ML2000 SeriesMOULDED HOSPITAL ELECTRICAL ACCESSORIES

clipsal.com/cis/medilec

Introduction 2 - 3

Contents

ML2000 Series

• SOCKET OUTLETS 8 - 11

• SOCKET OUTLETS - CLEANER 10

• SOCKET OUTLETS - RCD PROTECTED 11

AS/NZS3003 Electrical Installations

PATIENT TREATMENT AREAS 5

ML2031RC Series

RESIDUAL CURRENT DEVICES 6

ML2031E08

AUDIBLE/VISUAL ALARMS 7

ML2000R0 Series

EQUIPOTENTIAL EARTH STUDS 12

ML2031EU

GAS OUTLET ADAPTOR PLATE 13

2000 Series

CLIPSAL ACCESSORIES 14 - 15

2000 Series

OEM ACCESSORIES 16

ML2000 Series

THE SIMPLE AND ECONOMICAL ALTERNATIVE 4

Hospitals have undergone a dramatic

transformation in the past 20 years. The

development of less intrusive medical techniques

has meant that patient recovery times have been

greatly reduced. As a result, day surgery clinics are

now a feature of almost every hospital.

Hospital environments are now less intimidating

too. No longer clinical and antiquated, patient

accommodation is often of hotel standard. And

although there is a greater reliance on hi tech

support equipment, it is now designed to blend

with the surroundings to create a more relaxed

environment for both patients and medical staff.

The Medilec Range of hospital equipment is

designed to meet this growing demand for

hospital services and equipment that are

more attractive and less intimidating.

Introduction

EC

ON

OM

ICA

L A

LT

ER

NA

TIV

EM

L20

00

Se

rie

s

ML2000 SERIES

Now an impressive part of the Medilec Range, the ML2000

Series is a complete range of Moulded Hospital Electrical

Accessories. The ML2000 Series is based on the Clipsal

2000 Series of electrical accessories but has additional

features to meet the special needs of hospital patient

treatment areas. As defi ned in AS/NZS3003 - “Electrical

installations: patient treatment areas of hospitals and

medical and dental practices”.

The ML2000 Series products, combined with the following

items, produce a very economical, reliable and modular

Medical Service Panel System that is not only quick and

easy to produce but also looks attractive.

Clipsal 2000 Series Surrounds and Mounting Boxes

or Brackets

Clipsal 2000 Electrical Accessories

OEM 2000 Series Nurse Call Points

OEM 2000 Series Gas Outlets

The s imple & economical alternative

MEETING HIGH STANDARDS

All the ML2000 Series electrical accessories comply with

the relevant Australian Standards for electrical safety (as

well as standards for patient treatment areas) including

AS/NZS3003 - “Electrical installations: patient treatment

areas of hospitals and medical and dental practices”,

and AS/NZS3190 - “Approval and test specifi cations for

residual current devices”.

4

AS/NZS3003. ELECTRICAL INSTALLATIONS: PATIENT

TREATMENT AREAS OF HOSPITALS AND MEDICAL AND

DENTAL PRACTICES

The ML2000 Series product range is designed to meet

the requirements of AS/NZS3003. AS/NZS3003 sets out

the specialist electrical installation requirements often

found in the following premises:

Hospitals

Medical Practices

Dental Practices

Physiotherapy Practices

The areas within these premises that would need to

meet AS/NZS 3003 are classifi ed as Body or Cardiac

Protected Areas. The procedures carried out to classify

these areas as Body or Cardiac Protected are as follows:

Within Body Protected Areas procedures are carried

out where a patient is connected to an item of

electromedical equipment which reduces the impedance

of the skin by either electrode paste or by the entrance

of conducting fl uids, metal needles, saline fi lled

catheters, etc.

Within Cardiac Protected Areas the same procedures

are carried out as in the Body Protected Areas but also

procedures where a patient has an electrical conductor

placed within the heart or is likely to come in contact

with the heart, eg. electrical wires such as cardiac pacing

electrodes and intracardiac ECG electrodes, or insulated

tubes fi lled with conducting fl uids.

Pa

tien

t trea

tme

nt a

rea

s E

LE

CT

RIC

AL

INS

TA

LL

AT

ION

S

5

RE

SID

UA

L C

UR

RE

NT

DE

VIC

ES

(R

CD

s)M

L20

31

RC

Se

rie

s

6

ML2031RC SERIES

The ML2031RC range of RCDs are based on the Clipsal

2031RC range of RCDs for maximum protection against

electrocution. The advantage of the ML2031RC range is that

they have been specially designed with an additional Line

Supply Power Indicator.

The ML2031RC Series RCDs are designed to operate at

10mA which meets the requirements of AS/NZS3003 -

“Electrical installations: patient treatment areas of

hospitals and medical and dental practices”, and

AS/NZS3190 - “Approval and test specifi cations for

residual current devices”.

Features

10mA trip current

Amber indicator marked “SUPPLY POWER AVAILABLE”

Red indicator marked “LINE POWER AVAILABLE”

Inbuilt test facility

RCD protection of GPOs down stream.

Residual Current Devices (RCDs)

Trip Current 10mATrip Time < 40msOperational Voltage 250V a.c. 50HzMaximum Load 20ADimensions 116 x 76mm (30mm rear projection plus wiring)Complies to AS/NZS3190Australian Standards AS/NZS3003Approval No. S/1/2031RC SeriesStandard Colours WE - White Electric RD - Red DB - Dark Blue

Specifi cations

ML2031RC10

ML2031VRC10

CATALOGUE NO. DESCRIPTION

ML2031VRC10 Single gang, double pole, vertical, 250V, 20A, 10mA RCD

ML2031RC10 Single gang, double pole, horizontal, 250V, 20A, 10mA RCD

Wiring Diagram

RCD

Complies to AS/NZS3190 and AS/NZS3112

ML2031E08

ML2031VE08

ML2

03

1E

08

Se

ries

AU

DIB

LE

/VIS

UA

L A

LA

RM

S

7

ML2031E08 SERIES

The ML2031E08 range of Audible/Visual Alarms have

been developed to work in conjunction with the

ML2031RC range of RCDs. When the RCD trips it sets off

an audible and visual indicator. The advantage is that

it provides an excellent means of alerting hospital staff

whenever the RCD has actually tripped.

Features

Multiple 2 tone audible alarm indication

Flashing red visual alarm indication

Mute push-button marked “PRESS TO MUTE”

Audible/Visual Alarms

Operational Voltage 250V a.c. 50HzDimensions 116 x 76mm (34mm rear projection plus wiring)Complies to AS/NZS3100Australian Standard Approval No. SC/975/SStandard Colours WE - White Electric RD - Red DB - Dark Blue

Specifi cations

ML2031VE08 Single gang, vertical, audible/visual alarm, 250V

ML2031E08 Single gang, horizontal, audible/visual alarm, 250V

Wir ing Diagram

CATALOGUE NUMBER DESCRIPTION

ML2000 SERIES

As with other ML2000 Series products, the range of

Socket Outlets is based on the Clipsal 2000 Series but

with additional features to meet the special needs of

hospital patient treatment areas. As defi ned in

AS/NZS3003 - “Electrical installations: patient treatment

areas of hospitals and medical and dental practices”.

When installing a group of socket outlets ideally one

ML2000 socket outlet plate should be used with the

remaining being standard Clipsal socket outlets. The

one ML2000 socket outlet plate will incorporate the

amber Power Available Neon, Circuit Identifi cation,

and protection classifi cation markings for the group of

socket outlets.

Features

Socket Outlets – connected to RCD Protected Supply:

Single or twin outlet

10 or 15 Amp

Single pole switched outlets

Marked “RCD PROTECTED”

Amber Power Available indicator

Optional Clipsal 30PID circuit identifi cation

Socket Outlets – connected to an Isolated

Protected Supply:

Single or twin outlet

Double pole switched outlets

10 Amp

Marked “ISOLATING TRANSFORMER PROTECTED”

Optional Clipsal 30PID circuit identifi cation

Note:

Not all variations are available. Refer to catalogue

number listing for exact options.

Socket Outlets

ML2015 Single outlet, horizontal, power neon, RCD label, 250V, 10A

ML2015I Single outlet, horizontal, power neon, RCD label, circuit identifi cation, 250V, 10A

ML2015/15I Single outlet, horizontal, power neon, RCD label, circuit identifi cation, 250V, 15A

ML2015D Single double pole outlet, horizontal, isolated label, 250V, 10A

ML2025 Double outlet, horizontal, power neon, RCD label, 250V, 10A

ML2025I Double outlet, horizontal, power neon, RCD label, circuit identifi cation, 250V, 10A

CATALOGUE NO. DESCRIPTION

ML2015V Single outlet, vertical, power neon, RCD label, 250V, 10A

ML2015VI Single outlet, vertical, power neon, RCD label, circuit identifi cation, 250V, 10A

ML2015/15VI Single outlet, vertical, power neon, RCD label, circuit identifi cation, 250V, 15A

ML2015VD Single double pole outlet, vertical, isolated label, 250V, 10A

ML2015VDI Single double pole outlet, vertical, isolated label, circuit identifi cation, 250V, 10A

ML2025V Double outlet, vertical, power neon, RCD label, 250V, 10A

ML2025VI Double outlet, vertical, power neon, RCD label, circuit identifi cation, 250V, 10A

ML2025VD Double double pole outlet, vertical, isolated label, 250V, 10A

Vert ical

Horizontal

ML2

00

0 S

erie

sS

OC

KE

T O

UT

LE

TS

9

ML2015VD

ML2025VD

ML2015/15VI

ML2025VI

ML2015VI

ML2025V

ML2015V

ML2015VDIML2025I

ML2015D

ML2015I

ML2025

ML2015/15I

ML2015

Operational Voltage 250V a.c. 50HzMaximum load 10 or 15 AmpsDimensions 116 x 76mm Complies to Australian Standard AS/NZS3112Approval No. S/1/2025 Series, S/1/2015 SeriesStandard Colours WE - White Electric, RD - Red, DB - Dark Blue

Specifi cations

CATALOGUE NO. DESCRIPTION

ML2015C Single gang power outlet, horizontal, Cleaner label, 250V, 10A

ML2015/15C Single gang power outlet, horizontal, Cleaner label, 250V, 15A

ML2025C Double gang power outlet, horizontal, Cleaner label, 250V, 10A

SO

CK

ET

OU

TL

ET

SM

L20

00

C S

eri

es

10

Socket Outlets - CleanerML2000C SERIES

The ML2000C range of socket outlets are clearly

identifi able cleaner socket outlets as defi ned in AS/NZS

3003 “Electrical installations: patient treatment areas of

hospitals and medical and dental practices”. The cleaner

socket outlets are used to connect mains powered

cleaning equipment to dedicated cleaner power circuits.

FEATURES

Single or twin outlet

10 or 15 Amp

Single pole switched

Marked “CLEANING PURPOSES ONLY”

Beige in colour

Operational Voltage 250V a.c. 50Hz

Maximum load 10 or 15 Amps

Dimensions 116 x 76mm

Complies to AS/NZS 3112, AS/NZS 3003Australian Standard

Standard Colours BG - Beige

Specifi cations

ML2015/15C

ML2015C

ML2025C

ML2

025RC

Se

ries

SO

CK

ET

OU

TLETS

11

ML2025RC SERIES

The compact ML2025RC10 incorporates a double socket

outlet and an RCD for maximum protection against

electrocution, on a single grid plate.

The ML2025RC10 RCD is designed to operate at 10mA

which meets the requirements of AS/NZS 3003 “Electrical

installations: patient treatment areas of hospitals and

medical and dental practices”.

FEATURES

10mA trip current

Twin 10A switched outlets

Amber indicator marked “POWER AVAILABLE”

Inbuilt test facility

RCD protection of GPO’s down stream

Standard versions marked “RCD PROTECTED” while

Cleaner versions marked “CLEANING PURPOSES ONLY”.

CATALOGUE NO. DESCRIPTION

ML2025RC10 Double gang power outlet, 250V, 10A, 10mA RCD

ML2025RC10C Double gang power outlet, Cleaner label, 250V, 10A, 10mA, RCD

Specifi cations

Trip Current 10mA

Trip Time < 40ms

Operational Voltage 250V a.c. 50Hz

Max load 10 Amps

Dimensions 116 x 76mm (30mm rear projection plus wiring)

Complies to AS/NZS 3190, AS/NZS 3003Australian Standard

Colours ML2025RC10

WE – White Electric RD – Red DB – Dark Blue

ML2025RC10C

BG – Beige

Socket Outlets - RCD Protected

ML2025RC10

ML2025RC10C

Wir ing Diagram

RCD

Complies to AS/NZS3190 and AS/NZS3112

EQ

UIP

OTE

NTI

AL

EA

RTH

STU

DS

ML2

00

0R

0 S

eri

es

12

ML2031VR01 Single gang, vertical, EP stud

ML2032VR02 Double gang, vertical, EP stud

ML2031R01 Single gang, horizontal, EP stud

ML2032R02 Double gang, horizontal, EP stud

CATALOGUE NO. DESCRIPTION

Dimensions 116 x 76mm (23mm rear projection)Complies to Australian Standard AS/NZS3003

Standard Colours WE – White Electric RD – Red DB – Dark Blue

Specifi cations

ML2000R0 SERIES

The ML2031R0 & ML2032R0 ranges of Equipo-

tential (EP) Earthing Studs have been developed

to meet the relevant requirements of EP Earthing

within hospitals as detailed AS/NZ3003 - “Electrical

installations: patient treatment areas of hospitals

and medical and dental practices”.

Features

Single or Twin EP Stud

EP Stud clearly identifi ed in colour green

Screw clamping system for effective EP

Earthing connections

Equipotential Earth Studs

ML2031VR01

ML2032VR02

ML2031R01

ML2032R02

ML2

03

1E

U S

erie

sG

AS

OU

TL

ET

AD

AP

TO

R P

LA

TE

13

ML2031EU

The ML2031EU Gas Outlet Adaptor Plate has been

developed to allow the ESCO MEDICON range of gas

outlets to fi t to the ML2000 Series system. The blank

grid plate is pre-drilled with convenient mounting

holes to allow the Gas Outlet to be fi tted vertically

or horizontally.

Note: The plate does not accept the ESCO MEDICON

Venturi Suction and Venturi Gas Outlets.

ML2031EU Single gang grid plate

CATALOGUE NO. DESCRIPTION

Gas Outlet Adaptor Plate

ML2031EU

Standard Colours WE – White Electric RD – Red DB – Dark Blue

Specifi cations

CL

IPS

AL

AC

CE

SS

OR

IES

2000

Se

rie

s

14

The ML2000 Series is based on the Clipsal 2000 Series

therefore the Medical Service Panels will incorporate

some of the Clipsal 2000 Series products. Detailed below

is a list of some of the more common Clipsal 2000

Series products.

Please refer to the Clipsal Trade Product Guide for a

complete listing of the Clipsal 2000 Series accessories.

Cl ipsal 2000 Series

Technical Data

Surrounds2000 1 gang, surround (116x76mm)2000/2 2 gang, vertical, surround (116 x 144mm)2000/3 3 gang, vertical, surround (116 x 219mm)2000/4 4 gang, vertical, surround (116 x 290mm)2000H2 2 gang, horizontal, surround (76 x 229mm)2000H3 3 gang, horizontal, surround (76 x 342mm)

Wall Boxes157 1 gang, wall box2157/2 2 gang, vertical, wall box2157/3 3 gang, vertical, wall box2157/4 4 gang, vertical, wall box2157H2 2 gang, horizontal, wall box2157H3 3 gang, horizontal, wall box

Mounting Brackets WALL BOARD154 1 gang, wall board mounting clip2154/2 2 gang, vertical, wall board mounting clip2154/3 3 gang, vertical, wall board mounting clip2154/4 4 gang, vertical, wall board mounting clip2154H2 2 gang, horizontal, wall board mounting clip2154H3 3 gang, horizontal, wall board mounting clip

CATALOGUE NUMBER & DESCRIPTION

2157/4

2154/4

2000/4

20

00

Se

ries

15

CL

IPS

AL

AC

CE

SS

OR

IES

PLASTER MOUNT (Mounting Brackets cont.)155P 1 gang, plaster mounted bracket2153PRM2 2 gang, vertical, plaster mounted bracket2155PRM3 3 gang, vertical, plaster mounted bracket2155PRM4 4 gang, vertical, plaster mounted bracket2155PHRM2 2 gang, horizontal, plaster mounted bracket2155PHRM3 3 gang, horizontal, plaster mounted bracket

Electrical AccessoriesSOCKET OUTLETS2015V Single gang power outlet, vertical, 250V, 10A2015 Single gang power outlet, horizontal, 250V, 10A2025V Double gang power outlet, vertical, 250V, 10A2025 Double gang power outlet, horizontal, 250V, 10ASWITCHES2031VA 1 gang, vertical, switch, 250V, 10A2032VA 2 gang, vertical, switch, 250V, 10A2033VA 3 gang, vertical, switch, 250V, 10A2034VA 4 gang, vertical, switch, 250V, 10A2035VA 5 gang, vertical, switch, 250V, 10A2036VA 6 gang, vertical, switch, 250V, 10A2031HA 1 gang, horizontal, switch, 250V, 10A2032HA 2 gang, horizontal, switch, 250V, 10A2033HA 3 gang, horizontal, switch, 250V, 10A2034HA 4 gang, horizontal, switch, 250V, 10ADIMMERS2032E450L 1 gang light dimmer, incandescent, 250V, 450W leading edge

PHONE & DATA2031VTO 1 gang telephone outlet plate, Telstra 610 type2031VRJ 1 gang data outlet, RJ45 Series socket mech.2032VRJ 2 gang data outlet, RJ45 series socket mech.

Technical Data

CATALOGUE NUMBER & DESCRIPTION

2033HA

2015V

2032VRJ

2032E450L

OE

M A

CC

ES

SO

RIE

S2

00

0 S

eri

es

16

2000 SERIES

Medical Service Panels located within hospitals often

incorporate systems other than items found within

the Medilec ML2000 and Clipsal 2000 product range.

These additional systems include Nurse Call and Gas

Supply systems.

The advantage of the Clipsal 2000 Series format is that

it is a common platform on which other companies

develop their products. Therefore all of the systems

found on Medical Service Panels are available on the

2000 Series platform.

Detailed below is a list of some of the OEM suppliers of

2000 Series Accessories.

Nurse Call Systems

Austco Communications Systems

Inteltec Communications

MI-CAL Systems

Questek Australia

Gas Systems

Gascon Systems

OEM 2000 Series Accessories

Gascon Gas Outlet

Austco Nurse Call

Questek Nurse Call

MI-CAL Nurse Call

Product of Clipsal Integrated Sys temsA division of Clipsal Australia Pty LtdABN 27 007 873 529

Head Offi ce12 Park Terrace, BowdenSouth Australia 5007

PO Box 103 HindmarshSouth Australia 5007Telephone (08) 8440 0500International +61 8 8440 0500

Facsimile (08) 8346 0845International +61 8 8346 0845

Internet www.clipsal.com/cisE-Mail cis@clipsal.com.au

CIS Technical Support Hotline:1300 722 247

National Customer Service Enquiries:1300 2025 25

National Customer Service Facsimile:1300 2025 56

International Enquiries

International Sales and MarketingTelephone +61 8 8269 0587Facsimile +61 8 8340 7350E-Mail export@clipsal.com.au

New ZealandClipsal Industries (NZ) LtdTelephone +64 9 576 3403Facsimile +64 9 576 1015E-Mail headoffi ce@clipsal.co.nz

Customer ServiceFree Facsimile (0508) 250 305Auckland/Mobile Phone (09) 572 0014Free Phone (0508) CLIPSAL 2547725

MalaysiaClipsal Malaysia Sdn BhdNo 1 Jalan Kawat15/18 Seksyen 1540200 Shah AlamSelangor Darul EhsanWest Malaysia, MalaysiaTelephone: +60 3 551 91111 or 97628Facsimile: +60 3 551 94837’E-Mail: clipsal@clipsal.com.my

Singapore

Clipsal International Pte LtdNo 5 Fourth Chin Bee RoadSingapore 619699Telephone: +65 6 415 3288Facsimile: +65 6 415 3241E-Mail: clipsal@pacifi c.net.sg

Clipsal Australia Pty Ltd reserves the right to change spec i fi ca tions, modify designs and dis con tin ue items without incurring obligation and whilst every effort is made to ensure that descriptions, specifi cations and other in for ma tion in this catalogue are correct, no warranty is given in respect thereof and the company shall not be liable for any error therein.

You can fi nd this brochure and many others online in PDF format at: clipsal.comFollow the links off the home page or access the following page directly: clipsal.com/wat_lib_pdf.cfm

clipsal.com/cis

© Clipsal Australia Pty Ltd 2006.All rights reserved.

This material is copyright under Australian and international laws. Except as permitted under the relevant law, no part of this work may be reproduced by any process without prior written permission of and acknowledgement to Clipsal Australia Pty Ltd.

International Representatives

ChinaClipsal China LimitedTelephone +86 755 8237 5959

GreeceSchneider Electric AETelephone +30 69 4646 3200

Hong KongClipsal Integrated Systems (HK) LimitedTelephone +852 2487 0261

IndiaSchneider Electric India Pvt Ltd Telephone +91 11 5159 0000

IndonesiaPT Clipsal Graha NusaTelephone +62 21 630 6430

KoreaClipsal Korea Co. LtdTelephone +822 549 5550

PakistanClipsal Pakistan (Pvt) LtdTelephone +92 21 506 7278

PhilippinesClipsal Philippines Inc.Telephone +632 683 0275-78

South AfricaClipsal South Africa (Pty) LtdTelephone +27 11 314 5200

TaiwanClipsal (Taiwan) Co LtdTelephone +886 2 2558 3456

ThailandClipsal Thailand LtdTelephone +66 2 952 5338-42

United Arab EmiratesClipsal Middle EastTelephone +971 6 5570 777

United KingdomClipsal Integrated SystemsC/o Schneider ElectricTelephone +44 870 608 8 608

VietnamClipsal - VTECTelephone +848 856 3002 IS

1-00

5

O/N 17747 April 06/03CLIPCOM 11653 Aug 2006