Swisspump Sewage 50hz

Sewage Pumps 50Hz

Approvals

René Wasmer

President of IQNet

Theodor Zahner

Managing Director SQS

CERTIFICATEIQNet and SQS

hereby certify that the organization

Certified area

Field of activity

has implemented and maintains a

Management Systemwhich fulfills the requirements of the following standard

ISO 9001:2008

Scope No: 29

Issued on: 2008-12-20

Validity date: 2011-12-19

Registration Number: CH-32160

Whole company

Swiss Pump Company AGCH-3645 Thun-Gwatt

Pumps- and Controlsystems

IQNet Partners*:

AENOR Spain AFNOR Certification France AIB-Vinçotte International Belgium ANCE Mexico APCER Portugal CISQ Italy CQC China

CQM China CQS Czech Republic Cro Cert Croatia DQS Holding GmbH Germany DS Denmark ELOT Greece FCAV Brazil

FONDONORMA Venezuela HKQAA Hong Kong China ICONTEC Colombia IMNC Mexico Inspecta Certification Finland IRAM Argentina

JQA Japan KFQ Korea MSZT Hungary Nemko AS Norway NSAI Ireland PCBC Poland Quality Austria Austria RR Russia SII Israel

SIQ Slovenia SIRIM QAS International Malaysia SQS Switzerland SRAC Romania TEST St Petersburg Russia TSE Turkey YUQS Serbia

IQNet is represented in the USA by: AFNOR Certification, CISQ, DQS Holding GmbH and NSAI Inc.

* The list of IQNet partners is valid at the time of issue of this certificate. Updated information is available under www.iqnet-certification.com

3

Contents

Strong Series page 4

N Series 8

NA Series 14

H Series 20

MA Series 28

GP Series 48

SG Series 52

SW Series 58

DC Series 60

DA Series 68

DW Series 74

V Series 80

LA Series 86

Str

on

g •

Se

rie

s

4

Strong Series • Residental Sump Pumps

Power: 1/7 ~1/5 HP (100W ~150W)Max. Head: 32 feet (10m)Max. Capacity: 32 US.GPM (7.2m³/h)

5

Feature

• An excellent architectural design:

stunning streamline design, space saving and robust.

• High capacity performance: Highly efficient 100 W and

150 W motors with low amperage providing energy

savings.

• Weather-proof AAS plastics, Built-in overheat protector,

IP 68 quality approved (highest submersible standard)

waterproof structure, equipped with mechanical seal,

oil seal, and epoxy resin sealed cable base. Durability

bulit into design provides a longer life expectancy.

• Precies aluminum motor housing design, lash water

resistance.

• New vortex design with superior performance.

• Outlet discharge is available in ½ inch, ¾ inch,

and 1 inch.

Application

• Tank Water Circulating, Gardening, Dewatering, Water

Recycles, Water Supply or Drainage. Commercial

Beautification Ponds and residential Ponds.

• Note: Not suitable for seawater, strong acid or alkali liquid.

Definition of model

Strong - 100 F

Type watt float

F : float switch

FV: Vertical float Switch

Specification

�

Strong 100FV Semi open impeller

Str

on

g •

Se

rie

s

6

Performance Curves

Strong 100

Strong 150

Strong 150FStrong 100 Semi open impeller

7

Dimensions

N •

Se

rie

s

8

N Series • Waste Water Pumps

Power: 1/2 ~3 HP (0.4 ~2.2 kW)Max. Head: 99 feet (30 m)Max. Capacity: 290 US.GPM (66 m ³/h)

9

Feature

Application

Definition of model

• A precision manufactured motor is achieved utilizing the highest standard of quality control. To ensure a 100 % quality manufactured motor with stable characteristics and a highest efficiency. All rotor adopted heat treatment method for drive shaft assembling and stator winding impregnated with varnish and heat dried in industrial oven.

• SPCO‘s professional assembly line, complimented with a synthesized production test ensures the highest level of final pump quality.

• Standard accessories include: cable with an epoxy resin sealed water resistant cable base, Auto-cut thermal motor protector, dual mechanical seal and lip seal desion.

• The N-05A is a n extreme practical and low temperature oil filled motor and single seal design pump.

• New N-05L 1/2 HP Maximum capacity 0.3m3/min (15-25% flow increase compare to N-05A/B).

• Waste water. sump drainage. flood control.

• De-watering for fish pond or basement and cellars.

N-05L • N-05A • N-05B • N-21 • N-31

N - 05 A

Type HP Style

Specification

N - 2 1 F

Type Discharge HP Float

Inch

�

Semi-open

Impeller (PA)

Semi-open

Impeller

N •

Se

rie

s

10

Performance Curves

N-31

N-21

N-31N-05A • N-05B

N-05A N-21F

N-05L

11

Dimensions

GRS (Guide Rail System) Dimensions

EF2-84 • EF2-96 • EF3-130

N-05A • N-05B: GRS T2-50 N-21: GRS T2-50

NorminalWater Level

MinimumWater Level

A

B

D

H1

W1

W2

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-2

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-2

W2

N-21 • N-31

NorminalWater Level

MinimumWater Level

AB

C

G

FED

N-05A • N-05B

NorminalWater Level

MinimumWater Level

AB

C

G

FED

N •

Se

rie

s

12

N-32T • N-23 • N-33 • N-43

Specification

Performance Curves

N-33N-23

N-33N-32TN-23

N-43

Enclosed-chanel

Impeller

Semi open

Impeller

13


Dimensions

N-32T • N-33 • N-43

NorminalWater Level

MinimumWater Level

AB

C

GF

E

D

NorminalWater Level

MinimumWater Level

AB

C

GF

ED

DN

DN

N-32

N-23T • N-33: GRS T2-80

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2

O P

N

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2

O P

N

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

F

E

G

H2

DN

K Guide Bars

M16*120L-4

W2

O P

N

N-23 : GRS T-50(+TE-50) N-43 : GRS T-80

EB4-150(145)

EF2-96 • EB3-130(145)

NA

• S

eri

es

14

NA Series • Waste Water Pumps

Power: 2 ~10 HP (1.5 ~7.2 kW)Max. Head: 132 feet (40 m)Max. Capacity: 528 US.GPM (126 m ³/h)

15

Features

Application• Waste Water drainage for all industries.

• Pumping surface water, drainage water and flood water.

• Extraction of water from river and lake.

Pressure- Reducing Design

100NA25.5 & 100NA27.5 pump‘s impeller were designed

in high head pressure reading design will release the

high pressure in volute casing when operating.

50NA21.5 • 50NA22.2 • 80NA21.5 • 80NA22.2 • 80NA23.7

Definition of model

80 - NA 2 1.5 F

Discharge Type Pole Kw Float

mm

Specification

• Equipped with Auto-cut, silicon carbide double

mechanical seal, epoxy cable base treatment.

• Entire cast iron structure and compact design.

• Available with Guide Rail System.

• High head and efficiency for wide range design.

NA

• S

eri

es

16

Performance Curves

80NA22.2

80NA23.780NA22.280NA21.5

50NA21.5

50NA22.2

50NA21.5 80NA23.7F Semi-open

Impeller

17


Dimensions

80NA23.7 : GRS T2-80

NorminalWater Level

MinimumWater Level

AB

DH

1W

1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2

O P

N

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

80NA23.7

NorminalWater Level

MinimumWater Level

A

B

C

GFE

DN

D

80NA21.5 • 80NA22.250NA21.5 • 50NA22.2

NorminalWater Level

MinimumWater Level

A

B

C

GF

E

DND

EB3-150(145)

EF2-96 • EB3-130(145)

80NA21.5 • 80NA22.2 : GRS T2-80

NorminalWater Level

MinimumWater Level

A

B

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-2

W2

M16*120L-2

NA

• S

eri

es

18

Specification

100NA25.5 • 100NA27.5

Performance Curves

100NA25.5

100NA27.5

100NA25.5

Semi-open

Impeller

19

Dimensions


100NA25.5 • 100NA27.5

NorminalWater Level

MinimumWater Level

A

B

C

G

FE

DN

D

100NA25.5 • 100NA27.5 : GRS T100A

E

NorminalWater Level

MinimumWater Level

A

B

D

H1

W1

M

C

F

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2

O P

N

L

EB4-175

H •

Se

rie

s

20

H Series • Sewage Pumps

Power: 1/2 ~3 HP (0.4 ~2.2 kW)Max. Head: 68 feet (21 m)Max. Capacity: 317 US.GPM (66 m³/h)

21

• A precision manufactured motor is achieved utilizing

the highest standard of quality control. To ensure a

100% quality manufactured motor with stable

characteristics and a highest efficiency. All rotor

adopted heat treatment method for drive shaft

assembling and stator winding impregnated with

varnish and heat dried in industrial oven.

• SPCO‘s professional assembly line, complimented

with a synthesized production test ensures the

highest level of final pump quality.

• Standard accessories include: cable with an epoxy

resin sealed water-resistant cable base, AC thermal

motor protector, dual mechanical seal and lip seal

design.

• U type Vortex impeller or P type cutter impeller

design, handle any wastewater or sewage

application with the best de-watering efficiency.

• Full product line range, providing the best service,

with high impact resistance and light weight, for

easy of service and transportation.

• The H-05A is an extremely practical and low

temperature oil filled motor and single seal design

pump.

• Drainage of sewage from the building basements, hotel industry, wastes water from factories.

• Drainage of sewage from industrial process factories.

• Emptying of septic tanks, cesspits and sewage pump stations.

• Pumping surface and drainage water from garages and sprinkler systems.

Application

Features

H-05A • H-05U • H-21U • H-31U

Specification

Definition of model

H - 2 1 T U F

type Discharge HP Style Impeller Float

Inch

H - 05 A

type 1/2HP Style

H •

Se

rie

s

22

Performance Curves

H-05A H-31UH-05U

H-05U

H-31U

H-21U

H-05A

Semi-open

Impeller (PA)

U Type

Impeller

23


H-05A

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

NorminalWater Level

MinimumWater Level

AB

C

G

FE

DN

D

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

H-05U • H-21U H-31

H-05A : GRS T2-50

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-2

W2

NorminalWater Level

MinimumWater Level

A

B

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-2

W2

H-05U • H-21U : GRS T2-50

EF2-84 • EF2-96 • EF3-130

Dimensions

H •

Se

rie

s

24

Specification

Performance Curves

H-33U

2 (1.5) 25

25

H-32TU • H-33U

H-33U

H-32TU

U Type

Impeller

25

Dimensions


H-32TU • H-33U

NorminalWater Level

MinimumWater Level

A

B

C

G

FE

DN

D

H-32TP • H-33P : GRS T2-80

A

B

D

C

458 530

458 530

EB3-130

NorminalWater Level

MinimumWater Level

H1W

1

M

E

G

H2

K Guide Bars

M16*120L-4

W2

O P

N

F

H •

Se

rie

s

26

Specification

Performance Curves

H-05P • H-21P • H-32TP • H-33P

�

H-32TPH-21PF

P Type

Impeller

H-33P

H-32TPH-21PH-05P

27

Dimensions


H-05P • H-21P : GRS T2-50

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M16*120L-2

W2

M10*40L-2

EB3-150

EF2-96 • EB3-130

NorminalWater Level

MinimumWater Level

A

B

C

GFE

DN

D

H-32TP • H-33PH-05P • H-21P

NorminalWater Level

MinimumWater Level

A

B

C

GFE

DN

D

H-32TP • H-33P : GRS T2-80

NorminalWater Level

MinimumWater Level

A

B

D

H1W

1

M

C

FE

G

H2

DN

K Guide Bars

M16*120L-4

W2

O P

N

M10*40L-2

MA

• S

eri

es

28

MA Series • Waster Water Submersible Pumps

Power: 1/2 ~60 HP (0.4 ~45 kW)Max. Head: 137 feet (42 m)Max. Capacity: 8206 US.GPM (1560 m³/h)

29

• Drainage of waste water from the attenuation tank, purifying tank and sewage tank in water treatment plant.

• Drainage of waste water containing fibrous additives from leather factory, dyeing factory and food processing factory.

• sewage management, accumulated water, septic tank, stock farm.

• pumping sewage from single and multifamily dwellings.

• pumping sewage from hotels, restaurants, schools and pulblic buildings.

Application

Features• International standard design: cable, auto-cut,

dry-motor, silicon carbide mechanical seal, high

grade cast iron offering highest quality and

performance

• P/U/E multiple impeller designs to handle sewage

solids and/or fibrous substances .

• Superior abrasion resistant mechanical seal

manufactured with silicon carbide to ensure the

best seal effect.

• Oil lip seal mounted out side of seal chamber stops

solids garthering around seal faces.

• full range offering low to high head and flow

capabilities, with compact and easy installation.

Also available with guide rail system, which allows

automatic remote connection and disconnection

without entering the pit.

50MAU2.4 • 50MAU2.8 • 80MAU21.5 • 80MAU22.2 • 80MAU23.7

Specification

Definition of model

80 MA U 2 1.5 F

Discharge type Impeller Pole kW Float

mm P/U type

MA - 55 A U

type 5.5kW Style Impeller E/U type

MA - 6 10

type Discharge HP inch

MA

• S

eri

es

30

Performance Curves

80MAU23.7

80MAU21.5

50MAU2.4

80MAU22.2

80MAU23.7

50MAU2.8

80MAU21.550MAU2.4F U Type

Impeller

31


Dimensions

50MAU2.4 • 50MAU2.8 : GRS T2-50 80MAU21.5 • 80MAU22.2 : GRS T2-80 80MAU23.7 : GRS T-80C

ø ø

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

80MAU23.7

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

80MAU21.5 • 80MAU22.250MAU2.4 • 50MAU2.8

NorminalWater Level

MinimumWater Level

AB

C

GFE

DN

D

EB3-150

EF2-96 • EB3-130

NorminalWater Level

MinimumWater Level

A

B

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M16*120L-4

W2

O P

N

M10*40L-2

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M16*120L-2

W2

M10*40L-2

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2

O P

N

MA

• S

eri

es

32

Specification

Performance Curves

80MAU21.5L

50MAU2.4L

80MAU22.2L

50MAU2.8L

50MAU2.4L 80MAU21.5L

U Type Vortex Impeller

33

Dimensions

ø ø ø ø

80MAU21.5L • 80MAU22.2L : GRS T2-8050MAU2.4L • 50MAU2.8L : GRS T50D


80MAU21.5L • 80MAU22.2LEB2-96 • EB3-130 50MAU2.4L • 50MAU2.8L

MA

• S

eri

es

34

50MAU4.4 •50MAU4.8 • 80MAU41.5 • 80MAU42.2 • 80MAU43.7

Specification

Performance Curves

50MAU4.8

80MAU41.5

50MAU4.4

80MAU42.2

80MAU43.7

50MAU4.8

80MAU42.2

U Type

Impeller

35


Dimensions

50MAU4.4 • 50MAU4.8 80MAU41.5 80MAU22.2 • 80MAU23.7

50MAU4.4 • 50MAU4.8 : GRS T-50D 80MAU41.5 : GRS T2-80 80MAU22.2 • 80MAU23.7 : GRS T-80C

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

K Guide Bars

M16*120L-4

W2

M10*40L-2

N

O P

NorminalWater Level

MinimumWater Level

A

B

D

H1

W1

M

C

FE

G

H2

DN

K Guide Bars

M16*120L-4

W2

O P

N

NorminalWater Level

MinimumWater Level

AB

D

H1W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2

O P

N

EB3-150(145)

EB2-96 • EB3-130(145)

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

MA

• S

eri

es

36

80MAP21.5 • 80MAP22.2

Specification

Performance Curves

80MAP21.5

80MAP22.2

80MAP21.5

80MAP22.2

P Type

Impeller

37


80MAP21.5 • 80MAP22.2

NorminalWater Level

MinimumWater Level

A

B

C

GF

E

DN

D

80MAP21.5 • 80MAP22.2 : GRS T2-80

A

B

D

C

ø ø

EB3-130

Dimensions

NorminalWater Level

MinimumWater Level

H1

W1

M

F

G

H2

K Guide Bars

M16*120L-2

W2

E

M16*120L-2

M10*40L-2

MA

• S

eri

es

38

80MAP42.2

Specification

Performance Curves

80MAP41.5

100MAP43.7

80MAP43.7

80MAP42.2

80MAP41.5 • 80MAP42.2 • 80MAP43.7 • 100MAP43.7

80MAP41.5

P Type Semi-open Impeller

39


Dimensions

80MAP41.5 : GRS T2-80C

NorminalWater Level

MinimumWater Level

A

B

D

H1

W1

W2

M

C

FE

G

H2

DN

K Guide Bars

M16*120L-4 O P

N

ø ø

80MAP42.2 • 80MAP43.7 • 100 MAP43.780MAP41.5

NorminalWater Level

MinimumWater Level

AB

C

GF

ED

NorminalWater Level

MinimumWater Level

AB

C

GFE

D

DNDN

80MAP42.2 • 80MAP43.7 • 100 MAP43.7 : GRS T-80C

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2N

O P

EB3-150 • F4-175(145)

EB3-130

MA

• S

eri

es

40

MA-55AU • MA-55AE • MA-75E

Specification

Performance Curves

•

MA-75EMA-55AE

MA-55AU

U Type

Impeller

MA-55AE MA-75E

E Type

Impeller

41


MA-55AU • MA-55AE : GRS T-100A

• Note: When used with GRS system, the base foot needs to be dismounted.

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

W2M

C

EF

G

H2

DN

K Guide Bars

M16*120L-4 O P

N

M10*40L-2

MA-75E

NorminalWater Level

MinimumWater Level

AB

C

GFE

D

DN

MA-75E : GRS T-100A

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2

N

O P

L

I

Dimensions

MAU55AU • MA-55AE

NorminalWater Level

MinimumWater Level

A

B

C

GFED

DN

EB4-175

MA

• S

eri

es

42

MA-610 • MA-615 • MA-620 • MA-815 • MA-820

Specification

Performance Curves

•

MA-820MA-815

MA-615

MA-610

MA-620

MA-610 MA-615 MA-820

Enclosed-channel

Impeller

43


Dimensions

NorminalWater Level

MinimumWater Level

AB

CGF

E

DN

D

NorminalWater Level

MinimumWater Level

AB

C

GFE

DN

D

MA-615 • MA-620 MA-815 • MA-820MA-610

MA-610 • MA-615 GRS : T-150 MA-620 : GRS T-150(100) MA-815 • MA-820 GRS : T-200

• Note: When use GRS, the base foot needs to be dismounted

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M12*40L-3

M16*120L-4

W2

O P

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M16*120L-4

W2

O P

N

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

K Guide Bars

M20*200L-4

W2

M12*40L-3

O P

I

M10*40L-2

DN

EB6-240 • EB8-290

NorminalWater Level

MinimumWater Level

AB

C

GFE

DN

D

MA

• S

eri

es

44

Specification

Performance Curves

MA-1050

MA-1040MA-1030S

MA-Large Series

45


Dimensions

MA

• S

eri

es

46

Performance Curves

MA-1660MA-1650

MA-1440MA-1430

Specification

MA-Large Series

47


Dimensions

GP

• S

eri

es

48

GP Series • Submersible Grinder Pumps

Power: 1.3 ~5 HP (1.0 ~3.7 kW)Max. Head: 120 feet (36.5 m)Max. Capacity: 88 US.GPM (19.8 m³/h)

49

• Durable heavy duty finned cast iron construction.

• Standard accessories include : epoxy resin cable base,

dry motor, double mechanical seals, autocut protection,

double ball bearing support shaft and rotor.

• Vortex impeller design prevents clogging by cutting

up articles.

• Radial cutter and cutter ring : corrosion resistant

material, hardened to 55-60 rockwell C.

• Model with float: 32GP type -1.3& 2 &3 HP.

Application

Features

Definition of model

• Used in pressure sewage system.

• Drainage of wastewater from individual residences,

apartment buildings, recreational developments,

motels.

• Transferring wastewater of commercial buildings,

industrial plants, and wastewater sampling, small

hospitals.

• Schools, federal, state and local parks wastewater

drainage.

• To transfer various wastewater and sewage.

Specification

32 GP 2 1.5 F

Discharge type Pole kW Float

mm

GP

• S

eri

es

50

Performance Curves

�

�

Semi-open

Impeller

Semi-open

Impeller

Radial Cutter

& Cutter Ring50GP23.732GP21 32GP21.5

51


Dimensions

32GP21.0 • 32GP21.5 • 32GP22.2 : GRS T-50C

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

W2

M

C

E

F

G

H2

DN

K Guide Bars

M16*120L-4 O P

N

M10*40L-2

¼

¼

¼

50GP22.2 • 50GP23.7: GRS T-80D

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2

N

O P

I

50GP22.2 • 50GP23.7

NorminalWater Level

MinimumWater Level

AB

C

GFE

D

DN

32GP21.0 • 32GP21.5 • 32GP22.2

NorminalWater Level

MinimumWater Level

AB

C

GF

ED

DN

EB2-120(105)

EF1¼ -84

SG

• S

eri

es

52

SG Series • Stainless Steel Submersible Pumps

Power: 1/2 ~5 HP (0.4 ~3.7 kW)Max. Head: 72 feet (21.5 m)Max. Capacity: 290 US.GPM (66 m³/h)

53

• Best structure design, dry motor, double mechanical

seals, equipped Auto-cut protector, pumps casting,

out cover adopt stainless steel material, acidresting

Silicon carbide seals.

• SG and SW series is suitable for all, light acid, corrosive

and / or sea water application.

• Precision casting method produces the highest

quality with a smooth surface finish.

Application

Features

Definition of model

• Water drainage for industries.

• Sanitary sewer, single and multifamilies drainage.

• Water drainage for chemical, pharmaceutical and

metal processing factory.

Viton O-ring are used throughout the pump to give

better pump life in corrosive acid and aggressive media

Viton O-Ring Specification

S W 2 1 A F

Stainless Strainer Discharge HP Style Float

Type Inch

S G 05 A U F

Stainless Footing HP Style Impeller Float

Type Type

S G 3 2 P

Stainless Strainer Discharge HP Impeller

Type Inch type

SG

• S

eri

es

54

Performance Curves

SG-05AU

SG-35U

SG-33U

SG-32USG-21AUSG-05AU

SG-32U SG-35U SG-21AUU Type

Impeller

55


Dimensions

SG-05AU • SG-21AU : GRS ST2-50 SG-32AU • SG-33AU : GRS ST2-80 SG-35U : GRS ST-80

SG-35U

NorminalWater Level

MinimumWater Level

AB

C

GFE

DN

D

SG-32U • SG-33AU

NorminalWater Level

MinimumWater Level

AB

C

GFE

DN

D

SG-05AU • SG 21AU

NorminalWater Level

MinimumWater Level

AB

C

GFE

DN

DESB3-150

ESF2-96

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

K Guide Bars

M16*120L-4

W2

M10*40L-2

O P

DN

N

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M10*40L-2

M16*120L-4

W2

O P

N

NorminalWater Level

MinimumWater Level

AB

D

H1

W1

M

C

EF

G

H2

DN

K Guide Bars

M16*120L-4

W2

O P

N

IM10*40L-2

SG

• S

eri

es

56

Performance Curves

Specification

SG-33P

SG-32P • SG-33P

SG-33P

SG-32P

P Type Semi-open Impeller

SG-32PF

57


Dimensions

SG-32P • SG-33P

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

SG-32P • SG-33P : GRS ST2-80

A

B

D

C

NorminalWater Level

MinimumWater Level

H1

W1

M

F

G

H2

K Guide Bars

M16*120L-4

W2

E

M10*40L-2

N

G P

ESB3-150

SW

• S

eri

es

58

Performance Curves

Ø

Specification

SW-21A

SW-05A

SW-05AFSW-05A

Semi-open

Impeller

SW Series • Stainless Steel Submersible Pumps

59


Dimensions

SW-05A • SW-21A : GRS ST2-50

A

B

D

C

SW-05A • SW-21A

NorminalWater Level

MinimumWater Level

AB

C

GF

E

DN

D

ESF2-96

NorminalWater Level

MinimumWater Level

H1

W1

M

F

G

H2

K Guide Bars

M16*120L-4

W2

E

M10*40L-2

N

G P

DC

• S

eri

es

60

DC Series • Submersible Dewatering Pumps

Power: 1½ ~10 HP (1.1 ~7.5 kW)Max. Head: 135 feet (41.5 m)Max. Capacity: 715 US.GPM (162 m³/h)

61

Application

Features

Definition of model

• Civil engineering, dewatering of tunneling and ground

works, also for storm water sewers.

• Dewatering of fluids contain solid sediments.

• Easy of mobility for use by contractors, installers and

service industries.

• Complete Stainless steel outer cover of

DC 1.5 HP ~ 10 HP (1.1KW ~ 7.5KW) models provide

exceptional design, with light weight structure of less

than 175 Ibs (80Kg) and diameter of 11.2 inches

(286mm) that provide miniature outlook.

Civil engineering, dewatering of tunneling and ground

works, also for storm water sewers.

• Dewatering of fluids contain solid sediments.

• Easy of mobility for use by contractors, installers and

service industries.

DC-215 • 50DCH21.5 • 50DCH22.2

HiCr ImpellerHigh chrome alloy (HiCr) steel hardness of 55-65 HRC

impeller to stand high abrasive application.

Specification

�

100 - DC L 2 7.5

Discharge type Impeller Pole kW

mm type

DC - 2 15 F

type Discharge HP Float inch

DC

• S

eri

es

62

Performance Curves

50DCH22.2

50DCH21.5DC-215

DC-215F Semi-open

Impeller

H Type Semi-open Impeller

50DCH21.5

63

Outlet Connection

Flange Connection

~2 ~2 ~2

Dimensions

Outlet Base Male Thread Type (LOT) Hose (LOH)

Double Flange Set (LKTF) Flange (LOTF)

50DCH21.5 • 50DCH22.2DC-215

MinimumWater Level

B

E

D

C

A

DN

DC

• S

eri

es

64

Performance Curves

Specification

100DCL23.7

80DCN23.7

80DCN22.280DCN21.5

N/L Type Enclosed-channel Impeller

80DCN21.5 100DCL23.7

65

Outlet Connection

~3. ~3.

~3. ~3.

Flange Connection

~ ~~

Dimensions


Flange (LOF) Central & Upper Flange (LKC)Upper Flange (LKF) Central Flange (LOC)

80DCN21.5 • 80DCN22.2 • 80DCN23.7 • 100DCL23.7Cassing Cover

DC

• S

eri

es

66

Specification

Performance Curves

80DCH25.5 • 100DCN25.5 • 100DCN27.5 • 150DCL25.5 • 150DCL27.5

�

150DCL25.5100DCN25.5

100DCN27.5

150DCL27.580DCH25.5

100DCN25.5 150DCL25.5


N/L Type Enclosed-chanel Impeller

150DCL27.5

67

Outlet Connection

Dimensions

~ ~

~ ~

~ ~

~

~

Flange Connection

~7



Casing Cover 80DCH25.5 • 100DCN25.5 • 100DCN27.5 • 150DCL27.5

DA

• S

eri

es

68

DA Series • Submersible Slurry Dewatering Pumps

Power: 2 ~10 HP (1.5 ~7.5 kW)Max. Head: 125 feet (38 m)Max. Capacity: 687 US.GPM (156 m³/h)

69

Application Specification

Features

Definition of model

• Civil engineering, dewatering for tunnel engineering

also for manhole sewer.

• Dewatering fluid contain solid sediment.

• Mobile use for contractors, installers and industry.

80DAN21.5 • 80DAN22.2 • 80DAN23.7

• Design for civil engineering, light weight for easy

portability, double outer casing water cooling motor

make it possible to run the pump to low water level.

• Best waterproof structure, automatic rest motor

protector and double mechanical seal made of silicon

carbide. Durable and leakproof.

• Compact strong design and easy operation in any

place.

• Impeller made of high chrome alloy (HiCr) steel with

a hardness of 55-60 HRc. harden and abrasion resistant.

• Equipped with a cast iron (FCD)agitator to create

powerfull stIring and pumping action for slurry.

100 DA H 2 7.5

Discharge type Impeller Pole kW

mm type

DA - 3 2

type Discharge HP inch

DA

• S

eri

es

70

Performance Curves

80DAN23.7

80DAN22.2

80DAN21.5

80DAN21.5 Agitator N/L Type Enclosed-chanel Impeller

71

~3. ~3.

~3. ~3.

~ ~ ~

Flange Connection

Dimensions

Outlet Connection



80DAN21.5 • 80DAN22.2 * 80DAN23.7

DA

• S

eri

es

72

Specification

80DAH25.5 • 100DAN25.5 • 100DAN27.5 • 150DAL27.5

Performance Curves

150DAL27.5100DAN25.5

80DAH25.5

100DAN27.5

N/L Type Enclosed-chanel Impeller

100DAN25.5 150DAL27.5


73

80DAH25.5 • 100DAN25.5 • 100DAN27.5 • 100DAL27.5

Outlet Connection

~7

Flange Connection

Dimensions



~7.5 ~7.5

~7.5 ~7.5

~7.5 ~7.5

DW

• S

eri

es

74

DW Series • Submersible Dewatering Pumps

Power: 1/2 ~5 HP (1.1 ~3.7 kW)

Max. Head: 82 feet (25 m)Max. Capacity: 502 US.GPM (162 m³/h)

75

Application

Features

Definition of model

DW-43B Enclosed-channelimpeller

• Standard design incorporating:

cable and dry motor equipped with thermal

AutoCut out to prevent motor from over heating.

Abrasion resistant double mechanical seal and

additional oil reservoir seal.

• Superior design of water cooled motor to ensure long

life operation with high efficiency and energy savings.

• For above or below surface water applications

the DW pump strainer can be easily removed and

replaced with a check valve, which allows for

dewatering of underground water applications.

• Aquaculture water supply and drainage.

• Water supply for agricultural irrigation systems

and underground water pumping.

• Landscape, water feature and horticulture irrigation.

• Extraction of water from rivers, lakes and reservoirs.

Specification

DW 4 3 B

type Discharge

HP Style

Inch

DW 2 1.5 F

type Discharge ½ HP Float

Inch

DW

• S

eri

es

76

Performance Curves

DW-45BDW-43B

DW-33B

DW-32B

DW

-215

DW-215DW-45BDW-32B

77

Flange Connection

Dimensions

DW-32B • DW-33B • DW-43B • DW-45BCasing Cover

Double Flange Set Lower Flange

DW

• S

eri

es

78

½

Performance Curves

Specification

DW-410

DW-610DW-68

DW-48

DW-610 N Type Enclosed-chanel Impeller

79

~7.5 ~7.5

~7.5 ~7.5

~7.5 ~7.5

Outlet Connection

Flange Connection

Dimensions



DW-48 • DW-410 • DW-68 • DW-610Casing Cover

V •

Se

rie

s

80

V Series • High Volume Submersible Pumps

Power: ½ ~15 HP (0.4 ~11 kW)Max. Head: 29 ½ feet (9 m)Max. Capacity: 2640 US.GPM (540m³/h)

81

Application

Features

V-41 • V-62 • V-63

Definition of model V - 4 - 1

Type Discharge HP

V - 300 A

Type Discharge Style

Inch

Inch

• Large flow capacities achieved with almost no

vibration or noise by use of Axial & Mix Flow design.

Giving easy operation and energy savings.

• Robust construction and compact design with a dry

motor, double mechanical seal and impeller flow

guide vane for high efficiency.

• Easy handling, energy saving and low maintenance.

• High efficiency motor directly connects to impeller to

achieve best energy saving.

• Pump manufactured with heavy duty housing, cable

leads are isolated by hardened epoxy for water

proofing, double mechanical seal.

• Achieved IP 68 (highest submersible water resistant

protection rating), keeps pumps dust free and water

proof to provide extended pump life and performance.

• Shaft and impeller are precisely balances for quiet and

long life performance.

• 3D computerized design of impeller and vanes

conductive design provide highest pump efficiency

and stability.

• Casted ALBC3 material (aluminum Bronze) impeller,

it has a greatabrasion and corrosion resistance.

• Aquaculture water pumping and drainage for large

volume water applications.

• Water supply for land scape, water features, cooling in

the power plant or drainage for industrial.

• Water extraction from rivers, lakes and reservoirs.

• Flood control or used for large volume dewatering.

Specification

V •

Se

rie

s

82

Performance Curves

V-41 V-63 Axial-flow

Impeller

Axial-flow

Impeller

V-63V-62

V-41

V-305

83

Dimensions

V-41 V-62 • V-63

Flange Connection

Double Flange Set Lower Flange Set

Flange Optional Pump Thread

V •

Se

rie

s

84

Specification

V-200A • V-250A • V-300A

Performance Curves

V-300A

V-250A

V-200A

V-200A V-300A

Axial-flow

Impeller

Mix-flow

Impeller

•

85

V-200 • V-250

Outlet Connection

V-200A • V-250A

V-300A

V-300A

Dimensions

LA

• S

eri

es

86

LA Series • Submersible Axial Pumps

87

Application

Features• High efficiency motor directly connect to impeller

for best energy saving.

• Pump manufacture with firm structure, cable lead

isolated by harden epoxy for water proof, double

mechanical seal, and IP68 dust free and water proof

for long period of performance.

• Shaft and impeller is been precisely balance for

quiet and long life performance.

• Standard protector: Miniature thermal protector,

mechanical seal leakage detector.

other optional protector device can be apply.

• 3D computerizes impeller and vanes conductive

design for higher pump efficiency.

• Water supply or drainage for industrial.

• Water supply for cooling in the power plant.

• Drainage of waste water treatment.

• Used for large volume dewatering.

• Water supply for agriculture irrigation.

• Others: Extraction of water from dock and river.

Specification

Flow analysis Pressure analysis

LA

• S

eri

es

88

~ �

�

�

Performance Curves

LA 2250

LA 2875

LA 28100

LA 2250 LA 28100

89

Submersible Axial Pump Station Advantages

• Sample design and construction for pump station.

• Frugal space easier installing and maintaining.

• Reduce pump station construction and installation

expense.

Protector Description (Optional)

• MTP (Miniature Thermal Protector): Motor winding and bearing bracket can be embed

with MTP to prevent motor operating in dry or

unusual condition cause motor over heating.

• WD (Water Detector): Mechanical Seal chamber, motor chamber, and

wiring chamber can be installing WD to prevent

water enterning in case failure.

If the insufficient shape and dimension of the suction flow zone are adopted at the designe stage, and from hydro-

dynamical point of view there are serve serious problems might arise. Especially eddy current of the surfa, water,

air mixing with water, heavy turbulence of water flow and the formation of stagnant zone. In order to prevent to

reduce such causes of the problems there are sever things need to considered.

• The liquid of suction flow speed should be kept constant (flow speed 0.3 - 0.5m/s.

• Suction flow zone of water depth and floor slop varison of slope angle should be 30 - 45

• Suction flow zone should filling up with concrete.

• In case of two pumps operation, any sudden obstacles at the suction flow zone must

be avoided and maximum diveregent angle must not more than 20 .

Swiss Pump Company AG

Moosweg 36

CH - 3645 Thun - Gwatt

Switzerland

Tel. +41 33 223 11 00

Fax +41 33 223 11 22

[email protected]

www.swisspump.com

Swisspump Sewage 50hz

Documents

Transcript of Swisspump Sewage 50hz