Switzerland - REGO-FIX Tool Corporationimts.rego-fix.com/downloads/REGOPLUS.pdf · “BIG PLUS...
-
Upload
truongphuc -
Category
Documents
-
view
216 -
download
0
Transcript of Switzerland - REGO-FIX Tool Corporationimts.rego-fix.com/downloads/REGOPLUS.pdf · “BIG PLUS...
SwissPrecisionTools
Made inSwitzerland
As a licensed BIG PLUS manufacturer, REGO-FIX® uses new state-of-the-art measuring and grinding systems to create the most accurate dual contact holders on the market.
REGO PLUS toolholders are balanced by design to G2.5 @ 22,000 rpm and are
(form B) and coolant through the taper (form AD) as a standard to meet your machining requirements.
Increased toolholder stiffness due to taper and face contact
Improved machining accuracy and better
Form AD+B coolant supplied as standard
Compatible with BIG PLUS spindles and standard spindles
Manufactured in Switzerland under license according to BIG PLUSBIG PLUS SYSTEM – Licensed by BIG Daishowa
Available in ER and powRgrip® Systems
Coolant supply
(form B)Coolant supply
through the taper(form AD)
Taper Contact
Flange Contact
REGO-FIX.COM 1-800-999-7346
“BIG PLUS SYSTEM - Licensed by BIG Daishowa”
Swiss QualityMade in Switzerland to ISO 9001/ISO 14001
MarkingType and part number
TraceabilityLot numbers are marked on all products for traceability throughout the entire manufacturing process.
REGO-FIX / BIGLicensed by BIG Daishowa for BIG PLUS spindles
Coolant ThroughAll holders are form AD for coolant through the taper
Q+® Balancing 100% balanced to 22,000 rpm
Matched Tooling System for Best FitWhen it comes to achieving the highest precision and best results, the whole system counts. For that reason, REGO-FIX components are carefully matched for
runout and balance.
TIR of the SystemREGO PLUS ER runout of 0.0002" or better with a REGO-FIX UP Collet
REGO PLUS PG runout of 0.0001" or better when using the REGO-FIX powRgrip System(See www.rego-fix.com/pg for more details on the powRgrip System.)
REGO-FIX.COM 1-800-999-7346
Features Benefits
TypeStandardPart No.
D [mm]
L [mm] Balancing Rings Wrench
BT+ 40 / ER 16 x 070 H 4140.11636 28 70 FWR 285 7112.16010
BT+ 40 / ER 16 x 100 H 4140.11656 28 100 FWR 285 7112.16010
BT+ 40 / ER 20 x 070 H 4140.12036 34 70 FWR 325 7112.2010
BT+ 40 / ER 25 x 070 H 4140.12536 42 70 FWR 325 7111.25000
BT+ 40 / ER 32 x 070 H 4140.13236 50 70 FWR 405 7111.32000
BT+ 40 / ER 32 x 100 H 4140.13256 50 100 FWR 405 7111.32000
BT+ 40 / ER 32 x 160 H 4140.13286 50 160 FWR 405/405 7111.32000
BT+ ER
TypeStandardPart No.
D [mm]
L [mm] Balancing Rings Wrench
BT+ 50 / ER 32 x 100 H 4150.13256 50 100 FWR 505 7111.32000
BT+ 50 / ER 32 x 160 H 4150.13286 50 160 FWR 505/405 7111.32000
TypeStandardPart No.
D [mm]
L [mm] Balancing Rings Wrench
BT+ 30 / ER 11x 100 4130.11156 19 100 FWR 285 7112.11010
BT+ 30 / ER 16 x 050 2130.11616 28 50 -- 7112.16010
BT+ 30 / ER 16 x 080 4130.11646 28 80 FWR 285 7112.16010
BT+ 30 / ER 20 x 050 2130.12016 34 50 -- 7112.20010
BT+ 30 / ER 20 x 070 4130.12036 34 70 FWR 285 7112.20010
BT+ 30 / ER 25 x 060 4130.12526 42 60 FWR 325 7111.25000
BT+ 30 / ER 32 x 060 2130.13226 50 60 -- 7111.32000
SYSTEM powRgrip®
SYSTEMER
The REGO-FIX ER system is the basis for all other ER systems in the world. Developed by REGO-FIX, the ER system has grown to be the world’s most used collet system.
The ER Hi-Q nut system provides up to 120% more clamping force than a standard metal nut. The Hi-Q nut undergoes a special heat treatment process that provides a slick surface for the collet face and threads, resulting in less friction and higher clamping forces. All REGO-FIX holders come with a Hi-Q nut.
REGO-FIX.COM 1-800-999-7346
The original system
“BIG PLUS SYSTEM - Licensed by BIG Daishowa”
TypeStandardPart No.
D[mm]
L[inch] Balancing Rings Wrench
CAT+ 40 / ER 11 x 3" H 4340.11136 19 3 FWR 325 7112.11010
CAT+ 40 / ER 16 x 3" H 4340.11636 28 3 FWR 325 7112.16010
CAT+ 40 / ER 16 x 6" H 4340.11676 28 6 FWR 325/225 7112.16010
CAT+ 40 / ER 20 x 3" H 4340.12036 34 3 FWR 285 7112.20010
CAT+ 40 / ER 25 x 4" H 4340.12556 42 4 FWR 325 7111.25000
CAT+ 40 / ER 32 x 3" H 4340.13236 50 3 FWR 405 7111.32000
CAT+ 40 / ER 32 x 6" H 4340.13276 50 6 FWR 405/405 7111.32000
CAT+ ER
TypeStandardPart No.
D[mm]
L[inch] Balancing Rings Wrench
CAT+ 50 / ER 16 x 4" H 4350.11656 28 4 FWR 505 7112.16010
CAT+ 50 / ER 16 x 6" H 4350.11676 28 6 FWR 505/225 7112.16010
CAT+ 50 / ER 20 x 4" H 4350.12056 34 4 FWR 505 7112.20010
CAT+ 50 / ER 25 x 4" H 4350.12556 42 4 FWR 505 7111.25000
CAT+ 50 / ER 32 x 4" H 4350.13256 50 4 FWR 505 7111.32000
CAT+ 50 / ER 32 x 6" H 4350.13276 50 6 FWR 505/405 7111.32000
CAT+ 50 / ER 40 x 4" H 4350.14056 63 4 FWR 505 7111.40000
REGO-FIX.COM 1-800-999-7346
“BIG PLUS SYSTEM - Licensed by BIG Daishowa”
1-800-999-7346
TypeStandardPart No.
D[mm]
L[inch] Balancing Rings
CAT+ 40 / PG 10 x 3.5" H 4340.71006 16 3.5 FWR 285
CAT+ 40 / PG 10 x 6" H 4340.71076 16 6 FWR 285
CAT+ 40 / PG 15 x 3.15" H 4340.71546 24 3 FWR 285
CAT+ 40 / PG 15 x 6" H 4340.71576 24 6 FWR 325/285
CAT+ 40 / PG 25 x 3.15" H 4340.72546 40 3 FWR 405
CAT+ 40 / PG 25 x 6" H 4340.72576 40 6 FWR 405/405
CAT+ 40 / PG 32 x 3.5" 2340.73206 50 3.5 --
CAT+ PG
TypeStandardPart No.
D[mm]
L[inch] Balancing Rings
CAT+ 50 / PG 10 x 4" H 4350.71056 16 4 FWR 405
CAT+ 50 / PG 15 x 4" H 4350.71556 24 4 FWR 405
CAT+ 50 / PG 25 x 4" H 4350.72556 40 4 FWR 505
CAT+ 50 / PG 25 x 6" H 4350.72576 40 6 FWR 505/405
CAT+ 50 / PG 32 x 4.3" H 4350.73256 50 4.3 FWR 505
CAT+ 50 / PG 32 x 6" H 4350.73276 50 6 FWR 505/505
SYSTEMpowRgrip®
The REGO-FIX powRgrip® is an extremely precise,
for your high-speed, high-performance cutting applications.
The system delivers superior runout using a toolholder, versatile collet and compact benchtop hydraulic clamping unit.
The collet’s built-in set screw provides precise
The powRgrip holder’s slightly tapered shape, combined with the 9-ton tabletop clamping unit, delivers the highest clamping force on the market without dangerous heat or hazardous EMF radiation.
With a simple 10-second clamping cycle and a tool that’s ready for immediate use without the need for cool-down, you can complete tool changes in less than 30 seconds.
REGO-FIX.COM
“BIG PLUS SYSTEM - Licensed by BIG Daishowa”
PGU automatic or PGC hand-pump is required for use with
the powRgrip System.
REGO-FIX.COM 1-800-999-7346
BT+ PG
TypeStandardPart No.
D [mm]
L[mm] Balancing Rings
BT+ 40 / PG 10 x 080 H 4140.71046 16 80 FWR 285
BT+ 40 / PG 10 x 120 H 4140.71066 16 120 FWR 325
BT+ 40 / PG 15 x 080 H 4140.71546 24 80 FWR 285
BT +40 / PG 15 x 120H 4140.71566 24 120 FWR 325
BT+ 40 / PG 25 x 080 H 4140.72546 40 80 FWR 405
BT+ 40 / PG 25 x 120 H 4140.72566 40 120 FWR 405
BT+ 40 / PG 25 x 160 H 4140.72586 40 160 FWR 405/405
TypeStandardPart No.
D [mm]
L[mm] Balancing Rings
BT+ 30 / PG 10 x 080 H 4130.71046 16 80 FWR 285
BT+ 30 / PG 15 x 070 H 4130.71536 24 70 FWR 285
BT+ 30 / PG 25 x 080 H 4130.72546 40 80 FWR 405
BT +30 / PG 25 x 160H 4130.72586 40 160 FWR 405/405
TypeStandardPart No.
D [mm]
L[mm] Balancing Rings
BT+ 50 / PG 25 x 120 H 4150.72566 40 120 FWR 505
BT+ 50 / PG 25 x 160 H 4150.72586 40 160 FWR 505/405
“BIG PLUS SYSTEM - Licensed by BIG Daishowa”
SwissPrecisionTools
Made inSwitzerland
REGO-FIX TOOL CORPORATION7752 Moller Road
Indianapolis, IN 46268 USA
Toll Free: 800.999.7346Phone: 317.870.5959
Fax: 317.870.5955
Email: [email protected]
COL 1097.1 7/11