Technical Specification Simba 1250-Series_9851 2133 01_tcm835-1533189

4
Atlas Copco Technical specification Simba 1250-series Production drilling rigs Standard features »Rock drill • Atlas Copco COP 1800-series • Dual-damping system for shock wave absorption and continuous rock contact for high penetration • Lubricated and pressurized mating surfaces giving long service intervals • Shank adapters suitable for the given hole range »Drilling unit • Mechanized rod handling system • Feed with hydraulic two-stage cylinder • Front- and rear-mounted stingers • Drill steel support for guidance during collaring and as support during rod handling »Positioning unit • Available in three configurations: - Simba 1252 with tilt, rotation and pendulum arm - Simba 1253 with tilt, rotation and slide table - Simba 1254 with tilt, rotation, pendulum arm and slide table • Accurate and smooth movements • Mine-adapted, sturdy components »Control system • Electrical Direct System (EDS) • Anti-jamming system »Carrier • Mine-adapted carrier for small- to medium-sized drifts with articulated steering and four-wheel drive » General • Trolley-mounted operator panel • FOPS-approved protective roof • Electrical cable reel • Working lights on tripods Production drilling rig adapted for small- to medium-sized drifts. Production drilling with tophammer rock drill in the hole range 51–89 (102) mm. Different positioning configurations to match the method used.

description

Especificaciones técnicas de Simba 1250

Transcript of Technical Specification Simba 1250-Series_9851 2133 01_tcm835-1533189

  • Atlas Copco

    Technical specification

    Simba 1250-seriesProduction drilling rigs

    Standard features Rock drillAtlasCopcoCOP1800-seriesDual-dampingsystemforshockwaveabsorptionandcontinuousrockcontactforhighpenetration

    Lubricatedandpressurizedmatingsurfacesgivinglongserviceintervals

    Shankadapterssuitableforthegivenholerange

    Drilling unitMechanizedrodhandlingsystemFeedwithhydraulictwo-stagecylinderFront-andrear-mountedstingersDrillsteelsupportforguidanceduringcollaringandassupportduringrodhandling

    Positioning unitAvailableinthreeconfigurations:

    - Simba1252withtilt,rotationandpendulumarm- Simba1253withtilt,rotationandslidetable- Simba1254withtilt,rotation,pendulumarmandslidetable

    AccurateandsmoothmovementsMine-adapted,sturdycomponents

    Control systemElectricalDirectSystem(EDS)Anti-jammingsystem

    CarrierMine-adaptedcarrierforsmall-tomedium-sizeddriftswitharticulatedsteeringandfour-wheeldrive

    GeneralTrolley-mountedoperatorpanelFOPS-approvedprotectiveroofElectricalcablereelWorkinglightsontripods

    Production drilling rig adapted for small- to medium-sized drifts. Production drilling with tophammer rock drill in the hole range 5189 (102) mm. Different positioning configurations to match the method used.

  • Simba 1250-series

    Specifications

    ROCK DRILL

    COP 1838ME

    Shank adapter R32, T38, T45Hole diameter 5189 mmImpact power 18 kWImpact rate 54 HzHydraulic pressure, max. 230 barRotation motors Separate rotationRotation speed 0210/0140 rpmLub. air consump. (at 3 bar) 5 l/sWater consumption 50 l/minWeight 171 kg

    FEEDBMH 200 BMH 214 BMH 215 BMH 216

    Total length 3,160 mm 3,465 mm 3,770 mm

    Drill rod length 1,220 mm 1,525 mm 1,830 mm

    Total length with extractor 3,365 mm 3,670 mm 3,975 mm

    Electrical system

    Totalinstalledpower.....................................................65kWMainmotorat50Hz.....................................................55kWVoltage.................................................................3801,000VFrequency.................................................................5060HzStartingmethod.........star/delta(380690V)direct(1,000V)ThermaloverloadprotectionforelectricmotorsPercussionhourmetersonA-panelDigitalvolt/amperagemeterinelectriccabinetPhasesequenceindicatorEarthfaultindicatorBatterychargerTransformer....................................................................5kVAWorkinglightsontripods................................. 2x200W,24VCablereel,inner/outerdiameter................... 660/1,095 mm Limitswitchforcablereel

    Air system

    Compressor..................................................AtlasCopcoLE7Capacityat5,400rpmand7bar.....................................12l/sAirpressuregaugeHoleblowingkitwithexternalairAirflowguard

    Water system

    ElectricwaterboosterpumpCapacityat10barboost................................... max100l/minMinwaterinletpressure.................................................. 2barWaterpressuregaugeWaterflowguard

    Carrier

    Engine..........................................................DeutzF5L912WPowerratingat2,300rpm.............................................52kWTorqueat1,550rpm...................................................248NmFixedseatfortramming,includingsafetybeltArticulatedsteering.................................. 41steeringangleFour-wheeldriveFOPS-approvedprotectiveroofHydrostaticpowersteeringsystemHydrodynamictransmission.................................Clark24000Frontaxle............................................................. DANA112Rearaxle..................................... DANA112,10oscillationAutomaticdifferentiallockonfrontaxle,limitedslipTyres........................................................................8.25xR15Clearenceoutsideaxles...................................................... 15Hydraulicjacks,front.......................................... 2extendableHydraulicjacks,rear..............................................................2Servicebrakes2separatecircuits(hydraulicallyapplied,fullyenclosedwetdiscbrakes)

    Emergencyandparkingbrakes.....................................SAHRFueltank,volume.............................................................. 60lElectricsystem.................................................................24VBatteries......................................................................2x70AhTramminglights..........................................................8x70WBrakelightsIlluminatedstairsforplatformCentrallubricationsystemCatalyserSilencerFireextinguisherSpiritlevelsGradeabilityatmaxloadondrivewheels.......................... 1:4Trammingspeedonflatground............................... >10km/hTrammingspeedonincline1:8.................................. >4km/hHorn,beaconandreversealarmOutletforcommunicationradio.......................................12VRigalignmentlaserRAL650

    Drilling unit

    RodHandlingSystem,RHS17............................... 17+1rodsAdaptableto4,5and6rodsAdaptabletoR32,T38,T45SpeedrodsAdaptabletoTDS56andTDS64drilltubesMechanizeddrillingupto32mRockdrilllubricationwarningkit

    Positioning system

    Feedextension(with4drillsteel)............................. 900mmFeedextension(with5and6drillsteel)............... 1,200mmRotaryAcuratorBHR30for360ringdrillingSlidingtableBHT15gives1.5mfeedparallelpositioningPendulumarm,BHP12gives1.5mfeedparallelpositioninginthesidewalls.Addsfurther1.5mfeedparallelpositioningupwards/downwards.

    Stingerbackwardonfeed.......................................BSJ8-115Stingerforwardonfeed..........................................BSJ8-115Feeddump,drilling.............+20forwardand-80backwardRigalignmentlaser...................................................RAL650

    Power pack

    Hydraulicpumpforpercussion,positioning,feedHydraulicpumpforrotationPumpsunloadedatstartSystempressure,max.................................................. 230barHydraulicoiltank,volume.............................................. 124lLowoillevelindicatorandshut-downOiltemperaturegaugeonoiltank,electronicallysupervisedElectricoilfillingpumpFiltration,absolute......................................................... 16mOilfilterindicatorWatercooledoilcoolerinstainlesssteelMineralhydraulicoil

    Control system

    ElectricalDirectSystem,EDSBasicfunctionssuchassemi-automaticdrillingandanti-jammingincluded

  • Simba 1250-series

    SpecificationsDRILL STEEL

    Rock drill Hole diameter, mm Drill rod Shank adapter Guide tube

    COP 1838ME 5164 R32 Speedrod R32 TDS 45

    COP 1838ME 6476 T38 Speedrod T38 TDS 56/TDS 64

    COP 1838HE 7689 T45 Speedrod T45 TDS 64/TDS 76

    COP 2550UX* 7689 (T45)* (T45) TDS 64

    COP 2550UX* 89102 T51* T51 TDS 76

    COP 2550UX* 89102 TDS 64/76* ST58 N/A

    Optional equipment

    Drilling systemWatermistflushing,wateroilcooler,externalairsupplyWatermistflushing,airoilcooler,externalairsupplyRockdrilllubricationsurveillancesystemDrydrillingwithdustcollectorCOP1838MUX,COP1838HE,COP1838HUX,COP2550UX

    Positioning systemAngleReadingInstrument,ARI6Cwith/withoutholedepth

    HoledepthmeasurementThreadlubricationkitAutomaticlubricationforpositioning/drillingsystemCentrallubricationforpositioning/drillingsystem

    Power packsAircooler

    CarrierFiresuppressionsystem,manual/CheckFire/automatic

    Electrical systemElectricalcableonreel,H07RN-FElectricalcableonreel,BuflexPlugPC4SocketPC4SwitchgearElectricsaccordingtolocalstandardsWorkinglightsontripods,2x500W,230V

    MiscellaneousRodholderforextradrillrodsManuallubricationkitRigwashingkitShelffordrillbitsandtools

    *Simba 1253 and 1252 only

  • Simba 1250-series

    9851

    213

    3 01

    c 0

    9/20

    12

    Cop

    yrig

    ht 2

    012,

    Atla

    s Co

    pco

    Rock

    Dril

    ls A

    B,

    rebr

    o, S

    wed

    en. A

    ll pr

    oduc

    t nam

    es in

    this

    pub

    licat

    ion

    are

    trade

    mar

    ks o

    f Atla

    s Co

    pco.

    Any

    una

    utho

    rized

    use

    or c

    opyi

    ng o

    f the

    con

    tent

    s or

    any

    par

    t the

    reof

    is p

    rohi

    bite

    d.

    Illus

    tratio

    ns a

    nd p

    hoto

    s in

    this

    bro

    chur

    e m

    ay s

    how

    equ

    ipm

    ent w

    ith o

    ptio

    nal e

    xtra

    s. S

    peci

    ficat

    ions

    and

    equ

    ipm

    ent a

    re s

    ubje

    ct to

    cha

    nge

    with

    out n

    otic

    e. C

    onsu

    lt yo

    ur A

    tlas

    Copc

    o Cu

    stom

    er C

    ente

    r for

    spe

    cific

    info

    rmat

    ion.

    Measurements

    COVERAGE AREA

    SIDE VIEW

    DIMENSIONS

    mm Width 2,060

    Height tramming (A) 2,660/2,770/2,810

    Height roof up 2,900

    Length (with BHM 214/215/216) (B) 6,580/6,880/7,180

    Ground clearance 260

    WEIGHT

    gross weight

    kg Total 12,500

    RECOMMENDED CABLE SIZE AND LENGTH

    Voltage Type Dimension, mm2 Diameter, mm

    Length, m

    380400 V Buflex 3x70+3G16+2x1.5 37 125

    440575 V Buflex 3x50+3G10+2x1.5 32 150

    660690 V Buflex 3x35+3G6+2x1.5 28 205

    1,000 V Buflex 3x35+3G6+2x1.5 28 205

    G = Protection yellow/greenRecommendations are given for surrounding temperature of 40C.

    80o

    20o

    1960

    B

    135013501990

    2200

    1670

    700

    C

    A 1915

    1810

    Simba 1254

    Simba 1253

    Simba 1252

    750

    1500

    2000

    750

    45o 45o

    945

    240

    1350

    1150

    1150

    1500

    1590

    2000

    945

    240

    1350

    1150

    1150

    750 1500

    1500

    2000

    750

    45o 45o

    945

    235

    1350

    1150 800 800

    1150

    2380

    SIMBA 1252 SIMBA 1253 SIMBA 1254

    TURNING RADIUS

    depending on surface

    mm Outer 5,100

    Inner 2,5002,700