Surface Drainage Product Guide - Armtec: Solutions … DRAINAGE SOLUTIONS | SURFACE DRAINAGE PRODUCT...

–DRAINAGE SOLUTIONS

SINCE 1908

–

EXTREMELY LIGHTWEIGHT

INNOVATIVE DESIGN

DURABLE AND ROBUST

CORROSION AND IMPACT RESISTANT

MAINTENANCE FRIENDLY

Surface DrainageProduct GuideQUICKLY DIVERT EXCESS WATER FLOW AWAY FROM WALKWAYS, ROADS AND BUILDING STRUCTURES

2 | VISIT ARMTEC.COM FOR MORE INFORMATION

Partnered for SuccessArmtec is proud and excited to add the HAURATON line of surface drainage products to our full lineup of Drainage Solutions. HAURATON developed their first trench drain systems in 1956 and since then, their surface drainage systems have become the benchmark for quality and innovation worldwide. Founded in Germany and backed by superior research and engineering, HAURATON products are known for their technical advancements and innovative designs. HAURATON products are unlike any other available in the North American market today.

Water fl owing over large, impermeable surfaces and paved areas needs to be diverted quickly and directed away from walkways, roads, and building structures. Surface drainage removes excess water from these areas. There are two common types of open drainage systems—point and linear drainage.

SURFACE DRAINAGE

WHY CHOOSE LINEAR DRAINAGE SYSTEMS?

Attractive and Functional

IMPROVED SURFACE WATER INTERCEPTIONPonding is reduced or virtually eliminated due to the simple surface grading

ENVIRONMENTAL SAFETY Allows total control of unwanted liquids in an emergency (single isolated outlet vs. multiple point outlets)

AESTHETICSNeat, discreet, linear appearance with a choice of decorative grates

END USER COMFORTSafe and level surface eliminates the “roller coaster” effect associated with point drainage

Cost Effective

REDUCE NUMBER OF SYSTEM COMPONENTS Fewer manholes, catch basins, pipes and accessories

SHALLOW DEPTH OF CONSTRUCTIONReduced excavation and construction time means reduced cost

REDUCED MAINTENANCE COSTSEasy access along the whole length of the linear drainage system via removable grates

Easy to Use

EASE OF INSTALLATIONLightweight materials allow trench drains to be laid out with ease

STORAGE OF SURFACE WATERLinear drainage can utilize its built-in storage capability

EASY LANDSCAPINGTwo gradients instead of multiple diamond shaped low points

Surface water is funneled into the low points of the drainage area through catch basins and led to underground pipes.

Disadvantages• Potential for ponding and blockages• More components required (manholes, pipe works)• Uneven surface• Poor access to the system

POINT DRAINAGE LINEAR DRAINAGE

Water is quickly drained from the surface and flows efficiently within a linear trench drain system towards a single outlet.

Advantages• Improved water interception • Fewer components required• Shallow depth of excavation• Quicker installation• Easy access for maintenance• Attractive design

S O U R C E D E S O L U T I O N S

ARMTEC DRAINAGE SOLUTIONS | SURFACE DRAINAGE PRODUCT GUIDE | 3

RECYFIX® STANDARDA 15 B 125

RECYFIX® PRO B 125

RECYFIX® PLUS C 250

RECYFIX® NCD 400E 600

RECYFIX® HICAP®A 15 toF 900

Armtec offers a wide range of HAURATON linear drainage systems suitable for a variety of applications.

HOW TO SELECT THE RIGHT TRENCH DRAIN

Identify the project application for the drainage system1

Residential Areas, Parks & Gardens1

Commercial Areas, City Centres, Train Stations2

Streets & Roads3

Industrial Areas 4Docks, Ports & Airports5

Determine the required load class2

1 2

1 2

2

3 4

31 2 4 5

A 15 Load Class 15kN

Residential areas used by pedestrians

and cyclists

B 125 Load Class 125kN

Sidewalks, pedestrian areas and residential

parking

C 250 Load Class 250kN

Parking lots and general

commercial areas

D 400 Load Class 400kN

Streets and roads1

E 600Load Class 400kN

Industrial areas used by hard tire forklifts,

heavy vehicles

F 900 Load Class 900kN

Special areas with heavy wheel loads

(e.g. airports)

RECYFIX® STANDARD

Cost effective drainage solutionWide range of grate options

RECYFIX® PRO

Made of PP and PA-GF2 material,

100% corrosion free

RECYFIX® PLUS

Made of PP with ductile iron grate

for more durability

RECYFIX® NC

Highly stable & lightweight Made of PP

Road and highway applicationsLoad class up to E 6003

RECYFIX® HICAP®

Highest load classIntegrated detention

1 Load capacity of D 400 rated grates exceeds AAHSTO HS-20 & HS-25, CHDBC CL-625 & CL-800 load ratings2 PP (polypropylene) and PA-GF (glass-fibre reinforced polyamide)3 RECYFIX® NC (100-300mm) rated to E 600 when installed with the E 600 rated grate and appropriate concrete encasement

Load Class


Perform a hydraulic analysis of the trench drain system Please complete the inquiry data sheet below. Armtec will prepare a hydraulic analysis report based on the data submitted and provide sizing recommendations. For help completing the form or to contact a technical representative, email [email protected].

3

Date

Project Information Project Name

Project Location

Contact Person

Company Name

Company Address

Email

Telephone Number

Sizing Information

1. Catchment area a) Length of the trench drain run (including outflow) m

b) Width of drainage area m

2. Surface runoff coefficient Concrete (1.0) m2

Asphalt (0.9) m2

Pavers (0.8) m2

Gravel (0.6) m2

OR

Mean coefficient

Total area m2

3. Surface gradient in the direction of the trench drain run %

4. Design rainfall intensity mm/h

5. Trench drain intakes (if applicable)

Intake 1 Distance from start: m Flow: l/s




6. Trench drain outflow a) Type of outlet b) Outlet Diameter

Via catch basin mm

Via vertical outlet (channel bottom) mm

Via end cap with outlet (channel end) mm

Via side outlet (channel wall) mm

Free outflow

7. Load class A 15 B 125 C 250

D 400 E 600 F 900

Grate Photo to be supplied

Grate Photo to be supplied


GRATE OPTIONS

Load Class GUGI Ductile Iron Mesh

Ductile Iron

Ductile Iron

Mesh Slotted Perforated GUGI-Meshmade of PA-GF

FIBRETEC Slottedmade of PA-GF

Trench Drain Nominal Width (mm)

RECYFIX® STANDARD

A 15 100, 150, 200 100

B 125 100, 150, 200

RECYFIX® PRO

B 125 100 150, 200

C250 100

RECYFIX® PLUS C250 100, 150,

200, 300100, 150,

200

RECYFIX® NC

D 400 100 150, 200, 300, 400

E 600 100, 150, 200, 300

RECYFIX® HICAP® F

For RECYFIX® HICAP® grate selection, please contact an Armtec representative.RECYFIX® HICAP® G

ADA: Americans with Disabilities Act (width of grate openings does not exceed 13mm)

Whatever the application, there is a RECYFIX trench drain system to meet your drainage requirements. Made of high grade PP (polypropylene), RECYFIX trench drains are extremely durable, lightweight and virtually unbreakable. They are highly chemical resistant and withstand frost, de-icing salt and UV radiation. The torsion resistant rib design ensures stability and secure anchoring to concrete. These pre-assembled, lightweight trench drain units are easy to handle and simple to install with pre-molded lateral and vertical connections, as well as tongue and groove ends to ensure perfect alignment. RECYFIX products are 100% recyclable and certifi ed to the International Standard EN 1433.

RECYFIX® PRODUCTS

Impact resistant

FEATURES & BENEFITS

Durable and robust

Chemical and corrosion resistant

Environmentally friendly

Frost resistant

Innovative design

High quality materials for optimum durability

Extremely lightweight

Versatile design

Variety of grate options

RECYFIX® STANDARDFast and cost-effective water evacuationPAGE 8

RECYFIX® NCExtremely durable and lightweight for heavy-duty applicationsPAGE 14

RECYFIX® PROInnovative corrosion free surface drainage system made entirely of PP and PA-GFPAGE 10

RECYFIX® HICAP®High capacity drainage systemfor the highest load categoryPAGE 16

RECYFIX® PLUSThermoplastic body with steel edge rail and ductile iron gratesPAGE 12

Armtec offers a wide range of HAURATON surface drainage products that are suitable for a variety of applications including commercial, industrial, municipal, transport and residential developments. Their durable PP (polypropylene) and PA-GF (glass fibre-reinforced polyamide)construction make them robust and lightweight compared to units cast from concrete. The neutral invert design of HAURATON trench drains offers comparable hydraulic performance to pre-sloped products, with the added benefit of being interchangeable in the field.


Fast and cost-effective water evacuationWhen you’re looking for fast and cost-effective water drainage, look no further than RECYFIX STANDARD. These systems range in size from 100mm to 200mm and come with a variety of grate options. This low cost solution is perfect for pedestrian traffic and occasional vehicular use. BenefitsSAFETY• Light weight ensures easy handling

on site and reduced risk of injury during installation

• Grates available to accommodate wheelchair use (ADA compliant)

DURABILITY• Stable and robust with torsion

resistant ribs, made of high-grade 100% recycled PP

• Withstands frost, de-icing salt and UV radiation

COST SAVINGS• Economical choice for pedestrian

areas and low intensity traffic• Quick installation means cost savings

in the field• Durable product, with less breakage

and loss during installation

RECYFIX® STANDARD

RECYFIX® STANDARD BLENDS SEAMLESSLY WITH PATIOS & PAVING STONES

PERFECT FOR PUBLIC SPACES, COMBINING AESTHETIC QUALITY WITH FUNCTIONALITY

RECYFIX® STANDARD channels meet the requirements of EN 1433 and are suitable for the following load categories:

Category A 125, Load 15kNResidential areas used by pedestrians and cyclists

Category B 125, Load 125kNSidewalks, pedestrian areas and small parking lots

When in doubt the higher level of load category should be specified

• Parks and gardens • Residential areas• Commercial areas• City centres• Train stations

IDEAL APPLICATIONS


1

2

3

4

4

5

DETAILED VIEW – WITH GRATE AND CATCH BASIN

For technical measurements and specific parts, see page 20.

1 Trench drain made of PP with tongue and groove connection for ease of installation

2 Widest range of grate options available

3 Modular catch basin with integrated pipe connections

4 End cap and end cap outlet

5 Locking bar mechanism to secure the grate

EN 1433

BOSS HDPE adapters are available to connectHDPE pipes to trench drain units


RECYFIX® PROInnovative corrosion free surface drainage system made entirely of PP and PA-GFThis innovative surface drainage made of PP (polypropylene) and PA-GF (glass fibre-reinforced polyamide) is an excellent choice for both public and private areas. With its integrated PP angle housing, and thermoplastic construction, RECYFIX PRO is highly chemical resistant It is 100% corrosion free and will withstand the damaging effects of de-icing salt and frost, looking good for years to come. The FIBRETEC slotted grate option increases the load class in the 100mm size to C250, making it suitable for higher usage areas.

BenefitsSAFETY• Light weight ensures easy handling


• Grates available to accommodate wheelchair use (ADA compliant)

DURABILITY• 100% corrosion free – withstands

frost and de-icing salt • Channel made of high-grade PP• Grates made of high quality PA-GF• 5mm thick integrated PP angle

housing

COST SAVINGS• Quick installation means cost savings

in the field• Durable product – less breakage and

loss during installation

RECYFIX® PRO INTEGRATES SEAMLESSLY INTO EXISTING LANDSCAPING

IS AN INNOVATIVE PRODUCT WITHHIGH CHEMICAL RESISTANCE

RECYFIX® PRO channels meet the requirements of EN 1433 and are suitable for the following load category:

Category B 125, Load 125kNSidewalks, pedestrian areas and residential parking

When in doubt the higher level of load category should be specifi ed

100%Corrosion Free

• Parks and gardens • Residential areas• Commercial areas• City centres• Train stations

IDEAL APPLICATIONS

A HAURATON INNOVATION!



1 Trench drain with integrated PP angle housing

2 Grates made of high quality PA-GF (polyamide) – 100% corrosion free

3 Modular catch-basin with integrated pipe connections



EN 1433

1

2

3

4

4


5


• High density residential areas

• City centres• Commercial areas• Gas stations

IDEAL APPLICATIONS


RECYFIX® PLUSThermoplastic body with steel edge rail and ductile iron gratesRECYFIX PLUS provides easy and efficient drainage for higher intensity applications. This durable trench drain with torsion resistant ribs and steel angle housing is available in sizes from 100mm to 300mm. The GUGI ductile iron mesh grate increases the load class to C 250 in the 300mm option. BenefitsSAFETY• Light weight ensures easy handling


• Withstands stresses of braking forces• Grates available to accommodate

wheelchair use (ADA compliant) DURABILITY• Robust with torsion resistant ribs • Durable galvanized steel angle

housing• Withstands frost, de-icing salt and UV

radiation

COST SAVINGS• Quick installation means cost savings

in the field• Durable product – less breakage and

loss during installation• Withstands frost, de-icing salt and UV

radiation

RECYFIX® PLUS channels meet the requirements of EN 1433 and are suitable for the following load category:

Category C 250, Load 250kNParking lots and general commercial areas or similar applications


RECYFIX® PLUS EASILY INTEGRATES INTO EXISTING LANDSCAPING

STRENGTH AND DURABILITY FOR PUBLIC SPACES



1 Trench drain made of PP with galvanized steel angle housing

2 Durable ductile iron grate




EN 1433

1

2

3

4

4


5


• City centres• Industrial areas• Commercial areas• Streets & roads• Parking lots• Office areas• Storage yards

IDEAL APPLICATIONS


RECYFIX® NCExtremely stable and light weight for heavy-duty applicationsThis new product from HAURATON is the first channel made entirely of PP (polypropylene) with a nominal width up to 400mm. The increased cross-sectional area improves drainage through the trench drain, providing excellent hydraulic performance. The durable PP material resists breakage and withstands frost and salt. RECYFIX NC is extremely lightweight, allowing for easy handling and installation compared to similar concrete products. Its strength and wider size were specifically designed to meet the heavy duty demands of civil works projects.

RECYFIX NC (100mm to 300mm) is now rated to E 600 (600kN) when installed with the proper concrete encasement.

BenefitsSAFETY• Light weight ensures easy handling


• Grates are securely locked in place by 8 bolts per metre of trench drain

DURABILITY• Designed for high intensity traffic

loads and withstands breaking and gripping forces

• Withstands frost, de-icing salt and UV radiation

COST SAVINGS• Quick installation means costs

savings in the field • Impact resistant product – less

breakage and loss during installation

ADVANCED DESIGN• Larger cross-sectional area of trench

drain ensures efficient water evacuation

• Angle housing ridges stop lateral movement during high intensity usage

RECYFIX® NC BLENDS SEAMLESSLY INTO EXISTING LANDSCAPING WITH ITS CONCRETE CASING

EFFECTIVE WATER EVACUATION FOR ROAD APPLICATIONS

THE FIRST TRENCH DRAIN BODY MADE ENTIRELY OF PP WITH A NOMINAL WIDTH OF 400MM

RECYFIX® NC trench drains meet the requirements of EN 1433 and are suitable for the following load categories:

Category D 400, Load 400kNStreets & roads

Category E 600, Load 600kN*Industrial areas used by hard tire forklifts, heavy vehicles

When in doubt the higher level of load category should be specifi ed

* RECYFIX NC 100 to 300 mm

NEW!

HAURATON

EXCLUSIVE



1 Trench drain made of PP with integrated angle housing, with groove and tongue connection for exact installation

2 Durable ductile iron grate



5 8 Bolts per metre

EN 1433

1

23

4

4

5



• Airports• Industrial areas• Container terminals• Port facilities• Service stations

IDEAL APPLICATIONS


RECYFIX® HICAP® F & HICAP® GRECYFIX HICAP is the drainage solution of choice for challenging design conditions where high loads and hydraulic performance are critical. Drainage and detention are achieved through a single component and can be optimized with a large selection of nominal widths up to 680mm. Rated to F 900 (900kN), it is strong and durable but at the same time light and virtually unbreakable. Its unique design features create a uniform visual appearance even in large scale projects. Installed with a concrete casing surround, RECYFIX HICAP creates a drainage system unparalleled in strength and hydraulic performance. BenefitsSAFETY• Light weight ensures easy handling


DURABILITY• Extremely durable even under the

highest loading conditions• Withstands frost, de-icing salt and UV

radiation

COST SAVINGS• Quick installation means costs

savings in the field • Durable product – less breakage and

loss during installation

ADVANCED DESIGN• Excellent hydraulic performance and

large detention volume • Integrated grate design

RECYFIX® HICAP® BLENDS DISCREETLY INTO DRAINAGE AREAS

PERFECT FOR AIRPORT RUNWAY APPLICATION AND EXTREMELY LARGE, LEVEL IMPERVIOUS AREAS

HEAVY-DUTY TRENCH DRAIN WITHDETENTION CAPABILITIES

RECYFIX® HICAP® trench drains meet the requirements of EN 1433 and are suitable for the following load categories:

Category A 15, Load 15kN Residential areas used by pedestrians and cyclists

Category B 125, Load 125kN Sidewalks, pedestrian areas and residential parking

Category C 250, Load 250kN Parking lots and general commercial areas or similar applications

Category D 400, Load 400kN Streets & roads

Category E 600, Load 600kN Industrial areas used by hard tire forklifts, heavy vehicles

Category F 900, Load 900kN Special areas with heavy wheel loads (e.g. airports)



SECTION TYPE AND DETENTION VOLUMES

Overall Height (Type)mm

Type265

Type365

Type380

Type465

Type750

Type860

Nominal Widthmm 100 100 150 200 300 680

Volume (liters per metre)

18.41 28.41 46.01 79.01 171.41 443.01


DETAILED VIEW – HICAP® SYSTEM WITH A STEPPED-FALL LAYOUT

1 RECYFIX HICAP trench drain with a nominal width of 100mm in PP with inlet adapter and integrated ductile iron grate


2 The connector is used to connect to the next nominal size up

4 T-connector for connecting to branches


1 2

38

4

5



8 End cap with a nominal width of 100mm


9 End cap with a nominal width of 680mm with outlet connection option

10 Catch basin with galvanized angle housing and a boltless locking system. Can be used to step from smaller to larger sections along the length of the trench drain run.

6

7

9

10

For technical measurements and specific parts, please contact an Armtec representative at 1-877-5-ARMTEC or email [email protected]


TECHNICAL MEASUREMENTS

RECYFIX® STANDARD

Nominal Width(mm)

Model Grates

100mm 60

80

01

010

150mm 100

01

200mm 100

010

020

Class A 15

Class B 125


RECYFIX® PRO

Nominal Width(mm)

Model Grates

100mm 75

95

01

010

150mm 115

01

200mm 115

010

Class B 125

Class C 250


RECYFIX® PLUS

Nominal Width(mm)

Model Grates

100mm 60

80

01

010

150mm 100

01

200mm 100

010

20

300mm 01

Class C 250


RECYFIX® NC

Nominal Width(mm)

Model Grates

100mm 75

01

010

020

150mm 01

200mm 010

300mm 010

400mm 010

Class D 400

Class E 600


INSTALLATION GUIDEGeneral Notes Technical and installation information provided below are for guidance only. The contractor has the responsibility to determine the installation procedure and sequence on site. Armtec will provide a project-specific installation drawing. The Engineer of record has the responsibility to design, check and approve the foundation, expansion joints, steel reinforcement detail and other aspects regarding the installation of trench drains and associated structures.

The information below provides a basic overview regarding system installation. A more detailed installation guide is available on request. Please also refer to the animated installation videos available.

Transport & Unloading The trench drains are generally supplied to site as one-metre fully assembled units (grate fixed to the channel). The material is delivered on pallets banded and wrapped. Unloading should be carried out by fork-lift or other mechanical handling equipment available on site.

Handling & Storage We would advise that common sense is used when lifting and moving items, to avoid injury and damage. To avoid site damage, trench drain units and other accessories should not be dragged, thrown or dropped. Light-weight trench drains can be carried around site and positioned within the trench by hand. Mechanical handling equipment may be required for moving larger units. If lifting slings are used, these should be placed around the complete unit at a position that ensures the unit is levelled, to avoid any sliding action.

Trench drains, modular catch basins and accessories shall be stored upright on level, solid ground in a clean, dry and safe location to avoid damage on site. If units are to remain for a prolonged period on site, we advise they are stored in a sheltered location. Banded packs shall be stored one pallet high with nothing stacked on top.


Installation Preparation There are several methods that can be used to install a trench drain system, such as the ‘bedding method’ and the ‘top hung’ (hanging) method. The most common is usually the ‘bedding method’ which will be described briefly in this document. Before starting the installation, the contractor shall have in hand the correct Installation Drawing according to the model and size of the trench drain, the loading requirement and the surface finish.

Excavation Dig a trench with sufficient width and depth to ensure the minimum concrete encasement according to the Installation Drawing. Ensure the foundation is well compacted and that all unsuitable material is replaced by good fill material approved by the Engineer of record. Trench base shall have the same slope of the finish grade.

Pipe and channel connections Set the outlet for connecting the modular catch basin or last unit of the trench drain to the underground drainage pipe. Cut required holes in trench drain units, modular catch basins and other accessories for pipe connections. Depending on the configuration (including junctions, tees, etc), trench drain units may require trimming, cutting or removal of pre-formed knock-out sections to assist with connection between trench drains.

Pouring and foundation Depending on the installation method, trench drain system selected, load application and surface finish to be installed, it may be necessary to erect a form-work structure. Pour a semi-dry concrete levelling course on the compacted foundation and bed. Refer to the appropriate Installation Drawing for details relating to concrete specification and consistency.

Laying trench drain units All installations should start from the outlet position, laying units upstream. Place trench drain units onto the concrete bed and join them using the male-female (tongue and groove) joint design within the trench drain unit. Ensure the arrow marked on the channel body is pointing in the direction of flow. Install associated accessories (end caps, access boxes, etc.) where required.

Pouring concrete encasement Before installing the concrete haunch and surround, please ensure that grates are securely placed within trench drain units to prevent the deformation of these units by lateral pressure during the installation procedure. Timber bracing can also be placed within units. It is also recommended to fix a suitable strong construction tape to the top of grates to protect these from concrete contamination. Protective tape can be removed at the end of the installation procedure. Concrete should be placed evenly on both sides to avoid displacement of the trench drain. A concrete vibrator rod should be used to distribute the concrete uniformly around the channel.

Pavement finishingInstall the adjacent surface finish according to the Installation Drawing. Ensure finish grade of adjacent surfaces are permanently 3 to 5 mm higher than the top edge of the trench drain. When installing trench drain units within concrete pavements (slabs), where the concrete encasement around the trench drain extends to the top surface, it may be necessary to install longitudinal and transverse expansion joints to accommodate for lateral expansion of adjacent pavements. Crack control (shrinkage) joints may also be required within the top surface of the concrete encasement around the trench drain.

Final Inspection & Maintenance

• Grates may need to be removed to access the trench drain.• Flush trench drain run to check for pipe work blockages and unblock if necessary.• Make sure there is no debris left within the trench drain and ensure outlet pipes are clear.• Remove any debris from trash bucket within catch basins.• Replace the grates within the trench drain system. Ensure all the grates are securely fixed.• A more detailed operations and maintenance guide is available on request.


RECYFIX® GENERIC SPECIFICATION

This specification covers HAURATON RECYFIX® STANDARD / PRO / PLUS / NC* modular surface drainage system as supplied by ARMTEC.

All components and accessories within the scope of this system shall be obtained from the same manufacturer.

2.1 Trench Drain Body

2.2 Grates

A. The trench drain shall be tested for water-tightness and load-tested to A15kN / B125kN / C250kN / D400kN / E600kN* in accordance with the international standard EN 1433:2002.

3.1 Connection to the underground pipe network shall be via a modular catch basin / horizontal end cap outlet / vertical outlet / connection to a concrete manhole*.

3.2 The system shall be installed in compliance with manufacturer’s guidelines, and the work carried out as specified by the project engineer and in accordance with recognised good practice.

*Please select appropriate option

A. Grate type shall be Perforated / Slotted / Longitudinal Slotted / Mesh* design in Galvanised Steel / Ductile Iron GJS 500-7 / Glass-Fibre Polyamide (PA-GF)*, tested to load class A15kN / B125kN / C250kN / D400kN / E600kN* according to EN 1433:2002.

B. Grates shall be 500 mm long with mm* openings.

C. The grates shall be secured to channel edge-frame using a central locking bolt (one for each 500mm grating) / eight M8x30 bolts per meter length*.

B. The trench drain body shall be formed from high-grade polypropylene (PP) for strength, durability and superior chemical/corrosion resistance. PP compound material shall include 2% or more carbon black for enhanced UV stability and resistance.

C. Trench drain units shall be constant depth and supplied in 1.0m lengths; with a clear opening width of 100mm / 150mm / 200mm / 300mm / 400mm*. The trench drain shall have a ‘U-Shaped‘ profile for efficient hydraulics and self-cleaning properties.

D. The trench drain body shall incorporate ribbing and concrete anchors for added structural integrity, with pre-formed sections for flexible connection to underground pipe-work and services.

E. The trench drain body shall include an integral polypropylene edge for structural rigidity, durability, corrosion resistance and aesthetics.

F. Trench drain units shall incorporate male-female end profiles for simple and precise connection.

General1

Materials2

Installation3


COMMERCIAL AREAS

HIGH TRAFFIC AREAS

CITY CENTRE

AESTHETICALLY PLEASING

PARKS & GARDENS

PUBLIC SPACES

SHOPPING CENTRES

VERSATILE

DURABLE

ATTRACTIVE DESIGN

INDUSTRIAL AREAS

HIGH LOAD CAPACITY

–Armtec is a leading Canadian infrastructure and construction materials company combining creative engineered solutions, relevant advice, dedicated people, proven products and a national presence with a local focus on exceptional customer service.

1-877-5-ARMTEC | ARMTEC.COM

–Drawings and product details are for information and/or illustrative purposes only, and may vary. Please contact your local Armtec representative for the most current product information.

–DRAINAGE SOLUTIONS / SURFACE DRAINAGE PRODUCT GUIDE | 2016-04PROD-C02-G15-PG-2016-04

Surface Drainage Product Guide - Armtec: Solutions … DRAINAGE SOLUTIONS | SURFACE DRAINAGE PRODUCT...

Documents

Transcript of Surface Drainage Product Guide - Armtec: Solutions … DRAINAGE SOLUTIONS | SURFACE DRAINAGE PRODUCT...