness& Width
In mm mm KNmm mmPart No.
Hole Size Load Capacity
In mm mm KNmmPart No.
Nominal Pipe Size
Thickness& Width
BSizeDimension
A C
16
Pipe
Cla
mps
- Material: EPDM. Rubber- Load Data: At normal frequency and pressure range, noise suppression 20 dB(A) & the temperature-resistant from-40 °C to + 100 °C- Electrical values: Specific resistance: 2x109 M ohm cm2 & the Surface resistance: 2 x109 M ohm
Noise Suppression ProfileSR noise-suppression strip for insertion in clamps and hangers
Rubber DIN 4109
RSHanger rod not included
CL
TH
Lower Yoke
Upper Yoke
- Material: Steel S235- Finish: Electro Zinc Plated or Hot-dip Galvanized - Application: Designed for suspending pipes
Clevis Hanger
CL: Center Line - H: Height - T: Transverse
20x6 3 206Part No.PC-0005-C-RNS
BC
A
mm mm mm mm
1/23/41
5/43/22
5/23456
M10M10M10M10M10M10M12M12M16M16M20
66666688
101012
445458808186
106127141159174
556875
100106117144172199229257
2.702.702.702.702.702.705.005.006.306.308.50
3x253x253x253x253x253x253x303x304x304x304x40
1520253240506580
100125150
PC-0710-C-CLH050PC-0715-C-CLH075PC-0720-C-CLH100PC-0725-C-CLH100PC-0730-C-CLH150PC-0735-C-CLH200PC-0740-C-CLH250PC-0745-C-CLH300PC-0750-C-CLH400PC-0755-C-CLH500PC-0760-C-CLH600
Nominal Pipe Size
HeightRod Size
Thickness & Width
Load CapacityCenter Line
In mm mm mm mm KNmm mmPart No.
Transverse
17
Pipe
Cla
mps
& H
ange
rs
- Material: Steel S235- Finish: Electro Zinc Plated or Hot-dip Galvanized - Application: Designed for suspending non-insulated stationary pipe line. Knurled nut can be supplied in 8 to 10 mm diameter
Adjustable Band Hanger
Swivel Hangers with rubber gasketscan be supplied also.
H
Knurled Nut
RSHanger rod not included
T-W: Thickness - Width
0.300.300.300.300.300.300.600.600.601.101.10
1/23/41
5/43/22
5/23456
M8M8M8M8M8M8
M10M10M10M10M10
5464728396
113130156215242279
1.0x251.0x251.2x251.2x251.2x251.2x251.2x251.2x251.2x252.0x252.0x25
1520253240506580
100125150
--- MaterialMaterialMaterial: : : Steel Steel Steel S235S235S235--- ServiceServiceService: : : Designed for supporting and stabilizing Designed for supporting and stabilizing Designed for supporting and stabilizing vertical pipe runs vertical pipe runs vertical pipe runs--- FinishFinishFinish: : : Electro Zinc Plated or Hot-dip GalvanizedElectro Zinc Plated or Hot-dip GalvanizedElectro Zinc Plated or Hot-dip Galvanized
Offset Pipe Clamp
AB
Hole
Size
TW
T W
C
10101010121212141414
3x303x303x303x30
4.5x304.5x304.5x305x405x405x40
60606575808595
105130160
1/23/41
5/42
5/23468
150175190200225250275300400450
8x408x408x408x40
10x5010x5010x5012x5012x5012x50
0.900.900.900.901.201.201.201.801.801.80
15202532506580
100150200
PC-0810-C-ADBH05008PC-0815-C-ADBH07508PC-0820-C-ADBH10008PC-0825-C-ADBH12508PC-0830-C-ADBH15008PC-0835-C-ADBH20008PC-0840-C-ADBH25010PC-0845-C-ADBH30010PC-0850-C-ADBH40010PC-0855-C-ADBH50010PC-0860-C-ADBH60010
PC-0910-C-OFFP050PC-0915-C-OFFP075PC-0920-C-OFFP100PC-0925-C-OFFP125PC-0930-C-OFFP200PC-0935-C-OFFP250PC-0940-C-OFFP300PC-0945-C-OFFP400PC-0950-C-OFFP600PC-0955-C-OFFP800
Nominal Pipe Size
Thickness& Width
Rod Size Load CapacityHeight
In mm mm KNmm mmPart No.
Nominal Pipe Size
A C Thickness & Width
B Hole Size
In mm mm mm mmmm mmPart No.
Load Capacity
KN
18
- Material: Malleable Cast Iron Zinc plated
Casting tolerance according to DIN 1684 GTA/17 with hexagon head screw DIN 933 8.8, threaded end with cup point according to EN ISO 4753 and locknut DIN 439 for sprinkler systems, heating, ventilation and air conditioning, acoustic tubes and sanitary installation machines and steel constructions.Safety Factor
C-Clamp
Beam Clamps offered in this section are designed to provide attachment of hanger rods to structures without drilling or welding. A wide range of types and sizes are available for various applications.
Beam Clamps
A
F
D
GC
B
E
H
202129233530
3535414148
55.5
M8M8
M10M10M10M12
171823202628
3638504458
58.3
1.11.22.52.53.55.5
353545425458
M6 ø7M8 ø9M8 ø9
M10 ø11M12 ø13M16 ø17
19192121
23.529.5
Beam
Cla
mps
A B C D E F G H Load Capacity
The Load Data the Load data includes a safety factor of 4, (safety factor = ratio of ultimate load divided to the design Load : Safety factor 4:1
Part No.PC-1105-C-MCC06PC-1110-C-MCC08PC-1115-C-MCC08PC-1120-C-MCC10PC-1125-C-MCC12PC-1130-C-MCC16
mm mm mm mm mm mm mm mm KN
Beam
Cla
mps
19
- Material: Steel S235- Service: Designed for attaching hanger rods to the top or bottom flange of a beam- Finish: Hot-dip Galvanized- Ordering: Specify flange width and thickness- Steel Size: 5X30 mm
Steel Beam Clamp Open
TxW
Bolt Size
Bolt and Nut included
(Center of bolt to bottom of beam flange)
AC
B
- Material: Steel S235- Service: Designed for attaching hanger rods to the top or bottom flange of a beam- Finish: Hot-dip Galvanized- Ordering: Specify flange width and thickness- Steel Size: 5X30 mm, 5X40 mm
- Material: Steel S235- Service: Designed for attaching C-Channel to a top or bottom flange of a beam- Finish: Electro Zinc Plated- Steel Size: 6x90 mm
Steel Beam Clamp Closed
Window Beam Clamp
TxW
B
Bolt and Nut included RS(rod size)Hanger rod not included
(Center of cross bolt to bottom of side ofhanger rod nut)
C
12x40
45
6 90
90
PC-1160-C-SBCO0530
PC-1170-C-SBCC0530Part No.
Part No.
20
21Th
e Su
ppor
ting
Syst
ems
* IMPORTANT NOTE For more information on Uni-Channel Systems , Uni-Metal technical staff will be ready to assist you with all necessary details. www.unimetal-ikk.com
SFSP is a leading manufacturer and fabricator of steel and aluminum products used for the support of equipments for industrial, commercial, utility and OEM installations. Our customers have access to the most complete support systems offered in the industry including metal framings, cable trays, pipe hangers, slotted angles, fasteners and others.
CCH 320 3 2 0
Channel Patterns0 - PT 1 - ST2 - B2B
Size2 - 21/41 mm 4 - 41/41 mm
Material Thickness2 for 1.5 mm3 for 2.0 mm 4 for 2.5 mm
ChannelSFSP’s metal framing channel is cold formed on modern rolling machines from low carbon steel manufactured according to BS 6949:1988. A continuous slot provides the ability to make attachments at any point.
LengthsStandard length: 3000mm with ± 3.2mm length tolerance. Custom lengths are available upon request.
FinishesStandard Finishes: Pre-Galvanized finish (ASTM A653M coating G90 and G60). Hot Dip Galvanized after fabrication (ASTM A123 or BSEN ISO1461:1999) . Other custom coatings are available upon request.
Z
Z
YY
Z
Z
YY
Z
Z
YY
Z
Z
Y Y
21.07.0
41.0
21.0
41.0
22.0
42.0
7.0
41.0
22.0
41.0
7.0
41.0
41.0
41.0
22.0
82.0
7.0
41.0
22.0
50
30
13
Z
Z
YY
Z
Z
YY
Z
Z
YY
Z
Z
Y Y
21.07.0
41.0
21.0
41.0
22.0
42.0
7.0
41.0
22.0
41.0
7.0
41.0
41.0
41.0
22.0
82.0
7.0
41.0
22.0
50
30
13
Z
Z
YY
Z
Z
YY
Z
Z
YY
Z
Z
Y Y
21.07.0
41.0
21.0
41.0
22.0
42.0
7.0
41.0
22.0
41.0
7.0
41.0
41.0
41.0
22.0
82.0
7.0
41.0
22.0
50
30
13
Z
Z
YY
Z
Z
YY
Z
Z
YY
Z
Z
Y Y
21.07.0
41.0
21.0
41.0
22.0
42.0
7.0
41.0
22.0
41.0
7.0
41.0
41.0
41.0
22.0
82.0
7.0
41.0
22.0
50
30
13
Z
Z
YY
Z
Z
YY
Z
Z
YY
Z
Z
Y Y
21.07.0
41.0
21.0
41.0
22.0
42.0
7.0
41.0
22.0
41.0
7.0
41.0
41.0
41.0
22.0
82.0
7.0
41.0
22.0
50
30
13
Channel Hole Patterns
Selection Chart
PT Type Channel ST Type Channel B2B Type Channel
Part No. Channel Dimensions Thickness
Height “H” Width “W”
CCH - 220/221 21.0 mm 41.0 mm 1.5 mm
CCH - 240/241 41.0 mm 41.0 mm 1.5 mm
CCH - 320/321 21.0 mm 41.0 mm 2.0 mm
CCH - 340/341 41.0 mm 41.0 mm 2.0 mm
CCH - 420/421 21.0 mm 41.0 mm 2.5 mm
CCH - 440/441 41.0 mm 41.0 mm 2.5 mm
Part No. Thick. mm.
Height “H”
CCH-220 1.5 21.0
CCH-240 1.5 41.0
CCH-320 2.0 21.0
CCH-340 2.0 41.0
CCH-420 2.5 21.0
CCH-440 2.5 41.0
Part No. Thick. mm.
Height “H”
CCH-221 1.5 21.0
CCH-241 1.5 41.0
CCH-321 2.0 21.0
CCH-341 2.0 41.0
CCH-421 2.5 21.0
CCH-441 2.5 41.0
Part No. Thick. mm.
Height “H”
CCH-222 1.5 42.0
CCH-242 1.5 82.0
CCH-322 2.0 42.0
CCH-342 2.0 82.0
CCH-422 2.5 42.0
CCH-442 2.5 82.0
PT Plain Type ST Slotted Type B2B Type
The
Supp
ortin
g Sy
stem
s
22
Metal Framing Channels
The
Supp
ortin
g Sy
stem
s
23
Given Loads are always in [kN] “ Allowable characteristic live load “* IMPORTANT NOTE
CCH421 41x21x2.5
A
A
Base plate: height (h) x width (b) x thickness (t) 140 50 10 - In the case of concrete support, use anchor M16.- In the case of C-channel frame, use bolt and spring M8.
** Connection force (pull out force) : 7.5 (KN)
F1
1/2 A 1/2 A
or F2
Length A (mm)
h
2525
h-50
b t
Fz
FD
Fv =F1 or F2
CCH441 41x41x2.5
Base plate: height (h) x width (b) x thickness (t) 120 50 8
- In the case of concrete support, use anchor M10.- In the case of C-channel frame, use bolt and spring nut M8.
** Connection force (pull out force) : 3.1 (KN)
Length Allowable Load
A (mm) F1* F2* F**150 1.10 0.60 3.10
300 0.60 0.30 3.10
450 0.40 0.20 3.10
600 0.30 0.10 3.10
700 0.20 0.10 3.10
800 0.20 0.10 3.10
900 0.20 0.10 3.10
1000 0.20 0.10 3.10 3.10
Cantilever Arm Brackets - SCA
Length Allowable Load
A (mm) F1* F2* F**150 3.10 1.50 7.50
300 1.50 0.80 7.50
450 1.00 0.50 7.50
600 0.80 0.40 7.50
700 0.70 0.30 7.50
800 0.60 0.30 7.50
900 0.50 0.30 7.50
1000 0.50 0.20 7.50
24
The
Supp
ortin
g Sy
stem
s
Given Loads are always in [kN] “ Allowable characteristic live load “* IMPORTANT NOTE
A
Base plate: height (h) x width (b) x thickness (t) 140 50 10
- In the case of concrete support, use anchor M12.- In the case of C-channel frame, use bolt and spring nut M8.
** Connection force (pull out force) : 4.8 (KN)
CCH422 41x21x2.5 B2B
A
F1
1/2 A 1/2 A
or F2
Length A (mm)
h
b t
2525
h-50
FD
Fv =F1 or F2
Fz
CCH442 41x41x2.5 B2B
Base plate: height (h) x width (b) x thickness (t) 180 60 12
In the case of concrete support, use anchor M16.In the case of C-channel frame, use spring nut M10.
** Connection force (pull out force) : 8.3(KN)
Length Allowable Load
A (mm) F1* F2* F **150 2.50 1.30 4.80
300 1.30 0.60 8.48
450 0.80 0.40 4.80
600 0.60 0.30 4.80
700 0.50 0.30 4.80
800 0.50 0.20 4.80
900 0.40 0.20 4.80
1000 0.40 0.20 4.80
Length Allowable Load
A (mm) F1* F2* F**150 7.00 3.50 8.30
300 3.50 1.80 8.30
450 2.30 1.20 8.30
600 1.80 0.90 8.30
700 1.50 0.80 8.30
800 1.30 0.70 8.30
900 1.20 0.60 8.30
1000 1.10 0.50 8.30
Cantilever Arm Bracket B2B - SCA
25
THREADEDACCESSORIES
- Material: For maximum loading design, carbon steel is used in the manufacturing of threaded accessories. Stainless steel and other material are available.
- Finish: Standard finishes are plain steel and Electro Plated zinc (ASTM B633 SCI) (BS 1706)
- Load Data: The load data published includes a safety of 5.0 unless noted (safety factor = ratio of ultimate load to the design load) .
Accessories offered in this section are designed to reduce installation time.
505060606075
50 5060707590
Thre
aded
Acc
esso
ries
26
- Material: Steel S235- Service: Designed for use as an anchor embedded in concrete- Finish: Electro Zinc Plated
Anchor Bolts
Radius
Radius
Size
Length
Specify L
Size
Length
Specify L
101216202225
* IMPORTANT NOTE Other sizes are available on special order.
- Material: Steel S235- Service: Designed for attaching to beam flange or purlin and as a concrete insert- Finish: Electro Zinc Plated
J - Bolt
L - Bolt
101216202225
505060606075
13.016.019.022.125.135.0
1.001.903.104.606.507.00
1.001.903.104.606.507.00
LengthSizemm mm mm KN
RadiusThread
Load CapacityPart No.
PC-1220-C-JB1050PC-1225-C-JB1250PC-1230-C-JB1660PC-1235-C-JB2060PC-1240-C-JB2260PC-1245-C-JB2575
PC-1320-C-AB1050PC-1325-C-AB1250PC-1330-C-AB1660PC-1335-C-AB2060PC-1340-C-AB2260PC-1345-C-AB2575
LengthSizemm mm mm KN
RadiusThread
Load CapacityPart No.
Thre
aded
Acc
esso
ries
27
- Material: Steel S235- Finish: Electro Zinc Plated - Application: Designed as a support, guide, or anchor for light - duty pipes
Light Duty U - Bolt
- Material: Steel S235- Finish: Electro Zinc Plated - Application: Designed for use in hanger supports to eliminate possible bending of threaded rod
Eye Rod
Radius
OutsideDiameter
Size
Size
Eye ID
Length
Length
Hex Nuts included
Specify L
20303030353535405050
66666688
1012
2228354350617892
116170
0.400.400.400.40 0.40 0.400.900.901.002.00
40405050507590
100115130
8101216202225283034
68
1012162022252830
0.500.801.002.003.104.706.508.60
10.8014.00
1/23/41
5/43/22
5/2346
1520253240506580
100150
PC-1410-C-LDUB05006PC-1415-C-LDUB07506PC-1420-C-LDUB10006PC-1425-C-LDUB12506PC-1430-C-LDUB15006PC-1435-C-LDUB20006PC-1440-C-LDUB25008PC-1445-C-LDUB30008PC-1450-C-LDUB40010PC-1455-C-LDUB60012
PC-1510-C-ERD0608PC-1515-C-ERD0810PC-1520-C-ERD1012PC-1525-C-ERD1216PC-1530-C-ERD1620PC-1535-C-ERD2022PC-1540-C-ERD2225PC-1545-C-ERD2528PC-1550-C-ERD2830PC-1555-C-ERD3034
0.21 cm2
0.37 cm2
0.57 cm2
0.83 cm2
1.13 cm2
1.47 cm2
2.3 cm2
In mm mmmm mm KN
Nominal Pipe Size
Load CapacitySize Length
OutsideDiameter
Thread
Part No.
mm mmmm KNLoad CapacitySize Length Eye
Thread
Part No.
Thre
aded
Acc
esso
ries
28
Hex Head Cap Screw
- Available in Zinc Plated Dimension & Stainless Steal Dimension Hex Head Bolts used in combination with channel nuts.
- Available in Zinc Plated Thread & Stainless Steel Thread
- Material: Grade 4.6- Finish: Electro Zinc Plated - Application: Designed as per DIN 933/ EN 24017
- Material: Steel S235- Finish: Electro Zinc Plated
TurnbuckleBuckle
68
10121620222525252525
Rod SizeHanger Rod not included
Tool
Size
6 ’’(152.4)
3’’ (76.2)Rod
Take Out
PC-1605-C-TBKL06PC-1610-C-TBKL08PC-1615-C-TBKL10PC-1620-C-TBKL12PC-1625-C-TBKL16PC-1630-C-TBKL20PC-1635-C-TBKL22PC-1640-C-TBKL25PC-1645-C-TBKL25PC-1650-C-TBKL25PC-1655-C-TBKL25PC-1660-C-TBKL25
Screws
mmRod Size
Part No.
M6x12M6x25M8x25 M8x40
M10x20M10x30M10x45M10x60M10x70M12x22M12x25M12x30M12x40M12x50M12x60M12x80M12x90M16x40M16x60M16x90
1010131317171717171919191919191919242424
1010131316161616161818181818181818242424
mm mm mmSize DIN
Tool SizeEN
29
Square Head Cone Point Set Screw
Thre
aded
Acc
esso
ries
Slotted Hex HeadMachine Screw
Slotted Round Head Machine Screw
Slotted Flat Head Machine Screw
Coach Screw
10x4010x5012x4012x50
mmSize
6x206x306x408x308x40
10x3010x40
mmSize
6x206x306x408x308x40
10x2010x3010x4010x5010x60
mmSize
M8x90 M10x120
mmSize
6x208x25
10x4010x5010x6012x3012x40
mmSize
Thre
aded
Acc
esso
ries
30
Threaded Rods
- Available in Zinc Plated Thread & Stainless Steal Thread
Rod Coupling
Threaded Rod
Size
LengthLengthLength
- Available in Electroplated Thread & Stainless Steel Thread
- Material: Forged Steel, Grade 4.6- Finish: Electro Zinc Plated- Application: Designed as per DIN 975
M6M8
M10M12M16M20
2.04.06.09.0
17.027.0
152025304050
mm mm KNSize Length Load Capacity
M6M6M6M8M8M8
M10M10M10M12M12M12M14M14M14M16M16M16M20M20M20
123123123123123123123
4.04.04.08.08.08.0
12.012.012.018.018.018.024.024.024.034.034.034.053.053.053.0
Dmm mm KNSize Length Load Capacity
Thre
aded
Acc
esso
ries
31
D: Outside Diameter - d: Inside Diameter - T: Thickness
Round Washer
Washers
- Application: Designed as per DIN 975
S
m
S
d
D
S
d
D
Zinc PlatedThread - ZP
Zinc Platedfor bolt - ZP
Zinc PlatedDimension- ZP
D
[mm]
D
[mm]
S/mDIN
[mm]
SDIN
[mm]
S/mISO
[mm]
SEN
[mm]
e
[mm]
d
[mm]
d
[mm]
s
[mm]
s
[mm]
Length
[mm]
Load
cap.
[kN]
Threaded Rods, Hexagon Head Bol ts, Nuts, Washers
FR AMI NG SY STEM S ACC ESSORI ES
Order Example : TR - ZP - M 12 × 1000
Order Example : HB - ZP - M 12 × 1000
Order Example: WA - ZP - M 12 - DIN 9021
Order Example: WA - ZP - M 12 - DIN 125
DIN
22
24
30
45
37
50
12
16
21
24
30
10/ 5
13/6,5
17/ 8
19/10
24/13
10
13
17
19
24
18
24
10
13
16
10/ 6
13/7,5
16/ 9,5
18/12
24/15,5
11,5
15,0
19,6
21,9
27,7
6,6
8,4
10,5
13,5
13
17
6,4
8,4
10,5
13
17
2
2
2,5
4
3
3
1,6
1,6
2
2,5
3
1000
1000
1000
1000
1000
2,2
4,0
6,4
12,9
17,3
M 6
M 8
M 10
M 12
M 16
M 6 x 12
M 6 x 25
M 8 x 25
M 8 x 40
M 10 x 20
M 10 x 30
M 10 x 45
M 10 x 60
M 10 x 70
M 12 x 22
M 12 x 25
M 12 x 30
M 12 x 40
M 12 x 50
M 12 x 60
M 12 x 80
M 12 x 90
M 16 x 40
M 16 x 60
M 16 x 90
M 8 x 25
M 10 x 30
M 10 x 45
M 12 x 25
M 12 x 30
M 12 x 40
M 12 x 60
M 12 x 80
M 16 x 40
M 16 x 60
M 16 x 90
M 6
M 8
M 10
M 12
M 16
M 6
M 8
M 10
M 12
M 16
440
9021
9021
440
9021
9021
M 6
M 8
M 10
M 12
M 12
M 16
M 6
M 8
M 10
M 12
M 16
M 8
M 10
M 12
M 16
M 6
M 8
M 10
M 12
M 16
M 6
M 8
M 10
M 12
M 16
Stainless SteelThread
Zinc PlatedThread - ZP
Stainless SteelThread
Stainless Steelfor bolt
Zinc Platedfor bolt - ZP
Stainless Steelfor bolt
Stainless SteelDimension
Material & Finishes Codes
( S. 53)
= h.d. galvanised, strength grade 4.6
= electroplated, 4.6
= , 8.8
= Stainless steel grade A4-50
strength grade
h.d. galvanised strength grade
= electroplated, strength grade 8.8
= Stainless steel grade A4-70
= Stainless steel grade A2-50
= Stainless steel grade A2-70
= Stainless steel W1.4529 HCR-50
fv
gv
fv 8.8
A4-50
gv 8.8
A4-70
A2-50
A2-70
HCR
e
S
- Material: Forged Steel- Finish: Zinc-Plated for Bolt and Stainless Steel for washers
Hex Nut
- Available in Zinc Plated Thread & Stainless Steel Thread
Nuts
- Application: Designed as per DIN 934/ ISO 4032 (DIN EN 24032)
- Material: Forged Steel- Finish: Zinc-Plated
E
Tool
Size
T
M
M6M8
M10M12M16
1216212430
6.48.4
10.51317
1.61.62.02.53.0
dmm mm mm mmSize
Outside Diameter
Inside Diameter Thickness
M6M8
M10M12M16
10/ 513/ 6.517/ 8
19/ 1024/ 13
10/ 613/ 7.517/ 9.519/ 12
24/ 15.5
11.515.019.621.927.7
mm mm mm mmSize S/M(DIN)
Tool SizeS/M(EN) E
32
TECHNICAL DATA
TECHNICAL DATA
Tech
nica
l Dat
a
34
Rigid Steel Conduit (Heavy Wall Conduit)
Pipe Comparison Data
Nominal Pipe Size Outside Diameter
1420253038
44.557
76.188.9
101.6108133159216267318368419459521622720820920
1020
17.221.326.933.742.448.360.376.188.9
101.6114.3139.7168.3219.1273.0323.9355.6406.4457.2508.0609.6711.2812.894.4
1016.0
Nominal Conduit Size Outside Diameter Nominal Inside Diameter
Minimum Weightwith Couplings
Attached
3/8
1/2
3/4
1
5/4
3/2
2
5/2
3
7/2
4
5
6
0.670.841.051.311.661.902.372.873.504.004.505.566.62
51.579.0
105.0153.0201.0249.0332.0527.0682.6831.0972.3
1313.61745.3
17.121.326.733.442.248.360.373.088.9
101.6114.3141.3168.3
7.811.615.823.130.437.650.279.7
103.2125.6147.0198.6263.9
0.49
0.63
0.83
1.06
1.39
1.62
2.08
2.48
3.09
3.57
4.05
5.07
6.09
10
15
20
25
32
40
50
65
80
90
100
125
150
12.5
16.0
21.3
27.0
35.4
41.3
52.9
63.2
78.5
90.7
102.9
128.9
154.8
In In In Lbs/100 Ft.mm mm mm Kg/10 m
3/8
1/2
3/4
1
5/4
3/2
2
5/2
3
7/2
4
5
6
8
10
12
14
16
18
20
24
28
32
36
40
In10
15
20
25
32
40
50
65
80
90
100
125
150
200
250
300
350
400
450
500
600
700
800
900
1000
mm DIN(mm) ISO(mm)
Tech
nica
l Dat
a
Pipe Comparison Data
35
Electrical Metallic Tubing (EMT)Thinwall Conduit
Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code. Rigid and Inter-mediate Metal Conduit shall be supported at least every 10 feet (3.05m) and within 3 feet (914mm) of each outlet box, junction box, cabinet, or fitting. Except for straight runs of conduit connected with couplings which may be support-ed in accordance with NEC Article 345 and 346, provided such supports prevent transmission of stresses to termination where conduit is deflected between supports.
Conduit plus weight of heaviest conductor combi-nation as specified by the National Electrical Code. Electrical Metallic tubing shall be supported at least every 10 feet and within 3 feet (914mm) of each out-let box, junction box, cabinet, or fitting. See NEC Ar-ticle 348.
In Feetmm MetersConduit Size
Maximum Support Span
1/2 - 3/41
5/4 - 3/22 - 5/23 - 6
15 - 20 25
32 - 40 50 - 65 80 -150
3.00 3.60 4.30 4.90 6.00
1012141620
Intermediate Metal Conduit (IMC)
In In In Lbs/100Ft.mm mm mm Kg/10 m
Nominal Conduit Size Outside Diameter Nominal Inside Diameter
Minimum Weightwith Couplings
Attached
1/23/41
5/43/22
5/23
7/24
0.740.951.201.551.792.262.723.343.844.33
152025324050658090100
18.924.230.638.945.557.569.285.097.5
110.1
0.811.021.291.631.882.362.853.473.974.46
60.082.0
116.0150.0182.0242.0401.0493.0573.0638.0
20.726.132.741.647.859.972.588.3
100.8113.4
0.712.417.522.627.336.560.674.586.696.4
Nominal Conduit Size Outside Diameter Nominal Inside Diameter
Minimum Weightwith Couplings
Attached
3/81/23/41
5/43/22
5/23
7/24
0.490.620.821.041.381.612.062.733.353.834.33
10152025324050658090100
12.515.820.926.635.140.952.569.485.297.4
110.1
0.570.700.921.161.511.742.192.873.504.004.50
23.028.543.564.095.0
110.0140.0205.0250.0325.0370.0
14.717.923.429.538.344.255.873.088.9
101.6114.3
3.44.36.59.6
14.316.621.131.037.849.155.9D
imen
sions
take
n fro
m A
NSI
C80
.3-1
977
In In In Lbs/100 Ft.mm mm mm Kg/10m
Tech
nica
l Dat
a
36
Rigid Aluminum Conduit
Conduit plus weight of heaviest conductor combination as specified by the National Electrical Code. Aluminum Rigid Conduit shall be supported at least every 10 feet (3.05m) and within 3 feet (914mm) of each outlet box, junction box, cabinet, or fitting. Except for straight runs of conduit connected with couplings which may be supported in accordance with NEC Table 346-12, provided such supports prevent transmission of stresses to termination where conduit is deflected between supports.
In Feetmm Meters
Conduit Size Maximum Support Span
1/2 - 3/41
5/4 - 3/22 - 5/23 - 6
15 - 20 25
32 - 40 50 - 65 80 -150
3.00 3.60 4.30 4.90 6.00
1012141620
In In In Lbs/100 Ft.mm mm mm Kg/10m
Nominal Conduit Size Outside Diameter Nominal Inside Diameter
Minimum Weightwith Couplings
Attached
1/23/41
5/43/22
5/23
7/2456
Dim
ensio
ns ta
ken
from
AN
SI C
80.5
-197
7.
152025324050658090
100125150
16.121.227.035.441.252.963.278.590.7
102.9128.9154.8
0.630.831.061.391.622.082.483.093.574.055.076.09
0.841.051.311.661.902.372.873.504.004.505.566.62
21.326.733.442.248.360.373.088.9
101.6114.3141.3168.3
27.436.453.069.682.2
115.7182.5238.9287.7340.0465.4612.5
5.312.417.522.627.536.560.674.586.651.470.392.6
Tech
nica
l Dat
a
Rigid Aluminum Conduit
37
Schedule 40 PVC Plastic Pipe
1/81/43/81/23/41
5/43/22
5/23
7/245681012
Nominal Conduit Size Outside Diameter Nominal Inside Diameter
Minimum Weightwith Couplings
Attached
36
10152025324050658090
100125150200250300
0.260.360.490.620.821.041.381.612.062.463.063.544.025.046.067.98
10.0211.93
6.89.2
12.515.820.926.635.140.952.562.777.990.1
102.3128.2154.1202.7254.5303.2
0.400.540.670.841.051.311.661.902.372.873.504.004.505.566.628.62
10.7512.75
10.313.717.121.326.733.442.248.360.373.088.9
101.6114.3141.3168.3219.1273.1323.9
4.78.2
10.916.421.832.143.451.869.5
109.6143.5175.6204.3281.7360.9545.3791.3
1035.2
0.71.21.62.43
4.86.57.810.316.521.726.530.942.654.582.4
119.6156.5
In In In Lbs/100 Ft.mm mm mm Kg/10 m
Copper Tubing, Type L
In In In Lbs/100 Ft.mm mm mm Kg/10 m
Nominal Conduit Size Outside Diameter Nominal Inside Diameter
Minimum Weightwith Couplings
Attached
3/81/23/41
5/43/2 2
5/23
7/2456810121416182024
10152025324050658090100125150200250300350400450500600
0.490.620.821.041.381.612.062.463.063.544.025.046.06
10.027.98
12.0013.2515.2517.2019.2523.25
12.515.820.926.635.140.952.562.777.990.1
102.3128.2154.1202.7254.5304.8336.6387.4438.2489.0590.6
0.670.841.051.311.661.902.372.873.504.004.505.566.628.62
10.7512.7514.0016.0018.0020.0024.00
17.121.326.733.442.248.360.373.088.9
101.9114.3141.3168.3219.127.1
323.1355.6406.4457.2508.0609.6
57.085.0
113.0168.0227.0272.0365.0579.0758.0911.0
1079.01462.01897.02855.04048.04956.05457.06258.07059.07860.09462.0
8.612.817.126.034.341.155.287.5114.6137.6163.1221.0286.8431.6612.0749.3825.1946.2
1067.31188.41430.6
38
Malta
Birmingham
Khartoum
Unite
ch L
ocat
ions
/ Ex
istin
g &
Up-
Com
ing
40
Existing Locations
Kingdom of Saudi ArabiaUnited Arab Emirates
QatarBahrainJordanEgypt
LebanonGermany
ChinaOman Libya
KuwaitUK
Yemen
MoroccoDjiboutiNigeriaKazakhstanTunisiaMaltaFranceAustraliaNew ZealandIranSudanIraqEquatorial GuineaGabonAngolaNamibiaBotswana
Upcoming Locations
Malta
Birmingham
Khartoum
A major strategic decision taken by Unitech in 2001 was to aggres-sively expand in more and more markets all over the Kingdom of Saudi Arabia and abroad.
Unitech today has an extensive presence through 70 locations in 40 cities distributed among 14 countries; our operations incorporate: 36 sales offices and showrooms, 5 factories, 22 warehouses and 7 vari-ous outlets.
4242
43
ETAL
www.ikkgroup.comwww.unitech-ikk.comwww.unimetal-ikk.comwww.unipro-ikk.comwww.unitedpowerfix.comwww.betacontech.comwww.dynamiktools.comwww.sfsp-ikk.com
www.multid-ikk.com
Fo r more i n fo rm a t io n - V i s i t t hese webs i te s :
Unite
ch C
ompa
nies
Conv
ersi
on T
able
44
m: meter
cm: centimeter
mm: mellimeter
μm: micrometer
Metric Symbols
Metric Conversion ChartDimensions taken from ASTM A53-82
1 cubic ft. of water weighs 62.41 Lbs
1 cubic meter of water weighs 999.972 Kg.
1 gallon (U.S) weighs 8.335 Lbs.
1 Liter weighs .999 Kg.
Defl.: Deflection
S.F.: Safety Factor
Ft.: Feet
Pre-galv: Pre-galvanized Steel
K Factor: Deflection divided
by loads in LBS/FT
o.c.: On Center
PVC: Poly Vinyl Chloride
In: Inch
psi: Pound per Square Inch
kg: Kilogram
N: Newton
KN: Kilonewton
Pa: Pascal
MPa: Megapascal
Abbreviations
Foot2
Inch2
sq centimeter (cm2)
square meter (m2)
square meter (m2)
square meter (m2)
foot (ft)
inch (in)
inch (in)
meter (m)
meter (m)
micrometer (μm)
foot3
inch3
cubic centimeter (cm3)cubic meter (m3)cubic meter (m3)gallon (U.S. liquid)
section modulus S (in3)moment of inertia I (in4)modulus of elasticity E (psi)section modulus S (m3)moment of inertia I (m4)modulus of elasticity E (Pa)
lbf/ in2 (psi)kip/ in2 (ksi)lbf/ in2 (psi)pascal (Pa)pascal (Pa)megapascals (MPa)
N/ mm2
N/ mm2
megapascals (MPa)
N/ mm2
kip per square inch (ksi)
lbf/ in2 (psi)
6.894757 * 10+9
6.894757 * 10+12
6.894757 * 10-3
1.019350 * 10-6
1.450377 * 10-7
1.450377 * 10+2
lb/ ft3
lb/ in3
kg/ m3
kg/ m3
lbs/ ft3
kilogram per cubic meter (kg/ m3)
kilogram per cubic meter (kg/ m3)
lb/ft3
lb/in3
lbs/in3
1.601846 * 10+1
2.767990 * 10+4
6.242797 * 10-2
3.612730 * 10-5
1.728000 * 10+3
lbf . ft
lbf . in
N . m
N . m
ounce (avoirdu pois)pound (avoirdu pois)kilogram (kg)kilogram (kg)
lb/ ftlb/ inkg/ mkg/ m
kilogram per meter (kg/ m)
kilogram per meter (kg/ m)
lb/ft
lb/in
1.488164
1.785797 * 10+1
6.719689 * 10-1
5.599741 * 10-1
kilogram (kg)
kilogram (kg)
ounce (avoirdu pois)
pound (avoirdu pois)
2.834952 * 10-2
4.535924 * 10-1
3.527396 * 10+1
2.204622
newton meter (N . m)
newton meter (N . m)
lbf . ft
lbf . in
1.355818
1.129848 * 10-1
7.375621 * 10-1
8.850748
S (m3)
I (m4)
E (Pa)
S (in3)
I (in4)
E (psi)
1.638706 x 10-5
4.162314 x 10-7
6.894757 x 10+3
6.102374 x 10+4
2.402510 x 10+6
1.450377 x 10-4
cubic meter (m3)
cubic meter (m3)
cubic inch (in3)
foot3
inch3
cubic meter (m3)
2.831685 x 10-2
1.638706 x 10-5
6.102374 x 10-2
3.531466 x 10+1
6.102376 x 10+4
3.785412 x 10-3
meter (m)
meter (m)
micrometer (μm)
foot (ft)
inch (in)
inch (in)
3.048000 x 10-1
2.540000 x 10-2
2.540000 x 10+4
3.280840
3.937008 x 10+1
3.937008 x 10-5
degree Fahrenheit
degree Celsius
pounds-force (lbf) newtons (N) 4.448222 x 10°
degree Celsius
degree Fahrenheit
t°C = (t°F 32)/1.8
t°F = 1.8 t°C +32
square meter (m2)
square meter (m2)
square meter (in2)
foot2
inch2
circular mil
9.290304X10-2
6.451600 x 10-4
1.550003 x 10-1
1.076391 x 10+1
1.550003 x 10+3
1.973523 x 10+9
Temperature
Force
Length
Volume
Section Properties
Bending Moment or Torque
Mass
Mass Per Unit Length
Mass Per Unit Area
Pressure or Stress
Mass Per Unit Volume
lb/ft2
kg/m2
kilogram per square meter (kg/ m2)
pound per square foot (lb/ ft2)
4.882428
2.048161 * 10-1
To Multiply by In.To convert From
45
Dimensions taken from ASTM A53-82
1 cubic ft. of water weighs 62.41 Lbs
1 cubic meter of water weighs 999.972 Kg.
1 gallon (U.S) weighs 8.335 Lbs.
1 Liter weighs .999 Kg.
46
Unite
ch O
utle
ts
Jeddah/ KSATel : +966 2 627 8222Fax: +966 2 627 [email protected]
Jeddah - Ghurab Showroom/ KSA Tel : +966 2 667 2000Fax: +966 2 661 [email protected]
Mak kah, Taif/ KSATel : +966 2 597 2675Fax: +966 2 597 [email protected]
Mad inah/ KSATel : +966 4 864 9111Fax: +966 4 864 [email protected]
Yanbu/ KSATel : +966 4 390 1499Fax: +966 4 322 [email protected]
Khamis Mushayt/ KSATel : +966 7 237 5929Fax: +966 7 237 8783 [email protected]
Baha/ KSATel : +966 7 237 5929Fax: +966 7 237 [email protected]
Najran/ KSATel : +966 7 321 4038Fax: +966 7 321 [email protected]
Gizan/ KSATel : +966 7 321 6660Fax: +966 7 321 [email protected]
Riyadh/ KSATel : +966 1 454 9282Fax: +966 1 456 [email protected]
Riyadh - Rail St. Office/ KSATel : +966 1 810 5926 Fax: +966 1 456 [email protected]
Dubai - Al Quoz/ UAETel : +971 4 347 8238Fax : +971 4 347 [email protected]
Dubai - Al Rashidiyah/ UAETel : +971 4 285 6031Fax : +971 4 286 [email protected]
Sharjah/ UAETel : +971 6 534 4092Fax: +971 6 534 [email protected]
Dubai - Dynamik/ UAETel : +971 4 427 9500Fax: +971 4 427 [email protected]
Abu Dhabi - Musaffah/ UAETel : +971 2 551 2334Fax: +971 2 551 [email protected]
Doha/ QatarTel : +974 4451 3301/2/3Fax: +974 4451 [email protected]
Beirut/ LebanonTel : +961 1 858 277Fax: +961 1 858 [email protected]
Amman/ JordanTel : +962 6 556 3030Fax: +962 6 554 [email protected]
Tripoli/ LibyaTel : +218 21 717 0264Fax: +218 21 477 [email protected]
Muscat/ OmanTel : + 968 2459 1006Fax : + 968 2459 7006 [email protected]
Cairo/ EgyptTel : +20 2 3346 8566Fax: +20 2 3346 [email protected]
Cairo - Gamhouriyah St./ EgyptTel : +20 2 2787 2152Fax: +20 2 2593 [email protected]
Kuwait City/ KuwaitTel : +965 22 459 984Fax: +965 22 459 [email protected]
Sana’a/ YemenTel : +967 1 473 542Fax: +967 1 473 [email protected]
Birmingham/ UKTel : +44 121 698 21 85Fax: +44 121 698 21 [email protected]
GERMANYUNITECH StuttgartTel : +49 711 6868 7222 Fax: +49 711 6868 [email protected]
UKUNITECH BirminghamTel : +44 121 698 21 85Fax: +44 121 698 21 [email protected]
LEBANONMulti - D BeirutTel : +961 1 84 11 55Fax: +961 1 84 11 [email protected]
KSACPU JeddahTel : + 966 2 627 8 275Fax: +966 2 627 8 [email protected]
Qassim/ KSATel : +966 6 382 3946Fax: +966 6 385 [email protected]
Qassim Showroom/ KSATel : +966 6 385 2598Fax: +966 6 382 [email protected]
Tabuk/ KSATel : +966 4 424 3386Fax: +966 4 423 [email protected]
Skakah, Qurayyat/ KSATel : +966 4 626 3904Fax: +966 4 626 [email protected]
Hail/ KSATel : +966 6 543 3931Fax: +966 6 543 [email protected]
Hafar Al Batin/ KSATel : +966 3 721 5915Fax: +966 3 721 [email protected]
Dammam/ KSATel : +966 3 859 0097Fax: +966 3 857 [email protected]
Dammam Showroom/ KSATel : +966 3 834 9300Fax: +966 3 834 [email protected]
Hufuf/ KSATel : +966 3 586 9732Fax: +966 3 584 [email protected]
Jubail/ KSATel : +966 3 361 4390Fax: +966 3 361 [email protected]
Manama/ BahrainTel : +973 1 756 4386Fax: +973 1 756 [email protected]
SFSP/ KSASpecialized Factory forSteel Products - JeddahTel : +966 2 637 4482 Fax: +966 2 636 1963 [email protected]
SFSP/ UAESIGMA Factory forSteel Products - AjmanTel : +971 6 743 9907 Fax: +971 6 743 [email protected]
SIGMA Factory forSteel Products/ Umm Al QuwainTel : +971 6 767 0514Fax: +971 6 767 [email protected]
SFSP/ EGYPTSpecialized Factory for Steel Products - 6th of October, CairoTel : +20 2 3831 2477 Fax: +20 2 3831 [email protected]
KSA National Toll Free Number Tel: 800 119 119 0
SALES OPERATIONS
SAUDI ARABIA
BAHRAIN
UAE EGYPT
KUWAIT
YEMEN
UK
QATAR
LEBANON
JORDAN
LIBYA
OMAN
DESIGN, LOGISTICS, MATERIALS, R&DFACTORIESCHINAUnitech Yiwu, Zhejiang ProvinceTel : +86 579 8545 3180Fax: +86 579 8542 [email protected]
UAETOSL Jebel AliTel : +971 4 886 0262Fax: +971 4 886 [email protected]
EGYPT
KUWAIT
YEMEN
UK
NOTE
S