t

Index to Vol. 10 (1970)

Transactions of The Iron and Steel Institute of Japan

Table of Contents

No. 1

Kinetics of Decarburization of Liquid Iron in an Oxidizing Atmosphere .................................................... I* By Koki GuNJI

Formation of the Equiaxed Zone in Ingots and Macrosegregation in Steel Ingots ............................................ 13

By Atsumi OHNO and Hiroshi SoDA Behaviors of Nitrogen Atoms in Irradiated Iron and Iron Alloy Revealed by Internal Friction and Electron Microscopy .......... 21

By Naohiro !GATA, Ryukiti R. HASIGUTI, and Satio SETO Initial Stage of Reduction of Dense Wustite ............................................................................ 2 5

By Minoru SASABE, Kazuhiro GOTO, and Mayumi SoMENO The Solubility of Water in Liquid CaO-SiO2-MgO with and without" FeO" at I 550°C .................................... 29

By Yasutaka Iaucm and Tasuku FuwA On the Rate of Reduction of MnO from Molten Slag by Carbon-Saturated Iron ............................................ 36

By Teinosuke YAGI and Y oichi ONO Pre-reduced Material in Blast Furnace Charge .......................................................................... 38 * *

By Keiji TsuJIHATA, Isao MITOMA, Yajiro FuKAGAwA, Shin HASHIMOTO, and Hideo ToDA On the Construction and Operation ofMizushima Iron Works ......................................................... .47**

By Eiro IwAMURA Abstracts from Tetsu-to-Hagane, Vol. 55 (1969), No. 14 (Dec.) and Vol. 56 (1970), No. I (Jan.) .............................. 69t

No. 2

Fatigue Notch-Sensitivity of Nodular Cast Iron in Comparison to Steel .................................................... 73 By B. E. LINDBLOM

The Solubility of Oxygen in a-Iron .................................................................................... 78 By Akihiko KusANo, Koin IT6, and Kokichi SANO

The Effect of Alloying Elements on the Solubility of Oxygen in a-Iron .................................................... 83 By Kiyoshi NISHIKAWA, Akihiko KusANO, Koin ho, and Kokichi SANO

Development of Deformation Texture and Change in Plastic Anisotropy in Sheet Forming .................................... 89 By Kazuhide NAKAOKA

Structural Alterations of Bearing Steels under Rolling Contact Fatigue .................................................... 98 By Kazuo SucINo, Katsuyoshi MIYAMOTO, Michihiko NAGUMO, and Koichi AoKI

On the Relation between Iron Oxide in Slag and Oxygen in Steel in LD Converter ........................................ 112

By Shinji TsuDA, Takami IKEDA, and Katsukiyo MARUKAWA Effect of Aging on Temperature and Strain Rate Dependences of Upper and Lower Yield Points of Pure Iron Containing Nitrogen

and Carbon ............................................................................................ 118 By Yukio OHBA and Yasuhiro SEKINO

Properties of Iron-Silver Laminate .................................................................................. 123 By Nobuhisa UJIIYE and Isao TAKAHASHI

Some Remarks on "A Contribution to Study of Rimming Steel Solidification " ... ·, ........................................ 127 By P. NILLES and R. PESCH

1969 Review of Iron and Steel Production and Technique in Japan ...................................................... 128** By Takeshi YAMAOKA

Abstracts from Tetsu-to-Hagane, Vol. 56 (1970), Nos. 2 and 3 (Feb. and Mar.) ............................................ 14It

No. 3

Mechanism of Gas Evolution of Rimmed Steel ........................................................................ 147 By Koichi AsANo and Tsuyoshi SAEKI

Identification marks suffixed to the page number : Unmarked: Research Articles, Research Notes, and Letters to the Editor

*

**

t

Reviews Reports Miscellaneous articles

Index to Vol. 10 (1970) [ 1)

( 2)

On the Morphology of Strain-Induced Martensite and the Transformation-Induced Plasticity in Fe-Ni and Fe-Cr-Ni Alloys .... 163 By Imao TAMURA, Tadashi MAKI, and Hiroshi HATO

Strain Rate, Temperature, and Grain Size Dependence of the Lower Yield Stress of Polycrystalline Iron ................... , .. 173 By Norio NAGATA, Susumu YositIDA, and Yasuhiro SEKINO

Improved Mathematical Model for Estimating Process Variables in Blast Furnace .......................................... 181 By.Jun-ichiro YAGI and lwao MucHI

Serrated Flow and Liiders Bands Observed in Fe-Ni-C Martensite during Tensile Testing ... , ...... . ... . . .... . . .. .......... 188 By Imao TAMURA, Masaharu ToKIZANE, and Yoshio AsHIDA

Correlation betw~en Work Hardening and Dislocation Structure in Iron Crystals Deformed in Tension at 198°K and 293°K .... 197 By Tadayoshi YAMASHITA and Youji TANEDA

Theoretical Analyses on the High Top-Gas-Pressure Operation and Oxygen-Enriched Operation of Blast Furnace .............. 207 By Keiichi WAKABAYASHI, Masami FuJIURA, Takashi MoRI, and Nobuo INOUE

Effects ofNommetallic Inclusions on the Hot Torsional Defonnability of Rimmed Steel. ...... . . .. .. ........ ... ...... .. ..... . 216 By Genjiro MIMA, Fukuji INOKO, and Katsumi lsHIKAWA

Abstracts from Tetsu-to-Hagane, Vol. 56 (1970), Nos. 5 and 6 (April and May) ........... . ................. .. ............. 222t

No. 4 Intergranular Brittle Fracture of Iron ............... . ........ .. ..... . ..... . ................. . ................ .. ...... 229

By Tadahisa NAKAMURA and Tsuneaki SAKAKI Kinetics of Nitrogen Removal from Liquid Iron ............... .... .......... . . . . . . ... .. .. . . . . ................ .......... 232

By Kazumi MORI and Kanae SuzuKI Effect of Boron on the High Temperature Properties of 10Mn-6Ni-20Cr-0.6N Type Alloys ............ ... .......... .. .... . .. 239

By Heitaro YosHIDA, Kisaburo KOIKE, and Renpei YODA Theoretical Analysis by the Use of Mathematical Model in LD Converter Operation ............ . .......... .... ............. 250

By Shigeo AsAI and I wao MucHI The Change of Mechanical Property with Aging in Fe-13 at% Be Alloy .................................................. 264

By Toshihiro YAMAGATA, Kohei YAGISAWA, and Hidehiko YosHIDA Mass Spectrometric Study ofDesulfurization oflron Alloys by Vacuum Melting ..... . ....................... . ... . .. .... .. 270

By Yoshito FuKUBE and Eiichi KATO Analysis of Thermal Stress in Ingot Moulds ... .. . . ..... . .......... . . . ... . . ........... ........ .. .. .... . .. ........ .... . 276

By Tatsuo HIRATANI On Primary Blow-Hole of Rimmed Steel ............................................................................ 284

By Masuta OHKUBO, Akira MAsm, Hideki SATO, Senzo WAKABAYASHI, and Shunkichi MIYOSHI Study on Dispersion Strengthened Ferri tic Heat Resisting Steel .......................................................... 293

By Teishiro ODA and Takashi DAIKOKU On the Construction and Operation of the Kimitsu Iron Works .................... . ... . .. ... .. .. . . .. ... .... ........... .. 302**

By Shunzo FuJIKI Abstracts from Tetsu-to-Hagane, Vol. 56 (1970), Nos. 7 and 8 (June and.July) ....... .. .. ...................... . . ......... 322t

No. 5 Effect of Helium on High Temperature Properties of2¼Cr-1Mo and Type 316 Stainless Steels ....... . ......... .... ... . ... .... 325

By Byoung Whie LEE Effect of Environments on Strain Hardening of Cubic Polycrystalline Metals ........... . .................................. 332

By Byoung Whie LEE Analysis of Hot Strip Work Roll Damage due to Cobble .... . ........... ......... .... . ... .. .. ... .......... . ........ .. . 341

By Yasuhiro SEKIMOTO Behavior and Thermodynamic Properties of Tantalum-Carbide and -Nitride in Steels ..... . .......... .... ... . ..... ... ...... 350

By Toshisada MORI, Masaharu ToKIZANE, Eihachiro SuNAMI, and Yoshiyuki NAKAJIMA The Characteristics of Spark Carburization ........................................................ . . ... . ... .. .. . .... 360

By Kiyoshi INouE and Yoshinori SHIMA Resistometric Study of Precipitation in Maraging Steel ................................................ . .. .... .. .... .. . 369

By Ko SoENO and Tetsuro KuRODA Influence of the Precipitated Graphite on the Determinations of Gases Contents in Iron by Vacuum Fusion Method Using

Graphite Crucible ...................................................................................... 379 By Y oshihiko ABE

Grain Boundary Internal Friction of Iron-base Binary Alloys .............. ..... ..... .... ... ... ..... ......... ............ 385 By Haruki SHIRAISHI and Toru ARAKI

Theoretical Estimations on the Longitudinal Distributions of Process Variables in Blast Furnace and on Its Productivity ...... . . 392 By Jun-ichiro YAGI and lwao MucHI

Electron Probe Microanalysis of Titanium and Zirconium Carbonitride Inclusions in Steel .................................. 406 By Toshio SHIRAIWA, Nobukatsu FUJINO, andjun-ichiro MuRAYAMA

Effect of Si, Mn, Sn, and Cu on the Tempering Stage ofFe-l.0%C Alloys .......... ... ...... ......... .... .. ...... ....... .413 By Tetsu 01

Abstracts from Tetsu-to-Hagane, Vol. 56 (1970), Nos. 9 and 10 (Aug. and Sept.) .......................................... 415t

Index to Vol. 10 (1970)

-

-

-

- (3)

t

No. 6 On the High-Temperature Corrosion of Fe-Al Alloys in Sulfur Vapor .............. ... ...... ...... ............. ... ...... .421

By Keizo NISHIDA Effect of AIN Precipitation on Mechanical Properties of a-Iron .......................................................... 429

By Tadashi lcHIYAMA, Mahito KOIZUMI, lkushi YosHIDA, Kunio WATANABE, and Seiji N1sHIUMI Effect of the Surface Vibration on the Structure of Ingots ........ .... ............................ . .............. . ..... .442

By Atsumi OHNO and Hiroshi SODA Effect of Carbon Content on Deep Drawability of Rimmed Steel Sheet .............. . .................. .. ............... 448

By Kazuo MATSUDO and Takayoshi SHIMOMURA Formation Mechanism of the Equiaxed Chill Zone in Ingots ........................................................... .459

By Atsumi OHNO Mineralogical Study of the Burden Materials in Tobata No. I Blast Furnace ......... • ... • ... • ... • ... • ......... ... ... . .... 464

By Minoru SASAKI and Takao NAKAZAWA Coupled Diffusion in Slags ........ . .. ... ............... . ..... . ........ ...... .............................. . ...... .473

By W-K. Lu The Metallographic Observation of the Tread of Wheels Subjected to Various Service Conditions ......... . ....... . .......... 476**

By Tatsuro KuNITAKE, Seiichi NISHIMURA, and Hajime TAGASHIRA Abstracts from Tetsu-to-Hagane, Vol. 56 (1970), Nos. 12 and 13 (Oct. and Nov.) ... . ....................... ... .. . ........ . 490t

Name Index

IWAMURA, Eiro ......... , ........... .47 NISHIMURA, Seiichi ... ..... .. ........ 476 A

ABE, Yoshihiko ... . ................ 379 AsHIDA, Yoshio ..... . .............. 188

K

KATO, Eiichi .................... 270

N1sHIUMI, Seiji .... . ............... 429

0

AoK1, Koichi ...................... 98 KOIKE, Kisaburo .................. 239 ODA, Teishiro .................... 293

ARAKI, Toru ...................... 385 KOIZUMI, Mahito ................. .429 0HBA, Yukio .... ... ............. . . 118

AsAI, Shigeo ... .. ................. 250 KuNITAKE, Tatsuro .... . ........... 476 0HKUBO, Masuta .................. 284

AsANo, Koichi ... . . . ..... .. ... . ... 14 7 KusANo, Akihiko . ............... 78, 83 OHNO, Atsumi . ......... .... 13,442,459 KURODA, Tetsuro .................. 369 01, Tetsu ................. . ...... 413

D 0No, Yoichi ........ . ........... .. 36 DAIKOKU, Takashi .................. 293 L

LEE, Byoung Whie ............ 325, 332 p

F LINDBLOM, B. E. . . ............... . .. 73 PESCH, R. . ....................... 127 FuJIKI, Shunzo .................... 302 FUJINO, Nobukatsu ................ 406 FuJIURA, Masami ......... . ... . .... 207

Lu, W-K ......................... 473

M s

SAEKI, Tsuyoshi .................. 147

FUKAGAWA, Yajiro .................. 38 MAKI, Tadashi .......... . ... • ..... 163 SAKAKI, Tsuneaki .................. 229

FuKUBE, Yoshito ....... . ... . ...... 270 MARUKAWA, Katsukiyo ............ 112 SANO, Kokichi .................. 78, 83

FuwA, Tasuku ...................... 29 MAsUI, Akira .................. . ... 284 SASABE, Minoru .................... 25 MATSUDO, Kazuo . ... ... ........... 448 SASAKI, Minoru ............. . ..... . 464

G MIMA, Genjiro ............ . ....... 216 SATO, Hideki ...................... 284 GoTo, Kazuhiro .................... 25 M1TOMA, Isao ...................... 38 SEKIMOTO, Yasuhiro ............ ... . 341 GuNJI, Koki ................... ... .. 1 MIYAMOTO, Katsuyoshi .............. 98 SEKINO, Yasuhiro . . . .. • ........ 118, 173

H MIYOSHI, Shunkichi ................ 284 MoRI, Kazumi ........ ... . . ....... 232

SETO, Satio ........................ 21 SHIMA, Yoshinori .................. 360

HASHIMOTO, Shin ... . . . ............ 38 MORI, Takashi .................... 207 SHIMOMURA, Takayoshi ............ 448 HASIGUTI, Ryukiti R ................. 21 MoRI, Toshisada ................ .'. 350 SHIRAISHI, Haruki .................. 385 HATO, Hiroshi .................... 163 Mucm, Iwao ........ .. .... 181, 250,392 SHIRAIWA, Toshio .................. 406 H1RATANI, Tatsuo ... . .............. 276 MURAYAMA, Jun-ichiro ........ ... .406 SODA, Hiroshi .................. 13,442

I N SoENo, Ko ........................ 369 SOMENO, Mayumi .................. 25

lcHIYAMA, Tadashi ............. ... 429 NAGATA, Norio .................... 173 SuGINO, Kazuo ............... . ...... 98 IGATA, Naohiro .................... 21 NAGUMO, Michihiko . . .............. 98 SuNAMI, Eihachiro ................ 350 IGucm, Yasutaka .................... 29 NAKAJIMA, Yoshiyuki .............. 350 SuzuKI, Kanae .................... 232 IKEDA, Takami ........ .. ........ 112 NAKAMURA, Tadahisa .............. 229 INOKO, Fukuji ........ ....... ..... 216 NAKAOKA, Kazuhide ................ 89 T

INOUE, Kiyoshi ............ . ....... 360 NAKAZAWA, Takao ................ 464 TAGASHIRA, Hajime .......... • ..... 476 INOUE, Nobuo .................... 207 NILLES, P. . ....................... 127 TAKAHASHI, lsao .......... .. . . .... 123 ISHIKAWA, Katsumi ................ 216 NISHIDA, Keizo ................... .421 TAMURA, Imao ............ . ... 163, 188 ho, Kain ...................... 78, 83 NISHIKAWA, Kiyoshi ................ 83 TANEDA, Youji .................... 197

Index to Vol. 10 (1970)

(4) -ToDA, Hideo . . ........ . . ........ . . 38 WAKABAYASHI, Senzo .... .. . .. . .... 284 YODA, R enpei . . . ... . .. . .... . ..... 239 ToKIZANE, Masaharu ... ....... 188, 350 WATANABE, Kunio . .. ... . .... . .... 429 YosHIDA, H eitaro ...... ...... • ..... 239 TsuDA, Shinji .... .... . .. . . ... . . . . 112 YosHIDA, Hidehiko .......... . ... . . 264 TsUJIHATA, K eiji .... ....... . . . .. . ... 38 y

YosHIDA, Ikushi . . .. ...... ..... ... 429 YAGI, Jun-ichiro .. .. ... ..... .. 181, 392 YosHIDA, Susumu . ....... ...... .. . . 173

u YAGI, T einosuke .. . ........ ......... 36 UJIIYE, Nobuhisa ...... .. . . .. .. .... 123 YAGISAWA, Kohei . . . . .... .. .. ...... 264

YAMAGATA, Toshihiro .. .. . . . .. ..... 264 w YAMAOKA, Takeshi . . . . .. .. .. . .... . 128

WAKABAYASHI, K eiichi . . . . . ...... . .. 207 YAMASHITA, Tadayoshi . ... .... . ... 197

-

-

Index to Vol. 10 (1970)