Street Light Module Series 63in1 Street Lighting Module ...

Typical Applications :

■ Street Lighting

■ Spot light

■ High / Low Bay

Features :

■ High Brightness SMD LED

■ Low Power Requirement & Energy Efficient

■ Suitable for Restricted Space

■ Waterproof Level IP66 (Wet Location)

■ Easy design-in, fast time to market

■ Typical luminous efficacy: 110lm/W (under hot luminous test)

■ High quality of light and low glare without scattered light

■ Long lifetime: 50,000 hours with Edison’s LM-80 certified components (EMC 3030)

■ Better heat dissipation performance

63in1 Street Lighting Module Datasheet

Street Light Module Series

www.edison-opto.com

Copyright © 2016 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 3 1

www.edison-opto.com


Table of Contents

General Information .........................................................................................................................................................3

Mechanical Dimensions ..................................................................................................................................................4

Absolute Maximum Ratings ..........................................................................................................................................5

Technical Data ....................................................................................................................................................................5

Light Patterns ......................................................................................................................................................................7

Substrate Temperature Measurement Point ...........................................................................................................7

Assembly Instruction .......................................................................................................................................................7

Driver Recommendation (MW) ....................................................................................................................................8

Driver Recommendation (Inventronics) ....................................................................................................................9

Waterproof Connectors Recommendation .............................................................................................................10

System overview ................................................................................................................................................................11

Package Information ........................................................................................................................................................12

Revision History .................................................................................................................................................................13

About Edison Opto ...........................................................................................................................................................13

www.edison-opto.com


General Information

In view of the energy saving and long lifetime advantages of LED, replacing traditional street light with LED lighting is an inexorable trend. Integrating LED packaging and optical design abilities, Edison Opto provides an IP66 waterproof solution-63in1 street light module whose secondary optical design is based on the ME3 requirements. It delivers homogeneous illumination with lower energy consumption, providing safe and bright road environments. 63in1 Street Light Module is suitable for general road and fast road.

Introduction

Product Nomenclature

6 S A D - 0 0 x x x x 7 x x 0 xX1-X2 X3 X4 X5 X6-X7 X8-X11 X12 X13-X14 X15-X16

X1-X2Product Module

X3Module Series

X4Power

X5-

X6-X7Watt

Code Type Code Type Code Type Code Type Code Type

6SStreet Light

ModuleA 63in1 PLCC 3030 D DC - - 00 non Driver

X8-X11Beam Angle

X12CRI

X13-X14Color

X15-X16Serial Number

Code Type Code Type Code Type Code Type

715M 70x150-M 7 CRI70 40 4000K - -

0090 90o 50 5000K

57 5700K

www.edison-opto.com


Unit: mmTolerance: ± 2.0 mm

Mechanical Dimensions

此標示面曬LDK1006M紋

245.27±0.3<A>

2*40.00±0.15<C>2*115.00±0.3<B>

70.27±0.2<D>

2*29

.00±0.1<E>

9.60

6.76

2.70± 0.05

1.00

2.50±0.1<F>

A A

B

B

SECTION A-A

A

B

300.0

287.0

30 70

300.0

287.0

5.5

30 70

6SAD-00xxxx7xx03/ 6SAD-00xxxx7xx04/ 6SAD-00xxxx7xx05

49.6

49.6

Angle:90o Angle:70x150o whirl 90o

www.edison-opto.com


Technical Data

Parameter Rating/Value Units

Power Consumption 40 50 60 W

Typ. Flux 4500 5300 6200 lm

Typ. Operating Voltage 52 53 55 V

Typ. Operating Current 700 860 1050 mA

Color Temperature 4000/5000/5700 K

CRI 70 --

Weight 650 g

Notes:1. The typ. flux item is operating on hot luminous test with 2 hours.2. Flux is measured with an accuracy of ±15%.3. Forward Current is measured with an accuracy of ±10%.4. Power consumption has ±10% tolerance.5. Weight has ±50g tolerance.6. Driver Recommendation Specification 50~60V.7. Never plug the driver to AC outlet before the Module is properly connected; otherwise, it may damage the LEDs permanetly.

Parameter Symbol Rating Units

Casing Temperature Tc 80 °C

Operating Temperature Topr -40 ~ +50 °C

Storage Temperature Tstg -20 ~ +60 °C

Absolute Maximum Ratings

Notes:1. Proper current derating must be observed to maintain casing temperature below the maximum at all time.2. LEDs are not designed to be driven in reverse bias.3. The operating temperature* is based on the ambient temperature to the heatsink in 5 cm distance.

www.edison-opto.com


Order Code Beam Angle Safety CCT (K) CRI Dimension (mm)

6SAD-00715M74003 70x150o CE

4000

70 300

6SAD-00715M74004 70x150o UL

6SAD-00715M74005 70x150o whirl 90o CE

6SAD-00009074003 90o CE

6SAD-00009074004 90o UL

6SAD-00715M75003 70x150o CE

5000

6SAD-00715M75004 70x150o UL

6SAD-00715M75005 70x150o whirl 90o CE

6SAD-00009075003 90o CE

6SAD-00009075004 90o UL

6SAD-00715M75703 70x150o CE

5700

6SAD-00715M75704 70x150o UL

6SAD-00715M75705 70x150o whirl 90o CE

6SAD-00009075703 90o CE

6SAD-00009075704 90o UL

www.edison-opto.com


Assembly Instruction

Street light module Driver supply Street light assembly

+ +

Notes:1. Use M6 screw to secure the lamp on a level surface.2. Push and lock the module.

Ts points

Notes: 1. It strongly recommend to check the temperature of Ts be below 80oC while thermal design. 2. Ts: Substrate temperature measurement point

Driver

AC Input

Substrate Temperature Measurement Point

Light Patterns

Beam Angle 70ox150o & 70x150o whirl 90o Beam Angle 90o

1515

105

90

75

60

4530

90

75

60

4530

1200160020002400

400800

0

105

1515

105

90

75

60

4530

90

75

60

4530 0

105

500600

300

100200

400

www.edison-opto.com


Part. No Picture SPC Solution

HLG-40H-54A DC Output Voltage 54VdcRated Output Current 0~0.75AAC Input Voltage 90~305V

For 1 pcs 40W


For 1 pcs 40W/50W/60W


For 2 pcs 40W For 1 pcs 60W


For 2 pcs 40W/50W


For 3 pcs 40WFor 2 pcs 50W/60W


For 4 pcs 40WFor 3 pcs 50WFor 2 pcs 60W


For 4 pcs 40WFor 4 pcs 50WFor 3 pcs 60W


For 5~6 pcs 40WFor 5 pcs 50WFor 4 pcs 60W


For 6 pcs 50WFor 5 pcs 60W


For 6 pcs 60W

Driver Recommendation (MW)

www.edison-opto.com


Part. No Picture SPC Solution

EUC-052S070SVDC Output Voltage 38~75Vdc

Rated Output Current 0.7AAC Input Voltage 90~305V

For 1 pcs 40W



For 2pcs 40W

EUC-150S070SVADC Output Voltage 107~214Vdc


For 3pcs 40W



For 4~5pcs 40W

EUC-052S070SV-HP02DC Output Voltage 41~61VdcRated Output Current 0.84AAC Input Voltage 90~305V

For 1pcs 50W

EUC-100S070SV-HP01DC Output Voltage 90~122Vdc


For 2pcs 50W



For 3pcs 50W



For 4pcs 50W

EBC-255S105SV-0004DC Output Voltage 160~290Vdc


For 5pcs 50W

EUC-075S105SVDC Output Voltage 36~72VdcRated Output Current 1.05AAC Input Voltage 90~305V

For 1pcs 60W

EUC-150S105SVADC Output Voltage 71~142Vdc


For 2pcs 60W



For 3pcs 60W



For 4pcs 60W

Driver Recommendation (Inventronics)

www.edison-opto.com


Picture Description

IP68 connector for 1 modules in series (40W/50W/60W)

IP68 connector for 2 modules in series(80W/100W/120W)




Waterproof Connectors Recommendation

www.edison-opto.com


63in1 street light modules are for use with LED drivers and waterproof connector the interface. In this combination, the LED modules and the LED drivers provide convenient and parallel connection series circuit.

Driver

Driver

Driver

Driver

Driver

AC Input

AC Input

AC Input

AC Input

AC Input

System overview

www.edison-opto.com


Package Information

Notes:1. Pack Dimensions for Industrial Packaging : 610*470*160mm2. Total weight for Industrial Packaging : 16KG (weight of empty packaging 3KG)

10pc /Paper tray 2Paper tray/ Carton 20pc/ Carton

Marking Label Specifications

Product Code：6SAD-00wwww7yyzzInput Voltage ：DC 50-60V Input Current ：Max 1.05A (60W)Beam Angle ：70x150°-MColor/CCT ： 5000KDate：2015/10

IP66

UL NO. E476352Product Code： 6SAD-00wwww7yyzzInput Voltage ：DC 50-60V Input Current ：Max 1.05A (60W)Beam Angle ：70x150°-MColor/CCT ： 5000KDate：2015/10For Wet Location

Packing Label Specifications

IP66 for CE Marking Label

Wet Location for UL Marking Label

1. Part Name : 6SAD-00wwww7yyzz2. Spec:X1 X2 X3 - x1 : spec of Max. rating - x2 : spec of Typ. Module Color - x3 : spec of Beam Angle3. Bin: X1 X2 - x1 : Bin of LED Luminous Flux - x2 : Bin of LED Color Temperature4. Quantity :Q’ty5. Date : Period of manufacture

Marking Label

www.edison-opto.com


Revision History

Versions Modification Date

1 Establish Order code information 2015/11/24

2

Delete 275mm informationDelete 3500K Order codeAdd 5700K Order codeUpdate angle 70x150o whirl 90o information

2016/04/21

3 Add module Angle picture 2016/05/18

About Edison Opto

Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at www.edison-opto.com

Copyright©2016 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice.

www.edison-opto.com

For general assistance please contact:[email protected]

For technical assistance please contact:[email protected]

Street Light Module Series 63in1 Street Lighting Module ...

Documents

Transcript of Street Light Module Series 63in1 Street Lighting Module ...