SV8100 System Outline

October, 2008Issue 1-1

- Technical Training -(System Outline)

Ｐage 2 © 2008 by NEC Infrontia Corporation All Rights Reserved

Product ConceptProduct Concept

In-Skin UMS

Embedded VRS / VM

WiFi Access Point (WL series) SoftPhone

Embedded ACD1st / 3rd Party CTI

NetLink

VMS/UMS

O&M

CTI

Networking

Desktop Terminal

Mobility

WiFi Terminal (MH240)

IP-DECT

PC Attendant

WebPRO

PCPRO

AspireNetIP

K-CCIS

UNIVERGE SV8100 is pure IP telephony server enabling TDM configuration providing a rich feature set of Aspire features.

DT300 / DT700


ChassisChassis & Blades& Blades


Chassis & Bus CardsChassis & Bus Cards

Chassis (CHS2U)Chassis (CHS2U)

• 19-inch Rack Mountable design(Wall / Floor / Stand Mounting is also possible)

• 6 Universal Slots (including CPU Slot)• 1 Bus Slot for system expansion• Internal short-term battery space• Power Supply (100-200V) & AC Cable

<Option> 19-inch Rack Bracket, Wall Mount Kit,Floor Mount Kit, Stand Kit,Internal Battery Kit, External Battery Box

Bus Cards (PZBus Cards (PZ--BS10 / PZBS10 / PZ--BS11)BS11)

• Necessary to expand the system capacity• Provide additional 64 Telephony Resources

for Expansion Chassis (PZ-BS10)(DTMF / DT / BT / Caller-ID Receivers, Caller-ID Sender <FSK>)

Power Supply

6 Universal Slots Bus Slot

•• Up to Up to 4 Chassis4 Chassis•• Each Chassis requires AC PowerEach Chassis requires AC Power•• In case more than 2 Chassis, Power In case more than 2 Chassis, Power

ON/OFF should be done ON/OFF should be done from from Expansion Chassis (2Expansion Chassis (2ndnd/3/3rdrd/4/4thth))

Same Chassis

PZ-BS10

PZ-BS10Install to the Main (1st) ChassisPZ-BS11Install to the Expansion (2nd/3rd/4th) Chassis

Internal Battery Space

PZ-BS11

123

456


AccessoriesAccessories for Chassisfor Chassis

CHS BASE UNIT

CHS2U JOINT BRACKET KIT(2pcs / KIT)

CHS2U RACK MOUNT KIT(2pcs / KIT)

CHS1U/2UWALL MOUNT KIT

CHS2U STAND KIT (K)

CHS2U STAND KIT (EXT) x 1 pc

Floor Mounting Wall Mounting 19-inch Rack Mounting

Stand

CHS2U STAND KIT (EXT) x 3 pcs

CHS2U STAND KIT (K)


Backup Battery (1)Backup Battery (1)

Internal Backup BatteryInternal Backup Battery

• Install small batteries into each Chassis• Backup duration is approximately 10 min (24 terminals) • Battery mounting kit and cable are required

CHS2U BATT MTG KIT Internal battery mounting kit

CHS2U BATT CA INT Battery Cable

CHS2U BATT MTG KIT

Back of CHS2U Chassis

CHS2U BATT CA INT

CHS2U BATT

CA INT

Battery itself is local supplyBattery itself is local supply(12V, 2.3Am/H x 2 (12V, 2.3Am/H x 2 pcspcs))

Open

Insert

Either Internal or External Battery can be connected.Either Internal or External Battery can be connected.

Recommended Battery : GS Yuasa NP2.3-12Size (H x W x D) per Battery : 64 x 178 x 34 (mm)


Backup Battery (2)Backup Battery (2)

External Backup BatteryExternal Backup Battery

• Install batteries into the External Backup Battery Box• External Backup Battery Box is required

CHS LARGE BATT BOX External Backup Battery Box(Cables are attached)

Battery itself is local supplyBattery itself is local supply(12V, 7Am/H x 6 (12V, 7Am/H x 6 pcspcs per BOX)per BOX)

• One BOX per Chassis• Backup duration is approximately 3 hours (30 terminals)• One BOX can be shared by several number of Chassis

but backup duration shall become short(Example : 4 Chassis share One BOX : Backup duration is

approximately 45 min)

Battery Tray(Total : 3 sets)

Battery(2 pcs)

Battery TraySuppressor

CHS LARGE BATT BOX

One Battery Tray

• Because of injury from falling equipment,wall mounting the BATT BOX is NOTrecommended.

• Mounting the BATT BOX with CHS BASEUNIT (Floor Mount Kit) on the floor isrecommended.

Either Internal or External Battery can be connected.Either Internal or External Battery can be connected.

Recommended Battery : GS Yuasa NP7-12Size (H x W x D) per Battery : 100 x 151 x 65 (mm)


Central Control UnitCentral Control Unit

CPU (CDCPU (CD--CP00)CP00)

• One blade per system(control Main & Expansion Chassis)

• Install to the 1st Slot of Main Chassis• Main Software is initially stored to the memory

• 32 Telephony Resources(DTMF / DT / BT / Caller-ID Receivers, Caller-ID Sender <FSK>)

• 128 Tone Sender Resources(DTMF / Service Tone / Caller ID <DTMF>)

• 64ch Conference Resources

1 x Ethernet Space for VoIP(Ethernet Port is provided by 32/64/128IPLA)

1 x General Purpose Relay for audio / speaker control

1 x Serial (COM) Not Used (for system debugging purpose)

1 x Load Switch for Software Upgrading, System Initialize

1 x Ethernet (RJ45 10/100M) for Web/PC PRO / SMDR output / CTI / MIS

1 x USB (V1.1) for Software Upgrading, License Uploading

1 x Paging Output for External Paging Speaker

1 x Compact Flash Slot for Embedded VRS/VM(PZ-VM21 and CF Card are required)

1 x Audio Input for External MOH, BGM source

CD-CP00

No Hot Pluggable !!No Hot Pluggable !!(Don(Don’’t insert/remove during power ON)t insert/remove during power ON)


Additional MemoryAdditional Memory

Memory Expansion (PZMemory Expansion (PZ--ME50)ME50)

• Require for system capacity and/or feature expansion• One board per system• Install onto CD-CP00 (Memory board slot)• Main Software is initially stored to the memory (*1)

CD-CP00

CD-CP00 only CD-CP00with PZ-ME50

System Capacity(TDM Port)

Up to 64 Ports Up to 256 Ports (*2)

Expansion Chassis Not working Working

Embedded VRS / Voice Mail Port

8 Ports 16 Ports

NetLink (*3)

(Networked Chassis)Not working Working

(*1) In case the Main Software version is different between CD-CP00 and PZ-ME50, the software on PZ-ME50 shall be loaded to the system.

(*2) In case of more than 256 ports, “Unlimited Port License” is required. (Refer to “System Capacity” page)(*3) Each node in a “NetLink” network requires the PZ-ME50.

PZ-ME50


Embedded VRS / VMEmbedded VRS / VM

Embedded VRS/VM (PZEmbedded VRS/VM (PZ--VM21)VM21)

• Require for VRS (Voice Response System) and/or Voice Mail feature

• One board per system• Install onto CD-CP00 (PZ-VM slot)• V34 (33.6kbps) Analog Modem is initially mounted

(for remote maintenance)• VRS/VM CF Card is separate preparation (see below)

CD-CP00

PZ-VM21

VRS/VM CF Card (AKS VRS / AKS VRSVRS/VM CF Card (AKS VRS / AKS VRS--VM)VM)

Name Description CF Capacity REC Capacity

256MB ---

32 Hours512MB

Port Built-in Prompt Message

AKS VRS OT VRS 8 (w/o PZ-ME50)16 (w/ PZ-ME50)

8 (w/o PZ-ME50)16 (w/ PZ-ME50)

1) English (UK)2) Chinese (Mandarin)

AKS VRS-VM OT VRS + VM 1) English (UK)2) Chinese (Mandarin)

VRS

Note : Label design of CF Card will be changed.

AKS VRS / AKS VRS-VM


VoIPVoIP

VoIP Board (PZVoIP Board (PZ--32/64/128IPLA)32/64/128IPLA)

• Require for VoIP solution• 3 types of IPLA (32ch / 64ch / 128ch)• One board per system• Install onto CD-CP00 (VoIP board slot)• Ethernet Port (10/100/1000M) for RTP/RTCP packets

CD-CP00

PZ-32/64/128IPLA

““IP LicenseIP License”” is required for IP Trunk & Terminal connection.is required for IP Trunk & Terminal connection.


Terminal Blade (1)Terminal Blade (1)

Digital Terminal Blade (CDDigital Terminal Blade (CD--8/16DLCA)8/16DLCA)

• 8 or 16 digital extension ports (used for Digital Terminal,DSS Console, SLTAD, PGDAD, Aspire Terminal / DSS)

• 2 (8DLCA) or 4 (16DLCA) RJ61 connectors(4 ports / one RJ61)

• Blade status LEDs (Live LED, Busy/Idle LED)• -48V feeding• Install to the universal slot• Hot Pluggable• Daughter Board Connector for PZ-8DLCB

(only CD-8DLCA)

Digital Terminal Daughter Board (PZDigital Terminal Daughter Board (PZ--8DLCB)8DLCB)

• Additional 8 digital extension ports (used for Digital Terminal,DSS Console, SLTAD, PGDAD, Aspire Terminal / DSS)

• Mounted onto CD-8DLCA• Two RJ61 connectors (4 ports / one RJ61)• -48V feeding

Front Panel View



Analog Terminal Blade (CDAnalog Terminal Blade (CD--4/8LCA)4/8LCA)

• 4 or 8 analog extension ports(used for SLT, Fax machine, Analog Modem)

• 1 (4LCA) or 2 (8LCA) RJ61 connectors(4 ports / one RJ61)

• Blade status LEDs (Live LED, Busy/Idle LED)• -24V feeding (Current : 25mA only)• Support MW Lamp and Caller-ID Transmission • Install to the universal slot• Hot Pluggable• Daughter Board Connector for PZ-4LCA / PZ-8LCE

Analog Terminal Daughter Board (PZAnalog Terminal Daughter Board (PZ--4LCA / 8LCE)4LCA / 8LCE)

• Additional 4 or 8 analog extension ports• Mounted onto CD-4/8LCA• 1 (PZ-4LCA) or 2 (PZ-8LCE)

RJ61 connectors (4 ports / one RJ61)• -24V feeding (Current : 25mA only)• Support MW Lamp and Caller-ID

Transmission

Front Panel View

Blade D/Board

+ =

=

=

=

+++

Total Ports / Slot

CD-4LCA PZ-4LCA 8

CD-4LCA PZ-8LCE 12

CD-8LCA PZ-4LCA 12

CD-8LCA PZ-8LCE 16



Digital & Analog Terminal Combination Blade (CDDigital & Analog Terminal Combination Blade (CD--LTA)LTA)

• One CD-LTA blade per Chassis• 8 digital and 2 analog extension ports• 2 (for digital) and 1 (for analog) RJ61 connectors

(4 ports / one RJ61)• -48V feeding at digital ports• -24V feeding (Current : 25mA) at analog ports• Blade status LEDs (Live LED, Busy/Idle LED)• Install to the universal slot• Hot Pluggable• Daughter Board Connector for :

> PZ-4COTE (4 analog trunk daughter board)> PZ-2BRIA (2 Euro-ISDN BRI daughter board)

Front Panel View

TBDTBDTBD


Trunk Blade (1)Trunk Blade (1)

Analog Trunk Blade (CDAnalog Trunk Blade (CD--4COTA)4COTA)

• 4 analog trunk ports (Loop Start)• One RJ61 connector (4 ports / one RJ61)• One RJ61 connector for 2 Power Failure

Transfer circuits (for No.1 and No.2 port)• Blade status LEDs (Live LED, Busy/Idle LED)• Support Caller-ID and Polarity Reverse detection • Install to the universal slot• Hot Pluggable• Daughter Board Connector for PZ-4COTE

Analog Trunk Daughter Board (PZAnalog Trunk Daughter Board (PZ--4COTE)4COTE)

• Additional 4 analog trunk ports (Loop Start)• Mounted onto CD-4COTA / CD-LTA• One RJ61 connectors (4 ports / one RJ61)• Support Caller-ID and Polarity Reverse detection

Front Panel View


Trunk Blade (2)Trunk Blade (2)

Analog E&M Blade (CDAnalog E&M Blade (CD--4ODTB)4ODTB)

• 4 analog E&M Tie trunk ports• Four RJ61 connectors (1 port / one RJ61)• Support 2-wire / 4-wire circuits (Soft Switch)• Support Type I and V• Blade status LEDs (Live LED, Busy/Idle LED)• Install to the universal slot• Hot Pluggable

Analog DID Trunk / OPX Blade (CDAnalog DID Trunk / OPX Blade (CD--4DIOPB)4DIOPB)

Front Panel View

• 4 analog DID trunk / OPX (off-premise SLT extension)ports (Max 6.4 km <0.5mm>)

• One RJ61 connector (4 ports / one RJ61)• -48V feeding• Blade status LEDs (Live LED, Busy/Idle LED)• Install to the universal slot• Hot Pluggable

Front Panel View


ISDN Blade (1)ISDN Blade (1)

EuroEuro--ISDN BRI Blade (CDISDN BRI Blade (CD--2BRIA)2BRIA)

• 2 BRI (2B+D) ports• Two RJ45 connectors (1 port / one RJ45)• Support T / S-point connection (Soft Switch)• Support power feeding for S-point (On/Off : Soft Switch)• Blade status LEDs (Live LED, Busy/Idle LED)• Install to the universal slot• Hot Pluggable• Daughter Board Connector for PZ-2BRIA

EuroEuro--ISDN BRI Daughter Board (PZISDN BRI Daughter Board (PZ--2BRIA)2BRIA)

• Additional 2 BRI (2B+D) ports• Mounted onto CD-2BRIA / CD-LTA• Two RJ45 connectors (1 port / one RJ45)• Support T / S-point connection (Soft Switch)• Support power feeding for S-point (On/Off : Soft Switch)

Front Panel View


ISDN Blade (2)ISDN Blade (2)

EuroEuro--ISDN PRI Blade (CDISDN PRI Blade (CD--PRTA)PRTA)

• 1 PRI (30B+D) port• One RJ45 connector (1 port / one RJ45)• Support T / S-point connection (Soft Switch)• Blade status LEDs (Live LED, Busy/Idle LED)• Install to the universal slot• Hot Pluggable

Front Panel View



Application Blade (1)Application Blade (1)

InIn--Skin VM/UMS Blade (CDSkin VM/UMS Blade (CD--VM00)VM00)

• One 10/100M Ethernet Port (for Software Upgrading, UMS, etc)• Two USB ports (to connect USB Keyboard, USB Memory, etc)• One VGA Connector (to connect the Monitor)• One Serial Port (for Blade debugging purpose)• VM/UMS CF Card is separate preparation• Blade status LEDs (Live LED, Busy/Idle LED)• Install to the universal slot

UMS CF Card (AKS UMUMS CF Card (AKS UM--2G/8G)2G/8G)

Name Description CF Capacity REC Capacity

2GB 125 Hours

550 Hours8GB

Port Built-in Prompt Message

AKS UM-2G OT UMS Max 16(License)

Max 16(License)

1) English (UK)2) Chinese (Mandarin)

AKS UM-8G OT UMS 1) English (UK)2) Chinese (Mandarin)

Note : Label design of CF Card will be changed.

TBDTBDTBD



Conference Bridge Blade (CDConference Bridge Blade (CD--PVAA)PVAA)

• One CF Card (for Conference, IVR, etc)• One USB ports (to connect USB Memory, etc)• One 10/100M Ethernet Port• Blade status LEDs (Live LED, Busy/Idle LED)• Install to the universal slot

Front Panel View


TBDTBDTBD



InIn--Skin Router Blade (CDSkin Router Blade (CD--RTB)RTB)

• Designed for high quality voice calls due to bandwidthmanagement based on voice traffic prioritization andtraffic shaping for data

• Four 10/100M managed Ethernet Port(with VLAN <IEEE802.1Q> and port mirroring capabilities)

• One “WAN” port• One “T1” port• Blade status LEDs (Live LED)• Reset Switch• Install to the universal slot

• Support packet inspection firewall and VPN based security• Hardware assisted IPSec encryption hides data• Remote monitoring and troubleshooting made easy with

detailed statistics including MOS (Mean Opinion Score)


CD-RTB has local setup GUI

TBDTBDTBD



InIn--Skin GSkin G--bit bit PoEPoE Switch Blade (CDSwitch Blade (CD--ETIA)ETIA)

• Eight Gigabit managed Ethernet Port• Support IEEE802.3af PoE on all ports• Provide Lauer-2 Switching, QoS, VLAN

<IEEE802.1Q> and port mirroring capabilities• Provide Switch Management feature through

Web-based GUI• Per Port status LEDs (Link / Speed & Activity)• Install to the universal slot


Front Panel View TBDTBDTBD


Desktop TerminalsDesktop Terminals


Terminal FeaturesTerminal Features

Menu Cursor Key

Customizable Side Panels

Feature Keys

Programmable Function Keys

Soft Keys

Message Indicator LED(Digital : 3 colors)(IP : 7 colors)

Full dot matrix with backlit LCD(IP : Open XML I/F)

Security Key (IP)

Full-Duplex Handsfree

DESI-Less type

Backlit Dial Pad

Bluetooth Cordless Handset

8 Programmable Function Keys

Dot matrix with backlit LCD

Menu Cursor Key

Backlit Dial Pad


DT300 Series (Digital Terminals)DT300 Series (Digital Terminals)

DTL-2E-1

2 Keys Digital Terminalwithout LCD

DTL-6DE-1 DTL-12D-1 DTL-24D-1

6 Keys Digital Terminal 12 Keys Digital Terminal 24 Keys Digital Terminal

DTL-32D-1

32 Keys Digital Terminal

DTL-8LD-1

DESI-Less Digital Terminal

DTL-12PA-1

12 Keys Digital Terminalwith PF Adapter

DTL-12BT-1

12 Keys Digital Terminal with Bluetooth Cordless

Handset

“White” is available “White” is available

“White” is available TBDTBDTBD TBDTBDTBD


DT300 Series Spec Table (1)DT300 Series Spec Table (1)Name DTL-2E-1 DTL-6DE-1 DTL-12D-1 DTL-24D-1

Black

Yes (24 digits x 3 lines)

6

Yes

Yes

Yes (3 colors)

Half-duplex

No

No

Yes

No

No

Headset No No Yes Yes

4-steps (Base)

Yes

Black / White

Yes(168x55 dot matrix

w/o backlit)

12

Yes

Yes

Yes (3 colors)

Full-duplex

Yes

Yes

Yes

Yes

Yes

4-steps (Base)Free (LCD)

Yes

Color Line-Up Black Black / White

Menu Cursor Key No (VOL Keys only) Yes

DSS Console* No Yes

Exchangeable Cradle No Yes

Angle Adjustment 4-steps (Base) 4-steps (Base)Free (LCD)

Wall Mounting Yes Yes

Bottom Unit connectivity No Yes

LCD No Yes(168x55 dot matrix

w/o backlit)

Backlit Dial Pad No Yes

8LK-L connectivity No Yes

Programmable Keys 2 24

Soft Keys No Yes

LED Indication Yes (3 colors) Yes (3 colors)

Handsfree Half-duplex Full-duplex

* DSS Console is connected to one of Digital Terminal Ports.


DT300 Series Spec Table (2)DT300 Series Spec Table (2)Name DTL-32D-1 DTL-8LD-1 DTL-12PA-1 DTL-12BT-1

Black / White


with backlit x 2)

DESI-Less(8 keys x 4 pages)

Yes

Yes

Yes (3 colors)

Full-duplex

Yes

Yes

Yes

Yes

Yes

Headset Yes Yes Yes Yes


Yes

Black


w/o backlit)

12

Yes

Yes

Yes (3 colors)

Full-duplex

No

Yes

Yes

Yes

YesPSA (Power Failure Transfer) Cradle is initially installed


Yes

Color Line-Up Black Black

Menu Cursor Key Yes Yes

DSS Console* N/A ** Yes

Exchangeable Cradle Yes YesBluetooth Cordless handset and Cradle are initially installed

Angle Adjustment 4-steps (Base)Free (LCD)



Bottom Unit connectivity Yes No ***

LCD Yes(168x55 dot matrix

w/o backlit)


w/o backlit)

Backlit Dial Pad Yes Yes

8LK-L connectivity N/A (initially connected) Yes

Programmable Keys 32 (24D + 8LK) 12

Soft Keys Yes Yes


Handsfree Full-duplex Full-duplex

* DSS Console is connected to one of Digital Terminal Ports.** 8LK-L is initially connected to the console I/F on DTL-32D-1 TEL, therefore DSS Console can not be attached to the terminal.

*** Any Bottom Adapters (ADA, APR, BHA) can NOT be installed together with Bluetooth Cordless handset and Cradle (BCH-L).


DT700 Series (IP Terminals)DT700 Series (IP Terminals)

ITL-2E-1

2 Keys IP Terminalwithout LCD

ITL-6DE-1 ITL-12D-1 ITL-24D-1

6 Keys IP Terminal 12 Keys IP Terminal 24 Keys IP Terminal

ITL-32D-1

32 Keys IP Terminal

ITL-8LD-1

DESI-Less IP Terminal

ITL-12PA-1

12 Keys IP Terminalwith PF Adapter

ITL-12BT-1

12 Keys IP Terminal with Bluetooth Cordless

Handset

“White” is available

“White” is available “White” is available

TBDTBDTBD TBDTBDTBD


DT700 Spec Table (1)DT700 Spec Table (1)Name ITL-2E-1 ITL-6DE-1 ITL-12D-1 ITL-24D-1

Black

Yes (168x41 full dot black & White

w/o backlit)

6

Yes

Yes

Yes (3 colors)

Full-duplex

No

Protection (Security) Key No Yes Yes Yes

Network Interface 10/100BASE-T : 2 ports 10/100BASE-T : 2 ports 10/100BASE-T : 2 ports 10/100BASE-T : 2 ports

Open XML Interface No Yes (limited) Yes Yes

CODEC G.711 / G.729a G.711 / G.729a G.711 / G.729a / G.722 G.711 / G.729a / G.722

Headset No No Yes Yes

Power Feeding PoE (IEEE 802.3af) or AC/DC Adapter

PoE (IEEE 802.3af) or AC/DC Adapter



No

No

No

No

4-steps (Base)

Yes

Black / White

Yes(224x96 full dot gray scale

with backlit)

12

Yes

Yes

Yes (7 colors)

Full-duplex

Yes

Yes

Yes

Yes (w/o APR)

Yes

4-steps (Base) / Free (LCD)

Yes

Color Line-Up Black Black / White

Menu Cursor Key No (VOL Keys only) Yes

DSS Console connectivity No Yes

Exchangeable Cradle No Yes

Angle Adjustment 4-steps (Base) 4-steps (Base) / Free (LCD)


Bottom Unit connectivity No Yes (w/o APR)

LCD No Yes(224x96 full dot gray scale

with backlit)

Backlit Dial Pad No Yes

8LK-L connectivity No Yes

Programmable Keys 2 24

Soft Keys No Yes




DT700 Spec Table (2)DT700 Spec Table (2)Name ITL-32D-1 ITL-8LD-1 ITL-12PA-1 ITL-12BT-1

Black / White


with backlit x 2)

DESI-Less (8 keys x 4 pages)

Yes

Yes

Yes (7 colors)

Full-duplex

Yes

Protection (Security) Key Yes Yes Yes Yes

Network Interface 10/100BASE-T : 2 ports 10/100BASE-T : 2 ports 10/100BASE-T : 2 ports 10/100BASE-T : 2 ports

Open XML Interface Yes Yes Yes Yes

CODEC G.711 / G.729a / G.722 G.711 / G.729a / G.722 G.711 / G.729a / G.722 G.711 / G.729a / G.722

Headset Yes Yes Yes Yes





Yes

Yes

Yes (w/o APR)

Yes


Yes

Black


with backlit)

12

Yes

Yes

Yes (7 colors)

Full-duplex

No

Yes

Yes

Yes (w/o APR)

YesPSA (Power Failure Transfer) Cradle is initially installed


Yes

Color Line-Up Black Black

Menu Cursor Key Yes Yes

DSS Console connectivity N/A * Yes

Exchangeable Cradle Yes YesBluetooth Cordless handset and Cradle are initially installed

Angle Adjustment 4-steps (Base) / Free (LCD) 4-steps (Base) / Free (LCD)


Bottom Unit connectivity Yes (w/o APR) No **

LCD Yes(224x96 full dot gray scale

with backlit)


with backlit)

Backlit Dial Pad Yes Yes

8LK-L connectivity N/A (initially connected) Yes

Programmable Keys 32 (24D + 8LK) 12

Soft Keys Yes Yes



* 8LK-L is initially connected to the console I/F on ITL-32D-1 TEL, therefore DSS Console can not be connected to the terminal.** Any Bottom Adapters (ADA, APR, BHA) can NOT be installed together with Bluetooth Cordless handset and Cradle (BCH-L).


Flagship IP TerminalFlagship IP TerminalName ITL-320C-2

Protection (Security) Key Yes

Network Interface 10/100BASE-T : 2 ports

Open XML Interface Yes

CODEC G.711 / G.729a / G.722

Headset Yes


Color Line-Up Black

Menu Cursor Key Yes

DSS Console connectivity Yes

Exchangeable Cradle Yes

Angle Adjustment 4-steps (Base & LCD)

Wall Mounting Yes

Bottom Unit connectivity Yes (w/o APR)

LCD Yes(5.7 inch TFT QVGA 16 bit color with

Backlit Touch Panel)

Backlit Dial Pad Yes

8LK-L connectivity Yes

Programmable Keys N/A

Soft Keys Yes

LED Indication Yes (7 colors)

Handsfree Full-duplex

TBDTBDTBD


“Desktop Application Suite” is a suite of software that combines the telephony functionality of IP Softphone (SP310), PC Assistant and PC Attendant products.

Through licensing control and user selection, the application can be tailored to meet the needs of a variety of end users. Three additional utilities are provided as part of the desktop application suite.

Configuration WizardSteps the user through the process of providing thesettings that are required to start the desktop application.

Outlook Add-InAllows the user to dial out and perform screen popsthrough the Contacts folder within Outlook.

Video Test ToolHelps verify that the SP310 can communicate with andutilize the video camera connected to the PC.

SoftphoneSoftphone

TBDTBDTBDDesktop Application SuiteDesktop Application Suite

Full Screen Mode for Attendant

Tool Bar Mode

Compact Phone Mode

Desktop Terminal Image Mode

Open


Optional Items for TerminalOptional Items for Terminal

Desktop Terminals have following interfaces to accommodate various options.

Handset I/F Data I/F for Consoles

Data I/F for IP Terminals(Future Use)

Voice & Data I/F (Back of Terminal)

Item List (Console)

DCL-60-1 60 Keys DSS Console (IP Terminal)

8LK-L Additional 8 Keys Unit

Item List (Bottom Adapter)

Bluetooth AdapterBHA-L UNIT

Analog Terminal Adapter with RingerAPR-L UNIT

Recording Jack AdapterADA-L UNIT

Item List (Cradle)

Bluetooth Cordless Handset Cradle

BCH-L UNIT

Power Failure Transfer Cradle

Power Save Adapter


Handset Cradle OptionsHandset Cradle Options

Power Saving Adapter (PSA) BCH-LColor Line-Up Black / White Black

Bluetooth Cordless Handset with cradle

Bluetooth V2.0, Class 1

Bluetooth Cordless HandsetLCD 120x82 dot matrix Black & White

LCD with Backlit LCDProgrammable Keys 8

Soft Keys No

Menu Cursor Key Yes

LED Indication No

Backlit Dial Pad Yes

Headset Jack Yes

Distance from Cradle Max 50m (depend on the environment)

Battery Length 8 hours (Talking) / 15 hours (Standby)

Power Feeding from Cradle

Digital Terminal : RequiredIP Terminal : Not Required

Power Failure Transfer cradle to provide survivability in case of power failure or data network down

RJ11 (Analog Port)

Features - VOL Keys : to adjust the volume at Handset

- PSTN/PBX Switch : to forcibly change the IP Terminal toPSA mode in case the IP Terminal itself is backed up byUPS.

- Dial Mode Switch : to change either DTMF or DP (10pps).

<Note>- Handset itself is not attached to the PSA (only cradle).Use original handset with PSA.

- Dial Pad must be replaced because of no backlit servicein case the PSA is connected. (No-backlit type Dial Pad isattached to PSA)

AC-DC Adapter Not Required

Name

Description

Interface

Note : Any Bottom Adapters (ADA, APR, BHA) can NOT be installed together with BCH-L.

TBDTBDTBD TBDTBDTBD


Name 8LK-L DCL-60-1Color Line-Up Black / White Black / White

Description Additional 8 Programmable Function Key console 60 Keys DSS Console

HardwareInstallation

Attach the terminal Attach the terminal

Cabling Connect to the terminal <Digital> Connect to one of DLCA (Digital Terminal) port<IP> Connect to the terminal

AC-DC Adapter Not Required <Digital> Not Required <IP> Required

Name ADA-L

Recording Jack Adapter for Handset / Headset / Speaker phone speech recording to the external recording device

Mini-Pin Jack x 2

AC-DC Adapter Not Required Not Required(AC/DC Adapter is required in case the total cable length between system and connected terminal is more than 900m.)

Not Required(AC/DC Adapter is required in case the total cable length between system and connected terminal is more than 900m.)

BHA-L

Description

APR-L

Analog Terminal (SLT, Fax, Modem) Adapter with Ringer

Bluetooth HUB Adaptor (using World-Wide common Bluetooth Technology) to connect the Bluetooth peripherals (Headset, Mobile phone)

Interface Bluetooth V2.0, Class 1RJ11 x 1

Console & Bottom Adapter OptionsConsole & Bottom Adapter Options

TBDTBDTBD


Optional Items ConnectivityOptional Items Connectivity

Handset Cradle Console Bottom Adapter

8LK-L ADA-L

---

---

✓

✓

✓

✓

✓

---

---

---

✓

✓

✓

✓

✓

---

✓

---

---

✓

✓

N/A

✓

✓

✓

---

---

✓

✓

N/A

✓

✓

✓

✓

DCL-60-1 APR-L

---

✓

✓

✓

N/A

✓

✓

✓

---

---

✓

✓

N/A

✓

✓

✓

✓

---

---

✓

✓

✓

✓

✓

---

---

---

---

---

---

---

---

---

---

Terminal

PSA BCH-L BHA-L

Digital DTL-2E-1 ---

---

✓

✓

✓

✓

N/A

✓

---

---

✓

✓

✓

✓

N/A

---

✓

DTL-6DE-1

✓

---

---

✓

✓

✓

✓

✓

N/A

---

---

✓

✓

✓

---

✓

DTL-12D-1 ✓

✓

IP

N/A

DTL-24D-1 ✓

DTL-32D-1 ✓

DTL-8LD-1 ✓

DTL-12PA-1 ✓

DTL-12BT-1 ---

ITL-24D-1 ✓

ITL-32D-1 ✓

ITL-8LD-1 ✓

ITL-12PA-1

✓

✓

ITL-12BT-1 ---

ITL-320C-1 ✓

ITL-2E-1 ---

ITL-6DE-1 ---

ITL-12D-1 ✓

✓: Available --- : Not Available N/A : Not Applicable

Note : Any Bottom Adapters (ADA, APR, BHA) can NOT be installed together with BCH-L.


Optional AdaptersOptional Adapters

Name IP1E-1SLTAD

Description Single Line Telephone Adapter for Digital Terminal Port

2 ports External Paging / Doorphone / Audio Adapter

Doorphone Box

Cabling Connect to one of DLCA (Digital Terminal) Port

Connect to one of DLCA (Digital Terminal) Port

Connect to the 2PGDAD Adapter

AC-DC Adapter Not Required Not Required Not Required

DP-D-1AIP1WW-2PGDAD

Connection ImageConnection Image

Digital Terminal

DSS Console

8LKAdapter / Cradle

Digital Terminal SLT SLTAD PGDAD

Doorphone

Speaker

DLCA Blade


Color Side Panel OptionsColor Side Panel Options

Hold a customer-designed paper with Clear panels

Print the Company Logo Free Design

Clear

Silver Red Blue Wood(initially attached)

Color Side Panel options are available for all types of terminals.


LicenseLicense SchemeScheme


Basic Licensing FlowBasic Licensing Flow

Placing an order

Getting the License File with Activation Code

Inputting both Hardware and Software Key-Code

Delivering the Software Key-Code

NEC Affiliates / NEC-i AP

NEC-i License Authentication System

Dealer

Getting theHardware Key-Code

Uploading the License File with Activation Code

SV8100

Activate !Activate !

Several features on SV8100 need to have the license to activate permanently.

Note : Details of ordering process and Authentication System operation will be informed separately.

End User


FAQ for Licensing (1)FAQ for Licensing (1)

What is Software Key-Code?It is unique number and is generated for each license order.Several feature’s licenses can be contained into one Software Key-Code.

What is Hardware Key-Code?It is unique number for each hardware (CPU), and is indicated on the carton box and CPU blade. It can be checked from Display type Desktop Terminal by simple operation as well. (Press “Feature” key and “3” during on-hook condition)

How to access the License Authentication System?Each Dealer / Distributor must access to the License Portal Site via Internet.NEC-i will provide the User ID and Password to each Dealer / Distributor.(Details will be informed separately.)



How to upload the License to the system?There are following methods.<From USB Drive> Store the received License Files into the USB Drive, and

connect it to the USB port at CPU blade. Enter the PRG mode and execute the uploading operation.

<From Web PRO> Store the received License Files on your PC, and upload it by using Web PRO.

<From Terminal> Enter the PRG mode and manually key-in the License Code from Display type Desktop Terminal.

USB Memory must be more than 64MB without any security feature.



Does the system have Free-License for Demo?Free-License is initially included into the CPU.

There are following notes for Free-License.- Validity of Free-License is 60 Days.- All features (except Unlimited Port License) are temporally available during

this period.- Unlimited Port License will be temporally available when PRG90-55 is set to

“1 : ON”.- Count down of Free-License days starts when the system starts up.- Count down of Free-License days will stop if the system is switched off.- Period of validity can not be reset even if the system did COLD start and/or

software upgrading.- Once the validity is expired and the official licenses are not uploaded, all

licensed features will stop completely.


License Feature List (1)License Feature List (1)

Category License Feature QTY

System Capacity Unlimited Ports 1 (Service ON)

CTI 1st Party CTI (over Ethernet) 1-128 (No. of Client)

ACD ACD Client 1-512 (No. of Client)

VoIP IP Trunk (SIP / H323) 1-128 (No. of Trunk)

Networking Net-Link 1-49 (No. of Remote Node)

Application Interface Hotel / Motel (including PMS) 1 (Service ON)

Desktop Application Softphone (Basic) 1-128 (No. of User)

Softphone Enhancement (White Board, IM, etc) 1-128 (No. of User)

Assistant Upgrade (Softphone to Assistant) 1-128 (No. of User)

Attendant Upgrade (Assistant to Attendant) 1-128 (No. of User)

OAI Activation 1 (Service ON)

K-CCIS over IP 1-128 (No. of Channel)

AspireNet over IP 1-128 (No. of Channel)

IP Terminal (SIP-MLT / Softphone) 1-512 (No. of Terminal)

IP Terminal (SIP-MLT / Softphone / SIP SLT / 3rd Party) 1-512 (No. of Terminal)

ACD P-Event (for MIS) 1 (Service ON)

1 (Service ON)3rd Party CTI


License Feature List (2)License Feature List (2)

Category License Feature QTY

Embedded VRS/VM VRS/VM Multi-Language 1-20 (No. of Language)

In-Skin UMS UMS LITE Mail Port 2/4/8/16 (No. of Channel)

2 port LITE Mail Upgrade kit 1 (Service ON)

UMS XML Mail Manager 1-512 (No. of Manager)

Upgrade license from LITE Mail to FULL UMS 1 (Service ON)

UMS Port 4/8/16 (No. of Channel)

UMS Fax Port 1-4 (No. of Channel)

UMS TTS Port (TBD) 1-6 (No. of Channel)

UMS Video Mail Client 1/5 (No. of Client)

In-Skin PVA Conference Channel 1-16 (No. of Channel)

IVR Channel 1-16 (No. of Channel)

UMS Client 1/4/8/16/32 (No. of Client)

UMS Multi-Language 1-25 (No. of Language)

UMS Hospitality / PMS 1 (Service ON)

UMS Hospitality Language 1-10 (No. of Language)

UMS Amis / Plus Net 1 (Service ON)

UMS TTS Language (TBD) 1-10 (No. of Language)


System CapacitySystem Capacity


System Capacity (1)System Capacity (1)

Extension

Software PortSoftware Port(on CD(on CD--CP00)CP00) Max 512 (TDM / IP / Wireless terminals) Max 256 (Virtual EXT)

Max 200 (TDM / IP trunks)Trunk

No. of Chassis 1 2 3 4

No. of Slot 5 11 17

No. of TDM 111 222 333 444

Trunk IP (SIP / H323) 200 200

2PGDAD --- --- --- --- 56

1SLTAD --- --- --- --- 512

200 200 200

136

136

180

68

272

272

68

---

APR (SLT ADP) --- --- --- --- 256

IP Terminal 512 512 512 512 512

System Max

(NetLink)23

184

184

180

92

368

368

92

Analog 40 88

---

ISDN BRI (ch) 40 88

200

200

180

200

512

512

512

ISDN PRI (ch) 90 180

Analog E&M 20 44

Terminal Digital Terminal 80 176

32

SLT 80 176

SLT (OPX) 20 44

DSS --- ---80

111

512

200

512

200

Total TDM ports must be less than 111 per ChassisMaximum capacity is 200 Trunks and 512 Extensions

176

222

512

200

272

333

512

200

368

444

512

200

CapacityCapacity

DSS, 2PGDAD and 1SLTAD occupy the Digital portAPR occupies one of software extension portsNumber of terminals depend on the Power Calculation


System Capacity (2)System Capacity (2)

TDM PortTDM Port

NetLink(IP Connection)

Remote Node

64 Ports 256 Ports 444 Ports

CD-CP00

PZ-ME50

Unlimited Port License

xxxx-xxxx

PZ-IPLA NetLink License

xxxx-xxxx

CD-CP00 PZ-ME50 PZ-IPLA

712 Ports


Appendix : Appendix : NetLinkNetLink

What is What is NetLinkNetLink??

• Establish a single image systemsingle image system by using IP connection (LAN / WAN) between severalnumber of SV8100 systems.

• Control whole nodes from “Primary” System.• Maximum System Capacity is 200 Trunks / 512 Extensions.• Up to 16 nodes can be connected to a NetLink.• Support “Full Features Transparency”. Database are synchronized automatically via TCP

periodically between Primary and Remote system’s CPU (CD-CP00).• Support “Survivability (Fail-Over)” to prevent the whole network down. Enabling the pre-

programmed “Secondary” system to replace “Primary” system when the failure occurs.

IP Network

Primary

CD-CP00

Remote Remote


Power Based Calculator Chart (1)Power Based Calculator Chart (1)

Blade Power FactorBlade Power Factor

Item Description Power Factor

CD-CP00 CPU blade

32ch VoIP board

64ch VoIP board

128ch VoIP board

In-Skin Voice Mail blade

Conference bridge blade

In-Skin Router blade

In-Skin Gigabit Switching Hub

Analog Trunk, Digital Terminal, etc

1

PZ-32IPLA 1

PZ-64IPLA 2

PZ-128IPLA 2

CD-VM00 2

CD-PVAA 1

CD-RTB 2

CD-ETIA 2

Other blades 0

Total =< 7 points7 points per Chassis

SV8100 needs to calculate 2 types of “Power Calculation” (Blade and Terminal) depending on the system configuration.



Terminal Power FactorTerminal Power Factor

Category Item Description Power Factor

SLT Analog Single Line TelephoneDigitalTerminal

DTL-12PA-1 12 Keys Digital Terminal with Power Failure Adapter 2

Console

8LK-L Additional 8 Keys Unit 0

BHA-L UNIT Bluetooth Adapter 2

Adapter 2PGDAD Paging/Doorphone Adapter 2

1SLTAD Single Line Telephone Adapter 5

Cradle

Bottom

DTL-2E-1 2 Keys Digital Terminal without LCD 0.8

DTL-12D-1 12 Keys Digital Terminal 0.8

DTL-32D-1 32 Keys Digital Terminal (24D-1 with 8LK-L) 0.8

DTL-12BT-1 12 Keys Digital Terminal with Bluetooth Cordless Handset 3

Power Save Adapter Power Failure Transfer Cradle 1.2

BCH-L UNIT Bluetooth Cordless Handset Cradle 2

DTL-6DE-1 6 Keys Digital Terminal 0.8

24 Keys Digital Terminal

DTL-8LD-1 DESI Less Digital Terminal 0.8

DCL-60-1 60 Keys DSS Console 2

Recording Jack Adapter

Analog Terminal Adapter with Ringer

0.8

DTL-24D-1 0.8

ADA-L UNIT 2

APR-L UNIT 2

Total =< 80 points80 points per Chassis



Terminal Power FactorTerminal Power Factor Total =< 80 points80 points per Chassis

Category Item Description Power Factor

ITL-2E-1 2 Keys IP Terminal without LCD 4

ITL-6DE-1 6 Keys IP Terminal 4

ITL-12D-1 12 Keys IP Terminal 4

ITL-24D-1 24 Keys IP Terminal 4

ITL-32D-1 32 Keys IP Terminal (24D-1 with 8LK-L) 4

ITL-8LD-1 DESI Less IP Terminal 4

ITL-12PA-1 12 Keys IP Terminal with Power Failure Adapter 4

ITL-12BT-1 12 Keys IP Terminal with Bluetooth Cordless Handset 6

ITL-320C-1 IP Terminal with Large color touch LCD 6

IP Terminal

Note : Above terminal’s factors are calculated using the CD-ETIA blade.

2Aspire DSS ConsoleIP1WW-110D DSS

0.8Aspire Digital TerminalsIP1WW-DSLTIP1WW-12/24THIP1WW-12/24TXH

Aspire Terminal

3Aspire APR AdapterIP1WW-APR Adapter

Power FactorDescriptionItemCategory


Appendix : Migration from AspireAppendix : Migration from Aspire

Digital Terminal MigrationDigital Terminal Migration

Aspire Terminals including DSS Console can be directly connected to one of DLCA Ports without any special setting and hardware.

DLCA

Aspire Terminals

Aspire Snap-In Options (ADA, APA, APR, CTA)also shall work with Aspire Terminals under SV8100.

System MigrationSystem Migration

There is no hardware migration between Aspire and SV8100, however, SV8100 provides “AspireNet”interface to connect with Aspire system. The user can slowly migrate from Aspire to SV8100.

Note : AspireNet over ISDN is one of standard features on SV8100.(AspireNet over IP is licensed feature)

Note : SV8100 Desktop Terminals can NOT be connected toAspire system.

AspireNetover ISDN

Features & PRG MigrationFeatures & PRG Migration

Basic system features of Aspire system is almost 100% migrated to SV8100 including operations and programming methods.

SV8100 System Outline

Documents

Transcript of SV8100 System Outline