STANDARD EQUIPMENT OPTIONAL EQUIPMENT · Long crawler lower frame Dozer blade Tool kit Rearview...
Transcript of STANDARD EQUIPMENT OPTIONAL EQUIPMENT · Long crawler lower frame Dozer blade Tool kit Rearview...
ISO Standard cabin All-weather steel cab with 360O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(LH) Lockable door Hot & cool box Storage compartment & Ashtray Transparent cabin roof-cover Radio / USB player Handsfree mobile phone system with USB 12 volt power outlet (24V DC to 12V DC converter) Sun visor Computer aided power optimization (New CAPO) system 3-power mode, 2-work mode, User mode Auto deceleration & one-touch deceleration system Auto warm-up system Auto overheat prevention system Automatic climate control Air conditioner & heater Defroster Self-diagnostics system Starting Aid (air grid heater) for cold weather Centralized monitoring LCD display Engine speed or Trip meter/Accel. Clock Gauges Fuel level gauge Engine coolant temperature gauge Hyd. oil temperature gauge Warnings Check engine Communication error Low battery Air cleaner clogging Indicators Max Power Fuel warmer Auto idle Door and cab locks, one key Two outside rearview mirrors Mechanical suspension seat with heater Four front working lights Electric horn Batteries (2 x 12V x 72 AH) Battery master switch Removable clean-out screen for cooler Automatic swing brake Removable reservoir tank Fuel pre-filter with fuel warmer Boom holding system Arm holding system Track shoes (500mm, 20”) Track rail guard Accumulator for lowering work equipment Electric transducer Lower frame under cover (Normal) Cabin Rops (ISO 12117-2) ROPS (Roll Over Protective Structure)
STANDARD EQUIPMENT Fuel filler pump (35 L/min) Beacon lamp Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Single-acting piping kit (breaker, etc.) Double-acting piping kit (clamshell, etc.) Quick coupler Travel alarm Booms 4.3 m, 14’ 1” Arms 1.96 m, 6’ 5” 2.26 m, 7’ 5” 2.81 m, 9’ 3” Cabin FOPS/FOG (ISO/DIS 10262) Level II FOPS (Falling Object Protective Structure) FOG (Falling Object Guard) Cabin lights Cabin front window rain guard Track shoes Rubbber pad (500mm, 20”) Triple grousers shoe (500mm, 20”) Triple grousers shoe (600mm, 24”) Triple grousers shoe (700mm, 28”) Track pad (500mm, 20”) Lower frame under cover (Additional) Long crawler lower frame Dozer blade Tool kit Rearview camera Hi-mate (Remote Management System) Seat Air suspension seat with heater
* Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards.* The photos may include attachments and optional equipment that are not available in your area.* Materials and specifications are subject to change without advance notice.* All imperial measurements rounded off to the nearest pound or inch.
OPTIONAL EQUIPMENT
*Photo may include optional equipment.
MOVING YOU FURTHER
With Tier 4 Interim Engine installed
HYUNDAI HEAVY INDUSTRIES
PLEASE CONTACT
www.hyundai-ce.com 2014. 12 Rev 0
2/3
*Photo may include optional equipment.
Sealed track chain (urethane seals) / Standard track rail guard / Comfortable bolt-on stepsLarge upper roller cut-outs for debris clean-out / Tapered side frames for debris clean-out / Grease-type track tensioner
Undercarriage
RMS (Remote Management System) works through GPS/satellite technology to ultimately provide better customer service and support.
New patented hydraulic control for improved controllability / Improved control valve design for added efficiency and smoother operation / New auto boom and swing priority system for optimum speed / New auto power boost feature for additional power when needed / Improved arm-in and boom-down flow regeneration system for added speed and efficiency
Hydraulic System Improvements
Low emission, complies Tier 4 Interim & EU Stage III B regulationLow noise, meet EU 2nd noise regulation
Engine Technology
Industry-leading, powerful, reliable Kawasaki designed, variable volume in-line axial piston pumpsNew compact solenoid block equipped with 4 solenoid valves, 1 EPPR valves, 1 check valve accumulator and pilot filter - controls 2 speed travel, power boost, boom priority, safety lock
Pump Compartment
Improved VisibilityEnlarged cab with improved visibility / See-through upper skylight for visibility and ventilationLarger right-side glass, now one piece, for better right visibilitySafety glass windows on all sides - less expensive than (polycarbonate) and won’t scratch or fadeCloseable sunshade for operator convenience / Reduced front window seam for improved operator view
Improved Cab ConstructionNew steel tube construction for added operator safety, protection and durabilityNew window open/close mechanism designed with cable and spring lift assist and single latch release
Improved Suspension Seat / Console AssemblyErgonomic joysticks with auxiliary control buttons for attachment use. Now with new sleek stylingHeated suspension (standard) or optional air ride suspension with heatNew joystick consoles - now adjustable in height by pushing the buttonIntegrated seat with consoles - reduce the operator fatigue
Advanced 7” Color Cluster with Touch ScreenNew Color LCD Display with easy to read digital gauges for hydraulic oil temperature, water temperature, and fuel. Simplified design makes adjustment and diagnostics easier. Also, new enhanced features such as rear-view camera are integrated into monitor.3 power modes : (P) Power, (S) Standard, (E) Economy, 2 work modes : Dig & Attachment, (U) User mode for operator preferenceEnhanced self-diagnostic features with GPS download capabilityOne pump flow or two pump flow for optional attachment is now selectable through the cluster / New anti-theft system with password capabilityBoom speed and arm regeneration are selectable through the monitor.Auto power boost is now available - selectable (on/off) through the monitor.Powerful air conditioning and heat with auto climate control, 20% more heat and air output than 7A series!
Enhanced Operator Cab
Machine Walk-Around
Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more precision, versatile machine preferences, and proven quality. Take pride in your work with Hyundai!
PRIDE AT WORK
4/5
*Photo may include optional equipment.
The engine horsepower and hydraulic horsepower together in unison through the advanced CAPO(Computer Aided Power Optimization) system, flow for the job at hand. Operator can set their own preferences for boom or swing priority, power mode selection and optional work tools at the touch of a button.The CAPO system also provides complete self diagnostic features and digital gauges for important information like hydraulic oil temperature, water temperatures and fuel level. This system interfaces with multiple sensors placed throughout the hydraulic system as well as the electronically controlled engine to provide the optimum level of engine power and hydraulic flow.
Computer Aided Power
Improved Hydraulic SystemTo achieve optimum precision, Hyundai redesigned the hydraulic system to provide the operator with super fine touch and improved controllability. Improved pump flow control reduces flow when controls are not being used to minimize fuel consumption.Improved spool valves in the control valve are engineered to provide more precise flow to each function with less effort.Improved hydraulic valves, precision-designed variable volume piston pumps, fine-touch pilot controls, and enhanced travel functions make any operator running a 9A series look like a smooth operator. Newly improved features
include arm-in and boom-down flow regeneration, improved control valve technology and innovative auto boom and swing priority for optimal performance in any application.
P (Power Max) mode maximizes machine speed and power for mass production. S (Standard) mode provides a reduced, fixed rpm for optimum performance and improved fuel economy. For maximum fuel savings and improved control, E (Economy) mode provides precise flow and engine power based on load demand. Three unique power modes provide the operator with custom power, speed and fuel economy.
Power Mode
Some jobs require more precise machine settings. Using the versatile U (User) mode, the operator can customize engine speed, pump output, idle speed and other machine settings for the job at hand.
User Mode
The work mode allows the operator to select single flow attachments like a hydraulic breaker or bi-directional flow attachments like a crusher. Flow settings unique to each attachment can be programmed from within the cluster.
Work Mode
Innovative hydraulic system technologies make the 9A series excavator fast, smooth and easy to control.
PRECISION
Auto Boom-swing PriorityThis smart function automatically and continuously looks the ideal hydraulic flow balance for the boom and swing motions of the machine. The advanced CAPO system monitors the hydraulic systemand adjusts its settings to maximize performance and productivity.
*Photo may include optional equipment.*Photo may include optional equipment.
9A series is designed for maximum performance to keep the operator working productively.
PERFORMANCE
Min. swing radius2,340mm
Rear-end swing radius1,495mm
Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbingsprings.
jTrack Rail Guard & Adjusters
Excellent Performance inConfined AreasR125LCR-9A's short (1,500mm) tail swing radius allows theoperator work in confined areas like close to buildings onroadways, and in urban areas. This Compact radius designprovides easy and efficient operation in any limited spacework environment.
Structure StrengthThe 9A series cabin structure has been fitted with stronger but slimmer tubing for more safety and improved visibility.Low-stress, high strength steel is integrally welded to form astronger, more durable upper and lower frame. Structural integrity was tested by way of FEM (Finite Elements Method) analysis and long-term durability tests.ROPS(Roll Over Protective Structure) cab can be equipped to enhance operator safety.
Better PerformanceUsing DPF (Diesel Particulate Filter) enables uncompromised, fuel economy and reduced cooling pack size, because the engine calibration does not solely need to be focussed on low paticulates. By using mainly passive regeneration and low back pressure aftertreatment designs fuel economy is not negatively impacted.
Integrated aftertreatment without operating impactThe 1204E engines have fully transparent regeneration strategies and service free DPF, completely seamless to the operator.
One solution for all regionsArea mandating the use of DPF are increasing and european air quality directive will drive more non-attainment zones. Because our products use DPFs, our customers don't have to offer a retrofit DPF option to allow machines to operate in these territories.
Perkins 1204E EngineTier 4 interim, four cylinder, 4 cycle, turbo-charged, charge air cooled Perkins 1204E engine provides maximum power, reliability, optimum fuel economy, and reduced emissions. Electronically controlled fuel injection and diagnostic capabilities add to the engines efficiency and serviceability.
8/96/7
8/9
The advanced new cluster with 7 inch wide color LCD with Touch screen andtoggle switch allows the operator to select his personal machine preferences.Power and work mode selection, self diagnostics, optional rear-view camera,maintenance check lists, start-up machine security, and video functions wereintegrated into the cluster to make the machine more versatile and the operator more productive.The newly applied FM transmitter application transmits signal to USB & Radioplayer with the same frequency as cluster. The player outputs the audio through the internal speaker in the cab. The video & firmware updates arepossible with USB host support and an adjustable cluster hinge bracket improves cluster visibility.
Operator - Friendly Cluster
Work is stressful enough. Your work environment should be stress free. Hyundai's 9A series provides improved cab amenities, additional space and a comfortable seat to minimize stress to the operator. A powerful climate control system provides the operator with optimum air temperature. An advanced audio system with USB player, AM/FM stereo and MP3 capabilities, plus remotely located controls is perfect for listening to music favorites.Operators can even talk on the phone with the hands-free cell phone feature. Also, the newly designed remote control offers radio hands-free function.
9A series excavators provide smart key system as an option. This allows the operator to start the engine by the push of a starter button without inserting a key in the ignition.
Reduced Stress
Smart Key System (Option)
In 9A series cabin you can easily adjust the seat, console and armrest settings to best suit your comfort level. The seat integrated with console absorb console vibration by seat
suspension and reduce operator‘s fatigue. Other preference settings that add to overall operator comfort include the fully automatic high capacity airconditioning system, transparent polycarbonate glass sun roof, large and easy to control sun visor, and the Radio / USB player.
Operator Comfort
*Photo may include optional equipment.
Wide Cabin with Excellent Visibility
The newly designed cabin was conceived for more space, a wider field of view and operator comfort. Special attention was given to a clear, open and convenient interiorwith plenty of visibility on the machine surroundings and the job at hand. This well balanced combination of precision aspects put the operator in the perfect position towork safely and securely.
HorizontalTotal : 150o
VerticalTotal : 30o
Monitor Tilt Range
Operating a 9A series is unique to every operator. Operators can fully customize their work environment and operating preferences to fit their individual needs.
PREFERENCE
10/11
*Photo may include optional equipment.
Easy AccessGround-line access to filters, lube fittings, fuses, machine computer components and wide open compartments makes service more convenient on the 9A series.
Hi-mate (Remote Management System)Hi-mate, Hyundai's proprietary remote management system, provides operators and dealer service personnel access to vital service and diagnostic information on the machine from any computer with internet access. Users can pinpoint machine location using digital mapping and set machine work boundaries, reducing the need for multiple service calls. Hi-mate saves time and money for the owner and dealer by promoting preventative maintenance and reducing machine downtime.
Fuel Efficiency 9A series excavators are engineered to be extremely fuel efficient. New innovations like fan clutch, the variable speed remote fan, three-stage auto decel system and the new economy mode help to conserve fuel and reduce the impact on the environment.
9A series is designed to maximize profitability through improved efficiencies, enhanced service features and longer life components.
PROFITABILITY
Long-Life Components9A series excavators were designed with bushings designed for long-life lube intervals (250 hrs) & polymer shims (wear resistant, noise reducing), long-life hydraulic filters (1,000hrs), long-life hydraulic oil (5,000hrs), more efficient cooling systems and integrated preheating systems which extend service intervals, minimize operating costs and reduce machine down time.
Specifications
MODEL
Type
Rated
flywheel
horse power
Max. torque
Bore X stroke
Piston displacement
Batteries
Starting motor
Alternator
54.0 kgf.m(391 lbf.ft)/ 1,400 rpm
105 x 127 mm (4.1” x 5.0”)
4,400cc (268.5 in3)
2 X 12V X 100AH
24V- 4.5kW
24V- 85Amp
DIN
SAEJ1995 (gross)
J1349 (net)
6271/1 (gross)
6271/1 (net)
Water cooled, 4 cycle Diesel,
4-cylinders in line, direct injection,
turbocharged charger and air cooled
124 HP (92.7 kW) / 1,950 rpm
116 HP (87 kW) / 1,950 rpm
126 PS (92.7 kW) / 1,950 rpm
118 PS (87 kW) / 1,950 rpm
Perkins 1204E
ENGINE
MAIN PUMPType
Rated flow
Sub-pump for pilot circuit
Cross-sensing and fuel saving pump system.
Variable displacement tandem axis piston pumps
2 X 123.5L /min (32.6 US gpm / 27.2 UK gpm)
Gear pump
HYDRAULIC SYSTEM
DRIVES & BRAKES
HYDRAULIC MOTORS
Travel
Swing
Two speed axial pistons motor
with brake valve and parking brake
Axial piston motor with automatic brake
HYDRAULIC CYLINDERS
No. of cylinder
bore X stroke
Boom: 2-105 X 1,105 mm (4.1” X 43.5”)
Arm: 1-115 X 1,138 mm (4.5” X 44.8”)
Bucket: 1-100 X 840 mm (3.9” X 33.1”)
Blade: 2-100 X 250 mm (3.9” X 9.8”)
2 pcs Boom
RELIEF VALVE SETTINGImplement circuits
Travel
Power boost (boom, arm, bucket)
Swing circuit
Pilot circuit
Service valve
350 kgf/cm2 (4,980 psi)
350 kgf/cm2 (4,980 psi)
380 kgf/cm2 (5,410 psi)
285 kgf/cm2 (4,050 psi)
40 kgf/cm2 (570 psi)
Installed
OPERATING WEIGHTShoes
Type
Triple
grouser
Operating weight
kg(lb)
12,350(27,230)
13,050(28,770)
12,500(27,560)
13,200(29,100)
12,500(17,560)
13,200(29,100)
12,650(27,890)
13,350(29,430)
12,650(27,890)
13,350(29,430)
12,800(28,220)
13,500(29,760 )
500 (20”)
600 (24”)
700 (28”)
R125CR-9A
R125CR-9A (Dozer type)
R125LCR-9A
R125LCR-9A (Dozer type)
R125CR-9A
R125CR-9A (Dozer type)
R125LCR-9A
R125LCR-9A (Dozer type)
R125CR-9A
R125CR-9A (Dozer type)
R125LCR-9A
R125LCR-9A (Dozer type)
Ground pressure
kgf/cm2(psi)
0.44(6.24)
0.46(6.54)
0.42(5.91)
0.44(6.24)
0.37(5.26)
0.39(5.55)
0.35(4.98)
0.37(5.26)
0.32(4.55)
0.34(4.83)
0.30(4.27)
0.32(4.55)
Drive method
Drive motor
Reduction system
Max. drawbar pull
Max. travel speed(high) / (low)
Gradeability
Parking brake
Fully hydrostatic type
Axial piston motor, in-shoe design
Planetary reduction gear
13,300 kgf (29,321 lbf)
5.5 km/hr (3.4 mph) / 3.3 km/hr (2.1 mph)
350 (70 %)
Multi wet disc
SWING SYSTEMSwing motor
Swing reduction
Swing bearing lubrication
Swing brake
Swing speed
Fixed displacement axial piston motor
Planetary gear reduction
Grease-bathed
Multi wet disc
12.6 rpm
COOLANT & LUBRICANT CAPACITYRefilling
Fuel tank
Engine coolant
Engine oil
Swing device-gear oil
Final drive(each)-gear oil
Hydraulic system(including tank)
Hydraulic tank
liter
210
14.5
10.5
2.5
2.2
160
80
US gal
61.3
2.8
2.8
0.7
0.6
47.6
25.4
UK gal
51.0
2.3
2.3
0.5
0.5
39.6
21.1
CONTROLPilot pressure operated joysticks and pedals with detachable lever provide almost
effortless and fatigueless operation.
Pilot control
Traveling and steering
Engine throttle
Two joysticks with one safety lever
(LH): Swing and arm, (RH): Boom and bucket(ISO)
Two levers with pedals
Electric, Dial type
UNDERCARRIAGEThe X-leg type center frame is integrally welded with reinforced box-section track
frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock
absorbing springs and sprockets, and a track chain with double or triple grouser shoes.
Center frame
Track frame
No. of carrier roller on each side
No. of track roller on each side
No. of rail guard on each side
X - leg type
Pentagonal box type
1 EA
6 EA
1 EA
1 EA
6 EA
1 EA
OPERATING WEIGHT (APPROXIMATE)Operating weight, including 4,300mm (14’ 1”) boom, 2,260mm (7’ 5”) arm, SAE
heaped 0.40m3 (0.52 yd3) bucket, lubricant, coolant, full fuel tank, full hydraulic tank,
and all standard equipments.
MAJOR COMPONENT WEIGHTUpperstructure
4.3m (14’ 1”)mono boom(with arm cylinder)
6,950 kg (15,320 lb)
950 kg (2,090 lb)
Width mm(in)
R125CR-9A R125LCR-9A
41EA 43EANo. of shoes on each side
Capacity
m3 (yd3)
BoomLength
Weight
Length
Weight
mm (ft.in)
kg (lb)
mm (ft.in)
kg (lb)
1,960 (6’ 5”)
320 (710)
78.5[85.6]
8,000[8,730]
17,640[19,240]
90.2[98.4]
9,200[10,040]
20,280[22,120]
60.2[65.7]
6,140[6,700]
13,540[14,770]
62.9[68.6]
6,410[6,990]
14,130[15,410]
[ ]:
Power
Boost
78.5[85.6]
8,000[8,730]
17,640[19,240]
90.2[98.4]
9,200[10,040]
20,280[22,120]
55.7[60.8]
5,680[6,200]
12,520[13,660]
58.1[63.3]
5,920[6,460]
13,050[14,240]
2,260 (7’ 5”)
340 (750)
78.5[85.6]
8,000[8,730]
17,640[19,240]
90.2[98.4]
9,200[10,040]
20,280[22,120]
48.1[52.4]
4,900[5,350]
10,800[11,780]
49.7[54.2]
5,070[5,530]
11,180[12,200]
2,810 (9’ 3”)
400 (880)
4,300 (14’ 1”)950 (2,090)
Remarks
Arm
Bucket
digging
force
SAE
kN
kgf
lbf
ISO
kN
kgf
lbf
SAE
kN
kgf
lbf
ISO
kN
kgf
lbf
Arm
crowd
force
Note: Boom weight includes arm cylinder, piping, and pin
Arm weight includes bucket cylinder, linkage, and pin
SAE
heaped
CECE
heaped
Without
sidecutters
With
sidecutters
Width
mm (in) Weight
kg (lb)
Recommendation mm (ft.in)
4,300 (14’ 1”) Boom
1,960 (6’ 5”) Arm 2,260 (7’ 5”) Arm 2,810 (9’ 3”) Arm
0.30 (0.39)
0.40 (0.52)
0.45 (0.59)
0.50 (0.65)
0.59 (0.77)
0.27(0.35)
0.44(0.58)
0.40(0.52)
0.45(0.59)
0.52(0.68)
610(24.0)
760(29.9)
830(32.7)
900(35.4)
1,020(40.2)
720(28.3)
870(34.3)
940(37.0)
1,010(39.8)
1,130(44.5)
360(790)
410(900)
430(950)
450(990)
490(1,080)
SAEheapedm3 (yd3)
0.30 (0.39) 0.40 (0.52) 0.45 (0.59) 0.50 (0.65) 0.59 (0.77)
●
●
●
●
■
●
●
●
■
▲
●
●
■
▲
-
● : Applicable for materials with density of 2,000 kg /m3 (3,370 lb/ yd3) or less
■ : Applicable for materials with density of 1,600 kg /m3 (2,700 lb/ yd3) or less
▲ : Applicable for materials with density of 1,100 kg /m3 (1,850 lb/ yd3) or less
Booms and arms are welded, a low-stress, full-box section design. 4.3m(14’ 1”) boom and 1.96m(6’ 5”), 2.26m(7’ 5”), 2.81m(9’ 3”)arms are available.
ATTACHMENT
BUCKETS
DIGGING FORCE
1st: 2-105 X 995 mm (4.1” X 39.2”)
2nd: 1-145 X 613 mm (5.7” X 24.1”)
Dimensions & Working RangeR125CR-9A DIMENSIONS
A
A’
B
B’
C
D
E
F
Boom length
Arm length
Max. digging
reach
Max. digging
reach on ground
Max. digging
depth
Max. digging
depth (8' level)
Max. vertical wall
digging depth
Max. digging
height
Max. dumping
height
Min. swing radius
5,420(17’ 8”)
4,970(16’ 3”)
8,480(27’ 9”)
6,120(20’ 1”)
2,460(8’ 1”)
2,810
(9’ 3”)
A
A’
B
B’
C
D
E
F
Boom length
Arm length
Max. digging
reach
Max. digging
reach on ground
Max. digging
depth
Max. digging
depth (8' level)
Max. vertical wall
digging depth
Max. digging
height
Max. dumping
height
Min. swing radius
mm (ft.in)R125CR-9A WORKING RANGE
D
E
B B' C
A
A'
F
A
B
D,D'
I
C
J F
E
G
H
LK
mm (ft.in)
A
B
C
D
D’
E
F
G
H
2,610 (8' 6")
3,340 (11' 0")
890 (3’ 10”)
1,500 (4’ 10”)
1,500 (4’ 10”)
2,490 (8’ 2”)
2,900 (9’ 6”)
440 (1’ 5”)
1,990 (6’ 6”)
Boom length
Arm length
Overall length
Overall height of boom
I
J
500(20”)
6,760(22’ 2”)
2,500(8’ 2”)
600(24”)
6,780(22’ 3”)
2,600(8’ 6”)
700(28”)
2,700(8’ 10”)
4,300 (14’ 1”)
Track shoe width
Overall width
K
L
Boom length
Arm length
Overall length
Overall height of boom
I
J
500(20”)
600(24”)
2,260(7’ 5”)
6,860(22’ 6”)
2,740(9’ 0”)
2,600(8’ 6”)
700(28”)
2,810(9’ 3”)
6,800(22’ 3”)
3,010(10’ 1”)
2,700(8’ 10”)
Track shoe width
Overall width
14/15
Dimensions & Working RangeR125LCR-9A DIMENSIONS
A
B
D,D'
I
C
J F
E
G
H
LK
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
A
B
C
D
D’
E
F
G
H
2,780 (9' 2")
3,680 (12' 1")
890 (2’ 10”)
1,500 (4’ 10”)
1,500 (4’ 10”)
2,490 (8’ 2”)
2,900 (9’ 6”)
440 (1’ 5”)
1,990 (6’ 6”)
mm (ft.in)
mm (ft.in)R125LCR-9A WORKING RANGE
D
E
B B' C
A
A'
F
A
A’
B
B’
C
D
E
F
Boom length
Arm length
Max. digging
reach
Max. digging
reach on ground
Max. digging
depth
Max. digging
depth (8' level)
Max. vertical wall
digging depth
Max. digging
height
Max. dumping
height
Min. swing radius
1,960(6’ 5”)
7,420(24’ 4”)
7,270(23’ 10”)
4,760(15’ 7”)
4,500(14’ 9”)
4,140(13’ 7”)
7,910(25’ 11”)
5,550(18’ 3”)
2,280(7’ 6”)
2,260(7’ 5”)
7,700(25’ 3”)
7,560(24’ 10”)
5,060(16’ 7”)
4,830(15’ 10”)
4,410(14’ 6”)
8,100(26’ 7”)
5,740(18’ 10”)
2,340(7’ 8”)
4,300(14’ 1”)
2,810
(9’ 3”)
8,230(27’ 0”)
8,090(26’ 6”)
5,610(18’ 4”)
5,420(17’ 8”)
4,970(16’ 3”)
8,480(27’ 9”)
6,120(20’ 1”)
2,460(8’ 1”)
2,810
(9’ 3”)
8,230(27’ 0”)
8,090(26’ 6”)
5,610(18’ 4”)
5,420(17’ 8”)
4,970(16’ 3”)
8,480(27’ 9”)
6,120(20’ 1”)
2,460(8’ 1”)
A
A’
B
B’
C
D
E
F
Boom length
Arm length
Max. digging
reach
Max. digging
reach on ground
Max. digging
depth
Max. digging
depth (8' level)
Max. vertical wall
digging depth
Max. digging
height
Max. dumping
height
Min. swing radius
1,960(6’ 5”)
7,420(24’ 4”)
7,270(23’ 10”)
4,760(15’ 7”)
4,500(14’ 9”)
4,140(13’ 7”)
7,910(25’ 11”)
5,550(18’ 3”)
2,280(7’ 6”)
2,260(7’ 5”)
7,700(25’ 3”)
7,560(24’ 10”)
5,060(16’ 7”)
4,830(15’ 10”)
4,410(14’ 6”)
8,100(26’ 7”)
5,740(18’ 10”)
2,340(7’ 8”)
4,300(14’ 1”)
mm (ft.in)R125CR-9A (DOZER TYPE) WORKING RANGE
D
E
B B' C
A
A'
F
Dimensions & Working RangeR125CR-9A (DOZER TYPE) DIMENSIONS
A
B
D,D'
I
J
O M C
N
E
F
G
H
LK
mm (ft.in)
Boom length
Arm length
Overall length
Overall height of boom
I
J
500(20”)
1,960(6’ 5”)
7,560(24’ 8”)
2,530(8’ 3”)
2,500(8’ 2”)
600(24”)
2,260(7’ 5”)
7,580(24’ 9”)
2,740(9’ 0”)
2,600(8’ 6”)
700(28”)
2,810(9’ 3”)
7,520(24’ 7”)
3,070(10’ 1”)
2,700(8’ 10”)
4,300 (14’ 1”)
Track shoe width
Overall width
K
L
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
Ground clearance of blade up
Depth of blade down
Height of blade
A
B
C
D
D’
E
F
G
H
M
N
O
2,610 (8' 6")
3,340 (11' 0")
890 (2’ 10”)
1,500 (4’ 10”)
1,500 (4’ 10”)
2,490 (8’ 2”)
2,900 (9’ 6”)
440 (1’ 5”)
1,990 (6’ 6”)
540 (1’ 8”)
530 (1’ 8”)
580 (1’ 9”)
Boom length
Arm length
Overall length
Overall height of boom
I
J
500(20”)
1,960(6’ 5”)
7,560(24’ 8”)
2,530(8’ 3”)
2,500(8’ 2”)
600(24”)
2,260(7’ 5”)
7,580(24’ 9”)
2,740(9’ 0”)
2,600(8’ 6”)
700(28”)
2,810(9’ 3”)
7,520(24’ 7”)
3,070(10’ 1”)
2,700(8’ 10”)
4,300 (14’ 1”)
Track shoe width
Overall width
K
L
Tumbler distance
Overall length of crawler
Ground clearance of counterweight
Tail swing radius
Rear-end length
Overall width of upperstructure
Overall height of cab
Min. ground clearance
Track gauge
Ground clearance of blade up
Depth of blade down
Height of blade
A
B
C
D
D’
E
F
G
H
M
N
O
2,780 (9' 2")
3,678 (12' 1")
890 (2’ 10”)
1,500 (4’ 10”)
1,500 (4’ 10”)
2,490 (8’ 2”)
2,900 (9’ 6”)
440 (1’ 5”)
1,990 (6’ 6”)
540 (1’ 8”)
530 (1’ 8”)
580 (1’ 9”)
16/17
Dimensions & Working Range
mm (ft.in)
R125LCR-9A (DOZER TYPE) DIMENSIONS
R125LCR-9A (DOZER TYPE) WORKING RANGE
D
E
B B' C
A
A'
F
A
B
D,D'
I
J
O M C
N
E
F
G
H
LK
mm (ft.in)
Lifting Capacity
R125CR-9A Rating over-front Rating over-side or 360 degree
Boom : 4.3 m (14’ 1”) / Arm : 2.26 m (7’ 5”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)
*5690*12540*8700
*19180
*5690*12540*8700
*19180
*2850*6280*4670
*10300*5790
*12760*5970
*13160*5360
*11820
*2850*628042409350384084403730822038108400
*1780*3920*1820*4010*2300*5070*2980*6570308067902990659030306680
*1780*3920*1820*4010*2300*507021804810200044101920423019504300
*1480*3260*2090*4610200044101920423018904170
1450320014003090132029101240273012102670
*1770*39001670368014403170137030201450320017303810
*2290*5050
1530337011103420930
2050870
1920920
20301120247017303810
5.97(19.6)
6.90(22.6)
7.34(24.1)
7.41(24.3)
7.13(23.4)
6.42(21.1)
5.08(16.7)
kglbkglbkglbkglbkglbkglbkglb
R125CRD-9A Rating over-front Rating over-side or 360 degree
Boom : 4.3 m (14’ 1”) / Arm : 2.26 m (7’ 5”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)
*5690*12540*8700
*19180
*5690*12540*8700
*19180
*2850*6280*4670
*10300*5790
*12760*5970
*13160*5360
*11820
*2850*6280*4670
*103004640
102304540
100104620
10190
*1780*3920*1820*4010*2300*5070*2980*6570*3560*7850*3770*8310*3430*7560
*1780*3920*1820*4010*2300*507025905710241053102320511023505180
*1480*3260*2090*4610*2370*5220*2630*5800*2660*5860
*1480*326016803700159035101510333014803260
*1770*3900*1850*4080*1940*4280*2060*4540*2180*4810*2300*5070*2290*5050
*1770*3900133029301140251010802380113024901360300020704560
5.97(19.6)
6.90(22.6)
7.34(24.1)
7.41(24.3)
7.13(23.4)
6.42(21.1)
5.08(16.7)
kglbkglbkglbkglbkglbkglbkglb
Boom : 4.3 m (14’ 1”) / Arm : 1.96 m (7’ 5”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)
*6190*13650*9140
*20150
*6190*13650*9140
*20150
*3270*7210*5030
*11090*5940
*13100*5920
*13050*5210
*11290
*3270*721041409130382084203770831038808550
*1780*3920*2040*4500*2500*5510*3160*6970308067903020666030906810
*1780*3920*2040*4500237052202160476020004410940
428020004410
208045902000441019304250
139030601310289012502760
*1900*41901810399015503420148032601570346019104210
171037701210267010102230950
20901010223012502760
5.61(18.4)
6.59(21.6)
7.06(23.2)
7.13(23.4)
6.83(22.4)
6.08(19.9)
kglbkglbkglbkglbkglbkglbkglb
Boom : 4.3 m (14’ 1”) / Arm : 1.96 m (7’ 5”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)
*6190*13650*9140
*20150
*6190*13650*9140
*20150
*3270*7210*5030
*11090*5940
*13100*5920
*13050*5210
*11290
*3270*72104960
109304620
101904570
100804690
10340
*1780*3920*2040*4500*2500*5510*3160*6970*3660*8070*3790*8360*3240*7140
*1780*3920*2040*4500*2500*551025705670241053102350518024105310
*2230*4920*2480*5470*2690*5930
166036601580348015203350
*1900*4190*1970*4340*2070*4560*2190*4830*2320*5110*2420*5340
*1900*4190*1450*3200*1230*2710*1160*2560*1230*2710*1510*3330
5.61(18.4)
6.59(21.6)
7.06(23.2)
7.13(23.4)
6.83(22.4)
6.08(19.9)
kglbkglbkglbkglbkglbkglbkglb
Boom : 4.3 m (14’ 1”) / Arm : 2.81 m (9’ 2”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)
*3340*7360*5070
*11180*7380
*16270
*3340*7360*5070
*11180*7380
*16270
*3960*87305420
*11950*5920
*13050*5640
*12430*4290*9460
*3960*873038808550369081403700816038908580
*1910*4210*2640*5820309068102960653029406480
*1910*421022104870200044101880414018704120
*1620*3570*1810*3990200044101900419018404060
1480326014203130132029101220269011602560
*1550*3420142031301240273011902620124027301440317020004410
12302710920
2030780
1720730
1610760
1680900
198013002870
6.64(21.8)
7.47(24.5)
7.88(25.9)
7.95(26.1)
7.68(25.2)
7.04(23.1)
5.88(19.3)
kglbkglbkglbkglbkglbkglbkglbkglb
Boom : 4.3 m (14’ 1”) / Arm : 2.81 m (9’ 2”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)
*3340*7360*5070
*11180*7380
*16270
*3340*7360*5070
*11180*7380
*16270
*3960*87305420
*11950*5920
*13050*5640
*12430*4290*9460
*3960*87304700
103604500992045109940
*4290*9460
*1910*4210*2640*5820*3320*7320*3680*8110*3590*7910
*1910*421026305800241053102290505022705000
*1620*3570*1810*3990*21404720
*2460*5420*2630*5800
*1620*357016903730159035101490328014303150
*1550*3420*1630*3590*1720*3790*1820*4010*1950*4300*2070*4560*2150*4740
1470324011302490970
2140920
2030960
21201120247015703460
6.64(21.8)
7.47(24.5)
7.88(25.9)
7.95(26.1)
7.68(25.2)
7.04(23.1)
5.88(19.3)
kglbkglbkglbkglbkglbkglbkglbkglb
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
18/19
Lifting Capacity
*
20/21
Lifting CapacityLifting Capacity
R125LCR-9A Rating over-front Rating over-side or 360 degree
Boom : 4.3 m (14’ 1”) / Arm : 2.26 m (7’ 5”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)
*5690*12540*8700
*19180
*5690*12540*8700
*19180
*2850*6280*4670
*10300*5790
*12760*5970
*13160*5360
*11820
*2850*628042909460389085803790836038608510
*1780*3920*1820*4010*2300*5070*2980*6570313069003040670030706770
*1780*3920*1820*4010*2300*507022104870203044801950430019804370
*1480*3260*2090*4610203044801950430019204230
1470324014303150134029501260278012302710
*1770*39001690373014603220139030601470324017603880
*2290*5050
1550342011202470940
2070890
1960940
20701140251017603880
5.97(19.6)
6.90(22.6)
7.34(24.1)
7.41(24.3)
7.13(23.4)
6.42(21.1)
5.08(16.7)
kglbkglbkglbkglbkglbkglbkglb
R125LCRD-9A Rating over-front Rating over-side or 360 degree
Boom : 4.3 m (14’ 1”) / Arm : 2.26 m (7’ 5”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)
*5690*12540*8700
*19180
*5690*12540*8700
*19180
*2850*6280*4670
*10300*5790
*12760*5970
*13160*5360
*11820
*2850*6280*4670
*103004710
103804600
101404680
10320
*1780*3920*1820*4010*2300*5070*2980*6570*3560*7850*3770*8310*3430*7560
*1780*3920*1820*4010*2300*507026305800244053802360520023905270
*1480*3260*2090*4610*2370*5220*2630*5800*2660*5860
*1480*326017003750161035501530337015003310
*1770*3900*1850*4080*1940*4280*2060*4540*2180*4810*2300*5070*2290*5050
*1770*3900135029801150254010902400115025401380304021004630
5.97(19.6)
6.90(22.6)
7.34(24.1)
7.41(24.3)
7.13(23.4)
6.42(21.1)
5.08(16.7)
kglbkglbkglbkglbkglbkglbkglb
Boom : 4.3 m (14’ 1”) / Arm : 1.96 m (7’ 5”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)
*6190*13650*9140
*20150
*6190*13650*9140
*20150
*3270*7210*5030
*11090*5940
*13100*5920
*13050*5210
*11290
*3270*721042009260387085303820842039408690
*1780*3920*2040*4500*2500*5510*3160*6970313069003060675031306900
*1780*3920*2040*45002410531021904830203044801970434020404500
211046502030448019604320
141031101340295012702800
*1900*41901840406015703460150033101590351019404280
174038401230271010202250970
21401030227012702800
5.61(18.4)
6.59(21.6)
7.06(23.2)
7.13(23.4)
6.83(22.4)
6.08(19.9)
kglbkglbkglbkglbkglbkglbkglb
Boom : 4.3 m (14’ 1”) / Arm : 1.96 m (7’ 5”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)
*6190*13650*9140
*20150
*6190*13650*9140
*20150
*3270*7210*5030
*11090*5940
*13100*5920
*13050*5210
*11290
*3270*72105030
110904690
103404640
102304750
10470
*1780*3920*2040*4500*2500*5510*3160*6970*3660*8070*3790*8360*3240*7140
*1780*3920*2040*4500*2500*551026105750244053802380505024505400
*2230*4920*2480*5470*2690*5930
169037301610355015403400
*1900*4190*1970*4340*2070*4560*2190*4830*2320*5110*2420*5340
*1900*41901470324012502760118026001250276015403400
5.61(18.4)
6.59(21.6)
7.06(23.2)
7.13(23.4)
6.83(22.4)
6.08(19.9)
kglbkglbkglbkglbkglbkglbkglb
Boom : 4.3 m (14’ 1”) / Arm : 2.81 m (9’ 2”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)
*3340*7360*5070
*11180*7380
*16270
*3340*7360*5070
*11180*7380
*16270
*3960*87305420
*11950*5920
*13050*5640
*12430*4290*9460
*3960*873039408690375082703760829039508710
*1910*4210*2640*5820314069203000661029906590
*1910*421022504960203044801910421019004190
*1620*3570*1810*3990203044801930425018704120
1510333014403170134029501240273011802600
*1550*3420145032001260278012102670126027801470324020304480
12502760940
2070800
1760750
1650780
1720920
203013202910
6.64(21.8)
7.47(24.5)
7.88(25.9)
7.95(26.1)
7.68(25.2)
7.04(23.1)
5.88(19.3)
kglbkglbkglbkglbkglbkglbkglbkglb
Boom : 4.3 m (14’ 1”) / Arm : 2.81 m (9’ 2”) / Bucket : 0.40 m3 SAE heaped / Shoe : 500mm(20”) triple grouser
Load pointheightm (ft)
Load radius1.5 m (5 ft) 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) Capacity Reach
m (ft)
At max. reach
6.0 m(20 ft)4.5 m(15 ft)3.0m(10 ft)1.5 m(5 ft)
GroundLine
-1.5 m(-5 ft)-3.0 m(-10 ft)-4.5 m(-15 ft)
*3340*7360*5070
*11180*7380
*16270
*3340*7360*5070
*11180*7380
*16270
*3960*87305420
*11950*5920
*13050*5640
*12430*4290*9460
*3960*87304760
104904560
100504570
10080*4290*9460
*1910*4210*2640*5820*3320*7320*3680*8110*3590*7910
*1910*4210*2640*5820244053802320511023105090
*1620*3570*1810*3990*21404720
*2460*5420*2630*5800
*1620*357017203790161035501510333014503200
*1550*3420*1630*3590*1720*3790*1820*4010*1950*4300*2070*4560*2150*4740
1490328011502540990
2180940
2070980
21601140251016003530
6.64(21.8)
7.47(24.5)
7.88(25.9)
7.95(26.1)
7.68(25.2)
7.04(23.1)
5.88(19.3)
kglbkglbkglbkglbkglbkglbkglbkglb
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.