STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein...
Transcript of STANDARD LASTAUFNAHME MITTEL STANDARD … der mikroverzahnten Rosette und der Palle stellt sich ein...
www.nordgreif.com
STANDARDLASTAUFNAHME
MITTELGREIFBARE PERFEKTION
STANDARDLOAD HANDLING
DEVICES
Klemmen ClampsZangen TongsTraversen Lifting BeamsC-Haken C HooksSpreizen Spreader Beams
2 INFO | NORDGREIF.COM
NORDGREIFTechnology for the process, safety for people.
For us everything revolves around lifting and transporting heavyloads. Nordgreif designs and produces customised special lift-ing equipment precisely in line with customers‘ needs. Tongs,grabbers, cross beams and manoeuvring devices with mechani-cal, electrical or hydraulic drive are all built at our site near Ham-burg. Customer-oriented advice and individual planning is our particu-lar strength. Thanks to our years of experience, we are also in aposition to supply complex special solutions. Following precise
NORDGREIFTechnik für die Praxis, Sicherheit für den Mensch.
Bei uns dreht sich alles um das Heben und Transportierenschwerer Lasten. Nordgreif plant und fertigt Sonderlastaufnah-memittel genau nach Kundenwunsch. Zangen, Greifer, Traversenund Wendevorrichtungen mit mechanischem, elektrischem oderhydraulischem Antrieb, werden an unserem Standort bei Ham-burg gebaut. Unsere besondere Stärke ist unsere kundenorientierte Beratungund individuelle Planung. Durch unsere langjährige Erfahrung,sind wir in der Lage auch komplexe Sonderlösungen zu liefern.Nach genauer Analyse des Arbeitsablaufes beim Heben und derGegebenheiten vor Ort erstellen wir ein maßgeschneidertesKonzept für jedes individuelle Hebe-Problem. Dabei ist IhreSicherheit unser oberstes Gebot. Wir denken das Undenkbareim Vorfeld und schließen schon in der Konstruktionsphasemögliche Risiken aus. Dabei spielen auch ergonomische Fak-toren eine Rolle: Je einfacher die Bedienung ist, je über-sichtlicher die Steuerung, desto sicherer ist die Arbeit. Technikfür die Praxis, Sicherheit für den Mensch.
Wachsender Zeit- und Kostendruck erfordert eine effiziente Ar-beitsweise. Unsere Lastaufnahmemittel helfen Ihnen, Ihre Las-ten schnell und sicher zu transportieren. Das richtige Werkzeugspart kostbare Zeit! Unsere Geräte werden für eine langeLebensdauer, praxisgerecht und robust ausgelegt. So halten sie selbst extremster Beanspruchung dauerhaft stand.
Wir konstruieren und visualisieren unsere Lastaufnahmemittelauf modernen 3D-CAD-Systemen und führen statische Berech-
nungen im FEM-Verfahren durch. Alle Lastaufnahmemittel wer-den entsprechend den sicherheitstechnischen Vorschriften derBGR 500, der DIN 15018 und DIN EN 13155 ausgelegt unddokumentiert. Das Schweißen erfolgt nach DIN 18800 durchgeprüfte Schweißer. Alle Geräte werden mit umfangreicherDokumentation, CE-Zeichen und Werkszeugnis weltweit aus-geliefert.
Die folgenden Seiten geben Ihnen einen Überblick über diewichtigsten Lastaufnahmemittel und Lösungsansätze für unter-schiedliche Hebe-Probleme. Außerdem zeigen wir Ihnen dasbreite Spektrum unserer Möglichkeiten und stellen Ihnen inter-essante Projekte vor, die wir international realisiert haben.
Wir freuen uns auf Ihren Anruf!
STANDARD LASTAUFNAHMEMITTELGREIFBARE PERFEKTION – NORDGREIF
NORDGREIFSTANDARD LOAD HANDLING DEVICES
3INFO | NORDGREIF.COM
Direkt, kundenorientiert undeffizient in Planung, Beratung und Fertigung.
Direct, customer-oriented andefficient in planning, consultancy and manufacturing.
Infoline: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22E-Mail: [email protected]: www.nordgreif.com
analysis of the operating process and the local factors, wecreate a bespoke concept for each individual lifting problem.Your safety is our top priority. We think the unthinkable in ad-vance and exclude any potential risks during the constructionphase. Ergonomic factors are also taken into account: the sim-pler something is to use and the clearer it is to control, thesafer it is to work with. Technology for the process, safety forpeople.
Growing time and cost pressure requires an efficient workprocess. Our load suspension equipment will help you to moveyour loads quickly and safely. The right tool saves valuable time!Our devices are designed for to be robust for a long service lifein specific conditions. They can even withstand extreme loadsfor extended periods of time.
We devise and visualise our load suspension equipment usingmodern 3D CAD systems and perform design calculations usingthe FEM process. All load suspension equipment is designedand documented in accordance with the safety regulations fromBGR 500, DIN 15018 and DIN EN 13155. Welding is performedby certified welders in accordance with DIN 18800. All equip-ment is supplied worldwide with comprehensive documentation,CE mark and factory certification.
The following pages will give you an overview of our most im-portant load suspension equipment and solutions to variouslifting problems. You will also see the broad range of our possi-bilities and some interesting international projects thatwe have realised.
We look forward to your call!
HebeklemmenLifting Clamps
TrägerklemmenTrägerklemmen
FasshandlingDrum Handling
SpreizenSpreader Beams
DrahtcoilzangenWire Coil Tongs
C-HakenCoil Hooks
ZangenTongs
TraversenLifting Beams
4 INFO | NORDGREIF.COM
Sicherheitshebeklemmen für den vertikalenBlechtransport und zum Wenden und Aufrichten 8Safety clamps for vertical sheet transport and for turning and straightening Sicherheitshebeklemmen mit kardanischerAufhängung 9Safety clamps with gimballed attachment Sicherheitshebeklemmen für Trägerprofile 9-10Safety clamps for beam profiles Sicherheitshebeklemmen für den horizontalen Blechtransport 10-11Safety clamps for horizontal sheet transport Sicherheitshebeklemmen mit glatter Greifplatte 11Safety clamps with smooth grab plates Sicherheitshebeklemmen mit Schutzbelag 12Safety clamps with protective cover Sicherheitshebeklemmen für Blechpakete 12Safety clamps for sheet boards Innen-Trägerklemmen 12Inner beam clampsSicherheitshebeklemmen für Trägertransport und Lagerung 13Safety clamps for beam transport and storage Sicherheitshebeklemmen für Träger und Profile mit kardanischer Aufhängung 13Safety clamps for beams and profiles with gimballed attachment Sicherheitshebeklemmen für Bleche, Profile und Rohre 14Safety clamps for sheets, profiles and pipes Sicherheitshebeklemmen für Platten, Bleche und Profile 14Safety clamps for plates, sheets and profiles Sicherheitshebeklemmen für Spundbohlen mit Fernentriegelung 15Safety clamps for sheet piles with remote unlocking Schraubklemmen 15Screw Clamps Betonrohrgehänge 16Concrete pipe attachment
HebeklemmenLifting Clamps
INHALTSVERZEICHNIS CONTENTS
Trägerklemmen mit Fahrwerk Typ TF 17Beam Clamp with Chassis Type TFTrägerklemmen ohne Fahrwerk Typ T 17Beam Clamp without Chassis Type T
TrägerklemmenBeam Clamps
Drahtcoilinnenzangen 18Wire Coil Inner TongsDrahtcoilaussenzangen 18Wire Coil Outer Tongs
DrahtcoilzangenWire Coil Tongs
Rundprofilzangen 19Round profile tongsRechteckprofilzangen 19Rectangular profile tongsZangen für Ballen und Kisten 20Tongs for bales and boxesLagerkastenzangen 20Stock box tongsWendezangen 21Turning tongsSchienenzangen 21Rail tongsKartonzangen 22Cardboard tongsHolzstammzangen 22Log tongsProfilzangen für Steinblöcke 23Profile tongs for stone blocksTrägerzangen 23Beam Tongs
ZangenTongs
5INFO | NORDGREIF.COM
Fasszangen 24Drum tongsFasszangen für liegende Fässer 24Drum tongs for horizontal drumsFassgeschirr zum Aufrichten, Transportierenund Kippen von Stahlfässern 25Drum gear (FHZ) to straighten, transport and tip steel drums
FasshandlingDrum Handling
Coil-Haken mit Gegengewichtsausgleich 26-27Coil hooks with counterweight balanceCoil-Haken mit Kettenaufhängung 27Coil hooks with chain attachmentCoil-Haken mit Federschwerpunktausgleich 28Coil hooks with spring centroidal balanceCoil-Kipphaken 28Tipping coil hooks
C-HakenCoil Hooks
Traversen starr 29Lifting beams, rigidTraversen verstellbar 30Lifting beams, adjustableAuslegertraversen verstellbar 31Lifting beam adjustable Traversen für Gitterboxen 31Lifting beams for skeleton containers Gabelstaplerschuhe 31Forklift shoes
TraversenLifting Beams
Spreize starr und verstellbar 32Stays, rigid and adjustable Spreize starr mit Schaukelstück 32Spreader Beams, fixed, with rocker Spreize verstellbar mit Schaukelstück 32Spreader Beams, adjustable, with rockerSpreize starr mit Pendelstück 32Spreader Beams, fixed, with pendular suspension lugs Spreize verstellbar mit Schaukelstück 32Spreader Beams, adjustable with pendular suspension lugs
Spreizen / SpreiztraversenSpreader Beams
Belastung / Load:
I
II
III
IV
V
100% 75% 50%
Belastungsschema bei Schrägzug (Einschränkung der Tragfähigkeit) / For load train for diagonal pull
K11
K20
K10
K15
K22 K23
K15 K17
K16 K26
K12 K13 K19
K24 K27
HebeklemmenLifting Clamps
6 INFO | NORDGREIF.COM
HebeklemmenLifting Clamps
Ersatzteilliste für TypenReplacement parts list for housing typesK10, K11, K12, K13, K16, K20, K22, K23, K24
Gehäuse / Body
Aufhänger / Lifting eye
Aufhängebolzen / Suspension boltTraggelenk / Lifting joint
Traggelenkbolze /Lifting joint boltZwischengelenkbolzen /Intermediate joint boltExzenter mit BolzenCan with bolt
Feder / Spring
Zwischengelenkbolzen /Intermediate joint boltZwischengelenk /Intermediate jointPallenbolzen / Jaw bolt
Palle / Pad with screw
Rosette mit SchraubeRosette with screw
7INFO | NORDGREIF.COM
K10 Sicherheitshebeklemmen für den vertikalen Blechtrans-port und zum Wenden und AufrichtenDie Klemme eignet sich sehr gut zum vertikalen Blechtransport von einzelnenBlechen. Um eine sichere Handhabung zu gewährleisten verfügt die Klemmeüber einen Vorspannmechanismus, der die verzahnte Greifpalle über Federkraftbereits vor dem eigentlichen Hebevorgang fest gegen das zu hebende Blechdrückt und dadurch ein Abrutschen der Klemme verhindert. Ein Öffnen der Hebeklemme bei unbeabsichtigter Entlastung ist somit aus-geschlossen. Wegen der mikroverzahnten Rosette und der Palle stellt sich ein Mikroform-schluss ein, da sich Rosetten und Palle Werkstoff der Last hineindrücken.Daher muss man auch geringe Greifspuren an der Last berücksichtigen. DieBlechoberfläche bzw. die Blechhärte muss unter HRC40 liegen. Bei Schrägzugreduziert sich die Tragefähigkeit der Klemme. Bei längeren Blechen empfehlenwir den paarweisen Einsatz, ein 2-Stranggehänge oder in Kombination miteiner Koppeltraverse.
K10 Safety clamps for vertical sheet transportand for turning and straighteningThe clamps are very suitable for vertical sheet transport of individual sheets. To guarantee secure handling the clamps have a tension mechanism, whichpresses the serrated grab pawl against the sheet to be lifted before the actuallifting process using spring resistance and, in so doing, prevents the clampsfrom slipping. Therefore, it is not possible to open the lifting clamp for unintentional loads. Because of the micro-serrated round anchor plates and the pawl, a microformclosure arises, as the anchor plates and pawl press on the material of the load.Therefore, even small grab tracks must be taken into account on the load. Thesheet surface or thickness must be less than HRC 40. The load bearing capa-city of the clamps is reduced in the event of diagonal pull. We recommendusing the pair method for longer sheets, a 2-leg attachment or in combinationwith a coupling lifting beam.
Tragfähigkeit in kgLoad capacity in kg
200200750
100010001000
15002500250025002500
30005000500050005000
1000010000
Typ Bestell-Nr.Type Part No.
NG-K10002015NG-K10002025NG-K10007015NG-K10010020NG-K10010050NG-K10010075
NG-K10015020NG-K10025030NG-K10025050NG-K10025075NG-K10025100
NG-K10030030NG-K10050050NG-K10050075NG-K10050100NG-K10050150NG-K10100060NG-K10100100
ca. Maße in mm / Dimensions approx. (mm)A
0 - 1510 - 250 - 150 - 200 - 500 - 75
0 - 200 - 300 - 500 - 75
25 - 100
0 - 300 - 5025 - 7550 - 10050 - 1500 - 50
50 - 100
B
282834586565
5865657070
7080808585110110
F
95105100160230250
165200230265290
210250275350400320360
H
150150185240300360
250290320340340
335340380540540420450
I
45454565115110
6585115115115
90115125150150125135
V
404050757575
7585858585
85100100100100100110
1,51,52,54812
68101112
12161724263145
Eig.-Gew. ca. kgWeight approx. kg
8 INFO | NORDGREIF.COM
HebeklemmenLifting Clamps
8 INFO | NORDGREIF.COM
K11 Sicherheitshebeklemmen mitkardanischer Aufhängung
Der Grundaufbau dieser Klemme ist wie die o.a. Klemme des TypsK10, jedoch verfügt diese Klemme zusätzlich über ein kardanischesGelenk, um Seitenkraft besser aufnehmen zu können.
K11 Safety clamps with gimballed attachment
The basic design of this clamp is like the aforementioned clamp ofthe K10 type, but this clamp also has a gimballed hinge to applylateral force better.
Tragfähigkeit in kgLoad capacity in kg
200750
1000150025005000
Typ Bestell-Nr.Type Part No.
NG-K11002015NG-K11007015NG-K11010020NG-K11015020NG-K11025030NG-K11050050
ca. Maße in mm / Dimensions approx. (mm)A
0 - 150 - 150 - 200 - 200 - 300 - 50
B
283458586580
F
95100160165200250
H
150185240250290340
I
4545656585115
V
4050757585100
23571018
Eig.-Gew. ca. kgWeight approx. kg
K12 Sicherheitshebeklemmen für TrägerprofileTyp K 12 mit Sicherheitsarretierung. In geöffneter und geschlossenerStellung verriegelbar. Besonders geeignet für den horizontalen Transport.Die Aufhängeöse liegt im Trägerschwerpunkt. Universell einsetzbar, auchpaarweise stirnseitig an Stahlträgern.Lieferbar auch mit kardanischer Aufhängung. Diese Ausführung eignetsich besonders für das paarweise Anschlagen von Stahlschweißkonstruk-tionen.
K12 Safety clamps for beam profilesType K12 with safety lock. Can be locked in open and closed position.Particularly suitable for horizontal transport. The suspension eyes are at the beam‘s centre of gravity. Universal appli-cations, also in pairs on the face of steel beams. Can also be supplied with gimballed attachment. This design isparticularly suitable for paired attachment of welded steel constructions.
Tragfähigkeit in kgLoad capacity in kg
10002500500010000
Typ Bestell-Nr.Type Part No.
NG-K12010020NG-K12025030NG-K12050050NG-K12100060
ca. Maße in mm / Dimensions approx. (mm)A
5 - 208 - 3010 - 5010 - 60
B
6085105115
F
195280360380
H
280380460600
I
85140150150
V
7585100110
7101260
Eig.-Gew. ca. kgWeight approx. kg
9INFO | NORDGREIF.COM
HebeklemmenLifting Clamps
9INFO | NORDGREIF.COM
K13 Sicherheitshebeklemmen für TrägerprofileTyp K 13 mit Sicherheitsarretierung. In geöffneter und geschlossenerStellung verriegelbar. Besonders geeignet für den Transport von T-, Doppel-T- und U-Trägern in vertikaler Flanschlage. Wegen ihrer hohenPresskraft eignen sich diese Hebeklemmen hervorragend zum Wendenvon Trägern.
K13 Safety clamps for beam profilesType K13 with safety lock. Can be locked in open and closed position. Particularly suitable for transport of T, Double-T and U beams in verticalflange bearing. Because of their high force of pressure, these liftingclamps are excellent for turning beams.
Tragfähigkeit in kgLoad capacity in kg
100025004000
Typ Bestell-Nr.Type Part No.
NG-K13010015NG-K13025030NG-K13040032
ca. Maße in mm / Dimensions approx. (mm)A
5 - 1510 - 2710 - 32
B
709090
F
195235280
H
230310400
I
607075
V
758585
61018
Eig.-Gew. ca. kgWeight approx. kg
Tragfähigkeit in kg/PaarPair capacity (kg)
100015002500300050006000800012000
Typ Bestell-Nr.Type Part No.
NG-K15010040NG-K15015050NG-K15025050NG-K15030070NG-K15050060NG-K15060051NG-K15080065NG-K15120100
ca. Maße in mm / Dimensions approx. (mm)A
0 - 405 - 505 - 505 - 705 - 605 - 510 - 650 - 100
B
1515152020255570
C
15001500150015001500150015001500
F
150160170185205230265280
I
95110110125125150175170
L
10001000100010001000100010001000
34
4,51012131835
Eig.-Gew. ca. kg pro Stk.Weight approx. kg per pce.Ø
1618182223363636
V
1618182222363636
K15 Sicherheitshebeklemmen für denhorizontalen BlechtransportDiese Hebeklemmen sind für den paarweisen Einsatz vorgese-hen. Besondere Eignung für den Transport formstabiler Bleche,Blechpakete und Stahlplatten. Durch Verzahnung der Palle wirdein sicheres Greifen der Bleche selbst bei Schräghanggewährleistet. Bei langen Blechen empfehlen wir 2-Paar-Trag-klemmen in Verbindung mit einer Traverse. Bei einemNeigungswinkel größer als 60° verringert sich die Traglast.
K15 Safety clamps for horizontal sheet transportThese lifting clamps are equipped for use in pairs. Particularlysuitable for transporting stable sheets, sheet boards and steelplates. The serration of the pawl ensures secure grab of thesheets even on a diagonal slope. We recommend 2-pair bearer clamps combined with a liftingbeam for long sheets. The bearing load is reduced witha slope angle greater than 60°.
NeigungswinkelWorking angle
30°- 60°60°- 90°90°-120°
TragfähigkeitLoad capacity
100 %70 %50 %
Achtung:Bei Horizontal-Hebeklemmen reduziert sichdie Tragfähigkeit entsprechend demSpreizwinkel. Dies gilt für alle Typen.
Caution:With lifting clamps for horizontaltransport, the load capacity is reducedin accordance with the working angle. This applies to alltypes.
10 INFO | NORDGREIF.COM
HebeklemmenLifting Clamps
K16 Sicherheitshebeklemmen mit glatterGreifplatte
Tragklemme mit Sicherheitsarretierung und glatter großer Andruckplatte fürBleche mit empfindlicher Oberfläche für den vertikalen Transport und zumAufrichten bzw. Ablegen um 90°. Diese Hebeklemme hat eine hohe An-presskraft. Sie wirkt rein kraftschlüssig, ist jedoch nur geeignet für trock-ene, saubere und schmiermittelfreie Oberflächen. Ab einer Tragfähigkeitvon 2,5 t wird der Greifbereich mittels einer Stellschraube vorjustiert.
K16 Safety clamps with smooth grab plates
Bearer clamps with safety lock and smooth, large pressure plate for sheetswith sensitive surfaces for vertical transport and straightening or tilting by90°. These bearer clamps have high force of pressure. They are purely acti-vated by gravity, but are only suitable for dry, clean and lubricant-free sur-faces. From a load capacity of 2.5 t, the grab range is preadjusted using alocking screw.
Tragfähigkeit in kg/StückLoad capacity in kg/pce.
2505005001000150025005000
Typ Bestell-Nr.Type Part No.
NG-K16002050NG-K16005010NG-K16005050NG-K16010015NG-K16015020NG-K16025030NG-K16050050
ca. Maße in mm / Dimensions approx. (mm)A
10 - 500 - 1010 - 500 - 150 - 200 - 305 - 50
B
50706075100120150
F
230210240250280300420
H
330250350300320400500
I
1158011590110130140
V
60607575758590
87109123687
Eig.-Gew. ca. kgWeight approx. kg
11INFO | NORDGREIF.COM
HebeklemmenLifting Clamps
K15 Sicherheitshebeklemmen für denhorizontalen BlechtransportDiese Hebeklemmen sind für den paarweisen Einsatz vorgesehen. Sie habeneinen großen Greifbereich und sind daher besonders gut geeignet für denTransport von Grob- und Feinblechpaketen.
K15 Safety clamps for horizontal sheet transportThese lifting clamps are equipped for use in pairs. They have a large grabrange and, therefore, are very well suited to transporting thick and fine sheetboards.
Tragfähigkeit in kg/PaarPair capacity (kg)
250025005000500050007500
Typ Bestell-Nr.Type Part No.
NG-K15025100NG-K15025150NG-K15050100NG-K15050150NG-K15050250NG-K15075250
ca. Maße in mm / Dimensions approx. (mm)A
5 - 10050 - 1505 - 10050 - 150100 - 250100 - 250
B
152020303055
F
230230250270270290
I
150150150150150170
V
253131313136
141620203535
Eig.-Gew. ca. kgpro Stk.Weight appr. kg per pce.
K19 Innen-TrägerklemmenHebeklemme Typ K 19 als innengreifende Hebeklemme fürBreitflanschträger, die ineinander und dicht an dicht gestapeltwerden sollen.
K19 Inner beam clampsLifting clamps type K 19 as inward grabbing lifting clamp forwide flange beams, which are to be stacked inside one anotherand close together.
V
H
A
Tragfähigkeit in kgLoad capacity in kg
500100015003000
Typ Bestell-Nr.Type Part No.
NG-K19005012NG-K19010016NG-K19015018NG-K19030022
ca. Maße in mm / Dimensions approx. (mm)A
100 - 120120 - 160140 - 180180 - 220
H
220280300350
V
60707585
35816
Eig.-Gew. ca. kgWeight approx. kg
12 INFO | NORDGREIF.COM
HebeklemmenLifting Clamps
K18 Sicherheitshebeklemmen für BlechpaketeTragklemme für den horizontalen Transport von Blechen undBlechpaketen. Mit einem Steckbolzen lässt sich der Greifbe-reich schnell von 0 - 420 mm verstellen. Der jeweilige Klemm-bereich beträgt 60 mm. Diese Hebeklemmen sind für denpaarweisen Einsatz vorgesehen. Der zulässige seitlicheSchrägzug beträgt max. 10°. Die Tragkraft muss entsprechenddem Neigungswinkel reduziert werden (s. Tabelle Seite 18).
K18 Safety clamps for sheet boardsBearer clamps for horizontal transport of sheets andsheet boards. The grab range can quickly be adjustedfrom 0 - 420 mm using a locking pin. Each clamp rangeis 60 mm. These lifting clamps are equipped for use inpairs. The permitted lateral diagonal pull is max. 10°. The bearing force must be reduced in accordance withthe slope angle (see table page 18).
Tragfähigkeit in kg/PaarPair capacity (kg)
1000150030003000300060006000
Typ Bestell-Nr.Type Part No.
NG-K18010150NG-K18015300NG-K18030180NG-K18030300NG-K18030420NG-K18060180NG-K18060300
ca. Maße in mm / Dimensions approx. (mm)A
0 - 1500 - 3000 - 1800 - 3000 - 4200 - 1800 - 300
B
12152020203030
F
170180200200200230230
H
250400300420550350470
I
110110120120120120120
V
25253030303030
10121218151921
Eig.-Gew. ca. kg/Stk.Weight approx. kg/pce.
K17 Sicherheitshebeklemmen mit SchutzbelagTragklemme für den paarweisen Einsatz von Platten undBlechen mit empfindlicher Oberfläche. Die Andruckplatte ist miteinem Schutzbelag versehen.
K17 Safety clamps with protective coverBearer clamps for use in pairs of plates and sheets withsensitive surfaces. The pressure plate is equipped with aprotective cover.
Tragfähigkeit in kg/PaarPair capacity (kg)
250500
10002500
Typ Bestell-Nr.Type Part No.
NG-K17002030NG-K17005030NG-K17010040NG-K17025050
ca. Maße in mm / Dimensions approx. (mm)A
0 - 300 - 300 - 400 - 50
B
10121520
F
150160200220
H
100120160180
I
100100130130
V
17171725
35710
Eig.-Gew. ca. kg/Stk.Weight approx. kg/pce.
K20 Sicherheitshebeklemmen für Trägertransportund LagerungDie Träger-Sicherheitshebeklemme Typ K 20 eignet sich beson-ders für den horizontalen Transport und zum Aus- und Ein-lagern von Trägern. Sie ist in geöffneter und geschlossenerStellung verriegelbar.
K20 Safety clamps for beam transportand storageThe beam safety clamps type K 20 are particularly suitable forhorizontal beam transport and getting beams in and out ofstorage. It can be locked in open and closed position.
Tragf. in kgLoad capacity
kg
50010002500
Typ Bestell-Nr.Type Part No.
NG-K20005015NG-K20010025NG-K20025028
ca. Maße in mm / Dimensions approx. (mm)A
5 - 155 - 255 - 28
für Trägerbreitenfor beam wide
80 - 160100 - 220200 - 380
B
506070
F
130175220
H
200300400
I
426075
V
607085
5718
Eig.-Gew. ca. kgWeight approx. kg
K21 Sicherheitshebeklemmen für Träger und Profile mitkardanischer AufhängungTragklemme mit Sicherheitsarretierung und Federvorspannung. Durch diekardanische Aufhängung ist diese Hebe-klemme besonders für seitlichenSchrägzug geeignet. Die Aufhängung ist in alle Richtungen schwenkbar, wodurch eine allseitigeZugbelastung möglich ist. Dadurch ist dieser Typ besonders geeignet zumTransport von langen Trägern, Profilen und Stahlkonstruktionen. Beiseitlicher Querbelastung reduziert sich die Tragfähigkeit gemäß Skizze. Beilängeren Stahlbauelementen: paarweiser Einsatz im Zweistangengehängeohne Spreiztraverse möglich.
K21 Safety clamps for beams and profileswith gimballed attachmentBearer clamp with safety lock and spring tensioning. This lifting clamp is particularly suitable for lateral diagonal pull because ofthe gimballed attachment. The attachment can be moved in all directions, sotensile loading is possible from all sides. As a result, this type is particularlysuitable for transporting long beams, profiles and steel constructions. For lateral shunt loading the load capacity is reduced as per the sketch.Paired use in the two-bar attachment is possible without spreader liftingbeam for longer structural steel elements.
Tragfähigkeit in kgLoad capacity in kg
10002500350045006000
Typ Bestell-Nr.Type Part No.
NG-K21010020NG-K21025030NG-K21035035NG-K21045040NG-K21060050
ca. Maße in mm / Dimensions approx. (mm)A
5 - 205 - 3010 - 3510 - 4015 - 50
B
65808595105
F
195230260320380
H
300350390450480
I
85105110120130
V
708585100100
815313740
Eig.-Gew. ca. kgWeight approx. kg
13INFO | NORDGREIF.COM
HebeklemmenLifting Clamps
K22 Sicherheitshebeklemmen für Bleche, Profileund RohreUniversalhebeklemme für den horizontalen Transport vonProfilen, Platten, Blechen und Rohren. Für die stirnseitige Auf-nahme von Trägern ist das Gehäuse geschlitzt. Mit Sicherheit-sarretierung; in geöffneter und geschlossener Stellungverriegelbar. Bei paarweiser Verwendung ist ein max. Neigungswinkel von 60° zulässig. Bei Verringerung derTraglast: s. Tabelle Seite 18.
K22 Safety clamps for sheets, profiles and pipesUniversal lifting clamps for horizontal transport of sheets,plates and profiles. The housing is slit for frontal suspension ofbeams. With safety lock - can be locked in open and closed po-sition. The slope angle may only be up to max. 60° for paireduse. See table on page 18 to reduce the bearing load.
Tragfähigkeit in kgLoad capacity in kg
5001000150030004000
Typ Bestell-Nr.Type Part No.
NG-K22005025NG-K22010025NG-K22015030NG-K22030040NG-K22045040
ca. Maße in mm / Dimensions approx. (mm)A
0 - 250 - 250 - 300 - 400 - 40
B
5050607075
F
155190210230260
H
180200260300330
I
60608090100
V
6060758595
78101518
Eig.-Gew. ca. kgWeight approx. kg
K23 Sicherheitshebeklemmen für Platten, Bleche und ProfileHebeklemme für den horizontalen Transport von Blechen, Platten und Profilen. Ausführung mit Sicherheitsarretierung.Durch die Federvorspannung wird die Greifnocke an das Blechgedrückt. Dadurch ist - auch bei Zugentlastung oder beim Auf-setzen - ein sicheres Greifen gewährleistet. Bei paarweisemEinsatz ist der Neigungswinkel nur bis 60° zulässig.
K23 Safety clamps for plates, sheets and profiles
Lifting clamps for horizontal transport of sheets, plates andprofiles. Designed with safety lock. The grab cams are pressedagainst the sheet using spring tensioning. This guarantees asecure grip even in the event of stress relief or hitting theground. The slope angle may only be up to 60° for paired use.
Tragfähigkeit in kgLoad capacity in kg
50010001500200030004000
Typ Bestell-Nr.Type Part No.
NG-K23005020NG-K23010025NG-K23015035NG-K23020040NG-K23030045NG-K23040050
ca. Maße in mm / Dimensions approx. (mm)A
0 - 200 - 255 - 350 - 405 - 4510 - 50
B
101020253050
F
160170190220240240
H
180190230290330360
I
758095110120120
V
606075758080
8913121524
Eig.-Gew. ca. kgWeight approx. kg
14 INFO | NORDGREIF.COM
HebeklemmenLifting Clamps
K26 SchraubklemmenUniversal-Schraubklemme zum Heben, Wenden um 180° und Ziehen vonBlechen, Trägern und Stahlkonstruktionen. Ausgestattet mit schwenkbarer,balliger Druckplatte - dadurch hohe Klemmung durch Keilwirkung.
K26 Screw ClampsUniversal screw clamps for lifting, turning by 180° and pulling sheets,beams and steel constructions. Equipped with movable, round pressureplates - result is good clamping through wedge effect.
K27 SchraubklemmenSchraubklemme mit seitlich schwenkbarer Aufhängeöse. Ausführung wieTyp K26; besonders geeignet für das Walzen von Blechen an Rundbiege-maschinen.
K27 Screw ClampsScrew clamps with lateral movable suspension eyes. Designed like typeK26; particularly suitable for rolling sheets on rounding machines.
Tragfähigkeit in kgLoad capacity in kg
500100015002000300050006000
Typ Bestell-Nr.Type Part No.
NG-K26005019NG-K26010030NG-K26015035NG-K26020100NG-K26030050NG-K26050080NG-K26060065
ca. Maße in mm / Dimensions approx. (mm)A
0 - 190 - 300 - 350 - 1000 - 500 - 800 - 65
B
505565707590100
F
170200250400350400380
H
240260350380380450490
I
60607080100110120
V
60606070707580
4581382023
Eig.-Gew. ca. kgWeight approx. kg
Tragfähigkeit in kgLoad capacity in kg
1000150030006000
Typ Bestell-Nr.Type Part No.
NG-K27010030NG-K27015035NG-K27030050NG-K27060065
ca. Maße in mm / Dimensions approx. (mm)A
0 - 300 - 350 - 500 - 65
B
556575100
F
200250350380
H
300400450550
I
6070100120
V
60607080
710925
Eig.-Gew. ca. kgWeight approx. kg
K24 Sicherheitshebeklemmen für Spundbohlenmit FernentriegelungDie Sicherheitshebeklemme für Spundbohlen ist geeignet,Spundbohlen um 90° zu wenden. Sie hat eine Fernentrie-gelung, womit die Hebeklemme vom Fußboden aus mittelsSeilzug in großer Höhe entriegelt werden kann.
K24 Safety clamps for sheet piles withremote unlockingThe safety clamps for sheet piles are suitable for turningsheet piles by 90°. It has remote unlocking, whereby thelifting clamps can be unlocked from the floor using a cablewinch at big heights.
Tragfähigkeit in kgLoad capacity in kg
25005000
Typ Bestell-Nr.Type Part No.
NG-K24025012NG-K24050020
ca. Maße in mm / Dimensions approx. (mm)A
1 - 121 - 20
B
6585
F
200250
H
350500
I
120155
V
85100
1118
Eig.-Gew. ca. kgWeight approx. kg
15INFO | NORDGREIF.COM
HebeklemmenLifting Clamps
K28 BetonrohrgehängeDas 3-Strang-Betonrohrgehänge eignet sich für denvertikalen Transport von Betonringen.
Der Greifbereich ist über Steckbolzen voreinstellbar.
K28 Concrete pipe attachmentThe 3-leg concrete pipe attachment is suitable for verticaltransport of concrete rings.
The grab range can be pre-adjusted using locking pins.
Tragfähigkeit in kgLoad capacity in kg
150030003000
Typ Bestell-Nr.Type Part No.
NG-K28015120NG-K28030180NG-K28030220
ca. Maße in mm / Dimensions approx. (mm)A max.
120180220
B
170260260
Greifweite / Grab range
40 - 12050 - 18090 - 220
406075
Eig.-Gew. ca. kgWeight approx. kg
HebeklemmenLifting Clamps
16 INFO | NORDGREIF.COM
Trägerklemme mit Fahrwerk Typ TFTrägerklemmen mit Fahrwerk von 1.000 bis10.000 kg und fu r Trägerbreiten zwischen 64und 300 mm einsetzbar. Ideal fur Montage- undReparaturarbeiten, problemlos anzubringenund wieder zu entfernen. Geringes Eigen-gewicht, Laufrollen mit Präzisionskugellager.
Beam Clamp with Chassis Type TFSix models are available in load capacities from1,000 to 10,000 kg and for beam flange widthsbetween 64 and 300 mm. Ideal for assemblyand repair work, easy to attach and remove.Low deadweight, wheels with precision ball bearings.
Technische Änderungen vorbehalten. Subject to change without notice
Trägerklemme Typ TDer einfache und sichere Anschlagpunkt.Trägerklemmen mit veränderlichem Klemm-bereich sind ohne Montagewerkzeuge oder Hilfsmittel schnell und einfach an Trägeranzubringen. Mittels der Spannspindel werdendie Klemmbacken an den Träger gepreßt unddamit ist der Aufhängepunkt fur Hebezeuge,Umlenkrollen u.a. gegeben. Aber auch schweranzuschlagende Konstruktionen oder Sektionensind sicher und schnell mit diesen Klemmen zufassen.
Beam Clamp Type TThe simple and safe attachment point. Beamclamps with adjustable flange width can be attached quickly and easily without mountingtools or auxiliary material. The jaws arepressed on the beam by a clamping spindleand thus provide a suspension point for liftinggear, pulleys etc. Even heavy constructions orsections that are otherwise difficult to grabcan be quickly and easily moved with theseclamps.
Tragf. in kgLoad capacity
in kg
10001500200030006000
10000
TypType
TF 1TF 1,5TF 2TF 3TF 6TF 10
Greifbereich A in mmFlange width A in mm
64 - 19064 - 19064 - 19064 - 190200 - 300200 - 300
Gewicht in kg/Stk.Weight in kg/pce
889325349
B
160160160315365260
C
225-250240-265235-260295-340295-380330-370
D
556065657075
E
455050557580
Abmessungen in mmDimensions approx. in mm
Typ Bestell-Nr.Type Part No.
NG-72150010NG-72150015NG-72150020NG-72150030NG-72150060NG-72150100
Technische Änderungen vorbehalten. Subject to change without notice
Tragf. in kgLoad capacity
in kg
20003000400050006000
1000015000
TypType
T 2T 3T 4T 5T 6T 10T 15
Greifbereich A in mmFlange width A in mm
64 - 19064 - 190150 - 300150 - 300200 - 300200 - 300200 - 300
Gewicht in kg/Stk.Weight in kg/pce
561418213865
B
130140195195195195240
C
180-220180-220240-295270-310375-400500-520540-560
D
607079858585110
E
50556575758095
Abmessungen in mmDimensions approx. in mm
Typ Bestell-Nr.Type Part No.
NG-72160020NG-72160030NG-72160040NG-7216A050NG-72160060NG-7216A030NG-72160150
TrägerklemmenBeam Clamps
17INFO | NORDGREIF.COM
W
V
H
I
A
B
Tragf. in kgLoad capacity
in kg
350035005000
A
650-500800-550650-500
B
1015-11651075-13001015-1165
H
750-430975-550750-430
I
260-315220-315260-315
V
160160160
W
808080
Abmessungen in mmDimensions in mm
Gewicht in kg/Stk.Weight in kg/pce.
120150130
Typ Bestell-Nr.Type Part No.
NG-DCIZ035650NG-DCIZ035800NG-DCIZ0056505
Drahtcoilinnenzangen, 3-armigin verdrehsteifer Ausführung über ein geführtes Zentralrohrmit Schrittschaltwerk und auswechselbaren Greifpallen
Wire Coil Internal Grab, 3-armTorsion-free construction with guided central tube. Equippedwith step mechanism and exchangeable grab jaws.
Drahtcoilinnenzangen, 2-armigin verdrehsteifer Ausführung über ein geführtes Zentralrohr mit Schrittschaltwerk und auswechselbarenGreifpallen
Wire Coil Internal Grab, 2-armTorsion-free construction with guided central tube. Equipped with step mechanism and exchangeable grabjaws.
Drahtcoilaußenzange
Wire Coil External Grab
Weitere Tragfähigkeiten und Abmessungen auf Anfrage möglich!
Other capacities and dimensions are available on request!
Bitte auf die vorhandenen Haspelhöhen achten !
Warning! Coil height must not be smaller than dimension I
Tragf. in kgLoad capacity
in kg
350035005000
A
650-500800-550630-550
B
1015-11651075-13001000-1200
H
750-430975-550
1190-1420
I
260-315220-315270-315
V
160160190
W
808090
Abmessungen in mmDimensions in mm
Gewicht in kg/Stk.Weight in kg/pce.
100120290
Typ Bestell-Nr.Type Part No.
NG-DCIZ002650NG-DCIZ002800NG-DCIZ205630
Tragf. in kgLoad capacity
in kg
3500
A
1250-850
B
1740-1360
H
1250-2200
I
350-430
V
150
W
75
Abmessungen in mmDimensions in mm
Gewicht in kg/Stk.Weight in kg/pce.
350
Typ Bestell-Nr.Type Part No.
NG-DCAZ301250
18 INFO | NORDGREIF.COM
DrahtcoilzangenWire Coil Tongs
Z51 RechteckprofilzangenDie Greifbacken der Rechteckprofilzangen sind mit einem weitgehend abriebfesten Schutzbelag versehen.Sie eignen sich besonders zum Transport von Gütern aus Stahl, Beton und Holz. Voraussetzung für ein ein-wandfreies Greifen ist jedoch, dass das Greifgut frei von Fett und Öl ist. Die Presskraft der Zangen ist so be-messen, dass der Reibfaktor zwischen Schutzbelag und Greifgut nicht kleiner als 0,75 µ betragen darf. Beiöligem Greifgut erbitten wir Ihre gesonderte Anfrage. Alle Rechteckprofilzangen sind mit einem Offenhalte-hebel ausgerüstet. Wir fertigen alle Zwischengrößen, auch mit höherer Tragfähigkeit und weiterem Greif-bereich. Bei öligem oder feuchtem Greifgut können die Greifbacken als Sonderleistung mit gehärtetenRosetten ausgerüstet werden.
Z51 Rectangular profile tongsThe grab jaws of the rectangular profile tongs are equipped with an extremely abrasion-proof protectivecover. They are particularly suitable for transporting goods made from steel, concrete and wood. However,the goods must be free from fat and oil to ensure trouble-free grabbing. The force of pressure of the tongsis calculated so that the friction factor between the protective cover and the foods may not be less than0.75. Please make a special request in the case of oily goods. All rectangular profile tongs are equippedwith an opening lever. We make all in-between sizes, also with higher load capacities and other grab ranges.The grab jaws can be equipped as a special design with hardened round anchor plates for oily or moistgoods.
Tragfähigkeit in kgLoad capacity in kg
250250
500500500
10001000100010001000
25002500250025002500
Typ Bestell-Nr.Type Part No.
NG-Z50002015NG-Z50002025
NG-Z50005020NG-Z50005035NG-Z50005050
NG-Z50010025NG-Z50010035NG-Z50010050NG-Z50010080NG-Z50010120
NG-Z50025025NG-Z50025035NG-Z50025050NG-Z50025080NG-Z50025120
ca. Maße in mm / Dimensions approx. (mm)A
40 - 15060 - 250
40 - 200100 - 350200 - 500
60 - 250100 - 350200 - 500300 - 800800 - 1200
60 - 250100 - 350200 - 500300 - 800800 - 1200
B
200250
300300400
300300400440500
330330400440600
F
400600
500700900
70080095014002400
700850100014002450
H
300 - 500400 - 800
350 - 700500 - 800600 - 900
450 - 700500 - 800600 - 900900 - 14001400 - 2400
500 - 800550 - 900650 - 1000900 - 14001400 - 2500
V
6565
757575
8080808080
9595959595
611
152535
283550130200
506072240360
Eig.-Gew. ca. kgWeight approx. (kg)
Tragfähigkeit in kgLoad capacity in kg
250250250250
500500500500
10001000100010001000
250025002500
Typ Bestell-Nr.Type Part No.
NG-Z51002006NG-Z51010012NG-Z51002026NG-Z51002050
NG-Z51005006NG-Z51005012NG-Z51005026NG-Z51005050
NG-Z51010012NG-Z51010026NG-Z51010050NG-Z51010075NG-Z51010100
NG-Z51025030NG-Z51025050NG-Z51025075
ca. Maße in mm / Dimensions approx. (mm)A
20 - 6050 - 125115 - 260250 - 500
20 - 6050 - 125115 - 260250 - 500
50 - 125150 - 260250 - 500480 - 750730 - 1000
150 - 300250 - 500480 - 750
B
370400560850
380400480850
50060085010001000
90011001100
C
75757575
75757575
100100100100100
120120120
H
300 - 360300 - 450380 - 650500 - 1000
300 - 360300 - 450380 - 670500 - 1000
360 - 500430 - 700500 - 1000500 - 1100600 - 1200
600 - 800700 - 1200700 - 1200
I
75757575
75757580
9090110110110
150150150
V
65656565
75757575
7580808080
959595
7101418
10121622
2328406070
7090110
Eig.-Gew. ca. kgWeight approx. (kg)
Z50 RundprofilzangenRundprofilzangen für den horizontalen Transport von Rundmaterialen aller Art, serienmäßig mit einem selbsttätigenOffenhaltehebel ausgerüstet. Gegen einen Mehrpreis sind alle Rundprofilzangen auch als Schalengreifer mit Schutz-belag für empfindliches Transportgut lieferbar. Alle Zangen sind als Sonderleistung mit Schrittschaltwerk erhältlich.Wir fertigen alle Zwischengrößen, auch mit höherer Traglast und veränderter Greifweite.
Z50 Round profile tongsRound profile tongs for horizontal transport of round materials of every kind, equipped as standard with anautomatic opening lever. At an extra charge all round profile tongs are available with a protective covering forsensitive transport goods. All tongs are available as a special design with step-by-step motion. We make all in-between sizes, even for higher loads and altered grab widths.
19INFO | NORDGREIF.COM
ZangenTongs
Z52 Zangen für Ballen und KistenZange für den Transport von gepressten Papier- oder Stoff-ballen, Kisten und Holzbohlen: Einfache robuste Scherenkon-struktion mit Offenhaltevorrichtung.
Z52 Tongs for bales and boxesTongs for transporting pressed paper or material bales, boxesand wooden planks. Simple robust pincer construction withopening lever.
Tragfähigkeit in kgLoad capacity in kg
250500500
10001000
Typ Bestell-Nr.Type Part No.
NG-Z52002050NG-Z52005050NG-Z52005065NG-Z52010100NG-Z52010120
ca. Maße in mm / Dimensions approx. (mm)A
250 - 500250 - 500300 - 650600 - 1000800 - 1200
B
808080110110
H
400 - 650400 - 650450 - 720700 - 950900 - 1050
I
150150180200220
V
6570708080
1215183845
Eig.-Gew. ca. kgWeight approx. (kg)
Z56 / Z57 LagerkastenzangenLagerkastenzangen zur Aufnahme von Lager-Stapelkästen. Typ Z 56 aussen und Typ Z 57 innen greifend. Der Greifvorgangerfolgt bei Typ Z 56 in der Kastensicke und bei Typ Z 57 unter-halb des Stulpwulstes. Damit sich beim Anstoßen oder Aufset-zen des Stapelkastens die Zange nicht öffnet, sind dieGreifarme über eine Zugfeder vorgespannt. Alle Zangen sindmit einem Offenhaltehebel versehen.
Z56 / Z57 Stock box tongsStock box tongs to lift warehouse stacking boxes. Type Z 56outward and type Z 57 inward grabbing. For type Z 56 grabbingoccurs on the box seam, for type Z 57 it is underneath the rein-forced seam. So that the tongs do not open when the stackingbox is jogged or hits the ground, the grab arms are tensionedwith a draw spring.
Tragfähigkeit in kgLoad capacity in kg
100100200200100100200200
Typ Bestell-Nr.Type Part No.
NG-Z56001030NG-Z56001045NG-Z56002030NG-Z56002045NG-Z57001030NG-Z57001045NG-Z57002030NG-Z57002045
ca. Maße inmm/ Dimensionsapprox. (mm)Greifweite in mmGreifweite in mm
300450300450300450300450
A
380530380530320470320470
H
320320320320320320320320
V
6565656565656565
66668888
Eig.-Gew. ca. kgWeight approx. (kg)
20 INFO | NORDGREIF.COM
ZangenTongs
Z60 Schienenzangen
Schienenzange für den Transport von Vignolschienen der TypeS und UIC sowie Kranschienen der Type A, besonders stabileAusführung mit Offenhaltevorrichtung, kombiniert mit Sperr-klinke, d.h. im Greifzustand kann sich die Zange trotz Zugent-lastung oder Aufsetzen der Schienen auf dem Boden nichtöffnen.
Z60 Rail tongs
Rail tongs for transporting Vignoles rails type S and UICand crane rails, very stable design with opening lever, com-bined with defensive latch, i.e. the rail tongs cannot open onthe ground in the grab state despite stress relief or hitting theground.
Hinweis/Note:Z60-10-08 für: S24 - S64, UCI50 - UCI60, A45 - A64Z60-20-08 für: S24 - S64, UCI50 - UCI60, A45 - A55
Tragfähigkeit in kgLoad capacity in kg
10002000
Typ Bestell-Nr.Type Part No.
NG-Z60010008NG-Z60020008
ca. Maße in mm / Dimensions approx. (mm)A
45 - 7545 - 75
B
420420
C
10 - 4010 - 31
H
440440
I
20 - 5520 - 55
V
9076
1618
Eig.-Gew. ca. kgWeight approx. (kg)
Z58 WendezangenDiese Wendezange eignet sich zum Aufrichten, Wenden oderDrehen von Transportgütern. Es ist eine Parallelogrammzange,deren Greifbacken sich parallel öffnen und schließen. Die Greif-backen sind drehbar gelagert und mit 90° -Einrastung versehenzur optimalen Anpassung an das Greifgut. Diese Wendezangeist mit einem Offenhaltehebel ausgerüstet.
Z58 Turning tongsThese turning tongs are suitable for straightening, turning or ro-tating transport goods. These are parallelogram tongs; the grabjaws open and close in parallel. The grab jaws can be rotated andwith 90° locking they enable perfect adjustment to the goods.These turning tongs are equipped with an opening lever.
Tragfähigkeit in kgLoad capacity in kg
125125250250500500
10001000
Typ Bestell-Nr.Type Part No.
NG-Z58001025NG-Z58001035NG-Z58002030NG-Z58002045NG-Z58005045NG-Z58005060NG-Z58010060NG-Z58010080
ca. Maße in mm / Dimensions approx. (mm)A
150 - 250250 - 350150 - 300300 - 450300 - 450450 - 600450 - 600650 - 800
B
600600700700720720800800
H
500 - 900550 - 950600 - 1050650 - 1100700 - 1150800 - 1250850 - 1300950 - 1500
I
250300300350350400430550
V
6060606070708585
353842457545100200
Eig.-Gew. ca. kgWeight approx. (kg)
21INFO | NORDGREIF.COM
ZangenTongs
Z61 KartonzangenParallelzange mit besonders großflächigen und schmalen Greif-backen mit Profilgummibelag, die große Druckverteilunggewährleisten. Besonders geeignet für sehr dicht nebeneinan-der stehende Pappkartons. Diese Zange verfügt über eine Of-fenhaltevorrichtung.
Z61 Cardboard tongsParallel tongs with extremely large and narrow grab jawswith rubber profile cover, which guarantees large pressuredistribution. Particularly suitable for cardboard boxes thatare very close together. These tongs have an opening lever.
Tragfähigkeit in kgLoad capacity in kg
125125125125125125125125
Typ Bestell-Nr.Type Part No.
NG-Z61001030NG-Z61001040NG-Z61001050NG-Z61001060NG-Z61001070NG-Z61001080NG-Z61001090NG-Z61001100
ca. Maße in mm / Dimensions approx. (mm)A
100 - 300200 - 400300 - 500400 - 600500 - 700600 - 800700 - 900800 - 1000
B
1515151515151515
F
700700700700700700700700
H
570 - 950570 - 950570 - 950570 - 950570 - 950570 - 950570 - 950570 - 950
I
125125125125125125125125
V
6060606060606060
1517181920202223
Eig.-Gew. ca. kgWeight approx. (kg)
Z62 HolzstammzangenZange mit großer Greifweite und geringen Außenabmessungenfür den Transport von Holzstämmen. Ab einer Tragfähigkeit von2500 kg sind die Greifspitzen auswechselbar. Ausführung mitOffenhaltevorrichtung.
Z62 Log tongsTongs with large grab width and low outer dimensions fortransporting logs. The grab points can be changed from aload capacity of 2,500 kg. Designed with opening lever.
Tragfähigkeit in kgLoad capacity in kg
5001000250025005000
Typ Bestell-Nr.Type Part No.
NG-Z62005050NG-Z62010080NG-Z62025080NG-Z62025100NG-Z62050100
ca. Maße in mm / Dimensions approx. (mm)A
200 - 500300 - 800300 - 800400 - 1000500 - 1000
B
6501100115014001500
H
500 - 700750 - 900750 - 900900 - 1200900 - 1200
V
8585959595
12236085130
Eig.-Gew. ca. kgWeight approx. (kg)
22 INFO | NORDGREIF.COM
ZangenTongs
Z65 Profilzangen für SteinblöckeVerstellbare Profilzange mit sehr großem Spannbereich. Diejeweils gewünschte Greifweite und Schwerpunktlage sind überSteckbolzen schnell einstellbar. Geringe Bauhöhe. Ausführungmit Offenhaltehebel. Die Greifbacken sind mit einem Schutzbe-lag ausgestattet.
Z65 Profile tongs for stone blocksAdjustable profile tongs with very large span range. The de-sired grab widths and centres of gravity are quickly adjustedusing locking pins. Low construction height. Designed withopening lever. The grab jaws are equipped with a protectivecover.
Tragfähigkeit in kgLoad capacity in kg
250250500500
1000
Typ Bestell-Nr.Type Part No.
NG-Z65002065NG-Z65002080NG-Z65005100NG-Z65005080NG-Z65010100
ca. Maße in mm / Dimensions approx. (mm)A
200 - 650200 - 800200 - 800200 -1000200 -1000
B
9001050105012501300
H
600600600700700
I
150150175175200
V
6060707080
2528354065
Eig.-Gew. ca. kgWeight approx. (kg)
Tragfähigkeit in kgLoad capacity in kg
100010002500250050005000
Typ Bestell-Nr.Type Part No.
NG-Z67010015NG-Z67010030NG-Z67025030NG-Z67025015NG-Z67050015NG-Z67050030
ca. Maße in mm / Dimensions approx. (mm)A
80 - 15080 - 30080 - 150100 - 300100 - 150100 - 300
B
300 x 200500 x 200320 x 240410 x 250320 x 260410 x 260
152022353550
Eig.-Gew. ca. kgWeight approx. (kg)H
500750600800700900
I
404040405050
V
8585115115135135
Z67 TrägerzangenTrägerzange zum Transport von Doppelflanschprofilen. Beson-ders robuste Ausführung mit selbsttätig einrastendem Offen-haltehebel.
Z67 Beam TongsBeam Tong for transport double flange profiles. Very heavy design with a self-acting snap opening lever.
23INFO | NORDGREIF.COM
ZangenTongs
Z59 FasszangenFasszange für stehende Stahlfässer. Dies ist eine einfache robuste Zangezum Greifen unter den Fassrand. Ausführung mit Offenhaltehebel.
Z59 Drum tongsDrum tongs for vertical steel drums. This is a simple, robust tong forgrabbing under the drum edge. Designed with opening lever.
Z63 Fasszangen für liegende FässerZange für Rollen-Sickenfässer nach DIN 66 43 und 66 35, die über einegeringe Bauhöhe und selbsttätig einrastendem Offenhaltehebel verfügt.
Z63 Drum tongs for horizontal drumsTongs for roll channel drums in accordance with DIN 66 43 and 66 35,which have a low construction height and automatically locking openinglever.
Tragfähigkeit in kgLoad capacity in kg
250250500500
Typ Bestell-Nr.Type Part No.
NG-Z59002056NG-Z59002064NG-Z59005056NG-Z59005064
ca. Maße in mm / Dimensions approx. (mm)A
470 - 560560 - 640470 - 560560 - 640
B
700800700800
H
400 - 480430 - 530400 - 500430 - 530
I
50505050
V
60608080
10121215
Eig.-Gew. ca. kgWeight approx. kg
Tragfähigkeit in kgLoad capacity in kg
250500
Typ Bestell-Nr.Type Part No.
NG-Z63002091NG-Z63005091
ca. Maße in mm / Dimensions approx. (mm)A
760 - 910760 - 910
H
400 - 500400 - 500
I
3030
V
6070
1012
Eig.-Gew. ca. kgWeight approx. kg
24 INFO | NORDGREIF.COM
FasshandlingDrum Handling
Fassgeschirr (FHZ) zum Aufrichten, Transportieren und Kippen von Stahlfässern
Drum gear (FHZ) to straighten, transport and tip steel drums
*mit Öse 80 x 60 mm*with suspension eye 80 x 60 mm
Fasszwinge (Z66) zum vertikalen Heben
Drum collars (Z66) for vertical lifting
TypType
Z66*Z66*
Tragfähigkeit in kgLoad capacity in kg
500800
25INFO | NORDGREIF.COM
FasshandlingDrum Handling
26 INFO | NORDGREIF.COM
C30 Coilhaken mit GegengewichtsausgleichStabile Stahlschweißkonstruktion aus hochwertigem Stahl für extremen Einsatz. Durch die konstruktiveAnordnung des Ausgleichsgewichtes verbleibt der Tragarm des Coilhakens sowohl im Leerzustand alsauch unter Last in der Waagerechten. Wir fertigen auch Zwischengrößen und Sonderausführungen.
C 30 Coil hooks with counterweight balanceStable welded steel construction of high quality steel for extreme use. The constructive alignment of thebalancing weight means the support plate remains horizontal both when empty and loaded.We also make in-between sizes and special designs.
Tragfähigkeit in tLoad capacity in t
0,50,50,50,5
1,01,01,01,0
2,52,52,52,5
5,05,05,05,0
7,57,57,57,5
10101010
15151515
20202020
252525
303030
Typ Bestell-Nr.Type Part No.
NG-C30005003NG-C30005005NG-C30005007NG-C30005010
NG-C30010003NG-C30010005NG-C30010007NG-C30010010
NG-C30025003NG-C30025005NG-C30025007NG-C30025010
NG-C30050007NG-C30050010NG-C30050012NG-C30050015
NG-C30075007NG-C30075010NG-C30075012NG-C30075015
NG-C30010007NG-C30010010NG-C30100012NG-C30100015
NG-C30150010NG-C30150012NG-C30150015NG-C30150020
NG-C30200010NG-C30200012NG-C30200015NG-C30200020
NG-C30250012NG-C30250015NG-C30250020
NG-C30300015NG-C30300017NG-C30300020
ca. Maße in mm / Dimensions approx. (mm)B
150 - 300250 - 500375 - 750500 - 1000
150 - 300250 - 500375 - 750500 - 1000
150 - 300250 - 500375 - 750500 - 1000
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
500 - 1000625 - 1250750 - 15001000 - 2000
500 - 1000625 - 1250750 - 15001000 - 2000
625 - 1250750 - 15001000 - 2000
750 - 1500875 - 17501000 - 2000
A
225375565750
225375565750
225375565750
5657509401125
5657509401125
5657509401125
75094011251500
75094011251500
94011251500
112513201500
C
60707580
7580100110
90110135140
160180200220
200230230250
230230270290
290290320350
300320330370
360360400
380400420
I
400400400400
450450450450
500500500500
550550550550
550550550550
600600650650
750750700700
850850800800
850850850
950950950
H
520520520520
600600600600
680680680680
780780780925
830830830830
910910960960
1120112010701070
1310131012601260
140014001400
155015501550
V x W
100 x 50100 x 50100 x 50100 x 50
120 x 55120 x 55120 x 55120 x 55
150 x 75150 x 75150 x 75150 x 75
190 x 90190 x 90190 x 90190 x 90
230 x 110230 x 110230 x 110230 x 110
250 x 120250 x 120250 x 120250 x 120
300 x 135300 x 135300 x 135300 x 135
380 x 180380 x 180380 X 180380 X 180
450 x 210450 x 210450 x 210
500 x 220 500 x 220 500 x 220
22304075
304570120
60110150170
230320350480
320380600670
270400570680
60078010001500
850100012501700
120015002000
190021002450
Eig.-Gew. ca. kgWeight approx. (kg)
C-HakenCoil Hooks
27INFO | NORDGREIF.COM
C31 Coilhaken mit KettenaufhängungTyp C31: Durch die Kettenaufhängung kann das Eigengewicht des C-Hakens gering gehalten werden.
C31 Coil hooks with chain attachmentType C31: : the net weight of the C hook can be kept down thanks to the chain attachment.
Tragfähigkeit in tLoad capacity in t
33
5555
8888
10101010
15151515
20202020
Typ Bestell-Nr.Type Part No.
NG-C31025007NG-C31025010
NG-C31050007NG-C31050010NG-C31050012NG-C31050015
NG-C31075007NG-C31075010NG-C31075012NG-C31075015
NG-C31100007NG-C31100010NG-C31100012NG-C31100015
NG-C31150020NG-C31150010NG-C31150012NG-C31150015
NG-C31200010NG-C31200012NG-C31200015NG-C31200020
ca. Maße in mm / Dimensions approx. (mm)B
375 - 750500 - 1000
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
500 - 1000625 - 1250750 - 15001000 - 2000
500 - 1000625 - 1250750 - 15001000 - 2000
A
565750
5657509401125
5657509401125
5657509401125
75094011251500
75094011251500
C
135140
160180200220
200230230250
230230270290
290290320350
300320330370
I
500500
550550550550
550550550550
600600650650
750750700700
850850800800
H
15001600
1500160017001900
1600160019002150
1700180019002200
2000210022002500
2100220025002700
V x W
135 x 75135 x 75
180 x 100180 x 100180 x 100180 x 100
200 x 110200 x 110200 x 110200 x 110
200 x 110200 x 110200 x 110200 x 110
300 x 160300 x 160300 x 160300 x 160
340 x 180340 x 180340 x 180340 x 180
75110
150200280350
200300400490
270400500680
60078010001500
850100012501700
Eig.-Gew. ca. kgWeight approx. (kg)
C-HakenCoil Hooks
28 INFO | NORDGREIF.COM
C32 Coilhaken mit FederschwerpunktausgleichTyp C32: Der automatische Federschwerpunktausgleich ermöglicht das Aufnehmen vonunterschiedlichen Coilgewichten bei gleichbleibender Schwerpunktlage.
C32 Coil hooks with spring centroidal balanceType C32: the automatic spring centroidal balance facilitates lifting of different coil weights without mov-ing the centre of gravity. the automatic spring centroidal balance facilitates lifting of different coil weightswithout moving the centre of gravity.
Tragfähigkeit in tLoad capacity in t
2,5
5,05,05,05,0
7,57,57,57,5
10101010
15151515
20202020
Typ Bestell-Nr.Type Part No.
NG-C32025010
NG-C32050007NG-C32050010NG-C32050012NG-C32050015
NG-C32075007NG-C32075010NG-C32075012NG-C32075015
NG-C32100007NG-C32100010NG-C32100012NG-C32100015
NG-C32150010NG-C32150012NG-C32150015NG-C32150020
NG-C32200010NG-C32200012NG-C32200015NG-C32200020
ca. Maße in mm / Dimensions approx. (mm)B
500 - 1000
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
375 - 750500 - 1000625 - 1250750 - 1500
500 - 1000625 - 1250750 - 15001000 - 2000
500 - 1000625 - 1250750 - 15001000 - 2000
A
750
5657509401125
5657509401125
5657509401125
75094011251500
75094011251500
C
140
160180200220
200230230250
230230270290
290290320350
300320330370
I
500
550550550550
550550550550
600600650650
750750700700
850850800800
H
1250
1250130013001400
1500155015501650
1500160016501700
1700175018001900
1900195020002100
V x W x X
175 x 75 x 35
175 x 75 x 40190 x 90 x 40190 x 90 x 40190 x 90 x 45
230 x 110 x 50230 x 110 x 50230 x 110 x 50230 x 110 x 55
250 x 120 x 55250 x 120 x 55250 x 120 x 60250 x 120 x 60
300 x 135 x 70300 x 135 x 70300 x 135 x 75300 x 135 x 75
380 x 180 x 80380 x 180 x 80380 x 180 x 85380 x 180 x 85
90
110125145160
135150200250
230250300380
400430550700
400500700950
Eig.-Gew. ca. kgWeight approx. (kg)
Typ C33 Coil-KipphakenGeeignet zum Kippen und Aufrichten von Stahlbandringen und Coils. Diese müssen gut bandagiert sein und auf Kanthölzern liegen. Sehr einfache Handhabung.
Type C 33 Tipping coil hooksSuitable for tipping and straightening steel band rings and coils. These must be well bound and be sitting on squared beams. Very simple handling.
Tragfähigkeit in tLoad capacity in t
0,51,01,02,52,53,04,05,0
Typ Bestell-Nr.Type Part No.
NG-C33005002NG-C33010022NG-C33010003NG-C33025002NG-C33025003NG-C33030003NG-C33040004NG-C33050005
ca. Maße in mm / Dimensions approx. (mm)A
100 - 200100 - 200200 - 300100 - 200200 - 300250 - 350250 - 400350 - 500
C
810101212152025
D
60707070708090100
I
400450500500500550600650
H
520600650680680730840900
V
100120120150150150190190
1012162025304050
Eig.-Gew. ca. kgWeight approx. (kg)
C-HakenCoil Hooks
29INFO | NORDGREIF.COM
Tragfähigkeit in kgLoad capacity in kg
1000100010001000
1600160016001600
2500250025002500
5000500050005000
6300630063006300
10000100001000010000
16000160001600016000
Typ Bestell-Nr.Type Part No.
NG-T20010001NG-T2001002NG-T2001003NG-T2001005
NG-T2001601NG-T2001602NG-T2001603NG-T2001605
NG-T2002502NG-T2002503NG-T2002505
NG-T2002506.3
NG-T2005002NG-T2005003NG-T2005005NG-T2005008
NG-T2006303NG-T2006304NG-T2006305
NG-T2006306.3
NG-T2010003NG-T2010005NG-T2010008NG-T2010010
NG-T2016003NG-T2016005NG-T2016008NG-T2016010
ca. Maße in mm / Dimensions approx. (mm)L
1000200030005000
1000200030005000
2000300050006300
2000300050008000
3000400050006300
30005000800010000
30005000800010000
n x k
2 x 1254 x 1254 x 2508 x 250
2 x 1254 x 1254 x 2508 x 250
4 x 1254 x 2508 x 25010 x 250
4 x 1254 x 2508 x 2506 x 500
4 x 2506 x 2507 x 25010 x 250
4 x 2504 x 5006 x 5007 x 500
4 x 2508 x 2506 x 5007 x 500
H
380380400400
400400430450
510510580600
630680760660
700730800820
890820800850
92095010501150
V
120120120120
130130130130
150150150150
190190190190
210210210210
250250250250
300300300300
W
55555555
60606060
75757575
9090190190
95959595
120120120120
135135135135
203050120
254060200
6390210250
75135325800
180230420500
22058012001800
4006008002400
Eig.-Gew. ca. kgWeight approx. (kg)
T20 Traversen, starrTraverse mit schwenkbaren Sicherheitsösenhaken. DieseTraverse ist eine robuste Trägerkonstruktion. Einstufung undBerechnung erfolgen nach DIN EN 13155.
Die Stahlschweißkonstruktion wird ausschließlich vongeprüften Schweißern ausgeführt. Die nachstehende Tabellezeigt unsere Standardbaupalette.
T20 Lifting beams, rigidLifting beam with rotatable security eye hooks. This liftingbeam is a robust load construction. Grading and calculation areeffected in accordance with DIN EN 13155.
The welded steel construction is exclusively made using in-spected welds. The adjacent table shows our standard range.
TraversenLifting Beams
T21 Traversen, verstellbar
Ausführung mit zwei Verstellbügeln und Sicherheitsösenhaken.Traversenaufhängung für Einfachhaken. Weitere Tragfähigkeitenund Größen auf Anfrage.
T21 Lifting beams, adjustable
Designed with two adjustable stays and security eye hooks.Lifting beam attachment for single hooks. Further load capaci-ties and sizes on request.
Tragfähigkeit in kgLoad capacity in kg
1000100010001000
1600160016001600
2500250025002500
5000500050005000
6300630063006300
10000100001000010000
16000160001600016000
Typ Bestell-Nr.Type Part No.
NG-T2101001NG-T2101002NG-T2101003NG-T2101005
NG-T2101601NG-T2101602NG-T2101603NG-T2101005
NG-T2101605NG-T2102502NG-T2102503NG-T2102505
NG-T2102506.3NG-T2105002NG-T2105003NG-T2105005
NG-T2105008NG-T2106303NG-T2106304
NG-T2106306.3
NG-T2110003NG-T2110005NG-T2110008NG-T2110010
NG-T2116003NG-T2116005NG-T2116008NG-T2116010
ca. Maße in mm / Dimensions approx. (mm)L
1000 - 5002000 - 10003000 - 10005000 - 1000
1000 - 5002000 - 10003000 - 10005000 - 1000
2000 - 10003000 - 10005000 - 10006300 - 1300
2000 - 10003000 - 10005000 - 10008000 - 2000
3000 - 10004000 - 10005000 - 15006300 - 1300
3000 - 10005000 - 10008000 - 200010000 - 3000
3000 - 10005000 - 10008000 - 200010000 - 3000
n x k
2 x 1254 x 1254 x 2508 x 250
2 x 1254 x 1254 x 2508 x 250
4 x 1254 x 2508 x 25010 x 250
4 x 1254 x 2508 x 2506 x 500
4 x 2506 x 2507 x 25010 x 250
4 x 2504 x 5006 x 5007 x 500
4 x 2508 x 2506 x 5007 x 500
H
400400420450
420420450500
610610680700
730780860750
800890900920
1000950920980
1080110012001300
V
120120120120
130130130130
150150150150
190190190190
210210210210
250250250250
300300300300
W
55555555
60606060
75757575
9090190190
95959595
120120120120
135135135135
253860150
305075230
75110230280
100160360850
220260470560
28065013501950
5007209502650
Eig.-Gew. ca. kgWeight approx. (kg)
30 INFO | NORDGREIF.COM
TraversenLifting Beams
31INFO | NORDGREIF.COM
Tragf. in kgLoad capacity
(kg)
10002500250050005000500075007500
100001000015000
Typ Bestell-Nr.Type Part No.
NG-T2201021NG-T2202521NG-T2202532NG-T2205032NG-T2205042NG-T2205052NG-T2207552NG-T2207563NG-T2210042NG-T2210063NG-T2215063
ca. Maße in mm / Dimensions approx. (mm)Länge max
Length max.
2000 - 10002000 - 10003000 - 10003000 - 10004000 - 10005000 - 15005000 - 15006000 - 20004000 - 10006000 - 20006000 - 2000
Breite max.Width max.
1000 - 5001000 - 5002000 - 10002000 - 10002000 - 10002500 - 10002500 - 10003000 - 10002500 - 10003000 - 10003000 - 1000
H
60064071086088090011001150120012501450
9014023034045060068098077511501400
Eig.-Gew.ca. kgWeight
appr. (kg)
T23 Traversen für GitterboxenStarre Traverse mit vier Unterfasshaken. Ausführung mit einem beweglichen und einem starrenHakenpaar.
T23 Lifting beams for skeleton containersRigid lifting beams with four drum hooks. Designed with a mobile and a rigid hook pair.
Tragf. in kgLoad capacity
(kg)
100015003000
Typ Bestell-Nr.Type Part No.
NG-T23010108NG-T23015108NG-T23030108
Eig.-Gew.ca. kgWeight
appr. (kg)
404565
ca. Maße in mm / Dimensions approx. (mm)
B
600600600
H
360380450
I
150160160
L
120012001200
V
120120150
T25 GabelstaplerschuheEinfachaufsteckschuh mit Wirbelhaken für Gabelstapler. Maße A undB sind variierbar.
T25 Forklift shoesSingle attachment shoe with rotating hook for forklifts. DimensionsA and B are variable.
Tragfähigkeit in kgLoad capacity in kg
1000150020003000
Typ Bestell-Nr.Type Part No.
NG-T25010NG-T25015NG-T25020NG-T25030
ca. Maße in mm / Dimensions approx. (mm)A
120140160180
B
50606080
H
160180200220
56810
Eig.-Gew. ca. kgWeight approx. (kg)
T22 Auslegertraversen verstellbar Auslegertraversen verstellbar in Länge und Breite, mit beweglichemT22 Lifting beams adjustable Sicherheitshaken Typ T 22:
Lifting beams adjustable in length and width. Lifting beam with safety hook type T 22:
T24 GabelstaplertraversenDoppelaufstecktraverse mit Wirbelhaken für Gabelstapler. Robuste Ausführung mit geringerBauhöhe. Maße A, B und C können auch Ihren Wünschen entsprechend gefertigt werden.
T24 Forklift lifting beamsDouble attachment lifting beam with rotating hookfor forklifts. Rigid design with low clear-ance. Dimensions A, B and C can also be manufactured to your specifications.
Tragfähigkeit in kgLoad capacity in kg
1000150020003000
Typ Bestell-Nr.Type Part No.
NG-T24010NG-T24015NG-T24020NG-T24030
ca. Maße in mm / Dimensions approx. (mm)A
500500600600
B
120140160200
C
606080100
H
140160200200
10152030
Eig.-Gew. ca. kgWeight approx. (kg)
TraversenLifting Beams
TA Spreize starr mit SchaukelstückSpreize nicht verstellbar, mit fixer Greifweite. Die Ketten laufen durch dieSchaukelstücke an den Enden der Spreize. Diese bewirken eine Um-lenkung der Kraft. Die Spreize dient als nur Abstandshalter. Die Ketten gehören nicht zum Lieferumfang. Im Bedarfsfall das Kettenge-hänge gesondert anfragen.
TA Spreader Beams, fixed, with rocker Spreader beam fixed. The chains run-through the spreader beam and theforce will be causing a deflection with the rocker. The spreader beam isonly a distance piece.Chains not part of scope. In case of need, please ask for offer.
Tragf. in kg 90° Winkel
Load capacity (kg)90° Head angle
1400280045007100
11200
Kettenstärked in mm
Chain gauged(mm)
68101316
Maße in mmDimensions in mm
A
10001000 - 15001000 - 15001000 - 15001250 - 2500
Typ Bestell-Nr.Type Part No.
NG-TA06NG-TA08100NG-TA10100NG-TA13100NG-TA16125
TAV Spreize verstellbar mit SchaukelstückSpreize mit Verstellraster, für variable Greifweiten. Die Ketten laufen durchdie Schaukelstücke, die eine Umlenkung der Kraft bewirken. Die Spreizedient als nur Abstandshalter. Die Ketten gehören nicht zum Lieferumfang. Im Bedarfsfall das Kettenge-hänge gesondert anfragen.
TAV Spreader Beams, adjustable, with rockerSpreader beam, adjustable, for variable gripping width. The chains run-through the spreader beam and the force will be causing a deflection withthe rocker. The spreader beam is only a distance piece. Chains not part of scope. In case of need, please ask for offer.
Tragf. in kg 90° Winkel
Load capacity (kg)90° Head angle
1400280045007100
11200
Kettenstärked in mm
Chain gauged(mm)
68101316
Maße in mmDimensions in mm
A min - A max
1000 - 15001200 - 20001200 - 20001200 - 20001900 - 2500
Typ Bestell-Nr.Type Part No.
NG-TAV06NG-TAV08NG-TAV10NG-TAV13NG-TAV16
TB Spreize starr mit PendelstückSpreize nicht verstellbar, mit fixer Greifweite. Das Kettengehänge ist an derSpreize befestigt. Die Pendelstücke ermöglichen eine lösbare Anbindungdes Greifgutes an die Spreize. Die Ketten gehören nicht zum Lieferumfang.Im Bedarfsfall das Kettengehänge gesondert anfragen.
TB Spreader Beams, fixed, with pendular suspension lugsSpreader beam fixed length, with loadside pendular suspension lugs atboth ends. The crane side chain suspension must be connected to thespreader beam. Various slings, ropes or chains can be connected to theloadside pendular suspension lugs.All Chains not part of scope. In case of need, please ask for offer.
TBV Spreize verstellbar mit PendelstückSpreize mit Verstellraster, für variable Greifweiten. Das Kettengehänge istan der Spreize befestigt. Die Pendelstücke ermöglichen eine lösbare An-bindung des Greifgutes an die Spreize. Es können Rundschlingen, Seileoder Ketten angebaut werden. Die Spreize dient als nur Abstandshalter.
TBV Spreader Beams, adjustable with pendular suspen-sion lugsSpreader beam, adjustable, for variable gripping width, with loadsidependular suspension lugs at both ends. The crane side chain suspensionmust be connected to the spreader beam. The spreader beam is only adistance piece. Various slings, ropes or chains can be connected to theloadside pendular suspension lugs.Chains not part of scope. In case of need, please ask for offer.
Tragf. in kg 90° Winkel
Load capacity (kg)90° Head angle
1400280045007100
11200
Kettenstärked in mm
Chain gauged(mm)
68101316
Maße in mmDimensions in mm
A
10001000 - 15001000 - 15001000 - 15001250 - 2500
Typ Bestell-Nr.Type Part No.
NG-TB06100NG-TB08100NG-TB10100NG-TB13100NG-TB16125
Tragf. in kg 90° Winkel
Load capacity (kg)90° Head angle
1400280045007100
11200
Kettenstärked in mm
Chain gauged(mm)
68101316
Maße in mmDimensions in mm
A min - A max
1000 - 15001200 - 20001200 - 20001200 - 20001900 - 2500
Typ Bestell-Nr.Type Part No.
NG-TBV06NG-TBV08
NG-TBCV10NG-TBV13NG-TBV16
32 INFO | NORDGREIF.COM
Spreizen / SpreiztraversenSpreader Bars
33
Benötigtes Lastaufnahmemittel:
Bezeichnung der Last (Werkstoffangabe):
Gewicht (kg) min. max.
Länge (mm) min. max.
Breite (mm) min. max.
Höhe (mm) min. max.
Außendurchmesser (mm) min. max.
Innendurchmesser (mm) min. max.
Angaben zur Last
Angaben zum Hebezeug
Angaben zum Lastaufnahmemittel
Lastposition ❐ waagerecht Lastbewegung ❐ Heben waagerecht ❐ senkrecht ❐ um ° drehen
Lastoberfläche ❐ trocken - druckempfindlich ❐ trocken - druckunempfindlich ❐ feucht - druckempfindlich ❐ feucht - druckunempfindlich
Lastposition ❐ waagerecht Lastbewegung ❐ Heben waagerecht ❐ senkrecht ❐ um ° drehen
Lastoberfläche ❐ trocken - druckempfindlich ❐ trocken - druckunempfindlich ❐ feucht - druckempfindlich ❐ feucht - druckunempfindlich
Möglichkeit der ❐ durch Klemmen ❐ durch UmgreifenLastaufnahme
Kranhaken ❐ Einfachhaken Nr. ❐ Doppelhaken Nr. DIN 15041 DIN 15042
❐ Hallenkran Tragkraft t
❐ Portalkran Hubhöhe m
Betriebsart ❐ mit Sperrhebel ❐ mit Schrittschaltwerk
Abmessungen für Breite F max. mm Innere Höhe I max. mmBild 1 und Bild 2 Bauhöhe H max. mm Greifbacke C x C mm
Breite F max. mm
Aufhängekopf Höhe V max. mm Breite B max. mm
Art desvorhandenen Kranes
Art desvorhandenen Kranes
Empfänger:
Nordgreif GmbH
Tel: +49 (0) 40 / 73 60 74-0Fax: +49 (0) 40 / 73 60 74-22Email: [email protected]
Absender:
Ansprechperson:Tel.: Fax:Email:
33INFO | NORDGREIF.COM
FAX ANFRAGEFORMULAR ZANGEN
Haupttraverse
Quertraverse
Traversen Aufhängungen Traversen AbhängungenTraversen Aufhängungen Traversen Abhängungen
Typ 1 ❏
Typ 4❏ Typ 5❏ Typ 6❏
Typ 2 ❏ Typ 3 ❏ Typ 1 ❏
Typ 4❏ Typ 5❏ Typ 6❏
Typ 2 ❏ Typ 3 ❏
Tragfähigkeit kg
Raster Anz. mm(RL Anz. x mm)L min mm
L max mm
Raster Anz. mm(RB Anz. x mm)B min mm
B max mm
Aufhängekopf
Sonstige Angaben
SonstigeAnforderungen
Höhe H max. mm Breite B max. mm Kranhaken-Nr.:
H1 = max. Höhe Haupttraverse mm
H2 = Gesamthöhe mm
Tragfähigkeit
RL Lmin.
Lmax.
H1
H2
RBBmin.
Bmax.B
H
Empfänger:
Nordgreif GmbH
Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]
Absender:
Ansprechperson:Tel.: Fax:Email:
FAX ANFRAGEFORMULAR TRAVERSEN
34 INFO | NORDGREIF.COM
FAX ANFRAGEFORMULAR C-HAKEN
Typ 1 ❏
C-Haken Varianten
C-HakenHauptabmessungen
Tragfähigkeit
RM = Rastermaß
A = Auflagefläche
AB = Auflagebreite
B = Coillänge
I = Coilinnenhöhe
Aufhängekopf
H1 = max. Höhedes C-Haken
Z = Zinkenbreite
Einsatzgebiet
SonstigeAnforderungen
mm C = Zinkenhöhe mm
mm
kg
Anzahl
mm
mm
mm
mm
mm Abstand
Typ 4 ❏ Typ 5 ❏ Typ 6 ❏
Typ 2 ❏ Typ 3 ❏
C
B
H
H1
AB
A
I
Empfänger:
Nordgreif GmbH
Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]
Absender:
Ansprechperson:Tel.: Fax:Email:
Höhe H max. mm Breite B max. mm Kranhaken-Nr.:
35INFO | NORDGREIF.COM
36
Required load suspension equipment:
Description of the load (indicate material):
Weight (kg) min. max.
Length (mm) min. max.
Width (mm) min. max.
Height (mm) min. max.
Outside diameter (mm) min. max.
Inside diameter (mm) min. max.
Information on Load
Information on Lifting Gear
Information on Load Suspension Devices
Load position ❐ horizontal load movement ❐ lifting horizontal ❐ vertical ❐ ° rotation
Load surface ❐ dry – pressure sensitive ❐ dry – not pressure sensitive ❐ wet – pressure sensitive ❐ wet – not pressure sensitive
Option of ❐ by clamping ❐ by wrap-aroundload pick-up
Crane hook ❐ simple hook no. ❐ double hook no. DIN 15041 DIN 15042
❐ overhead crane load capacity t
❐ portal crane lifting height m
Operating mode ❐ with ratchet lever ❐ with automatic step mechanism
Dimensions for width F max. mm internal height I max. mmfig. 1 and fig. 2 structural height H max. mm jaw C x C mm
Width F max. mm
Suspension eye height V max. mm width B max. mm
Typeof existingcrane
To:
Nordgreif GmbH
Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]
Sender:
Contact person:Tel.: Fax:e-mail:
FAX ENQUIRY FORM TONGS
36 INFO | NORDGREIF.COM
FAX ENQUIRY FORM LIFTING BEAMS
Main beam
Cross beam
Traversen Aufhängungen Traversen AbhängungenLifting eye types Hook types
Type 1 ❏
Type 4❏ Type 5❏ Type 6❏
Type 2 ❏ Type 3 ❏ Type 1 ❏
Type 4❏ Type 5❏ Type 6❏
Type 2 ❏ Type 3 ❏
Load capacity kg
Grid n° mm(RL n° x mm)L min mm
L max mm
Grid n° mm(RB n° x mm)B min mm
B max mm
Lifting eye
Other Information
Other Requirements
Height H max. mm Width B max. mm Hook-no:
H1 = max. height main lifting beam mm
H2 = overall height mm
To:
Nordgreif GmbH
Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]
Sender:
Contact person:Tel.: Fax:e-mail:
Main Beam
Cross Beam
37INFO | NORDGREIF.COM
Tragfähigkeit
RL Lmin.
Lmax.
H1
H2
RBBmin.
Bmax.B
H
Load capacity
Type 1 ❏
C-hook types
C-hooks dimensionsMain dimensions
Load capacity
RM = grid dimensions
A = supporting surface
AB = supporting width
B = coil length
I = coil inside height
Lifting eye
H1 = max. heightof the C-hook
Z = prong width
Area of Application
Other requirements
mm C = prong height mm
mm
kg
number
mm
mm
mm
mm
mm spacing
Type 4 ❏ Type 5 ❏ Type 6 ❏
Type 2 ❏ Type 3 ❏
C
B
H
H1
AB
A
I
To:
Nordgreif GmbH
Tel: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22Email: [email protected]
Sender:
Contact person:Tel.: Fax:e-mail:
Height H max. mm Width B max. mm C-hook-no.:
FAX ENQUIRY FORM COIL HOOKS
38 INFO | NORDGREIF.COM
39INFO | NORDGREIF.COM
Für Sonderlastaufnahmemittel:
For special load handling devices:
NORDGREIFTechnik für die Praxis,Sicherheit für den Mensch.
Sollten Sie in diesem Katalog NICHT das passende Standardlastaufnahmemittel gefunden haben,schauen Sie bitte auf unsere Homepage, bestellen Sie unseren Sonderlastaufnahmemittel-Katalogoder nehmen Sie persönlich Kontakt auf.
If you do not find the appropriate standard LOAD HANDLING DEVICE please visit our website, orcontact us directly.
Infoline: +49 (0) 40 / 73 60 74 0Fax: +49 (0) 40 / 73 60 74 22E-Mail: [email protected]: www.nordgreif.com
Mechanische Zange zum Greifen von Pipeline-Rohren unter Wasser.
Mechnical tong for submarine pipeline tubes.
Nordgreif GmbH
Achter de Weiden 12D-22869 Schenefeld / HamburgGermany
Telefon: +49 (0) 40 / 73 60 74 0Telefax: +49 (0) 40 / 73 60 74 22
Email: [email protected]: www.nordgreif.com
© Copyright by Nordgreif GmbH 2013
Es gelten unsere aktuellen Verkaufs-, Lieferungs- und Zahlungsbedingungen.
Bei Bedarf bitte anfordern.
Änderungen vorbehalten.Nachdruck dieses Prospektes, auch auszugsweise, ist untersagt.
© Copyright by Nordgreif GmbH 2013. Our current Terms and Conditions ofSale, Delivery and Payment apply.
Please request as needed.
All rights reserved. It is forbiddento reprint this brochure includingextracts.