Superslim - RMD Kwikform€¦ · as raking push-pull props, as well as vertical shoring. Ideal as...
Transcript of Superslim - RMD Kwikform€¦ · as raking push-pull props, as well as vertical shoring. Ideal as...
RMD Kwikform South AfricaSuperslim
PRODUCT BROCHURE
Product OverviewThe Superslim soldier is the definitive formwork primary beam. Robust and easily assembled into beams of almost any length, the Superslim soldier can be used in numerous temporary works applications.
FasterStandard fixtures and clamps ensure optimum on site efficiency.
Formwork ties and other components can be fixed almost anywhere along the Superslim Soldier's length allowing for best on site productivity and optimum scheme design.
Robust to cope with the demands of frequent reuse providing easy assembly and consistency for optimum fabrication on site.
SaferManufactured from high yield steel to provide maximum load capacity.
Proven performance time after time.
EasierCompatible with all other RMD Kwikform product ranges making it extremely versatile.
Huge range of standard accessories provide the versatility to tackle an almost limitless range of applications.
Superslim The definitive formwork primary beamPRODUCT BROCHURE
1
ApplicationsAvailable in nine lengths, and with a comprehensive range of accessories, the Superslim Soldier can be assembled into:
Wall formwork panels of virtually any shape or size
Bridge cantilever edge and deck supports
Composite bridge deck formwork
Travelling gantries
Vertical and raking shores
Spanning beams and trusses
Support structures for temporary site buildings
Façade retention / space frames
Superslim The definitive formwork primary beamPRODUCT BROCHURE
2
Features & BenefitsThe Superslim Soldier has unrivalled strength-to-weight ratio, versatility and range of accessories and can be re-used on site after site, in numerous temporary works applications.
Any length of beamNine standard lengths, from 10mm to 3600mm, give almost unlimited scope for assembling beams of virtually any length.
VersatileVersatlity to tackle diverse applications demanded by major projects - gantries, shoring, spanning trusses and frames, as well as formwork panels.
CompatibleFully compatible with other RMD Kwikform product ranges and, in many cases, with customers’ own equipment.
Freedom to createComplete freedom to create the optimum design, whatever the application.
Precisely manufacturedCombines maximum durability and load capacity with reduced unit weight.
RobustEasy assembly and consistently accurate fabrication on-site.
Superslim The definitive formwork primary beamPRODUCT BROCHURE
3
In DetailCan be assembled into practically any lengthBecause they can be assembled into practically any length, Superslim soldiers are frequently used as raking push-pull props, as well as vertical shoring.
Ideal as primary beamsSuperslim soldiers are ideal as primary beams on shoring or scaffolding to support reinforced concrete slab construction.
Can be assembled with ease into frames and trussesUsing system clamps, scaffold tube and other accessories, Superslim soldiers can be assembled with ease into frames and trusses for façade retentions, multi-level supports to temporary site offices, cantilever supports, exhibition stands and film sets.
Construct straight, curved, conical or other formwork configurationsWhen using a plywood form face together with one of RMD Kwikform’s Aluminium secondary beams or timber beams, Superslim soldiers can be used to construct straight, curved, conical or other complex formwork configurations: RMD Kwikform supplies brackets for attaching access walkways on formwork panels.
Superslim The definitive formwork primary beamPRODUCT BROCHURE
4
ProjectsPROJECTThird Millenium Bridge
REGIONEurope
STRUCTURESBridges, Roads
PROJECTBirmingham New Street Station
REGIONEurope
STRUCTURESRail
PROJECTJebel Ali Sewage Treatment Plant
REGIONMENA
STRUCTURESIndustrial
PROJECTPhosphate Hangar
REGIONAfrica
STRUCTURESIndustrial, Mining
PROJECTA34 Wolvercote Viaduct Replacement
REGIONEurope
STRUCTURESBridges
PROJECTAberdeen's Marischal College Conversion
REGIONEurope
STRUCTURESRepair Maintenance and Improvement
Superslim The definitive formwork primary beamPRODUCT BROCHURE
5
Components
Code Description Weight
SSX13600 Superslim Soldier 3600mm 72.2kg
SSX12700 Superslim Soldier 2700mm 55.4kg
SSX11800 Superslim Soldier 1800mm 38.8kg
SSX10900 Superslim Soldier 900mm 22.0kg
SSX10720 Superslim Soldier 720mm 18.7kg
SSX10540 Superslim Soldier 540mm 15.2kg
SSX10360 Superslim Soldier 360mm 11.9kg
SSU10035 Superslim Soldier - 360mm O/E 11.7kg
SSX10090 Superslim Soldier 90mm 7.3kg
SSX10040 Superslim End Plate 10mm 2.9kg
Superslim Soldier Beams
AWL = 20kNm bending / 150kN tension
Code Description Weight
SSU10010 Superslim Joint Stiffener 1.4kg
BNU16013 M16x110 Bolt Gr8.8 BZP 0.2kg
BNU16001 M16 Nut gr8 BZP 0.03kg
Joint Stiffener
AWL = 30kN / pair
Code Description Weight
SSU10032 Superslim Lifting Plate 15kN 3.2kg
SSX10046 Superslim 19mm Pin & R Clip 0.3kg
Lifting Plate
AWL on the bracket = 3.2kN UDL
Code Description Weight
SSU10031 Superslim Access Bracket 6.7kg
Access Bracket
Code Description Weight
SSU10016 Superslim Turnbuckle 914-1160 8.4kg
SSU10033 Superslim Plumbing Foot 11.5kg
SSX10046 Superslim 19mm Pin & R Clip 0.3kg
Turnbuckle and Plumbing Foot
Superslim The definitive formwork primary beamPRODUCT BROCHURE
6
Components
AWL = 10kN
Code Description Weight
SSX10042 Superslim Form Support Plate 5.3kg
BNU16007 M16x40 Set Pin gr8.8 BZP 0.09kg
BNU16001 M16 Nut gr8.8 BZP 0.03kg
Support Plate
Connects Soldiers to timber waling
Code Description Weight
BNU10054 Bolt - Metric Waling 117x117 0.3kg
BNU10055 Bolt - Metric Waling 176x127 0.4kg
SSU10017 Waling Clamp Plate 0.4kg
BNX20014 Washer - Plate 50x50x6x18mm 0.1kg
BNU16001 M16 Nut gr.8.8 BZP 0.03kg
Timber Waling Clamp Assembly
AWL = 3.25 kN / pair
Code Description Weight
RPX10005 "B" Clamp 0.7kg
B Clamp
Connects scaffold tube to the soldier (does not project above the tube surface)
Code Description Weight
BNX16007 M16x220 Bolt gr8.8 BZP 0.4kg
BNX20020 Washer - Channel 150x75x18mm 0.7kg
RPX10008 'G' Clamp - Tube Type M16 0.6kg
'G' Clamp
AWL = 6.25kN in slip / each
Code Description Weight
SSU10024 Slimshor Tube Clamp 1.3kg
Slimshor Tube Clamp
Superslim The definitive formwork primary beamPRODUCT BROCHURE
7
Components
Code Description Weight
SFX10018 Half Coupler 0.5kg
BNU16008 M16x40 Set Pin gr8.8 C/Snk HTZP 0.05kg
BNU16001 M16 Nut gr8.8 BZP 0.03kg
Half Coupler
Code Description Weight
SSU10017 Superslim Waling Clamp Plate 0.4kg
BNU16002 M16 Round Washer BZP 0.1kg
BNU16013 M16x110 Bolt gr8.8 BZP 0.2kg
BNU16001 M16 Nut gr8.8 BZP 0.03kg
Waling Clamp Plate
Code Description Weight
ALX10001 Universal Clamp 0.7kg
Universal Clamp
Code Description Weight
AFX20015 Clamp - Superslim 0.14kg
AFX20022 Bolt M12 Uni-fix 0.05kg
BNU12001 M12 Nut gr8.8 BZP 0.01kg
AFX20012 Clamp Assembly - Superslim 0.2kg
Alform Superslim Clamp
Code Description Weight
ALX10002 Flange to Flange Wedge Clamp 0.5kg
Flange to Flange Wedge Clamp
Code Description Weight
ASX10056 Alshor Superslim Clamp 0.7kg
Alshor Superslim Clamp
Superslim The definitive formwork primary beamPRODUCT BROCHURE
8
Components
Code Description Weight
BTX10014 Waler Plate - Light 55kN 1.1kg
BTX10021 Waler Plate - Standard 70kN 1.4kg
BTX10004 Waler Plate - Heavy Duty 90kN 1.8kg
15mm Rapid Tie Waler Plates
Code Description Weight
HTU10014 Waler Plate - Angle 3/4" 70kN 1.3kg
15mm Rapid Tie Angle Waler Plates
Code Description Weight
BTX10029 Waler Plate - Hi Load 160kN 6.8kg
20mm Rapid Tie Waler Plates
Code Description Weight
SSX10039 Porthole Bearing 65kN 2.0kg
Porthole Bearing
Spreads and transfers loads from Superslim props where length adjustment is necessary - AWL=150kN (100kN when load is released via the jack handle).
Code Description Weight
SFU10025 Superslim Adjustable Base 365-515mm 19.0kg
Adjustable Base
Supports header beams where length adjustment is required - Adjustable range 440-590mm - AWL= 150kN ( 100kNwhere length adjustment is required)
Code Description Weight
SSU10026 Superslim Adjustable Head 440-590mm
24.6kg
AFX20003 Clamp Plate 0.1kg
BNX12009 M12x25 Set Pin gr8.8 BZP 0.04kg
BNC12002 M12x30 Set Pin gr8.8 BZP 0.04kg
Adjustable Rocking Head
Superslim The definitive formwork primary beamPRODUCT BROCHURE
9
Components
Maximum angle of tilt = 28 degrees, AWL=150kN
Code Description Weight
SSU10023 Superslim Rocking Head 36mm 4.3kg
BNX10005 M10x20 Set Pin Gr 8.8 BZP 0.02kg
SSU10029 Rocking Head Washer - M10 Galv 0.02kg
Rocking Head
Code Description Weight
SSX10041 Superslim Prop Support Plate 6.3kg
BNX20027 M20x45 Set Pin gr8.8 BZP Csk 0.2kg
BNU20001 M20 Hex Nut gr8 0.06kg
Superslim Prop Support Plate
AWL = 65kN / Pivot
Code Description Weight
SSU10019 Superslim Corner Pivot 7.3kg
Corner Pivot
Connects a heavy duty push-pull prop to the porthole of another soldier - AWL = 65 kN
Code Description Weight
SSU10012 Spade End Link - Prop 3.1kg
SSU10004 Superslim Prop Pivot Tube 1.8kg
Prop Spade End Link & Prop Pivot Tube
AWL = 100kN
Code Description Weight
SSU10038 Superslim Prop Connector 100kN 6.8kg
100Kn Prop Connector
Connects heavy duty push-pull props to Megashor - AWL = 100kN
Code Description Weight
SSU10013 Superslim Prop Tube End Link 2.9kg
SSX10051 Superslim Short Prop Tube End Link 1.8kg
Prop Tube End Links
Superslim The definitive formwork primary beamPRODUCT BROCHURE
10
Components
Converts soldiers into heavy duty push-pull props - Adj Range = 405-635mm / AWL = 100 kN
Code Description Weight
SSU10007 Superslim Prop Jack (LH) 14.5kg
SSU10008 Superslim Prop Jack (RH) 14.5kg
Prop Jacks LH and RH
Connects heavy duty push-pull props to a surface - AWL = 100 kN
Code Description Weight
SSU10034 Superslim Tilt Plate 4.8kg
BNU24001 Nut - Hexagon M24 0.06kg
BNX24002 M24x110 Bolt gr8.8 BZP 0.5kg
Tilt Plate
Used in horizontal & vertical plumbing & levelling applications. Range 115mm closed to 400mm fully open.
Code Description Weight
SSX90043 Superslim Universal Soldier Jack 5.6kg
Universal Soldier Jack
Code Description Weight
SSU10003 Superslim 90 Degree Corner 8.7kg
SSU10005 Superslim 45 Degree Corner 8.0kg
Corner Angles
Range = 55 degrees min, 220 degrees max
Code Description Weight
SSU10028 Superslim Pivot Cleat set 8.8kg
Pivot Cleat Set
Code Description Weight
SSX10037 Superslim Pivot Corner 20mm 4.1kg
Pivot Corner
Superslim The definitive formwork primary beamPRODUCT BROCHURE
11
Components
A node to connect six soldiers at right-angles
Code Description Weight
SSU20006 6-Way connector 25.0kg
6-Way connector
Code Description Weight
SSU20066 6 Way Double Connector 37.7kg
6-Way Double Connector
Secures the end of a soldier to a floor or wall - AWL: = 70 kN Tension / 90 kN Shear
Code Description Weight
SSU10036 Anchor Plate 7.40kg
Anchor Plate
Code Description Weight
SSX10048 Superslim Safety Latch 1.6kg
Safety Latch
Code Description Weight
SSU10037 Superslim Klik Klak Latch 3.9kg
Klik Klak Latch
Code Description Weight
SSU10044 Klik-Klak Wall Pocket 1.7kg
BNU20016 M20x130 Bolt gr8.8 BZP 0.4kg
BNU20003 M20 Round Washer BZP 0.03kg
Klik Klak Wall Pocket
Superslim The definitive formwork primary beamPRODUCT BROCHURE
12
Components
Used to attach and spread chains in lifting applications - AWL = 45kN per unit. AWL of Spreader Beam = 90kN (see technical data sheets)
Code Description Weight
SSX10052 Spreader Beam Adaptor Assembly 9.4kg
Spreader Beam Adaptor
Code Description Weight
SSM00007 Fixed Strut Adaptor 16.0kg
SSM00008 Fixed Strut 2896mm 39.0kg
Fixed Strut & Adaptor
Code Description Weight
SSM10540 Single Sided Beam 540mm 16.0kg
Single Sided Beam
Code Description Weight
SSM00001 Single Sided Corner 540 x 540mm 30.0kg
Single Sided Corner
Code Description Weight
BNU16007 M16x40 Set Pin gr8.8 BZP 0.09kg
BNU16013 M16x110 Bolt gr8.8 BZP 0.2kg
BNU16008 M16x40 Set Pin gr8.8 BZP Csk 0.05kg
BNU16001 M16 Nut gr8.8 BZP 0.03kg
BNU20001 M20 Nut gr8 0.06kg
BNU24001 M24 Nut gr8 0.08kg
BNX20030 M20x90 gr8.8 BZP 0.28kg
BNX24001 M24x45 Set Pin gr8.8 BZP 0.26kg
BNX24002 M24x110 Bolt gr8.8 BZP 0.48kg
SSX10046 Superslim 19mm Pin and R Clip 0.29kg
Bolts, Nuts and Pins
Superslim The definitive formwork primary beamPRODUCT BROCHURE
13
ServicesOur service sets us apart...
With over 85 years of experience in the temporary works industry we understand the many and varied challenges that our customers face, whatever the size of your project. Whilst our product range provides us with the capability of supporting your project, it is our people that will make the difference.
Sales SupportOur sales team comprises a vast wealth of experience in the sector, helping us to understand your challenges and the opportunities to save you time and money.
Engineered DrawingsYou will be provided with technical recommendations and layout drawings showing a level of detail sufficient to enable straight forward on-site erection. For specifically fabricated items comprehensive operating instructions will be provided.
Customer ServiceWe work with customers on all scale of projects and as such recognise that your requirements are all different. We provide a level of customer service to suit your requirements ranging from on site training to simple reordering of replacement parts.
Technical ExpertiseEvery project, large or small, requires unique system design. Our highly skilled team of engineers and technical experts will understand first your requirements, and provide a solution designed to exceed these. We do this through approaching projects with an open mind and a desire to provide the most appropriate solution.
SafetyRMD Kwikform prides itself on the inherent safety of our products and the solutions that we design. The construction industry's greatest asset is its people and we design schemes and solutions with this in mind at all times.
Superslim The definitive formwork primary beamPRODUCT BROCHURE
ContactsRMD KWIKFORM SOUTH AFRICAHEAD OFFICE52 Jakaranda St, Plot 22, Hennospark Centurion 0046Tel: +27 12 004 1000Email: [email protected]
BLOEMFONTEIN51 Sand du Plessis Avenue, Eastoire, Bloemfontein, 9323 SATel: +27 51 406 3220Email: [email protected]
CAPE TOWN28 Chardonnay Street, Saxonburg Park, Kuils River, 75580, Cape TownTel: +27 21 300 1400Email: [email protected]
CENTURION52 Jakaranda St, Plot 22, Hennospark Centurion 0046Tel: +27 12 681 0360Email: [email protected]
DURBANUnit 1, Greystone off Ramp, 135 Old North Road, Glen Anil, DurbanTel: +27 31 569 9060Email: [email protected]
JOHANNESBURGEl Ridge Business Park, Cnr Elizabeth & Ridge Road, BoksburgTel: +27 11 568 1080Email: [email protected]
NELSPRUIT11 Wilken Street, Rocky Drift, Nelspruit, MpumalangaTel: +27 13 758 9440/1Fax: +27 13 758 9450Email: [email protected]
WORLDWIDE CONTACTSRMD KWIKFORM UNITED KINGDOMTel: +44 1922 743743Email: [email protected]
RMD AUSTRALIATel: +61 (08) 8179 8200Fax: +61 (08) 8179 8201Email: [email protected]
RMD NEW ZEALANDTel: Tel: 9 259 0353Fax: Fax: 9 276 6732Email: [email protected]
RMD KWIKFORM HONG KONGTel: +852 2415 4882Fax: +852 2745 0232Email: [email protected]
RMD KWIKFORM SINGAPORETel: +65 6863 4252Fax: +65 6863 4275Email: [email protected]
RMD KWIKFORM PHILIPPINESTel: +632 696 7635Fax: +632 661 6456Email: [email protected]
RMD KWIKFORM UAETel: +971 6 553 4173Fax: +971 6 553 4327Email: [email protected]
RMD KWIKFORM QATARTel: +974 4465 3034Fax: +974 4465 3282Email: [email protected]
RMD KWIKFORM BAHRAINTel: +973 1738 2724Fax: +973 1738 2624Email: [email protected]
RMD KWIKFORM OMANTel: +968 2413 7828Fax: +968 2413 7998Email: [email protected]
RMD KWIKFORM SAUDI ARABIATel: +966 13 896 8665Fax: +966 13 896 8664Email: [email protected]
RMD KWIKFORM INDIATel: +91 44 6693 3300Email: [email protected]
RMD CHILETel: +56227149800Email: [email protected]
RMD KWIKFORM USATel: +1 303 252 7000Fax: +1 303 252 7319Email: [email protected]
RMD KWIKFORM IRELANDTel: +353 (0)1 830 2500Fax: +353 (0)1 830 2741Email: [email protected]
RMD KWIKFORM ESPAÑATel: +34 91 555 6104Fax: +34 91 555 4745Email: [email protected]
RMD KWIKFORM DBMETel: +971 6 553 4173Fax: +971 6 553 4327Email: [email protected]
RMD KWIKFORM PANAMATel: +507 280.0869Email: [email protected]
RMD KWIKFORM COLOMBIATel: +57 321 214 71 18Email: [email protected]
Superslim The definitive formwork primary beamPRODUCT BROCHURE
www.rmdkwikform.comOur policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, design, capacity, weight, dimension or code without prior notice being given.
The arrangements of equipment shown in photographs may have been assembled by others and therefore not reflect current best working practices or legislation requirements.
An Interserve Company