Subject to technical changes. Further options …...Cabs Cab elevation K15 K17 B16 Diesel-hydraulic...
Transcript of Subject to technical changes. Further options …...Cabs Cab elevation K15 K17 B16 Diesel-hydraulic...
Mobile material handling machine
14 - 17 m
38 - 43.5 t
164 kW (Stage IIIa)
168 kW (Stage V)
132 kW (Electro)
164 1 kW (Stage IIIa)
1681 kW (S V)
Stage V
2
Advanced. The E-Series
More than 65 years of experience in designing and constructing hydraulic material handling machines
Uncompromisingly high performance in all areas: Focus on material handling
Technology that can be mastered: High- quality components without over-engineering
Long product service life and high value retention
What makes up the E-Series
1962: rope-driven S833 with elevated operator cab
Your top benefits
Safe entry and exit - no-slip stepsState-of-the-art camera - entire work area in view
Maximum safety
Comfortable Maxcab operator cab - relaxed workSENCON - work program selection made easy
Maximum usability
Durable mechanical systems - stressed parts optimizedHigh speeds - high load capacities
Peak performance
Safe fuel - reduce operating costsWork quietly - protect operator and environment
Green Efficiency
3 production sites - 2 subsidiariesmore than 150 sales partners - worldwide and also in your area
Consultation and support in your area
SENNEBOGEN Control System SENCON - easy diagnosisEasy Maintenance - clear labeling
Maintenance and service made easy
1
2
3
4
5
6
3Subject to technical changes. Further options available upon request.
4
The E-Series. At a glance.
Up to 20% savings: working in Eco Mode with reduced engine speed
Idle automation reduces speed to 40% of operating speed
Stop automation switches the engine off when not needed
Optimized settings of engine and hydraulics reduces fuel consumption
Four ways to save fuel
RPM1800 ECO
RPM0
RPM1400
RPM800
0 s 5 s 8 s 5 min
Work Idle Stop
Subject to technical changes. Further options available upon request.
Quiet operation
Consistently quiet operation thanks to decoupled engine mounts and soundproofing in the doors
Soundpower level according to 2000/14/EC up to 2 dB lower than required
High-capacity cooling
Constant, reliable performance thanks to large-dimensioned and robust fans and coolers
Water and oil coolers with top-notch efficiency thanks to axial-piston pump and motor control and ondemand thermostatic control
Fan reversal for cleaning in series
3 4
3
4
5
5
No-slip work surfaces Hand rails* 2 cameras to the right and rear Platform with railing next to cab sliding door
Maximum safety
Subject to technical changes. Further options available upon request.
Powerful hydraulic system
Strong pumps with power reserves Top efficiency thanks to large-dimensioned hydraulic valves and lines
Extra-long change intervals of 4,000 opera-ting hours through initial fill-up with special oil with extended service life when using SENNEBOGEN HydroClean*
2
5
1
* Option
6
Slliding ddddddooooooo
rrr
SSSSSSEEEENNNCCCCCOOOOONNNNN
The premium cab.
consoles and ergonomic joysticks that move with the seat
pleasant grip through ergonomic design
precise control of all movements through direct and sensitive function activation
quick access to all operating controls through optimized design of all push-buttons and switches
ticks
mic design
ents
optimum cab climate with automatic air conditioning system, partial tinted glass
pleasant and equal temperature disper-sion by means of 9 nozzles
panoramic view
comfort seat with air suspension
very quiet through optimized noise insulation
highest safety & comfort with sliding door, wide door opening
ergonomically arranged operating con-trols for fatigue-free and relaxed working
12 V, 24 V, and USB charging sockets, hands-free telephone preparation, doc-ument box
various options: electric cool box behind driver´s seat, seat air conditioning
Features
7* Option
Maintenance and service made easy.
SENNEBOGEN HydroClean*
Optimal protection of hydraulic components thanks to 3 μm micro-filter
Cleaner hydraulic oil, longer oil service life
Central measuring points
Easily accessible Inspect the entire hydraulic system quickly
Clear labeling
All parts labeled with a unique part number
Easy and reliable spare parts ordering
Fast and easy diagnostis thanks to the clearly labeled electrical distributor
Easy accessibility to all service points of the machine
Automatic central lubrication for equipment and slewing gear raceway
Optimized for maintenance
8
Maxcab Industry
* Additional information on our crawler undercarriages can be found in the 830 R E-Series brochure.
Modular design - versatile solutions
3,00 m
2,60 m
E300/260
2,70 m
Attachments
Orange peel grab
Clamshell grab
Magnetic plate
Scrap metal shears
Equipment options (others available upon request)
Undercarriage variants
Uppercarriage
Cabs Cab elevation K15 K17 B16
Diesel-hydraulic drive
Electrohydraulic drive
Motorized cable reel
Transformer
Options
K14 K14 ULM K13 VT
Vacuum traverse
Maxcab M
E270
max.4,5 m
Crawler* R35/340
Crawler* T41/380
Crawler special*R44/380
4-point- pedestal* ST44
max.1,5 m 0,5 m
max.4,5 m
0,5 m
Mobile MHDMP41
Mobile MMP30
Mobile HDSMP34
Mobile TrailerMP38
max.1,5 m
max.1,5 m
99* Option
Advantages at a glance
High load capacities even when fully extended, thanks to massive cylinders
Better illumination of the work area through powerful LED headlights*
Safe entry and exit thanks to railings*, grip handles and no-slip steps
High stability due to the broad outrigger area
Reliable operation through robust and FEM-optimized equipment
Sliding door for convenient entry and exit
Safe entry and exit thanks to platform with railing
Ideal overview and safe working height thanks to stable cab elevation
Robust side cover made of recyclable sheet steel
10
Technical data, equipment
UPPERCARRIAGEDesign Torsion-resistant box design, precision
crafted, steel bushings for boom bearings. Extremely service-friendly design, longitudinal engine
Central lubrica-tion
Automatic central lubrication for equipment and slewing gear
Electrical sys-tem
Central electrical distributor, battery disconnect switch
Cooling system 3-circuit cooling system with high cooling out-put, thermostatically regulated fan drive for oil cooler and water cooler, fan reversal for cleaning
Options Slewing gear brake via foot pedal Hand rail at the upper structure for additional safety
LED lighting packages Fire extinguisher Sea climate resistant coating Electric heater for hydraulic tank
SLEWING DRIVEGearbox Compact planetary gear with bent-axis
hydraulic motor, integrated brake valves
Parking brake Spring-loaded multi-disk brake
Slewing ring Strong slewing ring, sealed
Slewing speed 0-8 rpm, variable
HYDRAULIC SYSTEMLoad sensing / LUDV hydraulic system for hydraulic, pilot-controlled work functions
Pump type Swashplate-type variable-displacement piston pump, load pressure-independent flow distri-bution for simultaneous, independent control of work functions
Pump control Zero-stroke control, on-demand flow control – the pumps only pump as much oil as will actually be used, pressure purging, load limit sensing control
Delivery rate 520 l/minOperating pressure
max. 350 bar
Filtration High-performance filtration with long change interval
Hydraulic tank 310 lControl system Proportional, precision hydraulic actuation of
work movements, 2 hydraulic servo joysticks for the work functions, additional functions via switches and foot pedals
Safety Hydraulic circuits secured with safety valves, emergency lowering of the equipment at engine standstill, pipe fracture safety valves for lift cylinder and stick cylinder
Options Bio-oil – environmentally friendly ToolControl for programming pressure/rate for up to 10 tools
Additional hydraulic circuit for shear attachment Load moment warning with capacity utilization indicator
Overload safeguard with overload shutdown 3 μm hydraulic micro-filter - SENNEBOGEN HydroClean
ENGINEPower Stage V:
Rated Power: 168 kW at 2200 rpm 188 kW at 1900 rpm Stage IIIa: Rated Power: 164 kW at 2000 rpm 172 kW at 1800 rpm
Model Cummins 6.7 Direct injection, turbo charged, charge air cooler, reduced emissions, Eco Mode, idle automation, stop automation
Cooling Water-cooled
Diesel filter with water separator and heating system
Air filter Dry filter with integrated pre-separator, automatic dust discharge, main element and safety element, contamination indicator
Fuel tank 450 lDEF tank 45 l Electr. system 24 VBatteries 2 x 150 Ah, main switch
Options Engine block heater for temperatures below -20 °C
Electric fuel pump Jump-start battery terminals
Subject to change.
MACHINE TYPEModel (type) 830
Options Low-temperature packages Hydraulically driven magnetic generator 15 kW/20 kW
Telematic system SENtrack DS
11
Technical data, equipment
EQUIPMENTDesign Decades of experience, state-of-the-art
computer simulation, highest level of stabili-ty, longest service life, large-dimensioned and low-maintenance bearing points, sealed special bearing bushes, precision-crafted, quick-release couplings on the connections - open/close/rotate grapple
Cylinders Hydraulic cylinders with high-quality sealing and guide elements, end position damping, sealed bearing points
Options Ball valves on the hydraulic lines - open and close grab
nickel-plated and chrome-plated Float position of the equipment Hoisting limiter / stick limitation adjustable for stop settings, e.g. in the hall
Multi-coupling
UNDERCARRIAGEDesign Strong mobile undercarriage with
integrated 4-point outriggers, steering axle as hydraulically locking pendulum axle, pendulum axle cylinder with pipe fracture safety valves
Drive All-wheel drive powered by a variable-dis-placement hydraulic motor with direct- mounted, automatically actuated brake valve and 2-stage power shift transmission, strong planetary axles with integrated steering cylin-ders, service brake in 2-circuit system
Parking brake Spring-loaded multi-disk brake
Tires M: solid-rubber tires 12.00-20, 8xMHD: solid-rubber tires 12.00-20, 8xMHDS: solid-rubber tires 16.00-25, 4xTrailer: pneumatic tires 650/65-R25, 4x
Speed 0 - 7 km/h stage I0 - 20 km/h stage IITrailer 25 km/h
Options MHD: pneumatic tires 12.00-20, 8x MHDS: pneumatic tires 20.50-R25, 4x
Additional pushing blade for 4-point outriggers
Individual outrigger actuation Protection for travel drive, shunting coupling
OPERATING WEIGHTMass
Notice
830 M with MP30E, operating equipment K17 and grab 600 l approx. 38,500 kg
830 MHD with MP41, operating equipment K17 and grab 600 l approx. 40,000 kg
The operating weight varies depending on the model.
Subject to change.
ELECTRIC DRIVE Option Power: 132 kW / 400 V / 50 Hz
Total connected load 270 kVA, machine fusing 315 A at 400 V - motor start-up via star-delta circuit Alternative power: 160 kW / 400 V / 50 Hz
Advantages: lowest operating costs, quiet and virtually vibration-free work, long service life of hydraulic components
CAB Cab elevation E270, hydraulically elevating cab
Cab equipment Sliding door inc. sliding pane, vibration damped, tinted safety glass, front pane can be openend, roof window, windscreen wiper for front pane, radio preparation, air-suspended comfort seat, joystick steering, SENNEBOGEN SENCON control & diagnosis system
Options Tiltable cab, 30 ° Cab elevation E300/260, can be elevated and moved forward hydraulically
Maxcab Industry Armored-glass windshield Armored-glass sunroof Safety side window and rear window Windscreen wiper for front window/ skylight
Rolling shade for roof window and windshield
FOPS protective roof guard Protective front guard Charcoal filter for circulating and outside air Auxiliary heating Climatic seat Radio Electric cool box
12
[m]2 4 6 8 2 60 32 5 76 9 110 1 112 3 114 5 116 7 18
-8
-6
-4
-2
0
2
4
6
8
10
12
14
16
18
-7
-5
-3
-1
1
3
5
7
9
11
13
15
17
1221 .77
1661 88
7.2
4.8
4.6
5.0
9..6666
1010.810
12 1
8..3
4.4.8
6.66 00
7.77 77
8.2
8.9
9 6
9.5
8.8 44
4.4 999
5.99
6.6
6.6
6.6 88
7.2
7.6
8 0
7.8
6.6 99
4.8
5.8
6.1
6.6 22
6.4
6.6
6 9
6.4
5.5 77
4.44.44
5..4
5.5.66
5..7
5..9
6 0
00
5..3
4.44.5
4.4 88
5.2
5.2
5.3
5.5 22
4.3
4,2,
4,33
4.4 2222
4,11
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
Undercarriage MP30 Compact boom 8.5 mGrab stick 7.0 m
Cab Maxcab E270, hydraulically elevating
Load ratings
Technical features and dimensions subject to change.
Machine shown reversed
Technical features and dimensions subject to change.
20181008085355
K15
13
[m]2 4
-8
-6
-4
-2
0
2
4
6
8
10
12
14
6 8 2 6
16
0 32 7 6 9 110 1 112 3 114 5 116 7 18
18
-7
-5
-3
-1
1
3
5
7
9
11
13
15
17
9.9.99
110.1 .9
5.9
5.2
5.3
5.00
7.77 66
8.1
8.7
9.6
9.2
8.6
7.7 66
5.0
5.5 77
6.1
6.2
6.3
6.6 66
6.9
7.2
7.7
7.6
7.1
6.6 44
4,14,1
55.555 0000
5.5
5.6
5.7
5.5 88
6.0
6.2
6.4
6.5
6.3
6.0
5.5 44
4,14,1114,
4..888
5..1
5..1
5.5.22
5..3
5..4
5..5
5..5
5..4
5..0
4.4.55
4,14,1
4.555
4.7
4.4 77
4.7
4.8
4.8
4.4 88
4.3
3.3 77
,14,14,11
4.4 33
4.3
4.3
4
4.4 22
3
3,3,444
3.66
.7
3.3 66
.44
Load ratings
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
Technical features and dimensions subject to change.Technical features and dimensions subject to change.
Undercarriage MP30 Compact boom 9.8 mGrab stick 7.5 m
Cab Maxcab E270, hydraulically elevating
Machine shown reversed
K17
20181008085512
14
[m]2 4 6 8 2 60 32 5 76 9 110 1 112 3 114 5 116 7 18
-8
-6
-4
-2
0
2
4
6
8
10
12
14
16
-7
-10
-9
-5
-3
-1
1
3
5
7
9
11
13
15
3.9
4.3
4.44 66
9.9.22
10.0.10..66
6..5
6..3
6.6.44
6.77
7.7.7.444
8.2
8.8 99
9.5
9.4
9.9 00
8.2
,1
55.5.555 444
5.8
6.3
6.8
7.7
7.
7.6
7.7 44
6.8
111
4.777
4.7
4.8
5.5 00
5.2
5.5
5.8
11
6.4
6.6 22
5.7
4,1,1,
4..444
4..5
4.4.66
4..7
4..9
5..1
5.5.33
55.55.5555
4..8
4,4,0
4,000
4.4 33
4.4
4.5
4.6
4.4 77
4.8
4.8
4,04,4,44 0444
4,1
4.1
4.2
4.4 33
4.3
4.2
Technical features and dimensions subject to change.
Load ratings
B16
Undercarriage MP30 Compact boom 9.4 m BananaGrab stick 7.0 m
Cab Maxcab E300/260, can be elevated and moved forward hydraulically (option)
Machine shown reversed
20181008085654
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
15
[m]2 4 6 8 12 160 32 5 76 9 110 1 112 3 114 5 116 7 18
-6
-4
-2
0
2
4
6
8
10
12
14
16
18
-5
-8
-7
-3
-1
1
3
5
7
9
11
13
15
17
5.5 8
9.9 111
9
10
11
7
7
6.6 000
7.1
7.2
7.3
7 66
0
6
2
7
7.7
6.0
6.3
6.4
6.6 55
6.8
7.1
3
7.4
7.0
6.3
5.6
5.6
5.5 77
5.8
6.0
6.1
6.0
5.7
5.0
5.0
5.5 11
5.1
5.2
5.2
4..6
3.9
4.55
4.5
4.4
4.4 33
Technical features and dimensions subject to change.
Load ratings
K14 ULM
Undercarriage MP30 Compact boom 8.5 mGrab stick 6.0 m ULM
Cab Maxcab E270, hydraulically elevating
Machine shown reversed
20181008085757
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
830 M with undercarriage type MP30
830 M with undercarriage type MP30 (series) and hydraulically elevating cab type E270
Load boom Grab stick Transport length (L) Transport height (H)K15 8.5 m 7.0 m 12.45 m 3.40 mK17 9.8 m 7.5 m 13.75 m 3.45 mB16 9.4 m Banana 7.0 m 13.40 m 3.50 mK14 ULM 8.5 m 6.0 m 12.45 m 3.40 m
3390
2650
6040
3100
300050005500
3000
445040402750
270
105
3390
380
(675)
Transport width 2.750 mm
Solid-rubber tires
830 M with cab type E300/260 (option), can be elevated and moved forward hydraulically
16
Dimensions
H
L3420
3100
258
3420
3000
6420
Dimensions in [mm]Technical features and dimensions subject to change.
MHD / MHDS
17
[m]2 4 6 8 12 160 32 5 76 9 110 1 112 3 114 5 116 7 18-8
-6
-4
-2
0
2
4
6
8
10
12
14
16
18
-7
-5
-3
-1
1
3
5
7
9
11
13
15
17
9
44444444444444
15,115,11
4,9
5,0
10,1,,1,
111111,44
11,66
9,2
8,8
5,5 66
6,6,66,66
7,55
7,777 99
8,5
9,2
10,5
10,3
9,5
5,5 66
6,5
6,7
6,8
7,7 00
7,4
7,8
8,6
8,3
7,8
5,4
6,1
6,2
6,6 44
6,6
6,8
6,9
6,5
5,55,0
5,77
5,5 88
5,9
6,0
6,6 22
5,8
5,3
4,444 00
5,5 11
5,3
5,4
5,5 33
5,2
3,88
4,22
4,4 33
Technical features and dimensions subject to change.
Load ratings
K15
Machine shown reversed
Undercarriage MP41 Compact boom 8.5 mGrab stick 7.0 m
Cab Maxcab E270, hydraulically elevating
20130312094550
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
[m]2 4
-8
-6
-2
2
6
8
10
12
14
6 8 2 6
16
0 32 5 76 9 110 1 112 3 114 5 116 7 18
18
-7
-5
-1
1
5
7
9
11
13
15
17
3,3,33,33333333 222222
2,8
3,2
6,3
5,6
5,6
5,3
8,9
9,8
9,5
8,9
5,4
6,3
6 5
7,7
8,0
7 8
4,4 22
5
5
6
6
6
1111
2
2
33
6
7
7
5
2
0
4,8
4,8
4,4 88
4,9
5,0
00
4,999
4,7
4,4
4,000
4,4 44
4,4
4,4
4,4 33
4,4,44,44,0
3,6
3,8
3,3 77
3,5
MHD / MHDS
18 Technical features and dimensions subject to change.
Load ratings
K17
Machine shown reversed
Undercarriage MP41 Compact boom 9.8 mGrab stick 7.5 m
Cab Maxcab E270, hydraulically elevating
20130312091429
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
[m]2 4 6 8 2 60 32 5 76 9 110 1 112 3 114 5 116 7 18
-8
-6
-4
-2
0
2
4
6
8
10
12
14
16
-7
-10
-9
-5
-3
-1
1
3
5
7
9
11
13
15
3,03
4,0
4,2
4,6
5,05 05
9,499
1010,8,10
6,9
6,7
6,86 8
6,88
777
8
9
9
99
8
55,55 555,55
6,0
4
9
44
9
8
55
9
4,888
4,8
4,9
5,15 1
5,3
5,6
6,0
6,6 33
6,666
6,5
6,6 33
5,8
4,00
4,5
4,6
4,4 77
4,9
5,1
5,3
5,55 5
55,65
5,335
4,8
4,4,0
4,22
4,4 44
4,5
4,6
4,7
4,4 88
4,9
4,9
4 8
4,44,44 000
4,1
4,2
4,3
4,4 33
4,3
4,3
MHD / MHDS
B16
Machine shown reversed
19Technical features and dimensions subject to change.
Load ratings
Undercarriage MP41 Compact boom 9.4 m BananaGrab stick 7.0 m
Cab Maxcab E300/260, can be elevated and moved forward hydraulically (option)
20181008103423
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
[m]2 4 8 60 32 5 76 9 110 1 112 3 114 5 116 7 18-6
-4
-2
0
2
4
6
8
10
12
14
16
18
-5
-3
-1
1
3
5
7
9
11
13
15
17
20
19
11,8,8,8
15,6
6666 9
33,3,3333,111
3,1
3,9
6,,6,,4
9,9,9,9,444
10,2
11,3
12 2
1
66
7
7
7
77
8
8
9
7
66
5
5
5
77
0
3
5
4,4 5
5,8
5,8
5,5 99
6,0
444
5,2
5,,2
5,5,22
5,,3
5,,4
5,,4
5,5,33
4,8
3,333 77
4,66
4,6
4,6
4,4 44
4,2
MHD / MHDS
Machine shown reversed
K14 ULM
20 Technical features and dimensions subject to change.
Load ratings
Undercarriage MP41 Compact boom 8.5 mGrab stick 6.0 m ULM
Cab Maxcab E270, hydraulically elevating
20130312103033
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
830 MHD with undercarriage type MP41, hydraulically elevating Maxcab type E270, tires 12.00 - 20, 8x, transport width 3,000 mm, working weigth with boom K17, 600 l orange peel grab, approx. 40,000 kg
MHD
Load boom Grab stick Transport length (L)
Transport height (H)
K15 8.5 m 7.0 m 12.5 m 3.45 mK17 9.8 m 7.5 m 13.8 m 3.45 mB16 9.4 m 7.0 m 13.4 m 3.5 mK14 ULM 8.5 m 6.0 m 12.5 m 3.45 m
3450
2650
6100
3100
3200550060254880
44653000
2750
3450
265
3425(675))
H
L
Transport width 3,000 mm
Solid-rubber tires 12.00-20, 8x
21Technical features and dimensions subject to change.
Load ratings
MHDS
3100
3710
3000
6700
3200
5600
6125
1705
5080
4665
3000
365
3425
285
750(675)
2585
Load boom Grab stick Transport length (L)
Transport height (H)
K15 8.5 m 7.0 m 12.5 m 3.7 mK17 9.8 m 7.5 m 13.8 m 3.7 mB16 9.4 m 7.0 m 13.4 m 3.8 mK14 ULM 8.5 m 6.0 m 12.5 m 3.7 m
L
H
Transport width 3,000 mm
Solid-rubber tires 16.00-25, 8x
830 MHDS with undercarriage type MP34, Maxcab can be elevated hydraulically, tires 16.00 - 25, 4x, transport width 3000 mm, working weight with boom K17, 600 l orange peel grab, approx. 41,000 kg
22 Technical features and dimensions subject to change.
Load ratings
[m]2 4 6 8 120 32 5 76 9 110 1 112 3 114 5 16
-6
-4
-2
0
2
4
6
8
10
12
14
-5
-3
-1
1
3
5
7
9
11
13
16
15
14,554,51 5
17,11 1
5,555 0000
4,9
10,10100,33
11,33
12,,5
10,,7
9,8
6,666 444
77,7 999
8,2
8,4
8,8 88
9,4
10,0
10,7
10,1
8,9
6,44
7,4
7,5
8,0
8,4
8,7
8,3
7,4
6,66,1
6,8
6,6 99
7,1
7,3
6,8
5,555,00
6,6 33
6,3
6,4
6,4
66,6,6,,1
5,6
5,11
5,5
5,5 33
Trailer
K14
Machine sreversed
23Technical features and dimensions subject to change.
Load ratings
Undercarriage MP38 Compact boom 8.2 mGrab stick 5.8 m
Cab Maxcab E270, hydraulically elevating
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
830 trailer, operating weight with boom K14, 1.5 sqm log grab, approx. 43,500 kg
Trailer3700
12200
(12700)
12400
3700
2650
6350
3100
32005620
(6860)
1730
6550
Transport width 3,400 mm, extremely high pulling force for pulling heavy trailers
Pneumatic tires 650/65-R25, 4x
443
4032
4541
4268 224
3255
3398
(675)
3425
2750
24 Technical features and dimensions subject to change.
VARIOTOOLFrom a high-performance handling machine to a multi-functional high-performance tool carrier
One basic system for different attachments Robust and intelligently simple Locking and changing the attachments without exiting Maximum versatility The material handling machine as a tool carrier The "VarioTool" quick changing system for material handling
changes attachments fast and reliably
Stick / shear can be supported without support frame Automatic valve protection in coupled and decoupled state Effective change of the attachment: simple – fast – reliable Full power with: - Orange peel grab
- Shear - Magnet - Sorting grab
Fast and reliable changing of the attachment in seconds from the driver seat
25Technical features and dimensions subject to change.
[m]2 4 6 8 20 32 5 76 9 110 1 112 3 14
-6
-4
-2
0
2
4
6
8
10
12
14
-5
-3
-1
1
3
5
7
9
11
13
16
15
14,1141 44
6 8
8,1
7,8
8,8 3
10,0,1
11,11
13,0
12,2
10,6,
6,6 66
88,8 111
8,0
8,8 11
8,5
9,0
10,0
9,5
8,4
6,44
7
7,7 22
7,4
7,7
8,0
7,6
6,6
,66
6,6 55
6,
6,
6,
6,
3333
8
8
66
3
66666
VARIOTOOL
K13 VT
Machine shown reversed
26 Technical features and dimensions subject to change.
Load ratings
Undercarriage MP41 Compact boom 7.2 mGrab stick 5.7 m
Cab Maxcab E270, hydraulically elevating
All load ratings are specified in tons (t) and apply at the end of the stick, without attachment, on solid, level ground. Attachments such as grabs, magnets, load hooks, etc. are part of the specified load ratings. The specified values are 75% of the static tipping load or 87% of the hydraulic lifting force in accordance with ISO 10567. In accordance with EU standard EN 474 / 5, hydraulic material handling machines used for hoisting must be equipped with pipe fracture safety devices on the hoist and stick cylinders and an overload warning device. Loads rating apply to a machine with deployed 4-point outrigger support and 360° slewing.
27Dimensions in [mm]
Recommended grapples
Detailed information on grabs, as well as log grabs, quick-release systems, and other attach-ments can be found in the "Attachments" brochure
1) Weight information without grapple suspension, stick bolts, hose system
2) Half-open shells: shell sheet steel width 400 mm, 500 mm for 1250 l capacity and higher
*) Available upon request
Orange peel grab SGM (5 shells)
Design / size Grapple capacity Weight1 Maximum
piled density
SGZ l kg t / m³
1000.40 1000 1270
2.01200.40 1200 13601400.40 1400 14201600.40 1600 15301500.50 1500 1950
2.62000.50 2000 22002500.50 2500 2300
2.03000.50 3000 24904000.50 4000 2880 1.6
3000.50 L 3000 21401.0
3500.50 L 3500 22604000.50 L 4000 2480
0.84500.50 L 4500 2600
1500.50 HD 1500 22403.5
2000.50 HD 2000 2535
SGZ clamshell grab
Type series / model Power Weight Breakaway force Load-bearing capacity in kg
WOKO kW kg kN Slab (safety factor 2)
S-RSL 13 10.5 1300 260 13000
S-RSL 15 12.2 1950 360 18000
S-RLB 12.5 8.8 1310 280 14000
S-RLB 13.5 10.0 1700 300 15000
S-RLB 15 11.7 2400 380 19000
Recommended magnetic generator: 15 kW/20 kW
Magnetic plates
Orange peel grab SGM (4 shells)Design / size Grapple
capacityWeight1 Maximum
piled densityShell form
HO G
SGM l kg kg t / m³
400.40-4 400 1570 1720
2.0
600.40-4 600 1600 1790
800.40-4 800 1685 1930
1000.40-4 1000 1755 2085
1250.40-4 1250 1850 2200
Design / size Grapple capacity
Weight1 Maximum piled densityShell shape 2
HO G
SGM l kg kg t / m³
400.40 400 1820 1920
2.0
600.40 600 1910 2035
800.40 800 1960 2140
1000.40 1000 2040 2290
1250.40 1250 2180 2415
1400.40 1400 2250 2500
www.sennebogen.com
Orde
r no.
/ it
em n
o. 17
9552
830M
-E-1
2151
5-10
1615
-011
910-
0719
d-11
19du
-012
010
This catalog describes machine models, scopes of equipment of individual models, and configuration options (standard equipment and optional equipment) of the machinesdelivered by SENNEBOGEN Maschinenfabrik GmbH. Machine illustrations can contain optional equipment and supplemental equipment. Actual equipment may vary depending on the country to which the machines are delivered, especially in regard to standard and optional equipment and tolerances.
All product designations used may be trademarks of SENNEBOGEN Maschinenfabrik GmbH or other supplying companies, and any use by third parties for their own purposes may violate the rights of the owners.Please contact your local SENNEBOGEN sales partner for information concerning the equipment variants offered. Requested performance characteristics are only binding if they are expressly stipulated upon conclusion of the contract. Delivery options and technical features are subject to change. Errors and omissions excepted. Equipment is subject to change, and rights of advancement are reserved. © SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany. Reproduction in whole or in part only with written consent of SENNEBOGEN Maschinenfabrik GmbH, Straubing, Germany.
SENNEBOGEN Maschinenfabrik GmbH Sennebogenstrasse 10 94315 Straubing, Germany
Phone +49 9421 540-144/[email protected]